summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/anatop.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 18:02:18 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 18:02:18 (GMT)
commitfcba914542082b272f31c8e4c40000b88ed3208d (patch)
treefb28069bf571d93420daafd501b4e97f221d526c /arch/arm/mach-imx/anatop.c
parenta8c4b90e670be3b01e9395c7310639c8109fc77e (diff)
parent5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd (diff)
downloadlinux-fcba914542082b272f31c8e4c40000b88ed3208d.tar.xz
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
Diffstat (limited to 'arch/arm/mach-imx/anatop.c')
-rw-r--r--arch/arm/mach-imx/anatop.c103
1 files changed, 103 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
new file mode 100644
index 0000000..0cfa07d
--- /dev/null
+++ b/arch/arm/mach-imx/anatop.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include "common.h"
+
+#define REG_SET 0x4
+#define REG_CLR 0x8
+
+#define ANADIG_REG_2P5 0x130
+#define ANADIG_REG_CORE 0x140
+#define ANADIG_ANA_MISC0 0x150
+#define ANADIG_USB1_CHRG_DETECT 0x1b0
+#define ANADIG_USB2_CHRG_DETECT 0x210
+#define ANADIG_DIGPROG 0x260
+
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
+#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000
+
+static struct regmap *anatop;
+
+static void imx_anatop_enable_weak2p5(bool enable)
+{
+ u32 reg, val;
+
+ regmap_read(anatop, ANADIG_ANA_MISC0, &val);
+
+ /* can only be enabled when stop_mode_config is clear. */
+ reg = ANADIG_REG_2P5;
+ reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ?
+ REG_SET : REG_CLR;
+ regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG);
+}
+
+static void imx_anatop_enable_fet_odrive(bool enable)
+{
+ regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
+ BM_ANADIG_REG_CORE_FET_ODRIVE);
+}
+
+void imx_anatop_pre_suspend(void)
+{
+ imx_anatop_enable_weak2p5(true);
+ imx_anatop_enable_fet_odrive(true);
+}
+
+void imx_anatop_post_resume(void)
+{
+ imx_anatop_enable_fet_odrive(false);
+ imx_anatop_enable_weak2p5(false);
+}
+
+void imx_anatop_usb_chrg_detect_disable(void)
+{
+ regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B
+ | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+ regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B |
+ BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+}
+
+u32 imx_anatop_get_digprog(void)
+{
+ struct device_node *np;
+ void __iomem *anatop_base;
+ static u32 digprog;
+
+ if (digprog)
+ return digprog;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ anatop_base = of_iomap(np, 0);
+ WARN_ON(!anatop_base);
+ digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+
+ return digprog;
+}
+
+void __init imx_anatop_init(void)
+{
+ anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+ if (IS_ERR(anatop)) {
+ pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
+ return;
+ }
+}