Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "The cleanups for v4.9 are a little larger that usual, but thankfully
  that is almost exclusively due to removing a significant number of
  files that have become obsolete after the still ongoing conversion of
  old board files to devicetree.

   - for mach-omap2, which is still the largest platform in arch/arm/,
     the conversion to DT is finally complete after the Nokia N900 is
     now fully supported there, along with the omap3 LDP, and we can
     remove those two board files. If no regressions are found, another
     large cleanup for the platform will happen as a follow-up, removing
     dead code and restructuring the platform based on being DT-only.

   - In mach-imx, similar work is ongoing, but has not come that far.
     This time, we remove the obsolete board file for the i.MX1
     generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
     DT-only. The remaining board files are for i.MX2 and i.MX3 machines
     based on old ARM926 or ARM1136 cores that should work with DT in
     principle.

   - realview has just been converted from board files to DT, and a lot
     of code gets removed in the process. This is the last
     ARM/Keil/Versatile derived platform that was still using board
     files, the other ones being integrator, versatile and vexpress. We
     can probably merge the remaining code into a single directory in
     the near future.

   - clps711x had completed the conversion in v4.8, but we accidentally
     left the files in place that should have been deleted then"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
  ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
  ARM: imx: (trivial) fix typo and grammar
  ARM: clps711x: remove extraneous files
  ARM: imx: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
  ARM: imx: remove platform-mxc_rnga
  ARM: realview: imply device tree boot
  ARM: realview: no need to select SMP_ON_UP explicitly
  ARM: realview: delete the RealView board files
  ARM: imx: no need to select SMP_ON_UP explicitly
  ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
  ARM: i.MX: Remove i.MX1 non-DT support
  ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
  ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
  ARM: mxs: remove obsolete startup code for TX28
  ARM: i.MX31 iomux: remove duplicates with alternate name
  ARM: i.MX31 iomux: remove plain duplicates
  ARM: OMAP2+: Drop legacy board file for LDP
  ...

1 files changed, 0 insertions, 34 deletions

diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
index 2e4a0dd..368667b 100644
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ b/arch/arm/mach-imx/iomux-mx3.h
@@ -598,10 +598,7 @@ enum iomux_pins {
 #define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
@@ -665,37 +662,6 @@ enum iomux_pins {
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)