Merge branch 'imx-for-2.6.38' of git://git.pengutronix.de/git/ukl/linux-2.6 into imx-for-2.6.38

29 files changed, 1408 insertions, 752 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 197f9e2..41b6450 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,13 +1,33 @@
 config IMX_HAVE_DMA_V1
 	bool
 
-if ARCH_MX1
-
 config SOC_IMX1
+	bool
 	select CPU_ARM920T
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
+
+config SOC_IMX21
 	bool
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+
+config SOC_IMX25
+	bool
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MXC_IOMUX_V3
+
+config SOC_IMX27
+	bool
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+
+if ARCH_MX1
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -31,33 +51,17 @@ endif
 
 if ARCH_MX2
 
-config SOC_IMX21
-	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
-	select IMX_HAVE_DMA_V1
-	select IMX_HAVE_IOMUX_V1
-	bool
-
-config SOC_IMX27
-	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
-	select IMX_HAVE_DMA_V1
-	select IMX_HAVE_IOMUX_V1
-	bool
-
 choice
 	prompt "CPUs:"
 	default MACH_MX21
 
 config MACH_MX21
 	bool "i.MX21 support"
-	select SOC_IMX21
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
-	select SOC_IMX27
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -71,7 +75,10 @@ comment "MX21 platforms:"
 
 config MACH_MX21ADS
 	bool "MX21ADS platform"
+	select SOC_IMX21
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for MX21ADS platform. This includes specific
@@ -79,24 +86,78 @@ config MACH_MX21ADS
 
 endif
 
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+	bool "Support MX25PDK (3DS) Platform"
+	select SOC_IMX25
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+
+config MACH_EUKREA_CPUIMX25
+	bool "Support Eukrea CPUIMX25 Platform"
+	select SOC_IMX25
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX25
+	default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+endif
+
 if MACH_MX27
 
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	help
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -109,8 +170,9 @@ choice
 	default MACH_PCM970_BASEBOARD
 
 config MACH_PCM970_BASEBOARD
-	prompt "PHYTEC PCM970 development board"
-	bool
+	bool "PHYTEC PCM970 development board"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	help
 	  This adds board specific devices that can be found on Phytec's
 	  PCM970 evaluation board.
@@ -119,9 +181,14 @@ endchoice
 
 config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
@@ -130,6 +197,7 @@ config MACH_CPUIMX27
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
 	depends on MACH_CPUIMX27
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27
 	  for wifi or eMMC.
@@ -148,8 +216,11 @@ choice
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
 	bool "Eukrea MBIMX27 development board"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -159,15 +230,21 @@ endchoice
 
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	help
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
+	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	help
 	  Include support for Visstrim_m10 platform and its different variants.
 	  This includes specific configurations for the board and its
@@ -175,6 +252,7 @@ config MACH_IMX27_VISSTRIM_M10
 
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
+	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
@@ -182,10 +260,17 @@ config MACH_IMX27LITE
 
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -194,8 +279,11 @@ config MACH_PCA100
 
 config MACH_MXT_TD60
 	bool "Maxtrack i-MXT TD60"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for i-MXT (aka td60) platform. This
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5582692..77100bf 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,13 +4,13 @@
 
 # Object file lists.
 
-obj-y	:=  devices.o
-
 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
 obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
 
+obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o
+
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
 
@@ -22,6 +22,10 @@ obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 7988a85..3953d60 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -6,6 +6,10 @@ zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
 params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
 initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
 
+zreladdr-$(CONFIG_ARCH_MX25)	:= 0x80008000
+params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+
 zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
 params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
 initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
new file mode 100644
index 0000000..9e4a557
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -0,0 +1,332 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_mpll();
+
+	if (cctl & (1 << 14))
+		rate = (rate * 3) >> 2;
+
+	return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+	unsigned long ofs = (per & 0x3) * 8;
+	unsigned long reg = per & ~0x3;
+	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+	unsigned long fref;
+
+	if (readl(CRM_BASE + 0x64) & (1 << per))
+		fref = get_rate_upll();
+	else
+		fref = get_rate_ahb(NULL);
+
+	return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	return get_rate_per(15);
+}
+
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_per(14);
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+	return get_rate_per(13);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+	return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	return get_rate_per(8);
+}
+
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+	return get_rate_per(7);
+}
+
+static unsigned long get_rate_esdhc1(struct clk *clk)
+{
+	return get_rate_per(3);
+}
+
+static unsigned long get_rate_esdhc2(struct clk *clk)
+{
+	return get_rate_per(4);
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	return get_rate_per(0);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_upll();
+
+	return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CRM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgcr_enable,	\
+		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
+	}
+
+/*
+ * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
+ * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
+ * taken from the Freescale released BSP.
+ *
+ * bit	reg	offset	clock
+ *
+ * 0	CGCR1	0	AUDMUX
+ * 12	CGCR1	12	ESAI
+ * 16	CGCR1	16	GPIO1
+ * 17	CGCR1	17	GPIO2
+ * 18	CGCR1	18	GPIO3
+ * 23	CGCR1	23	I2C1
+ * 24	CGCR1	24	I2C2
+ * 25	CGCR1	25	I2C3
+ * 27	CGCR1	27	IOMUXC
+ * 28	CGCR1	28	KPP
+ * 30	CGCR1	30	OWIRE
+ * 36	CGCR2	4	RTIC
+ * 51	CGCR2	19	WDOG
+ */
+
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1,	 NULL, NULL);
+DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0,  3, get_rate_esdhc1,	 NULL,
+		&esdhc1_ahb_clk);
+DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2,	 NULL, NULL);
+DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0,  4, get_rate_esdhc2,	 NULL,
+		&esdhc2_ahb_clk);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
+DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
+DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
+DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
+DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(esdhc1_clk,  0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
+		&esdhc1_per_clk);
+DEFINE_CLOCK(esdhc2_clk,  1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
+		&esdhc2_per_clk);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
+DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
+DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
+};
+
+int __init mx25_clocks_init(void)
+{
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
+
+	/* Clock source for lcdc and csi is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
+			CRM_BASE + 0x64);
+
+	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index d189039..16744d2 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,10 +9,26 @@
 #include <mach/mx21.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+#define imx21_add_imx21_hcd(pdata)	\
+	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+#define imx21_add_imx2_wdt(pdata)	\
+	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+#define imx21_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
+
 extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
 #define imx21_add_imx_i2c(pdata)	\
 	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
 
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+#define imx21_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
 #define imx21_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
@@ -25,10 +41,18 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
 #define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
 #define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
 
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+#define imx21_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
+
 extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
 #define imx21_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+#define imx21_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx21_mxc_w1_data)
+
 extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
 #define imx21_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
new file mode 100644
index 0000000..760e66c
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx25_fec_data __initconst;
+#define imx25_add_fec(pdata)	\
+	imx_add_fec(&imx25_fec_data, pdata)
+
+extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+#define imx25_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
+#define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
+#define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+#define imx25_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
+
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+#define imx25_add_imxdi_rtc(pdata)	\
+	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
+
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+#define imx25_add_imx2_wdt(pdata)	\
+	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+#define imx25_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+#define imx25_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+#define imx25_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+#define imx25_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+#define imx25_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata)	imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata)	imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
+
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+#define imx25_add_mx2_camera(pdata)	\
+	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+#define imx25_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+#define imx25_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
+
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+#define imx25_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
+
+extern const struct imx_sdhci_esdhc_imx_data
+imx25_sdhci_esdhc_imx_data[] __initconst;
+#define imx25_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+#define imx25_add_spi_imx(id, pdata)	\
+	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+#define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 7011690..f1272d4 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -13,10 +13,26 @@ extern const struct imx_fec_data imx27_fec_data __initconst;
 #define imx27_add_fec(pdata)	\
 	imx_add_fec(&imx27_fec_data, pdata)
 
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+#define imx27_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+#define imx27_add_imx2_wdt(pdata)	\
+	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+#define imx27_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
+
 extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
 #define imx27_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
 
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+#define imx27_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
 #define imx27_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
@@ -31,10 +47,29 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
 #define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
 #define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
 
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+#define imx27_add_mx2_camera(pdata)	\
+	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+#define imx27_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+#define imx27_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+#define imx27_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
+
 extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
 #define imx27_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+#define imx27_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx27_mxc_w1_data)
+
 extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
 #define imx27_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
deleted file mode 100644
index fba5047..0000000
--- a/arch/arm/mach-imx/devices.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- *       <source@mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-#if defined(CONFIG_ARCH_MX1)
-static struct resource imx1_camera_resources[] = {
-	{
-		.start  = 0x00224000,
-		.end    = 0x00224010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CSI_INT,
-		.end    = MX1_CSI_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device imx1_camera_device = {
-	.name           = "mx1-camera",
-	.id             = 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask = &imx1_camera_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource       = imx1_camera_resources,
-	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = 0x00204000,
-		.end    = 0x00204024,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_RTC_INT,
-		.end    = MX1_RTC_INT,
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = MX1_RTC_SAMINT,
-		.end    = MX1_RTC_SAMINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device = {
-	.name           = "rtc-imx",
-	.id             = 0,
-	.resource       = imx_rtc_resources,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.start  = 0x00201000,
-		.end    = 0x00201008,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_WDT_INT,
-		.end    = MX1_WDT_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_wdt_device = {
-	.name           = "imx-wdt",
-	.id             = 0,
-	.resource       = imx_wdt_resources,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
-	{
-		.start	= 0x00212000,
-		.end	= 0x00212148,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX1_USBD_INT0,
-		.end	= MX1_USBD_INT0,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT1,
-		.end	= MX1_USBD_INT1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT2,
-		.end	= MX1_USBD_INT2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT3,
-		.end	= MX1_USBD_INT3,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT4,
-		.end	= MX1_USBD_INT4,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT5,
-		.end	= MX1_USBD_INT5,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT6,
-		.end	= MX1_USBD_INT6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_usb_device = {
-	.name		= "imx_udc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_usb_resources),
-	.resource	= imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-		.irq = MX1_GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
-		.irq = MX1_GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
-		.irq = MX1_GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
-		.irq = MX1_GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init imx1_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mx27_camera_resources[] = {
-	{
-	       .start = MX27_CSI_BASE_ADDR,
-	       .end = MX27_CSI_BASE_ADDR + 0x1f,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MX27_EMMA_PRP_BASE_ADDR,
-	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MX27_INT_CSI,
-	       .end = MX27_INT_CSI,
-	       .flags = IORESOURCE_IRQ,
-	},{
-	       .start = MX27_INT_EMMAPRP,
-	       .end = MX27_INT_EMMAPRP,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-struct platform_device mx27_camera_device = {
-	.name = "mx2-camera",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mx27_camera_resources),
-	.resource = mx27_camera_resources,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-#endif
-
-/*
- * General Purpose Timer
- * - i.MX21: 3 timers
- * - i.MX27: 6 timers
- */
-#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
-	static struct resource timer ## n ##_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_gpt ## n = {				\
-		.name = "imx_gpt",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
-		.resource = timer ## n ## _resources,			\
-	}
-
-/* We use gpt1 as system timer, so do not add a device for this one */
-DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
-DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
-DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
-DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
-#endif
-
-/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
-static struct resource mxc_wdt_resources[] = {
-	{
-		.start = MX2x_WDOG_BASE_ADDR,
-		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
-};
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = MX2x_OWIRE_BASE_ADDR,
-		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
-	{
-		.start = MX2x_LCDC_BASE_ADDR,
-		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_LCDC,
-		.end = MX2x_INT_LCDC,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
-	.name = "imx-fb",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fb),
-	.resource = mxc_fb,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource mxc_pwm_resources[] = {
-	{
-		.start = MX2x_PWM_BASE_ADDR,
-		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_PWM,
-		.end = MX2x_INT_PWM,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device = {
-	.name = "mxc_pwm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources,
-};
-
-#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
-	static struct resource mxc_sdhc_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}, {							\
-			.start = dmareq,				\
-			.end = dmareq,					\
-			.flags = IORESOURCE_DMA,			\
-		},							\
-	};								\
-									\
-	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
-									\
-	struct platform_device mxc_sdhc_device ## n = {			\
-		.name = "mxc-mmc",					\
-		.id = n,						\
-		.dev = {						\
-			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
-			.coherent_dma_mask = DMA_BIT_MASK(32),		\
-		},							\
-		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
-		.resource = mxc_sdhc_resources ## n,		\
-	}
-
-DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
-DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
-
-#ifdef CONFIG_MACH_MX27
-static struct resource otg_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR,
-		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB3,
-		.end = MX27_INT_USB3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x200,
-		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB1,
-		.end = MX27_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x400,
-		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB2,
-		.end = MX27_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.irq = _irq,						\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
-	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
-		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
-		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-
-int __init imx21_register_gpios(void)
-{
-	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-
-int __init imx27_register_gpios(void)
-{
-	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX21
-static struct resource mx21_usbhc_resources[] = {
-	{
-		.start	= MX21_USBOTG_BASE_ADDR,
-		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start		= MX21_INT_USBHOST,
-		.end		= MX21_INT_USBHOST,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx21_usbhc_device = {
-	.name		= "imx21-hcd",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
-	.resource	= mx21_usbhc_resources,
-};
-#endif
-
-static struct resource imx_kpp_resources[] = {
-	{
-		.start  = MX2x_KPP_BASE_ADDR,
-		.end    = MX2x_KPP_BASE_ADDR + 0xf,
-		.flags  = IORESOURCE_MEM
-	}, {
-		.start  = MX2x_INT_KPP,
-		.end    = MX2x_INT_KPP,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_kpp_device = {
-	.name = "imx-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(imx_kpp_resources),
-	.resource = imx_kpp_resources,
-};
-
-#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
deleted file mode 100644
index 807f02a..0000000
--- a/arch/arm/mach-imx/devices.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifdef CONFIG_ARCH_MX1
-extern struct platform_device imx1_camera_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mx27_camera_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_kpp_device;
-#endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 026263c..7dce251 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -26,20 +26,16 @@
 #include <linux/spi/ads7846.h>
 #include <linux/backlight.h>
 #include <video/platform_lcd.h>
-#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
 #include <mach/hardware.h>
-#include <mach/mmc.h>
 #include <mach/spi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int eukrea_mbimx27_pins[] __initconst = {
 	/* UART2 */
@@ -111,7 +107,8 @@ static const uint32_t eukrea_mbimx27_keymap[] = {
 	KEY(1, 1, KEY_LEFT),
 };
 
-static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+static const struct matrix_keymap_data
+eukrea_mbimx27_keymap_data __initconst = {
 	.keymap         = eukrea_mbimx27_keymap,
 	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
 };
@@ -196,7 +193,7 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
 	.mode = eukrea_mbimx27_modes,
 	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
 
@@ -306,7 +303,7 @@ static struct platform_device *platform_devices[] __initdata = {
 	&leds_gpio,
 };
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.dat3_card_detect = 1,
 };
 
@@ -351,8 +348,8 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	imx27_add_imx_uart3(&uart_pdata);
 #endif
 
-	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc_pdata);
 
 	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
@@ -386,7 +383,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	gpio_request(GPIO_PORTA | 25, "lcd_enable");
 	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
 
-	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
new file mode 100644
index 0000000..7cab720
--- /dev/null
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux-mx25.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mx25.h>
+#include <mach/imx-uart.h>
+#include <mach/audmux.h>
+
+#include "devices-imx25.h"
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+	/* LCD_PWR */
+	MX25_PAD_PWM__GPIO_1_26,
+	/* LED */
+	MX25_PAD_POWER_FAIL__GPIO_3_19,
+	/* SWITCH */
+	MX25_PAD_VSTBY_ACK__GPIO_3_18,
+	/* UART2 */
+	MX25_PAD_UART2_RTS__UART2_RTS,
+	MX25_PAD_UART2_CTS__UART2_CTS,
+	MX25_PAD_UART2_TXD__UART2_TXD,
+	MX25_PAD_UART2_RXD__UART2_RXD,
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	MX25_PAD_DE_B__GPIO_2_20,
+	/* I2S */
+	MX25_PAD_KPP_COL3__AUD5_TXFS,
+	MX25_PAD_KPP_COL2__AUD5_TXC,
+	MX25_PAD_KPP_COL1__AUD5_RXD,
+	MX25_PAD_KPP_COL0__AUD5_TXD,
+	/* CAN */
+	MX25_PAD_GPIO_D__CAN2_RX,
+	MX25_PAD_GPIO_C__CAN2_TX,
+};
+
+#define GPIO_LED1	83
+#define GPIO_SWITCH1	82
+#define GPIO_SD1CD	52
+#define GPIO_LCDPWR	26
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
+	{
+		.mode	= {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= KHZ2PICOS(6500),
+			.left_margin	= 30,
+			.right_margin	= 38,
+			.upper_margin	= 20,
+			.lower_margin	= 3,
+			.hsync_len	= 15,
+			.vsync_len	= 4,
+		},
+		.bpp	= 16,
+		.pcr	= 0xCAD08B80,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 7,
+			.left_margin	= 100,
+			.right_margin	= 100,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 100,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 7,
+			.left_margin	= 75,
+			.right_margin	= 75,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 75,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
+	.mode		= eukrea_mximxsd_modes,
+	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx25 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd25_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD5*/
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(4),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
+	);
+	mxc_audmux_v2_configure_port(4,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx25_add_imx_uart1(&uart_pdata);
+	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
+	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx25_add_flexcan1(NULL);
+	imx25_add_sdhci_esdhc_imx(0, NULL);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 745ee60..6cf04da 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -28,7 +28,6 @@
 #include <linux/serial_8250.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,11 +39,9 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int eukrea_cpuimx27_pins[] __initconst = {
 	/* UART1 */
@@ -157,8 +154,6 @@ cpuimx27_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_cpuimx27_nor_mtd_device,
-	&mxc_wdt,
-	&mxc_w1_master_device,
 };
 
 static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
@@ -215,18 +210,18 @@ static struct platform_device serial_device = {
 #endif
 
 #if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_ULPI,
 };
@@ -262,10 +257,12 @@ static void __init eukrea_cpuimx27_init(void)
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_imx2_wdt(NULL);
+	imx27_add_mxc_w1(NULL);
 
 #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
 	/* SDHC2 can be used for Wifi */
-	mxc_register_device(&mxc_sdhc_device1, NULL);
+	imx27_add_mxc_mmc(1, NULL);
 #endif
 #if defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	/* in which case UART4 is also used for Bluetooth */
@@ -281,16 +278,16 @@ static void __init eukrea_cpuimx27_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx27_add_mxc_ehci_otg(&otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 	if (!otg_mode_host)
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
 	eukrea_mbimx27_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
new file mode 100644
index 0000000..67a7d55
--- /dev/null
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc eukrea_cpuimx25_pads[] = {
+	/* FEC - RMII */
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	/* I2C1 */
+	MX25_PAD_I2C1_CLK__I2C1_CLK,
+	MX25_PAD_I2C1_DAT__I2C1_DAT,
+};
+
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
+	.phy	= PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx25_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
+
+static void __init eukrea_cpuimx25_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
+			ARRAY_SIZE(eukrea_cpuimx25_pads)))
+		printk(KERN_ERR "error setting cpuimx25 pads !\n");
+
+	imx25_add_imx_uart0(&uart_pdata);
+	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
+	imx25_add_imxdi_rtc(NULL);
+	imx25_add_fec(&mx25_fec_pdata);
+
+	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
+	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
+
+	if (otg_mode_host)
+		imx25_add_mxc_ehci_otg(&otg_pdata);
+	else
+		imx25_add_fsl_usb2_udc(&otg_device_pdata);
+
+	imx25_add_mxc_ehci_hs(&usbh2_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+	eukrea_mbimxsd25_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx25_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer eukrea_cpuimx25_timer = {
+	.init   = eukrea_cpuimx25_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+	/* Maintainer: Eukrea Electromatique */
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = eukrea_cpuimx25_init,
+	.timer          = &eukrea_cpuimx25_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 59716fa..40a3666 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -34,12 +34,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
 #include <mach/iomux.h>
-#include <mach/mxc_ehci.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
@@ -156,7 +153,7 @@ static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
 	free_irq(SDHC1_IRQ, data);
 }
 
-static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
+static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
 	.init = visstrim_m10_sdhc1_init,
 	.exit = visstrim_m10_sdhc1_exit,
 };
@@ -216,7 +213,8 @@ static int otg_phy_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+static const struct mxc_usbh_platform_data
+visstrim_m10_usbotg_pdata __initconst = {
 	.init = otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
@@ -237,8 +235,8 @@ static void __init visstrim_m10_board_init(void)
 				ARRAY_SIZE(visstrim_m10_i2c_devices));
 	imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
 	imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
-	mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
-	mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
+	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index bbdbc75..3a1202e 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -25,7 +25,6 @@
 #include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int mx27lite_pins[] __initconst = {
 	/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 6187ce9..1f446e5 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -30,7 +30,6 @@
 #include <mach/irqs.h>
 
 #include "devices-imx1.h"
-#include "devices.h"
 
 static const int mx1ads_pins[] __initconst = {
 	/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index e1282e9..0a37257 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -24,13 +24,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/imxfb.h>
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
 
 #include "devices-imx21.h"
-#include "devices.h"
 
 /*
  * Memory-mapped I/O on MX21ADS base board
@@ -213,7 +210,7 @@ static struct imx_fb_videomode mx21ads_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mx21ads_fb_data = {
+static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
 	.mode = mx21ads_modes,
 	.num_modes = ARRAY_SIZE(mx21ads_modes),
 
@@ -233,15 +230,8 @@ static int mx21ads_sdhc_get_ro(struct device *dev)
 static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
 	void *data)
 {
-	int ret;
-
-	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+	return request_irq(IRQ_GPIOD(25), detect_irq,
 		IRQF_TRIGGER_FALLING, "mmc-detect", data);
-	if (ret)
-		goto out;
-	return 0;
-out:
-	return ret;
 }
 
 static void mx21ads_sdhc_exit(struct device *dev, void *data)
@@ -249,7 +239,7 @@ static void mx21ads_sdhc_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOD(25), data);
 }
 
-static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
 	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
 	.get_ro = mx21ads_sdhc_get_ro,
 	.init = mx21ads_sdhc_init,
@@ -296,8 +286,8 @@ static void __init mx21ads_board_init(void)
 	imx21_add_imx_uart0(&uart_pdata_rts);
 	imx21_add_imx_uart2(&uart_pdata_norts);
 	imx21_add_imx_uart3(&uart_pdata_rts);
-	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	imx21_add_imx_fb(&mx21ads_fb_data);
+	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
new file mode 100644
index 0000000..52b4d9b
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX25 3-Stack Development System
+ *  - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+
+	/* Keypad */
+	MX25_PAD_KPP_ROW0__KPP_ROW0,
+	MX25_PAD_KPP_ROW1__KPP_ROW1,
+	MX25_PAD_KPP_ROW2__KPP_ROW2,
+	MX25_PAD_KPP_ROW3__KPP_ROW3,
+	MX25_PAD_KPP_COL0__KPP_COL0,
+	MX25_PAD_KPP_COL1__KPP_COL1,
+	MX25_PAD_KPP_COL2__KPP_COL2,
+	MX25_PAD_KPP_COL3__KPP_COL3,
+
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+};
+
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
+	.phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+	{
+		.mode	= {
+			.name		= "CRT-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39683,
+			.left_margin	= 45,
+			.right_margin	= 114,
+			.upper_margin	= 33,
+			.lower_margin	= 11,
+			.hsync_len	= 1,
+			.vsync_len	= 1,
+		},
+		.bpp	= 16,
+		.pcr	= 0xFA208B80,
+	},
+};
+
+static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
+	.mode		= mx25pdk_modes,
+	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static const uint32_t mx25pdk_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HOME),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(1, 3, KEY_VOLUMEUP),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+	KEY(3, 0, KEY_F1),
+	KEY(3, 1, KEY_F2),
+	KEY(3, 2, KEY_F3),
+	KEY(3, 3, KEY_POWER),
+};
+
+static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
+	.keymap		= mx25pdk_keymap,
+	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
+	imx25_add_imx_uart0(&uart_pdata);
+	imx25_add_mxc_ehci_hs(NULL);
+	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
+	imx25_add_imxdi_rtc(NULL);
+	imx25_add_imx_fb(&mx25pdk_fb_pdata);
+	imx25_add_imx2_wdt(NULL);
+
+	mx25pdk_fec_reset();
+	imx25_add_fec(&mx25_fec_pdata);
+	imx25_add_imx_keypad(&mx25pdk_keymap_data);
+
+	imx25_add_sdhci_esdhc_imx(0, NULL);
+}
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 84a5ba0..3614e33 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -22,7 +22,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -30,10 +29,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mmc.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define SD1_EN_GPIO (GPIO_PORTB + 25)
 
@@ -92,7 +89,7 @@ static const uint32_t mx27_3ds_keymap[] = {
 	KEY(2, 3, KEY_F10),
 };
 
-static struct matrix_keymap_data mx27_3ds_keymap_data = {
+static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
 	.keymap		= mx27_3ds_keymap,
 	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
 };
@@ -109,7 +106,7 @@ static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOB(26), data);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.init = mx27_3ds_sdhc1_init,
 	.exit = mx27_3ds_sdhc1_exit,
 };
@@ -128,8 +125,8 @@ static void __init mx27pdk_init(void)
 	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
-	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 }
 
 static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a1e4bc5..b832f96 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -30,11 +30,8 @@
 #include <mach/gpio.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 /*
  * Base address of PBC controller, CS4
@@ -228,7 +225,7 @@ static struct imx_fb_videomode mx27ads_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
+static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
 	.mode = mx27ads_modes,
 	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
@@ -272,19 +269,18 @@ static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOB(7), data);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.init = mx27ads_sdhc1_init,
 	.exit = mx27ads_sdhc1_exit,
 };
 
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 	.init = mx27ads_sdhc2_init,
 	.exit = mx27ads_sdhc2_exit,
 };
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
-	&mxc_w1_master_device,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -308,12 +304,13 @@ static void __init mx27ads_board_init(void)
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
 	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
-	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+	imx27_add_imx_fb(&mx27ads_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+	imx27_add_mxc_mmc(1, &sdhc2_pdata);
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_mxc_w1(NULL);
 }
 
 static void __init mx27ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 38d3a4a..4ce71b0 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -31,11 +31,8 @@
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
 #include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int mxt_td60_pins[] __initconst = {
 	/* UART0 */
@@ -196,7 +193,7 @@ static struct imx_fb_videomode mxt_td60_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mxt_td60_fb_data = {
+static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
 	.mode = mxt_td60_modes,
 	.num_modes = ARRAY_SIZE(mxt_td60_modes),
 
@@ -226,7 +223,7 @@ static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOF(8), data);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.init = mxt_td60_sdhc1_init,
 	.exit = mxt_td60_sdhc1_exit,
 };
@@ -253,8 +250,8 @@ static void __init mxt_td60_board_init(void)
 
 	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
 	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
-	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	imx27_add_imx_fb(&mxt_td60_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_fec(NULL);
 }
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 8c720d4..cccc0a0 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -29,7 +29,6 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -40,13 +39,9 @@
 #include <mach/audmux.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
-#include <mach/imxfb.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
 #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
@@ -171,11 +166,6 @@ pca100_nand_board_info __initconst = {
 	.hw_ecc = 1,
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_w1_master_device,
-	&mxc_wdt,
-};
-
 static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
@@ -274,7 +264,7 @@ static void pca100_sdhc2_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOC(29), data);
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.init = pca100_sdhc2_init,
 	.exit = pca100_sdhc2_exit,
 };
@@ -286,7 +276,7 @@ static int otg_phy_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.init	= otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -298,14 +288,14 @@ static int usbh2_phy_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_ULPI,
 };
@@ -355,7 +345,7 @@ static struct imx_fb_videomode pca100_fb_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data pca100_fb_data = {
+static const struct imx_fb_platform_data pca100_fb_data __initconst = {
 	.mode = pca100_fb_modes,
 	.num_modes = ARRAY_SIZE(pca100_fb_modes),
 
@@ -389,7 +379,7 @@ static void __init pca100_init(void)
 
 	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
 
 	imx27_add_mxc_nand(&pca100_nand_board_info);
 
@@ -417,23 +407,24 @@ static void __init pca100_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx27_add_mxc_ehci_otg(&otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 	if (!otg_mode_host) {
 		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
-	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+	imx27_add_imx_fb(&pca100_fb_data);
 
 	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_imx2_wdt(NULL);
+	imx27_add_mxc_w1(NULL);
 }
 
 static void __init pca100_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 49a97ce..f667a26 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -37,11 +37,9 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int pcm038_pins[] __initconst = {
 	/* UART1 */
@@ -172,9 +170,7 @@ pcm038_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
-	&mxc_w1_master_device,
 	&pcm038_sram_mtd_device,
-	&mxc_wdt,
 };
 
 /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
@@ -214,7 +210,7 @@ static const struct spi_imx_master pcm038_spi0_data __initconst = {
 
 static struct regulator_consumer_supply sdhc1_consumers[] = {
 	{
-		.dev	= &mxc_sdhc_device1.dev,
+		.dev_name = "mxc-mmc.1",
 		.supply	= "sdhc_vcc",
 	},
 };
@@ -285,7 +281,7 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
 	}
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
@@ -322,10 +318,12 @@ static void __init pcm038_init(void)
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_imx2_wdt(NULL);
+	imx27_add_mxc_w1(NULL);
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
 	pcm970_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 1fbdd3f..eae878f 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -25,7 +25,6 @@
 #include <mach/iomux-mx1.h>
 
 #include "devices-imx1.h"
-#include "devices.h"
 
 /*
  * This scb9328 has a 32MiB flash
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 9be92b9..729ae09 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -25,12 +25,7 @@
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual = MX1_IO_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
-		.length = MX1_IO_SIZE,
-		.type = MT_DEVICE
-	}
+	imx_map_entry(MX1, IO, MT_DEVICE),
 };
 
 void __init mx1_map_io(void)
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 12faeeaa..e728af8 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -35,33 +35,18 @@ static struct map_desc imx21_io_desc[] __initdata = {
 	 * - ROM Patch
 	 * - and some reserved space
 	 */
-	{
-		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
-		.length = MX21_AIPI_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX21, AIPI, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - CSI
 	 * - ATA
 	 */
-	{
-		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
-		.length = MX21_SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX21, SAHB1, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - EMI
 	 */
-	{
-		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
-		.length = MX21_X_MEMC_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX21, X_MEMC, MT_DEVICE),
 };
 
 /*
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
new file mode 100644
index 0000000..2edec6c
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -0,0 +1,62 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX25 boards.
+ */
+static struct map_desc mx25_io_desc[] __initdata = {
+	imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+	iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
+}
+
+int imx25_register_gpios(void);
+
+void __init mx25_init_irq(void)
+{
+	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
+	imx25_register_gpios();
+}
+
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index a246229..374e48b 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -35,33 +35,18 @@ static struct map_desc imx27_io_desc[] __initdata = {
 	 * - ROM Patch
 	 * - and some reserved space
 	 */
-	{
-		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
-		.length = MX27_AIPI_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX27, AIPI, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - CSI
 	 * - ATA
 	 */
-	{
-		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
-		.length = MX27_SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX27, SAHB1, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - EMI
 	 */
-	{
-		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
-		.length = MX27_X_MEMC_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX27, X_MEMC, MT_DEVICE),
 };
 
 /*
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 9110d9c..99afbc3 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -25,11 +25,9 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
 #include <mach/hardware.h>
-#include <mach/mmc.h>
 
-#include "devices.h"
+#include "devices-imx27.h"
 
 static const int pcm970_pins[] __initconst = {
 	/* SDHC */
@@ -119,7 +117,7 @@ static void pcm970_sdhc2_exit(struct device *dev, void *data)
 	gpio_free(GPIO_PORTC + 28);
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.get_ro = pcm970_sdhc2_get_ro,
 	.init = pcm970_sdhc2_init,
 	.exit = pcm970_sdhc2_exit,
@@ -179,7 +177,7 @@ static struct imx_fb_videomode pcm970_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data pcm038_fb_data = {
+static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
 	.mode = pcm970_modes,
 	.num_modes = ARRAY_SIZE(pcm970_modes),
 
@@ -226,8 +224,8 @@ void __init pcm970_baseboard_init(void)
 	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
 			"PCM970");
 
-	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	imx27_add_imx_fb(&pcm038_fb_data);
 	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }