Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony

1 files changed, 315 insertions, 6 deletions

diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 86afb29..071af3e 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -30,6 +30,13 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/htcpld.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +46,7 @@
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>
+#include <plat/mmc.h>
 
 #include <mach/irqs.h>
 
@@ -52,13 +60,123 @@
 #define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
 #define       OMAP_LCDC_STAT_DONE             (1 << 0)
 
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
+/* GPIO definitions for the power button and keyboard slide switch */
+#define HTCHERALD_GPIO_POWER 139
+#define HTCHERALD_GPIO_SLIDE 174
+#define HTCHERALD_GIRQ_BTNS 141
 
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
-	{ OMAP_TAG_LCD, &htcherald_lcd_config },
-};
+/* GPIO definitions for the touchscreen */
+#define HTCHERALD_GPIO_TS 76
+
+/* HTCPLD definitions */
+
+/*
+ * CPLD Logic
+ *
+ * Chip 3 - 0x03
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * DPAD light          x x x x  x x x 1
+ * SoundDev            x x x x  1 x x x
+ * Screen white        1 x x x  x x x x
+ * MMC power on        x x x x  x 1 x x
+ * Happy times (n)     0 x x x  x 1 x x
+ *
+ * Chip 4 - 0x04
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Keyboard light      x x x x  x x x 1
+ * LCD Bright (4)      x x x x  x 1 1 x
+ * LCD Bright (3)      x x x x  x 0 1 x
+ * LCD Bright (2)      x x x x  x 1 0 x
+ * LCD Bright (1)      x x x x  x 0 0 x
+ * LCD Off             x x x x  0 x x x
+ * LCD image (fb)      1 x x x  x x x x
+ * LCD image (white)   0 x x x  x x x x
+ * Caps lock LED       x x 1 x  x x x x
+ *
+ * Chip 5 - 0x05
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Red (solid)         x x x x  x 1 x x
+ * Red (flash)         x x x x  x x 1 x
+ * Green (GSM flash)   x x x x  1 x x x
+ * Green (GSM solid)   x x x 1  x x x x
+ * Green (wifi flash)  x x 1 x  x x x x
+ * Blue (bt flash)     x 1 x x  x x x x
+ * DPAD Int Enable     1 x x x  x x x 0
+ *
+ * (Combinations of the above can be made for different colors.)
+ * The direction pad interrupt enable must be set each time the
+ * interrupt is handled.
+ *
+ * Chip 6 - 0x06
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Vibrator            x x x x  1 x x x
+ * Alt LED             x x x 1  x x x x
+ * Screen white        1 x x x  x x x x
+ * Screen white        x x 1 x  x x x x
+ * Screen white        x 0 x x  x x x x
+ * Enable kbd dpad     x x x x  x x 0 x
+ * Happy Times         0 1 0 x  x x 0 x
+ */
+
+/*
+ * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
+ * for the 16 MPUIO lines.
+ */
+#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
+#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
+#define HTCPLD_BASE(chip, offset)	\
+	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
+
+#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
+#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
+#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
+#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
+#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
+#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
+#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
+#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
+#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
+#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
+#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
+
+#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
+#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
+#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
+#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
+
+#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
+#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
+#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
+#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
+#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
+
+/*
+ * The htcpld chip requires a gpio write to a specific line
+ * to re-enable interrupts after one has occurred.
+ */
+#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
+#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
+
+/* Chip 5 */
+#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
+#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
+#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
+#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
+
+/* Chip 6 */
+#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
+#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
+#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
+#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
+#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
 
 /* Keyboard definition */
 
@@ -140,6 +258,129 @@ static struct platform_device kp_device = {
 	.resource	= kp_resources,
 };
 
+/* GPIO buttons for keyboard slide and power button */
+static struct gpio_keys_button herald_gpio_keys_table[] = {
+	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
+	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
+
+	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
+	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
+	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
+	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
+
+	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
+	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
+	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
+	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
+	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
+};
+
+static struct gpio_keys_platform_data herald_gpio_keys_data = {
+	.buttons	= herald_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
+	.rep		= 1,
+};
+
+static struct platform_device herald_gpiokeys_device = {
+	.name      = "gpio-keys",
+	.id		= -1,
+	.dev = {
+		.platform_data = &herald_gpio_keys_data,
+	},
+};
+
+/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
+static struct gpio_led gpio_leds[] = {
+	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
+};
+
+static struct gpio_led_platform_data gpio_leds_data = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name		= "leds-gpio",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &gpio_leds_data,
+	},
+};
+
+/* HTC PLD chips */
+
+static struct resource htcpld_resources[] = {
+	[0] = {
+		.start  = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+		.end    = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct htcpld_chip_platform_data htcpld_chips[] = {
+	[0] = {
+		.addr		= 0x03,
+		.reset		= 0x04,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(0, 0),
+		.gpio_in_base	= HTCPLD_BASE(4, 0),
+	},
+	[1] = {
+		.addr		= 0x04,
+		.reset		= 0x8e,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(1, 0),
+		.gpio_in_base	= HTCPLD_BASE(5, 0),
+	},
+	[2] = {
+		.addr		= 0x05,
+		.reset		= 0x80,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(2, 0),
+		.gpio_in_base	= HTCPLD_BASE(6, 0),
+		.irq_base	= HTCPLD_IRQ(0, 0),
+		.num_irqs	= 8,
+	},
+	[3] = {
+		.addr		= 0x06,
+		.reset		= 0x40,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(3, 0),
+		.gpio_in_base	= HTCPLD_BASE(7, 0),
+		.irq_base	= HTCPLD_IRQ(1, 0),
+		.num_irqs	= 8,
+	},
+};
+
+struct htcpld_core_platform_data htcpld_pfdata = {
+	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
+	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
+	.i2c_adapter_id	   = 1,
+
+	.chip		   = htcpld_chips,
+	.num_chip	   = ARRAY_SIZE(htcpld_chips),
+};
+
+static struct platform_device htcpld_device = {
+	.name		= "i2c-htcpld",
+	.id		= -1,
+	.resource	= htcpld_resources,
+	.num_resources	= ARRAY_SIZE(htcpld_resources),
+	.dev	= {
+		.platform_data	= &htcpld_pfdata,
+	},
+};
+
 /* USB Device */
 static struct omap_usb_config htcherald_usb_config __initdata = {
 	.otg = 0,
@@ -150,14 +391,71 @@ static struct omap_usb_config htcherald_usb_config __initdata = {
 };
 
 /* LCD Device resources */
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+	{ OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
 static struct platform_device lcd_device = {
 	.name           = "lcd_htcherald",
 	.id             = -1,
 };
 
+/* MMC Card */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+static struct omap_mmc_platform_data htc_mmc1_data = {
+	.nr_slots                       = 1,
+	.switch_slot                    = NULL,
+	.slots[0]       = {
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+		.nomux                  = 1,
+		.wires                  = 4,
+		.switch_pin             = -1,
+	},
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+#endif
+
+
+/* Platform devices for the Herald */
 static struct platform_device *devices[] __initdata = {
 	&kp_device,
 	&lcd_device,
+	&htcpld_device,
+	&gpio_leds_device,
+	&herald_gpiokeys_device,
+};
+
+/*
+ * Touchscreen
+ */
+static const struct ads7846_platform_data htcherald_ts_platform_data = {
+	.model			= 7846,
+	.keep_vref_on		= 1,
+	.x_plate_ohms		= 496,
+	.gpio_pendown		= HTCHERALD_GPIO_TS,
+	.pressure_max		= 100000,
+	.pressure_min		= 5000,
+	.x_min			= 528,
+	.x_max			= 3760,
+	.y_min			= 624,
+	.y_max			= 3760,
+};
+
+static struct spi_board_info __initdata htcherald_spi_board_info[] = {
+	{
+		.modalias		= "ads7846",
+		.platform_data		= &htcherald_ts_platform_data,
+		.irq			= OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
+		.max_speed_hz		= 2500000,
+		.bus_num		= 2,
+		.chip_select		= 1,
+	}
 };
 
 /*
@@ -278,6 +576,7 @@ static void __init htcherald_init(void)
 {
 	printk(KERN_INFO "HTC Herald init.\n");
 
+	/* Do board initialization before we register all the devices */
 	omap_gpio_init();
 
 	omap_board_config = htcherald_config;
@@ -288,6 +587,16 @@ static void __init htcherald_init(void)
 
 	htcherald_usb_enable();
 	omap1_usb_init(&htcherald_usb_config);
+
+	spi_register_board_info(htcherald_spi_board_info,
+		ARRAY_SIZE(htcherald_spi_board_info));
+
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+	htc_mmc_data[0] = &htc_mmc1_data;
+	omap1_init_mmc(htc_mmc_data, 1);
+#endif
 }
 
 static void __init htcherald_init_irq(void)