summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-n8x0.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-19 00:51:10 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-19 00:51:10 (GMT)
commit752451f01c4567b506bf4343082682dbb8fb30dd (patch)
treeec2ec2989c93e567952ddc1ec879013aa2704f0a /arch/arm/mach-omap2/board-n8x0.c
parent673ab8783b596cda5b616b317b1a1b47480c66fd (diff)
parent972deb4f49b5b6703d9c6117ba0aeda2180d4447 (diff)
downloadlinux-752451f01c4567b506bf4343082682dbb8fb30dd.tar.xz
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
Diffstat (limited to 'arch/arm/mach-omap2/board-n8x0.c')
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c42
1 files changed, 42 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index a4e167c..0abb30f 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -16,10 +16,12 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/stddef.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/mfd/menelaus.h>
@@ -40,6 +42,45 @@
#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
+#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+static struct i2c_cbus_platform_data n8x0_cbus_data = {
+ .clk_gpio = 66,
+ .dat_gpio = 65,
+ .sel_gpio = 64,
+};
+
+static struct platform_device n8x0_cbus_device = {
+ .name = "i2c-cbus-gpio",
+ .id = 3,
+ .dev = {
+ .platform_data = &n8x0_cbus_data,
+ },
+};
+
+static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = {
+ {
+ I2C_BOARD_INFO("retu-mfd", 0x01),
+ },
+};
+
+static void __init n8x0_cbus_init(void)
+{
+ const int retu_irq_gpio = 108;
+
+ if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
+ return;
+ irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+ n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio);
+ i2c_register_board_info(3, n8x0_i2c_board_info_3,
+ ARRAY_SIZE(n8x0_i2c_board_info_3));
+ platform_device_register(&n8x0_cbus_device);
+}
+#else /* CONFIG_I2C_CBUS_GPIO */
+static void __init n8x0_cbus_init(void)
+{
+}
+#endif /* CONFIG_I2C_CBUS_GPIO */
+
#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/*
* Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
@@ -678,6 +719,7 @@ static void __init n8x0_init_machine(void)
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
+ n8x0_cbus_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")