Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 325a515..40a22e5 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -48,13 +48,13 @@
 /* Private functions */
 
 /* Read a register in a CM instance */
-static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx)
 {
 	return __raw_readl(cm_base + inst + idx);
 }
 
 /* Write into a register in a CM */
-static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx)
 {
 	__raw_writel(val, cm_base + inst + idx);
 }
@@ -138,7 +138,7 @@ static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -158,7 +158,7 @@ static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -177,7 +177,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
 }
@@ -191,7 +191,7 @@ void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
 }
@@ -204,7 +204,7 @@ void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into idle
  * No return value.
  */
-void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
 }
@@ -217,7 +217,7 @@ void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
 }