ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

Get rid of the mach-omap2/common.c globals by moving the global
initialization for IP block addresses that must occur early into
mach-omap2/io.c.  In the process, remove the *_map_common_io*() and
SoC-specific *set_globals* functions.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>

1 files changed, 0 insertions, 183 deletions

diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 34fb5b9..5c2fd48 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -14,196 +14,13 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/platform_data/dsp-omap.h>
 
 #include <plat/vram.h>
 
-#include "soc.h"
-#include "iomap.h"
 #include "common.h"
-#include "clock.h"
-#include "sdrc.h"
-#include "control.h"
 #include "omap-secure.h"
 
-/* Global address base setup code */
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
-	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_sdrc(omap2_globals);
-	omap2_set_globals_control(omap2_globals);
-	omap2_set_globals_prcm(omap2_globals);
-}
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
-	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
-};
-
-void __init omap2_set_globals_242x(void)
-{
-	__omap2_set_globals(&omap242x_globals);
-}
-
-void __init omap242x_map_io(void)
-{
-	omap242x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
-	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
-};
-
-void __init omap2_set_globals_243x(void)
-{
-	__omap2_set_globals(&omap243x_globals);
-}
-
-void __init omap243x_map_io(void)
-{
-	omap243x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
-	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
-};
-
-void __init omap2_set_globals_3xxx(void)
-{
-	__omap2_set_globals(&omap3_globals);
-}
-
-void __init omap3_map_io(void)
-{
-	omap34xx_map_common_io();
-}
-
-/*
- * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI81XX register for checking device ID (it adds 0x204 to tap base while
- * TI81XX DEVICE ID register is at offset 0x600 from control base).
- */
-#define TI81XX_TAP_BASE		(TI81XX_CTRL_BASE + \
-				TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals ti81xx_globals = {
-	.class  = OMAP343X_CLASS,
-	.tap    = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
-	.ctrl   = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-	.prm    = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-	.cm     = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_ti81xx(void)
-{
-	__omap2_set_globals(&ti81xx_globals);
-}
-
-void __init ti81xx_map_io(void)
-{
-	omapti81xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_AM33XX)
-#define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
-				TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals am33xx_globals = {
-	.class  = AM335X_CLASS,
-	.tap    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
-	.ctrl   = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-	.prm    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-	.cm     = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_am33xx(void)
-{
-	__omap2_set_globals(&am33xx_globals);
-}
-
-void __init am33xx_map_io(void)
-{
-	omapam33xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
-	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
-	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
-	.prcm_mpu	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_443x(void)
-{
-	__omap2_set_globals(&omap4_globals);
-}
-
-void __init omap4_map_io(void)
-{
-	omap44xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP5)
-static struct omap_globals omap5_globals = {
-	.class	= OMAP54XX_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
-	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
-	.prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_5xxx(void)
-{
-	omap2_set_globals_tap(&omap5_globals);
-	omap2_set_globals_control(&omap5_globals);
-	omap2_set_globals_prcm(&omap5_globals);
-}
-
-void __init omap5_map_io(void)
-{
-	omap5_map_common_io();
-}
-#endif
-
 /*
  * Stub function for OMAP2 so that common files
  * continue to build when custom builds are used