diff options
author | G, Manjunath Kondaiah <manjugk@ti.com> | 2010-12-21 02:27:19 (GMT) |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2010-12-21 02:38:31 (GMT) |
commit | f31cc9622d75c1c6f041d786698daa425c0425c2 (patch) | |
tree | 4e52cc4a4d5a6c478823150d263cecbb08271f7b /arch/arm/mach-omap2/dma.c | |
parent | 59de3cf1ce9a961ba9ab657707727db2111e72fa (diff) | |
download | linux-f31cc9622d75c1c6f041d786698daa425c0425c2.tar.xz |
OMAP: DMA: Convert DMA library into platform driver
Convert DMA library into DMA platform driver and make use of
platform data provided by hwmod data base for OMAP2+ onwards.
For OMAP1 processors, the DMA driver in mach-omap uses resource
structures for getting platform data.
Thanks to Tony Lindgren <tony@atomide.com> for fixing various
omap1 issues and testing the same on OSK5912 board.
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/dma.c')
-rw-r--r-- | arch/arm/mach-omap2/dma.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 2130059..d2f15f5 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -32,6 +32,61 @@ #include <plat/omap_device.h> #include <plat/dma.h> +#define OMAP2_DMA_STRIDE 0x60 + +static u32 errata; +static u8 dma_stride; + +static struct omap_dma_dev_attr *d; + +static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end; + +static u16 reg_map[] = { + [REVISION] = 0x00, + [GCR] = 0x78, + [IRQSTATUS_L0] = 0x08, + [IRQSTATUS_L1] = 0x0c, + [IRQSTATUS_L2] = 0x10, + [IRQSTATUS_L3] = 0x14, + [IRQENABLE_L0] = 0x18, + [IRQENABLE_L1] = 0x1c, + [IRQENABLE_L2] = 0x20, + [IRQENABLE_L3] = 0x24, + [SYSSTATUS] = 0x28, + [OCP_SYSCONFIG] = 0x2c, + [CAPS_0] = 0x64, + [CAPS_2] = 0x6c, + [CAPS_3] = 0x70, + [CAPS_4] = 0x74, + + /* Common register offsets */ + [CCR] = 0x80, + [CLNK_CTRL] = 0x84, + [CICR] = 0x88, + [CSR] = 0x8c, + [CSDP] = 0x90, + [CEN] = 0x94, + [CFN] = 0x98, + [CSEI] = 0xa4, + [CSFI] = 0xa8, + [CDEI] = 0xac, + [CDFI] = 0xb0, + [CSAC] = 0xb4, + [CDAC] = 0xb8, + + /* Channel specific register offsets */ + [CSSA] = 0x9c, + [CDSA] = 0xa0, + [CCEN] = 0xbc, + [CCFN] = 0xc0, + [COLOR] = 0xc4, + + /* OMAP4 specific registers */ + [CDP] = 0xd0, + [CNDP] = 0xd4, + [CCDN] = 0xd8, +}; + static struct omap_device_pm_latency omap2_dma_latency[] = { { .deactivate_func = omap_device_idle_hwmods, @@ -40,13 +95,151 @@ static struct omap_device_pm_latency omap2_dma_latency[] = { }, }; +static void __iomem *dma_base; +static inline void dma_write(u32 val, int reg, int lch) +{ + u8 stride; + u32 offset; + + stride = (reg >= dma_common_ch_start) ? dma_stride : 0; + offset = reg_map[reg] + (stride * lch); + __raw_writel(val, dma_base + offset); +} + +static inline u32 dma_read(int reg, int lch) +{ + u8 stride; + u32 offset, val; + + stride = (reg >= dma_common_ch_start) ? dma_stride : 0; + offset = reg_map[reg] + (stride * lch); + val = __raw_readl(dma_base + offset); + return val; +} + +static inline void omap2_disable_irq_lch(int lch) +{ + u32 val; + + val = dma_read(IRQENABLE_L0, lch); + val &= ~(1 << lch); + dma_write(val, IRQENABLE_L0, lch); +} + +static void omap2_clear_dma(int lch) +{ + int i = dma_common_ch_start; + + for (; i <= dma_common_ch_end; i += 1) + dma_write(0, i, lch); +} + +static void omap2_show_dma_caps(void) +{ + u8 revision = dma_read(REVISION, 0) & 0xff; + printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", + revision >> 4, revision & 0xf); + return; +} + +static u32 configure_dma_errata(void) +{ + + /* + * Errata applicable for OMAP2430ES1.0 and all omap2420 + * + * I. + * Erratum ID: Not Available + * Inter Frame DMA buffering issue DMA will wrongly + * buffer elements if packing and bursting is enabled. This might + * result in data gets stalled in FIFO at the end of the block. + * Workaround: DMA channels must have BUFFERING_DISABLED bit set to + * guarantee no data will stay in the DMA FIFO in case inter frame + * buffering occurs + * + * II. + * Erratum ID: Not Available + * DMA may hang when several channels are used in parallel + * In the following configuration, DMA channel hanging can occur: + * a. Channel i, hardware synchronized, is enabled + * b. Another channel (Channel x), software synchronized, is enabled. + * c. Channel i is disabled before end of transfer + * d. Channel i is reenabled. + * e. Steps 1 to 4 are repeated a certain number of times. + * f. A third channel (Channel y), software synchronized, is enabled. + * Channel x and Channel y may hang immediately after step 'f'. + * Workaround: + * For any channel used - make sure NextLCH_ID is set to the value j. + */ + if (cpu_is_omap2420() || (cpu_is_omap2430() && + (omap_type() == OMAP2430_REV_ES1_0))) { + + SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING); + SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS); + } + + /* + * Erratum ID: i378: OMAP2+: sDMA Channel is not disabled + * after a transaction error. + * Workaround: SW should explicitely disable the channel. + */ + if (cpu_class_is_omap2()) + SET_DMA_ERRATA(DMA_ERRATA_i378); + + /* + * Erratum ID: i541: sDMA FIFO draining does not finish + * If sDMA channel is disabled on the fly, sDMA enters standby even + * through FIFO Drain is still in progress + * Workaround: Put sDMA in NoStandby more before a logical channel is + * disabled, then put it back to SmartStandby right after the channel + * finishes FIFO draining. + */ + if (cpu_is_omap34xx()) + SET_DMA_ERRATA(DMA_ERRATA_i541); + + /* + * Erratum ID: i88 : Special programming model needed to disable DMA + * before end of block. + * Workaround: software must ensure that the DMA is configured in No + * Standby mode(DMAx_OCP_SYSCONFIG.MIDLEMODE = "01") + */ + if (omap_type() == OMAP3430_REV_ES1_0) + SET_DMA_ERRATA(DMA_ERRATA_i88); + + /* + * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is + * read before the DMA controller finished disabling the channel. + */ + SET_DMA_ERRATA(DMA_ERRATA_3_3); + + /* + * Erratum ID: Not Available + * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared + * after secure sram context save and restore. + * Work around: Hence we need to manually clear those IRQs to avoid + * spurious interrupts. This affects only secure devices. + */ + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + SET_DMA_ERRATA(DMA_ROMCODE_BUG); + + return errata; +} + /* One time initializations */ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) { struct omap_device *od; struct omap_system_dma_plat_info *p; + struct resource *mem; char *name = "omap_dma_system"; + dma_stride = OMAP2_DMA_STRIDE; + dma_common_ch_start = CSDP; + if (cpu_is_omap3630() || cpu_is_omap4430()) + dma_common_ch_end = CCDN; + else + dma_common_ch_end = CCFN; + p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); if (!p) { pr_err("%s: Unable to allocate pdata for %s:%s\n", @@ -54,6 +247,17 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + p->dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr; + p->disable_irq_lch = omap2_disable_irq_lch; + p->show_dma_caps = omap2_show_dma_caps; + p->clear_dma = omap2_clear_dma; + p->dma_write = dma_write; + p->dma_read = dma_read; + + p->clear_lch_regs = NULL; + + p->errata = configure_dma_errata(); + od = omap_device_build(name, 0, oh, p, sizeof(*p), omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); @@ -63,6 +267,25 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return IS_ERR(od); } + mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__); + return -EINVAL; + } + dma_base = ioremap(mem->start, resource_size(mem)); + if (!dma_base) { + dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__); + return -ENOMEM; + } + + d = oh->dev_attr; + d->chan = kzalloc(sizeof(struct omap_dma_lch) * + (d->lch_count), GFP_KERNEL); + + if (!d->chan) { + dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__); + return -ENOMEM; + } return 0; } |