Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig

1 files changed, 15 insertions, 29 deletions

diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index d54c4f8..befa321 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -38,41 +38,27 @@
  */
 
 #ifdef MULTI_OMAP2
+
+/*
+ * We use __glue to avoid errors with multiple definitions of
+ * .globl omap_irq_base as it's included from entry-armv.S but not
+ * from entry-common.S.
+ */
+#ifdef __glue
 		.pushsection .data
-omap_irq_base:	.word	0
+		.globl	omap_irq_base
+omap_irq_base:
+		.word	0
 		.popsection
+#endif
 
-		/* Configure the interrupt base on the first interrupt */
+		/*
+		 * Configure the interrupt base on the first interrupt.
+		 * See also omap_irq_base_init for setting omap_irq_base.
+		 */
 		.macro  get_irqnr_preamble, base, tmp
-9:
 		ldr	\base, =omap_irq_base	@ irq base address
 		ldr	\base, [\base, #0]	@ irq base value
-		cmp	\base, #0		@ already configured?
-		bne	9997f			@ nothing to do
-
-		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
-		and	\tmp, \tmp, #0x000f0000	@ only check architecture
-		cmp	\tmp, #0x00070000	@ is v6?
-		beq	2400f			@ found v6 so it's omap24xx
-		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
-		and	\tmp, \tmp, #0x000000f0	@ check cortex 8 or 9
-		cmp	\tmp, #0x00000080	@ cortex A-8?
-		beq	3400f			@ found A-8 so it's omap34xx
-		cmp	\tmp, #0x00000090	@ cortex A-9?
-		beq	4400f			@ found A-9 so it's omap44xx
-2400:		ldr	\base, =OMAP2_IRQ_BASE
-		ldr	\tmp, =omap_irq_base
-		str	\base, [\tmp, #0]
-		b	9b
-3400:		ldr	\base, =OMAP3_IRQ_BASE
-		ldr	\tmp, =omap_irq_base
-		str	\base, [\tmp, #0]
-		b	9b
-4400:		ldr	\base, =OMAP4_IRQ_BASE
-		ldr	\tmp, =omap_irq_base
-		str	\base, [\tmp, #0]
-		b	9b
-9997:
 		.endm
 
 		/* Check the pending interrupts. Note that base already set */