Merge branch 'pm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

1 files changed, 33 insertions, 25 deletions

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 468e1e3..24c1966 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -58,6 +58,7 @@
 u32 enable_off_mode;
 u32 sleep_while_idle;
 u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -267,13 +268,16 @@ static int _prcm_int_handle_wakeup(void)
  */
 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 {
-	u32 irqstatus_mpu;
+	u32 irqenable_mpu, irqstatus_mpu;
 	int c = 0;
 
-	do {
-		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	irqstatus_mpu &= irqenable_mpu;
 
+	do {
 		if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
 			c = _prcm_int_handle_wakeup();
 
@@ -292,7 +296,11 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	} while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
+		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+		irqstatus_mpu &= irqenable_mpu;
+
+	} while (irqstatus_mpu);
 
 	return IRQ_HANDLED;
 }
@@ -371,9 +379,16 @@ void omap_sram_idle(void)
 	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
 		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
 
-	/* PER */
+	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON ||
+			core_next_state < PWRDM_POWER_ON) {
+		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_enable_io_chain();
+	}
+
+	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
 		omap2_gpio_prepare_for_idle(per_next_state);
@@ -398,10 +413,8 @@ void omap_sram_idle(void)
 			omap3_core_save_context();
 			omap3_prcm_save_context();
 		}
-		/* Enable IO-PAD and IO-CHAIN wakeups */
-		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
-		omap3_enable_io_chain();
 	}
+
 	omap3_intc_prepare_idle();
 
 	/*
@@ -463,7 +476,8 @@ void omap_sram_idle(void)
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (core_next_state < PWRDM_POWER_ON) {
+	if (per_next_state < PWRDM_POWER_ON ||
+			core_next_state < PWRDM_POWER_ON) {
 		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}
@@ -548,20 +562,21 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds)
+static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
 {
 	u32 tick_rate, cycles;
 
-	if (!seconds)
+	if (!seconds && !milliseconds)
 		return;
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds;
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
 	omap_dm_timer_stop(gptimer_wakeup);
 	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
 
-	pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
-		seconds, cycles, tick_rate);
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
 }
 
 static int omap3_pm_prepare(void)
@@ -575,8 +590,9 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
-	if (wakeup_timer_seconds)
-		omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+	if (wakeup_timer_seconds || wakeup_timer_milliseconds)
+		omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
+					 wakeup_timer_milliseconds);
 
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
@@ -1080,14 +1096,6 @@ static int __init omap3_pm_init(void)
 	omap3_idle_init();
 
 	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
-	/*
-	 * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
-	 * IO-pad wakeup.  Otherwise it will unnecessarily waste power
-	 * waking up PER with every CORE wakeup - see
-	 * http://marc.info/?l=linux-omap&m=121852150710062&w=2
-	*/
-	clkdm_add_wkdep(per_clkdm, core_clkdm);
-
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);