diff options
author | Kevin Hilman <khilman@ti.com> | 2012-05-08 17:34:30 (GMT) |
---|---|---|
committer | Paul Walmsley <paul@pwsan.com> | 2012-05-08 23:25:37 (GMT) |
commit | 414e41286e3aeb87de140ef4c75100f9344c32b2 (patch) | |
tree | 31c47972416865b37d317f65b8dd5c0162ab080a /arch/arm/mach-omap2/wd_timer.c | |
parent | c8d82ff68fb6873691536cf33021977efbf5593c (diff) | |
download | linux-414e41286e3aeb87de140ef4c75100f9344c32b2.tar.xz |
ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset
Without runtime PM enabled, hwmod needs to leave all IP blocks in an
enabled state by default so any driver access to the HW will succeed.
This is accomplished by seting the postsetup_state to enabled for all
hwmods during init when runtime PM is disabled.
Currently, we have a special case for WDT in that its postsetup_state
is always set to disabled. This is done so that the WDT is disabled
and the timer is disarmed at boot in case there is no WDT driver.
This also means that when runtime PM is disabled, if a WDT driver *is*
built in the kernel, the kernel will crash on the first access to the
WDT hardware.
We can't simply leave the WDT module enabled, because the timer is
armed by default after reset. That means that if there is no WDT
driver initialzed or loaded before the timer expires, the kernel will
reboot.
To fix this, a custom reset method is added to the watchdog class of
omap_hwmod. This method will *always* disarm the timer after hwmod
reset. The WDT timer then will only be rearmed when/if the driver is
loaded for the WDT. With the timer disarmed by default, we no longer
need a special-case for the postsetup_state of WDT during init, so it
is removed.
Any platforms wishing to ensure the watchdog remains armed across the
entire boot boot can simply disable the reset-on-init feature of the
watchdog hwmod using omap_hwmod_no_setup_reset().
Tested on 3530/Overo, 4430/Panda.
NOTE: on 4430, the hwmod OCP reset does not seem to rearm the timer as
documented in the TRM (and what happens on OMAP3.) I noticed this
because testing the HWMOD_INIT_NO_RESET feature with no driver loaded,
I expected a reboot part way through the boot, but did not see a
reboot. Adding some debug to read the counter, I verified that right
after OCP softreset, the counter is not firing. After writing the
magic start sequence, the timer starts counting. This means that the
timer disarm sequence added here does not seem to be needed for 4430,
but is technically the correct way to ensure the timer is disarmed, so
it is left in for OMAP4.
Special thanks to Paul Walmsley for helping brainstorm ideas to fix
this problem.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[paul@pwsan.com: updated the omap2_wd_timer_reset() function in the
wake of commit 3c55c1baffa5f719eb2ae9729088bc867f972f53 ("ARM:
OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset
wait for reset status""); added kerneldoc; rolled in warning fix from Kevin]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Diffstat (limited to 'arch/arm/mach-omap2/wd_timer.c')
-rw-r--r-- | arch/arm/mach-omap2/wd_timer.c | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index 4067669..b2f1c67 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -14,6 +14,7 @@ #include <plat/omap_hwmod.h> #include "wd_timer.h" +#include "common.h" /* * In order to avoid any assumptions from bootloader regarding WDT @@ -25,6 +26,8 @@ #define OMAP_WDT_WPS 0x34 #define OMAP_WDT_SPR 0x48 +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 int omap2_wd_timer_disable(struct omap_hwmod *oh) { @@ -54,3 +57,45 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh) return 0; } +/** + * omap2_wdtimer_reset - reset and disable the WDTIMER IP block + * @oh: struct omap_hwmod * + * + * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take + * care to execute the special watchdog disable sequence. This is + * because the watchdog is re-armed upon OCP softreset. (On OMAP4, + * this behavior was apparently changed and the watchdog is no longer + * re-armed after an OCP soft-reset.) Returns -ETIMEDOUT if the reset + * did not complete, or 0 upon success. + * + * XXX Most of this code should be moved to the omap_hwmod.c layer + * during a normal merge window. omap_hwmod_softreset() should be + * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset() + * should call the hwmod _ocp_softreset() code. + */ +int omap2_wd_timer_reset(struct omap_hwmod *oh) +{ + int c = 0; + + /* Write to the SOFTRESET bit */ + omap_hwmod_softreset(oh); + + /* Poll on RESETDONE bit */ + omap_test_timeout((omap_hwmod_read(oh, + oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + else + pr_debug("%s: %s: softreset in %d usec\n", __func__, + oh->name, c); + + return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : + omap2_wd_timer_disable(oh); +} |