summaryrefslogtreecommitdiff
path: root/arch/arm/mach-realview/include
diff options
context:
space:
mode:
authorMagnus Damm <magnus.damm@gmail.com>2010-11-15 23:58:43 (GMT)
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-12-07 09:20:25 (GMT)
commitc4d8c80f59f0611d747399a774ebef71f517a30c (patch)
tree98b43a650a17cc5c8b4dcfa481dd36bf03123288 /arch/arm/mach-realview/include
parent960351fb8e980f0aa6682f11630ff98d3a18e2c0 (diff)
downloadlinux-c4d8c80f59f0611d747399a774ebef71f517a30c.tar.xz
ARM: 6477/1: Use shared GIC entry macros on Realview
Use the GIC demux code in asm/hardware/entry-macro-gic.S on the Realview subarchitecture. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-realview/include')
-rw-r--r--arch/arm/mach-realview/include/mach/entry-macro.S60
1 files changed, 1 insertions, 59 deletions
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 340a5c2..4417b10 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
@@ -21,61 +21,3 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #29
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm