Merge branch 'next-s5p' into for-next-new

6 files changed, 72 insertions, 10 deletions

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index b774ff1..dab6ef3 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -525,6 +525,12 @@ static struct clk init_clocks[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 26),
 	},
 };
 
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 8eb480e..61e6c24 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -81,11 +81,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.length		= SZ_512K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_DMC0,
 		.pfn		= __phys_to_pfn(S5PV210_PA_DMC0),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 119b95f..26710b3 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -65,7 +65,7 @@
 #define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
 #define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
 #define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPI_CSIS		S5P_IRQ_VIC1(29)
 #define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
 #define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
 
@@ -132,5 +132,6 @@
 #define IRQ_LCD_FIFO		IRQ_LCD0
 #define IRQ_LCD_VSYNC		IRQ_LCD1
 #define IRQ_LCD_SYSTEM		IRQ_LCD2
+#define IRQ_MIPI_CSIS0		IRQ_MIPI_CSIS
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 861d7fe..3611492 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -16,6 +16,8 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
+#define S5PV210_PA_SROM_BANK5	(0xA8000000)
+
 #define S5PC110_PA_ONENAND	(0xB0000000)
 #define S5P_PA_ONENAND		S5PC110_PA_ONENAND
 
@@ -60,6 +62,7 @@
 #define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #define S5PV210_PA_SROMC	(0xE8000000)
+#define S5P_PA_SROMC		S5PV210_PA_SROMC
 
 #define S5PV210_PA_CFCON	(0xE8200000)
 
@@ -107,6 +110,8 @@
 #define S5PV210_PA_DMC0		(0xF0000000)
 #define S5PV210_PA_DMC1		(0xF1400000)
 
+#define S5PV210_PA_MIPI_CSIS	0xFA600000
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
@@ -123,6 +128,7 @@
 #define S5P_PA_FIMC0		S5PV210_PA_FIMC0
 #define S5P_PA_FIMC1		S5PV210_PA_FIMC1
 #define S5P_PA_FIMC2		S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0	S5PV210_PA_MIPI_CSIS
 
 #define SAMSUNG_PA_ADC		S5PV210_PA_ADC
 #define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index ebaabe0..4c45b74 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -161,7 +161,7 @@
 #define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
 #define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
 #define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
-#define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
+#define S5P_MIPI_DPHY_CONTROL	S5P_CLKREG(0xE814)
 
 #define S5P_IDLE_CFG_TL_MASK	(3 << 30)
 #define S5P_IDLE_CFG_TM_MASK	(3 << 28)
@@ -195,9 +195,6 @@
 #define S5P_OTHERS_RET_UART		(1 << 28)
 #define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
 
-/* MIPI */
-#define S5P_MIPI_DPHY_EN		(3)
-
 /* S5P_DAC_CONTROL */
 #define S5P_DAC_ENABLE			(1)
 #define S5P_DAC_DISABLE			(0)
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 82e6356..3a59068 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -24,6 +26,8 @@
 #include <mach/regs-clock.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
+#include <plat/gpio-cfg.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -102,6 +106,39 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
 	.cols		= 8,
 };
 
+static struct resource smdkv210_dm9000_resources[] = {
+	[0] = {
+		.start	= S5PV210_PA_SROM_BANK5,
+		.end	= S5PV210_PA_SROM_BANK5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S5PV210_PA_SROM_BANK5 + 2,
+		.end	= S5PV210_PA_SROM_BANK5 + 2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_EINT(9),
+		.end	= IRQ_EINT(9),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct dm9000_plat_data smdkv210_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
+	.dev_addr	= { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
+};
+
+struct platform_device smdkv210_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smdkv210_dm9000_resources),
+	.resource	= smdkv210_dm9000_resources,
+	.dev		= {
+		.platform_data	= &smdkv210_dm9000_platdata,
+	},
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
@@ -119,8 +156,26 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&smdkv210_dm9000,
 };
 
+static void __init smdkv210_dm9000_init(void)
+{
+	unsigned int tmp;
+
+	gpio_request(S5PV210_MP01(5), "nCS5");
+	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
+	gpio_free(S5PV210_MP01(5));
+
+	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
+	__raw_writel(tmp, S5P_SROM_BC5);
+
+	tmp = __raw_readl(S5P_SROM_BW);
+	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
+	tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
+	__raw_writel(tmp, S5P_SROM_BW);
+}
+
 static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
@@ -151,6 +206,8 @@ static void __init smdkv210_machine_init(void)
 {
 	s3c_pm_init();
 
+	smdkv210_dm9000_init();
+
 	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);