Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

1 files changed, 0 insertions, 1332 deletions

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
deleted file mode 100644
index 45f78ca..0000000
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ /dev/null
@@ -1,1332 +0,0 @@
-/*
- * AP4EVB board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/pm_clock.h>
-#include <linux/dma-mapping.h>
-
-#include <media/sh_mobile_ceu.h>
-#include <media/sh_mobile_csi2.h>
-#include <media/soc_camera.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-#include "sh-gpio.h"
-
-/*
- * Address	Interface		BusWidth	note
- * ------------------------------------------------------------------
- * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
- * 0x0800_0000	user area		-
- * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
- * 0x1400_0000	Ether (LAN9220)		16bit
- * 0x1600_0000	user area		-		cannot use with NAND
- * 0x1800_0000	user area		-
- * 0x1A00_0000	-
- * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
- */
-
-/*
- * NOR Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NOR Flash ROM
- *  bit1 | bit1  bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    Area 0
- *  OFF  | ON     OFF | OFF  |    Area 4
- */
-
-/*
- * NAND Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NAND Flash ROM
- *  bit1 | bit1  bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    FCE 0
- *  OFF  | ON     OFF | OFF  |    FCE 1
- */
-
-/*
- * SMSC 9220
- *
- *  SW1		SMSC 9220
- * -----------------------
- *  ON		access disable
- *  OFF		access enable
- */
-
-/*
- * LCD / IRQ / KEYSC / IrDA
- *
- * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
- * LCD = 2nd LCDC (WVGA)
- *
- * 		|		SW43			|
- * SW3		|	ON		|	OFF	|
- * -------------+-----------------------+---------------+
- * ON		| KEY / IrDA		| LCD		|
- * OFF		| KEY / IrDA / IRQ	| IRQ		|
- *
- *
- * QHD / WVGA display
- *
- * You can choice display type on menuconfig.
- * Then, check above dip-switch.
- */
-
-/*
- * USB
- *
- * J7 : 1-2  MAX3355E VBUS
- *      2-3  DC 5.0V
- *
- * S39: bit2: off
- */
-
-/*
- * FSI/FSMI
- *
- * SW41	:  ON : SH-Mobile AP4 Audio Mode
- *	: OFF : Bluetooth Audio Mode
- *
- * it needs amixer settings for playing
- *
- * amixer set "Headphone Enable" on
- */
-
-/*
- * MMC0/SDHI1 (CN7)
- *
- * J22 : select card voltage
- *       1-2 pin : 1.8v
- *       2-3 pin : 3.3v
- *
- *        SW1  |             SW33
- *             | bit1 | bit2 | bit3 | bit4
- * ------------+------+------+------+-------
- * MMC0   OFF  |  OFF |  ON  |  ON  |  X
- * SDHI1  OFF  |  ON  |   X  |  OFF | ON
- *
- * voltage lebel
- * CN7 : 1.8v
- * CN12: 3.3v
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	/* J22 default position: 1.8V */
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* SMSC 9220 */
-static struct resource smc911x_resources[] = {
-	{
-		.start	= 0x14000000,
-		.end	= 0x16000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= evt2irq(0x02c0) /* IRQ6A */,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(smc911x_resources),
-	.resource       = smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/*
- * The card detect pin of the top SD/MMC slot (CN7) is active low and is
- * connected to GPIO A22 of SH7372 (GPIO 41).
- */
-static int slot_cn7_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(41);
-}
-/* MERAM */
-static struct sh_mobile_meram_info meram_info = {
-	.addr_mode      = SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
-	[0] = {
-		.name	= "regs",
-		.start	= 0xe8000000,
-		.end	= 0xe807ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "meram",
-		.start	= 0xe8080000,
-		.end	= 0xe81fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device meram_device = {
-	.name           = "sh_mobile_meram",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(meram_resources),
-	.resource       = meram_resources,
-	.dev            = {
-		.platform_data = &meram_info,
-	},
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xE6BD0000,
-		.end	= 0xE6BD00FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= evt2irq(0x1ac0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= evt2irq(0x1ae0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= slot_cn7_get_cd,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_caps	= MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6850000,
-		.end    = 0xe68500ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
-	.tmio_ocr_mask	= MMC_VDD_165_195,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
-	.tmio_caps	= MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ,
-	.get_cd		= slot_cn7_get_cd,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start  = 0xe6860000,
-		.end    = 0xe68600ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-
-/* USB1 */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008));
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xE68B0000,
-		.end	= 0xE68B00E6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/*
- * QHD display
- */
-#ifdef CONFIG_AP4EVB_QHD
-
-/* KEYSC (Needs SW43 set to ON) */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_1,
-	.scan_timing	= 3,
-	.delay		= 2500,
-	.keycodes = {
-		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b0063,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.id             = 0, /* "keysc0" clock */
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-/* MIPI-DSI */
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
-
-	if (IS_ERR(pck))
-		return PTR_ERR(pck);
-
-	if (enable) {
-		/*
-		 * DSIPCLK	= 24MHz
-		 * D-PHY	= DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl)
-		 * HsByteCLK	= D-PHY/8 = 39MHz
-		 *
-		 *  X * Y * FPS =
-		 * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz
-		 */
-		clk_set_rate(pck, clk_round_rate(pck, 24000000));
-		clk_enable(pck);
-	} else {
-		clk_disable(pck);
-	}
-
-	clk_put(pck);
-
-	return 0;
-}
-
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.start  = 0xffc60000,
-		.end    = 0xffc63073,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 0xffc68000,
-		.end    = 0xffc680ef,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.channel	= LCDC_CHAN_MAINLCD,
-	.lane		= 2,
-	.vsynw_offset	= 17,
-	.phyctrl	= 0x6 << 8,
-	.flags		= SH_MIPI_DSI_SYNC_PULSES_MODE |
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-static struct platform_device *qhd_devices[] __initdata = {
-	&mipidsi0_device,
-	&keysc_device,
-};
-#endif /* CONFIG_AP4EVB_QHD */
-
-/* LCDC0 */
-static const struct fb_videomode ap4evb_lcdc_modes[] = {
-	{
-#ifdef CONFIG_AP4EVB_QHD
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-#else
-		.name		= "WVGA Panel",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 220,
-		.right_margin	= 110,
-		.hsync_len	= 70,
-		.upper_margin	= 20,
-		.lower_margin	= 5,
-		.vsync_len	= 5,
-		.sync		= 0,
-#endif
-	},
-};
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x40,
-	},
-	.icb[1] = {
-		.meram_size     = 0x40,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.meram_dev = &meram_info,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = ap4evb_lcdc_modes,
-		.num_modes = ARRAY_SIZE(ap4evb_lcdc_modes),
-		.meram_cfg = &lcd_meram_cfg,
-#ifdef CONFIG_AP4EVB_QHD
-		.tx_dev = &mipidsi0_device,
-#endif
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* FSI */
-#define IRQ_FSI		evt2irq(0x1840)
-static struct sh_fsi_platform_info fsi_info = {
-	.port_b = {
-		.flags		= SH_FSI_CLK_CPG |
-				  SH_FSI_FMT_SPDIF,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_FSI,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4643_info = {
-	.name		= "AK4643",
-	.card		= "FSI2A-AK4643",
-	.codec		= "ak4642-codec.0-0013",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4643_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4643_info,
-	},
-};
-
-/* LCDC1 */
-static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
-				unsigned long *parent_freq);
-
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags = HDMI_SND_SRC_SPDIF,
-	.clk_optimize_parent = ap4evb_clk_optimize,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
-		.start	= evt2irq(0x17e0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
-				unsigned long *parent_freq)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	long error;
-
-	if (IS_ERR(hdmi_ick)) {
-		int ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		return ret;
-	}
-
-	error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64);
-
-	clk_put(hdmi_ick);
-
-	return error;
-}
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x100,
-	},
-	.icb[1] = {
-		.meram_size     = 0x100,
-	},
-};
-
-static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
-	.clock_source = LCDC_CLK_EXTERNAL,
-	.meram_dev = &meram_info,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.meram_cfg = &hdmi_meram_cfg,
-		.tx_dev = &hdmi_device,
-	}
-};
-
-static struct resource lcdc1_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe947fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x1780),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc1_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc1_resources),
-	.resource	= lcdc1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sh_mobile_lcdc1_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_hdmi_info = {
-	.name		= "HDMI",
-	.card		= "FSI2B-HDMI",
-	.codec		= "sh-mobile-hdmi",
-	.platform	= "sh_fsi2",
-	.cpu_dai = {
-		.name	= "fsib-dai",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF,
-	},
-	.codec_dai = {
-		.name	= "sh_mobile_hdmi-hifi",
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name	= "asoc-simple-card",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &fsi2_hdmi_info,
-	},
-};
-
-static struct gpio_led ap4evb_leds[] = {
-	{
-		.name			= "led4",
-		.gpio			= 185,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led2",
-		.gpio			= 186,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led3",
-		.gpio			= 187,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led1",
-		.gpio			= 188,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data ap4evb_leds_pdata = {
-	.num_leds = ARRAY_SIZE(ap4evb_leds),
-	.leds = ap4evb_leds,
-};
-
-static struct platform_device leds_device = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data  = &ap4evb_leds_pdata,
-	},
-};
-
-static struct i2c_board_info imx074_info = {
-	I2C_BOARD_INFO("imx074", 0x1a),
-};
-
-static struct soc_camera_link imx074_link = {
-	.bus_id		= 0,
-	.board_info	= &imx074_info,
-	.i2c_adapter_id	= 0,
-	.module_name	= "imx074",
-};
-
-static struct platform_device ap4evb_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &imx074_link,
-	},
-};
-
-static struct sh_csi2_client_config csi2_clients[] = {
-	{
-		.phy		= SH_CSI2_PHY_MAIN,
-		.lanes		= 0,		/* default: 2 lanes */
-		.channel	= 0,
-		.pdev		= &ap4evb_camera,
-	},
-};
-
-static struct sh_csi2_pdata csi2_info = {
-	.type		= SH_CSI2C,
-	.clients	= csi2_clients,
-	.num_clients	= ARRAY_SIZE(csi2_clients),
-	.flags		= SH_CSI2_ECC | SH_CSI2_CRC,
-};
-
-static struct resource csi2_resources[] = {
-	[0] = {
-		.name	= "CSI2",
-		.start	= 0xffc90000,
-		.end	= 0xffc90fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x17a0),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mobile_ceu_companion csi2 = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csi2_resources),
-	.resource	= csi2_resources,
-	.platform_data	= &csi2_info,
-};
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
-	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.max_width = 8188,
-	.max_height = 8188,
-	.csi2 = &csi2,
-};
-
-static struct resource ceu_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x880),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu_device = {
-	.name		= "sh_mobile_ceu",
-	.id             = 0, /* "ceu0" clock */
-	.num_resources	= ARRAY_SIZE(ceu_resources),
-	.resource	= ceu_resources,
-	.dev	= {
-		.platform_data		= &sh_mobile_ceu_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *ap4evb_devices[] __initdata = {
-	&leds_device,
-	&nor_flash_device,
-	&smc911x_device,
-	&sdhi0_device,
-	&sdhi1_device,
-	&usb1_host_device,
-	&fsi_device,
-	&fsi_ak4643_device,
-	&fsi_hdmi_device,
-	&sh_mmcif_device,
-	&hdmi_device,
-	&lcdc_device,
-	&lcdc1_device,
-	&ceu_device,
-	&ap4evb_camera,
-	&meram_device,
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	int ret;
-	long rate;
-
-	if (IS_ERR(hdmi_ick)) {
-		ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
-	if (ret < 0) {
-		pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
-		goto out;
-	}
-
-	pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
-
-	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
-	if (rate < 0) {
-		pr_err("Cannot get suitable rate: %ld\n", rate);
-		ret = rate;
-		goto out;
-	}
-
-	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
-	if (ret < 0) {
-		pr_err("Cannot set rate %ld: %d\n", rate, ret);
-		goto out;
-	}
-
-	pr_debug("PLLC2 set frequency %lu\n", rate);
-
-	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0)
-		pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
-	if (!IS_ERR(hdmi_ick))
-		clk_put(hdmi_ick);
-}
-
-/* TouchScreen */
-#ifdef CONFIG_AP4EVB_QHD
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ28_123
-# define GPIO_TSC_PORT	123
-#else /* WVGA */
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ7_40
-# define GPIO_TSC_PORT	40
-#endif
-
-#define IRQ28	evt2irq(0x3380) /* IRQ28A */
-#define IRQ7	evt2irq(0x02e0) /* IRQ7A */
-static int ts_get_pendown_state(void)
-{
-	int val;
-
-	gpio_free(GPIO_TSC_IRQ);
-
-	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
-
-	val = gpio_get_value(GPIO_TSC_PORT);
-
-	gpio_request(GPIO_TSC_IRQ, NULL);
-
-	return !val;
-}
-
-static int ts_init(void)
-{
-	gpio_request(GPIO_TSC_IRQ, NULL);
-
-	return 0;
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-	.get_pendown_state	= ts_get_pendown_state,
-	.init_platform_hw	= ts_init,
-};
-
-static struct i2c_board_info tsc_device = {
-	I2C_BOARD_INFO("tsc2007", 0x48),
-	.type		= "tsc2007",
-	.platform_data	= &tsc2007_info,
-	/*.irq is selected on ap4evb_init */
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4643", 0x13),
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-};
-
-
-static const struct pinctrl_map ap4evb_pinctrl_map[] = {
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
-				  "mmc0_ctrl_0", "mmc0"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
-				  "sdhi1_ctrl", "sdhi1"),
-};
-
-#define GPIO_PORT9CR	IOMEM(0xE6051009)
-#define GPIO_PORT10CR	IOMEM(0xE605100A)
-#define USCCR1		IOMEM(0xE6058144)
-static void __init ap4evb_init(void)
-{
-	struct pm_domain_device domain_devices[] = {
-		{ "A4LC", &lcdc1_device, },
-		{ "A4LC", &lcdc_device, },
-		{ "A4MP", &fsi_device, },
-		{ "A3SP", &sh_mmcif_device, },
-		{ "A3SP", &sdhi0_device, },
-		{ "A3SP", &sdhi1_device, },
-		{ "A4R", &ceu_device, },
-	};
-	u32 srcr4;
-	struct clk *clk;
-
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
-	pinctrl_register_mappings(ap4evb_pinctrl_map,
-				  ARRAY_SIZE(ap4evb_pinctrl_map));
-	sh7372_pinmux_init();
-
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
-	/* enable Debug switch (S6) */
-	gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
-	gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
-	gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
-	gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
-
-	/* USB enable */
-	gpio_request(GPIO_FN_VBUS0_1,    NULL);
-	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
-	gpio_request(GPIO_FN_PWEN_1_115, NULL);
-	gpio_request(GPIO_FN_OVCN_1_114, NULL);
-	gpio_request(GPIO_FN_EXTLP_1,    NULL);
-	gpio_request(GPIO_FN_OVCN2_1,    NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x8a0a, IOMEM(0xE6058130));	/* USBCR4 */
-
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
-
-	gpio_request(9, NULL);
-	gpio_request(10, NULL);
-	gpio_direction_none(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
-	/* card detect pin for MMC slot (CN7) */
-	gpio_request_one(41, GPIOF_IN, NULL);
-
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
-	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
-	/* set SPU2 clock to 119.6 MHz */
-	clk = clk_get(NULL, "spu_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 119600000));
-		clk_put(clk);
-	}
-
-	/*
-	 * set irq priority, to avoid sound chopping
-	 * when NFS rootfs is used
-	 *  FSI(3) > SMSC911X(2)
-	 */
-	intc_set_priority(IRQ_FSI, 3);
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-
-	i2c_register_board_info(1, i2c1_devices,
-				ARRAY_SIZE(i2c1_devices));
-
-#ifdef CONFIG_AP4EVB_QHD
-
-	/*
-	 * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
-	 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
-	 */
-
-	/* enable KEYSC */
-	gpio_request(GPIO_FN_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_KEYIN0_136, NULL);
-	gpio_request(GPIO_FN_KEYIN1_135, NULL);
-	gpio_request(GPIO_FN_KEYIN2_134, NULL);
-	gpio_request(GPIO_FN_KEYIN3_133, NULL);
-	gpio_request(GPIO_FN_KEYIN4,     NULL);
-
-	/* enable TouchScreen */
-	irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
-
-	tsc_device.irq = IRQ28;
-	i2c_register_board_info(1, &tsc_device, 1);
-
-	/* LCDC0 */
-	lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
-	lcdc_info.ch[0].interface_type		= RGB24;
-	lcdc_info.ch[0].clock_divider		= 1;
-	lcdc_info.ch[0].flags			= LCDC_FLAGS_DWPOL;
-	lcdc_info.ch[0].panel_cfg.width		= 44;
-	lcdc_info.ch[0].panel_cfg.height	= 79;
-
-	platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
-
-#else
-	/*
-	 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
-	 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
-	 */
-
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
-	gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
-	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
-	lcdc_info.clock_source			= LCDC_CLK_BUS;
-	lcdc_info.ch[0].interface_type		= RGB18;
-	lcdc_info.ch[0].clock_divider		= 3;
-	lcdc_info.ch[0].flags			= 0;
-	lcdc_info.ch[0].panel_cfg.width		= 152;
-	lcdc_info.ch[0].panel_cfg.height	= 91;
-
-	/* enable TouchScreen */
-	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
-	tsc_device.irq = IRQ7;
-	i2c_register_board_info(0, &tsc_device, 1);
-#endif /* CONFIG_AP4EVB_QHD */
-
-	/* CEU */
-
-	/*
-	 * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
-	 * becomes available
-	 */
-
-	/* MIPI-CSI stuff */
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-
-	clk = clk_get(NULL, "vck1_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 13000000));
-		clk_enable(clk);
-		clk_put(clk);
-	}
-
-	sh7372_add_standard_devices();
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
-	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-#define SRCR4 IOMEM(0xe61580bc)
-	srcr4 = __raw_readl(SRCR4);
-	__raw_writel(srcr4 | (1 << 13), SRCR4);
-	udelay(50);
-	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
-	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
-
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-
-	hdmi_init_pm_clock();
-	sh7372_pm_init();
-	pm_clk_add(&fsi_device.dev, "spu2");
-	pm_clk_add(&lcdc1_device.dev, "hdmi");
-}
-
-MACHINE_START(AP4EVB, "ap4evb")
-	.map_io		= sh7372_map_io,
-	.init_early	= sh7372_add_early_devices,
-	.init_irq	= sh7372_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= ap4evb_init,
-	.init_late	= sh7372_pm_init_late,
-	.init_time	= sh7372_earlytimer_init,
-MACHINE_END