summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/setup-r8a7790.c
diff options
context:
space:
mode:
authorMagnus Damm <damm@opensource.se>2013-09-12 00:32:49 (GMT)
committerSimon Horman <horms+renesas@verge.net.au>2013-10-08 00:52:25 (GMT)
commit50c517d92eac08b352ccf4b25c93a53947bb855e (patch)
tree910deb67009ee8c630bd9d73c6c6f960a1298638 /arch/arm/mach-shmobile/setup-r8a7790.c
parentb9b28f5254d792d7ebe35f5314fe11a36174270d (diff)
downloadlinux-50c517d92eac08b352ccf4b25c93a53947bb855e.tar.xz
ARM: shmobile: Break out R-Car Gen2 setup code
Move arch timer workaround code and boot mode pin handling from setup-r8a7790.c to setup-rcar-gen2.c. With this in place the same code can be used on other R-Car Generation 2 devices such as r8a7791. Signed-off-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au trivial rebase of board-lager.c for introduction of lager_add_standard_devices()] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Diffstat (limited to 'arch/arm/mach-shmobile/setup-r8a7790.c')
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7790.c68
1 files changed, 1 insertions, 67 deletions
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index c7e24ef..c47bcebb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -18,7 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clocksource.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
@@ -203,71 +202,6 @@ void __init r8a7790_add_standard_devices(void)
r8a7790_register_thermal();
}
-#define MODEMR 0xe6160060
-
-u32 __init r8a7790_read_mode_pins(void)
-{
- void __iomem *modemr = ioremap_nocache(MODEMR, 4);
- u32 mode;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
- return mode;
-}
-
-#define CNTCR 0
-#define CNTFID0 0x20
-
-void __init r8a7790_timer_init(void)
-{
-#ifdef CONFIG_ARM_ARCH_TIMER
- u32 mode = r8a7790_read_mode_pins();
- void __iomem *base;
- int extal_mhz = 0;
- u32 freq;
-
- /* At Linux boot time the r8a7790 arch timer comes up
- * with the counter disabled. Moreover, it may also report
- * a potentially incorrect fixed 13 MHz frequency. To be
- * correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
- */
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
- }
-
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
-
- /* Remap "armgcnt address map" space */
- base = ioremap(0xe6080000, PAGE_SIZE);
-
- /* Update registers with correct frequency */
- iowrite32(freq, base + CNTFID0);
- asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
-
- /* make sure arch timer is started by setting bit 0 of CNTCR */
- iowrite32(1, base + CNTCR);
- iounmap(base);
-#endif /* CONFIG_ARM_ARCH_TIMER */
-
- clocksource_of_init();
-}
-
void __init r8a7790_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
@@ -285,7 +219,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
- .init_time = r8a7790_timer_init,
+ .init_time = rcar_gen2_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */