Merge branch 'omap-for-v3.8/fixes-for-merge-window' into omap-for-v3.8/fixes-for-merge-window-v2

4 files changed, 0 insertions, 146 deletions

diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 8d88584..9d9aa2f 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -11,7 +11,6 @@ obj-  :=
 # omap_device support (OMAP2+ only at the moment)
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
-obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
 i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
 obj-y += $(i2c-omap-m) $(i2c-omap-y)
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
deleted file mode 100644
index a609e21..0000000
--- a/arch/arm/plat-omap/debug-devices.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/debug-devices.c
- *
- * Copyright (C) 2005 Nokia Corporation
- * Modified from mach-omap2/board-h4.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include <plat/debug-devices.h>
-
-/* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2.
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource led_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device led_device = {
-	.name		= "omap_dbg_led",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(led_resources),
-	.resource	= led_resources,
-};
-
-static struct platform_device *debug_devices[] __initdata = {
-	&smc91x_device,
-	&led_device,
-	/* ps2 kbd + mouse ports */
-	/* 4 extra uarts */
-	/* 6 input dip switches */
-	/* 8 output pins */
-};
-
-int __init debug_card_init(u32 addr, unsigned gpio)
-{
-	int	status;
-
-	smc91x_resources[0].start = addr + 0x300;
-	smc91x_resources[0].end   = addr + 0x30f;
-
-	smc91x_resources[1].start = gpio_to_irq(gpio);
-	smc91x_resources[1].end   = gpio_to_irq(gpio);
-
-	status = gpio_request(gpio, "SMC91x irq");
-	if (status < 0) {
-		printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
-		return status;
-	}
-	gpio_direction_input(gpio);
-
-	led_resources[0].start = addr;
-	led_resources[0].end   = addr + SZ_4K - 1;
-
-	return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
-}
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
deleted file mode 100644
index 8fc4287..0000000
--- a/arch/arm/plat-omap/include/plat/debug-devices.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
deleted file mode 100644
index ff9b0aa..0000000
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Driver for OMAP-UART controller.
- * Based on drivers/serial/8250.c
- *
- * Copyright (C) 2010 Texas Instruments.
- *
- * Authors:
- *	Govindraj R	<govindraj.raja@ti.com>
- *	Thara Gopinath	<thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __OMAP_SERIAL_H__
-#define __OMAP_SERIAL_H__
-
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/pm_qos.h>
-
-#define DRIVER_NAME	"omap_uart"
-
-/*
- * Use tty device name as ttyO, [O -> OMAP]
- * in bootargs we specify as console=ttyO0 if uart1
- * is used as console uart.
- */
-#define OMAP_SERIAL_NAME	"ttyO"
-
-struct omap_uart_port_info {
-	bool			dma_enabled;	/* To specify DMA Mode */
-	unsigned int		uartclk;	/* UART clock rate */
-	upf_t			flags;		/* UPF_* flags */
-	unsigned int		dma_rx_buf_size;
-	unsigned int		dma_rx_timeout;
-	unsigned int		autosuspend_timeout;
-	unsigned int		dma_rx_poll_rate;
-	int			DTR_gpio;
-	int			DTR_inverted;
-	int			DTR_present;
-
-	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct device *);
-	void (*set_noidle)(struct device *);
-	void (*enable_wakeup)(struct device *, bool);
-};
-
-#endif /* __OMAP_SERIAL_H__ */