ARM: SAMSUNG: Remove remaining legacy code

After refactoring suspend/resume, which was last part with dependencies
on legacy code, all Kconfig symbols related to Samsung ATAGS support can
be deselected and more unused code removed. This includes most of s5p-*
code as well, as s5pv210 was their last user.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

25 files changed, 13 insertions, 1720 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index f8185b5..1091b0a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,29 +6,16 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210
 	default y
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
 	help
 	  Base platform code for all Samsung SoC based systems
 
-config PLAT_S5P
-	bool
-	depends on ARCH_S5PV210
-	default y
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_VIC
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select S3C_GPIO_TRACK
-	select S5P_GPIO_DRVSTR
-	help
-	  Base platform code for Samsung's S5P series SoC.
-
 config SAMSUNG_PM
 	bool
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || S5P_PM)
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
 	default y
 	help
 	  Base platform power management code for samsung code
@@ -64,31 +51,6 @@ config SAMSUNG_ATAGS
 
 if SAMSUNG_ATAGS
 
-# options for IRQ support
-
-config S5P_IRQ
-	def_bool ARCH_S5PV210
-	help
-	  Support common interrupt part for ARCH_S5P SoCs
-
-config S5P_EXT_INT
-	bool
-	help
-	  Use the external interrupts (other than GPIO interrupts.)
-
-config S5P_GPIO_INT
-	bool
-	help
-	  Common code for the GPIO interrupts (other than external interrupts.)
-
-# options for gpio configuration support
-
-config S5P_GPIO_DRVSTR
-	bool
-	help
-	  Internal configuration to get and set correct GPIO driver strength
-	  helper
-
 config SAMSUNG_GPIO_EXTRA
 	int "Number of additional GPIO pins"
 	default 128 if SAMSUNG_GPIO_EXTRA128
@@ -120,12 +82,6 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
-# uart options
-
-config S5P_DEV_UART
-	def_bool y
-	depends on ARCH_S5PV210
-
 # ADC driver
 
 config S3C_ADC
@@ -283,66 +239,6 @@ config SAMSUNG_DEV_BACKLIGHT
 	help
 	  Compile in platform device definition LCD backlight with PWM Timer
 
-config S5P_DEV_CSIS0
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_FIMC0
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_FIMD0
-	bool
-	help
-	  Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_G2D
-	bool
-	help
-	  Compile in platform device definitions for G2D device
-
-config S5P_DEV_I2C_HDMIPHY
-	bool
-	help
-	  Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_JPEG
-	bool
-	help
-	  Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_TV
-	bool
-	help
-	  Compile in platform device definition for TV interface
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select PWM
@@ -363,12 +259,6 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
-config S5P_IRQ_PM
-	bool
-	default y if S5P_PM
-	help
-	  Legacy IRQ power management for S5P platforms
-
 config SAMSUNG_PM_GPIO
 	bool
 	default y if GPIO_SAMSUNG && PM
@@ -451,17 +341,6 @@ config SAMSUNG_WDT_RESET
 	  Compile support for system restart by triggering watchdog reset.
 	  Used on SoCs that do not provide dedicated reset control.
 
-config S5P_PM
-	bool
-	help
-	  Common code for power management support on S5P and newer SoCs
-
-config S5P_SLEEP
-	bool
-	help
-	  Internal config node to apply common S5P sleep management code.
-	  Can be selected by S5P and newer SoCs with similar sleep procedure.
-
 config DEBUG_S3C_UART
 	depends on PLAT_SAMSUNG
 	int
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 97fc15e..5fe1750 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -15,10 +15,6 @@ obj-				:=
 
 obj-y				+= init.o cpu.o
 
-obj-$(CONFIG_S5P_IRQ)		+= s5p-irq.o
-obj-$(CONFIG_S5P_EXT_INT)	+= s5p-irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT)	+= s5p-irq-gpioint.o
-
 # ADC
 
 obj-$(CONFIG_S3C_ADC)	+= adc.o
@@ -30,7 +26,6 @@ obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
 obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
-obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
@@ -52,7 +47,3 @@ obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= pm-debug.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o
-
-obj-$(CONFIG_S5P_PM)		+= s5p-pm.o
-obj-$(CONFIG_S5P_IRQ_PM)	+= s5p-irq-pm.o
-obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 945fc3f..360618e 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-
 #include <plat/map-base.h>
 #include <plat/cpu.h>
 
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index ead4f1c..83c7d15 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -53,7 +53,6 @@
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
-#include <plat/hdmi.h>
 #include <linux/platform_data/hwmon-s3c.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
@@ -145,23 +144,6 @@ struct platform_device s3c_device_camif = {
 };
 #endif /* CONFIG_CPU_S3C2440 */
 
-/* ASOC DMA */
-
-#ifdef CONFIG_PLAT_S5P 
-static struct resource samsung_asoc_idma_resource = DEFINE_RES_IRQ(IRQ_I2S0);
-
-struct platform_device samsung_asoc_idma = {
-	.name		= "samsung-idma",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &samsung_asoc_idma_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif
-
 /* FB */
 
 #ifdef CONFIG_S3C_DEV_FB
@@ -190,151 +172,6 @@ void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
 }
 #endif /* CONFIG_S3C_DEV_FB */
 
-/* FIMC */
-
-#ifdef CONFIG_S5P_DEV_FIMC0
-static struct resource s5p_fimc0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC0),
-};
-
-struct platform_device s5p_device_fimc0 = {
-	.name		= "s5p-fimc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
-	.resource	= s5p_fimc0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_fimc_md = {
-	.name	= "s5p-fimc-md",
-	.id	= -1,
-};
-#endif /* CONFIG_S5P_DEV_FIMC0 */
-
-#ifdef CONFIG_S5P_DEV_FIMC1
-static struct resource s5p_fimc1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC1),
-};
-
-struct platform_device s5p_device_fimc1 = {
-	.name		= "s5p-fimc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
-	.resource	= s5p_fimc1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC1 */
-
-#ifdef CONFIG_S5P_DEV_FIMC2
-static struct resource s5p_fimc2_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC2),
-};
-
-struct platform_device s5p_device_fimc2 = {
-	.name		= "s5p-fimc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
-	.resource	= s5p_fimc2_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC2 */
-
-#ifdef CONFIG_S5P_DEV_FIMC3
-static struct resource s5p_fimc3_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC3),
-};
-
-struct platform_device s5p_device_fimc3 = {
-	.name		= "s5p-fimc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s5p_fimc3_resource),
-	.resource	= s5p_fimc3_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC3 */
-
-/* G2D */
-
-#ifdef CONFIG_S5P_DEV_G2D
-static struct resource s5p_g2d_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_G2D, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_2D),
-};
-
-struct platform_device s5p_device_g2d = {
-	.name		= "s5p-g2d",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_g2d_resource),
-	.resource	= s5p_g2d_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_G2D */
-
-#ifdef CONFIG_S5P_DEV_JPEG
-static struct resource s5p_jpeg_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_JPEG),
-};
-
-struct platform_device s5p_device_jpeg = {
-	.name		= "s5p-jpeg",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_jpeg_resource),
-	.resource	= s5p_jpeg_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /*  CONFIG_S5P_DEV_JPEG */
-
-/* FIMD0 */
-
-#ifdef CONFIG_S5P_DEV_FIMD0
-static struct resource s5p_fimd0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
-	[1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"),
-	[2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"),
-	[3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"),
-};
-
-struct platform_device s5p_device_fimd0 = {
-	.name		= "s5p-fb",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimd0_resource),
-	.resource	= s5p_fimd0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			 &s5p_device_fimd0);
-}
-#endif /* CONFIG_S5P_DEV_FIMD0 */
-
 /* HWMON */
 
 #ifdef CONFIG_S3C_DEV_HWMON
@@ -722,60 +559,6 @@ void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
 }
 #endif /* CONFIG_S3C_DEV_I2C7 */
 
-/* I2C HDMIPHY */
-
-#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY
-static struct resource s5p_i2c_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY),
-};
-
-struct platform_device s5p_device_i2c_hdmiphy = {
-	.name		= "s3c2440-hdmiphy-i2c",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_i2c_resource),
-	.resource	= s5p_i2c_resource,
-};
-
-void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-
-		if (soc_is_s5pv210())
-			pd->bus_num = 3;
-		else
-			pd->bus_num = 0;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s5p_device_i2c_hdmiphy);
-}
-
-static struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
-
-void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
-				  struct i2c_board_info *mhl_info, int mhl_bus)
-{
-	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
-
-	if (soc_is_s5pv210())
-		pd->hdmiphy_bus = 3;
-	else
-		pd->hdmiphy_bus = 0;
-
-	pd->hdmiphy_info = hdmiphy_info;
-	pd->mhl_info = mhl_info;
-	pd->mhl_bus = mhl_bus;
-
-	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
-			 &s5p_device_hdmi);
-}
-
-#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
-
 /* I2S */
 
 #ifdef CONFIG_PLAT_S3C24XX
@@ -879,36 +662,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 }
 #endif /* CONFIG_PLAT_S3C24XX */
 
-/* MIPI CSIS */
-
-#ifdef CONFIG_S5P_DEV_CSIS0
-static struct resource s5p_mipi_csis0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
-};
-
-struct platform_device s5p_device_mipi_csis0 = {
-	.name		= "s5p-mipi-csis",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_mipi_csis0_resource),
-	.resource	= s5p_mipi_csis0_resource,
-};
-#endif /* CONFIG_S5P_DEV_CSIS0 */
-
-#ifdef CONFIG_S5P_DEV_CSIS1
-static struct resource s5p_mipi_csis1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
-};
-
-struct platform_device s5p_device_mipi_csis1 = {
-	.name		= "s5p-mipi-csis",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_mipi_csis1_resource),
-	.resource	= s5p_mipi_csis1_resource,
-};
-#endif
-
 /* NAND */
 
 #ifdef CONFIG_S3C_DEV_NAND
@@ -1052,43 +805,6 @@ void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
 }
 #endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
 
-#ifdef CONFIG_S5P_DEV_ONENAND
-static struct resource s5p_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K),
-	[1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI),
-};
-
-struct platform_device s5p_device_onenand = {
-	.name		= "s5pc110-onenand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
-	.resource	= s5p_onenand_resources,
-};
-#endif /* CONFIG_S5P_DEV_ONENAND */
-
-/* PMU */
-
-#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS)
-static struct resource s5p_pmu_resource[] = {
-	DEFINE_RES_IRQ(IRQ_PMU)
-};
-
-static struct platform_device s5p_device_pmu = {
-	.name		= "arm-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_pmu_resource),
-	.resource	= s5p_pmu_resource,
-};
-
-static int __init s5p_pmu_init(void)
-{
-	platform_device_register(&s5p_device_pmu);
-	return 0;
-}
-arch_initcall(s5p_pmu_init);
-#endif /* CONFIG_PLAT_S5P */
-
 /* PWM Timer */
 
 #ifdef CONFIG_SAMSUNG_DEV_PWM
@@ -1251,52 +967,6 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
 }
 #endif /* CONFIG_SAMSUNG_DEV_TS */
 
-/* TV */
-
-#ifdef CONFIG_S5P_DEV_TV
-
-static struct resource s5p_hdmi_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M),
-	[1] = DEFINE_RES_IRQ(IRQ_HDMI),
-};
-
-struct platform_device s5p_device_hdmi = {
-	.name		= "s5p-hdmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
-	.resource	= s5p_hdmi_resources,
-};
-
-static struct resource s5p_sdo_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_SDO),
-};
-
-struct platform_device s5p_device_sdo = {
-	.name		= "s5p-sdo",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
-	.resource	= s5p_sdo_resources,
-};
-
-static struct resource s5p_mixer_resources[] = {
-	[0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"),
-	[1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"),
-	[2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"),
-};
-
-struct platform_device s5p_device_mixer = {
-	.name		= "s5p-mixer",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
-	.resource	= s5p_mixer_resources,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_S5P_DEV_TV */
-
 /* USB */
 
 #ifdef CONFIG_S3C_DEV_USB_HOST
diff --git a/arch/arm/plat-samsung/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h
deleted file mode 100644
index a5708bf..0000000
--- a/arch/arm/plat-samsung/include/plat/camport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_CAMPORT_H_
-#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
-	S5P_CAMPORT_A,
-	S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 995e56e..61d14f3 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -47,7 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -76,12 +75,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 # define soc_is_s3c64xx()	0
 #endif
 
-#if defined(CONFIG_CPU_S5PV210)
-# define soc_is_s5pv210()	is_samsung_s5pv210()
-#else
-# define soc_is_s5pv210()	0
-#endif
-
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ
@@ -117,12 +110,9 @@ extern void s3c_init_cpu(unsigned long idcode,
 
 /* core initialisation functions */
 
-extern void s5p_init_irq(u32 *vic, u32 num_vic);
-
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
 
 extern unsigned int samsung_rev(void);
 
@@ -150,6 +140,4 @@ extern struct bus_type s3c2442_subsys;
 extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 
-extern void (*s5pc1xx_idle)(void);
-
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 5f5a28d..e23fed3 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -25,9 +25,6 @@ struct s3c24xx_uart_resources {
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-extern struct s3c24xx_uart_resources s5p_uart_resources[];
-extern struct s3c24xx_uart_resources exynos4_uart_resources[];
-extern struct s3c24xx_uart_resources exynos5_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
@@ -75,45 +72,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 extern struct platform_device s3c_device_usb_hsudc;
 extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-extern struct platform_device s5p_device_fimc_md;
-extern struct platform_device s5p_device_jpeg;
-extern struct platform_device s5p_device_g2d;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s5p_device_hdmi;
-extern struct platform_device s5p_device_i2c_hdmiphy;
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-extern struct platform_device s5p_device_mixer;
-extern struct platform_device s5p_device_onenand;
-extern struct platform_device s5p_device_sdo;
-
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_spdif;
-
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_ohci;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_spdif;
-
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
 extern struct platform_device samsung_device_pwm;
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h
index 6abcbf1..bca383e 100644
--- a/arch/arm/plat-samsung/include/plat/fb-core.h
+++ b/arch/arm/plat-samsung/include/plat/fb-core.h
@@ -26,19 +26,4 @@ static inline void s3c_fb_setname(char *name)
 #endif
 }
 
-/* Re-define device name depending on support. */
-static inline void s5p_fb_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMD0
-	case 0:
-		s5p_device_fimd0.name = name;
-	break;
-#endif
-	default:
-		printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
-	break;
-	}
-}
-
 #endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 5a0e26a..b89f8f2 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -26,32 +26,10 @@
 extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
 
 /**
- * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
  * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
  *
  * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
-/**
- * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pv210_fb_gpio_setup_24bpp(void);
-
-/**
- * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
- */
-extern void exynos4_fimd0_gpio_setup_24bpp(void);
-
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
deleted file mode 100644
index 1d6cb2b..0000000
--- a/arch/arm/plat-samsung/include/plat/fimc-core.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fimc-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * Samsung camera interface driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_FIMC_CORE_H
-#define __ASM_PLAT_FIMC_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s3c_fimc_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMC0
-	case 0:
-		s5p_device_fimc0.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
-	case 1:
-		s5p_device_fimc1.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
-	case 2:
-		s5p_device_fimc2.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
-	case 3:
-		s5p_device_fimc3.name = name;
-		break;
-#endif
-	default:
-		break;
-	}
-}
-
-#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 08740ee..b5294ef 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -27,7 +27,6 @@
 #include <linux/types.h>
 
 typedef unsigned int __bitwise__ samsung_gpio_pull_t;
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
 struct samsung_gpio_chip;
@@ -180,67 +179,4 @@ static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
 	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
 }
 
-/* Define values for the drvstr available for each gpio pin.
- *
- * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5P series.
- */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
-
-/**
- * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the driver streght value for the specified pin.
-*/
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
-
-/**
- * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
- * @pin: The pin number to configure the driver streght value
- * @drvstr: The new value of the driver strength
- *
- * This function sets the driver strength value for the specified pin.
- * It will return 0 if successful, or a negative error code if the pin
- * cannot support the requested setting.
-*/
-extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
-
-/**
- * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
- * @pin: The pin number from the group to be registered
- *
- * This function registers gpio interrupt support for the group that the
- * specified pin belongs to.
- *
- * The total number of gpio pins is quite large ob s5p series. Registering
- * irq support for all of them would be a resource waste. Because of that the
- * interrupt support for standard gpio pins is registered dynamically.
- *
- * It will return the irq number of the interrupt that has been registered
- * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
- * to call this function more than once for the same gpio group (the group
- * will be registered only once).
- */
-extern int s5p_register_gpio_interrupt(int pin);
-
-/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt
- * registration (see s5p_register_gpio_interrupt function)
- * @chain_irq: chained irq number for the gpio int handler for this bank
- * @start: start gpio group number of this bank
- * @nr_groups: number of gpio groups handled by this bank
- *
- * This functions registers initial information about gpio banks that
- * can be later used by the s5p_register_gpio_interrupt() function to
- * enable support for gpio interrupt for particular gpio group.
- */
-#ifdef CONFIG_S5P_GPIO_INT
-extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups);
-#else
-#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0)
-#endif
-
 #endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
deleted file mode 100644
index 331d046..0000000
--- a/arch/arm/plat-samsung/include/plat/hdmi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_HDMI_H
-#define __PLAT_SAMSUNG_HDMI_H __FILE__
-
-extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
-				  struct i2c_board_info *mhl_info, int mhl_bus);
-
-#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
deleted file mode 100644
index 039001c..0000000
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_IRQS_H
-#define __PLAT_SAMSUNG_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET		(32)
-
-#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE		S5P_IRQ(0)
-#define S5P_VIC1_BASE		S5P_IRQ(32)
-#define S5P_VIC2_BASE		S5P_IRQ(64)
-#define S5P_VIC3_BASE		S5P_IRQ(96)
-
-#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE		S5P_VIC0_BASE
-#define IRQ_VIC1_BASE		S5P_VIC1_BASE
-#define IRQ_VIC2_BASE		S5P_VIC2_BASE
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
-
-#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
-					: ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
-						((irq) - S5P_EINT_BASE1) : \
-						((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
-   To avoid memory waste irq descriptors are allocated only for
-   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
-   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
-   to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE	8
-#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
-
-#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
deleted file mode 100644
index 033654e..0000000
--- a/arch/arm/plat-samsung/include/plat/mfc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_MFC_H
-#define __PLAT_SAMSUNG_MFC_H __FILE__
-
-struct s5p_mfc_dt_meminfo {
-	unsigned long	loff;
-	unsigned long	lsize;
-	unsigned long	roff;
-	unsigned long	rsize;
-	char		*compatible;
-};
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase:	base address for MFC 'right' memory interface
- * @rsize:	size of the memory reserved for MFC 'right' interface
- * @lbase:	base address for MFC 'left' memory interface
- * @lsize:	size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index f84b6cb..2787553 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,14 +57,6 @@ extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
 /* S3C2416 SDHCI setup */
 
@@ -144,45 +136,6 @@ static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
-/* S5PV210 SDHCI setup */
-
-#ifdef CONFIG_S5PV210_SETUP_SDHCI
-static inline void s5pv210_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-static inline void s5pv210_default_sdhci1(void) { }
-static inline void s5pv210_default_sdhci2(void) { }
-static inline void s5pv210_default_sdhci3(void) { }
-
-#endif /* CONFIG_S5PV210_SETUP_SDHCI */
-
 static inline void s3c_sdhci_setname(int id, char *name)
 {
 	switch (id) {
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
deleted file mode 100644
index 3bc34f3c..0000000
--- a/arch/arm/plat-samsung/include/plat/tv-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/tv.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *	Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * Samsung TV driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_PLAT_TV_H
-#define __SAMSUNG_PLAT_TV_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s5p_hdmi_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_hdmi.name = name;
-#endif
-}
-
-static inline void s5p_mixer_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_mixer.name = name;
-#endif
-}
-
-static inline void s5p_sdo_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_sdo.name = name;
-#endif
-}
-
-#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index da26881..f6084f6 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -196,7 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = {
 	.resume = samsung_gpio_pm_2bit_resume,
 };
 
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
+#if defined(CONFIG_ARCH_S3C64XX)
 static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -306,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = {
 	.save	= samsung_gpio_pm_4bit_save,
 	.resume = samsung_gpio_pm_4bit_resume,
 };
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
+#endif /* CONFIG_ARCH_S3C64XX */
 
 /**
  * samsung_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index 469b862..0b04b6b 100644
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -17,56 +17,16 @@
 #include <linux/of_fdt.h>
 #include <linux/of.h>
 
-#include <plat/mfc.h>
-
-#ifdef CONFIG_SAMSUNG_ATAGS
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <plat/devs.h>
-
-static struct resource s5p_mfc_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_MFC),
-};
-
-struct platform_device s5p_device_mfc = {
-	.name		= "s5p-mfc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
-	.resource	= s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-struct platform_device s5p_device_mfc_l = {
-	.name		= "s5p-mfc-l",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &s5p_device_mfc_l.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_mfc_r = {
-	.name		= "s5p-mfc-r",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &s5p_device_mfc_r.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#else
 static struct platform_device s5p_device_mfc_l;
 static struct platform_device s5p_device_mfc_r;
-#endif
+
+struct s5p_mfc_dt_meminfo {
+	unsigned long	loff;
+	unsigned long	lsize;
+	unsigned long	roff;
+	unsigned long	rsize;
+	char		*compatible;
+};
 
 struct s5p_mfc_reserved_mem {
 	phys_addr_t	base;
@@ -77,7 +37,7 @@ struct s5p_mfc_reserved_mem {
 static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
 
 
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 				phys_addr_t lbase, unsigned int lsize)
 {
 	int i;
@@ -100,28 +60,6 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 	}
 }
 
-#ifdef CONFIG_SAMSUNG_ATAGS
-static int __init s5p_mfc_memory_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (!area->base)
-			continue;
-
-		if (dma_declare_coherent_memory(area->dev, area->base,
-				area->base, area->size,
-				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
-			printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-	}
-	return 0;
-}
-device_initcall(s5p_mfc_memory_init);
-#endif
-
-#ifdef CONFIG_OF
 int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
 				int depth, void *data)
 {
@@ -154,4 +92,3 @@ int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
 
 	return 1;
 }
-#endif
diff --git a/arch/arm/plat-samsung/s5p-dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c
deleted file mode 100644
index 8c4487a..0000000
--- a/arch/arm/plat-samsung/s5p-dev-uart.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Base S5P UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
- /* Serial port registrations */
-
-static struct resource s5p_uart0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
-	[1] = DEFINE_RES_IRQ(IRQ_UART0),
-};
-
-static struct resource s5p_uart1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
-	[1] = DEFINE_RES_IRQ(IRQ_UART1),
-};
-
-static struct resource s5p_uart2_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
-	[1] = DEFINE_RES_IRQ(IRQ_UART2),
-};
-
-static struct resource s5p_uart3_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
-	[1] = DEFINE_RES_IRQ(IRQ_UART3),
-#endif
-};
-
-static struct resource s5p_uart4_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
-	[0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
-	[1] = DEFINE_RES_IRQ(IRQ_UART4),
-#endif
-};
-
-static struct resource s5p_uart5_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
-	[0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
-	[1] = DEFINE_RES_IRQ(IRQ_UART5),
-#endif
-};
-
-struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s5p_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
-	},
-	[1] = {
-		.resources	= s5p_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
-	},
-	[2] = {
-		.resources	= s5p_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
-	},
-	[3] = {
-		.resources	= s5p_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
-	},
-	[4] = {
-		.resources	= s5p_uart4_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
-	},
-	[5] = {
-		.resources	= s5p_uart5_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
-	},
-};
diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
deleted file mode 100644
index ebee4dc..0000000
--- a/arch/arm/plat-samsung/s5p-irq-eint.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/of.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-
-static inline void s5p_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static inline void s5p_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_maskack(struct irq_data *data)
-{
-	/* compiler should in-line these */
-	s5p_irq_eint_mask(data);
-	s5p_irq_eint_ack(data);
-}
-
-static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-
-	if ((0 <= offs) && (offs < 8))
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-
-	else if ((8 <= offs) && (offs < 16))
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-
-	else if ((16 <= offs) && (offs < 24))
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-
-	else if ((24 <= offs) && (offs < 32))
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-
-	else
-		printk(KERN_ERR "No such irq number %d", offs);
-
-	return 0;
-}
-
-static struct irq_chip s5p_irq_eint = {
-	.name		= "s5p-eint",
-	.irq_mask	= s5p_irq_eint_mask,
-	.irq_unmask	= s5p_irq_eint_unmask,
-	.irq_mask_ack	= s5p_irq_eint_maskack,
-	.irq_ack	= s5p_irq_eint_ack,
-	.irq_set_type	= s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/* s5p_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from EINTs 16 to 31. It is designed to be inlined into the specific
- * handler s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void s5p_irq_demux_eint(unsigned int start)
-{
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-	unsigned int irq;
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	s5p_irq_demux_eint(IRQ_EINT(16));
-	s5p_irq_demux_eint(IRQ_EINT(24));
-}
-
-static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(data);
-
-	s5p_irq_eint_mask(data);
-	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s5p_irq_vic_eint_unmask(struct irq_data *data)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(data);
-
-	s5p_irq_eint_unmask(data);
-	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
-}
-
-static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_vic_eint_maskack(struct irq_data *data)
-{
-	s5p_irq_vic_eint_mask(data);
-	s5p_irq_vic_eint_ack(data);
-}
-
-static struct irq_chip s5p_irq_vic_eint = {
-	.name		= "s5p_vic_eint",
-	.irq_mask	= s5p_irq_vic_eint_mask,
-	.irq_unmask	= s5p_irq_vic_eint_unmask,
-	.irq_mask_ack	= s5p_irq_vic_eint_maskack,
-	.irq_ack	= s5p_irq_vic_eint_ack,
-	.irq_set_type	= s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-static int __init s5p_init_irq_eint(void)
-{
-	int irq;
-
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
-		irq_set_chip(irq, &s5p_irq_vic_eint);
-
-	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
-		irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
-	return 0;
-}
-
-arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c
deleted file mode 100644
index fafdb05..0000000
--- a/arch/arm/plat-samsung/s5p-irq-gpioint.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-
-#define GPIO_BASE(chip)		((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
-
-#define CON_OFFSET		0x700
-#define MASK_OFFSET		0x900
-#define PEND_OFFSET		0xA00
-#define REG_OFFSET(x)		((x) << 2)
-
-struct s5p_gpioint_bank {
-	struct list_head	list;
-	int			start;
-	int			nr_groups;
-	int			irq;
-	struct samsung_gpio_chip	**chips;
-	void			(*handler)(unsigned int, struct irq_desc *);
-};
-
-static LIST_HEAD(banks);
-
-static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	struct irq_chip_type *ct = gc->chip_types;
-	unsigned int shift = (d->irq - gc->irq_base) << 2;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		type = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		type = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		type = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		type = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		type = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-	case IRQ_TYPE_NONE:
-	default:
-		printk(KERN_WARNING "No irq type\n");
-		return -EINVAL;
-	}
-
-	gc->type_cache &= ~(0x7 << shift);
-	gc->type_cache |= type << shift;
-	writel(gc->type_cache, gc->reg_base + ct->regs.type);
-	return 0;
-}
-
-static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
-	int group, pend_offset, mask_offset;
-	unsigned int pend, mask;
-
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-
-	for (group = 0; group < bank->nr_groups; group++) {
-		struct samsung_gpio_chip *chip = bank->chips[group];
-		if (!chip)
-			continue;
-
-		pend_offset = REG_OFFSET(group);
-		pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
-		if (!pend)
-			continue;
-
-		mask_offset = REG_OFFSET(group);
-		mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
-		pend &= ~mask;
-
-		while (pend) {
-			int offset = fls(pend) - 1;
-			int real_irq = chip->irq_base + offset;
-			generic_handle_irq(real_irq);
-			pend &= ~BIT(offset);
-		}
-	}
-	chained_irq_exit(chip, desc);
-}
-
-static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
-{
-	static int used_gpioint_groups = 0;
-	int group = chip->group;
-	struct s5p_gpioint_bank *b, *bank = NULL;
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
-		return -ENOMEM;
-
-	list_for_each_entry(b, &banks, list) {
-		if (group >= b->start && group < b->start + b->nr_groups) {
-			bank = b;
-			break;
-		}
-	}
-	if (!bank)
-		return -EINVAL;
-
-	if (!bank->handler) {
-		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
-				      bank->nr_groups, GFP_KERNEL);
-		if (!bank->chips)
-			return -ENOMEM;
-
-		irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
-		irq_set_handler_data(bank->irq, bank);
-		bank->handler = s5p_gpioint_handler;
-		printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
-		       bank->irq);
-	}
-
-	/*
-	 * chained GPIO irq has been successfully registered, allocate new gpio
-	 * int group and assign irq nubmers
-	 */
-	chip->irq_base = S5P_GPIOINT_BASE +
-			 used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
-	used_gpioint_groups++;
-
-	bank->chips[group - bank->start] = chip;
-
-	gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
-				    GPIO_BASE(chip),
-				    handle_level_irq);
-	if (!gc)
-		return -ENOMEM;
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_type = s5p_gpioint_set_type,
-	ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
-	ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
-	ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
-	irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
-			       IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	return 0;
-}
-
-int __init s5p_register_gpio_interrupt(int pin)
-{
-	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
-	int offset, group;
-	int ret;
-
-	if (!my_chip)
-		return -EINVAL;
-
-	offset = pin - my_chip->chip.base;
-	group = my_chip->group;
-
-	/* check if the group has been already registered */
-	if (my_chip->irq_base)
-		goto success;
-
-	/* register gpio group */
-	ret = s5p_gpioint_add(my_chip);
-	if (ret == 0) {
-		my_chip->chip.to_irq = samsung_gpiolib_to_irq;
-		printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
-		       group);
-		goto success;
-	}
-	return ret;
-success:
-	my_chip->bitmap_gpio_int |= BIT(offset);
-
-	return my_chip->irq_base + offset;
-}
-
-int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
-{
-	struct s5p_gpioint_bank *bank;
-
-	bank = kzalloc(sizeof(*bank), GFP_KERNEL);
-	if (!bank)
-		return -ENOMEM;
-
-	bank->start = start;
-	bank->nr_groups = nr_groups;
-	bank->irq = chain_irq;
-
-	list_add_tail(&bank->list, &banks);
-	return 0;
-}
diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
deleted file mode 100644
index 52b1694..0000000
--- a/arch/arm/plat-samsung/s5p-irq-pm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/plat-s3c24xx/irq-pm.c,
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <plat/cpu.h>
-#include <plat/irqs.h>
-#include <plat/pm.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
- * as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 0x00000006L;
-unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long irqbit;
-	unsigned int irq_rtc_tic, irq_rtc_alarm;
-
-	irq_rtc_tic = IRQ_RTC_TIC;
-	irq_rtc_alarm = IRQ_RTC_ALARM;
-
-	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
-		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
-
-		if (!state)
-			s3c_irqwake_intmask |= irqbit;
-		else
-			s3c_irqwake_intmask &= ~irqbit;
-	} else {
-		return -ENOENT;
-	}
-
-	return 0;
-}
-
-static struct sleep_save eint_save[] = {
-	SAVE_ITEM(S5P_EINT_CON(0)),
-	SAVE_ITEM(S5P_EINT_CON(1)),
-	SAVE_ITEM(S5P_EINT_CON(2)),
-	SAVE_ITEM(S5P_EINT_CON(3)),
-
-	SAVE_ITEM(S5P_EINT_FLTCON(0)),
-	SAVE_ITEM(S5P_EINT_FLTCON(1)),
-	SAVE_ITEM(S5P_EINT_FLTCON(2)),
-	SAVE_ITEM(S5P_EINT_FLTCON(3)),
-	SAVE_ITEM(S5P_EINT_FLTCON(4)),
-	SAVE_ITEM(S5P_EINT_FLTCON(5)),
-	SAVE_ITEM(S5P_EINT_FLTCON(6)),
-	SAVE_ITEM(S5P_EINT_FLTCON(7)),
-
-	SAVE_ITEM(S5P_EINT_MASK(0)),
-	SAVE_ITEM(S5P_EINT_MASK(1)),
-	SAVE_ITEM(S5P_EINT_MASK(2)),
-	SAVE_ITEM(S5P_EINT_MASK(3)),
-};
-
-int s3c24xx_irq_suspend(void)
-{
-	s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
-
-	return 0;
-}
-
-void s3c24xx_irq_resume(void)
-{
-	s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-}
-
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
deleted file mode 100644
index ddfaca9..0000000
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-
-void __init s5p_init_irq(u32 *vic, u32 num_vic)
-{
-#ifdef CONFIG_ARM_VIC
-	int irq;
-
-	/* initialize the VICs */
-	for (irq = 0; irq < num_vic; irq++)
-		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
-#endif
-}
diff --git a/arch/arm/plat-samsung/s5p-pm.c b/arch/arm/plat-samsung/s5p-pm.c
deleted file mode 100644
index 0747468..0000000
--- a/arch/arm/plat-samsung/s5p-pm.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P Power Manager (Suspend-To-RAM) support
- *
- * Based on arch/arm/plat-s3c24xx/pm.c
- * Copyright (c) 2004,2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <plat/pm.h>
-
-#define PFX "s5p pm: "
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
-	/* nothing here yet */
-}
-
-void s3c_pm_restore_core(void)
-{
-	/* nothing here yet */
-}
-
-void s3c_pm_save_core(void)
-{
-	/* nothing here yet */
-}
-
diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
deleted file mode 100644
index 25c68ceb..0000000
--- a/arch/arm/plat-samsung/s5p-sleep.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common S5P Sleep Code
- * Based on S3C64XX sleep code by:
- *	Ben Dooks, (c) 2008 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-
-	.data
-	.align
-
-	/*
-	 * sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	 */
-
-	.word	0x2bedf00d
-
-	/*
-	 * s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	 */
-
-ENTRY(s3c_cpu_resume)
-	b	cpu_resume
-ENDPROC(s3c_cpu_resume)