diff options
| author | yankejian <yankejian@huawei.com> | 2016-01-13 07:09:58 (GMT) |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-01-15 19:40:03 (GMT) |
| commit | b70ce2ab41cb67ab3d661eda078f7c4029bbca95 (patch) | |
| tree | ea468282ce796291065bd35245c07a5c100104ea /arch/arm64/boot/dts | |
| parent | 9207f9d45b0ad071baa128e846d7e7ed85016df3 (diff) | |
| download | linux-b70ce2ab41cb67ab3d661eda078f7c4029bbca95.tar.xz | |
dts: hisi: fixes no syscon fault when init mdio
When linux start up, we get the log below:
"Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl
mdio_bus mdio@803c0000: mdio sys ctl reg has not maped"
The source code about the subctrl is dealt syscon, but dts doesn't.
It cause such fault, so this patch adds the syscon info on dts files to
fixes it.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm64/boot/dts')
| -rw-r--r-- | arch/arm64/boot/dts/hisilicon/hip05.dtsi | 5 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 4 |
2 files changed, 7 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 4ff16d0..c1ea999 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -246,6 +246,11 @@ clock-frequency = <200000000>; }; + peri_c_subctrl: syscon@80000000 { + compatible = "hisilicon,hip05-perisubc", "syscon"; + reg = < 0x0 0x80000000 0x0 0x10000>; + }; + uart0: uart@80300000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x80300000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi index 606dd5a..da7b6e6 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi @@ -10,8 +10,8 @@ soc0: soc@000000000 { #address-cells = <1>; #size-cells = <0>; compatible = "hisilicon,hns-mdio"; - reg = <0x0 0x803c0000 0x0 0x10000 - 0x0 0x80000000 0x0 0x10000>; + reg = <0x0 0x803c0000 0x0 0x10000>; + subctrl-vbase = <&peri_c_subctrl>; soc0_phy0: ethernet-phy@0 { reg = <0x0>; |