Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core

60 files changed, 615 insertions, 274 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9295110..553b7cf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1576,95 +1576,6 @@ config AUTO_ZRELADDR
 	  0xf8000000. This assumes the zImage being placed in the first 128MB
 	  from start of memory.
 
-config ZRELADDR
-	hex "Physical address of the decompressed kernel image"
-	depends on !AUTO_ZRELADDR
-	default 0x00008000 if ARCH_BCMRING ||\
-		ARCH_CNS3XXX ||\
-		ARCH_DOVE ||\
-		ARCH_EBSA110 ||\
-		ARCH_FOOTBRIDGE ||\
-		ARCH_INTEGRATOR ||\
-		ARCH_IOP13XX ||\
-		ARCH_IOP33X ||\
-		ARCH_IXP2000 ||\
-		ARCH_IXP23XX ||\
-		ARCH_IXP4XX ||\
-		ARCH_KIRKWOOD ||\
-		ARCH_KS8695 ||\
-		ARCH_LOKI ||\
-		ARCH_MMP ||\
-		ARCH_MV78XX0 ||\
-		ARCH_NOMADIK ||\
-		ARCH_NUC93X ||\
-		ARCH_NS9XXX ||\
-		ARCH_ORION5X ||\
-		ARCH_SPEAR3XX ||\
-		ARCH_SPEAR6XX ||\
-		ARCH_U8500 ||\
-		ARCH_VERSATILE ||\
-		ARCH_W90X900
-	default 0x08008000 if ARCH_MX1 ||\
-		ARCH_SHARK
-	default 0x10008000 if ARCH_MSM ||\
-		ARCH_OMAP1 ||\
-		ARCH_RPC
-	default 0x20008000 if ARCH_S5P6440 ||\
-		ARCH_S5P6442 ||\
-		ARCH_S5PC100 ||\
-		ARCH_S5PV210
-	default 0x30008000 if ARCH_S3C2410 ||\
-		ARCH_S3C2400 ||\
-		ARCH_S3C2412 ||\
-		ARCH_S3C2416 ||\
-		ARCH_S3C2440 ||\
-		ARCH_S3C2443
-	default 0x40008000 if ARCH_STMP378X ||\
-		ARCH_STMP37XX ||\
-		ARCH_SH7372 ||\
-		ARCH_SH7377
-	default 0x50008000 if ARCH_S3C64XX ||\
-		ARCH_SH7367
-	default 0x60008000 if ARCH_VEXPRESS
-	default 0x80008000 if ARCH_MX25 ||\
-		ARCH_MX3 ||\
-		ARCH_NETX ||\
-		ARCH_OMAP2PLUS ||\
-		ARCH_PNX4008
-	default 0x90008000 if ARCH_MX5 ||\
-		ARCH_MX91231
-	default 0xa0008000 if ARCH_IOP32X ||\
-		ARCH_PXA ||\
-		MACH_MX27
-	default 0xc0008000 if ARCH_LH7A40X ||\
-		MACH_MX21
-	default 0xf0008000 if ARCH_AAEC2000 ||\
-		ARCH_L7200
-	default 0xc0028000 if ARCH_CLPS711X
-	default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-	default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-	default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
-	default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
-	default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
-	default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
-	default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
-	default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
-	default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
-	default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
-	default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
-	default 0xc0208000 if ARCH_SA1100 && SA1111
-	default 0xc0008000 if ARCH_SA1100 && !SA1111
-	default 0x30108000 if ARCH_S3C2410 && PM_H1940
-	default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
-	default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
-	help
-	  ZRELADDR is the physical address where the decompressed kernel
-	  image will be placed. ZRELADDR has to be specified when the
-	  assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
-	  selected.
-
 endmenu
 
 menu "CPU Power Management"
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index f705213..4a590f4 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -14,16 +14,18 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
--include $(srctree)/$(MACHINE)/Makefile.boot
+include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
+ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export INITRD_PHYS PARAMS_PHYS
+export ZRELADDR INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
+$(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 68775e3..b23f6bc 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -79,6 +79,10 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6af9907..6825c34 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -177,7 +177,7 @@ not_angel:
 		and	r4, pc, #0xf8000000
 		add	r4, r4, #TEXT_OFFSET
 #else
-		ldr	r4, =CONFIG_ZRELADDR
+		ldr	r4, =zreladdr
 #endif
 		subs	r0, r0, r1		@ calculate the delta offset
 
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 6c09135..7974baa 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -263,6 +263,14 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
 	return 0;
 }
 
+int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
+		__func__, dma_addr, size);
+	return (dev->bus == &pci_bus_type) &&
+		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 63e0c2d..14c1e18 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -13,6 +13,9 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP4=y
+# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index c226fe1..c568da7 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *);
  * DMA access and 1 if the buffer needs to be bounced.
  *
  */
-#ifdef CONFIG_SA1111
 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#else
-static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
-				   size_t size)
-{
-	return 0;
-}
-#endif
 
 /*
  * The DMA API, implemented by dmabounce.c.  See below for descriptions.
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 48837e6..b5799a3 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@
  * counter interrupts are regular interrupts and not an NMI. This
  * means that when we receive the interrupt we can call
  * perf_event_do_pending() that handles all of the work with
- * interrupts enabled.
+ * interrupts disabled.
  */
 static inline void
 set_perf_event_pending(void)
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index d02cfb6..c891eb7 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -393,6 +393,9 @@
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
 #define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 #define __NR_accept4			(__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index afeb71f..5c26ecc 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -376,6 +376,9 @@
 		CALL(sys_perf_event_open)
 /* 365 */	CALL(sys_recvmmsg)
 		CALL(sys_accept4)
+		CALL(sys_fanotify_init)
+		CALL(sys_fanotify_mark)
+		CALL(sys_prlimit64)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 56418f9..33c7077 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -230,7 +230,7 @@ static void etm_dump(void)
 	etb_lock(t);
 }
 
-static void sysrq_etm_dump(int key, struct tty_struct *tty)
+static void sysrq_etm_dump(int key)
 {
 	dev_dbg(tracer.dev, "Dumping ETB buffer\n");
 	etm_dump();
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 45d6a35..ad19c27 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -342,8 +342,8 @@ validate_event(struct cpu_hw_events *cpuc,
 {
 	struct hw_perf_event fake_event = event->hw;
 
-	if (event->pmu && event->pmu != &pmu)
-		return 0;
+	if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+		return 1;
 
 	return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
 }
@@ -1082,8 +1082,8 @@ armv6pmu_handle_irq(int irq_num,
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
 	perf_event_do_pending();
@@ -2058,8 +2058,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
 	perf_event_do_pending();
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 753c0d3..c67b47f 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -121,8 +121,8 @@ static struct clk ssc1_clk = {
 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
 	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -192,6 +192,14 @@ static struct clk ohci_clk = {
 	.parent		= &uhphs_clk,
 };
 
+/* One additional fake clock for second TC block */
+static struct clk tcb1_clk = {
+	.name		= "tcb1_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &tcb0_clk,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi1_clk,
 	&ssc0_clk,
 	&ssc1_clk,
-	&tcb_clk,
+	&tcb0_clk,
 	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
@@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&mmc1_clk,
 	// irq0
 	&ohci_clk,
+	&tcb1_clk,
 };
 
 /*
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 809114d..5e71ccd 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = {
 		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
+	[1] = {
 		.start	= AT91SAM9G45_ID_DMA,
 		.end	= AT91SAM9G45_ID_DMA,
 		.flags	= IORESOURCE_IRQ,
@@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
 static void __init at91_add_device_tc(void)
 {
 	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c4c8865..65eb094 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
 		.start	= AT91_PIN_PC11,
 		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {
@@ -168,17 +169,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
 
 
 /*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-
-/*
  * NAND flash
  */
 static struct mtd_partition __initdata ek_nand_partition[] = {
@@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void)
 	at91_add_device_nand(&ek_nand_data);
 }
 
+/*
+ * SPI related devices
+ */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 
 /*
  * ADS7846 Touchscreen
@@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+#else /* CONFIG_SPI_ATMEL_* */
+/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+};
+
+#endif /* CONFIG_SPI_ATMEL_* */
+
 
 /*
  * LCD Controller
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7f7da43..7525cee 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
-		clk->parent = &mck;
+		if (!clk->parent)
+			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
 		list_add_tail(&clk->node, &clocks);
 	}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 8bf3cec..4566bd1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void)
 	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
 	return 0;
 }
-arch_initcall(ep93xx_clock_init);
+postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index 91931dc..4aaadc7 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd25_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index a5f0174..e064bb3 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+	eukrea_mbimxsd25_baseboard_init();
 #endif
 }
 
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index d3af0fd..7a62e74 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 	if (aad->sel)
-		fref = fref * 2 / 3;
+		fref = fref * 3 / 4;
 
 	return fref / aad->arm;
 }
@@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
+	unsigned long fref = get_rate_arm();
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
@@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
 	return get_rate_ahb(NULL) >> 1;
 }
 
-static unsigned long get_3_3_div(unsigned long in)
-{
-	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
-}
-
 static unsigned long get_rate_uart(struct clk *clk)
 {
 	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div = get_3_3_div(pdr4 >> 10);
+	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
 
 	if (pdr3 & (1 << 14))
 		return get_rate_arm() / div;
@@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
 		break;
 	}
 
-	return rate / get_3_3_div(div);
+	return rate / (div + 1);
 }
 
 static unsigned long get_rate_mshc(struct clk *clk)
@@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+	return rate / (((pdr2 >> 16) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_otg(struct clk *clk)
@@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+	return rate / (((pdr4 >> 22) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div1, div2;
+	unsigned long div;
 
 	if (pdr0 & (1 << 26)) {
-		div1 = (pdr4 >> 19) & 0x7;
-		div2 = (pdr4 >> 16) & 0x7;
-		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+		div = (pdr4 >> 16) & 0x3f;
+		return get_rate_arm() / (div + 1);
 	} else {
-		div1 = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / div1;
+		div = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / (div + 1);
 	}
 }
 
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+	unsigned long fref = get_rate_mpll();
+
+	if (fref > 400 * 1000 * 1000) {
+		switch (hsp_podf) {
+		case 0:
+			return fref >> 2;
+		case 1:
+			return fref >> 3;
+		case 2:
+			return fref / 3;
+		}
+	} else {
+		switch (hsp_podf) {
+		case 0:
+		case 2:
+			return fref / 3;
+		case 1:
+			return fref / 6;
+		}
+	}
+
+	return 0;
+}
+
 static int clk_cgr_enable(struct clk *clk)
 {
 	u32 reg;
@@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_ahb, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int ll = 0;
+	unsigned int cgr2 = 3 << 26, cgr3 = 0;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	ll = (3 << 16);
+	cgr2 |= 3 << 16;
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -499,8 +520,20 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
-	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
-	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	/*
+	 * Check if we came up in internal boot mode. If yes, we need some
+	 * extra clocks turned on, otherwise the MX35 boot ROM code will
+	 * hang after a watchdog reset.
+	 */
+	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+		/* Additionally turn on UART1, SCC, and IIM clocks */
+		cgr2 |= 3 << 16 | 3 << 4;
+		cgr3 |= 3 << 2;
+	}
+
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
 	mxc_timer_init(&gpt_clk,
 			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 1dc5004..f8f15e3 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd35_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 9770a6a..2a4f8b7 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+	eukrea_mbimxsd35_baseboard_init();
 #endif
 }
 
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 6af69de..57c10a9 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk)
 {
 	u32 reg;
 	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
 	__raw_writel(reg, clk->enable_reg);
 
 }
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 63b2d88..88d3a1e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
+AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
 # Functions loaded to SRAM
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 138646d..dfdce2d 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3417,7 +3417,13 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = CK_3XXX;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap3517()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3517;
+	} else if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3505;
+	} else if (cpu_is_omap34xx()) {
 		cpu_mask = RATE_IN_3XXX;
 		cpu_clkflg |= CK_343X;
 
@@ -3432,12 +3438,6 @@ int __init omap3xxx_clk_init(void)
 			cpu_mask |= RATE_IN_3430ES2PLUS;
 			cpu_clkflg |= CK_3430ES2;
 		}
-	} else if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3517;
-	} else if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3505;
 	}
 
 	if (omap3_has_192mhz_clk())
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index e8256a2..9a879f9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -284,8 +284,8 @@ static void __init omap3_check_revision(void)
 		default:
 			omap_revision =  OMAP3630_REV_ES1_2;
 			omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
-			break;
 		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		omap_revision =  OMAP3630_REV_ES1_2;
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index 50fd749..06e64e1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -177,7 +177,10 @@ omap_irq_base:	.word	0
 		cmpne   \irqnr, \tmp
 		cmpcs   \irqnr, \irqnr
 		.endm
+#endif
+#endif	/* MULTI_OMAP2 */
 
+#ifdef CONFIG_SMP
 		/* We assume that irqstat (the raw value of the IRQ acknowledge
 		 * register) is preserved from the macro above.
 		 * If there is an IPI, we immediately signal end of interrupt
@@ -205,8 +208,7 @@ omap_irq_base:	.word	0
 		streq	\irqstat, [\base, #GIC_CPU_EOI]
 		cmp	\tmp, #0
 		.endm
-#endif
-#endif	/* MULTI_OMAP2 */
+#endif	/* CONFIG_SMP */
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index af3c20c..9e9f70e 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -102,8 +102,7 @@ static void __init wakeup_secondary(void)
 	 * Send a 'sev' to wake the secondary core from WFE.
 	 * Drain the outstanding writes to memory
 	 */
-	dsb();
-	set_event();
+	dsb_sev();
 	mb();
 }
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fb4994a..7b03426 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -480,7 +480,9 @@ void omap_sram_idle(void)
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (omap3_has_io_wakeup() && core_next_state < PWRDM_POWER_ON) {
+	if (omap3_has_io_wakeup() &&
+	    (per_next_state < PWRDM_POWER_ON ||
+	     core_next_state < PWRDM_POWER_ON)) {
 		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 268a9bc..50d5939 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -398,7 +398,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
 	unsigned int freq;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 27fa329..0a0d0fe 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret = -EINVAL;
 
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index 7139e0d..4e12870 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -71,10 +71,10 @@
 #define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
 #define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
 #define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
 #define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
 #define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+#define GPIO51_CI_HSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO52_CI_VSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
 
 /* KEYPAD */
 #define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 315b007..54297eb 100644
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xE0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
index 7411ef3..bc0e913 100644
--- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xE0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
index 16df257..e3f0eeb 100644
--- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xE0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
index be33336..f5c83f0 100644
--- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xE0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
index 58f515e..df9a288 100644
--- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -17,6 +17,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H __FILE__
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	(0xE0000000UL)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c
index 77f2b4d..26a0f03 100644
--- a/arch/arm/mach-s5pv310/clock.c
+++ b/arch/arm/mach-s5pv310/clock.c
@@ -30,6 +30,16 @@ static struct clk clk_sclk_hdmi27m = {
 	.rate		= 27000000,
 };
 
+static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
+}
+
+static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk clk_mout_apll = {
@@ -39,6 +49,14 @@ static struct clksrc_clk clk_mout_apll = {
 	},
 	.sources	= &clk_src_apll,
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_apll = {
+	.clk	= {
+		.name		= "sclk_apll",
+		.id		= -1,
+		.parent		= &clk_mout_apll.clk,
+	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
 };
 
@@ -61,7 +79,7 @@ static struct clksrc_clk clk_mout_mpll = {
 };
 
 static struct clk *clkset_moutcore_list[] = {
-	[0] = &clk_mout_apll.clk,
+	[0] = &clk_sclk_apll.clk,
 	[1] = &clk_mout_mpll.clk,
 };
 
@@ -154,7 +172,7 @@ static struct clksrc_clk clk_pclk_dbg = {
 
 static struct clk *clkset_corebus_list[] = {
 	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_mout_apll.clk,
+	[1] = &clk_sclk_apll.clk,
 };
 
 static struct clksrc_sources clkset_mout_corebus = {
@@ -220,7 +238,7 @@ static struct clksrc_clk clk_pclk_acp = {
 
 static struct clk *clkset_aclk_top_list[] = {
 	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_mout_apll.clk,
+	[1] = &clk_sclk_apll.clk,
 };
 
 static struct clksrc_sources clkset_aclk_200 = {
@@ -321,11 +339,6 @@ static struct clksrc_clk clk_sclk_vpll = {
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
 };
 
-static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
-}
-
 static struct clk init_clocks_disable[] = {
 	{
 		.name		= "timers",
@@ -337,7 +350,37 @@ static struct clk init_clocks_disable[] = {
 };
 
 static struct clk init_clocks[] = {
-	/* Nothing here yet */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 4,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "uart",
+		.id		= 5,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 5),
+	}
 };
 
 static struct clk *clkset_group_list[] = {
@@ -359,8 +402,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk	= {
 			.name		= "uclk1",
 			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 0),
-			.enable		= s5pv310_clk_ip_peril_ctrl,
 		},
 		.sources = &clkset_group,
 		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
@@ -369,8 +412,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 1,
-			.enable		= s5pv310_clk_ip_peril_ctrl,
-			.ctrlbit	= (1 << 1),
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 4),
 		},
 		.sources = &clkset_group,
 		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
@@ -379,8 +422,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 2,
-			.enable		= s5pv310_clk_ip_peril_ctrl,
-			.ctrlbit	= (1 << 2),
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 8),
 		},
 		.sources = &clkset_group,
 		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
@@ -389,8 +432,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 3,
-			.enable		= s5pv310_clk_ip_peril_ctrl,
-			.ctrlbit	= (1 << 3),
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 12),
 		},
 		.sources = &clkset_group,
 		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
@@ -399,7 +442,7 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_pwm",
 			.id		= -1,
-			.enable		= s5pv310_clk_ip_peril_ctrl,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 24),
 		},
 		.sources = &clkset_group,
@@ -411,6 +454,7 @@ static struct clksrc_clk clksrcs[] = {
 /* Clock initialization code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
+	&clk_sclk_apll,
 	&clk_mout_epll,
 	&clk_mout_mpll,
 	&clk_moutcore,
@@ -470,11 +514,11 @@ void __init_or_cpufreq s5pv310_setup_clocks(void)
 	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
 	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
-				__raw_readl(S5P_EPLL_CON1), pll_4500);
+				__raw_readl(S5P_EPLL_CON1), pll_4600);
 
 	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4502);
+				__raw_readl(S5P_VPLL_CON1), pll_4650);
 
 	clk_fout_apll.rate = apll;
 	clk_fout_mpll.rate = mpll;
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
index 196c9f1..e5b261a 100644
--- a/arch/arm/mach-s5pv310/cpu.c
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -45,6 +45,16 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5PV310_PA_L2CC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(S5PV310_PA_SYSRAM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h
index 56885ca..4cdedda 100644
--- a/arch/arm/mach-s5pv310/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
@@ -15,12 +15,14 @@
 
 #include <plat/irqs.h>
 
-/* Private Peripheral Interrupt */
+/* PPI: Private Peripheral Interrupt */
+
 #define IRQ_PPI(x)		S5P_IRQ(x+16)
 
 #define IRQ_LOCALTIMER		IRQ_PPI(13)
 
-/* Shared Peripheral Interrupt */
+/* SPI: Shared Peripheral Interrupt */
+
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
 
 #define IRQ_EINT0		IRQ_SPI(40)
@@ -36,7 +38,7 @@
 #define IRQ_PCIE		IRQ_SPI(50)
 #define IRQ_SYSTEM_TIMER	IRQ_SPI(51)
 #define IRQ_MFC			IRQ_SPI(52)
-#define IRQ_WTD			IRQ_SPI(53)
+#define IRQ_WDT			IRQ_SPI(53)
 #define IRQ_AUDIO_SS		IRQ_SPI(54)
 #define IRQ_AC97		IRQ_SPI(55)
 #define IRQ_SPDIF		IRQ_SPI(56)
@@ -67,8 +69,9 @@
 #define IRQ_IIC			COMBINER_IRQ(27, 0)
 
 /* Set the default NR_IRQS */
+
 #define NR_IRQS			COMBINER_IRQ(MAX_COMBINER_NR, 0)
 
 #define MAX_COMBINER_NR		39
 
-#endif /* ASM_ARCH_IRQS_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 87697c9..213e110 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -23,12 +23,16 @@
 
 #include <plat/map-s5p.h>
 
+#define S5PV310_PA_SYSRAM		(0x02025000)
+
 #define S5PV310_PA_CHIPID		(0x10000000)
 #define S5P_PA_CHIPID			S5PV310_PA_CHIPID
 
 #define S5PV310_PA_SYSCON		(0x10020000)
 #define S5P_PA_SYSCON			S5PV310_PA_SYSCON
 
+#define S5PV310_PA_CMU			(0x10030000)
+
 #define S5PV310_PA_WATCHDOG		(0x10060000)
 
 #define S5PV310_PA_COMBINER		(0x10448000)
@@ -39,8 +43,12 @@
 #define S5PV310_PA_GIC_DIST		(0x10501000)
 #define S5PV310_PA_L2CC			(0x10502000)
 
-#define S5PV310_PA_GPIO			(0x11000000)
-#define S5P_PA_GPIO			S5PV310_PA_GPIO
+#define S5PV310_PA_GPIO1		(0x11400000)
+#define S5PV310_PA_GPIO2		(0x11000000)
+#define S5PV310_PA_GPIO3		(0x03860000)
+#define S5P_PA_GPIO			S5PV310_PA_GPIO1
+
+#define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 
 #define S5PV310_PA_UART			(0x13800000)
 
@@ -63,6 +71,10 @@
 
 /* compatibiltiy defines. */
 #define S3C_PA_UART			S5PV310_PA_UART
+#define S3C_PA_HSMMC0			S5PV310_PA_HSMMC(0)
+#define S3C_PA_HSMMC1			S5PV310_PA_HSMMC(1)
+#define S3C_PA_HSMMC2			S5PV310_PA_HSMMC(2)
+#define S3C_PA_HSMMC3			S5PV310_PA_HSMMC(3)
 #define S3C_PA_IIC			S5PV310_PA_IIC0
 #define S3C_PA_WDT			S5PV310_PA_WATCHDOG
 
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
index 59e3a7e..4013553 100644
--- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
@@ -15,48 +15,49 @@
 
 #include <mach/map.h>
 
-#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
+#define S5P_CLKREG(x)			(S5P_VA_CMU + (x))
 
 #define S5P_INFORM0			S5P_CLKREG(0x800)
 
-#define S5P_EPLL_CON0			S5P_CLKREG(0x1C110)
-#define S5P_EPLL_CON1			S5P_CLKREG(0x1C114)
-#define S5P_VPLL_CON0			S5P_CLKREG(0x1C120)
-#define S5P_VPLL_CON1			S5P_CLKREG(0x1C124)
+#define S5P_EPLL_CON0			S5P_CLKREG(0x0C110)
+#define S5P_EPLL_CON1			S5P_CLKREG(0x0C114)
+#define S5P_VPLL_CON0			S5P_CLKREG(0x0C120)
+#define S5P_VPLL_CON1			S5P_CLKREG(0x0C124)
 
-#define S5P_CLKSRC_TOP0			S5P_CLKREG(0x1C210)
-#define S5P_CLKSRC_TOP1			S5P_CLKREG(0x1C214)
+#define S5P_CLKSRC_TOP0			S5P_CLKREG(0x0C210)
+#define S5P_CLKSRC_TOP1			S5P_CLKREG(0x0C214)
 
-#define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x1C250)
+#define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x0C250)
 
-#define S5P_CLKDIV_TOP			S5P_CLKREG(0x1C510)
+#define S5P_CLKDIV_TOP			S5P_CLKREG(0x0C510)
 
-#define S5P_CLKDIV_PERIL0		S5P_CLKREG(0x1C550)
-#define S5P_CLKDIV_PERIL1		S5P_CLKREG(0x1C554)
-#define S5P_CLKDIV_PERIL2		S5P_CLKREG(0x1C558)
-#define S5P_CLKDIV_PERIL3		S5P_CLKREG(0x1C55C)
-#define S5P_CLKDIV_PERIL4		S5P_CLKREG(0x1C560)
-#define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x1C564)
+#define S5P_CLKDIV_PERIL0		S5P_CLKREG(0x0C550)
+#define S5P_CLKDIV_PERIL1		S5P_CLKREG(0x0C554)
+#define S5P_CLKDIV_PERIL2		S5P_CLKREG(0x0C558)
+#define S5P_CLKDIV_PERIL3		S5P_CLKREG(0x0C55C)
+#define S5P_CLKDIV_PERIL4		S5P_CLKREG(0x0C560)
+#define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
 
-#define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x1C950)
+#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
 
-#define S5P_CLKSRC_CORE			S5P_CLKREG(0x20200)
+#define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
 
-#define S5P_CLKDIV_CORE0		S5P_CLKREG(0x20500)
+#define S5P_CLKSRC_CORE			S5P_CLKREG(0x10200)
+#define S5P_CLKDIV_CORE0		S5P_CLKREG(0x10500)
 
-#define S5P_APLL_LOCK			S5P_CLKREG(0x24000)
-#define S5P_MPLL_LOCK			S5P_CLKREG(0x24004)
-#define S5P_APLL_CON0			S5P_CLKREG(0x24100)
-#define S5P_APLL_CON1			S5P_CLKREG(0x24104)
-#define S5P_MPLL_CON0			S5P_CLKREG(0x24108)
-#define S5P_MPLL_CON1			S5P_CLKREG(0x2410C)
+#define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
+#define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
+#define S5P_APLL_CON0			S5P_CLKREG(0x14100)
+#define S5P_APLL_CON1			S5P_CLKREG(0x14104)
+#define S5P_MPLL_CON0			S5P_CLKREG(0x14108)
+#define S5P_MPLL_CON1			S5P_CLKREG(0x1410C)
 
-#define S5P_CLKSRC_CPU			S5P_CLKREG(0x24200)
-#define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x24400)
+#define S5P_CLKSRC_CPU			S5P_CLKREG(0x14200)
+#define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
 
-#define S5P_CLKDIV_CPU			S5P_CLKREG(0x24500)
-#define S5P_CLKDIV_STATCPU		S5P_CLKREG(0x24600)
+#define S5P_CLKDIV_CPU			S5P_CLKREG(0x14500)
+#define S5P_CLKDIV_STATCPU		S5P_CLKREG(0x14600)
 
-#define S5P_CLKGATE_SCLKCPU		S5P_CLKREG(0x24800)
+#define S5P_CLKGATE_SCLKCPU		S5P_CLKREG(0x14800)
 
 #endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
index 3f565eb..256f221 100644
--- a/arch/arm/mach-s5pv310/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
@@ -17,6 +17,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H __FILE__
 
-#define VMALLOC_END	  (0xF0000000)
+#define VMALLOC_END	(0xF0000000UL)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index fe9469ab..d357c19 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -187,6 +187,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		 * until it receives a soft interrupt, and then the
 		 * secondary CPU branches to this address.
 		 */
-	__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_INFORM0);
+	__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
 	}
 }
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 5e16b4c..ae416fe 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o
+obj-y				:= timer.o console.o clock.o pm_runtime.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 23d472f..95935c8 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -39,6 +40,7 @@
 #include <linux/sh_clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 
@@ -307,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
 	.tmio_ocr_mask	= MMC_VDD_165_195,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -558,7 +561,7 @@ static struct resource fsi_resources[] = {
 
 static struct platform_device fsi_device = {
 	.name		= "sh_fsi2",
-	.id		= 0,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(fsi_resources),
 	.resource	= fsi_resources,
 	.dev	= {
@@ -650,7 +653,44 @@ static struct platform_device hdmi_device = {
 	},
 };
 
+static struct gpio_led ap4evb_leds[] = {
+	{
+		.name			= "led4",
+		.gpio			= GPIO_PORT185,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led2",
+		.gpio			= GPIO_PORT186,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led3",
+		.gpio			= GPIO_PORT187,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led1",
+		.gpio			= GPIO_PORT188,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data ap4evb_leds_pdata = {
+	.num_leds = ARRAY_SIZE(ap4evb_leds),
+	.leds = ap4evb_leds,
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &ap4evb_leds_pdata,
+	},
+};
+
 static struct platform_device *ap4evb_devices[] __initdata = {
+	&leds_device,
 	&nor_flash_device,
 	&smc911x_device,
 	&sdhi0_device,
@@ -840,20 +880,6 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_CS5A,	NULL);
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
 
-	/* enable LED 1 - 4 */
-	gpio_request(GPIO_PORT185, NULL);
-	gpio_request(GPIO_PORT186, NULL);
-	gpio_request(GPIO_PORT187, NULL);
-	gpio_request(GPIO_PORT188, NULL);
-	gpio_direction_output(GPIO_PORT185, 1);
-	gpio_direction_output(GPIO_PORT186, 1);
-	gpio_direction_output(GPIO_PORT187, 1);
-	gpio_direction_output(GPIO_PORT188, 1);
-	gpio_export(GPIO_PORT185, 0);
-	gpio_export(GPIO_PORT186, 0);
-	gpio_export(GPIO_PORT187, 0);
-	gpio_export(GPIO_PORT188, 0);
-
 	/* enable Debug switch (S6) */
 	gpio_request(GPIO_PORT32, NULL);
 	gpio_request(GPIO_PORT33, NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index fb4e9b1..7594689 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = {
 
 struct clk pllc2_clk = {
 	.ops		= &pllc2_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
 	.parent		= &extal1_div2_clk,
 	.freq_table	= pllc2_freq_table,
 	.parent_table	= pllc2_parent,
@@ -395,7 +394,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 
 enum { MSTP001,
        MSTP131, MSTP130,
-       MSTP129, MSTP128,
+       MSTP129, MSTP128, MSTP127, MSTP126,
        MSTP118, MSTP117, MSTP116,
        MSTP106, MSTP101, MSTP100,
        MSTP223,
@@ -413,6 +412,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
 	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
 	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
+	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
 	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
 	[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
 	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@@ -428,7 +429,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
 	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
+	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
 	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
 	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
@@ -498,6 +499,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
+	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index b7c705a..6b7c7c4 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -1,8 +1,10 @@
 /*
- * SH-Mobile Timer
+ * SH-Mobile Clock Framework
  *
  * Copyright (C) 2010  Magnus Damm
  *
+ * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
new file mode 100644
index 0000000..94912d3
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -0,0 +1,169 @@
+/*
+ * arch/arm/mach-shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile ARM
+ *
+ *  Copyright (C) 2009-2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/bitmap.h>
+
+#ifdef CONFIG_PM_RUNTIME
+#define BIT_ONCE 0
+#define BIT_ACTIVE 1
+#define BIT_CLK_ENABLED 2
+
+struct pm_runtime_data {
+	unsigned long flags;
+	struct clk *clk;
+};
+
+static void __devres_release(struct device *dev, void *res)
+{
+	struct pm_runtime_data *prd = res;
+
+	dev_dbg(dev, "__devres_release()\n");
+
+	if (test_bit(BIT_CLK_ENABLED, &prd->flags))
+		clk_disable(prd->clk);
+
+	if (test_bit(BIT_ACTIVE, &prd->flags))
+		clk_put(prd->clk);
+}
+
+static struct pm_runtime_data *__to_prd(struct device *dev)
+{
+	return devres_find(dev, __devres_release, NULL, NULL);
+}
+
+static void platform_pm_runtime_init(struct device *dev,
+				     struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
+		prd->clk = clk_get(dev, NULL);
+		if (!IS_ERR(prd->clk)) {
+			set_bit(BIT_ACTIVE, &prd->flags);
+			dev_info(dev, "clocks managed by runtime pm\n");
+		}
+	}
+}
+
+static void platform_pm_runtime_bug(struct device *dev,
+				    struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
+		dev_err(dev, "runtime pm suspend before resume\n");
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_suspend()\n");
+
+	platform_pm_runtime_bug(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_disable(prd->clk);
+		clear_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_resume()\n");
+
+	platform_pm_runtime_init(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_enable(prd->clk);
+		set_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+	/* suspend synchronously to disable clocks immediately */
+	return pm_runtime_suspend(dev);
+}
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct pm_runtime_data *prd;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	if (action == BUS_NOTIFY_BIND_DRIVER) {
+		prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
+		if (prd)
+			devres_add(dev, prd);
+		else
+			dev_err(dev, "unable to alloc memory for runtime pm\n");
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_PM_RUNTIME */
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct clk *clk;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	switch (action) {
+	case BUS_NOTIFY_BIND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced on\n");
+		}
+		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_disable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced off\n");
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_PM_RUNTIME */
+
+static struct notifier_block platform_bus_notifier = {
+	.notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	return 0;
+}
+core_initcall(sh_pm_runtime_init);
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 05e78dd..9e305de 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -91,10 +91,8 @@ static void __init tegra_harmony_fixup(struct machine_desc *desc,
 {
 	mi->nr_banks = 2;
 	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	mi->bank[0].size = 448 * SZ_1M;
 	mi->bank[1].start = SZ_512M;
-	mi->bank[1].node = PHYS_TO_NID(SZ_512M);
 	mi->bank[1].size = SZ_512M;
 }
 
diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h
index 267a141..fd6aa65 100644
--- a/arch/arm/mach-tegra/include/mach/vmalloc.h
+++ b/arch/arm/mach-tegra/include/mach/vmalloc.h
@@ -23,6 +23,6 @@
 
 #include <asm/sizes.h>
 
-#define VMALLOC_END        0xFE000000
+#define VMALLOC_END        0xFE000000UL
 
 #endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 33c3f57..a0a2928 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -398,7 +398,7 @@ config CPU_V6
 # ARMv6k
 config CPU_32v6K
 	bool "Support ARM V6K processor extensions" if !SMP
-	depends on CPU_V6
+	depends on CPU_V6 || CPU_V7
 	default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
 	help
 	  Say Y here if your ARMv6 processor supports the 'K' extension.
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c704eed..4bc43e5 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 			}
 		} while (size -= PAGE_SIZE);
 
+		dsb();
+
 		return (void *)c->vm_start;
 	}
 	return NULL;
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0527e65..6785db4 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -43,6 +43,7 @@ config ARCH_MXC91231
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index 634e3f4..656acb4 100644
--- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -37,9 +37,9 @@
  * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
  */
 
-extern void eukrea_mbimx25_baseboard_init(void);
+extern void eukrea_mbimxsd25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
 extern void eukrea_mbimx51_baseboard_init(void);
 
 #endif
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index b3da9aa..3703ab2 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle)
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++) {
-		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
-		__raw_writel(v, TZIC_WAKEUP0(i));
+		v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
+			wakeup_intr[i];
+		__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
 	}
 
 	return 0;
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index 6a3ff65..5177a9c 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -19,13 +19,6 @@
 
 #include <asm/hardware/gic.h>
 
-/*
- * set_event() is used to wake up secondary core from wfe using sev. ROM
- * code puts the second core into wfe(standby).
- *
- */
-#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
-
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index 0732c6c..ef32686 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm)
 
 static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index 54e9fb9d..c4ff88b 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -17,6 +17,7 @@
 #define S5P_VA_GPIO		S3C_ADDR(0x00500000)
 #define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
 #define S5P_VA_SROMC		S3C_ADDR(0x01100000)
+#define S5P_VA_SYSRAM		S3C_ADDR(0x01180000)
 
 #define S5P_VA_COMBINER_BASE	S3C_ADDR(0x00600000)
 #define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
@@ -29,6 +30,7 @@
 #define S5P_VA_GIC_DIST		S5P_VA_COREPERI(0x1000)
 
 #define S5P_VA_L2CC		S3C_ADDR(0x00900000)
+#define S5P_VA_CMU		S3C_ADDR(0x00920000)
 
 #define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_VA_UART0		S5P_VA_UART(0)
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 48cbdcb..55590a4 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 12 21:10:14 2010
+# Last update: Thu Sep 9 22:43:01 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2622,7 +2622,7 @@ kraken			MACH_KRAKEN		KRAKEN			2634
 gw2388			MACH_GW2388		GW2388			2635
 jadecpu			MACH_JADECPU		JADECPU			2636
 carlisle		MACH_CARLISLE		CARLISLE		2637
-lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+lux_sf9			MACH_LUX_SF9		LUX_SF9			2638
 nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
 terrier			MACH_TERRIER		TERRIER			2640
 turbot			MACH_TURBOT		TURBOT			2641
@@ -2950,3 +2950,97 @@ davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
 netviz			MACH_NETVIZ		NETVIZ			2964
 flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
 wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
+lpc24xx			MACH_LPC24XX		LPC24XX			2967
+spica			MACH_SPICA		SPICA			2968
+gpsdisplay		MACH_GPSDISPLAY		GPSDISPLAY		2969
+bipnet			MACH_BIPNET		BIPNET			2970
+overo_ctu_inertial	MACH_OVERO_CTU_INERTIAL	OVERO_CTU_INERTIAL	2971
+davinci_dm355_mmm	MACH_DAVINCI_DM355_MMM	DAVINCI_DM355_MMM	2972
+pc9260_v2		MACH_PC9260_V2		PC9260_V2		2973
+ptx7545			MACH_PTX7545		PTX7545			2974
+tm_efdc			MACH_TM_EFDC		TM_EFDC			2975
+omap3_waldo1		MACH_OMAP3_WALDO1	OMAP3_WALDO1		2977
+flyer			MACH_FLYER		FLYER			2978
+tornado3240		MACH_TORNADO3240	TORNADO3240		2979
+soli_01			MACH_SOLI_01		SOLI_01			2980
+omapl138_europalc	MACH_OMAPL138_EUROPALC	OMAPL138_EUROPALC	2981
+helios_v1		MACH_HELIOS_V1		HELIOS_V1		2982
+netspace_lite_v2	MACH_NETSPACE_LITE_V2	NETSPACE_LITE_V2	2983
+ssc			MACH_SSC		SSC			2984
+premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
+wasabi			MACH_WASABI		WASABI			2986
+vivow			MACH_VIVOW		VIVOW			2987
+mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
+universal		MACH_UNIVERSAL		UNIVERSAL		2989
+real6410		MACH_REAL6410		REAL6410		2990
+spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
+ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
+omap3_bc10		MACH_OMAP3_BC10		OMAP3_BC10		2993
+thebe			MACH_THEBE		THEBE			2994
+rv082			MACH_RV082		RV082			2995
+armlguest		MACH_ARMLGUEST		ARMLGUEST		2996
+tjinc1000		MACH_TJINC1000		TJINC1000		2997
+dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
+ax8008			MACH_AX8008		AX8008			2999
+gnet_sgce		MACH_GNET_SGCE		GNET_SGCE		3000
+pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
+ea20			MACH_EA20		EA20			3002
+awm2			MACH_AWM2		AWM2			3003
+ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
+tegra_seaboard		MACH_TEGRA_SEABOARD	TEGRA_SEABOARD		3005
+linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
+tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
+rubys			MACH_RUBYS		RUBYS			3008
+aquarius		MACH_AQUARIUS		AQUARIUS		3009
+mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
+mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
+lswxl			MACH_LSWXL		LSWXL			3012
+dove_avng_v3		MACH_DOVE_AVNG_V3	DOVE_AVNG_V3		3013
+sdi_ess_9263		MACH_SDI_ESS_9263	SDI_ESS_9263		3014
+jocpu550		MACH_JOCPU550		JOCPU550		3015
+msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
+msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
+yanomami		MACH_YANOMAMI		YANOMAMI		3018
+gta04			MACH_GTA04		GTA04			3019
+cm_a510			MACH_CM_A510		CM_A510			3020
+omap3_rfs200		MACH_OMAP3_RFS200	OMAP3_RFS200		3021
+kx33xx			MACH_KX33XX		KX33XX			3022
+ptx7510			MACH_PTX7510		PTX7510			3023
+top9000			MACH_TOP9000		TOP9000			3024
+teenote			MACH_TEENOTE		TEENOTE			3025
+ts3			MACH_TS3		TS3			3026
+a0			MACH_A0			A0			3027
+fsm9xxx_surf		MACH_FSM9XXX_SURF	FSM9XXX_SURF		3028
+fsm9xxx_ffa		MACH_FSM9XXX_FFA	FSM9XXX_FFA		3029
+frrhwcdma60w		MACH_FRRHWCDMA60W	FRRHWCDMA60W		3030
+remus			MACH_REMUS		REMUS			3031
+at91cap7xdk		MACH_AT91CAP7XDK	AT91CAP7XDK		3032
+at91cap7stk		MACH_AT91CAP7STK	AT91CAP7STK		3033
+kt_sbc_sam9_1		MACH_KT_SBC_SAM9_1	KT_SBC_SAM9_1		3034
+oratisrouter		MACH_ORATISROUTER	ORATISROUTER		3035
+armada_xp_db		MACH_ARMADA_XP_DB	ARMADA_XP_DB		3036
+spdm			MACH_SPDM		SPDM			3037
+gtib			MACH_GTIB		GTIB			3038
+dgm3240			MACH_DGM3240		DGM3240			3039
+atlas_i_lpe		MACH_ATLAS_I_LPE	ATLAS_I_LPE		3040
+htcmega			MACH_HTCMEGA		HTCMEGA			3041
+tricorder		MACH_TRICORDER		TRICORDER		3042
+tx28			MACH_TX28		TX28			3043
+bstbrd			MACH_BSTBRD		BSTBRD			3044
+pwb3090			MACH_PWB3090		PWB3090			3045
+idea6410		MACH_IDEA6410		IDEA6410		3046
+qbc9263			MACH_QBC9263		QBC9263			3047
+borabora		MACH_BORABORA		BORABORA		3048
+valdez			MACH_VALDEZ		VALDEZ			3049
+ls9g20			MACH_LS9G20		LS9G20			3050
+mios_v1			MACH_MIOS_V1		MIOS_V1			3051
+s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
+controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
+tin307			MACH_TIN307		TIN307			3054
+tin510			MACH_TIN510		TIN510			3055
+bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
+tem3x30			MACH_TEM3X30		TEM3X30			3058
+harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
+msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
+spear900		MACH_SPEAR900		SPEAR900		3061
+pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062