Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...

15 files changed, 56 insertions, 96 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bbddefe..a39e321 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -15,6 +15,7 @@ config ARM
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h
index 5a85f14..21a23e3 100644
--- a/arch/arm/include/asm/system_misc.h
+++ b/arch/arm/include/asm/system_misc.h
@@ -21,9 +21,6 @@ extern void (*arm_pm_idle)(void);
 
 extern unsigned int user_debug;
 
-extern void disable_hlt(void);
-extern void enable_hlt(void);
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_ARM_SYSTEM_MISC_H */
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 047d3e4..c9a5e2c 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -57,38 +57,6 @@ static const char *isa_modes[] = {
   "ARM" , "Thumb" , "Jazelle", "ThumbEE"
 };
 
-static volatile int hlt_counter;
-
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-	BUG_ON(hlt_counter < 0);
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
-static int __init nohlt_setup(char *__unused)
-{
-	hlt_counter = 1;
-	return 1;
-}
-
-static int __init hlt_setup(char *__unused)
-{
-	hlt_counter = 0;
-	return 1;
-}
-
-__setup("nohlt", nohlt_setup);
-__setup("hlt", hlt_setup);
-
 extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
 typedef void (*phys_reset_t)(unsigned long);
 
@@ -172,54 +140,38 @@ static void default_idle(void)
 	local_irq_enable();
 }
 
-/*
- * The idle thread.
- * We always respect 'hlt_counter' to prevent low power idle.
- */
-void cpu_idle(void)
+void arch_cpu_idle_prepare(void)
 {
 	local_fiq_enable();
+}
 
-	/* endless idle loop with no priority at all */
-	while (1) {
-		tick_nohz_idle_enter();
-		rcu_idle_enter();
-		ledtrig_cpu(CPU_LED_IDLE_START);
-		while (!need_resched()) {
-#ifdef CONFIG_HOTPLUG_CPU
-			if (cpu_is_offline(smp_processor_id()))
-				cpu_die();
+void arch_cpu_idle_enter(void)
+{
+	ledtrig_cpu(CPU_LED_IDLE_START);
+#ifdef CONFIG_PL310_ERRATA_769419
+	wmb();
 #endif
+}
 
-			/*
-			 * We need to disable interrupts here
-			 * to ensure we don't miss a wakeup call.
-			 */
-			local_irq_disable();
-#ifdef CONFIG_PL310_ERRATA_769419
-			wmb();
+void arch_cpu_idle_exit(void)
+{
+	ledtrig_cpu(CPU_LED_IDLE_END);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+	cpu_die();
+}
 #endif
-			if (hlt_counter) {
-				local_irq_enable();
-				cpu_relax();
-			} else if (!need_resched()) {
-				stop_critical_timings();
-				if (cpuidle_idle_call())
-					default_idle();
-				start_critical_timings();
-				/*
-				 * default_idle functions must always
-				 * return with IRQs enabled.
-				 */
-				WARN_ON(irqs_disabled());
-			} else
-				local_irq_enable();
-		}
-		ledtrig_cpu(CPU_LED_IDLE_END);
-		rcu_idle_exit();
-		tick_nohz_idle_exit();
-		schedule_preempt_disabled();
-	}
+
+/*
+ * Called from the core idle loop.
+ */
+void arch_cpu_idle(void)
+{
+	if (cpuidle_idle_call())
+		default_idle();
 }
 
 static char reboot_mode = 'h';
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 1f2cccc..4619177 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -336,7 +336,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_idle();
+	cpu_startup_entry(CPUHP_ONLINE);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
index 92bbd6b..87dff4f 100644
--- a/arch/arm/mach-gemini/idle.c
+++ b/arch/arm/mach-gemini/idle.c
@@ -13,9 +13,11 @@ static void gemini_idle(void)
 	 * will never wakeup... Acctualy it is not very good to enable
 	 * interrupts first since scheduler can miss a tick, but there is
 	 * no other way around this. Platforms that needs it for power saving
-	 * should call enable_hlt() in init code, since by default it is
+	 * should enable it in init code, since by default it is
 	 * disabled.
 	 */
+
+	/* FIXME: Enabling interrupts here is racy! */
 	local_irq_enable();
 	cpu_do_idle();
 }
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 020852d..6d8f6d1 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -15,6 +15,8 @@
 #include <linux/stddef.h>
 #include <linux/list.h>
 #include <linux/sched.h>
+#include <linux/cpu.h>
+
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/system_misc.h>
@@ -77,7 +79,7 @@ void __init gemini_init_irq(void)
 	 * Disable the idle handler by default since it is buggy
 	 * For more info see arch/arm/mach-gemini/idle.c
 	 */
-	disable_hlt();
+	cpu_idle_poll_ctrl(true);
 
 	request_resource(&iomem_resource, &irq_resource);
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1dbeb7c..6600cff 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/gpio.h>
+#include <linux/cpu.h>
 
 #include <mach/udc.h>
 #include <mach/hardware.h>
@@ -239,7 +240,7 @@ void __init ixp4xx_init_irq(void)
 	 * ixp4xx does not implement the XScale PWRMODE register
 	 * so it must not call cpu_do_idle().
 	 */
-	disable_hlt();
+	cpu_idle_poll_ctrl(true);
 
 	/* Route all sources to IRQ instead of FIQ */
 	*IXP4XX_ICLR = 0x0;
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 7a7690a..db37f49 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -43,6 +43,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/atomic.h>
+#include <linux/cpu.h>
 
 #include <asm/fncpy.h>
 #include <asm/system_misc.h>
@@ -584,8 +585,7 @@ static void omap_pm_init_proc(void)
 static int omap_pm_prepare(void)
 {
 	/* We cannot sleep in idle until we have resumed */
-	disable_hlt();
-
+	cpu_idle_poll_ctrl(true);
 	return 0;
 }
 
@@ -621,7 +621,7 @@ static int omap_pm_enter(suspend_state_t state)
 
 static void omap_pm_finish(void)
 {
-	enable_hlt();
+	cpu_idle_poll_ctrl(false);
 }
 
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index a202a47..e512253 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -138,6 +138,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/bootmem.h>
+#include <linux/cpu.h>
 
 #include <asm/system_misc.h>
 
@@ -2157,7 +2158,7 @@ static int _enable(struct omap_hwmod *oh)
 	if (soc_ops.enable_module)
 		soc_ops.enable_module(oh);
 	if (oh->flags & HWMOD_BLOCK_WFI)
-		disable_hlt();
+		cpu_idle_poll_ctrl(true);
 
 	if (soc_ops.update_context_lost)
 		soc_ops.update_context_lost(oh);
@@ -2221,7 +2222,7 @@ static int _idle(struct omap_hwmod *oh)
 	_del_initiator_dep(oh, mpu_oh);
 
 	if (oh->flags & HWMOD_BLOCK_WFI)
-		enable_hlt();
+		cpu_idle_poll_ctrl(false);
 	if (soc_ops.disable_module)
 		soc_ops.disable_module(oh);
 
@@ -2331,7 +2332,7 @@ static int _shutdown(struct omap_hwmod *oh)
 		_del_initiator_dep(oh, mpu_oh);
 		/* XXX what about the other system initiators here? dma, dsp */
 		if (oh->flags & HWMOD_BLOCK_WFI)
-			enable_hlt();
+			cpu_idle_poll_ctrl(false);
 		if (soc_ops.disable_module)
 			soc_ops.disable_module(oh);
 		_disable_clocks(oh);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 673a4c1..dec5533 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -218,7 +218,7 @@ static int omap_pm_enter(suspend_state_t suspend_state)
 
 static int omap_pm_begin(suspend_state_t state)
 {
-	disable_hlt();
+	cpu_idle_poll_ctrl(true);
 	if (cpu_is_omap34xx())
 		omap_prcm_irq_prepare();
 	return 0;
@@ -226,8 +226,7 @@ static int omap_pm_begin(suspend_state_t state)
 
 static void omap_pm_end(void)
 {
-	enable_hlt();
-	return;
+	cpu_idle_poll_ctrl(false);
 }
 
 static void omap_pm_finish(void)
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 35a8014..94fbb81 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/cpu.h>
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
 #include <mach/orion5x.h>
@@ -52,7 +53,7 @@ static void __init orion5x_dt_init(void)
 	 */
 	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
 		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
-		disable_hlt();
+		cpu_idle_poll_ctrl(true);
 	}
 
 	if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2"))
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index d068f14..ad71c8a 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -293,7 +293,7 @@ void __init orion5x_init(void)
 	 */
 	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
 		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
-		disable_hlt();
+		cpu_idle_poll_ctrl(true);
 	}
 
 	/*
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index b63dec8..1535557 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/serial_8250.h>
 #include <linux/io.h>
+#include <linux/cpu.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -130,7 +131,7 @@ static void __init shark_timer_init(void)
 
 static void shark_init_early(void)
 {
-	disable_hlt();
+	cpu_idle_poll_ctrl(true);
 }
 
 MACHINE_START(SHARK, "Shark")
diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c
index 47d83f7..5d92b5d 100644
--- a/arch/arm/mach-shmobile/suspend.c
+++ b/arch/arm/mach-shmobile/suspend.c
@@ -12,6 +12,8 @@
 #include <linux/suspend.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/cpu.h>
+
 #include <asm/io.h>
 #include <asm/system_misc.h>
 
@@ -23,13 +25,13 @@ static int shmobile_suspend_default_enter(suspend_state_t suspend_state)
 
 static int shmobile_suspend_begin(suspend_state_t state)
 {
-	disable_hlt();
+	cpu_idle_poll_ctrl(true);
 	return 0;
 }
 
 static void shmobile_suspend_end(void)
 {
-	enable_hlt();
+	cpu_idle_poll_ctrl(false);
 }
 
 struct platform_suspend_ops shmobile_suspend_ops = {
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 7abdb96..e65a80a 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/cpu.h>
 
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/mtd.h>
@@ -531,7 +532,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = {
 
 void __init nuc900_board_init(struct platform_device **device, int size)
 {
-	disable_hlt();
+	cpu_idle_poll_ctrl(true);
 	platform_add_devices(device, size);
 	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
 	spi_register_board_info(nuc900_spi_board_info,