diff options
author | Florian Tobias Schandinat <FlorianSchandinat@gmx.de> | 2012-03-06 08:09:16 (GMT) |
---|---|---|
committer | Florian Tobias Schandinat <FlorianSchandinat@gmx.de> | 2012-03-06 08:09:16 (GMT) |
commit | d282e4d9353b9e7971713aa9e78da716e4a1262d (patch) | |
tree | 123aa2391841f37f4b8ae80c02eda4094e17994a /arch/arm | |
parent | 2c0fad8e907abf059b21bdb24d183dcbf8d14c10 (diff) | |
parent | 192cfd58774b4d17b2fe8bdc77d89c2ef4e0591d (diff) | |
download | linux-d282e4d9353b9e7971713aa9e78da716e4a1262d.tar.xz |
Merge commit 'v3.3-rc6' into fbdev-next
Diffstat (limited to 'arch/arm')
49 files changed, 405 insertions, 159 deletions
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b..fb1f1cf 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a4..ff3ad22 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095..23371b1 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa81..c182138 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8..cb8d638 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e33870f..ede6443 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa..7a79b24 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52..9e3b90d 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566..c74de01 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdb..f273528 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb760..3588a55 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17ea..ada1213 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> -#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af0..bc97170 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369e..be2002f 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -416,13 +416,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + innovator_config[0].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + innovator_config[0].data = &innovator1610_lcd_config; } #endif omap_board_config = innovator_config; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d965da4..e20c8ab 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11..6722627 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bea..c877236 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index febffde..7e9338e 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86..72e018b 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 9970331..bbb870c 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b40c288..19dd165 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) @@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29..fb11b44 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 609ea2d..2cc1aa0 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) @@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void) platform_driver_unregister(&omap2_mbox_driver); } -module_init(omap2_mbox_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap2_mbox_init); module_exit(omap2_mbox_exit); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fb8bc9f..611a0e3 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc..ebc5950 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -24,6 +24,7 @@ #include <plat/irqs.h> #include <plat/sram.h> +#include <plat/omap-secure.h> #include <mach/hardware.h> #include <mach/omap-wakeupgen.h> @@ -43,6 +44,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -52,18 +56,20 @@ void omap_bus_sync(void) } } -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +81,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe9..5a65dd0 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc78..f51348d 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f..57db203 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d02..c3115f6 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62d..208eef1 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include <mach/hx4700.h> #include <mach/irda.h> +#include <sound/ak4641.h> #include <video/platform_lcd.h> #include <video/w100fb.h> @@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { }; /* + * Asahi Kasei AK4641 on I2C + */ + +static struct ak4641_platform_data ak4641_info = { + .gpio_power = GPIO27_HX4700_CODEC_ON, + .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("ak4641", 0x12), + .platform_data = &ak4641_info, + }, +}; + +static struct platform_device audio = { + .name = "hx4700-audio", + .id = -1, +}; + + +/* * PCMCIA */ @@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = { &gpio_vbus, &power_supply, &strataflash, + &audio, &pcmcia, }; @@ -827,6 +851,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c..00d6eac 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,7 +25,6 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbc..c1673b3 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809..5aded5e 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d..30989ba 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR (1u << 7) +extern int max1111_read_channel(int); /* * Read MAX1111 ADC */ @@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac..438f02f 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { unsigned long ret; - ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) - | (!gpio_get_value(SPITZ_GPIO_SYNC) - << GPIO_bit(SPITZ_GPIO_SYNC)); + | gpio_get_value(SPITZ_GPIO_SYNC)); return ret; } diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96..068b754 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> @@ -37,7 +38,6 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/dma-mapping.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a34..eeb4d96 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceee..c8e7ca2 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd..a281324 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> -#include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -208,6 +193,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction @@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1423,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6..7727cca 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515..cad5757 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0..9857595 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f..d14c9b0 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585..336093f 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d6..2d0d421 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca24..7edef91 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 7a24d39..a655d3d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -55,7 +55,7 @@ loop1: cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache #ifdef CONFIG_PREEMPT - save_and_disable_irqs r9 @ make cssr&csidr read atomic + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic #endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b5..4de7d1e 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -69,6 +69,7 @@ void __init omap_reserve(void) omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 3047ff9..8c7994c 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ |