diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-02 21:23:01 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-02 21:23:01 (GMT) |
commit | ee1a8d402e7e204d57fb108aa40003b6d1633036 (patch) | |
tree | 3abf4be63d11bbbd04c89bd668a17533f942b911 /arch/arm | |
parent | 40e71e7015ab85c8606f50736525220948a3b24b (diff) | |
parent | 9686bb66a4c50e43ffee903a9fc62237ee2de1e6 (diff) | |
download | linux-ee1a8d402e7e204d57fb108aa40003b6d1633036.tar.xz |
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree changes from Arnd Bergmann:
"These changes from 30 individual branches for the most part update
device tree files, but there are also a few source code changes that
have crept in this time, usually in order to atomically move over a
driver from using hardcoded data to DT probing.
A number of platforms change their DT files to use the C preprocessor,
which is causing a bit of churn, but that is hopefully only this once"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
ARM: at91: dt: rm9200ek: add spi support
ARM: at91: dt: rm9200: add spi support
ARM: at91/DT: at91sam9n12: add SPI DMA client infos
ARM: at91/DT: sama5d3: add SPI DMA client infos
ARM: at91/DT: fix SPI compatibility string
ARM: Kirkwood: Fix the internal register ranges translation
ARM: dts: bcm281xx: change comment to C89 style
ARM: mmc: bcm281xx SDHCI driver (dt mods)
ARM: nomadik: add the new clocks to the device tree
clk: nomadik: implement the Nomadik clocks properly
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap4-panda: Add USB Host support
arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
ARM: shmobile: irqpin: add a DT property to enable masking on parent
ARM: dts: AM43x EPOS EVM support
ARM: dts: OMAP5: Add bandgap DT entry
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
...
Diffstat (limited to 'arch/arm')
261 files changed, 13440 insertions, 2610 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f9eae2f..962c0ee 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -16,11 +16,13 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb # sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb # sam9g45 dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb @@ -86,6 +88,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb \ @@ -105,13 +109,15 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ imx27-pdk.dtb \ - imx27-phytec-phycore.dtb \ + imx27-phytec-phycore-som.dtb \ + imx27-phytec-phycore-rdk.dtb \ imx31-bug.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx53-ard.dtb \ imx53-evk.dtb \ + imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ @@ -119,10 +125,13 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-sabresd.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ + imx6q-phytec-pbab01.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ - imx6q-sbc6x.dtb + imx6q-sbc6x.dtb \ + imx6sl-evk.dtb \ + vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ @@ -132,6 +141,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10036.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ + imx28-cfa10055.dtb \ + imx28-cfa10057.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ @@ -151,19 +162,26 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap4-panda-es.dtb \ omap4-var-som.dtb \ omap4-sdp.dtb \ - omap5-evm.dtb \ + omap4-sdp-es23plus.dtb \ + omap5-uevm.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ - am335x-bone.dtb + am335x-bone.dtb \ + am3517-evm.dtb \ + am3517_mt_ventoux.dtb \ + am43x-epos-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ hrefprev60.dtb \ hrefv60plus.dtb \ + ccu8540.dtb \ ccu9540.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ + r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen-reference.dtb \ r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ @@ -183,6 +201,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ + sun5i-a10s-olinuxino-micro.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -210,8 +229,11 @@ dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ + wm8750-apc8750.dtb \ wm8850-w70v2.dtb -dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ + zynq-zc706.dtb \ + zynq-zed.dtb targets += dtbs targets += $(dtb-y) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 5302f79..04feaf8 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "am33xx.dtsi" +#include "am33xx.dtsi" / { model = "TI AM335x BeagleBone"; @@ -26,24 +26,104 @@ am33xx_pinmux: pinmux@44e10800 { pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; + pinctrl-0 = <&clkout2_pin>; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ - 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ - 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ - 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; }; ocp { - uart1: serial@44e09000 { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; }; i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; clock-frequency = <400000>; @@ -55,31 +135,34 @@ }; leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + compatible = "gpio-leds"; led@2 { label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 0>; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 0>; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 0>; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 0>; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -136,3 +219,16 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0423298..a16bb96 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "am33xx.dtsi" +#include "am33xx.dtsi" / { model = "TI AM335x EVM"; @@ -26,32 +26,143 @@ am33xx_pinmux: pinmux@44e10800 { pinctrl-names = "default"; - pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; matrix_keypad_s0: matrix_keypad_s0 { pinctrl-single,pins = < - 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ - 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ - 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ - 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ - 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; volume_keys_s0: volume_keys_s0 { pinctrl-single,pins = < - 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ - 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; }; ocp { - uart1: serial@44e09000 { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; }; i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; clock-frequency = <400000>; @@ -61,6 +172,9 @@ }; i2c1: i2c@4802a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; clock-frequency = <100000>; @@ -102,6 +216,101 @@ reg = <0x48>; }; }; + + elm: elm@48080000 { + status = "okay"; + }; + + epwmss0: epwmss@48300000 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; + }; + }; + + gpmc: gpmc@50000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + /* MTD partition table */ + partition@0 { + label = "SPL1"; + reg = <0x00000000 0x000020000>; + }; + + partition@1 { + label = "SPL2"; + reg = <0x00020000 0x00020000>; + }; + + partition@2 { + label = "SPL3"; + reg = <0x00040000 0x00020000>; + }; + + partition@3 { + label = "SPL4"; + reg = <0x00060000 0x00020000>; + }; + + partition@4 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; + + partition@5 { + label = "environment"; + reg = <0x00260000 0x00020000>; + }; + + partition@6 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; + + partition@7 { + label = "File-System"; + reg = <0x00780000 0x0F880000>; + }; + }; + }; }; vbat: fixedregulator@0 { @@ -123,12 +332,12 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ - &gpio1 26 0 /* Bank1, pin26 */ - &gpio1 27 0>; /* Bank1, pin27 */ + row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */ + &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */ + &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */ - col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ - &gpio1 22 0>; /* Bank1, pin22 */ + col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */ + &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */ linux,keymap = <0x0000008b /* MENU */ 0x0100009e /* BACK */ @@ -147,20 +356,27 @@ switch@9 { label = "volume-up"; linux,code = <115>; - gpios = <&gpio0 2 1>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; gpio-key,wakeup; }; switch@10 { label = "volume-down"; linux,code = <114>; - gpios = <&gpio0 3 1>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; gpio-key,wakeup; }; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; }; -/include/ "tps65910.dtsi" +#include "tps65910.dtsi" &tps { vcc1-supply = <&vbat>; @@ -237,6 +453,18 @@ }; }; +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index f67c360..9e00eef 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -13,7 +13,7 @@ /dts-v1/; -/include/ "am33xx.dtsi" +#include "am33xx.dtsi" / { model = "TI AM335x EVM-SK"; @@ -32,33 +32,145 @@ am33xx_pinmux: pinmux@44e10800 { pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; + pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ - 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ - 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ - 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ >; }; gpio_keys_s0: gpio_keys_s0 { pinctrl-single,pins = < - 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ - 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ - 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ - 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + ecap2_pins: backlight_pins { + pinctrl-single,pins = < + 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; }; ocp { - uart1: serial@44e09000 { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; }; i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; clock-frequency = <400000>; @@ -94,6 +206,16 @@ st,max-limit-z = <750>; }; }; + + epwmss2: epwmss@48304000 { + status = "okay"; + + ecap2: ecap@48304100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + }; + }; }; vbat: fixedregulator@0 { @@ -111,30 +233,33 @@ }; leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + compatible = "gpio-leds"; led@1 { label = "evmsk:green:usr0"; - gpios = <&gpio1 4 0>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@2 { label = "evmsk:green:usr1"; - gpios = <&gpio1 5 0>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@3 { label = "evmsk:green:mmc0"; - gpios = <&gpio1 6 0>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "evmsk:green:heartbeat"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -148,31 +273,38 @@ switch@1 { label = "button0"; linux,code = <0x100>; - gpios = <&gpio2 3 0>; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; }; switch@2 { label = "button1"; linux,code = <0x101>; - gpios = <&gpio2 2 0>; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; switch@3 { label = "button2"; linux,code = <0x102>; - gpios = <&gpio0 30 0>; + gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; gpio-key,wakeup; }; switch@4 { label = "button3"; linux,code = <0x103>; - gpios = <&gpio2 5 0>; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap2 0 50000 1>; + brightness-levels = <0 58 61 66 75 90 125 170 255>; + default-brightness-level = <8>; + }; }; -/include/ "tps65910.dtsi" +#include "tps65910.dtsi" &tps { vcc1-supply = <&vbat>; @@ -248,3 +380,15 @@ }; }; }; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 77aa1b0..0d4df90 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -8,26 +8,33 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/am33xx.h> + +#include "skeleton.dtsi" / { compatible = "ti,am33xx"; interrupt-parent = <&intc>; aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; d_can0 = &dcan0; d_can1 = &dcan1; }; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; /* * To consider voltage drop between PMIC and SoC, @@ -133,7 +140,7 @@ interrupts = <62>; }; - uart1: serial@44e09000 { + uart0: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; @@ -142,7 +149,7 @@ status = "disabled"; }; - uart2: serial@48022000 { + uart1: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; @@ -151,7 +158,7 @@ status = "disabled"; }; - uart3: serial@48024000 { + uart2: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; @@ -160,7 +167,7 @@ status = "disabled"; }; - uart4: serial@481a6000 { + uart3: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; @@ -169,7 +176,7 @@ status = "disabled"; }; - uart5: serial@481a8000 { + uart4: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; @@ -178,7 +185,7 @@ status = "disabled"; }; - uart6: serial@481aa000 { + uart5: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; @@ -343,6 +350,90 @@ ti,hwmods = "usb_otg_hs"; }; + epwmss0: epwmss@48300000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + ecap0: ecap@48300100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48300100 0x80>; + ti,hwmods = "ecap0"; + status = "disabled"; + }; + + ehrpwm0: ehrpwm@48300200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48300200 0x80>; + ti,hwmods = "ehrpwm0"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48302000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + ti,hwmods = "epwmss1"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48302100 0x48302100 0x80 /* ECAP */ + 0x48302180 0x48302180 0x80 /* EQEP */ + 0x48302200 0x48302200 0x80>; /* EHRPWM */ + + ecap1: ecap@48302100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48302100 0x80>; + ti,hwmods = "ecap1"; + status = "disabled"; + }; + + ehrpwm1: ehrpwm@48302200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48302200 0x80>; + ti,hwmods = "ehrpwm1"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48304000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + ti,hwmods = "epwmss2"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48304100 0x48304100 0x80 /* ECAP */ + 0x48304180 0x48304180 0x80 /* EQEP */ + 0x48304200 0x48304200 0x80>; /* EHRPWM */ + + ecap2: ecap@48304100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48304100 0x80>; + ti,hwmods = "ecap2"; + status = "disabled"; + }; + + ehrpwm2: ehrpwm@48304200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48304200 0x80>; + ti,hwmods = "ehrpwm2"; + status = "disabled"; + }; + }; + mac: ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; @@ -403,6 +494,14 @@ ti,hwmods = "wkup_m3"; }; + elm: elm@48080000 { + compatible = "ti,am3352-elm"; + reg = <0x48080000 0x2000>; + interrupts = <4>; + ti,hwmods = "elm"; + status = "disabled"; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index e9b5bda..e99dfaf 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { model = "TI AM3517 EVM (AM3517/05)"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index 5568683..fdf5ce6 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { model = "TeeJet Mt.Ventoux"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi new file mode 100644 index 0000000..ddc1df7 --- /dev/null +++ b/arch/arm/boot/dts/am4372.dtsi @@ -0,0 +1,68 @@ +/* + * Device Tree Source for AM4372 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + compatible = "ti,am4372", "ti,am43"; + interrupt-parent = <&gic>; + + + aliases { + serial0 = &uart0; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + }; + + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@44e09000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x44e09000 0x2000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer1: timer@44e31000 { + compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms"; + reg = <0x44e31000 0x400>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48040000 0x400>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + + counter32k: counter@44e86000 { + compatible = "ti,am4372-counter32k","ti,omap-counter32k"; + reg = <0x44e86000 0x40>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts new file mode 100644 index 0000000..74174d4 --- /dev/null +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* AM43x EPOS EVM */ + +/dts-v1/; + +#include "am4372.dtsi" + +/ { + model = "TI AM43x EPOS EVM"; + compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 2353b1f..beee169 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -74,6 +74,7 @@ */ status = "disabled"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 14e36e1..45b1077 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -99,6 +99,7 @@ * No CD or WP GPIOs: SDIO interface used for * Wifi/Bluetooth chip */ + broken-cd; }; usb@50000 { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 130f839..a3a2fed 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,6 +64,7 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { @@ -84,6 +85,22 @@ gpios = <&gpio0 6 1>; }; }; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 52a1f5e..90b1176 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -22,9 +22,18 @@ model = "Marvell Armada 370 and XP SoC"; compatible = "marvell,armada-370-xp"; + aliases { + eth0 = ð0; + eth1 = ð1; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "marvell,sheeva-v7"; + device_type = "cpu"; + reg = <0>; }; }; @@ -94,7 +103,7 @@ reg = <0x72004 0x4>; }; - ethernet@70000 { + eth0: ethernet@70000 { compatible = "marvell,armada-370-neta"; reg = <0x70000 0x4000>; interrupts = <8>; @@ -102,7 +111,7 @@ status = "disabled"; }; - ethernet@74000 { + eth1: ethernet@74000 { compatible = "marvell,armada-370-neta"; reg = <0x74000 0x4000>; interrupts = <10>; @@ -143,6 +152,10 @@ reg = <0xd4000 0x200>; interrupts = <54>; clocks = <&gateclk 17>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index aee2b18..fa3dfc6 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -180,10 +180,6 @@ bus-range = <0x00 0xff>; - reg = <0x40000 0x2000>, <0x80000 0x2000>; - - reg-names = "pcie0.0", "pcie1.0"; - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index d6cc8bf..e28e68f 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -30,6 +30,10 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ + internal-regs { serial@12000 { clock-frequency = <250000000>; @@ -97,6 +101,7 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { @@ -155,6 +160,35 @@ status = "okay"; }; }; + + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x1000000>; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 76db557..c87b2de 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -105,6 +105,16 @@ phy-mode = "rgmii-id"; }; + /* Front-side USB slot */ + usb@50000 { + status = "okay"; + }; + + /* Back-side USB slot */ + usb@51000 { + status = "okay"; + }; + spi0: spi@10600 { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 488ca5e..c7b1f4d 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -23,6 +23,7 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + eth3 = ð3; }; @@ -105,7 +106,7 @@ interrupts = <91>; }; - ethernet@34000 { + eth3: ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x4000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index fdea75c..8f51045 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -138,13 +138,22 @@ nr-ports = <2>; status = "okay"; }; + + /* Front side USB 0 */ usb@50000 { status = "okay"; }; + + /* Front side USB 1 */ usb@51000 { status = "okay"; }; + /* USB interface in the mini-PCIe connector */ + usb@52000 { + status = "okay"; + }; + devbus-bootcs@10400 { status = "okay"; ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 1ee8540..416eb94 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -22,6 +22,10 @@ model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + aliases { + eth2 = ð2; + }; + soc { internal-regs { L2: l2-cache { @@ -86,7 +90,7 @@ reg = <0x18200 0x500>; }; - ethernet@30000 { + eth2: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; interrupts = <12>; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index 5ede767..cce45f5 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -21,6 +21,7 @@ serial3 = &usart2; serial4 = &usart3; serial5 = &uart0; + serial6 = &uart1; }; chosen { @@ -112,13 +113,17 @@ status = "okay"; }; + /* + * UART0/1 pins are marked as GPIO on + * Aria documentation. + * Change to "okay" if you need additional serial ports + */ uart0: serial@f8040000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf8040000 0x200>; - interrupts = <15 4 5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; + status = "disabled"; + }; + + uart1: serial@f8044000 { + status = "disabled"; }; adc0: adc@f804c000 { @@ -138,6 +143,10 @@ }; }; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts new file mode 100644 index 0000000..cbe9673 --- /dev/null +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -0,0 +1,157 @@ +/* + * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board + * + * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC) + * + * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Acme Systems FoxG20"; + compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + >; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + + uart0: serial@fffd4000 { + status = "okay"; + }; + + uart1: serial@fffd8000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */ + }; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + i2c-gpio,delay-us = <5>; /* ~85 kHz */ + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + /* red LED marked "PC7" near mini USB (device) receptacle */ + user_led { + label = "user_led"; + gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn { + label = "Button"; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 4aad0d9..92b9e21 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -38,8 +38,12 @@ ssc2 = &ssc2; }; cpus { - cpu@0 { + #address-cells = <0>; + #size-cells = <0>; + + cpu { compatible = "arm,arm920t"; + device_type = "cpu"; }; }; @@ -398,6 +402,91 @@ }; }; + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -498,6 +587,17 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; + + spi0: spi@fffe0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffe0000 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 1405812..d2d72c3 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -53,6 +53,16 @@ atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; status = "okay"; }; + + spi0: spi@fffe0000 { + status = "okay"; + cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + }; }; usb0: ohci@00300000 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 44851b9..c7ccbcb 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -35,8 +35,12 @@ ssc0 = &ssc0; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -347,6 +351,90 @@ }; }; + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE + AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -599,6 +687,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d9cf51a..d5bd65f 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -32,8 +32,12 @@ ssc1 = &ssc1; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -324,6 +328,44 @@ }; }; + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index eff1afb..70f835b 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -89,6 +89,10 @@ reg = <0>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index c7ffc32..1373546 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -104,6 +104,10 @@ reg = <1>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index f0091af..c3e5148 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -10,6 +10,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -38,8 +39,12 @@ ssc1 = &ssc1; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -344,6 +349,82 @@ }; }; + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -537,7 +618,7 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma 1 0>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -548,7 +629,7 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma 1 13>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -582,6 +663,68 @@ pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + usb2: gadget@fff78000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x80000 + 0xfff78000 0x400>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 89c50d1..a4b00e5 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -59,6 +59,10 @@ status = "okay"; }; + watchdog@fffffd40 { + status = "okay"; + }; + mmc0: mmc@fff80000 { pinctrl-0 = < &pinctrl_board_mmc0 @@ -112,6 +116,11 @@ reg = <0>; }; }; + + usb2: gadget@fff78000 { + atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index d864f7a..bb7f564 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -8,6 +8,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -34,8 +35,12 @@ ssc0 = &ssc0; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -93,7 +98,7 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma 1 0>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -286,6 +291,82 @@ }; }; + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -385,8 +466,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma 1 13>, - <&dma 1 14>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>, + <&dma 1 AT91_DMA_CFG_PER_ID(14)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -397,8 +478,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma 1 15>, - <&dma 1 16>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>, + <&dma 1 AT91_DMA_CFG_PER_ID(16)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -411,6 +492,9 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -422,10 +506,19 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>, + <&dma 1 AT91_DMA_CFG_PER_ID(4)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 2e67cd5..d59b70c 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -77,6 +77,10 @@ reg = <0>; }; }; + + watchdog@fffffe40 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index af91599..57d45f5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -10,6 +10,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -36,8 +37,12 @@ ssc0 = &ssc0; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -414,6 +419,82 @@ }; }; + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -470,7 +551,7 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 1 0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -481,7 +562,7 @@ compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma1 1 0>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -544,8 +625,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma0 1 7>, - <&dma0 1 8>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -558,8 +639,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma1 1 5>, - <&dma1 1 6>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(6)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -572,8 +653,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma0 1 9>, - <&dma0 1 10>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -582,6 +663,24 @@ status = "disabled"; }; + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + uart1: serial@f8044000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8044000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; @@ -629,6 +728,9 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -640,13 +742,84 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + usb2: gadget@f803c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00500000 0x80000 + 0xf803c000 0x400>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; + rtc@fffffeb0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 19c8ebb..b753855 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -52,6 +52,11 @@ status = "okay"; }; + usb2: gadget@f803c000 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + i2c0: i2c@f8010000 { status = "okay"; }; @@ -81,6 +86,10 @@ reg = <0>; }; }; + + watchdog@fffffe40 { + status = "okay"; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 248067c..67ec524 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -13,7 +13,7 @@ /dts-v1/; -/include/ "bcm11351.dtsi" +#include "bcm11351.dtsi" / { model = "BCM11351 BRT board"; @@ -27,4 +27,21 @@ status = "okay"; }; + sdio0: sdio@0x3f180000 { + max-frequency = <48000000>; + status = "okay"; + }; + + sdio1: sdio@0x3f190000 { + non-removable; + max-frequency = <48000000>; + status = "okay"; + }; + + sdio3: sdio@0x3f1b0000 { + max-frequency = <48000000>; + status = "okay"; + }; + + }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 41b2c6c..17979d5 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -11,7 +11,10 @@ * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "skeleton.dtsi" / { model = "BCM11351 SoC"; @@ -33,7 +36,7 @@ smc@0x3404c000 { compatible = "bcm,bcm11351-smc", "bcm,kona-smc"; - reg = <0x3404c000 0x400>; //1 KiB in SRAM + reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ }; uart@3e000000 { @@ -41,7 +44,7 @@ status = "disabled"; reg = <0x3e000000 0x1000>; clock-frequency = <13000000>; - interrupts = <0x0 67 0x4>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; }; @@ -56,8 +59,36 @@ timer@35006000 { compatible = "bcm,kona-timer"; reg = <0x35006000 0x1000>; - interrupts = <0x0 7 0x4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <32768>; }; + sdio0: sdio@0x3f180000 { + compatible = "bcm,kona-sdhci"; + reg = <0x3f180000 0x10000>; + interrupts = <0x0 77 0x4>; + status = "disabled"; + }; + + sdio1: sdio@0x3f190000 { + compatible = "bcm,kona-sdhci"; + reg = <0x3f190000 0x10000>; + interrupts = <0x0 76 0x4>; + status = "disabled"; + }; + + sdio2: sdio@0x3f1a0000 { + compatible = "bcm,kona-sdhci"; + reg = <0x3f1a0000 0x10000>; + interrupts = <0x0 74 0x4>; + status = "disabled"; + }; + + sdio3: sdio@0x3f1b0000 { + compatible = "bcm,kona-sdhci"; + reg = <0x3f1b0000 0x10000>; + interrupts = <0x0 73 0x4>; + status = "disabled"; + }; + }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index aafda17..6e9deb7 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -8,6 +8,17 @@ memory { reg = <0 0x10000000>; }; + + leds { + compatible = "gpio-leds"; + + act { + label = "ACT"; + gpios = <&gpio 16 1>; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + }; }; &gpio { diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts new file mode 100644 index 0000000..48ff034 --- /dev/null +++ b/arch/arm/boot/dts/ccu8540.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2013 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson U8540 platform with Device Tree"; + compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + + memory@0 { + reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; + }; + + soc { + prcmu@80157000 { + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; + }; + + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts index 0430546..ed29ec7 100644 --- a/arch/arm/boot/dts/ccu9540.dts +++ b/arch/arm/boot/dts/ccu9540.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" +#include "dbx5x0.dtsi" / { model = "ST-Ericsson CCU9540 platform with Device Tree"; @@ -20,7 +20,7 @@ reg = <0x00000000 0x20000000>; }; - soc-u9500 { + soc { uart@80120000 { status = "okay"; }; @@ -52,7 +52,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index b6bc4ff..a082f0b 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include "skeleton.dtsi" / { - soc-u9500 { + soc { #address-cells = <1>; #size-cells = <1>; compatible = "stericsson,db8500"; @@ -31,33 +32,33 @@ L2: l2-cache { compatible = "arm,pl310-cache"; reg = <0xa0412000 0x1000>; - interrupts = <0 13 4>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; }; pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 7 0x4>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; timer@a0410600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xa0410600 0x20>; - interrupts = <1 13 0x304>; + interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ }; rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; - interrupts = <0 18 0x4>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; }; gpio0: gpio@8012e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8012e000 0x80>; - interrupts = <0 119 0x4>; + interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -70,7 +71,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8012e080 0x80>; - interrupts = <0 120 0x4>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -83,7 +84,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e000 0x80>; - interrupts = <0 121 0x4>; + interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -96,7 +97,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e080 0x80>; - interrupts = <0 122 0x4>; + interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -109,7 +110,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e100 0x80>; - interrupts = <0 123 0x4>; + interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -122,7 +123,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e180 0x80>; - interrupts = <0 124 0x4>; + interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -135,7 +136,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8011e000 0x80>; - interrupts = <0 125 0x4>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -148,7 +149,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8011e080 0x80>; - interrupts = <0 126 0x4>; + interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -161,7 +162,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0xa03fe000 0x80>; - interrupts = <0 127 0x4>; + interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -171,29 +172,61 @@ }; pinctrl { - compatible = "stericsson,nmk-pinctrl"; + compatible = "stericsson,db8500-pinctrl"; prcm = <&prcmu>; }; - usb@a03e0000 { + usb_per5@a03e0000 { compatible = "stericsson,db8500-musb", "mentor,musb"; reg = <0xa03e0000 0x10000>; - interrupts = <0 23 0x4>; - }; - - dma-controller@801C0000 { - compatible = "stericsson,db8500-dma40", - "stericsson,dma40"; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + + dr_mode = "otg"; + + dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ + <&dma 38 0 0x0>, /* Logical - MemToDev */ + <&dma 37 0 0x2>, /* Logical - DevToMem */ + <&dma 37 0 0x0>, /* Logical - MemToDev */ + <&dma 36 0 0x2>, /* Logical - DevToMem */ + <&dma 36 0 0x0>, /* Logical - MemToDev */ + <&dma 19 0 0x2>, /* Logical - DevToMem */ + <&dma 19 0 0x0>, /* Logical - MemToDev */ + <&dma 18 0 0x2>, /* Logical - DevToMem */ + <&dma 18 0 0x0>, /* Logical - MemToDev */ + <&dma 17 0 0x2>, /* Logical - DevToMem */ + <&dma 17 0 0x0>, /* Logical - MemToDev */ + <&dma 16 0 0x2>, /* Logical - DevToMem */ + <&dma 16 0 0x0>, /* Logical - MemToDev */ + <&dma 39 0 0x2>, /* Logical - DevToMem */ + <&dma 39 0 0x0>; /* Logical - MemToDev */ + + dma-names = "iep_1_9", "oep_1_9", + "iep_2_10", "oep_2_10", + "iep_3_11", "oep_3_11", + "iep_4_12", "oep_4_12", + "iep_5_13", "oep_5_13", + "iep_6_14", "oep_6_14", + "iep_7_15", "oep_7_15", + "iep_8", "oep_8"; + }; + + dma: dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", "stericsson,dma40"; reg = <0x801C0000 0x1000 0x40010000 0x800>; - interrupts = <0 25 0x4>; + reg-names = "base", "lcpa"; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + + #dma-cells = <3>; + memcpy-channels = <56 57 58 59 60>; }; prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; - interrupts = <0 47 0x4>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; interrupt-controller; @@ -208,7 +241,8 @@ thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; - interrupts = <21 0x4>, <22 0x4>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; status = "disabled"; }; @@ -322,21 +356,21 @@ ab8500 { compatible = "stericsson,ab8500"; interrupt-parent = <&intc>; - interrupts = <0 40 0x4>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; ab8500-rtc { compatible = "stericsson,ab8500-rtc"; - interrupts = <17 0x4 - 18 0x4>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH + 18 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "60S", "ALARM"; }; ab8500-gpadc { compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 0x4 - 39 0x4>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH + 39 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "HW_CONV_END", "SW_CONV_END"; vddadc-supply = <&ab8500_ldo_tvout_reg>; }; @@ -369,13 +403,13 @@ ab8500_usb { compatible = "stericsson,ab8500-usb"; - interrupts = < 90 0x4 - 96 0x4 - 14 0x4 - 15 0x4 - 79 0x4 - 74 0x4 - 75 0x4>; + interrupts = < 90 IRQ_TYPE_LEVEL_HIGH + 96 IRQ_TYPE_LEVEL_HIGH + 14 IRQ_TYPE_LEVEL_HIGH + 15 IRQ_TYPE_LEVEL_HIGH + 79 IRQ_TYPE_LEVEL_HIGH + 74 IRQ_TYPE_LEVEL_HIGH + 75 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ID_WAKEUP_R", "ID_WAKEUP_F", "VBUS_DET_F", @@ -383,15 +417,15 @@ "USB_LINK_STATUS", "USB_ADP_PROBE_PLUG", "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; v-ape-supply = <&db8500_vape_reg>; musb_1v8-supply = <&db8500_vsmps2_reg>; }; ab8500-ponkey { compatible = "stericsson,ab8500-poweron-key"; - interrupts = <6 0x4 - 7 0x4>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH + 7 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; }; @@ -410,6 +444,11 @@ codec: ab8500-codec { compatible = "stericsson,ab8500-codec"; + V-AUD-supply = <&ab8500_ldo_audio_reg>; + V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>; + V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; + V-DMIC-supply = <&ab8500_ldo_dmic_reg>; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; @@ -441,8 +480,8 @@ }; // supply for v-intcore12; VINTCORE12 LDO - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { - regulator-compatible = "ab8500_ldo_initcore"; + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-compatible = "ab8500_ldo_intcore"; }; // supply for tvout; gpadc; TVOUT LDO @@ -460,14 +499,14 @@ regulator-compatible = "ab8500_ldo_audio"; }; - // supply for v-anamic1 VAMic1-LDO + // supply for v-anamic1 VAMIC1 LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { regulator-compatible = "ab8500_ldo_anamic1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { - regulator-compatible = "ab8500_ldo_amamic2"; + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-compatible = "ab8500_ldo_anamic2"; }; // supply for v-dmic; VDMIC LDO @@ -486,7 +525,7 @@ i2c@80004000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; - interrupts = <0 21 0x4>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -499,7 +538,7 @@ i2c@80122000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; - interrupts = <0 22 0x4>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -512,7 +551,7 @@ i2c@80128000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; - interrupts = <0 55 0x4>; + interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -525,7 +564,7 @@ i2c@80110000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; - interrupts = <0 12 0x4>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -538,7 +577,7 @@ i2c@8012a000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; - interrupts = <0 51 0x4>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -551,82 +590,114 @@ ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; - interrupts = <0 14 0x4>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; - - // Add one of these for each child device - cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 - &gpio6 22 0x4 &gpio7 0 0x4>; - }; uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; - interrupts = <0 11 0x4>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */ + <&dma 13 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; + uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; - interrupts = <0 19 0x4>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */ + <&dma 12 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; + uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; - interrupts = <0 26 0x4>; + interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */ + <&dma 11 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; - interrupts = <0 60 0x4>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ + <&dma 29 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; - interrupts = <0 50 0x4>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */ + <&dma 32 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; - interrupts = <0 41 0x4>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */ + <&dma 28 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; - interrupts = <0 59 0x4>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; - interrupts = <0 99 0x4>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */ + <&dma 42 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; - interrupts = <0 100 0x4>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; msp0: msp@80123000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80123000 0x1000>; - interrupts = <0 31 0x4>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -634,7 +705,7 @@ msp1: msp@80124000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80124000 0x1000>; - interrupts = <0 62 0x4>; + interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -643,7 +714,7 @@ msp2: msp@80117000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80117000 0x1000>; - interrupts = <0 98 0x4>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -651,7 +722,7 @@ msp3: msp@80125000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80125000 0x1000>; - interrupts = <0 62 0x4>; + interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -686,5 +757,20 @@ status = "disabled"; }; + + cryp@a03cb000 { + compatible = "stericsson,ux500-cryp"; + reg = <0xa03cb000 0x1000>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + + v-ape-supply = <&db8500_vape_reg>; + }; + + hash@a03c2000 { + compatible = "stericsson,ux500-hash"; + reg = <0xa03c2000 0x1000>; + + v-ape-supply = <&db8500_vape_reg>; + }; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 7e3065a..5cae2ab 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -44,11 +44,60 @@ gpio = <&gpio0 1 0>; }; }; + + clocks { + /* 25MHz reference crystal */ + ref25: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; }; &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; -&i2c0 { status = "okay"; }; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + + si5351: clock-generator { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* connect xtal input to 25MHz reference */ + clocks = <&ref25>; + + /* connect xtal input as source of pll0 and pll1 */ + silabs,pll-source = <0 0>, <1 0>; + + clkout0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + }; + + clkout1 { + reg = <1>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + silabs,pll-master; + }; + + clkout2 { + reg = <2>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + }; + }; +}; &sdio0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 359694c..bed40ee 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -160,6 +160,8 @@ reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 170>, <&clock 273>; + clock-names = "sclk_mfc", "mfc"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 524b908..08609b8 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -41,6 +41,10 @@ enable-active-high; }; + tmu@100C0000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; @@ -83,6 +87,150 @@ status = "okay"; }; + i2c@13860000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -143,4 +291,25 @@ clock-frequency = <24000000>; }; }; + + fimd@11c00000 { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 55a2efb..553bcea 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -330,6 +330,95 @@ samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_en: lcd-en { + samsung,pins = "gpe3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@11000000 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 54710de..d4f8067 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -112,12 +112,17 @@ interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; }; g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 53bc8bf..867d945 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -43,6 +43,7 @@ #size-cells = <0>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; status = "okay"; num-slots = <1>; @@ -78,6 +79,7 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; status = "okay"; }; @@ -108,4 +110,199 @@ clock-frequency = <24000000>; }; }; + + i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: pmic@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 1c21bad..ca73c42 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -36,6 +36,72 @@ enable-active-high; }; + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <2>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_home { + keypad,row = <0>; + keypad,column = <0>; + linux,code = <102>; + }; + + key_down { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <108>; + }; + + key_up { + keypad,row = <1>; + keypad,column = <0>; + linux,code = <103>; + }; + + key_menu { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <139>; + }; + + key_back { + keypad,row = <2>; + keypad,column = <0>; + linux,code = <158>; + }; + + key_enter { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <28>; + }; + }; + + g2d@10800000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index dd56431..a8ba195 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -31,8 +31,91 @@ status = "okay"; }; - g2d@10800000 { + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; + }; + + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; + }; + + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; + }; + + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; + }; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 099cec7..704290f 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -778,62 +778,6 @@ samsung,pin-drv = <3>; }; - keypad_col0: keypad-col0 { - samsung,pins = "gpl2-0"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col1: keypad-col1 { - samsung,pins = "gpl2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col2: keypad-col2 { - samsung,pins = "gpl2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col3: keypad-col3 { - samsung,pins = "gpl2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col4: keypad-col4 { - samsung,pins = "gpl2-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col5: keypad-col5 { - samsung,pins = "gpl2-5"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col6: keypad-col6 { - samsung,pins = "gpl2-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col7: keypad-col7 { - samsung,pins = "gpl2-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - cam_port_b: cam-port-b { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index e3380a7..35cb209 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -28,14 +28,6 @@ pinctrl3 = &pinctrl_3; }; - combiner:interrupt-controller@10440000 { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; - }; - clock: clock-controller@0x10030000 { compatible = "samsung,exynos4412-clock"; reg = <0x10030000 0x20000>; @@ -77,6 +69,8 @@ compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 02cfc76..c6db281 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -449,4 +449,35 @@ clock-frequency = <24000000>; }; }; + + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; + + fimd: fimd@14400000 { + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; + }; + + rtc { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index ded558b..724a22f 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -553,6 +553,13 @@ samsung,pin-pud = <0>; samaung,pin-drv = <0>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; }; pinctrl@13400000 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 3e0c792..1e21200 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -37,6 +37,30 @@ }; }; + vdd:fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + dbvdd:fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + spkvdd:fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; @@ -47,8 +71,17 @@ }; wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; }; @@ -224,6 +257,9 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; }; display-timings { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index d449feb..05244f1 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -171,6 +171,10 @@ }; }; + rtc { + status = "okay"; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index fc9fb3d..54a35e6 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -479,6 +479,36 @@ pinctrl-0 = <&i2s2_bus>; }; + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 286>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + usb-phy = <&usb2_phy &usb3_phy>; + }; + }; + + usb3_phy: usbphy@12100000 { + compatible = "samsung,exynos5250-usb3phy"; + reg = <0x12100000 0x100>; + clocks = <&clock 1>, <&clock 286>; + clock-names = "ext_xtal", "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>; + }; + }; + usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; @@ -497,7 +527,7 @@ clock-names = "usbhost"; }; - usbphy@12130000 { + usb2_phy: usbphy@12130000 { compatible = "samsung,exynos5250-usb2phy"; reg = <0x12130000 0x100>; clocks = <&clock 1>, <&clock 285>; @@ -621,6 +651,8 @@ reg = <0x145b0000 0x1000>; interrupts = <10 3>; interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index ef747b5..f722a02 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -17,7 +17,7 @@ compatible = "samsung,sd5v1", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index f96de39..ba88cfd 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -17,11 +17,46 @@ compatible = "samsung,ssdk5440", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; - spi { - status = "disabled"; + spi_0: spi@D0000 { + + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; + + partition@00000 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + + partition@e0000 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; + }; + + partition@3e0000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; + + partition@ae0000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; + }; + + }; + }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index b7ffc4d..bfcb907 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -16,6 +16,10 @@ interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + }; + clock: clock-controller@0x160000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x1000>; @@ -38,18 +42,22 @@ #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; }; cpu@2 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <2>; }; cpu@3 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <3>; }; @@ -79,8 +87,13 @@ interrupts = <0 57 0>; operating-points = < /* KHz uV */ + 1500000 1100000 + 1400000 1075000 + 1300000 1050000 1200000 1025000 + 1100000 1000000 1000000 975000 + 900000 950000 800000 925000 >; }; @@ -101,14 +114,14 @@ clock-names = "uart", "clk_uart_baud0"; }; - spi { - compatible = "samsung,exynos4210-spi"; - reg = <0xD0000 0x1000>; + spi_0: spi@D0000 { + compatible = "samsung,exynos5440-spi"; + reg = <0xD0000 0x100>; interrupts = <0 4 0>; - tx-dma-channel = <&pdma0 5>; /* preliminary */ - rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; clocks = <&clock 21>, <&clock 16>; clock-names = "spi", "spi_busclk0"; }; @@ -184,28 +197,6 @@ compatible = "arm,amba-bus"; interrupt-parent = <&gic>; ranges; - - pdma0: pdma@00121000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121000 0x1000>; - interrupts = <0 46 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@00120000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <0 47 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; }; rtc { @@ -214,7 +205,30 @@ interrupts = <0 17 0>, <0 16 0>; clocks = <&clock 21>; clock-names = "rtc"; - status = "disabled"; + }; + + sata@210000 { + compatible = "snps,exynos5440-ahci"; + reg = <0x210000 0x10000>; + interrupts = <0 30 0>; + clocks = <&clock 23>; + clock-names = "sata"; + }; + + ohci@220000 { + compatible = "samsung,exynos5440-ohci"; + reg = <0x220000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; + }; + + ehci@221000 { + compatible = "samsung,exynos5440-ehci"; + reg = <0x221000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; }; pcie@290000 { diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index c0bc426..9db41b9 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "dbx5x0.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include "dbx5x0.dtsi" / { memory { @@ -27,7 +28,7 @@ }; }; - soc-u9500 { + soc { uart@80120000 { status = "okay"; }; @@ -45,14 +46,14 @@ compatible = "tc3589x"; reg = <0x42>; interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; tc3589x_gpio: tc3589x_gpio { compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -63,17 +64,43 @@ }; i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; + lp5521@33 { + compatible = "national,lp5521"; reg = <0x33>; + label = "lp5521_pri"; + clock-mode = /bits/ 8 <2>; + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; }; - - lp5521@0x34 { - compatible = "lp5521"; + lp5521@34 { + compatible = "national,lp5521"; reg = <0x34>; + label = "lp5521_sec"; + clock-mode = /bits/ 8 <2>; + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; }; - - bh1780@0x29 { + bh1780@29 { compatible = "rohm,bh1780gli"; reg = <0x33>; }; @@ -82,7 +109,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -97,7 +124,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -106,7 +133,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -116,7 +143,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -236,7 +263,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -256,7 +283,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index c2d2748..c6bb07d 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" -/include/ "href.dtsi" -/include/ "stuib.dtsi" +#include "dbx5x0.dtsi" +#include "href.dtsi" +#include "stuib.dtsi" / { model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; @@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc { prcmu@80157000 { ab8500@5 { ab8500-gpio { @@ -41,7 +41,7 @@ }; i2c@80110000 { - bu21013_tp@0x5c { + bu21013_tp@5c { reset-gpio = <&tc3589x_gpio 13 0x4>; }; }; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 2b587a7..3d580d6 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" -/include/ "href.dtsi" -/include/ "stuib.dtsi" +#include "dbx5x0.dtsi" +#include "href.dtsi" +#include "stuib.dtsi" / { model = "ST-Ericsson HREF (v60+) platform with Device Tree"; @@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc { i2c@80110000 { bu21013_tp@0x5c { reset-gpio = <&gpio4 15 0x4>; @@ -34,7 +34,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -48,7 +48,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -57,7 +57,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -67,7 +67,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -172,7 +172,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -192,7 +192,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 73fd7d0..587ceef 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -23,8 +23,12 @@ }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts new file mode 100644 index 0000000..e7ed978 --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -0,0 +1,37 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx27-phytec-phycore-som.dts" + +/ { + model = "Phytec pcm970"; + compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; +}; + +&cspi1 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gpio3 29 0>; + wp-gpios = <&gpio3 28 0>; + vmmc-supply = <&vmmc1_reg>; + status = "okay"; +}; + +&uart1 { + fsl,uart-has-rtscts; +}; + +&uart2 { + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts new file mode 100644 index 0000000..f010565 --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts @@ -0,0 +1,179 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx27.dtsi" + +/ { + model = "Phytec pcm038"; + compatible = "phytec,imx27-pcm038", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi1 */ + serial@1000a000 { + status = "okay"; + }; + + i2c@1001d000 { + clock-frequency = <400000>; + status = "okay"; + at24@52 { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + lm75@4a { + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + }; + + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { + phy-reset-gpios = <&gpio3 30 0>; + status = "okay"; + }; + }; + }; + + nor_flash@c0000000 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0xc0000000 0x02000000>; + linux,mtd-name = "physmap-flash.0"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&cspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 28 0>; + status = "okay"; + + pmic: mc13783@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13783"; + spi-max-frequency = <20000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <23 0x4>; + fsl,mc13xxx-uses-adc; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + sw1b_reg: sw1b { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2a_reg: sw2a { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2b_reg: sw2b { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vaudio_reg: vaudio { + regulator-always-on; + regulator-boot-on; + }; + + violo_reg: violo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + viohi_reg: viohi { + regulator-always-on; + regulator-boot-on; + }; + + vgen_reg: vgen { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vrf1_reg: vrf1 { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vrf2_reg: vrf2 { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc1_reg: vmmc1 { + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + }; + + gpo1_reg: gpo1 { }; + + pwgt1spi_reg: pwgt1spi { + regulator-always-on; + }; + }; + }; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts deleted file mode 100644 index fe64e3a..0000000 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx27.dtsi" - -/ { - model = "Phytec pcm038"; - compatible = "phytec,imx27-pcm038", "fsl,imx27"; - - memory { - reg = <0x0 0x0>; - }; - - soc { - aipi@10000000 { /* aipi1 */ - serial@1000a000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - - serial@1000b000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - - serial@1000c000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - - i2c@1001d000 { - clock-frequency = <400000>; - status = "okay"; - at24@52 { - compatible = "at,24c32"; - pagesize = <32>; - reg = <0x52>; - }; - pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - lm75@4a { - compatible = "national,lm75"; - reg = <0x4a>; - }; - }; - }; - - aipi@10020000 { /* aipi2 */ - ethernet@1002b000 { - status = "okay"; - }; - }; - }; - - nor_flash@c0000000 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0xc0000000 0x02000000>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&nfc { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 75bd113..0695264 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -25,6 +25,9 @@ gpio3 = &gpio4; gpio4 = &gpio5; gpio5 = &gpio6; + spi0 = &cspi1; + spi1 = &cspi2; + spi2 = &cspi3; }; avic: avic-interrupt-controller@e0000000 { @@ -58,6 +61,16 @@ reg = <0x10000000 0x20000>; ranges; + dma: dma@10001000 { + compatible = "fsl,imx27-dma"; + reg = <0x10001000 0x1000>; + interrupts = <32>; + clocks = <&clks 50>, <&clks 70>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + #dma-channels = <16>; + }; + wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; @@ -89,6 +102,14 @@ clock-names = "ipg", "per"; }; + pwm0: pwm@10006000 { + compatible = "fsl,imx27-pwm"; + reg = <0x10006000 0x1000>; + interrupts = <23>; + clocks = <&clks 34>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; @@ -157,6 +178,28 @@ status = "disabled"; }; + sdhci1: sdhci@10013000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10013000 0x1000>; + interrupts = <11>; + clocks = <&clks 30>, <&clks 60>; + clock-names = "ipg", "per"; + dmas = <&dma 7>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: sdhci@10014000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10014000 0x1000>; + interrupts = <10>; + clocks = <&clks 29>, <&clks 60>; + clock-names = "ipg", "per"; + dmas = <&dma 6>; + dma-names = "rx-tx"; + status = "disabled"; + }; + gpio1: gpio@10015000 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015000 0x100>; @@ -272,6 +315,17 @@ status = "disabled"; }; + sdhci3: sdhci@1001e000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x1001e000 0x1000>; + interrupts = <9>; + clocks = <&clks 28>, <&clks 60>; + clock-names = "ipg", "per"; + dmas = <&dma 36>; + dma-names = "rx-tx"; + status = "disabled"; + }; + gpt6: timer@1001f000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001f000 0x1000>; @@ -288,6 +342,21 @@ reg = <0x10020000 0x20000>; ranges; + coda: coda@10023000 { + compatible = "fsl,imx27-vpu"; + reg = <0x10023000 0x0200>; + interrupts = <53>; + clocks = <&clks 57>, <&clks 66>; + clock-names = "per", "ahb"; + iram = <&iram>; + }; + + clks: ccm@10027000{ + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + #clock-cells = <1>; + }; + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; @@ -296,19 +365,16 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; - - clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; - }; }; + iram: iram@ffff4c00 { + compatible = "mmio-sram"; + reg = <0xffff4c00 0xb400>; + }; nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 3d905d1..b602494 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -103,6 +103,7 @@ apbx@80040000 { lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 1594694..94c4476 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -45,6 +45,17 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; ssp0: ssp@80010000 { @@ -58,12 +69,6 @@ }; apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_b>; @@ -73,15 +78,30 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; status = "okay"; - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; reg = <0x3c>; - pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7 0>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; }; }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 063e620..04b2f76 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -33,7 +33,7 @@ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ - 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -166,8 +166,8 @@ apbx@80040000 { pwm: pwm@80064000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&pwm3_pins_b>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; status = "okay"; }; @@ -265,7 +265,7 @@ gpio-sck = <&gpio2 16 0>; gpio-mosi = <&gpio2 17 0>; gpio-miso = <&gpio2 18 0>; - cs-gpios = <&gpio3 23 0>; + cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts new file mode 100644 index 0000000..1581112 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -0,0 +1,179 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10055 is an expansion board for the CFA-10036 module and + * CFA-10037, thus we need to include the CFA-10037 DTS. + */ +/include/ "imx28-cfa10037.dts" + +/ { + model = "Crystalfontz CFA-10055 Board"; + compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10055 + &hog_pins_cfa10055_pullup>; + + hog_pins_cfa10055: hog-10055@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + hog_pins_cfa10055_pullup: hog-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + spi2_pins_cfa10055: spi2-cfa10055@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10055: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10055 + &lcdif_pins_cfa10055>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + }; + }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_cfa10055>; + status = "okay"; + gpio-sck = <&gpio2 16 0>; + gpio-mosi = <&gpio2 17 0>; + gpio-miso = <&gpio2 18 0>; + cs-gpios = <&gpio3 5 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hx8357: hx8357@0 { + compatible = "himax,hx8357b", "himax,hx8357"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + gpios-reset = <&gpio3 30 0>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts new file mode 100644 index 0000000..2da713cd --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -0,0 +1,191 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10057 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10057 Board"; + compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10057 + &hog_pins_cfa10057_pullup>; + + hog_pins_cfa10057: hog-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + hog_pins_cfa10057_pullup: hog-10057-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + + i2c1: i2c@8005a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 5aa44e0..880df2f 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -220,7 +220,19 @@ auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; + }; + + auart2: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_b>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 600f7cb..195451b 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -32,8 +32,12 @@ }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -330,6 +334,17 @@ fsl,pull-up = <0>; }; + auart2_2pins_b: auart2-2pins@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */ + 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + auart3_pins_a: auart3@0 { reg = <0>; fsl,pinmux-ids = < @@ -354,6 +369,28 @@ fsl,pull-up = <0>; }; + auart3_2pins_b: auart3-2pins@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ + 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart4_2pins_a: auart4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */ + 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < @@ -669,7 +706,7 @@ }; digctl@8001c000 { - compatible = "fsl,imx28-digctl"; + compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 2bcf698..8f7f9ac 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -45,6 +45,13 @@ status = "okay"; }; +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_2>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53fdde6..25764b5 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -175,10 +175,20 @@ }; }; + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks 124>; + clock-names = "main_clk"; + status = "okay"; + }; + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; interrupts = <18>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -186,6 +196,8 @@ compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80200 0x0200>; interrupts = <14>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -193,6 +205,8 @@ compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80400 0x0200>; interrupts = <16>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -200,9 +214,18 @@ compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80600 0x0200>; interrupts = <17>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@73f80800 { + #index-cells = <1>; + compatible = "fsl,imx51-usbmisc"; + reg = <0x73f80800 0x200>; + clocks = <&clks 108>; + }; + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts new file mode 100644 index 0000000..7d304d0 --- /dev/null +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -0,0 +1,259 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx53.dtsi" + +/ { + model = "DENX M53EVK"; + compatible = "denx,imx53-m53evk", "fsl,imx53"; + + memory { + reg = <0x70000000 0x20000000>; + }; + + soc { + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; + }; + }; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 3000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio>; + + user1 { + label = "user1"; + gpios = <&gpio2 8 0>; + linux,default-trigger = "heartbeat"; + }; + + user2 { + label = "user2"; + gpios = <&gpio2 9 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx53-m53evk-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-m53evk-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; + mux-int-port = <2>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_1>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio1 1 0>; + wp-gpios = <&gpio1 9 0>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; + clocks = <&clks 150>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + clock-frequency = <400000>; + status = "okay"; + + stmpe610@41 { + compatible = "st,stmpe610"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + id = <0>; + blocks = <0x5>; + interrupts = <6 0x0>; + interrupt-parent = <&gpio7>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "stmpe,ts"; + reg = <0>; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <3>; + ts,touch-det-delay = <3>; + ts,settling = <4>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 + + >; + }; + + led_pin_gpio: led_gpio@0 { + fsl,pins = < + MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 + MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 + >; + }; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_1>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_1>; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 445a011..aaa33bc 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -16,27 +16,81 @@ / { model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; + + reg_backlight: fixed@0 { + compatible = "regulator-fixed"; + regulator-name = "lcd-supply"; + gpio = <&gpio2 5 0>; + startup-delay-us = <5000>; + enable-active-low; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000 0 0>; + brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>; + default-brightness-level = <10>; + enable-gpios = <&gpio7 7 0>; + power-supply = <®_backlight>; + }; + + disp1: display@disp1 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp1_1>; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb24"; + status = "disabled"; + }; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + sound { + compatible = "tq,imx53-mba53-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-mba53-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <5>; + }; +}; + +&ldb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1_1>; + status = "disabled"; }; &iomuxc { lvds1 { pinctrl_lvds1_1: lvds1-grp1 { fsl,pins = < - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x10000 - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x10000 - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x10000 - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x10000 - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x10000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 >; }; pinctrl_lvds1_2: lvds1-grp2 { fsl,pins = < - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x10000 - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x10000 - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x10000 - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x10000 - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x10000 + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 >; }; }; @@ -44,33 +98,44 @@ disp1 { pinctrl_disp1_1: disp1-grp1 { fsl,pins = < - MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x10000 /* DISP1_DRDY */ - MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x10000 /* DISP1_HSYNC */ - MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x10000 /* DISP1_VSYNC */ - MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x10000 - MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x10000 - MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x10000 - MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x10000 - MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x10000 - MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x10000 - MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x10000 - MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x10000 - MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x10000 - MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x10000 - MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x10000 - MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x10000 - MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x10000 - MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x10000 - MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x10000 - MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x10000 - MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x10000 - MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x10000 - MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x10000 - MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x10000 - MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x10000 - MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x10000 - MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x10000 - MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x10000 + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */ + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */ + MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */ + MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */ + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000 + >; + }; + }; + + tve { + pinctrl_vga_sync_1: vgasync-grp1 { + fsl,pins = < + /* VGA_VSYNC, HSYNC with max drive strength */ + MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6 + MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6 >; }; }; @@ -80,16 +145,27 @@ status = "okay"; }; +&audmux { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; +}; + &i2c2 { codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clocks = <&clks 150>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; }; expander: pca9554@20 { compatible = "pca9554"; reg = <0x20>; interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; }; sensor2: lm75@49 { @@ -99,6 +175,7 @@ }; &fec { + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; @@ -114,10 +191,24 @@ status = "okay"; }; +&usbotg { + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + &uart1 { status = "okay"; }; +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &uart2 { status = "okay"; }; @@ -133,3 +224,13 @@ &i2c3 { status = "okay"; }; + +&tve { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vga_sync_1>; + ddc = <&i2c3>; + fsl,tve-mode = "vga"; + fsl,hsync-pin = <4>; + fsl,vsync-pin = <6>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 8f0e9ae..512a1f6 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -21,6 +21,33 @@ reg = <0x70000000 0x40000000>; }; + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp0_1>; + status = "disabled"; + display-timings { + claawvga { + native-mode; + clock-frequency = <27000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <60>; + vback-porch = <10>; + vfront-porch = <10>; + hsync-len = <20>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -147,6 +174,7 @@ reg = <0x0a>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; + clocks = <&clks 150>; }; }; @@ -268,3 +296,11 @@ phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 38bed3e..abd72af 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -35,7 +35,9 @@ &esdhc2 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; + pinctrl-0 = <&pinctrl_esdhc2_1>, + <&pinctrl_tqma53_esdhc2_2>; + vmmc-supply = <®_3p3v>; wp-gpios = <&gpio1 2 0>; cd-gpios = <&gpio1 4 0>; status = "disabled"; @@ -69,14 +71,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + esdhc2_2 { + pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 { + fsl,pins = < + MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */ + MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */ + >; + }; + }; + i2s { pinctrl_i2s_1: i2s-grp1 { fsl,pins = < - MX53_PAD_GPIO_19__GPIO4_5 0x10000 /* I2S_MCLK */ - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x10000 /* I2S_SCLK */ - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x10000 /* I2S_DOUT */ - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */ - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x10000 /* I2S_DIN */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */ + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */ + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */ + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */ >; }; }; @@ -84,16 +94,17 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x10000 /* VSYNC */ - MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */ - MX53_PAD_PATA_DA_1__GPIO7_7 0x10000 /* LCD_BLT_EN */ - MX53_PAD_PATA_DA_2__GPIO7_8 0x10000 /* LCD_RESET */ - MX53_PAD_PATA_DATA5__GPIO2_5 0x10000 /* LCD_POWER */ - MX53_PAD_PATA_DATA6__GPIO2_6 0x10000 /* PMIC_INT */ - MX53_PAD_PATA_DATA14__GPIO2_14 0x10000 /* CSI_RST */ - MX53_PAD_PATA_DATA15__GPIO2_15 0x10000 /* CSI_PWDN */ - MX53_PAD_GPIO_0__GPIO1_0 0x10000 /* SYSTEM_DOWN */ - MX53_PAD_GPIO_3__GPIO1_3 0x10000 + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */ + MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */ + MX53_PAD_GPIO_3__GPIO1_3 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */ + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */ >; }; }; @@ -149,7 +160,7 @@ reg = <0x8>; fsl,mc13xxx-uses-rtc; interrupt-parent = <&gpio2>; - interrupts = <6 8>; /* PDATA_DATA6, low active */ + interrupts = <6 4>; /* PATA_DATA6, active high */ }; sensor1: lm75@48 { diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi new file mode 100644 index 0000000..f494766 --- /dev/null +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -0,0 +1,122 @@ +/* + * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "imx53.dtsi" + +/ { + model = "Ka-Ro TX53"; + compatible = "karo,tx53", "fsl,imx53"; + + memory { + reg = <0x70000000 0x40000000>; /* Up to 1GiB */ + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_2>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_1>; + status = "disabled"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_2>; + status = "disabled"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; + status = "disabled"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "disabled"; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire_1>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2_1>; + status = "disabled"; +}; + +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "disabled"; +}; + +&ssi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>, + <&pinctrl_uart1_3>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_2>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index eb83aa0..3895fbb 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -27,6 +27,9 @@ gpio4 = &gpio5; gpio5 = &gpio6; gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; }; tzic: tz-interrupt-controller@0fffc000 { @@ -163,10 +166,27 @@ }; }; + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks 124>; + clock-names = "main_clk"; + status = "okay"; + }; + + usbphy1: usbphy@1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks 125>; + clock-names = "main_clk"; + status = "okay"; + }; + usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -174,6 +194,9 @@ compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80200 0x0200>; interrupts = <14>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -181,6 +204,8 @@ compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80400 0x0200>; interrupts = <16>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -188,9 +213,18 @@ compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80600 0x0200>; interrupts = <17>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@53f80800 { + #index-cells = <1>; + compatible = "fsl,imx53-usbmisc"; + reg = <0x53f80800 0x200>; + clocks = <&clks 108>; + }; + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; @@ -267,6 +301,24 @@ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 >; }; + + pinctrl_audmux_2: audmuxgrp-2 { + fsl,pins = < + MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 + MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 + MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 + MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 + >; + }; + + pinctrl_audmux_3: audmuxgrp-3 { + fsl,pins = < + MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 + MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 + MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 + MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 + >; + }; }; fec { @@ -284,6 +336,29 @@ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 >; }; + + pinctrl_fec_2: fecgrp-2 { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_KEY_ROW1__FEC_COL 0x80000000 + MX53_PAD_KEY_COL3__FEC_CRS 0x80000000 + MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000 + MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000 + MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000 + MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000 + MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000 + MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000 + >; + }; }; csi { @@ -312,6 +387,22 @@ MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 >; }; + + pinctrl_csi_2: csigrp-2 { + fsl,pins = < + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5 + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5 + >; + }; }; cspi { @@ -322,6 +413,14 @@ MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 >; }; + + pinctrl_cspi_2: cspigrp-2 { + fsl,pins = < + MX53_PAD_EIM_D22__CSPI_MISO 0x1d5 + MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5 + MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5 + >; + }; }; ecspi1 { @@ -332,6 +431,27 @@ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 >; }; + + pinctrl_ecspi1_2: ecspi1grp-2 { + fsl,pins = < + MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 + MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 + MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 + >; + }; + }; + + ecspi2 { + pinctrl_ecspi2_1: ecspi2grp-1 { + fsl,pins = < + MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000 + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000 + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000 + >; + }; }; esdhc1 { @@ -406,6 +526,13 @@ MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 >; }; + + pinctrl_can1_3: can1grp-3 { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 + >; + }; }; can2 { @@ -424,6 +551,13 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 >; }; + + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 + MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 + >; + }; }; i2c2 { @@ -433,6 +567,13 @@ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 >; }; + + pinctrl_i2c2_2: i2c2grp-2 { + fsl,pins = < + MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 + MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 + >; + }; }; i2c3 { @@ -444,6 +585,119 @@ }; }; + ipu_disp0 { + pinctrl_ipu_disp0_1: ipudisp0grp-1 { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 + >; + }; + }; + + ipu_disp1 { + pinctrl_ipu_disp1_1: ipudisp1grp-1 { + fsl,pins = < + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 + MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 + MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 + MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 + MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 + MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 + MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 + >; + }; + }; + + ipu_disp2 { + pinctrl_ipu_disp2_1: ipudisp2grp-1 { + fsl,pins = < + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 + >; + }; + }; + + nand { + pinctrl_nand_1: nandgrp-1 { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 + >; + }; + }; + owire { pinctrl_owire_1: owiregrp-1 { fsl,pins = < @@ -452,6 +706,22 @@ }; }; + pwm1 { + pinctrl_pwm1_1: pwm1grp-1 { + fsl,pins = < + MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 + >; + }; + }; + + pwm2 { + pinctrl_pwm2_1: pwm2grp-1 { + fsl,pins = < + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -466,6 +736,13 @@ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 >; }; + + pinctrl_uart1_3: uart1grp-3 { + fsl,pins = < + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 + >; + }; }; uart2 { @@ -475,6 +752,15 @@ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 >; }; + + pinctrl_uart2_2: uart2grp-2 { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 + >; + }; }; uart3 { @@ -513,7 +799,6 @@ >; }; }; - }; gpr: iomuxc-gpr@53fa8000 { @@ -781,6 +1066,16 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + tve: tve@63ff0000 { + compatible = "fsl,imx53-tve"; + reg = <0x63ff0000 0x1000>; + interrupts = <92>; + clocks = <&clks 69>, <&clks 116>; + clock-names = "tve", "di_sel"; + crtcs = <&ipu 1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts index 7adcec3..95da711 100644 --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -28,4 +28,12 @@ >; }; }; + + ecspi1 { + pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { + fsl,pins = < + MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 + >; + }; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 7efb05d..8989df2 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -29,6 +29,7 @@ MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6DL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 5bcdf3a..2b3ecd6 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -18,12 +18,14 @@ cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; }; @@ -35,6 +37,27 @@ compatible = "fsl,imx6dl-iomuxc"; reg = <0x020e0000 0x4000>; + audmux { + pinctrl_audmux_2: audmux-2 { + fsl,pins = < + MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 + MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 + MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 + MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + >; + }; + }; + enet { pinctrl_enet_1: enetgrp-1 { fsl,pins = < @@ -78,6 +101,39 @@ }; }; + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = < + MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + }; + + i2c1 { + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -149,6 +205,64 @@ }; }; + weim { + pinctrl_weim_cs0_1: weim_cs0grp-1 { + fsl,pins = < + MX6DL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor_1: weim_norgrp-1 { + fsl,pins = < + MX6DL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6DL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + /* data */ + MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* address */ + MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6DL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6DL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6DL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6DL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6DL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6DL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6DL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6DL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6DL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6DL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6DL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6DL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6DL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6DL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6DL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6DL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + }; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts new file mode 100644 index 0000000..7d37ec6 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q-phytec-pfla02.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board"; + compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q"; +}; + +&fec { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi new file mode 100644 index 0000000..f5e1981 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6q.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 Ouad"; + compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + >; + }; + }; + + pfla02 { + pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 { + fsl,pins = < + MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2 + &pinctrl_usdhc3_pfla02>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 49d6f28..09a7580 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -32,4 +32,12 @@ >; }; }; + + ecspi1 { + pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { + fsl,pins = < + MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 + >; + }; + }; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 4420513..0038228 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -33,6 +33,7 @@ MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000 MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000 MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 21e6758..ba09dc3 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -18,6 +18,7 @@ cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; operating-points = < @@ -39,18 +40,21 @@ cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; }; cpu@2 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; }; cpu@3 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; }; @@ -157,6 +161,27 @@ MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 >; }; + + pinctrl_enet_3: enetgrp-3 { + fsl,pins = < + MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; }; gpmi-nand { @@ -168,8 +193,6 @@ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 - MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 @@ -192,6 +215,13 @@ MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; + + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; }; i2c2 { @@ -268,6 +298,17 @@ MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; + + pinctrl_usdhc2_2: usdhc2grp-2 { + fsl,pins = < + MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; }; usdhc3 { @@ -325,6 +366,65 @@ >; }; }; + + weim { + pinctrl_weim_cs0_1: weim_cs0grp-1 { + fsl,pins = < + MX6Q_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor_1: weimnorgrp-1 { + fsl,pins = < + MX6Q_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6Q_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + /* data */ + MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* address */ + MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6Q_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6Q_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6Q_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6Q_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6Q_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6Q_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6Q_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6Q_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6Q_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6Q_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6Q_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6Q_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6Q_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6Q_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6Q_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6Q_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 4d237cf..e994011 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -16,6 +16,22 @@ }; }; +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>; + status = "disabled"; /* pin conflict with WEIM NOR */ + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_2>; @@ -23,6 +39,12 @@ status = "okay"; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_1>; @@ -36,3 +58,22 @@ wp-gpios = <&gpio1 13 0>; status = "okay"; }; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + status = "disabled"; /* pin conflict with SPI NOR */ + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index e21f6a8..6e5dfdb 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -26,6 +26,13 @@ gpio = <&gpio3 22 0>; enable-active-high; }; + + reg_audio: wm8962_supply { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 0>; + enable-active-high; + }; }; gpio-keys { @@ -43,6 +50,31 @@ linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; + + sound { + compatible = "fsl,imx6q-sabresd-wm8962", + "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "MICBIAS", "AMIC", + "IN3R", "MICBIAS", + "DMIC", "MICBIAS", + "DMICDAT", "DMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "okay"; }; &fec { @@ -52,6 +84,40 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks 169>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 9e8296e..f21d259 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -106,6 +106,8 @@ interrupts = <0 92 0x04>; cache-unified; cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; }; pmu { @@ -638,7 +640,7 @@ status = "disabled"; }; - usbmisc: usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; @@ -742,9 +744,11 @@ reg = <0x021b4000 0x4000>; }; - weim@021b8000 { + weim: weim@021b8000 { + compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <0 14 0x04>; + clocks = <&clks 196>; }; ocotp@021bc000 { @@ -752,11 +756,6 @@ reg = <0x021bc000 0x4000>; }; - ocotp@021c0000 { - reg = <0x021c0000 0x4000>; - interrupts = <0 21 0x04>; - }; - tzasc@021d0000 { /* TZASC1 */ reg = <0x021d0000 0x4000>; interrupts = <0 108 0x04>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts new file mode 100644 index 0000000..2886a59 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_1>; + bus-width = <8>; + cd-gpios = <&gpio4 7 0>; + wp-gpios = <&gpio4 6 0>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio5 0 0>; + wp-gpios = <&gpio4 29 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio3 22 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi new file mode 100644 index 0000000..c5e5da0 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -0,0 +1,779 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "skeleton.dtsi" +#include "imx6sl-pinfunc.h" +#include <dt-bindings/clock/imx6sl-clock.h> + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + osc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <0 92 0x04>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 94 0x04>; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <0 31 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI1>, + <&clks IMX6SL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <0 32 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI2>, + <&clks IMX6SL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <0 33 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI3>, + <&clks IMX6SL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <0 34 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI4>, + <&clks IMX6SL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@02018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts = <0 30 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@02024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <0 27 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <0 46 0x04>; + clocks = <&clks IMX6SL_CLK_SSI1>; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <0 47 0x04>; + clocks = <&clks IMX6SL_CLK_SSI2>; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <0 48 0x04>; + clocks = <&clks IMX6SL_CLK_SSI3>; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + uart3: serial@02034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@02038000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02038000 0x4000>; + interrupts = <0 29 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@02080000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <0 83 0x04>; + clocks = <&clks IMX6SL_CLK_PWM1>, + <&clks IMX6SL_CLK_PWM1>; + clock-names = "ipg", "per"; + }; + + pwm2: pwm@02084000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <0 84 0x04>; + clocks = <&clks IMX6SL_CLK_PWM2>, + <&clks IMX6SL_CLK_PWM2>; + clock-names = "ipg", "per"; + }; + + pwm3: pwm@02088000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <0 85 0x04>; + clocks = <&clks IMX6SL_CLK_PWM3>, + <&clks IMX6SL_CLK_PWM3>; + clock-names = "ipg", "per"; + }; + + pwm4: pwm@0208c000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <0 86 0x04>; + clocks = <&clks IMX6SL_CLK_PWM4>, + <&clks IMX6SL_CLK_PWM4>; + clock-names = "ipg", "per"; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <0 55 0x04>; + clocks = <&clks IMX6SL_CLK_GPT>, + <&clks IMX6SL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <0 66 0x04 0 67 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <0 68 0x04 0 69 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <0 70 0x04 0 71 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <0 72 0x04 0 73 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <0 74 0x04 0 75 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + reg = <0x020b8000 0x4000>; + interrupts = <0 82 0x04>; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 0x04>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <0 81 0x04>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2850000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pu: regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; + clocks = <&clks IMX6SL_CLK_USBPHY1>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <0 45 0x04>; + clocks = <&clks IMX6SL_CLK_USBPHY2>; + }; + + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <0 56 0x04>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <0 57 0x04>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sl-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 0x04 0 96 0x04>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 0x04>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sl-iomuxc"; + reg = <0x020e0000 0x4000>; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + }; + + usdhc1 { + pinctrl_usdhc1_1: usdhc1grp-1 { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; + }; + + csi: csi@020e4000 { + reg = <0x020e4000 0x4000>; + interrupts = <0 7 0x04>; + }; + + spdc: spdc@020e8000 { + reg = <0x020e8000 0x4000>; + interrupts = <0 6 0x04>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <0 2 0x04>; + clocks = <&clks IMX6SL_CLK_SDMA>, + <&clks IMX6SL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin"; + }; + + pxp: pxp@020f0000 { + reg = <0x020f0000 0x4000>; + interrupts = <0 98 0x04>; + }; + + epdc: epdc@020f4000 { + reg = <0x020f4000 0x4000>; + interrupts = <0 97 0x04>; + }; + + lcdif: lcdif@020f8000 { + reg = <0x020f8000 0x4000>; + interrupts = <0 39 0x04>; + }; + + dcp: dcp@020fc000 { + reg = <0x020fc000 0x4000>; + interrupts = <0 99 0x04>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh: usb@02184400 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 42 0x04>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbmisc = <&usbmisc 2>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + }; + + fec: ethernet@02188000 { + compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; + reg = <0x02188000 0x4000>; + interrupts = <0 114 0x04>; + clocks = <&clks IMX6SL_CLK_ENET_REF>, + <&clks IMX6SL_CLK_ENET_REF>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <0 22 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC1>, + <&clks IMX6SL_CLK_USDHC1>, + <&clks IMX6SL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <0 23 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC2>, + <&clks IMX6SL_CLK_USDHC2>, + <&clks IMX6SL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <0 24 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC3>, + <&clks IMX6SL_CLK_USDHC3>, + <&clks IMX6SL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <0 25 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC4>, + <&clks IMX6SL_CLK_USDHC4>, + <&clks IMX6SL_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <0 36 0x04>; + clocks = <&clks IMX6SL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <0 37 0x04>; + clocks = <&clks IMX6SL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <0 38 0x04>; + clocks = <&clks IMX6SL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + rngb: rngb@021b4000 { + reg = <0x021b4000 0x4000>; + interrupts = <0 5 0x04>; + }; + + weim: weim@021b8000 { + reg = <0x021b8000 0x4000>; + interrupts = <0 14 0x04>; + }; + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6sl-ocotp"; + reg = <0x021bc000 0x4000>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 5137668..1e5bef0 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -71,5 +71,33 @@ status = "disabled"; }; }; + + rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + status = "disabled"; + }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 66a751a..a63a111 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -49,6 +49,34 @@ }; }; + rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + status = "disabled"; + }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; + thermal@10078 { compatible = "marvell,kirkwood-thermal"; reg = <0x10078 0x4>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 5f21d4e..00c48d2 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -18,10 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_spi &pmx_uart0 - &pmx_cloudbox_sata0 >; - pinctrl-names = "default"; - pmx_cloudbox_sata0: pmx-cloudbox-sata0 { marvell,pins = "mpp15"; marvell,function = "sata0"; @@ -29,16 +25,22 @@ }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; clock-frequency = <166666667>; status = "okay"; }; sata@80000 { + pinctrl-0 = <&pmx_cloudbox_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; spi@10600 { + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index c9c44b2..14d4cee 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -17,6 +17,11 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320 + &pmx_led_red_left_hdd &pmx_led_red_right_hdd + &pmx_led_white_usb>; + pinctrl-names = "default"; + blue-power { label = "dns320:blue:power"; gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ @@ -46,6 +51,8 @@ }; serial@12100 { + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index e4e4930..6387257 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -17,6 +17,11 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325 + &pmx_led_red_left_hdd &pmx_led_red_right_hdd + &pmx_led_white_usb>; + pinctrl-names = "default"; + white-power { label = "dns325:white:power"; gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 6875ac0..0afe1d0 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -9,6 +9,10 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_power &pmx_button_unmount + &pmx_button_reset>; + pinctrl-names = "default"; + button@1 { label = "Power button"; linux,code = <116>; @@ -29,6 +33,8 @@ gpio_fan { /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; + pinctrl-names = "default"; gpios = <&gpio1 14 1 &gpio1 13 1>; gpio-fan,speed-map = <0 0 @@ -38,27 +44,17 @@ gpio_poweroff { compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_power_off>; + pinctrl-names = "default"; gpios = <&gpio1 4 0>; }; ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_nand &pmx_uart1 - &pmx_sata0 &pmx_sata1 - &pmx_led_power - &pmx_led_red_right_hdd - &pmx_led_red_left_hdd - &pmx_led_red_usb_325 - &pmx_button_power - &pmx_led_red_usb_320 - &pmx_power_off &pmx_power_back_on - &pmx_power_sata0 &pmx_power_sata1 - &pmx_present_sata0 &pmx_present_sata1 - &pmx_led_white_usb &pmx_fan_tacho - &pmx_fan_high_speed &pmx_fan_low_speed - &pmx_button_unmount &pmx_button_reset - &pmx_temp_alarm >; + pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 + &pmx_present_sata1 &pmx_fan_tacho + &pmx_temp_alarm>; pinctrl-names = "default"; pmx_sata0: pmx-sata0 { @@ -147,11 +143,15 @@ }; }; sata@80000 { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; status = "okay"; nr-ports = <2>; }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "okay"; chip-delay = <35>; @@ -192,6 +192,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; + pinctrl-names = "default"; sata0_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 0196cf6..7714742 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -18,11 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_usb_power_enable - &pmx_led_green &pmx_led_orange >; - pinctrl-names = "default"; - pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; @@ -62,6 +57,8 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_green &pmx_led_orange>; + pinctrl-names = "default"; health { label = "status:green:health"; @@ -77,6 +74,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 289e51d8..36c7ba3 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -18,12 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_spi - &pmx_led_bluetooth &pmx_led_wifi - &pmx_led_wifi_ap >; - pinctrl-names = "default"; - pmx_led_bluetooth: pmx-led-bluetooth { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -43,6 +37,8 @@ spi@10600 { status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; m25p40@0 { #address-cells = <1>; @@ -79,11 +75,15 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi + &pmx_led_wifi_ap >; + pinctrl-names = "default"; bluetooth { label = "dreamplug:blue:bluetooth"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index c3573be..31caa64 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -18,15 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange - &pmx_led_left_cap_0 &pmx_led_left_cap_1 - &pmx_led_left_cap_2 &pmx_led_left_cap_3 - &pmx_led_right_cap_0 &pmx_led_right_cap_1 - &pmx_led_right_cap_2 &pmx_led_right_cap_3 - >; - pinctrl-names = "default"; - pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; @@ -109,6 +100,13 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; health { label = "status:green:health"; @@ -156,6 +154,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 44fd97d..1e642f3 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -18,11 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g - &pmx_led_wmode_r &pmx_led_wmode_g >; - pinctrl-names = "default"; - pmx_led_health_r: pmx-led-health-r { marvell,pins = "mpp46"; marvell,function = "gpio"; @@ -72,11 +67,16 @@ mvsdio@90000 { status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g + &pmx_led_wmode_r &pmx_led_wmode_g >; + pinctrl-names = "default"; health-r { label = "guruplug:red:health"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 5335b1a..20c4b08 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -18,13 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand - &pmx_led_os_red &pmx_power_off - &pmx_led_os_green &pmx_led_usb_transfer - &pmx_button_reset &pmx_button_usb_copy >; - pinctrl-names = "default"; - pmx_led_os_red: pmx-led-os-red { marvell,pins = "mpp22"; marvell,function = "gpio"; @@ -61,6 +54,8 @@ nand@3000000 { status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; partition@0 { label = "u-boot"; @@ -84,6 +79,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; + pinctrl-names = "default"; + button@1 { label = "USB Copy"; linux,code = <133>; @@ -97,6 +95,9 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green + &pmx_led_usb_transfer>; + pinctrl-names = "default"; green-os { label = "ib62x0:green:os"; @@ -114,6 +115,8 @@ }; gpio_poweroff { compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_power_off>; + pinctrl-names = "default"; gpios = <&gpio0 24 0>; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index e591d5d..441204e 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -20,51 +20,43 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35 - &pmx_gpio_41 &pmx_gpio_42 - &pmx_gpio_43 &pmx_gpio_44 - &pmx_gpio_45 &pmx_gpio_46 - &pmx_gpio_47 &pmx_gpio_48 >; - pinctrl-names = "default"; - - pmx_gpio_12: pmx-gpio-12 { + pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; }; - pmx_gpio_35: pmx-gpio-35 { + pmx_button_otb: pmx-button-otb { marvell,pins = "mpp35"; marvell,function = "gpio"; }; - pmx_gpio_41: pmx-gpio-41 { + pmx_led_level: pmx-led-level { marvell,pins = "mpp41"; marvell,function = "gpio"; }; - pmx_gpio_42: pmx-gpio-42 { + pmx_led_power_blue: pmx-led-power-blue { marvell,pins = "mpp42"; marvell,function = "gpio"; }; - pmx_gpio_43: pmx-gpio-43 { + pmx_led_power_red: pmx-power-red { marvell,pins = "mpp43"; marvell,function = "gpio"; }; - pmx_gpio_44: pmx-gpio-44 { + pmx_led_usb1: pmx-led-usb1 { marvell,pins = "mpp44"; marvell,function = "gpio"; }; - pmx_gpio_45: pmx-gpio-45 { + pmx_led_usb2: pmx-led-usb2 { marvell,pins = "mpp45"; marvell,function = "gpio"; }; - pmx_gpio_46: pmx-gpio-46 { + pmx_led_usb3: pmx-led-usb3 { marvell,pins = "mpp46"; marvell,function = "gpio"; }; - pmx_gpio_47: pmx-gpio-47 { + pmx_led_usb4: pmx-led-usb4 { marvell,pins = "mpp47"; marvell,function = "gpio"; }; - pmx_gpio_48: pmx-gpio-48 { + pmx_led_otb: pmx-led-otb { marvell,pins = "mpp48"; marvell,function = "gpio"; }; @@ -121,6 +113,11 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_level &pmx_led_power_blue + &pmx_led_power_red &pmx_led_usb1 + &pmx_led_usb2 &pmx_led_usb3 + &pmx_led_usb4 &pmx_led_otb >; + pinctrl-names = "default"; led-level { label = "led_level"; @@ -162,6 +159,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; + pinctrl-names = "default"; + button@1 { label = "OTB Button"; linux,code = <133>; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 3694e94..00a7bfe 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -18,12 +18,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_button_reset &pmx_button_power - &pmx_led_backup &pmx_led_power - &pmx_button_otb &pmx_led_rebuild - &pmx_led_health - &pmx_led_sata_brt_ctrl_1 + pinctrl-0 = < &pmx_led_sata_brt_ctrl_1 &pmx_led_sata_brt_ctrl_2 &pmx_led_backup_brt_ctrl_1 &pmx_led_backup_brt_ctrl_2 @@ -151,6 +146,9 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_backup &pmx_led_power + &pmx_led_rebuild &pmx_led_health >; + pinctrl-names = "default"; power_led { label = "status:white:power_led"; @@ -174,6 +172,11 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_reset &pmx_button_power + &pmx_button_otb>; + pinctrl-names = "default"; + + Power { label = "Power Button"; linux,code = <116>; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index 0bdce0a..c3f036b 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 5bbd054..5d9f5ea 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -18,9 +18,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda - &pmx_i2c_gpio_scl >; + pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; pinctrl-names = "default"; pmx_i2c_gpio_sda: pmx-gpio-sda { @@ -38,8 +36,17 @@ }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "ok"; chip-delay = <25>; }; }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = < &gpio0 8 0 /* sda */ + &gpio0 9 0 >; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 996c7fe..31b17f5 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -8,16 +8,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus - &pmx_fan_low &pmx_fan_high - &pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_fan_lock &pmx_button_function - &pmx_power_switch &pmx_power_auto_switch - &pmx_led_function_blue >; - pinctrl-names = "default"; - pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; @@ -112,6 +102,10 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + button@1 { label = "Function Button"; linux,code = <357>; @@ -133,6 +127,10 @@ gpio_leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue>; + pinctrl-names = "default"; led@1 { label = "lsxl:blue:func"; @@ -163,6 +161,8 @@ gpio_fan { compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; gpios = <&gpio0 19 1 &gpio0 18 1>; gpio-fan,speed-map = <0 3 @@ -180,6 +180,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 90501cf..6179333 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -18,16 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_led_health - &pmx_sata0 &pmx_sata1 - &pmx_led_user1o - &pmx_led_user1g &pmx_led_user0o - &pmx_led_user0g &pmx_led_misc - >; - pinctrl-names = "default"; - pmx_led_health: pmx-led-health { marvell,pins = "mpp7"; marvell,function = "gpo"; @@ -91,9 +81,13 @@ serial@12000 { status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "okay"; partition@0 { @@ -127,16 +121,17 @@ }; sata@80000 { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; nr-ports = <2>; status = "okay"; - }; mvsdio@90000 { pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; pinctrl-names = "default"; status = "okay"; - cd-gpios = <&gpio1 15 0>; + cd-gpios = <&gpio1 15 1>; /* No WP GPIO */ }; @@ -151,6 +146,12 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_health + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + >; + pinctrl-names = "default"; health { label = "status:green:health"; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 0f852b4..ad6ade7 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -18,18 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_uart0 - &pmx_button_power - &pmx_button_backup - &pmx_button_reset - &pmx_led_blue_power - &pmx_led_blue_activity - &pmx_led_blue_disk1 - &pmx_led_blue_disk2 - &pmx_led_blue_backup >; - pinctrl-names = "default"; - pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -74,6 +62,8 @@ }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "okay"; }; @@ -123,6 +113,10 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity + &pmx_led_blue_disk1 &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; power_led { label = "status:blue:power_led"; @@ -151,6 +145,10 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_power &pmx_button_backup + &pmx_button_reset>; + pinctrl-names = "default"; + button@1 { label = "Power Button"; linux,code = <116>; /* KEY_POWER */ diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 6affd92..2afac04 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -8,10 +8,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 - &pmx_ns2_sata0 &pmx_ns2_sata1>; - pinctrl-names = "default"; - pmx_ns2_sata0: pmx-ns2-sata0 { marvell,pins = "mpp21"; marvell,function = "sata0"; @@ -23,10 +19,14 @@ }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "okay"; }; spi@10600 { + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "okay"; flash@0 { @@ -45,6 +45,8 @@ }; i2c@11000 { + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; status = "okay"; eeprom@50 { diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index f2d36ecf..b50e93d 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index b02eb4e..af8259f 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index bcec4d6..85f24d2 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; status = "okay"; nr-ports = <2>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index adab1ab..329e530 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -14,6 +14,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 9ddf218..6900359 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "ZyXEL NSA310"; @@ -17,22 +18,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_led_esata_green - &pmx_led_esata_red - &pmx_led_usb_green - &pmx_led_usb_red - &pmx_usb_power_off - &pmx_led_sys_green - &pmx_led_sys_red - &pmx_btn_reset - &pmx_btn_copy - &pmx_led_copy_green - &pmx_led_copy_red - &pmx_led_hdd_green - &pmx_led_hdd_red - &pmx_unknown - &pmx_btn_power - &pmx_pwr_off >; + pinctrl-0 = <&pmx_unknown>; pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { @@ -190,6 +176,8 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; + pinctrl-names = "default"; button@1 { label = "Power Button"; @@ -210,6 +198,12 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red + &pmx_led_usb_green &pmx_led_usb_red + &pmx_led_sys_green &pmx_led_sys_red + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd_green &pmx_led_hdd_red>; + pinctrl-names = "default"; green-sys { label = "nsa310:green:sys"; @@ -255,6 +249,8 @@ gpio_poweroff { compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; gpios = <&gpio1 16 0>; }; @@ -262,6 +258,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-names = "default"; usb0_power_off: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index d27f724..38dc851 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -19,15 +19,21 @@ ocp@f1000000 { serial@12000 { status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; serial@12100 { status = "ok"; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; }; nand@3000000 { chip-delay = <25>; status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; partition@0 { label = "uboot"; @@ -67,6 +73,8 @@ i2c@11100 { status = "okay"; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -75,16 +83,7 @@ }; pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_uart1 &pmx_twsi1 - &pmx_dip_sw0 &pmx_dip_sw1 - &pmx_dip_sw2 &pmx_dip_sw3 - &pmx_gpio_0 &pmx_gpio_1 - &pmx_gpio_2 &pmx_gpio_3 - &pmx_gpio_4 &pmx_gpio_5 - &pmx_gpio_6 &pmx_gpio_7 - &pmx_led_red &pmx_led_green - &pmx_led_yellow >; + pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; pmx_uart0: pmx-uart0 { @@ -104,63 +103,14 @@ marvell,function = "sysrst"; }; - pmx_dip_sw0: pmx-dip-sw0 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_dip_sw1: pmx-dip-sw1 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_dip_sw2: pmx-dip-sw2 { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_dip_sw3: pmx-dip-sw3 { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - - pmx_gpio_0: pmx-gpio-0 { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - pmx_gpio_2: pmx-gpio-2 { - marvell,pins = "mpp26"; + pmx_dip_switches: pmx-dip-switches { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23"; marvell,function = "gpio"; }; - pmx_gpio_3: pmx-gpio-3 { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_gpio_4: pmx-gpio-4 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_gpio_5: pmx-gpio-5 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_gpio_6: pmx-gpio-6 { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - pmx_gpio_7: pmx-gpio-7 { - marvell,pins = "mpp31"; + pmx_gpio_header: pmx-gpio-header { + marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27", + "mpp28", "mpp29", "mpp30", "mpp31"; marvell,function = "gpio"; }; @@ -174,18 +124,8 @@ marvell,function = "gpio"; }; - pmx_led_red: pmx-led-red { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led-green { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_led_yellow: pmx-led-yellow { - marvell,pins = "mpp43"; + pmx_leds: pmx-leds { + marvell,pins = "mpp41", "mpp42", "mpp43"; marvell,function = "gpio"; }; }; @@ -193,6 +133,8 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; led-red { label = "obsa6:red:stat"; @@ -209,4 +151,18 @@ gpios = <&gpio1 11 1>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_gpio_init>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 6 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi new file mode 100644 index 0000000..f7143f1 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -0,0 +1,93 @@ +/* + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_red: pmx-led-red { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_blue: pmx-led-blue { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_sdio_wp: pmx-sdio-wp { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "okay"; + }; + + nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x0500000 0x1fb00000>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts new file mode 100644 index 0000000..f620ce4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -0,0 +1,43 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies eSATA SheevaPlug"; + compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 12 1>; + wp-gpios = <&gpio1 15 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_blue>; + pinctrl-names = "default"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts new file mode 100644 index 0000000..bf1dff2 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -0,0 +1,43 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies SheevaPlug"; + compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_blue &pmx_led_red>; + pinctrl-names = "default"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + + misc { + label = "sheevaplug:red:misc"; + gpios = <&gpio1 14 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 66eb45b..f2052d7 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -19,18 +19,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { /* - * GPIO LED layout - * - * /-SYS_LED(2) - * | - * | /-DISK_LED - * | | - * | | /-WLAN_LED(2) - * | | | - * [SW] [*] [*] [*] - */ - - /* * Switch positions * * /-SW_LEFT(2) @@ -41,19 +29,8 @@ * | | | * PS [L] [I] [R] LEDS */ - pinctrl-0 = < &pmx_led_disk_yellow - &pmx_sata0_pwr_enable - &pmx_led_sys_red - &pmx_led_sys_blue - &pmx_led_wifi_green - &pmx_sw_left - &pmx_sw_right - &pmx_sw_idle - &pmx_sw_left2 - &pmx_led_wifi_yellow - &pmx_uart0 - &pmx_nand - &pmx_twsi0 >; + pinctrl-0 = <&pmx_sw_left &pmx_sw_right + &pmx_sw_idle &pmx_sw_left2>; pinctrl-names = "default"; pmx_led_disk_yellow: pmx-led-disk-yellow { @@ -109,10 +86,14 @@ serial@12000 { status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; nand@3000000 { status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; partition@0 { label = "u-boot"; @@ -147,6 +128,8 @@ i2c@11000 { status = "ok"; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; }; mvsdio@90000 { @@ -154,11 +137,28 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; }; gpio-leds { + /* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red + &pmx_led_sys_blue &pmx_led_wifi_green + &pmx_led_wifi_yellow>; + pinctrl-names = "default"; disk { label = "topkick:yellow:disk"; @@ -187,6 +187,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_pwr_enable>; + pinctrl-names = "default"; sata0_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 42648ab..6dd1038 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -8,10 +8,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi - &pmx_twsi0 &pmx_sata0 &pmx_sata1 - &pmx_ram_size &pmx_reset_button - &pmx_USB_copy_button &pmx_board_id>; + pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; pmx_ram_size: pmx-ram-size { @@ -39,6 +36,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; + pinctrl-names = "default"; + button@1 { label = "USB Copy"; linux,code = <133>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 95ceeb9..6fdc5ff 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -8,10 +8,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi - &pmx_twsi0 &pmx_sata0 &pmx_sata1 - &pmx_ram_size &pmx_reset_button - &pmx_USB_copy_button &pmx_board_id>; + pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; pmx_ram_size: pmx-ram-size { @@ -33,12 +30,23 @@ marvell,function = "gpio"; }; }; + pcie-controller { + status = "okay"; + + pcie@2,0 { + status = "okay"; + }; + }; + }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; + pinctrl-names = "default"; + button@1 { label = "USB Copy"; linux,code = <133>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 09c820f..0c9a94c 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -15,6 +15,8 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -24,10 +26,14 @@ serial@12000 { clock-frequency = <200000000>; status = "okay"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; serial@12100 { clock-frequency = <200000000>; status = "okay"; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; }; poweroff@12100 { compatible = "qnap,power-off"; @@ -36,6 +42,8 @@ }; spi@10600 { status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; @@ -74,6 +82,8 @@ }; }; sata@80000 { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; status = "okay"; nr-ports = <2>; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7eef88f..9809fc1 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -4,6 +4,18 @@ compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,feroceon"; + clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; + clock-names = "cpu_clk", "ddrclk", "powersave"; + }; + }; + aliases { gpio0 = &gpio0; gpio1 = &gpio1; @@ -18,8 +30,9 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 + ranges = <0x00000000 0xf1000000 0x0100000 0xe0000000 0xe0000000 0x8100000 /* PCIE */ + 0xf4000000 0xf4000000 0x0000400 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; @@ -72,13 +85,6 @@ status = "disabled"; }; - rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; @@ -152,15 +158,6 @@ status = "okay"; }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - status = "disabled"; - }; - nand@3000000 { #address-cells = <1>; #size-cells = <1>; @@ -168,7 +165,7 @@ ale = <1>; bank-width = <1>; compatible = "marvell,orion-nand"; - reg = <0x3000000 0x400>; + reg = <0xf4000000 0x400>; chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ clocks = <&gate_clk 7>; @@ -195,13 +192,5 @@ clocks = <&gate_clk 17>; status = "okay"; }; - - mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 1582f48..3abebb7 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -18,8 +18,12 @@ interrupt-parent = <&mic>; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 37aa748..a2bfcde 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -8,7 +8,10 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/omap.h> + +#include "skeleton.dtsi" / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; @@ -21,8 +24,12 @@ }; cpus { - cpu@0 { + #address-cells = <0>; + #size-cells = <0>; + + cpu { compatible = "arm,arm1136jf-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 68282ee..224c08f 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2420.dtsi" +#include "omap2420.dtsi" / { model = "TI OMAP2420 H4 board"; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index da5b285..c8f9c55 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -/include/ "omap2.dtsi" +#include "omap2.dtsi" / { compatible = "ti,omap2420", "ti,omap2"; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 054bc44..c535a5a 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -/include/ "omap2.dtsi" +#include "omap2.dtsi" / { compatible = "ti,omap2430", "ti,omap2"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 3046d1f..afdb164 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap36xx.dtsi" +#include "omap36xx.dtsi" / { model = "TI OMAP3 BeagleBoard xM"; @@ -29,13 +29,13 @@ heartbeat { label = "beagleboard::usr0"; - gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; mmc { label = "beagleboard::usr1"; - gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0"; }; }; @@ -57,6 +57,26 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + linux,code = <0x114>; + gpio-key,wakeup; + }; + + }; +}; + +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + 0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ + >; + }; }; &i2c1 { @@ -75,7 +95,8 @@ }; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" &i2c2 { clock-frequency = <400000>; @@ -126,3 +147,22 @@ mode = <3>; power = <50>; }; + +&omap3_pmx_core { + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 6eec699..dfd8310 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { model = "TI OMAP3 BeagleBoard"; @@ -28,18 +28,18 @@ compatible = "gpio-leds"; pmu_stat { label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 0>; /* LEDB */ + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ }; heartbeat { label = "beagleboard::usr0"; - gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; mmc { label = "beagleboard::usr1"; - gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0"; }; }; @@ -71,6 +71,26 @@ reset-supply = <&hsusb2_reset>; vcc-supply = <&hsusb2_power>; }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + linux,code = <0x114>; + gpio-key,wakeup; + }; + + }; +}; + +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + >; + }; }; &omap3_pmx_core { @@ -81,18 +101,25 @@ hsusbb2_pins: pinmux_hsusbb2_pins { pinctrl-single,pins = < - 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */ - 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */ - 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */ - 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */ - 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */ - 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */ - 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */ - 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */ - 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */ - 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */ - 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */ - 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */ + 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */ + 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */ + 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */ + 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */ + 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */ + 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */ + 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */ + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */ + 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */ + 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; }; @@ -107,7 +134,8 @@ }; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; @@ -142,3 +170,13 @@ */ ti,pulldowns = <0x03a1c4>; }; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 8a5cdcc..af32eff 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { model = "TimLL OMAP3 Devkit8000"; compatible = "timll,omap3-devkit8000", "ti,omap3"; @@ -22,21 +22,21 @@ heartbeat { label = "devkit8000::led1"; - gpios = <&gpio6 26 0>; /* 186 -> LED1 */ + gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ default-state = "on"; linux,default-trigger = "heartbeat"; }; mmc { label = "devkit8000::led2"; - gpios = <&gpio6 3 0>; /* 163 -> LED2 */ + gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ default-state = "on"; linux,default-trigger = "none"; }; usr { label = "devkit8000::led3"; - gpios = <&gpio6 4 0>; /* 164 -> LED3 */ + gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ default-state = "on"; linux,default-trigger = "usr"; }; @@ -80,7 +80,8 @@ status = "disabled"; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 96d1c20..7d4329d 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; @@ -28,7 +28,7 @@ compatible = "gpio-leds"; ledb { label = "omap3evm::ledb"; - gpios = <&twl_gpio 19 0>; /* LEDB */ + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ linux,default-trigger = "default-on"; }; }; @@ -44,7 +44,8 @@ }; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" &i2c2 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index f8fe3b7..bc48b11 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { memory { @@ -29,37 +29,43 @@ &omap3_pmx_core { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */ - 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */ + 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */ - 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ - 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */ + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */ - 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */ - 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */ - 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */ - 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */ - 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */ - 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */ - 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */ - 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */ - 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */ + 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + smsc911x_pins: pinmux_smsc911x_pins { + pinctrl-single,pins = < + 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; }; }; @@ -80,7 +86,8 @@ }; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" &i2c2 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index e2b9849..e8c4828 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -/include/ "omap3-igep.dtsi" +#include "omap3-igep.dtsi" / { model = "IGEPv2"; @@ -19,27 +19,39 @@ compatible = "gpio-leds"; boot { label = "omap3:green:boot"; - gpios = <&gpio1 26 0>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; default-state = "on"; }; user0 { label = "omap3:red:user0"; - gpios = <&gpio1 27 0>; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; default-state = "off"; }; user1 { label = "omap3:red:user1"; - gpios = <&gpio1 28 0>; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; user2 { label = "omap3:green:user1"; - gpios = <&twl_gpio 19 1>; + gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; }; }; + + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; }; &i2c3 { @@ -54,3 +66,92 @@ reg = <0x50>; }; }; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>, + <5 0 0x2c000000 0x01000000>; + + nand@0,0 { + linux,mtd-name= "micron,mt29c4g96maz"; + reg = <0 0 0>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0 0x100000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x100000 0x180000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x280000 0x100000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x380000 0x300000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x680000 0x1f980000>; + }; + }; + + ethernet@5,0 { + pinctrl-names = "default"; + pinctrl-0 = <&smsc911x_pins>; + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0 0xff>; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + interrupt-parent = <&gpio6>; + interrupts = <16 8>; + vmmc-supply = <&vddvario>; + vmmc_aux-supply = <&vdd33a>; + reg-io-width = <4>; + + smsc,save-mac-address; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 9dc48d2..644d053 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -/include/ "omap3-igep.dtsi" +#include "omap3-igep.dtsi" / { model = "IGEP COM Module"; @@ -19,26 +19,76 @@ compatible = "gpio-leds"; boot { label = "omap3:green:boot"; - gpios = <&twl_gpio 13 1>; + gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; user0 { label = "omap3:red:user0"; - gpios = <&twl_gpio 18 1>; /* LEDA */ + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ default-state = "off"; }; user1 { label = "omap3:green:user1"; - gpios = <&twl_gpio 19 1>; /* LEDB */ + gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ default-state = "off"; }; user2 { label = "omap3:red:user1"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; }; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>; + + nand@0,0 { + linux,mtd-name= "micron,mt29c4g96maz"; + reg = <0 0 0>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0 0x100000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x100000 0x180000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x280000 0x100000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x380000 0x300000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x680000 0x1f980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index a626c50..8f1abec 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { pwmleds { @@ -21,6 +21,7 @@ label = "overo:blue:COM"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>; + linux,default-trigger = "mmc0"; }; }; @@ -49,7 +50,8 @@ }; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" /* i2c2 pins are used for gpio */ &i2c2 { @@ -77,3 +79,17 @@ mode = <3>; power = <50>; }; + +&omap3_pmx_core { + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts index a13d12d..7e4ad2a 100644 --- a/arch/arm/boot/dts/omap3-tobi.dts +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -10,7 +10,7 @@ * Tobi expansion board is manufactured by Gumstix Inc. */ -/include/ "omap3-overo.dtsi" +#include "omap3-overo.dtsi" / { model = "TI OMAP3 Gumstix Overo on Tobi"; @@ -20,10 +20,58 @@ compatible = "gpio-leds"; heartbeat { label = "overo:red:gpio21"; - gpios = <&gpio1 21 0>; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; + + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; +}; + +&gpmc { + ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ + + ethernet@5,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0 0xff>; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <42>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <42>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <36>; + gpmc,rd-cycle-ns = <60>; + gpmc,wr-cycle-ns = <54>; + gpmc,access-ns = <36>; + gpmc,page-burst-access-ns = <0>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wr-data-mux-bus-ns = <18>; + gpmc,wr-access-ns = <42>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */ + reg-io-width = <4>; + }; }; &i2c3 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99ba6e1..7d95cda 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -8,7 +8,11 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/omap.h> + +#include "skeleton.dtsi" / { compatible = "ti,omap3430", "ti,omap3"; @@ -21,8 +25,13 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0x0>; }; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 144ae43..c4a1c0a 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap34xx.dtsi" +#include "omap34xx.dtsi" / { model = "TI OMAP3430 SDP"; @@ -28,7 +28,8 @@ }; }; -/include/ "twl4030.dtsi" +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 75ed4ae..5355d61 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -/include/ "omap3.dtsi" +#include "omap3.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index f3447bc..f8b3765 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -/include/ "omap3.dtsi" +#include "omap3.dtsi" / { aliases { diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index e30cdf0..133f1b7 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -7,14 +7,14 @@ */ /dts-v1/; -/include/ "omap443x.dtsi" -/include/ "omap4-panda-common.dtsi" +#include "omap443x.dtsi" +#include "omap4-panda-common.dtsi" /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ - 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index eeb734e..faa95b5 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -5,7 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "elpida_ecb240abacn.dtsi" +#include "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -16,17 +16,22 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - leds { + leds: leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = < + &led_wkgpio_pins + >; + heartbeat { label = "pandaboard::status1"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; mmc { label = "pandaboard::status2"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; }; @@ -54,6 +59,54 @@ "AFML", "Line In", "AFMR", "Line In"; }; + + /* + * Temp hack: Need to be replaced with the proper gpio-controlled + * reset driver as soon it will be merged. + * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 + */ + /* HS USB Port 1 RESET */ + hsusb1_reset: hsusb1_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 30 0>; /* gpio_62 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 1 0>; /* gpio_1 */ + startup-delay-us = <70000>; + enable-active-high; + /* + * boot-on is required along with always-on as the + * regulator framework doesn't enable the regulator + * if boot-on is not there. + */ + regulator-always-on; + regulator-boot-on; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb1_reset>; + vcc-supply = <&hsusb1_power>; + /** + * FIXME: + * put the right clock phandle here when available + * clocks = <&auxclk3>; + * clock-names = "main_clk"; + */ + clock-frequency = <19200000>; + }; }; &omap4_pmx_wkup { @@ -64,7 +117,7 @@ twl6030_wkup_pins: pinmux_twl6030_wkup_pins { pinctrl-single,pins = < - 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ >; }; }; @@ -78,81 +131,108 @@ &mcbsp1_pins &dss_hdmi_pins &tpd12s015_pins + &hsusbb1_pins >; twl6030_pins: pinmux_twl6030_pins { pinctrl-single,pins = < - 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ >; }; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ + 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ + 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + >; + }; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ - 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ - 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ - 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ - 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; +}; + +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ >; }; }; @@ -165,18 +245,18 @@ twl: twl@48 { reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + /* IRQ# = 7 */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; twl6040: twl@4b { compatible = "ti,twl6040"; reg = <0x4b>; - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + /* IRQ# = 119 */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; @@ -184,7 +264,7 @@ }; }; -/include/ "twl6030.dtsi" +#include "twl6030.dtsi" &i2c2 { pinctrl-names = "default"; @@ -269,3 +349,11 @@ mode = <3>; power = <50>; }; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index f1d8c21..56c4354 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -7,8 +7,8 @@ */ /dts-v1/; -/include/ "omap4460.dtsi" -/include/ "omap4-panda-common.dtsi" +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { @@ -29,8 +29,36 @@ /* PandaboardES has external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ - 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index f8b221f..6189a8b 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -7,5 +7,5 @@ */ /dts-v1/; -/include/ "omap443x.dtsi" -/include/ "omap4-panda-common.dtsi" +#include "omap443x.dtsi" +#include "omap4-panda-common.dtsi" diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts index b4a40ff..aad5dda 100644 --- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -5,13 +5,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-sdp.dts" +#include "omap4-sdp.dts" /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ - 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 98505a2..7951b4e 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -7,8 +7,8 @@ */ /dts-v1/; -/include/ "omap443x.dtsi" -/include/ "elpida_ecb240abacn.dtsi" +#include "omap443x.dtsi" +#include "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -41,42 +41,42 @@ compatible = "gpio-leds"; debug0 { label = "omap4:green:debug0"; - gpios = <&gpio2 29 0>; /* 61 */ + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ }; debug1 { label = "omap4:green:debug1"; - gpios = <&gpio1 30 0>; /* 30 */ + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ }; debug2 { label = "omap4:green:debug2"; - gpios = <&gpio1 7 0>; /* 7 */ + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ }; debug3 { label = "omap4:green:debug3"; - gpios = <&gpio1 8 0>; /* 8 */ + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ }; debug4 { label = "omap4:green:debug4"; - gpios = <&gpio2 18 0>; /* 50 */ + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ }; user1 { label = "omap4:blue:user"; - gpios = <&gpio6 9 0>; /* 169 */ + gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ }; user2 { label = "omap4:red:user"; - gpios = <&gpio6 10 0>; /* 170 */ + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ }; user3 { label = "omap4:green:user"; - gpios = <&gpio5 11 0>; /* 139 */ + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ }; }; @@ -150,7 +150,7 @@ twl6030_wkup_pins: pinmux_twl6030_wkup_pins { pinctrl-single,pins = < - 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ >; }; }; @@ -170,129 +170,129 @@ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ - 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ - 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ - 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ - 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ - 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ - 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ - 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ + 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ + 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ >; }; twl6030_pins: pinmux_twl6030_pins { pinctrl-single,pins = < - 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ >; }; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ + 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; dmic_pins: pinmux_dmic_pins { pinctrl-single,pins = < - 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */ - 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */ - 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */ - 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ + 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ + 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ + 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < - 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */ - 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */ - 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */ - 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ + 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ + 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ + 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ + 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */ - 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */ - 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */ - 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/ + 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ >; }; dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ + 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ - 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ - 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ - 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ - 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; }; @@ -306,7 +306,7 @@ twl: twl@48 { reg = <0x48>; /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; @@ -314,7 +314,7 @@ compatible = "ti,twl6040"; reg = <0x4b>; /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ @@ -336,7 +336,7 @@ }; }; -/include/ "twl6030.dtsi" +#include "twl6030.dtsi" &i2c2 { pinctrl-names = "default"; @@ -395,7 +395,7 @@ spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; - interrupts = <2 8>; /* gpio line 34, low triggered */ + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ vdd-supply = <&vdd_eth>; }; }; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 7e04103..b41269e 100644 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap443x.dtsi" +#include "omap443x.dtsi" / { model = "Variscite OMAP4 SOM"; @@ -34,12 +34,12 @@ twl: twl@48 { reg = <0x48>; /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; }; -/include/ "twl6030.dtsi" +#include "twl6030.dtsi" &i2c2 { clock-frequency = <400000>; @@ -68,7 +68,7 @@ spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio6>; - interrupts = <11 8>; /* gpio line 171, low triggered */ + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */ vdd-supply = <&vdd_eth>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2a56428..22d9f2b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -6,15 +6,11 @@ * published by the Free Software Foundation. */ -/* - * Carveout for multimedia usecases - * It should be the last 48MB of the first 512MB memory part - * In theory, it should not even exist. That zone should be reserved - * dynamically during the .reserve callback. - */ -/memreserve/ 0x9d000000 0x03000000; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/omap.h> -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "ti,omap4430", "ti,omap4"; @@ -28,13 +24,20 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; next-level-cache = <&L2>; + reg = <0x0>; }; cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; next-level-cache = <&L2>; + reg = <0x1>; }; }; @@ -56,7 +59,7 @@ local-timer@0x48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x20>; - interrupts = <1 13 0x304>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; }; /* @@ -97,8 +100,8 @@ reg = <0x44000000 0x1000>, <0x44800000 0x2000>, <0x45000000 0x1000>; - interrupts = <0 9 0x4>, - <0 10 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; counter32k: counter@4a304000 { compatible = "ti,omap-counter32k"; @@ -126,10 +129,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = <0 12 0x4>, - <0 13 0x4>, - <0 14 0x4>, - <0 15 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -138,7 +141,7 @@ gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; reg = <0x4a310000 0x200>; - interrupts = <0 29 0x4>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio1"; ti,gpio-always-on; gpio-controller; @@ -150,7 +153,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = <0 30 0x4>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -161,7 +164,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = <0 31 0x4>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -172,7 +175,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = <0 32 0x4>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -183,7 +186,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = <0 33 0x4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -194,7 +197,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = <0 34 0x4>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -207,7 +210,7 @@ reg = <0x50000000 0x1000>; #address-cells = <2>; #size-cells = <1>; - interrupts = <0 20 0x4>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; @@ -216,7 +219,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <0 72 0x4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -224,7 +227,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <0 73 0x4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -232,7 +235,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <0 74 0x4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -240,7 +243,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <0 70 0x4>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -248,7 +251,7 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = <0 56 0x4>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -257,7 +260,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = <0 57 0x4>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -266,7 +269,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = <0 61 0x4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -275,7 +278,7 @@ i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; reg = <0x48350000 0x100>; - interrupts = <0 62 0x4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -284,7 +287,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = <0 65 0x4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -304,7 +307,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = <0 66 0x4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -319,7 +322,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = <0 91 0x4>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -331,7 +334,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = <0 48 0x4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -343,7 +346,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = <0 83 0x4>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -354,7 +357,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -364,7 +367,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = <0 94 0x4>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -374,7 +377,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = <0 96 0x4>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -384,7 +387,7 @@ mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d5000 0x400>; - interrupts = <0 59 0x4>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc5"; ti,needs-special-reset; dmas = <&sdma 59>, <&sdma 60>; @@ -394,7 +397,7 @@ wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; reg = <0x4a314000 0x80>; - interrupts = <0 80 0x4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "wd_timer2"; }; @@ -403,7 +406,7 @@ reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 112 0x4>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mcpdm"; dmas = <&sdma 65>, <&sdma 66>; @@ -415,7 +418,7 @@ reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 114 0x4>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dmic"; dmas = <&sdma 67>; dma-names = "up_link"; @@ -426,7 +429,7 @@ reg = <0x40122000 0xff>, /* MPU private access */ <0x49022000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 17 0x4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; @@ -440,7 +443,7 @@ reg = <0x40124000 0xff>, /* MPU private access */ <0x49024000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 22 0x4>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; @@ -454,7 +457,7 @@ reg = <0x40126000 0xff>, /* MPU private access */ <0x49026000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; @@ -467,7 +470,7 @@ compatible = "ti,omap4-mcbsp"; reg = <0x48096000 0xff>; /* L4 Interconnect */ reg-names = "mpu"; - interrupts = <0 16 0x4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; @@ -479,7 +482,7 @@ keypad: keypad@4a31c000 { compatible = "ti,omap4-keypad"; reg = <0x4a31c000 0x80>; - interrupts = <0 120 0x4>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; reg-names = "mpu"; ti,hwmods = "kbd"; }; @@ -487,7 +490,7 @@ emif1: emif@4c000000 { compatible = "ti,emif-4d"; reg = <0x4c000000 0x100>; - interrupts = <0 110 0x4>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "emif1"; phy-type = <1>; hw-caps-read-idle-ctrl; @@ -498,7 +501,7 @@ emif2: emif@4d000000 { compatible = "ti,emif-4d"; reg = <0x4d000000 0x100>; - interrupts = <0 111 0x4>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "emif2"; phy-type = <1>; hw-caps-read-idle-ctrl; @@ -523,7 +526,7 @@ timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; - interrupts = <0 37 0x4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -531,21 +534,21 @@ timer2: timer@48032000 { compatible = "ti,omap3430-timer"; reg = <0x48032000 0x80>; - interrupts = <0 38 0x4>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap4430-timer"; reg = <0x48034000 0x80>; - interrupts = <0 39 0x4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap4430-timer"; reg = <0x48036000 0x80>; - interrupts = <0 40 0x4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer4"; }; @@ -553,7 +556,7 @@ compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; - interrupts = <0 41 0x4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -562,7 +565,7 @@ compatible = "ti,omap4430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; - interrupts = <0 42 0x4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer6"; ti,timer-dsp; }; @@ -571,7 +574,7 @@ compatible = "ti,omap4430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; - interrupts = <0 43 0x4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -580,7 +583,7 @@ compatible = "ti,omap4430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; - interrupts = <0 44 0x4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer8"; ti,timer-pwm; ti,timer-dsp; @@ -589,7 +592,7 @@ timer9: timer@4803e000 { compatible = "ti,omap4430-timer"; reg = <0x4803e000 0x80>; - interrupts = <0 45 0x4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer9"; ti,timer-pwm; }; @@ -597,7 +600,7 @@ timer10: timer@48086000 { compatible = "ti,omap3430-timer"; reg = <0x48086000 0x80>; - interrupts = <0 46 0x4>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer10"; ti,timer-pwm; }; @@ -605,7 +608,7 @@ timer11: timer@48088000 { compatible = "ti,omap4430-timer"; reg = <0x48088000 0x80>; - interrupts = <0 47 0x4>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -613,7 +616,7 @@ usbhstll: usbhstll@4a062000 { compatible = "ti,usbhs-tll"; reg = <0x4a062000 0x1000>; - interrupts = <0 78 0x4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "usb_tll_hs"; }; @@ -629,14 +632,14 @@ compatible = "ti,ohci-omap3", "usb-ohci"; reg = <0x4a064800 0x400>; interrupt-parent = <&gic>; - interrupts = <0 76 0x4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap", "usb-ehci"; reg = <0x4a064c00 0x400>; interrupt-parent = <&gic>; - interrupts = <0 77 0x4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -651,7 +654,7 @@ usb_otg_hs: usb_otg_hs@4a0ab000 { compatible = "ti,omap4-musb"; reg = <0x4a0ab000 0x7ff>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index cccf39a..bcf455e 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -/include/ "omap4.dtsi" +#include "omap4.dtsi" / { cpus { @@ -24,4 +24,10 @@ clock-latency = <300000>; /* From legacy driver */ }; }; + + bandgap { + reg = <0x4a002260 0x4 + 0x4a00232C 0x4>; + compatible = "ti,omap4430-bandgap"; + }; }; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 2cf227c..c2f0f39 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -7,7 +7,7 @@ * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ -/include/ "omap4.dtsi" +#include "omap4.dtsi" / { cpus { @@ -25,8 +25,17 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 54 0x4>, - <0 55 0x4>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "debugss"; }; + + bandgap { + reg = <0x4a002260 0x4 + 0x4a00232C 0x4 + 0x4a002378 0x18>; + compatible = "ti,omap4460-bandgap"; + interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ + gpios = <&gpio3 22 0>; /* tshut */ + }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts deleted file mode 100644 index 982acd1..0000000 --- a/arch/arm/boot/dts/omap5-evm.dts +++ /dev/null @@ -1,261 +0,0 @@ -/* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -/include/ "omap5.dtsi" -/include/ "samsung_k3pe0e000b.dtsi" - -/ { - model = "TI OMAP5 EVM board"; - compatible = "ti,omap5-evm", "ti,omap5"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x7F000000>; /* 2032 MB */ - }; - - vmmcsd_fixed: fixedregulator-mmcsd { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - -}; - -&omap5_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &dmic_pins - &mcbsp1_pins - &mcbsp2_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ - 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */ - 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */ - 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */ - 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */ - >; - }; - - dmic_pins: pinmux_dmic_pins { - pinctrl-single,pins = < - 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */ - 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */ - 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */ - 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */ - 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */ - 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */ - 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */ - 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */ - 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */ - 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ - 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */ - 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */ - 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */ - >; - }; - - i2c4_pins: pinmux_i2c4_pins { - pinctrl-single,pins = < - 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */ - 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */ - 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */ - 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */ - 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/ - 0xc2 0x0 /* MCSPI2_CS MODE0*/ - >; - }; - - mcspi3_pins: pinmux_mcspi3_pins { - pinctrl-single,pins = < - 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ - 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ - 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ - 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ - >; - }; - - mcspi4_pins: pinmux_mcspi4_pins { - pinctrl-single,pins = < - 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ - 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ - 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ - 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ - >; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <4>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - bus-width = <4>; - ti,non-removable; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - status = "disabled"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <400000>; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - clock-frequency = <400000>; - - /* Pressure Sensor */ - bmp085@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - }; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - - clock-frequency = <400000>; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins>; - - clock-frequency = <400000>; - - /* Temperature Sensor */ - tmp102@48{ - compatible = "ti,tmp102"; - reg = <0x48>; - }; -}; - -&i2c5 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - - clock-frequency = <400000>; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = <0x02020073 /* VOLUP */ - 0x02030072 /* VOLDOWM */ - 0x020400e7 /* SEND */ - 0x02050066 /* HOME */ - 0x0206006b /* END */ - 0x020700d9>; /* SEARCH */ - linux,input-no-autorepeat; -}; - -&mcbsp3 { - status = "disabled"; -}; - -&emif1 { - cs1-used; - device-handle = <&samsung_K3PE0E000B>; -}; - -&emif2 { - cs1-used; - device-handle = <&samsung_K3PE0E000B>; -}; - -&mcspi1 { - -}; - -&mcspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; -}; - -&mcspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi3_pins>; -}; - -&mcspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi4_pins>; -}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts new file mode 100644 index 0000000..08b7267 --- /dev/null +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -0,0 +1,485 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "TI OMAP5 uEVM board"; + compatible = "ti,omap5-uevm", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7F000000>; /* 2032 MB */ + }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + /* HS USB Port 2 RESET */ + hsusb2_reset: hsusb2_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb2_reset>; + /** + * FIXME + * Put the right clock phandle here when available + * clocks = <&auxclk1>; + * clock-names = "main_clk"; + */ + clock-frequency = <19200000>; + }; + + /* HS USB Port 3 RESET */ + hsusb3_reset: hsusb3_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb3_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb3_reset>; + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + &usbhost_pins + &led_gpio_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ + 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ + 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */ + 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */ + 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */ + 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ + 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ + 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ + 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ + 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ + 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ + 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ + 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ + 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ + 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ + 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ + 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ + 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ + 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ + 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ + >; + }; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ + 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ + 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ + 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ + 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ + 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ + >; + }; + +}; + +&omap5_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_wkup_pins + >; + + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { + pinctrl-single,pins = < + 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + regulator-name = "smps6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + regulator-name = "smps9"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-always-on; + regulator-boot-on; + ti,smps-range = <0x80>; + }; + + smps10_reg: smps10 { + regulator-name = "smps10"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + + clock-frequency = <400000>; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 635cae2..e643620 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,15 +7,11 @@ * Based on "omap4.dtsi" */ -/* - * Carveout for multimedia usecases - * It should be the last 48MB of the first 512MB memory part - * In theory, it should not even exist. That zone should be reserved - * dynamically during the .reserve callback. - */ -/memreserve/ 0x9d000000 0x03000000; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/omap.h> -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { #address-cells = <1>; @@ -34,21 +30,28 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a15"; + reg = <0x0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a15"; + reg = <0x1>; }; }; timer { compatible = "arm,armv7-timer"; - /* PPI secure/nonsecure IRQ, active low level-sensitive */ - interrupts = <1 13 0x308>, - <1 14 0x308>, - <1 11 0x308>, - <1 10 0x308>; + /* PPI secure/nonsecure IRQ */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <6144000>; }; @@ -90,8 +93,8 @@ reg = <0x44000000 0x2000>, <0x44800000 0x3000>, <0x45000000 0x4000>; - interrupts = <0 9 0x4>, - <0 10 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; counter32k: counter@4ae04000 { compatible = "ti,omap-counter32k"; @@ -119,10 +122,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = <0 12 0x4>, - <0 13 0x4>, - <0 14 0x4>, - <0 15 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -131,7 +134,7 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = <0 29 0x4>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio1"; ti,gpio-always-on; gpio-controller; @@ -143,7 +146,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = <0 30 0x4>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -154,7 +157,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = <0 31 0x4>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -165,7 +168,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = <0 32 0x4>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -176,7 +179,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = <0 33 0x4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -187,7 +190,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = <0 34 0x4>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -198,7 +201,7 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = <0 35 0x4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -209,7 +212,7 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = <0 121 0x4>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -222,7 +225,7 @@ reg = <0x50000000 0x1000>; #address-cells = <2>; #size-cells = <1>; - interrupts = <0 20 0x4>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; @@ -231,7 +234,7 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = <0 56 0x4>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -240,7 +243,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = <0 57 0x4>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -249,7 +252,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = <0 61 0x4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -258,7 +261,7 @@ i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = <0 62 0x4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -267,7 +270,7 @@ i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = <0 60 0x4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -276,7 +279,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = <0 65 0x4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -296,7 +299,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = <0 66 0x4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -311,7 +314,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = <0 91 0x4>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -323,7 +326,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = <0 48 0x4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -335,7 +338,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <0 72 0x4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -343,7 +346,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <0 73 0x4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -351,7 +354,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <0 74 0x4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -359,7 +362,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <0 70 0x4>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -367,7 +370,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <0 105 0x4>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -375,7 +378,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <0 106 0x4>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -383,7 +386,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = <0 83 0x4>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -394,7 +397,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -404,7 +407,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = <0 94 0x4>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -414,7 +417,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = <0 96 0x4>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -424,7 +427,7 @@ mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d5000 0x400>; - interrupts = <0 59 0x4>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc5"; ti,needs-special-reset; dmas = <&sdma 59>, <&sdma 60>; @@ -442,7 +445,7 @@ reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 112 0x4>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mcpdm"; dmas = <&sdma 65>, <&sdma 66>; @@ -454,7 +457,7 @@ reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 114 0x4>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dmic"; dmas = <&sdma 67>; dma-names = "up_link"; @@ -465,7 +468,7 @@ reg = <0x40122000 0xff>, /* MPU private access */ <0x49022000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 17 0x4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; @@ -479,7 +482,7 @@ reg = <0x40124000 0xff>, /* MPU private access */ <0x49024000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 22 0x4>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; @@ -493,7 +496,7 @@ reg = <0x40126000 0xff>, /* MPU private access */ <0x49026000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; @@ -505,7 +508,7 @@ timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = <0 37 0x4>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -513,21 +516,21 @@ timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = <0 38 0x4>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = <0 39 0x4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = <0 40 0x4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer4"; }; @@ -535,7 +538,7 @@ compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; - interrupts = <0 41 0x4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer5"; ti,timer-dsp; ti,timer-pwm; @@ -545,7 +548,7 @@ compatible = "ti,omap5430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; - interrupts = <0 42 0x4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -555,7 +558,7 @@ compatible = "ti,omap5430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; - interrupts = <0 43 0x4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -564,7 +567,7 @@ compatible = "ti,omap5430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; - interrupts = <0 44 0x4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -573,7 +576,7 @@ timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = <0 45 0x4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer9"; ti,timer-pwm; }; @@ -581,7 +584,7 @@ timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = <0 46 0x4>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer10"; ti,timer-pwm; }; @@ -589,7 +592,7 @@ timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = <0 47 0x4>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -597,7 +600,7 @@ wdt2: wdt@4ae14000 { compatible = "ti,omap5-wdt", "ti,omap3-wdt"; reg = <0x4ae14000 0x80>; - interrupts = <0 80 0x4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "wd_timer2"; }; @@ -606,7 +609,7 @@ ti,hwmods = "emif1"; phy-type = <2>; /* DDR PHY type: Intelli PHY */ reg = <0x4c000000 0x400>; - interrupts = <0 110 0x4>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; @@ -617,7 +620,7 @@ ti,hwmods = "emif2"; phy-type = <2>; /* DDR PHY type: Intelli PHY */ reg = <0x4d000000 0x400>; - interrupts = <0 111 0x4>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; @@ -635,7 +638,7 @@ compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x1000>; - interrupts = <0 93 4>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -643,7 +646,7 @@ dwc3@4a030000 { compatible = "synopsys,dwc3"; reg = <0x4a030000 0x1000>; - interrupts = <0 92 4>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; tx-fifo-resize; }; @@ -670,5 +673,44 @@ ctrl-module = <&omap_control_usb>; }; }; + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + compatible = "ti,omap5430-bandgap"; + }; }; }; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index f0a8c20..533919e 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -18,13 +18,13 @@ #size-cells = <1>; cpus { - #address-cells = <1>; + #address-cells = <0>; #size-cells = <0>; - cpu@0 { - compatible = "arm,1176jz-s"; + cpu { + compatible = "arm,arm1176jz-s"; + device_type = "cpu"; clock-frequency = <400000000>; - reg = <0>; d-cache-line-size = <32>; d-cache-size = <32768>; i-cache-line-size = <32>; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index daa962d..ab3e800 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -18,13 +18,13 @@ #size-cells = <1>; cpus { - #address-cells = <1>; + #address-cells = <0>; #size-cells = <0>; - cpu@0 { - compatible = "arm,1176jz-s"; + cpu { + compatible = "arm,arm1176jz-s"; + device_type = "cpu"; cpu-clock = <&arm_clk>, "cpu"; - reg = <0>; d-cache-line-size = <32>; d-cache-size = <32768>; i-cache-line-size = <32>; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 3329719..02edd89 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -18,6 +18,8 @@ #size-cells = <0>; cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index f18aad3..a5e90f0 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -23,8 +23,11 @@ }; cpus { - cpu@0 { - compatible = "arm,xscale"; + #address-cells = <0>; + #size-cells = <0>; + cpu { + compatible = "marvell,xscale"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index fde2a33..4ff2019 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -37,12 +37,6 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <1 9 0xf04>; - - gic-cpuif@4 { - compatible = "arm,gic-cpuif"; - cpuif-id = <4>; - cpu = <&cpu0>; - }; }; timer { diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts new file mode 100644 index 0000000..09ea22c --- /dev/null +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -0,0 +1,45 @@ +/* + * Reference Device Tree Source for the armadillo 800 eva board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7740.dtsi" + +/ { + model = "armadillo 800 eva reference"; + compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; + + chosen { + bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + +}; + +&i2c0 { + touchscreen: st1232@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupt-parent = <&irqpin1>; + interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */ + }; +}; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 798fa35..24e9306 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -14,8 +14,129 @@ compatible = "renesas,r8a7740"; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0x0>; }; }; + + gic: interrupt-controller@c2800000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xc2800000 0x1000>, + <0xc2000000 0x1000>; + }; + + /* irqpin0: IRQ0 - IRQ7 */ + irqpin0: irqpin@e6900000 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900000 4>, + <0xe6900010 4>, + <0xe6900020 1>, + <0xe6900040 1>, + <0xe6900060 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + /* irqpin1: IRQ8 - IRQ15 */ + irqpin1: irqpin@e6900004 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + /* irqpin2: IRQ16 - IRQ23 */ + irqpin2: irqpin@e6900008 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900008 4>, + <0xe6900018 4>, + <0xe6900028 1>, + <0xe6900048 1>, + <0xe6900068 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + /* irqpin3: IRQ24 - IRQ31 */ + irqpin3: irqpin@e690000c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe690000c 4>, + <0xe690001c 4>, + <0xe690002c 1>, + <0xe690004c 1>, + <0xe690006c 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + i2c0: i2c@fff20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xfff20000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 201 0x4 + 0 202 0x4 + 0 203 0x4 + 0 204 0x4>; + }; + + i2c1: i2c@e6c20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6c20000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 70 0x4 + 0 71 0x4 + 0 72 0x4 + 0 73 0x4>; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index fe5c6f2..7f146c6 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -48,6 +48,23 @@ <0xf0000100 0x100>; }; + irqpin0: irqpin@fe780010 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xfe78001c 4>, + <0xfe780010 4>, + <0xfe780024 4>, + <0xfe780044 4>, + <0xfe780064 4>; + interrupt-parent = <&gic>; + interrupts = <0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4>; + sense-bitfield-width = <2>; + }; + i2c0: i2c@0xffc70000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7a17110..339d9b1 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -36,12 +36,6 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <1 9 0xf04>; - - gic-cpuif@4 { - compatible = "arm,gic-cpuif"; - cpuif-id = <4>; - cpu = <&cpu0>; - }; }; timer { diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi new file mode 100644 index 0000000..527e319 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -0,0 +1,173 @@ +/* + * Samsung S3C2416 pinctrl settings + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gph-0", "gph-1"; + samsung,pin-function = <2>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gph-8", "gph-9"; + samsung,pin-function = <2>; + }; + + uart1_data: uart1-data { + samsung,pins = "gph-2", "gph-3"; + samsung,pin-function = <2>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gph-10", "gph-11"; + samsung,pin-function = <2>; + }; + + uart2_data: uart2-data { + samsung,pins = "gph-4", "gph-5"; + samsung,pin-function = <2>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + uart3_data: uart3-data { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + extuart_clk: extuart-clk { + samsung,pins = "gph-12"; + samsung,pin-function = <2>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpe-14", "gpe-15"; + samsung,pin-function = <2>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpe-11", "gpe-12", "gpe-13"; + samsung,pin-function = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpe-5"; + samsung,pin-function = <2>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpe-6"; + samsung,pin-function = <2>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpe-7"; + samsung,pin-function = <2>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpe-8", "gpe-9", "gpe-10"; + samsung,pin-function = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpl-8"; + samsung,pin-function = <2>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpl-9"; + samsung,pin-function = <2>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <2>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gpl-1", "gpl-2", "gpl-3"; + samsung,pin-function = <2>; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts new file mode 100644 index 0000000..ad1dd09 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -0,0 +1,72 @@ +/* + * SAMSUNG SMDK2416 board device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "s3c2416.dtsi" + +/ { + model = "SMDK2416"; + compatible = "samsung,s3c2416"; + + memory { + reg = <0x30000000 0x4000000>; + }; + + serial@50000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + }; + + serial@50004000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + }; + + serial@50008000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + }; + + serial@5000C000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + }; + + watchdog@53000000 { + status = "okay"; + }; + + rtc@57000000 { + status = "okay"; + }; + + sdhci@4AC00000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; + }; + + sdhci@4A800000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi new file mode 100644 index 0000000..6809324 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -0,0 +1,79 @@ +/* + * Samsung's S3C2416 SoC device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "s3c24xx.dtsi" +/include/ "s3c2416-pinctrl.dtsi" + +/ { + model = "Samsung S3C2416 SoC"; + compatible = "samsung,s3c2416"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ejs"; + }; + }; + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2416-irq"; + }; + + pinctrl@56000000 { + compatible = "samsung,s3c2416-pinctrl"; + }; + + serial@50000000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50008000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@5000C000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x5000C000 0x4000>; + interrupts = <1 18 24 4>, <1 18 25 4>; + status = "disabled"; + }; + + sdhci@4AC00000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4AC00000 0x100>; + interrupts = <0 0 21 3>; + status = "disabled"; + }; + + sdhci@4A800000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4A800000 0x100>; + interrupts = <0 0 20 3>; + status = "disabled"; + }; + + watchdog@53000000 { + interrupts = <1 9 27 3>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2416-rtc"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2440-i2c"; + }; +}; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi new file mode 100644 index 0000000..cab46ff --- /dev/null +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -0,0 +1,92 @@ +/* + * Samsung's S3C24XX family device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,s3c24xx"; + interrupt-parent = <&intc>; + + aliases { + pinctrl0 = &pinctrl_0; + }; + + intc:interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + pinctrl_0: pinctrl@56000000 { + reg = <0x56000000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c2410-wakeup-eint"; + interrupts = <0 0 0 3>, + <0 0 1 3>, + <0 0 2 3>, + <0 0 3 3>, + <0 0 4 4>, + <0 0 5 4>; + }; + }; + + timer@51000000 { + compatible = "samsung,s3c2410-pwm"; + reg = <0x51000000 0x1000>; + interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; + #pwm-cells = <4>; + }; + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupts = <1 28 0 4>, <1 28 1 4>; + status = "disabled"; + }; + + serial@50004000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + status = "disabled"; + }; + + serial@50008000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50008000 0x4000>; + interrupts = <1 15 6 4>, <1 15 7 4>; + status = "disabled"; + }; + + watchdog@53000000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x53000000 0x100>; + interrupts = <0 0 9 3>; + status = "disabled"; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupts = <0 0 30 3>, <0 0 8 3>; + status = "disabled"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2410-i2c"; + reg = <0x54000000 0x100>; + interrupts = <0 0 27 3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index d592293..a1d5e25 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -9,6 +9,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -38,8 +39,12 @@ ssc1 = &ssc1; }; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a5"; + reg = <0x0>; }; }; @@ -63,7 +68,7 @@ compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 2 0>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; @@ -75,9 +80,12 @@ spi0: spi@f0004000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9x5-spi"; + compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -111,8 +119,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma0 2 7>, - <&dma0 2 8>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; @@ -125,8 +133,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma0 2 9>, - <&dma0 2 10>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -173,7 +181,7 @@ compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma1 2 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; @@ -186,7 +194,7 @@ compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma1 2 1>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; @@ -198,9 +206,12 @@ spi1: spi@f8008000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9x5-spi"; + compatible = "atmel,at91rm9200-spi"; reg = <0xf8008000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(16)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -299,8 +310,8 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma1 2 11>, - <&dma1 2 12>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi index 677fc60..7bf020e 100644 --- a/arch/arm/boot/dts/sh7372.dtsi +++ b/arch/arm/boot/dts/sh7372.dtsi @@ -14,8 +14,13 @@ compatible = "renesas,sh7372"; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0x0>; }; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 5972abb..b6f759e 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -18,6 +18,19 @@ model = "KZM-A9-GT"; compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + cpus { + cpu@0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1196000 1315000 + 598000 1175000 + 398667 1065000 + >; + voltage-tolerance = <1>; /* 1% */ + }; + }; + chosen { bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; }; @@ -59,6 +72,79 @@ }; }; +&i2c0 { + as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + vdd_dvfs: sd1 { + regulator-name = "1.315V CPU"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + sd2 { + regulator-name = "1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo3 { + regulator-name = "3.0V CPU"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + ldo4 { + regulator-name = "2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo5 { + regulator-name = "2.8V #2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo7 { + regulator-name = "1.15V CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + ldo8 { + regulator-name = "1.15V CPU #2"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + &mmcif { bus-width = <8>; vmmc-supply = <®_1p8v>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index ec40bf7..b977502 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -119,7 +119,7 @@ 0 32 0x4>; }; - i2c0: i2c@0xe6820000 { + i2c0: i2c@e6820000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,rmobile-iic"; @@ -131,7 +131,7 @@ 0 170 0x4>; }; - i2c1: i2c@0xe6822000 { + i2c1: i2c@e6822000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,rmobile-iic"; @@ -143,7 +143,7 @@ 0 54 0x4>; }; - i2c2: i2c@0xe6824000 { + i2c2: i2c@e6824000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,rmobile-iic"; @@ -155,7 +155,7 @@ 0 174 0x4>; }; - i2c3: i2c@0xe6826000 { + i2c3: i2c@e6826000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,rmobile-iic"; @@ -167,7 +167,7 @@ 0 186 0x4>; }; - i2c4: i2c@0xe6828000 { + i2c4: i2c@e6828000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,rmobile-iic"; @@ -179,7 +179,7 @@ 0 190 0x4>; }; - mmcif: mmcif@0x10010000 { + mmcif: mmcif@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupt-parent = <&gic>; @@ -189,7 +189,7 @@ status = "disabled"; }; - sdhi0: sdhi@0xee100000 { + sdhi0: sdhi@ee100000 { compatible = "renesas,r8a7740-sdhi"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; @@ -201,7 +201,7 @@ }; /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ - sdhi1: sdhi@0xee120000 { + sdhi1: sdhi@ee120000 { compatible = "renesas,r8a7740-sdhi"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; @@ -212,7 +212,7 @@ status = "disabled"; }; - sdhi2: sdhi@0xee140000 { + sdhi2: sdhi@ee140000 { compatible = "renesas,r8a7740-sdhi"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index db5db24..fb9dce5 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" +#include "dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -82,7 +82,7 @@ }; }; - soc-u9500 { + soc { sound { compatible = "stericsson,snd-soc-mop500"; @@ -99,40 +99,13 @@ status = "okay"; }; - prcmu@80157000 { - thermal@801573c0 { - num-trips = <4>; - - trip0-temp = <70000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <75000>; - trip1-type = "active"; - trip1-cdev-num = <1>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - - trip2-temp = <80000>; - trip2-type = "active"; - trip2-cdev-num = <1>; - trip2-cdev-name0 = "thermal-cpufreq-0"; - - trip3-temp = <85000>; - trip3-type = "critical"; - trip3-cdev-num = <0>; - - status = "okay"; - }; - }; - external-bus@50000000 { status = "okay"; ethernet@0 { compatible = "smsc,lan9115"; reg = <0 0x10000>; - interrupts = <12 0x1>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio4>; vdd33a-supply = <&en_3v3_reg>; vddvario-supply = <&db8500_vape_reg>; @@ -146,13 +119,21 @@ }; }; + vmmci: regulator-gpio { + gpios = <&gpio6 25 0x4>; + enable-gpio = <&gpio7 4 0x4>; + + status = "okay"; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; @@ -163,7 +144,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -197,15 +178,15 @@ }; i2c@80128000 { - lp5521@0x33 { + lp5521@33 { // compatible = "lp5521"; reg = <0x33>; }; - lp5521@0x34 { + lp5521@34 { // compatible = "lp5521"; reg = <0x34>; }; - bh1780@0x29 { + bh1780@29 { // compatible = "rohm,bh1780gli"; reg = <0x33>; }; @@ -298,6 +279,31 @@ }; }; + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + ab8500 { ab8500-gpio { compatible = "stericsson,ab8500-gpio"; @@ -316,7 +322,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -336,7 +342,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 16a6e13..bee62a2 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -23,6 +23,7 @@ aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; serial1 = &uart1; timer0 = &timer0; @@ -94,6 +95,12 @@ compatible = "fixed-clock"; }; + f2s_periph_ref_clk: f2s_periph_ref_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <10000000>; + }; + main_pll: main_pll { #address-cells = <1>; #size-cells = <0>; @@ -235,16 +242,222 @@ reg = <0xD4>; }; }; + + mpu_periph_clk: mpu_periph_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <4>; + }; + + mpu_l2_ram_clk: mpu_l2_ram_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <2>; + }; + + l4_main_clk: l4_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + clk-gate = <0x60 0>; + }; + + l3_main_clk: l3_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + }; + + l3_mp_clk: l3_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 0 2>; + clk-gate = <0x60 1>; + }; + + l3_sp_clk: l3_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 2 2>; + }; + + l4_mp_clk: l4_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 4 3>; + clk-gate = <0x60 2>; + }; + + l4_sp_clk: l4_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 7 3>; + clk-gate = <0x60 3>; + }; + + dbg_at_clk: dbg_at_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 0 2>; + clk-gate = <0x60 4>; + }; + + dbg_clk: dbg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 2 2>; + clk-gate = <0x60 5>; + }; + + dbg_trace_clk: dbg_trace_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x6C 0 3>; + clk-gate = <0x60 6>; + }; + + dbg_timer_clk: dbg_timer_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + clk-gate = <0x60 7>; + }; + + cfg_clk: cfg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_s2f_usr0_clk>; + clk-gate = <0x60 8>; + }; + + s2f_user0_clk: s2f_user0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_s2f_usr0_clk>; + clk-gate = <0x60 9>; + }; + + emac_0_clk: emac_0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac0_clk>; + clk-gate = <0xa0 0>; + }; + + emac_1_clk: emac_1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac1_clk>; + clk-gate = <0xa0 1>; + }; + + usb_mp_clk: usb_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 2>; + div-reg = <0xa4 0 3>; + }; + + spi_m_clk: spi_m_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 3>; + div-reg = <0xa4 3 3>; + }; + + can0_clk: can0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 4>; + div-reg = <0xa4 6 3>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 5>; + div-reg = <0xa4 9 3>; + }; + + gpio_db_clk: gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 6>; + div-reg = <0xa8 0 24>; + }; + + s2f_user1_clk: s2f_user1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&s2f_usr1_clk>; + clk-gate = <0xa0 7>; + }; + + sdmmc_clk: sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 8>; + }; + + nand_x_clk: nand_x_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 9>; + }; + + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 10>; + fixed-divider = <4>; + }; + + qspi_clk: qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; + clk-gate = <0xa0 11>; + }; }; }; - gmac0: stmmac@ff700000 { + gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ - phy-mode = "gmii"; + clocks = <&emac0_clk>; + clock-names = "stmmaceth"; + status = "disabled"; + }; + + gmac1: ethernet@ff702000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0xff702000 0x2000>; + interrupts = <0 120 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ + clocks = <&emac1_clk>; + clock-names = "stmmaceth"; + status = "disabled"; }; L2: l2-cache@fffef000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts index 2495958..973999d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -32,6 +32,13 @@ reg = <0x0 0x40000000>; /* 1GB */ }; + aliases { + /* this allow the ethaddr uboot environmnet variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; + soc { clkmgr@ffd04000 { clocks { @@ -41,6 +48,12 @@ }; }; + ethernet@ff702000 { + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + status = "okay"; + }; + timer0@ffc08000 { clock-frequency = <100000000>; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 0bf035d..d1ec0ca 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -41,6 +41,11 @@ }; }; + ethernet@ff700000 { + phy-mode = "gmii"; + status = "okay"; + }; + timer0@ffc08000 { clock-frequency = <7000000>; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 45597fd..4382547 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -22,12 +22,14 @@ cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; }; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index c2a852d..f0e3fcf 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -17,8 +17,12 @@ interrupt-parent = <&vic>; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 19f99dc..9f60a7b 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -15,8 +15,12 @@ compatible = "st,spear600"; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 6f82d93..16c3888 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -22,6 +22,49 @@ }; }; + src@101e0000 { + /* These chrystal drivers are not used on this board */ + disable-sxtalo; + disable-mxtalo; + }; + + pinctrl { + /* Hog CD pins */ + pinctrl-names = "default"; + pinctrl-0 = <&cd_default_mode>; + + mmcsd-cd { + cd_default_mode: cd_default { + cd_default_cfg1 { + /* CD input GPIO */ + ste,pins = "GPIO111_H21"; + ste,input = <0>; + }; + cd_default_cfg2 { + /* CD GPIO biasing */ + ste,pins = "GPIO112_J21"; + ste,output = <0>; + }; + }; + }; + user-led { + user_led_default_mode: user_led_default { + user_led_default_cfg { + ste,pins = "GPIO2_C5"; + ste,output = <1>; + }; + }; + }; + user-button { + user_button_default_mode: user_button_default { + user_button_default_cfg { + ste,pins = "GPIO3_A4"; + ste,input = <0>; + }; + }; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ @@ -33,4 +76,30 @@ gpios = <&gpio3 16 0x1>; }; }; + + /* The user LED on the board is set up to be used for heartbeat */ + leds { + compatible = "gpio-leds"; + user-led { + label = "user_led"; + gpios = <&gpio0 2 0x1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_default_mode>; + }; + }; + + /* User key mapped in as "escape" */ + gpio-keys { + compatible = "gpio-keys"; + user-button { + label = "user_button"; + gpios = <&gpio0 3 0x1>; + linux,code = <1>; /* KEY_ESC */ + gpio-key,wakeup; + pinctrl-names = "default"; + pinctrl-0 = <&user_button_default_mode>; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 4a4aab3..a3acfa7 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -21,18 +21,23 @@ cache-level = <2>; }; - mtu0 { + mtu0: mtu@101e2000 { /* Nomadik system timer */ + compatible = "st,nomadik-mtu"; reg = <0x101e2000 0x1000>; interrupt-parent = <&vica>; interrupts = <4>; + clocks = <&timclk>, <&pclk>; + clock-names = "timclk", "apb_pclk"; }; - mtu1 { + mtu1: mtu@101e3000 { /* Secondary timer */ reg = <0x101e3000 0x1000>; interrupt-parent = <&vica>; interrupts = <5>; + clocks = <&timclk>, <&pclk>; + clock-names = "timclk", "apb_pclk"; }; gpio0: gpio@101e4000 { @@ -45,6 +50,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; + clocks = <&pclk>; }; gpio1: gpio@101e5000 { @@ -57,6 +63,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; + clocks = <&pclk>; }; gpio2: gpio@101e6000 { @@ -69,6 +76,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; + clocks = <&pclk>; }; gpio3: gpio@101e7000 { @@ -81,10 +89,544 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; + clocks = <&pclk>; }; pinctrl { - compatible = "stericsson,nmk-pinctrl-stn8815"; + compatible = "stericsson,stn8815-pinctrl"; + /* Pin configurations */ + uart0 { + uart0_default_mux: uart0_mux { + u0_default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + }; + }; + uart1 { + uart1_default_mux: uart1_mux { + u1_default_mux { + ste,function = "u1"; + ste,pins = "u1_a_1"; + }; + }; + }; + mmcsd { + mmcsd_default_mux: mmcsd_mux { + mmcsd_default_mux { + ste,function = "mmcsd"; + ste,pins = "mmcsd_a_1"; + }; + }; + mmcsd_default_mode: mmcsd_default { + mmcsd_default_cfg1 { + /* MCCLK */ + ste,pins = "GPIO8_B10"; + ste,output = <0>; + }; + mmcsd_default_cfg2 { + /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */ + ste,pins = "GPIO10_C11", "GPIO15_A12", + "GPIO16_C13"; + ste,output = <1>; + }; + mmcsd_default_cfg3 { + /* MCCMD, MCDAT3-0, MCMSFBCLK */ + ste,pins = "GPIO9_A10", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", + "GPIO14_B12", "GPIO24_C15"; + ste,input = <1>; + }; + }; + }; + i2c0 { + i2c0_default_mode: i2c0_default { + i2c0_default_cfg { + ste,pins = "GPIO62_D3", "GPIO63_D2"; + ste,input = <1>; + }; + }; + }; + i2c1 { + i2c1_default_mode: i2c1_default { + i2c1_default_cfg { + ste,pins = "GPIO53_L4", "GPIO54_L3"; + ste,input = <1>; + }; + }; + }; + i2c2 { + i2c2_default_mode: i2c2_default { + i2c2_default_cfg { + ste,pins = "GPIO73_C21", "GPIO74_C20"; + ste,input = <1>; + }; + }; + }; + }; + + src: src@101e0000 { + compatible = "stericsson,nomadik-src"; + reg = <0x101e0000 0x1000>; + disable-sxtalo; + disable-mxtalo; + + /* + * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz + * that is parent of TIMCLK, PLL1 and PLL2 + */ + mxtal: mxtal@19.2M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + /* + * The 2.4 MHz TIMCLK reference clock is active at + * boot time, this is actually the MXTALCLK @19.2 MHz + * divided by 8. This clock is used by the timers and + * watchdog. See page 105 ff. + */ + timclk: timclk@2.4M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&mxtal>; + }; + + /* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */ + pll1: pll1@0 { + #clock-cells = <0>; + compatible = "st,nomadik-pll-clock"; + pll-id = <1>; + clocks = <&mxtal>; + }; + + /* HCLK divides the PLL1 with 1,2,3 or 4 */ + hclk: hclk@0 { + #clock-cells = <0>; + compatible = "st,nomadik-hclk-clock"; + clocks = <&pll1>; + }; + /* The PCLK domain uses HCLK right off */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&hclk>; + }; + + /* PLL2 is usually 864 MHz and divided into a few fixed rates */ + pll2: pll2@0 { + #clock-cells = <0>; + compatible = "st,nomadik-pll-clock"; + pll-id = <2>; + clocks = <&mxtal>; + }; + clk216: clk216@216M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll2>; + }; + clk108: clk108@108M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&clk216>; + }; + clk72: clk72@72M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + /* The data sheet does not say how this is derived */ + clock-div = <12>; + clock-mult = <1>; + clocks = <&pll2>; + }; + clk48: clk48@48M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + /* The data sheet does not say how this is derived */ + clock-div = <18>; + clock-mult = <1>; + clocks = <&pll2>; + }; + clk27: clk27@27M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&clk108>; + }; + + /* This apparently exists as well */ + ulpiclk: ulpiclk@60M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + /* + * IP AMBA bus clocks, driving the bus side of the + * peripheral clocking, clock gates. + */ + + hclkdma0: hclkdma0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <0>; + clocks = <&hclk>; + }; + hclksmc: hclksmc@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <1>; + clocks = <&hclk>; + }; + hclksdram: hclksdram@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <2>; + clocks = <&hclk>; + }; + hclkdma1: hclkdma1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <3>; + clocks = <&hclk>; + }; + hclkclcd: hclkclcd@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <4>; + clocks = <&hclk>; + }; + pclkirda: pclkirda@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <5>; + clocks = <&pclk>; + }; + pclkssp: pclkssp@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <6>; + clocks = <&pclk>; + }; + pclkuart0: pclkuart0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <7>; + clocks = <&pclk>; + }; + pclksdi: pclksdi@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <8>; + clocks = <&pclk>; + }; + pclki2c0: pclki2c0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <9>; + clocks = <&pclk>; + }; + pclki2c1: pclki2c1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <10>; + clocks = <&pclk>; + }; + pclkuart1: pclkuart1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <11>; + clocks = <&pclk>; + }; + pclkmsp0: pclkmsp0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <12>; + clocks = <&pclk>; + }; + hclkusb: hclkusb@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <13>; + clocks = <&hclk>; + }; + hclkdif: hclkdif@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <14>; + clocks = <&hclk>; + }; + hclksaa: hclksaa@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <15>; + clocks = <&hclk>; + }; + hclksva: hclksva@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <16>; + clocks = <&hclk>; + }; + pclkhsi: pclkhsi@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <17>; + clocks = <&pclk>; + }; + pclkxti: pclkxti@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <18>; + clocks = <&pclk>; + }; + pclkuart2: pclkuart2@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <19>; + clocks = <&pclk>; + }; + pclkmsp1: pclkmsp1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <20>; + clocks = <&pclk>; + }; + pclkmsp2: pclkmsp2@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <21>; + clocks = <&pclk>; + }; + pclkowm: pclkowm@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <22>; + clocks = <&pclk>; + }; + hclkhpi: hclkhpi@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <23>; + clocks = <&hclk>; + }; + pclkske: pclkske@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <24>; + clocks = <&pclk>; + }; + pclkhsem: pclkhsem@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <25>; + clocks = <&pclk>; + }; + hclk3d: hclk3d@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <26>; + clocks = <&hclk>; + }; + hclkhash: hclkhash@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <27>; + clocks = <&hclk>; + }; + hclkcryp: hclkcryp@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <28>; + clocks = <&hclk>; + }; + pclkmshc: pclkmshc@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <29>; + clocks = <&pclk>; + }; + hclkusbm: hclkusbm@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <30>; + clocks = <&hclk>; + }; + hclkrng: hclkrng@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <31>; + clocks = <&hclk>; + }; + + /* IP kernel clocks */ + clcdclk: clcdclk@0 { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <36>; + clocks = <&clk72 &clk48>; + }; + irdaclk: irdaclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <37>; + clocks = <&clk48>; + }; + sspiclk: sspiclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <38>; + clocks = <&clk48>; + }; + uart0clk: uart0clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <39>; + clocks = <&clk48>; + }; + sdiclk: sdiclk@48M { + /* Also called MCCLK in some documents */ + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <40>; + clocks = <&clk48>; + }; + i2c0clk: i2c0clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <41>; + clocks = <&clk48>; + }; + i2c1clk: i2c1clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <42>; + clocks = <&clk48>; + }; + uart1clk: uart1clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <43>; + clocks = <&clk48>; + }; + mspclk0: mspclk0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <44>; + clocks = <&clk48>; + }; + usbclk: usbclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <45>; + clocks = <&clk48>; /* 48 MHz not ULPI */ + }; + difclk: difclk@72M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <46>; + clocks = <&clk72>; + }; + ipi2cclk: ipi2cclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <47>; + clocks = <&clk48>; /* Guess */ + }; + ipbmcclk: ipbmcclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <48>; + clocks = <&clk48>; /* Guess */ + }; + hsiclkrx: hsiclkrx@216M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <49>; + clocks = <&clk216>; + }; + hsiclktx: hsiclktx@108M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <50>; + clocks = <&clk108>; + }; + uart2clk: uart2clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <51>; + clocks = <&clk48>; + }; + mspclk1: mspclk1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <52>; + clocks = <&clk48>; + }; + mspclk2: mspclk2@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <53>; + clocks = <&clk48>; + }; + owmclk: owmclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <54>; + clocks = <&clk48>; /* Guess */ + }; + skeclk: skeclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <56>; + clocks = <&clk48>; /* Guess */ + }; + x3dclk: x3dclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <58>; + clocks = <&clk48>; /* Guess */ + }; + pclkmsp3: pclkmsp3@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <59>; + clocks = <&pclk>; + }; + mspclk3: mspclk3@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <60>; + clocks = <&clk48>; + }; + mshcclk: mshcclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <61>; + clocks = <&clk48>; /* Guess */ + }; + usbmclk: usbmclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <62>; + /* Stated as "48 MHz not ULPI clock" */ + clocks = <&clk48>; + }; + rngcclk: rngcclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <63>; + clocks = <&clk48>; /* Guess */ + }; }; /* A NAND flash of 128 MiB */ @@ -97,6 +639,7 @@ <0x41000000 0x2000>, /* NAND Base ADDR */ <0x40800000 0x2000>; /* NAND Base CMD */ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + clocks = <&hclksmc>; status = "okay"; partition@0 { @@ -144,6 +687,8 @@ <&gpio1 30 0>; /* scl */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default_mode>; stw4811@2d { compatible = "st,stw4811"; @@ -158,6 +703,8 @@ <&gpio1 21 0>; /* scl */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default_mode>; camera@2d { compatible = "st,camera"; @@ -180,6 +727,9 @@ <&gpio2 9 0>; /* scl */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default_mode>; + stw4811@2d { compatible = "st,stw4811-usb"; reg = <0x2d>; @@ -211,6 +761,10 @@ reg = <0x101fd000 0x1000>; interrupt-parent = <&vica>; interrupts = <12>; + clocks = <&uart0clk>, <&pclkuart0>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_default_mux>; }; uart1: uart@101fb000 { @@ -218,6 +772,10 @@ reg = <0x101fb000 0x1000>; interrupt-parent = <&vica>; interrupts = <17>; + clocks = <&uart1clk>, <&pclkuart1>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_default_mux>; }; uart2: uart@101f2000 { @@ -225,17 +783,23 @@ reg = <0x101f2000 0x1000>; interrupt-parent = <&vica>; interrupts = <28>; + clocks = <&uart2clk>, <&pclkuart2>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; rng: rng@101b0000 { compatible = "arm,primecell"; reg = <0x101b0000 0x1000>; + clocks = <&rngcclk>, <&hclkrng>; + clock-names = "rng", "apb_pclk"; }; rtc: rtc@101e8000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x101e8000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; interrupt-parent = <&vica>; interrupts = <10>; }; @@ -243,6 +807,8 @@ mmcsd: sdi@101f6000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x101f6000 0x1000>; + clocks = <&sdiclk>, <&pclksdi>; + clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; max-frequency = <48000000>; @@ -251,6 +817,8 @@ mmc-cap-sd-highspeed; cd-gpios = <&gpio3 15 0x1>; cd-inverted; + pinctrl-names = "default"; + pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; }; }; }; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index 615392a..524e332 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -9,13 +9,15 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/interrupt-controller/irq.h> + / { - soc-u9500 { + soc { i2c@80004000 { stmpe1601: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; - interrupts = <26 0x2>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio6>; interrupt-controller; @@ -52,26 +54,26 @@ }; i2c@80110000 { - bu21013_tp@0x5c { - compatible = "rhom,bu21013_tp"; + bu21013_tp@5c { + compatible = "rohm,bu21013_tp"; reg = <0x5c>; touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; - rhom,touch-max-x = <384>; - rhom,touch-max-y = <704>; - rhom,flip-y; + rohm,touch-max-x = <384>; + rohm,touch-max-y = <704>; + rohm,flip-y; }; - bu21013_tp@0x5d { - compatible = "rhom,bu21013_tp"; + bu21013_tp@5d { + compatible = "rohm,bu21013_tp"; reg = <0x5d>; touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; - rhom,touch-max-x = <384>; - rhom,touch-max-y = <704>; - rhom,flip-y; + rohm,touch-max-x = <384>; + rohm,touch-max-y = <704>; + rohm,flip-y; }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index b70fe0d..0e22a28 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -41,6 +41,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e7ef619..82e03d2 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -16,8 +16,12 @@ interrupt-parent = <&intc>; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a8"; + reg = <0x0>; }; }; @@ -173,8 +177,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; + interrupts = <28>; clocks = <&apb0_gates 5>; gpio-controller; + interrupt-controller; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; @@ -199,6 +205,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -292,5 +319,32 @@ clocks = <&apb1_gates 23>; status = "disabled"; }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts new file mode 100644 index 0000000..64dc0c4 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a10s.dtsi" + +/ { + model = "Olimex A10s-Olinuxino Micro"; + compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; + + soc@01c20000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + pinctrl@01c20800 { + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PE3"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart2: serial@01c28800 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; + + green { + label = "a10s-olinuxino-micro:green:usr"; + gpios = <&pio 4 3 0>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi new file mode 100644 index 0000000..2307ce8 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -0,0 +1,286 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + }; + + axi_gates: axi_gates@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + }; + + ahb_gates: ahb_gates@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", + "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", + "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", + "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", + "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + }; + + apb0_gates: apb0_gates@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + + /* dummy is pll62 */ + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&dummy>, <&osc32k>; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + }; + + apb1_gates: apb1_gates@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_can", "apb1_scr", + "apb1_ps20", "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5", "apb1_uart6", + "apb1_uart7"; + }; + }; + + soc@01c20000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + status = "disabled"; + }; + + mdio@01c0b080 { + compatible = "allwinner,sun4i-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun5i-a10s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB19", "PB20"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart2_pins_a: uart2@0 { + allwinner,pins = "PC18", "PC19"; + allwinner,function = "uart2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 3ca5506..80497e3 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -37,6 +37,24 @@ pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 31fa38f..7363211 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -17,8 +17,12 @@ interrupt-parent = <&intc>; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a8"; + reg = <0x0>; }; }; @@ -95,20 +99,15 @@ ahb_gates: ahb_gates@01c20060 { #clock-cells = <1>; - compatible = "allwinner,sun4i-ahb-gates-clk"; + compatible = "allwinner,sun5i-a13-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", - "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", - "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", - "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", - "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", - "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", - "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", + "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", + "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer", + "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; apb0: apb0@01c20054 { @@ -120,15 +119,13 @@ apb0_gates: apb0_gates@01c20068 { #clock-cells = <1>; - compatible = "allwinner,sun4i-apb0-gates-clk"; + compatible = "allwinner,sun5i-a13-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", - "apb0_ir1", "apb0_keypad"; + clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - /* dummy is pll62 */ + /* dummy is pll6 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; @@ -145,15 +142,11 @@ apb1_gates: apb1_gates@01c2006c { #clock-cells = <1>; - compatible = "allwinner,sun4i-apb1-gates-clk"; + compatible = "allwinner,sun5i-a13-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_can", "apb1_scr", - "apb1_ps20", "apb1_ps21", "apb1_uart0", - "apb1_uart1", "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5", "apb1_uart6", - "apb1_uart7"; + "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; }; @@ -174,8 +167,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; + interrupts = <28>; clocks = <&apb0_gates 5>; gpio-controller; + interrupt-controller; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; @@ -193,6 +188,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -226,5 +242,32 @@ clocks = <&apb1_gates 19>; status = "disabled"; }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 72c1f27..cb640eb 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra114.dtsi" +#include "tegra114.dtsi" / { model = "NVIDIA Tegra114 Dalmore evaluation board"; @@ -727,6 +727,16 @@ battery-name = "battery"; sbs,i2c-retry-count = <2>; sbs,poll-retry-count = <100>; + power-supplies = <&charger>; + }; + + rt5640: rt5640 { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; }; @@ -748,7 +758,7 @@ compatible = "ti,tps65090"; reg = <0x48>; interrupt-parent = <&gpio>; - interrupts = <72 0x04>; /* gpio PJ0 */ + interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>; vsys1-supply = <&vdd_ac_bat_reg>; vsys2-supply = <&vdd_ac_bat_reg>; @@ -763,6 +773,11 @@ vsys-l1-supply = <&vdd_ac_bat_reg>; vsys-l2-supply = <&vdd_ac_bat_reg>; + charger: charger { + compatible = "ti,tps65090-charger"; + ti,enable-low-current-chrg; + }; + regulators { tps65090_dcdc1_reg: dcdc1 { regulator-name = "vdd-sys-5v0"; @@ -823,12 +838,28 @@ }; }; + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; + pmc { nvidia,invert-interrupt; }; + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + sdhci@78000400 { - cd-gpios = <&gpio 170 1>; /* gpio PV2 */ + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; @@ -873,7 +904,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; enable-active-high; - gpio = <&gpio 61 0>; /* GPIO PH5 */ + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; lcd_bl_en_reg: regulator@2 { @@ -883,7 +914,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 58 0>; /* GPIO PH2 */ + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@3 { @@ -893,7 +924,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 108 0>; /* GPIO PN4 */ + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -905,7 +936,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 86 0>; /* GPIO PK6 */ + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -917,8 +948,32 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 81 0>; /* GPIO PK1 */ + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-dalmore", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Dalmore"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Speakers", "SPORP", + "Speakers", "SPORN", + "Speakers", "SPOLP", + "Speakers", "SPOLN"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA114_CLK_PLL_A>, + <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA114_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts index 6bbc8ef..d5f8d3e 100644 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra114.dtsi" +#include "tegra114.dtsi" / { model = "NVIDIA Tegra114 Pluto evaluation board"; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 629415f..abf6c40d 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -1,4 +1,8 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/clock/tegra114-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" / { compatible = "nvidia,tegra114"; @@ -19,19 +23,20 @@ <0x50042000 0x1000>, <0x50044000 0x2000>, <0x50046000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; timer@60005000 { compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; - interrupts = <0 0 0x04 - 0 1 0x04 - 0 41 0x04 - 0 42 0x04 - 0 121 0x04 - 0 122 0x04>; - clocks = <&tegra_car 5>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_TIMER>; }; tegra_car: clock { @@ -43,39 +48,39 @@ apbdma: dma { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_APBDMA>; }; ahb: ahb { @@ -86,14 +91,14 @@ gpio: gpio { compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; - interrupts = <0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; @@ -118,57 +123,57 @@ compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = <0 36 0x04>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 8>; status = "disabled"; - clocks = <&tegra_car 6>; + clocks = <&tegra_car TEGRA114_CLK_UARTA>; }; uartb: serial@70006040 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = <0 37 0x04>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 9>; status = "disabled"; - clocks = <&tegra_car 192>; + clocks = <&tegra_car TEGRA114_CLK_UARTB>; }; uartc: serial@70006200 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = <0 46 0x04>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 10>; status = "disabled"; - clocks = <&tegra_car 55>; + clocks = <&tegra_car TEGRA114_CLK_UARTC>; }; uartd: serial@70006300 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = <0 90 0x04>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 19>; status = "disabled"; - clocks = <&tegra_car 65>; + clocks = <&tegra_car TEGRA114_CLK_UARTD>; }; pwm: pwm { compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; - clocks = <&tegra_car 17>; + clocks = <&tegra_car TEGRA114_CLK_PWM>; status = "disabled"; }; i2c@7000c000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 12>; + clocks = <&tegra_car TEGRA114_CLK_I2C1>; clock-names = "div-clk"; status = "disabled"; }; @@ -176,10 +181,10 @@ i2c@7000c400 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>; + clocks = <&tegra_car TEGRA114_CLK_I2C2>; clock-names = "div-clk"; status = "disabled"; }; @@ -187,10 +192,10 @@ i2c@7000c500 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 67>; + clocks = <&tegra_car TEGRA114_CLK_I2C3>; clock-names = "div-clk"; status = "disabled"; }; @@ -198,10 +203,10 @@ i2c@7000c700 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c700 0x100>; - interrupts = <0 120 0x04>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 103>; + clocks = <&tegra_car TEGRA114_CLK_I2C4>; clock-names = "div-clk"; status = "disabled"; }; @@ -209,10 +214,10 @@ i2c@7000d000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000d000 0x100>; - interrupts = <0 53 0x04>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 47>; + clocks = <&tegra_car TEGRA114_CLK_I2C5>; clock-names = "div-clk"; status = "disabled"; }; @@ -220,11 +225,11 @@ spi@7000d400 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA114_CLK_SBC1>; clock-names = "spi"; status = "disabled"; }; @@ -232,11 +237,11 @@ spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA114_CLK_SBC2>; clock-names = "spi"; status = "disabled"; }; @@ -244,11 +249,11 @@ spi@7000d800 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA114_CLK_SBC3>; clock-names = "spi"; status = "disabled"; }; @@ -256,11 +261,11 @@ spi@7000da00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA114_CLK_SBC4>; clock-names = "spi"; status = "disabled"; }; @@ -268,11 +273,11 @@ spi@7000dc00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000dc00 0x200>; - interrupts = <0 94 0x04>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 104>; + clocks = <&tegra_car TEGRA114_CLK_SBC5>; clock-names = "spi"; status = "disabled"; }; @@ -280,11 +285,11 @@ spi@7000de00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000de00 0x200>; - interrupts = <0 79 0x04>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 105>; + clocks = <&tegra_car TEGRA114_CLK_SBC6>; clock-names = "spi"; status = "disabled"; }; @@ -292,22 +297,22 @@ rtc { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; - interrupts = <0 2 0x04>; - clocks = <&tegra_car 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_RTC>; }; kbc { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; - interrupts = <0 85 0x04>; - clocks = <&tegra_car 36>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_KBC>; status = "disabled"; }; pmc { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; - clocks = <&tegra_car 261>, <&clk32k_in>; + clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; @@ -322,35 +327,106 @@ nvidia,ahb = <&ahb>; }; + ahub { + compatible = "nvidia,tegra114-ahub"; + reg = <0x70080000 0x200>, + <0x70080200 0x100>, + <0x70081000 0x200>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>, + <&apbdma 12>, <&apbdma 13>, <&apbdma 14>, + <&apbdma 29>; + clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>, + <&tegra_car TEGRA114_CLK_APBIF>, + <&tegra_car TEGRA114_CLK_I2S0>, + <&tegra_car TEGRA114_CLK_I2S1>, + <&tegra_car TEGRA114_CLK_I2S2>, + <&tegra_car TEGRA114_CLK_I2S3>, + <&tegra_car TEGRA114_CLK_I2S4>, + <&tegra_car TEGRA114_CLK_DAM0>, + <&tegra_car TEGRA114_CLK_DAM1>, + <&tegra_car TEGRA114_CLK_DAM2>, + <&tegra_car TEGRA114_CLK_SPDIF_IN>, + <&tegra_car TEGRA114_CLK_AMX>, + <&tegra_car TEGRA114_CLK_ADX>; + clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif_in", "amx", "adx"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70080300 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA114_CLK_I2S0>; + status = "disabled"; + }; + + tegra_i2s1: i2s@70080400 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080400 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA114_CLK_I2S1>; + status = "disabled"; + }; + + tegra_i2s2: i2s@70080500 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080500 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA114_CLK_I2S2>; + status = "disabled"; + }; + + tegra_i2s3: i2s@70080600 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080600 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA114_CLK_I2S3>; + status = "disabled"; + }; + + tegra_i2s4: i2s@70080700 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080700 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA114_CLK_I2S4>; + status = "disabled"; + }; + }; + sdhci@78000000 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; status = "disable"; }; sdhci@78000200 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC2>; status = "disable"; }; sdhci@78000400 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC3>; status = "disable"; }; sdhci@78000600 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC4>; status = "disable"; }; @@ -385,9 +461,14 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index c12af78..2fcb3f2 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -1,4 +1,4 @@ -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Toradex Colibri T20 512MB"; @@ -14,7 +14,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&i2c_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -217,7 +218,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -443,21 +444,25 @@ ac97: ac97 { status = "okay"; - nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ - nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */ + nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) + GPIO_ACTIVE_HIGH>; }; usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; sdhci@c8000600 { - cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; }; clocks { @@ -487,7 +492,9 @@ nvidia,ac97-controller = <&ac97>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; @@ -514,7 +521,7 @@ enable-active-high; regulator-boot-on; regulator-always-on; - gpio = <&gpio 217 0>; + gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index ec52937..d9f89cd 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Harmony evaluation board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -262,7 +263,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -290,7 +291,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -434,12 +435,14 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { @@ -452,17 +455,17 @@ sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ + cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <8>; }; @@ -484,7 +487,7 @@ power { label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -627,7 +630,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 0>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; regulator@2 { @@ -636,7 +639,7 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 0>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -646,7 +649,7 @@ regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - gpio = <&pmic 2 0>; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; enable-active-high; /* Hack until board-harmony-pcie.c is removed */ status = "disabled"; @@ -658,7 +661,7 @@ regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 22 0>; /* gpio PC6 */ + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -668,7 +671,7 @@ regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 176 0>; /* gpio PW0 */ + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -691,12 +694,17 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ - nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ - - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; + nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) + GPIO_ACTIVE_HIGH>; + nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1) + GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 9f64f70..f2222bd 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-colibri-512.dtsi" +#include "tegra20-colibri-512.dtsi" / { model = "Toradex Colibri T20 512MB on Iris"; @@ -80,7 +80,7 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; regulator-always-on; - gpio = <&gpio 178 0>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; }; vcc_sd_reg: regulator@1 { diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index ace2343..7580578 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-tamonten.dtsi" +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Medcom-Wide board"; @@ -15,7 +15,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -56,10 +56,12 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 1c17ffa..cfd1276 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -270,13 +271,14 @@ nvec { compatible = "nvidia,nvec"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <80000>; - request-gpios = <&gpio 170 0>; /* gpio PV2 */ + request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; slave-addr = <138>; - clocks = <&tegra_car 67>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; }; @@ -287,7 +289,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -433,12 +435,14 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { @@ -451,9 +455,9 @@ sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 1>; /* gpio PV5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 169 0>; /* gpio PV1 */ + cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -481,7 +485,7 @@ power { label = "Power"; - gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -492,7 +496,7 @@ wifi { label = "wifi-led"; - gpios = <&gpio 24 0>; /* gpio PD0 */ + gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; linux,default-trigger = "rfkill0"; }; }; @@ -529,9 +533,12 @@ nvidia,audio-codec = <&alc5632>; nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 1a17cc3..d7a358a 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-tamonten.dtsi" +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Plutux board"; @@ -17,7 +17,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -50,10 +50,12 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 009dafe..ab177b4 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Seaboard"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -313,7 +314,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -328,14 +329,14 @@ compatible = "isil,isl29018"; reg = <0x44>; interrupt-parent = <&gpio>; - interrupts = <202 0x04>; /* GPIO PZ2 */ + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; }; gyrometer@68 { compatible = "invn,mpu3050"; reg = <0x68>; interrupt-parent = <&gpio>; - interrupts = <204 0x04>; /* gpio PZ4 */ + interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -388,7 +389,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -511,7 +512,7 @@ compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; - interrupts = <109 0x04>; /* gpio PN5 */ + interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -565,7 +566,7 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; dr_mode = "otg"; }; @@ -577,12 +578,14 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { @@ -595,16 +598,16 @@ sdhci@c8000000 { status = "okay"; - power-gpios = <&gpio 86 0>; /* gpio PK6 */ + power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -632,14 +635,14 @@ power { label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; lid { label = "Lid"; - gpios = <&gpio 23 0>; /* gpio PC7 */ + gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -806,7 +809,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 0>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; regulator@2 { @@ -815,7 +818,7 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 0>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -847,10 +850,12 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index fc2f7d6..c54faae 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -1,4 +1,4 @@ -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Avionic Design Tamonten SOM"; @@ -14,7 +14,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -321,7 +322,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -475,8 +476,8 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 742f0b3..c572c43 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-tamonten.dtsi" +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Tamonten Evaluation Carrier"; @@ -17,7 +17,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -50,10 +50,13 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 0e65c00..1701599 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Compulab TrimSlice board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -311,7 +312,7 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ + nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; }; usb-phy@c5000000 { @@ -321,12 +322,14 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { @@ -344,8 +347,8 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 1>; /* gpio PP1 */ - wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -367,7 +370,7 @@ power { label = "Power"; - gpios = <&gpio 190 1>; /* gpio PX6, active low */ + gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -375,7 +378,7 @@ poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio 191 1>; /* gpio PX7, active low */ + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; regulators { @@ -416,7 +419,9 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index e00f89e..7f8c28d 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -310,7 +311,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -325,7 +326,7 @@ compatible = "isil,isl29018"; reg = <0x44>; interrupt-parent = <&gpio>; - interrupts = <202 0x04>; /*gpio PZ2 */ + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -371,7 +372,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -511,12 +512,14 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { @@ -529,16 +532,16 @@ sdhci@c8000000 { status = "okay"; - power-gpios = <&gpio 86 0>; /* gpio PK6 */ + power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -566,7 +569,7 @@ power { label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -592,7 +595,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 0>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; regulator@2 { @@ -601,7 +604,7 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 0>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -611,7 +614,7 @@ regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 22 0>; /* gpio PC6 */ + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -621,7 +624,7 @@ regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 176 0>; /* gpio PW0 */ + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -644,12 +647,16 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ - nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) + GPIO_ACTIVE_HIGH>; + nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 3c24c9b..ea078ab 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Whistler evaluation board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -281,7 +282,7 @@ max8907@3c { compatible = "maxim,max8907"; reg = <0x3c>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; maxim,system-power-controller; @@ -508,7 +509,7 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>; }; usb-phy@c5000000 { @@ -518,7 +519,7 @@ usb@c5008000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>; }; usb-phy@c5008000 { @@ -528,8 +529,8 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; bus-width = <8>; }; @@ -612,7 +613,9 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 96d6d8a..9653fd8 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,4 +1,8 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/clock/tegra20-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" / { compatible = "nvidia,tegra20"; @@ -15,9 +19,9 @@ host1x { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; - interrupts = <0 65 0x04 /* mpcore syncpt */ - 0 67 0x04>; /* mpcore general */ - clocks = <&tegra_car 28>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; #address-cells = <1>; #size-cells = <1>; @@ -27,49 +31,50 @@ mpe { compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; - interrupts = <0 68 0x04>; - clocks = <&tegra_car 60>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; }; vi { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car 100>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_VI>; }; epp { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; - interrupts = <0 70 0x04>; - clocks = <&tegra_car 19>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; }; isp { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; - interrupts = <0 71 0x04>; - clocks = <&tegra_car 23>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; }; gr2d { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; - interrupts = <0 72 0x04>; - clocks = <&tegra_car 21>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; }; gr3d { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; - clocks = <&tegra_car 24>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; }; dc@54200000 { compatible = "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; - interrupts = <0 73 0x04>; - clocks = <&tegra_car 27>, <&tegra_car 121>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>, + <&tegra_car TEGRA20_CLK_PLL_P>; clock-names = "disp1", "parent"; rgb { @@ -80,8 +85,9 @@ dc@54240000 { compatible = "nvidia,tegra20-dc"; reg = <0x54240000 0x00040000>; - interrupts = <0 74 0x04>; - clocks = <&tegra_car 26>, <&tegra_car 121>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>, + <&tegra_car TEGRA20_CLK_PLL_P>; clock-names = "disp2", "parent"; rgb { @@ -92,8 +98,9 @@ hdmi { compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; - interrupts = <0 75 0x04>; - clocks = <&tegra_car 51>, <&tegra_car 117>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; clock-names = "hdmi", "parent"; status = "disabled"; }; @@ -101,15 +108,15 @@ tvo { compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; - interrupts = <0 76 0x04>; - clocks = <&tegra_car 102>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; status = "disabled"; }; dsi { compatible = "nvidia,tegra20-dsi"; reg = <0x54300000 0x00040000>; - clocks = <&tegra_car 48>; + clocks = <&tegra_car TEGRA20_CLK_DSI>; status = "disabled"; }; }; @@ -117,8 +124,9 @@ timer@50004600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; - interrupts = <1 13 0x304>; - clocks = <&tegra_car 132>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&tegra_car TEGRA20_CLK_TWD>; }; intc: interrupt-controller { @@ -141,11 +149,11 @@ timer@60005000 { compatible = "nvidia,tegra20-timer"; reg = <0x60005000 0x60>; - interrupts = <0 0 0x04 - 0 1 0x04 - 0 41 0x04 - 0 42 0x04>; - clocks = <&tegra_car 5>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_TIMER>; }; tegra_car: clock { @@ -157,23 +165,23 @@ apbdma: dma { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_APBDMA>; }; ahb { @@ -184,13 +192,13 @@ gpio: gpio { compatible = "nvidia,tegra20-gpio"; reg = <0x6000d000 0x1000>; - interrupts = <0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; @@ -213,27 +221,27 @@ tegra_ac97: ac97 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; - interrupts = <0 81 0x04>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 12>; - clocks = <&tegra_car 3>; + clocks = <&tegra_car TEGRA20_CLK_AC97>; status = "disabled"; }; tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; - interrupts = <0 13 0x04>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 2>; - clocks = <&tegra_car 11>; + clocks = <&tegra_car TEGRA20_CLK_I2S1>; status = "disabled"; }; tegra_i2s2: i2s@70002a00 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; - interrupts = <0 3 0x04>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 18>; + clocks = <&tegra_car TEGRA20_CLK_I2S2>; status = "disabled"; }; @@ -248,9 +256,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = <0 36 0x04>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 8>; - clocks = <&tegra_car 6>; + clocks = <&tegra_car TEGRA20_CLK_UARTA>; status = "disabled"; }; @@ -258,9 +266,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = <0 37 0x04>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 9>; - clocks = <&tegra_car 96>; + clocks = <&tegra_car TEGRA20_CLK_UARTB>; status = "disabled"; }; @@ -268,9 +276,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = <0 46 0x04>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 10>; - clocks = <&tegra_car 55>; + clocks = <&tegra_car TEGRA20_CLK_UARTC>; status = "disabled"; }; @@ -278,9 +286,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = <0 90 0x04>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 19>; - clocks = <&tegra_car 65>; + clocks = <&tegra_car TEGRA20_CLK_UARTD>; status = "disabled"; }; @@ -288,9 +296,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = <0 91 0x04>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 20>; - clocks = <&tegra_car 66>; + clocks = <&tegra_car TEGRA20_CLK_UARTE>; status = "disabled"; }; @@ -298,24 +306,25 @@ compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; - clocks = <&tegra_car 17>; + clocks = <&tegra_car TEGRA20_CLK_PWM>; status = "disabled"; }; rtc { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; - interrupts = <0 2 0x04>; - clocks = <&tegra_car 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_RTC>; }; i2c@7000c000 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C1>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -323,21 +332,22 @@ spi@7000c380 { compatible = "nvidia,tegra20-sflash"; reg = <0x7000c380 0x80>; - interrupts = <0 39 0x04>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 11>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 43>; + clocks = <&tegra_car TEGRA20_CLK_SPI>; status = "disabled"; }; i2c@7000c400 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C2>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -345,10 +355,11 @@ i2c@7000c500 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 67>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -356,10 +367,11 @@ i2c@7000d000 { compatible = "nvidia,tegra20-i2c-dvc"; reg = <0x7000d000 0x200>; - interrupts = <0 53 0x04>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 47>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_DVC>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -367,59 +379,59 @@ spi@7000d400 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA20_CLK_SBC1>; status = "disabled"; }; spi@7000d600 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; status = "disabled"; }; spi@7000d800 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA20_CLK_SBC3>; status = "disabled"; }; spi@7000da00 { compatible = "nvidia,tegra20-slink"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA20_CLK_SBC4>; status = "disabled"; }; kbc { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; - interrupts = <0 85 0x04>; - clocks = <&tegra_car 36>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_KBC>; status = "disabled"; }; pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; - clocks = <&tegra_car 110>, <&clk32k_in>; + clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; @@ -427,7 +439,7 @@ compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; - interrupts = <0 77 0x04>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; iommu { @@ -446,10 +458,10 @@ usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; - interrupts = <0 20 0x04>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; nvidia,has-legacy-mode; - clocks = <&tegra_car 22>; + clocks = <&tegra_car TEGRA20_CLK_USBD>; nvidia,needs-double-reset; nvidia,phy = <&phy1>; status = "disabled"; @@ -459,10 +471,10 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5000000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 22>, - <&tegra_car 127>, - <&tegra_car 106>, - <&tegra_car 22>; + clocks = <&tegra_car TEGRA20_CLK_USBD>, + <&tegra_car TEGRA20_CLK_PLL_U>, + <&tegra_car TEGRA20_CLK_CLK_M>, + <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; hssync_start_delay = <9>; @@ -478,9 +490,9 @@ usb@c5004000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5004000 0x4000>; - interrupts = <0 21 0x04>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "ulpi"; - clocks = <&tegra_car 58>; + clocks = <&tegra_car TEGRA20_CLK_USB2>; nvidia,phy = <&phy2>; status = "disabled"; }; @@ -489,9 +501,9 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5004000 0x4000>; phy_type = "ulpi"; - clocks = <&tegra_car 58>, - <&tegra_car 127>, - <&tegra_car 93>; + clocks = <&tegra_car TEGRA20_CLK_USB2>, + <&tegra_car TEGRA20_CLK_PLL_U>, + <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; status = "disabled"; }; @@ -499,9 +511,9 @@ usb@c5008000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5008000 0x4000>; - interrupts = <0 97 0x04>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; - clocks = <&tegra_car 59>; + clocks = <&tegra_car TEGRA20_CLK_USB3>; nvidia,phy = <&phy3>; status = "disabled"; }; @@ -510,10 +522,10 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5008000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 59>, - <&tegra_car 127>, - <&tegra_car 106>, - <&tegra_car 22>; + clocks = <&tegra_car TEGRA20_CLK_USB3>, + <&tegra_car TEGRA20_CLK_PLL_U>, + <&tegra_car TEGRA20_CLK_CLK_M>, + <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; hssync_start_delay = <9>; idle_wait_delay = <17>; @@ -528,32 +540,32 @@ sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC2>; status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC3>; status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC4>; status = "disabled"; }; @@ -576,7 +588,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 56 0x04 - 0 57 0x04>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index b732f7c..87c5f7b 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1,13 +1,13 @@ /dts-v1/; -/include/ "tegra30.dtsi" +#include "tegra30.dtsi" / { model = "NVIDIA Tegra30 Beaver evaluation board"; compatible = "nvidia,beaver", "nvidia,tegra30"; memory { - reg = <0x80000000 0x80000000>; + reg = <0x80000000 0x7ff00000>; }; pinmux { @@ -116,6 +116,15 @@ status = "okay"; clock-frequency = <100000>; + rt5640: rt5640 { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>; + }; + tps62361 { compatible = "ti,tps62361"; reg = <0x60>; @@ -133,7 +142,7 @@ compatible = "ti,tps65911"; reg = <0x2d>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -264,9 +273,9 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -312,7 +321,7 @@ regulator-boot-on; regulator-always-on; enable-active-high; - gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; ddr_reg: regulator@2 { @@ -324,7 +333,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */ + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v_in_reg>; }; @@ -337,7 +346,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 30 0>; /* gpio PD6 */ + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v_in_reg>; }; @@ -348,7 +357,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -360,7 +369,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -374,7 +383,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */ + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v_in_reg>; }; @@ -387,8 +396,41 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 95 0>; /* gpio PL7 */ + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + gpled1 { + label = "LED1"; /* CR5A1 (blue) */ + gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>; + }; + gpled2 { + label = "LED2"; /* CR4A2 (green) */ + gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-beaver", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Beaver"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index e392bd2..1082c5e 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra30-cardhu.dtsi" +#include "tegra30-cardhu.dtsi" /* This dts file support the cardhu A02 version of board */ @@ -22,7 +22,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; sys_3v3_reg: regulator@101 { @@ -34,7 +34,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@102 { @@ -44,7 +44,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -56,7 +56,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -68,7 +68,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pmic 2 0>; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; }; vdd_bl_reg: regulator@105 { @@ -80,13 +80,13 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 83 0>; /* GPIO PK3 */ + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; }; }; sdhci@78000400 { status = "okay"; - power-gpios = <&gpio 28 0>; /* gpio PD4 */ + power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index d0db6c7..bf012bdd 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra30-cardhu.dtsi" +#include "tegra30-cardhu.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -22,7 +22,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; sys_3v3_reg: regulator@101 { @@ -34,7 +34,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@102 { @@ -44,7 +44,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -56,7 +56,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -68,7 +68,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pmic 8 0>; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; }; vdd_bl_reg: regulator@105 { @@ -80,7 +80,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 234 0>; /* GPIO PDD2 */ + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; vdd_bl2_reg: regulator@106 { @@ -92,13 +92,13 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 232 0>; /* GPIO PDD0 */ + gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; sdhci@78000400 { status = "okay"; - power-gpios = <&gpio 27 0>; /* gpio PD3 */ + power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 01b4c26..f65b53d 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,4 +1,4 @@ -/include/ "tegra30.dtsi" +#include "tegra30.dtsi" /** * This file contains common DT entry for all fab version of Cardhu. @@ -146,7 +146,7 @@ compatible = "isil,isl29028"; reg = <0x44>; interrupt-parent = <&gpio>; - interrupts = <88 0x04>; /*gpio PL0 */ + interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -163,7 +163,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <179 0x04>; /* gpio PW3 */ + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -190,7 +190,7 @@ compatible = "ti,tps65911"; reg = <0x2d>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -318,9 +318,9 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -364,7 +364,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; enable-active-high; - gpio = <&gpio 220 0>; /* gpio PBB4 */ + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; vin-supply = <&vio_reg>; }; @@ -377,7 +377,7 @@ regulator-boot-on; regulator-always-on; enable-active-high; - gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; emmc_3v3_reg: regulator@3 { @@ -389,7 +389,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 25 0>; /* gpio PD1 */ + gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -400,7 +400,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 30 0>; /* gpio PD6 */ + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; }; pex_hvdd_3v3_reg: regulator@5 { @@ -410,7 +410,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 95 0>; /* gpio PL7 */ + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -421,7 +421,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&gpio 142 0>; /* gpio PR6 */ + gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -432,7 +432,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&gpio 143 0>; /* gpio PR7 */ + gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -443,7 +443,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 144 0>; /* gpio PS0 */ + gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -456,7 +456,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 24 0>; /* gpio PD0 */ + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -467,7 +467,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 94 0>; /* gpio PL6 */ + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -480,7 +480,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 92 0>; /* gpio PL4 */ + gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -491,7 +491,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 152 0>; /* GPIO PT0 */ + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -515,10 +515,13 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 15ded60..d8783f0 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1,4 +1,8 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/clock/tegra30-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" / { compatible = "nvidia,tegra30"; @@ -15,9 +19,9 @@ host1x { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; - interrupts = <0 65 0x04 /* mpcore syncpt */ - 0 67 0x04>; /* mpcore general */ - clocks = <&tegra_car 28>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA30_CLK_HOST1X>; #address-cells = <1>; #size-cells = <1>; @@ -27,36 +31,36 @@ mpe { compatible = "nvidia,tegra30-mpe"; reg = <0x54040000 0x00040000>; - interrupts = <0 68 0x04>; - clocks = <&tegra_car 60>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_MPE>; }; vi { compatible = "nvidia,tegra30-vi"; reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car 164>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_VI>; }; epp { compatible = "nvidia,tegra30-epp"; reg = <0x540c0000 0x00040000>; - interrupts = <0 70 0x04>; - clocks = <&tegra_car 19>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_EPP>; }; isp { compatible = "nvidia,tegra30-isp"; reg = <0x54100000 0x00040000>; - interrupts = <0 71 0x04>; - clocks = <&tegra_car 23>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_ISP>; }; gr2d { compatible = "nvidia,tegra30-gr2d"; reg = <0x54140000 0x00040000>; - interrupts = <0 72 0x04>; - clocks = <&tegra_car 21>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_GR2D>; }; gr3d { @@ -69,8 +73,9 @@ dc@54200000 { compatible = "nvidia,tegra30-dc"; reg = <0x54200000 0x00040000>; - interrupts = <0 73 0x04>; - clocks = <&tegra_car 27>, <&tegra_car 179>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_DISP1>, + <&tegra_car TEGRA30_CLK_PLL_P>; clock-names = "disp1", "parent"; rgb { @@ -81,8 +86,9 @@ dc@54240000 { compatible = "nvidia,tegra30-dc"; reg = <0x54240000 0x00040000>; - interrupts = <0 74 0x04>; - clocks = <&tegra_car 26>, <&tegra_car 179>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_DISP2>, + <&tegra_car TEGRA30_CLK_PLL_P>; clock-names = "disp2", "parent"; rgb { @@ -93,8 +99,9 @@ hdmi { compatible = "nvidia,tegra30-hdmi"; reg = <0x54280000 0x00040000>; - interrupts = <0 75 0x04>; - clocks = <&tegra_car 51>, <&tegra_car 189>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_HDMI>, + <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>; clock-names = "hdmi", "parent"; status = "disabled"; }; @@ -102,15 +109,15 @@ tvo { compatible = "nvidia,tegra30-tvo"; reg = <0x542c0000 0x00040000>; - interrupts = <0 76 0x04>; - clocks = <&tegra_car 169>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TVO>; status = "disabled"; }; dsi { compatible = "nvidia,tegra30-dsi"; reg = <0x54300000 0x00040000>; - clocks = <&tegra_car 48>; + clocks = <&tegra_car TEGRA30_CLK_DSIA>; status = "disabled"; }; }; @@ -118,8 +125,9 @@ timer@50004600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; - interrupts = <1 13 0xf04>; - clocks = <&tegra_car 214>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&tegra_car TEGRA30_CLK_TWD>; }; intc: interrupt-controller { @@ -142,13 +150,13 @@ timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; - interrupts = <0 0 0x04 - 0 1 0x04 - 0 41 0x04 - 0 42 0x04 - 0 121 0x04 - 0 122 0x04>; - clocks = <&tegra_car 5>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TIMER>; }; tegra_car: clock { @@ -160,39 +168,39 @@ apbdma: dma { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_APBDMA>; }; ahb: ahb { @@ -203,14 +211,14 @@ gpio: gpio { compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; - interrupts = <0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; @@ -235,9 +243,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = <0 36 0x04>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 8>; - clocks = <&tegra_car 6>; + clocks = <&tegra_car TEGRA30_CLK_UARTA>; status = "disabled"; }; @@ -245,9 +253,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = <0 37 0x04>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 9>; - clocks = <&tegra_car 160>; + clocks = <&tegra_car TEGRA30_CLK_UARTB>; status = "disabled"; }; @@ -255,9 +263,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = <0 46 0x04>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 10>; - clocks = <&tegra_car 55>; + clocks = <&tegra_car TEGRA30_CLK_UARTC>; status = "disabled"; }; @@ -265,9 +273,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = <0 90 0x04>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 19>; - clocks = <&tegra_car 65>; + clocks = <&tegra_car TEGRA30_CLK_UARTD>; status = "disabled"; }; @@ -275,9 +283,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = <0 91 0x04>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 20>; - clocks = <&tegra_car 66>; + clocks = <&tegra_car TEGRA30_CLK_UARTE>; status = "disabled"; }; @@ -285,24 +293,25 @@ compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; - clocks = <&tegra_car 17>; + clocks = <&tegra_car TEGRA30_CLK_PWM>; status = "disabled"; }; rtc { compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; - interrupts = <0 2 0x04>; - clocks = <&tegra_car 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_RTC>; }; i2c@7000c000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C1>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -310,10 +319,11 @@ i2c@7000c400 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C2>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -321,10 +331,11 @@ i2c@7000c500 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 67>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C3>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -332,10 +343,11 @@ i2c@7000c700 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c700 0x100>; - interrupts = <0 120 0x04>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 103>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C4>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -343,10 +355,11 @@ i2c@7000d000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000d000 0x100>; - interrupts = <0 53 0x04>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 47>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C5>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -354,81 +367,81 @@ spi@7000d400 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA30_CLK_SBC1>; status = "disabled"; }; spi@7000d600 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA30_CLK_SBC2>; status = "disabled"; }; spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA30_CLK_SBC3>; status = "disabled"; }; spi@7000da00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA30_CLK_SBC4>; status = "disabled"; }; spi@7000dc00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000dc00 0x200>; - interrupts = <0 94 0x04>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 104>; + clocks = <&tegra_car TEGRA30_CLK_SBC5>; status = "disabled"; }; spi@7000de00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000de00 0x200>; - interrupts = <0 79 0x04>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 105>; + clocks = <&tegra_car TEGRA30_CLK_SBC6>; status = "disabled"; }; kbc { compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; - interrupts = <0 85 0x04>; - clocks = <&tegra_car 36>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_KBC>; status = "disabled"; }; pmc { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; - clocks = <&tegra_car 218>, <&clk32k_in>; + clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; @@ -438,7 +451,7 @@ 0x7000f03c 0x1b4 0x7000f200 0x028 0x7000f284 0x17c>; - interrupts = <0 77 0x04>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; iommu { @@ -455,12 +468,19 @@ compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 0x70080200 0x100>; - interrupts = <0 103 0x04>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, - <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, - <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, - <&tegra_car 110>, <&tegra_car 162>; + clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>, + <&tegra_car TEGRA30_CLK_APBIF>, + <&tegra_car TEGRA30_CLK_I2S0>, + <&tegra_car TEGRA30_CLK_I2S1>, + <&tegra_car TEGRA30_CLK_I2S2>, + <&tegra_car TEGRA30_CLK_I2S3>, + <&tegra_car TEGRA30_CLK_I2S4>, + <&tegra_car TEGRA30_CLK_DAM0>, + <&tegra_car TEGRA30_CLK_DAM1>, + <&tegra_car TEGRA30_CLK_DAM2>, + <&tegra_car TEGRA30_CLK_SPDIF_IN>; clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", "i2s3", "i2s4", "dam0", "dam1", "dam2", "spdif_in"; @@ -472,7 +492,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - clocks = <&tegra_car 30>; + clocks = <&tegra_car TEGRA30_CLK_I2S0>; status = "disabled"; }; @@ -480,7 +500,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - clocks = <&tegra_car 11>; + clocks = <&tegra_car TEGRA30_CLK_I2S1>; status = "disabled"; }; @@ -488,7 +508,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - clocks = <&tegra_car 18>; + clocks = <&tegra_car TEGRA30_CLK_I2S2>; status = "disabled"; }; @@ -496,7 +516,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - clocks = <&tegra_car 101>; + clocks = <&tegra_car TEGRA30_CLK_I2S3>; status = "disabled"; }; @@ -504,7 +524,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - clocks = <&tegra_car 102>; + clocks = <&tegra_car TEGRA30_CLK_I2S4>; status = "disabled"; }; }; @@ -512,32 +532,32 @@ sdhci@78000000 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC1>; status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC2>; status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC4>; status = "disabled"; }; @@ -572,9 +592,9 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 144 0x04 - 0 145 0x04 - 0 146 0x04 - 0 147 0x04>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi new file mode 100644 index 0000000..c353ef0 --- /dev/null +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2013 Linaro, Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&twl { + pinctrl-names = "default"; + pinctrl-0 = <&twl4030_pins>; +}; + +&omap3_pmx_core { + /* + * On most OMAP3 platforms, the twl4030 IRQ line is connected + * to the SYS_NIRQ line on OMAP. Therefore, configure the + * defaults for the SYS_NIRQ pin here. + */ + twl4030_pins: pinmux_twl4030_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ + >; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index a604107..de0c24f 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -20,4 +20,13 @@ memory { reg = <0x20000000 0x4000000>; }; + + ahb { + apb { + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index f8ec36c..290e603 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -47,6 +47,20 @@ status = "okay"; }; + spi0: spi@fffa4000 { + cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <0>; + spi-max-frequency = <15000000>; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index c979c06..ec77cf8 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -6,25 +6,9 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -#include "at91sam9g20.dtsi" -#include "usb_a9260_common.dtsi" +#include "usb_a9g20_common.dtsi" / { model = "Calao USB A9G20"; compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - i2c@0 { - rv3029c2@56 { - compatible = "rv3029c2"; - reg = <0x56>; - }; - }; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi new file mode 100644 index 0000000..0b3b361 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -0,0 +1,27 @@ +/* + * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" + +/ { + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + i2c@0 { + rv3029c2@56 { + compatible = "rv3029c2"; + reg = <0x56>; + }; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9g20_lpw.dts b/arch/arm/boot/dts/usb_a9g20_lpw.dts new file mode 100644 index 0000000..f8cb1b9 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20_lpw.dts @@ -0,0 +1,31 @@ +/* + * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "usb_a9g20_common.dtsi" + +/ { + model = "Calao USB A9G20 Low Power"; + compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; + + ahb { + apb { + spi1: spi@fffcc000 { + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + mmc-slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + voltage-ranges = <3200 3400>; + spi-max-frequency = <25000000>; + interrupt-parent = <&pioC>; + interrupts = <4 IRQ_TYPE_EDGE_BOTH>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h new file mode 100644 index 0000000..1ee681f --- /dev/null +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -0,0 +1,810 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_VF610_PINFUNC_H +#define __DTS_VF610_PINFUNC_H + +/* + * The pin function ID for VF610 is a tuple of: + * <mux_reg input_reg mux_mode input_val> + */ + +#define ALT0 0x0 +#define ALT1 0x1 +#define ALT2 0x2 +#define ALT3 0x3 +#define ALT4 0x4 +#define ALT5 0x5 +#define ALT6 0x6 +#define ALT7 0x7 + + +#define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0 +#define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0 +#define VF610_PAD_PTA6__RMII_CLKIN 0x000 0x2F0 ALT2 0x0 +#define VF610_PAD_PTA6__DCU1_TCON11 0x000 0x000 ALT4 0x0 +#define VF610_PAD_PTA6__DCU1_R2 0x000 0x000 ALT7 0x0 +#define VF610_PAD_PTA8__GPIO_1 0x004 0x000 ALT0 0x0 +#define VF610_PAD_PTA8__TCLK 0x004 0x000 ALT1 0x0 +#define VF610_PAD_PTA8__DCU0_R0 0x004 0x000 ALT4 0x0 +#define VF610_PAD_PTA8__MLB_CLK 0x004 0x354 ALT7 0x0 +#define VF610_PAD_PTA9__GPIO_2 0x008 0x000 ALT0 0x0 +#define VF610_PAD_PTA9__TDI 0x008 0x000 ALT1 0x0 +#define VF610_PAD_PTA9__RMII_CLKOUT 0x008 0x000 ALT2 0x0 +#define VF610_PAD_PTA9__RMII_CLKIN 0x008 0x2F0 ALT3 0x1 +#define VF610_PAD_PTA9__DCU0_R1 0x008 0x000 ALT4 0x0 +#define VF610_PAD_PTA9__WDOG_B 0x008 0x000 ALT6 0x0 +#define VF610_PAD_PTA10__GPIO_3 0x00C 0x000 ALT0 0x0 +#define VF610_PAD_PTA10__TDO 0x00C 0x000 ALT1 0x0 +#define VF610_PAD_PTA10__EXT_AUDIO_MCLK 0x00C 0x2EC ALT2 0x0 +#define VF610_PAD_PTA10__DCU0_G0 0x00C 0x000 ALT4 0x0 +#define VF610_PAD_PTA10__ENET_TS_CLKIN 0x00C 0x2F4 ALT6 0x0 +#define VF610_PAD_PTA10__MLB_SIGNAL 0x00C 0x35C ALT7 0x0 +#define VF610_PAD_PTA11__GPIO_4 0x010 0x000 ALT0 0x0 +#define VF610_PAD_PTA11__TMS 0x010 0x000 ALT1 0x0 +#define VF610_PAD_PTA11__DCU0_G1 0x010 0x000 ALT4 0x0 +#define VF610_PAD_PTA11__MLB_DATA 0x010 0x358 ALT7 0x0 +#define VF610_PAD_PTA12__GPIO_5 0x014 0x000 ALT0 0x0 +#define VF610_PAD_PTA12__TRACECK 0x014 0x000 ALT1 0x0 +#define VF610_PAD_PTA12__EXT_AUDIO_MCLK 0x014 0x2EC ALT2 0x1 +#define VF610_PAD_PTA12__VIU_DATA13 0x014 0x000 ALT6 0x0 +#define VF610_PAD_PTA12__I2C0_SCL 0x014 0x33C ALT7 0x0 +#define VF610_PAD_PTA16__GPIO_6 0x018 0x000 ALT0 0x0 +#define VF610_PAD_PTA16__TRACED0 0x018 0x000 ALT1 0x0 +#define VF610_PAD_PTA16__USB0_VBUS_EN 0x018 0x000 ALT2 0x0 +#define VF610_PAD_PTA16__ADC1_SE0 0x018 0x000 ALT3 0x0 +#define VF610_PAD_PTA16__LCD29 0x018 0x000 ALT4 0x0 +#define VF610_PAD_PTA16__SAI2_TX_BCLK 0x018 0x370 ALT5 0x0 +#define VF610_PAD_PTA16__VIU_DATA14 0x018 0x000 ALT6 0x0 +#define VF610_PAD_PTA16__I2C0_SDA 0x018 0x340 ALT7 0x0 +#define VF610_PAD_PTA17__GPIO_7 0x01C 0x000 ALT0 0x0 +#define VF610_PAD_PTA17__TRACED1 0x01C 0x000 ALT1 0x0 +#define VF610_PAD_PTA17__USB0_VBUS_OC 0x01C 0x000 ALT2 0x0 +#define VF610_PAD_PTA17__ADC1_SE1 0x01C 0x000 ALT3 0x0 +#define VF610_PAD_PTA17__LCD30 0x01C 0x000 ALT4 0x0 +#define VF610_PAD_PTA17__USB0_SOF_PULSE 0x01C 0x000 ALT5 0x0 +#define VF610_PAD_PTA17__VIU_DATA15 0x01C 0x000 ALT6 0x0 +#define VF610_PAD_PTA17__I2C1_SCL 0x01C 0x344 ALT7 0x0 +#define VF610_PAD_PTA18__GPIO_8 0x020 0x000 ALT0 0x0 +#define VF610_PAD_PTA18__TRACED2 0x020 0x000 ALT1 0x0 +#define VF610_PAD_PTA18__ADC0_SE0 0x020 0x000 ALT2 0x0 +#define VF610_PAD_PTA18__FTM1_QD_PHA 0x020 0x334 ALT3 0x0 +#define VF610_PAD_PTA18__LCD31 0x020 0x000 ALT4 0x0 +#define VF610_PAD_PTA18__SAI2_TX_DATA 0x020 0x000 ALT5 0x0 +#define VF610_PAD_PTA18__VIU_DATA16 0x020 0x000 ALT6 0x0 +#define VF610_PAD_PTA18__I2C1_SDA 0x020 0x348 ALT7 0x0 +#define VF610_PAD_PTA19__GPIO_9 0x024 0x000 ALT0 0x0 +#define VF610_PAD_PTA19__TRACED3 0x024 0x000 ALT1 0x0 +#define VF610_PAD_PTA19__ADC0_SE1 0x024 0x000 ALT2 0x0 +#define VF610_PAD_PTA19__FTM1_QD_PHB 0x024 0x338 ALT3 0x0 +#define VF610_PAD_PTA19__LCD32 0x024 0x000 ALT4 0x0 +#define VF610_PAD_PTA19__SAI2_TX_SYNC 0x024 0x000 ALT5 0x0 +#define VF610_PAD_PTA19__VIU_DATA17 0x024 0x000 ALT6 0x0 +#define VF610_PAD_PTA19__QSPI1_A_QSCK 0x024 0x374 ALT7 0x0 +#define VF610_PAD_PTA20__GPIO_10 0x028 0x000 ALT0 0x0 +#define VF610_PAD_PTA20__TRACED4 0x028 0x000 ALT1 0x0 +#define VF610_PAD_PTA20__LCD33 0x028 0x000 ALT4 0x0 +#define VF610_PAD_PTA20__UART3_TX 0x028 0x394 ALT6 0x0 +#define VF610_PAD_PTA20__DCU1_HSYNC 0x028 0x000 ALT7 0x0 +#define VF610_PAD_PTA21__GPIO_11 0x02C 0x000 ALT0 0x0 +#define VF610_PAD_PTA21__TRACED5 0x02C 0x000 ALT1 0x0 +#define VF610_PAD_PTA21__SAI2_RX_BCLK 0x02C 0x364 ALT5 0x0 +#define VF610_PAD_PTA21__UART3_RX 0x02C 0x390 ALT6 0x0 +#define VF610_PAD_PTA21__DCU1_VSYNC 0x02C 0x000 ALT7 0x0 +#define VF610_PAD_PTA22__GPIO_12 0x030 0x000 ALT0 0x0 +#define VF610_PAD_PTA22__TRACED6 0x030 0x000 ALT1 0x0 +#define VF610_PAD_PTA22__SAI2_RX_DATA 0x030 0x368 ALT5 0x0 +#define VF610_PAD_PTA22__I2C2_SCL 0x030 0x34C ALT6 0x0 +#define VF610_PAD_PTA22__DCU1_TAG 0x030 0x000 ALT7 0x0 +#define VF610_PAD_PTA23__GPIO_13 0x034 0x000 ALT0 0x0 +#define VF610_PAD_PTA23__TRACED7 0x034 0x000 ALT1 0x0 +#define VF610_PAD_PTA23__SAI2_RX_SYNC 0x034 0x36C ALT5 0x0 +#define VF610_PAD_PTA23__I2C2_SDA 0x034 0x350 ALT6 0x0 +#define VF610_PAD_PTA23__DCU1_DE 0x034 0x000 ALT7 0x0 +#define VF610_PAD_PTA24__GPIO_14 0x038 0x000 ALT0 0x0 +#define VF610_PAD_PTA24__TRACED8 0x038 0x000 ALT1 0x0 +#define VF610_PAD_PTA24__USB1_VBUS_EN 0x038 0x000 ALT2 0x0 +#define VF610_PAD_PTA24__ESDHC1_CLK 0x038 0x000 ALT5 0x0 +#define VF610_PAD_PTA24__DCU1_TCON4 0x038 0x000 ALT6 0x0 +#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL 0x038 0x000 ALT7 0x0 +#define VF610_PAD_PTA25__GPIO_15 0x03C 0x000 ALT0 0x0 +#define VF610_PAD_PTA25__TRACED9 0x03C 0x000 ALT1 0x0 +#define VF610_PAD_PTA25__USB1_VBUS_OC 0x03C 0x000 ALT2 0x0 +#define VF610_PAD_PTA25__ESDHC1_CMD 0x03C 0x000 ALT5 0x0 +#define VF610_PAD_PTA25__DCU1_TCON5 0x03C 0x000 ALT6 0x0 +#define VF610_PAD_PTA26__GPIO_16 0x040 0x000 ALT0 0x0 +#define VF610_PAD_PTA26__TRACED10 0x040 0x000 ALT1 0x0 +#define VF610_PAD_PTA26__SAI3_TX_BCLK 0x040 0x000 ALT2 0x0 +#define VF610_PAD_PTA26__ESDHC1_DAT0 0x040 0x000 ALT5 0x0 +#define VF610_PAD_PTA26__DCU1_TCON6 0x040 0x000 ALT6 0x0 +#define VF610_PAD_PTA27__GPIO_17 0x044 0x000 ALT0 0x0 +#define VF610_PAD_PTA27__TRACED11 0x044 0x000 ALT1 0x0 +#define VF610_PAD_PTA27__SAI3_RX_BCLK 0x044 0x000 ALT2 0x0 +#define VF610_PAD_PTA27__ESDHC1_DAT1 0x044 0x000 ALT5 0x0 +#define VF610_PAD_PTA27__DCU1_TCON7 0x044 0x000 ALT6 0x0 +#define VF610_PAD_PTA28__GPIO_18 0x048 0x000 ALT0 0x0 +#define VF610_PAD_PTA28__TRACED12 0x048 0x000 ALT1 0x0 +#define VF610_PAD_PTA28__SAI3_RX_DATA 0x048 0x000 ALT2 0x0 +#define VF610_PAD_PTA28__ENET1_1588_TMR0 0x048 0x000 ALT3 0x0 +#define VF610_PAD_PTA28__UART4_TX 0x048 0x000 ALT4 0x0 +#define VF610_PAD_PTA28__ESDHC1_DATA2 0x048 0x000 ALT5 0x0 +#define VF610_PAD_PTA28__DCU1_TCON8 0x048 0x000 ALT6 0x0 +#define VF610_PAD_PTA29__GPIO_19 0x04C 0x000 ALT0 0x0 +#define VF610_PAD_PTA29__TRACED13 0x04C 0x000 ALT1 0x0 +#define VF610_PAD_PTA29__SAI3_TX_DATA 0x04C 0x000 ALT2 0x0 +#define VF610_PAD_PTA29__ENET1_1588_TMR1 0x04C 0x000 ALT3 0x0 +#define VF610_PAD_PTA29__UART4_RX 0x04C 0x000 ALT4 0x0 +#define VF610_PAD_PTA29__ESDHC1_DAT3 0x04C 0x000 ALT5 0x0 +#define VF610_PAD_PTA29__DCU1_TCON9 0x04C 0x000 ALT6 0x0 +#define VF610_PAD_PTA30__GPIO_20 0x050 0x000 ALT0 0x0 +#define VF610_PAD_PTA30__TRACED14 0x050 0x000 ALT1 0x0 +#define VF610_PAD_PTA30__SAI3_RX_SYNC 0x050 0x000 ALT2 0x0 +#define VF610_PAD_PTA30__ENET1_1588_TMR2 0x050 0x000 ALT3 0x0 +#define VF610_PAD_PTA30__UART4_RTS 0x050 0x000 ALT4 0x0 +#define VF610_PAD_PTA30__I2C3_SCL 0x050 0x000 ALT5 0x0 +#define VF610_PAD_PTA30__UART3_TX 0x050 0x394 ALT7 0x1 +#define VF610_PAD_PTA31__GPIO_21 0x054 0x000 ALT0 0x0 +#define VF610_PAD_PTA31__TRACED15 0x054 0x000 ALT1 0x0 +#define VF610_PAD_PTA31__SAI3_TX_SYNC 0x054 0x000 ALT2 0x0 +#define VF610_PAD_PTA31__ENET1_1588_TMR3 0x054 0x000 ALT3 0x0 +#define VF610_PAD_PTA31__UART4_CTS 0x054 0x000 ALT4 0x0 +#define VF610_PAD_PTA31__I2C3_SDA 0x054 0x000 ALT5 0x0 +#define VF610_PAD_PTA31__UART3_RX 0x054 0x390 ALT7 0x1 +#define VF610_PAD_PTB0__GPIO_22 0x058 0x000 ALT0 0x0 +#define VF610_PAD_PTB0__FTM0_CH0 0x058 0x000 ALT1 0x0 +#define VF610_PAD_PTB0__ADC0_SE2 0x058 0x000 ALT2 0x0 +#define VF610_PAD_PTB0__TRACE_CTL 0x058 0x000 ALT3 0x0 +#define VF610_PAD_PTB0__LCD34 0x058 0x000 ALT4 0x0 +#define VF610_PAD_PTB0__SAI2_RX_BCLK 0x058 0x364 ALT5 0x1 +#define VF610_PAD_PTB0__VIU_DATA18 0x058 0x000 ALT6 0x0 +#define VF610_PAD_PTB0__QSPI1_A_QPCS0 0x058 0x000 ALT7 0x0 +#define VF610_PAD_PTB1__GPIO_23 0x05C 0x000 ALT0 0x0 +#define VF610_PAD_PTB1__FTM0_CH1 0x05C 0x000 ALT1 0x0 +#define VF610_PAD_PTB1__ADC0_SE3 0x05C 0x000 ALT2 0x0 +#define VF610_PAD_PTB1__SRC_RCON30 0x05C 0x000 ALT3 0x0 +#define VF610_PAD_PTB1__LCD35 0x05C 0x000 ALT4 0x0 +#define VF610_PAD_PTB1__SAI2_RX_DATA 0x05C 0x368 ALT5 0x1 +#define VF610_PAD_PTB1__VIU_DATA19 0x05C 0x000 ALT6 0x0 +#define VF610_PAD_PTB1__QSPI1_A_DATA3 0x05C 0x000 ALT7 0x0 +#define VF610_PAD_PTB2__GPIO_24 0x060 0x000 ALT0 0x0 +#define VF610_PAD_PTB2__FTM0_CH2 0x060 0x000 ALT1 0x0 +#define VF610_PAD_PTB2__ADC1_SE2 0x060 0x000 ALT2 0x0 +#define VF610_PAD_PTB2__SRC_RCON31 0x060 0x000 ALT3 0x0 +#define VF610_PAD_PTB2__LCD36 0x060 0x000 ALT4 0x0 +#define VF610_PAD_PTB2__SAI2_RX_SYNC 0x060 0x36C ALT5 0x1 +#define VF610_PAD_PTB2__VIDEO_IN0_DATA20 0x060 0x000 ALT6 0x0 +#define VF610_PAD_PTB2__QSPI1_A_DATA2 0x060 0x000 ALT7 0x0 +#define VF610_PAD_PTB3__GPIO_25 0x064 0x000 ALT0 0x0 +#define VF610_PAD_PTB3__FTM0_CH3 0x064 0x000 ALT1 0x0 +#define VF610_PAD_PTB3__ADC1_SE3 0x064 0x000 ALT2 0x0 +#define VF610_PAD_PTB3__PDB_EXTRIG 0x064 0x000 ALT3 0x0 +#define VF610_PAD_PTB3__LCD37 0x064 0x000 ALT4 0x0 +#define VF610_PAD_PTB3__VIU_DATA21 0x064 0x000 ALT6 0x0 +#define VF610_PAD_PTB3__QSPI1_A_DATA1 0x064 0x000 ALT7 0x0 +#define VF610_PAD_PTB4__GPIO_26 0x068 0x000 ALT0 0x0 +#define VF610_PAD_PTB4__FTM0_CH4 0x068 0x000 ALT1 0x0 +#define VF610_PAD_PTB4__UART1_TX 0x068 0x380 ALT2 0x0 +#define VF610_PAD_PTB4__ADC0_SE4 0x068 0x000 ALT3 0x0 +#define VF610_PAD_PTB4__LCD38 0x068 0x000 ALT4 0x0 +#define VF610_PAD_PTB4__VIU_FID 0x068 0x3A8 ALT5 0x0 +#define VF610_PAD_PTB4__VIU_DATA22 0x068 0x000 ALT6 0x0 +#define VF610_PAD_PTB4__QSPI1_A_DATA0 0x068 0x000 ALT7 0x0 +#define VF610_PAD_PTB5__GPIO_27 0x06C 0x000 ALT0 0x0 +#define VF610_PAD_PTB5__FTM0_CH5 0x06C 0x000 ALT1 0x0 +#define VF610_PAD_PTB5__UART1_RX 0x06C 0x37C ALT2 0x0 +#define VF610_PAD_PTB5__ADC1_SE4 0x06C 0x000 ALT3 0x0 +#define VF610_PAD_PTB5__LCD39 0x06C 0x000 ALT4 0x0 +#define VF610_PAD_PTB5__VIU_DE 0x06C 0x3A4 ALT5 0x0 +#define VF610_PAD_PTB5__QSPI1_A_DQS 0x06C 0x000 ALT7 0x0 +#define VF610_PAD_PTB6__GPIO_28 0x070 0x000 ALT0 0x0 +#define VF610_PAD_PTB6__FTM0_CH6 0x070 0x000 ALT1 0x0 +#define VF610_PAD_PTB6__UART1_RTS 0x070 0x000 ALT2 0x0 +#define VF610_PAD_PTB6__QSPI0_QPCS1_A 0x070 0x000 ALT3 0x0 +#define VF610_PAD_PTB6__LCD_LCD40 0x070 0x000 ALT4 0x0 +#define VF610_PAD_PTB6__FB_CLKOUT 0x070 0x000 ALT5 0x0 +#define VF610_PAD_PTB6__VIU_HSYNC 0x070 0x000 ALT6 0x0 +#define VF610_PAD_PTB6__UART2_TX 0x070 0x38C ALT7 0x0 +#define VF610_PAD_PTB7__GPIO_29 0x074 0x000 ALT0 0x0 +#define VF610_PAD_PTB7__FTM0_CH7 0x074 0x000 ALT1 0x0 +#define VF610_PAD_PTB7__UART1_CTS 0x074 0x378 ALT2 0x0 +#define VF610_PAD_PTB7__QSPI0_B_QPCS1 0x074 0x000 ALT3 0x0 +#define VF610_PAD_PTB7__LCD41 0x074 0x000 ALT4 0x0 +#define VF610_PAD_PTB7__VIU_VSYNC 0x074 0x000 ALT6 0x0 +#define VF610_PAD_PTB7__UART2_RX 0x074 0x388 ALT7 0x0 +#define VF610_PAD_PTB8__GPIO_30 0x078 0x000 ALT0 0x0 +#define VF610_PAD_PTB8__FTM1_CH0 0x078 0x32C ALT1 0x0 +#define VF610_PAD_PTB8__FTM1_QD_PHA 0x078 0x334 ALT3 0x1 +#define VF610_PAD_PTB8__VIU_DE 0x078 0x3A4 ALT5 0x1 +#define VF610_PAD_PTB8__DCU1_R6 0x078 0x000 ALT7 0x0 +#define VF610_PAD_PTB9__GPIO_31 0x07C 0x000 ALT0 0x0 +#define VF610_PAD_PTB9__FTM1_CH1 0x07C 0x330 ALT1 0x0 +#define VF610_PAD_PTB9__FTM1_QD_PHB 0x07C 0x338 ALT3 0x1 +#define VF610_PAD_PTB9__DCU1_R7 0x07C 0x000 ALT7 0x0 +#define VF610_PAD_PTB10__GPIO_32 0x080 0x000 ALT0 0x0 +#define VF610_PAD_PTB10__UART0_TX 0x080 0x000 ALT1 0x0 +#define VF610_PAD_PTB10__DCU0_TCON4 0x080 0x000 ALT4 0x0 +#define VF610_PAD_PTB10__VIU_DE 0x080 0x3A4 ALT5 0x2 +#define VF610_PAD_PTB10__CKO1 0x080 0x000 ALT6 0x0 +#define VF610_PAD_PTB10__ENET_TS_CLKIN 0x080 0x2F4 ALT7 0x1 +#define VF610_PAD_PTB11__GPIO_33 0x084 0x000 ALT0 0x0 +#define VF610_PAD_PTB11__UART0_RX 0x084 0x000 ALT1 0x0 +#define VF610_PAD_PTB11__DCU0_TCON5 0x084 0x000 ALT4 0x0 +#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B 0x084 0x000 ALT5 0x0 +#define VF610_PAD_PTB11__CKO2 0x084 0x000 ALT6 0x0 +#define VF610_PAD_PTB11_ENET0_1588_TMR0 0x084 0x304 ALT7 0x0 +#define VF610_PAD_PTB12__GPIO_34 0x088 0x000 ALT0 0x0 +#define VF610_PAD_PTB12__UART0_RTS 0x088 0x000 ALT1 0x0 +#define VF610_PAD_PTB12__DSPI0_CS5 0x088 0x000 ALT3 0x0 +#define VF610_PAD_PTB12__DCU0_TCON6 0x088 0x000 ALT4 0x0 +#define VF610_PAD_PTB12__FB_AD1 0x088 0x000 ALT5 0x0 +#define VF610_PAD_PTB12__NMI 0x088 0x000 ALT6 0x0 +#define VF610_PAD_PTB12__ENET0_1588_TMR1 0x088 0x308 ALT7 0x0 +#define VF610_PAD_PTB13__GPIO_35 0x08C 0x000 ALT0 0x0 +#define VF610_PAD_PTB13__UART0_CTS 0x08C 0x000 ALT1 0x0 +#define VF610_PAD_PTB13__DSPI0_CS4 0x08C 0x000 ALT3 0x0 +#define VF610_PAD_PTB13__DCU0_TCON7 0x08C 0x000 ALT4 0x0 +#define VF610_PAD_PTB13__FB_AD0 0x08C 0x000 ALT5 0x0 +#define VF610_PAD_PTB13__TRACE_CTL 0x08C 0x000 ALT6 0x0 +#define VF610_PAD_PTB14__GPIO_36 0x090 0x000 ALT0 0x0 +#define VF610_PAD_PTB14__CAN0_RX 0x090 0x000 ALT1 0x0 +#define VF610_PAD_PTB14__I2C0_SCL 0x090 0x33C ALT2 0x1 +#define VF610_PAD_PTB14__DCU0_TCON8 0x090 0x000 ALT4 0x0 +#define VF610_PAD_PTB14__DCU1_PCLK 0x090 0x000 ALT7 0x0 +#define VF610_PAD_PTB15__GPIO_37 0x094 0x000 ALT0 0x0 +#define VF610_PAD_PTB15__CAN0_TX 0x094 0x000 ALT1 0x0 +#define VF610_PAD_PTB15__I2C0_SDA 0x094 0x340 ALT2 0x1 +#define VF610_PAD_PTB15__DCU0_TCON9 0x094 0x000 ALT4 0x0 +#define VF610_PAD_PTB15__VIU_PIX_CLK 0x094 0x3AC ALT7 0x0 +#define VF610_PAD_PTB16__GPIO_38 0x098 0x000 ALT0 0x0 +#define VF610_PAD_PTB16__CAN1_RX 0x098 0x000 ALT1 0x0 +#define VF610_PAD_PTB16__I2C1_SCL 0x098 0x344 ALT2 0x1 +#define VF610_PAD_PTB16__DCU0_TCON10 0x098 0x000 ALT4 0x0 +#define VF610_PAD_PTB17__GPIO_39 0x09C 0x000 ALT0 0x0 +#define VF610_PAD_PTB17__CAN1_TX 0x09C 0x000 ALT1 0x0 +#define VF610_PAD_PTB17__I2C1_SDA 0x09C 0x348 ALT2 0x1 +#define VF610_PAD_PTB17__DCU0_TCON11 0x09C 0x000 ALT4 0x0 +#define VF610_PAD_PTB18__GPIO_40 0x0A0 0x000 ALT0 0x0 +#define VF610_PAD_PTB18__DSPI0_CS1 0x0A0 0x000 ALT1 0x0 +#define VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x0A0 0x2EC ALT2 0x2 +#define VF610_PAD_PTB18__VIU_DATA9 0x0A0 0x000 ALT6 0x0 +#define VF610_PAD_PTB19__GPIO_41 0x0A4 0x000 ALT0 0x0 +#define VF610_PAD_PTB19__DSPI0_CS0 0x0A4 0x000 ALT1 0x0 +#define VF610_PAD_PTB19__VIU_DATA10 0x0A4 0x000 ALT6 0x0 +#define VF610_PAD_PTB20__GPIO_42 0x0A8 0x000 ALT0 0x0 +#define VF610_PAD_PTB20__DSPI0_SIN 0x0A8 0x000 ALT1 0x0 +#define VF610_PAD_PTB20__LCD42 0x0A8 0x000 ALT4 0x0 +#define VF610_PAD_PTB20__VIU_DATA11 0x0A8 0x000 ALT6 0x0 +#define VF610_PAD_PTB21__GPIO_43 0x0AC 0x000 ALT0 0x0 +#define VF610_PAD_PTB21__DSPI0_SOUT 0x0AC 0x000 ALT1 0x0 +#define VF610_PAD_PTB21__LCD43 0x0AC 0x000 ALT4 0x0 +#define VF610_PAD_PTB21__VIU_DATA12 0x0AC 0x000 ALT6 0x0 +#define VF610_PAD_PTB21__DCU1_PCLK 0x0AC 0x000 ALT7 0x0 +#define VF610_PAD_PTB22__GPIO_44 0x0B0 0x000 ALT0 0x0 +#define VF610_PAD_PTB22__DSPI0_SCK 0x0B0 0x000 ALT1 0x0 +#define VF610_PAD_PTB22__VLCD 0x0B0 0x000 ALT4 0x0 +#define VF610_PAD_PTB22__VIU_FID 0x0B0 0x3A8 ALT5 0x1 +#define VF610_PAD_PTC0__GPIO_45 0x0B4 0x000 ALT0 0x0 +#define VF610_PAD_PTC0__ENET_RMII0_MDC 0x0B4 0x000 ALT1 0x0 +#define VF610_PAD_PTC0__FTM1_CH0 0x0B4 0x32C ALT2 0x1 +#define VF610_PAD_PTC0__DSPI0_CS3 0x0B4 0x000 ALT3 0x0 +#define VF610_PAD_PTC0__ESAI_SCKT 0x0B4 0x310 ALT4 0x0 +#define VF610_PAD_PTC0__ESDHC0_CLK 0x0B4 0x000 ALT5 0x0 +#define VF610_PAD_PTC0__VIU_DATA0 0x0B4 0x000 ALT6 0x0 +#define VF610_PAD_PTC0__SRC_RCON18 0x0B4 0x398 ALT7 0x0 +#define VF610_PAD_PTC1__GPIO_46 0x0B8 0x000 ALT0 0x0 +#define VF610_PAD_PTC1__ENET_RMII0_MDIO 0x0B8 0x000 ALT1 0x0 +#define VF610_PAD_PTC1__FTM1_CH1 0x0B8 0x330 ALT2 0x1 +#define VF610_PAD_PTC1__DSPI0_CS2 0x0B8 0x000 ALT3 0x0 +#define VF610_PAD_PTC1__ESAI_FST 0x0B8 0x30C ALT4 0x0 +#define VF610_PAD_PTC1__ESDHC0_CMD 0x0B8 0x000 ALT5 0x0 +#define VF610_PAD_PTC1__VIU_DATA1 0x0B8 0x000 ALT6 0x0 +#define VF610_PAD_PTC1__SRC_RCON19 0x0B8 0x39C ALT7 0x0 +#define VF610_PAD_PTC2__GPIO_47 0x0BC 0x000 ALT0 0x0 +#define VF610_PAD_PTC2__ENET_RMII0_CRS 0x0BC 0x000 ALT1 0x0 +#define VF610_PAD_PTC2__UART1_TX 0x0BC 0x380 ALT2 0x1 +#define VF610_PAD_PTC2__ESAI_SDO0 0x0BC 0x314 ALT4 0x0 +#define VF610_PAD_PTC2__ESDHC0_DAT0 0x0BC 0x000 ALT5 0x0 +#define VF610_PAD_PTC2__VIU_DATA2 0x0BC 0x000 ALT6 0x0 +#define VF610_PAD_PTC2__SRC_RCON20 0x0BC 0x3A0 ALT7 0x0 +#define VF610_PAD_PTC3__GPIO_48 0x0C0 0x000 ALT0 0x0 +#define VF610_PAD_PTC3__ENET_RMII0_RXD1 0x0C0 0x000 ALT1 0x0 +#define VF610_PAD_PTC3__UART1_RX 0x0C0 0x37C ALT2 0x1 +#define VF610_PAD_PTC3__ESAI_SDO1 0x0C0 0x318 ALT4 0x0 +#define VF610_PAD_PTC3__ESDHC0_DAT1 0x0C0 0x000 ALT5 0x0 +#define VF610_PAD_PTC3__VIU_DATA3 0x0C0 0x000 ALT6 0x0 +#define VF610_PAD_PTC3__DCU0_R0 0x0C0 0x000 ALT7 0x0 +#define VF610_PAD_PTC4__GPIO_49 0x0C4 0x000 ALT0 0x0 +#define VF610_PAD_PTC4__ENET_RMII0_RXD0 0x0C4 0x000 ALT1 0x0 +#define VF610_PAD_PTC4__UART1_RTS 0x0C4 0x000 ALT2 0x0 +#define VF610_PAD_PTC4__DSPI1_CS1 0x0C4 0x000 ALT3 0x0 +#define VF610_PAD_PTC4__ESAI_SDO2 0x0C4 0x31C ALT4 0x0 +#define VF610_PAD_PTC4__ESDHC0_DAT2 0x0C4 0x000 ALT5 0x0 +#define VF610_PAD_PTC4__VIU_DATA4 0x0C4 0x000 ALT6 0x0 +#define VF610_PAD_PTC4__DCU0_R1 0x0C4 0x000 ALT7 0x0 +#define VF610_PAD_PTC5__GPIO_50 0x0C8 0x000 ALT0 0x0 +#define VF610_PAD_PTC5__ENET_RMII0_RXER 0x0C8 0x000 ALT1 0x0 +#define VF610_PAD_PTC5__UART1_CTS 0x0C8 0x378 ALT2 0x1 +#define VF610_PAD_PTC5__DSPI1_CS0 0x0C8 0x300 ALT3 0x0 +#define VF610_PAD_PTC5__ESAI_SDO3 0x0C8 0x320 ALT4 0x0 +#define VF610_PAD_PTC5__ESDHC0_DAT3 0x0C8 0x000 ALT5 0x0 +#define VF610_PAD_PTC5__VIU_DATA5 0x0C8 0x000 ALT6 0x0 +#define VF610_PAD_PTC5__DCU0_G0 0x0C8 0x000 ALT7 0x0 +#define VF610_PAD_PTC6__GPIO_51 0x0CC 0x000 ALT0 0x0 +#define VF610_PAD_PTC6__ENET_RMII0_TXD1 0x0CC 0x000 ALT1 0x0 +#define VF610_PAD_PTC6__DSPI1_SIN 0x0CC 0x2FC ALT3 0x0 +#define VF610_PAD_PTC6__ESAI_SDI0 0x0CC 0x328 ALT4 0x0 +#define VF610_PAD_PTC6__ESDHC0_WP 0x0CC 0x000 ALT5 0x0 +#define VF610_PAD_PTC6__VIU_DATA6 0x0CC 0x000 ALT6 0x0 +#define VF610_PAD_PTC6__DCU0_G1 0x0CC 0x000 ALT7 0x0 +#define VF610_PAD_PTC7__GPIO_52 0x0D0 0x000 ALT0 0x0 +#define VF610_PAD_PTC7__ENET_RMII0_TXD0 0x0D0 0x000 ALT1 0x0 +#define VF610_PAD_PTC7__DSPI1_SOUT 0x0D0 0x000 ALT3 0x0 +#define VF610_PAD_PTC7__ESAI_SDI1 0x0D0 0x324 ALT4 0x0 +#define VF610_PAD_PTC7__VIU_DATA7 0x0D0 0x000 ALT6 0x0 +#define VF610_PAD_PTC7__DCU0_B0 0x0D0 0x000 ALT7 0x0 +#define VF610_PAD_PTC8__GPIO_53 0x0D4 0x000 ALT0 0x0 +#define VF610_PAD_PTC8__ENET_RMII0_TXEN 0x0D4 0x000 ALT1 0x0 +#define VF610_PAD_PTC8__DSPI1_SCK 0x0D4 0x2F8 ALT3 0x0 +#define VF610_PAD_PTC8__VIU_DATA8 0x0D4 0x000 ALT6 0x0 +#define VF610_PAD_PTC8__DCU0_B1 0x0D4 0x000 ALT7 0x0 +#define VF610_PAD_PTC9__GPIO_54 0x0D8 0x000 ALT0 0x0 +#define VF610_PAD_PTC9__ENET_RMII1_MDC 0x0D8 0x000 ALT1 0x0 +#define VF610_PAD_PTC9__ESAI_SCKT 0x0D8 0x310 ALT3 0x1 +#define VF610_PAD_PTC9__MLB_CLK 0x0D8 0x354 ALT6 0x1 +#define VF610_PAD_PTC9__DEBUG_OUT0 0x0D8 0x000 ALT7 0x0 +#define VF610_PAD_PTC10__GPIO_55 0x0DC 0x000 ALT0 0x0 +#define VF610_PAD_PTC10__ENET_RMII1_MDIO 0x0DC 0x000 ALT1 0x0 +#define VF610_PAD_PTC10__ESAI_FST 0x0DC 0x30C ALT3 0x1 +#define VF610_PAD_PTC10__MLB_SIGNAL 0x0DC 0x35C ALT6 0x1 +#define VF610_PAD_PTC10__DEBUG_OUT1 0x0DC 0x000 ALT7 0x0 +#define VF610_PAD_PTC11__GPIO_56 0x0E0 0x000 ALT0 0x0 +#define VF610_PAD_PTC11__ENET_RMII1_CRS 0x0E0 0x000 ALT1 0x0 +#define VF610_PAD_PTC11__ESAI_SDO0 0x0E0 0x314 ALT3 0x1 +#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1 +#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0 +#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0 +#define VF610_PAD_PTC12__ENET_RMII_RXD1 0x0E4 0x000 ALT1 0x0 +#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1 +#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1 +#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0 +#define VF610_PAD_PTC13__GPIO_58 0x0E8 0x000 ALT0 0x0 +#define VF610_PAD_PTC13__ENET_RMII1_RXD0 0x0E8 0x000 ALT1 0x0 +#define VF610_PAD_PTC13__ESAI_SDO2 0x0E8 0x31C ALT3 0x1 +#define VF610_PAD_PTC13__SAI2_RX_BCLK 0x0E8 0x364 ALT5 0x2 +#define VF610_PAD_PTC13__DEBUG_OUT4 0x0E8 0x000 ALT7 0x0 +#define VF610_PAD_PTC14__GPIO_59 0x0EC 0x000 ALT0 0x0 +#define VF610_PAD_PTC14__ENET_RMII1_RXER 0x0EC 0x000 ALT1 0x0 +#define VF610_PAD_PTC14__ESAI_SDO3 0x0EC 0x320 ALT3 0x1 +#define VF610_PAD_PTC14__UART5_TX 0x0EC 0x000 ALT4 0x0 +#define VF610_PAD_PTC14__SAI2_RX_DATA 0x0EC 0x368 ALT5 0x2 +#define VF610_PAD_PTC14__ADC0_SE6 0x0EC 0x000 ALT6 0x0 +#define VF610_PAD_PTC14__DEBUG_OUT5 0x0EC 0x000 ALT7 0x0 +#define VF610_PAD_PTC15__GPIO_60 0x0F0 0x000 ALT0 0x0 +#define VF610_PAD_PTC15__ENET_RMII1_TXD1 0x0F0 0x000 ALT1 0x0 +#define VF610_PAD_PTC15__ESAI_SDI0 0x0F0 0x328 ALT3 0x1 +#define VF610_PAD_PTC15__UART5_RX 0x0F0 0x000 ALT4 0x0 +#define VF610_PAD_PTC15__SAI2_TX_DATA 0x0F0 0x000 ALT5 0x0 +#define VF610_PAD_PTC15__ADC0_SE7 0x0F0 0x000 ALT6 0x0 +#define VF610_PAD_PTC15__DEBUG_OUT6 0x0F0 0x000 ALT7 0x0 +#define VF610_PAD_PTC16__GPIO_61 0x0F4 0x000 ALT0 0x0 +#define VF610_PAD_PTC16__ENET_RMII1_TXD0 0x0F4 0x000 ALT1 0x0 +#define VF610_PAD_PTC16__ESAI_SDI1 0x0F4 0x324 ALT3 0x1 +#define VF610_PAD_PTC16__UART5_RTS 0x0F4 0x000 ALT4 0x0 +#define VF610_PAD_PTC16__SAI2_RX_SYNC 0x0F4 0x36C ALT5 0x2 +#define VF610_PAD_PTC16__ADC1_SE6 0x0F4 0x000 ALT6 0x0 +#define VF610_PAD_PTC16__DEBUG_OUT7 0x0F4 0x000 ALT7 0x0 +#define VF610_PAD_PTC17__GPIO_62 0x0F8 0x000 ALT0 0x0 +#define VF610_PAD_PTC17__ENET_RMII1_TXEN 0x0F8 0x000 ALT1 0x0 +#define VF610_PAD_PTC17__ADC1_SE7 0x0F8 0x000 ALT3 0x0 +#define VF610_PAD_PTC17__UART5_CTS 0x0F8 0x000 ALT4 0x0 +#define VF610_PAD_PTC17__SAI2_TX_SYNC 0x0F8 0x374 ALT5 0x1 +#define VF610_PAD_PTC17__USB1_SOF_PULSE 0x0F8 0x000 ALT6 0x0 +#define VF610_PAD_PTC17__DEBUG_OUT8 0x0F8 0x000 ALT7 0x0 +#define VF610_PAD_PTD31__GPIO_63 0x0FC 0x000 ALT0 0x0 +#define VF610_PAD_PTD31__FB_AD31 0x0FC 0x000 ALT1 0x0 +#define VF610_PAD_PTD31__NF_IO15 0x0FC 0x000 ALT2 0x0 +#define VF610_PAD_PTD31__FTM3_CH0 0x0FC 0x000 ALT4 0x0 +#define VF610_PAD_PTD31__DSPI2_CS1 0x0FC 0x000 ALT5 0x0 +#define VF610_PAD_PTD31__DEBUG_OUT9 0x0FC 0x000 ALT7 0x0 +#define VF610_PAD_PTD30__GPIO_64 0x100 0x000 ALT0 0x0 +#define VF610_PAD_PTD30__FB_AD30 0x100 0x000 ALT1 0x0 +#define VF610_PAD_PTD30__NF_IO14 0x100 0x000 ALT2 0x0 +#define VF610_PAD_PTD30__FTM3_CH1 0x100 0x000 ALT4 0x0 +#define VF610_PAD_PTD30__DSPI2_CS0 0x100 0x000 ALT5 0x0 +#define VF610_PAD_PTD30__DEBUG_OUT10 0x100 0x000 ALT7 0x0 +#define VF610_PAD_PTD29__GPIO_65 0x104 0x000 ALT0 0x0 +#define VF610_PAD_PTD29__FB_AD29 0x104 0x000 ALT1 0x0 +#define VF610_PAD_PTD29__NF_IO13 0x104 0x000 ALT2 0x0 +#define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0 +#define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0 +#define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0 +#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 +#define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0 +#define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0 +#define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1 +#define VF610_PAD_PTD28__FTM3_CH3 0x108 0x000 ALT4 0x0 +#define VF610_PAD_PTD28__DSPI2_SOUT 0x108 0x000 ALT5 0x0 +#define VF610_PAD_PTD28__DEBUG_OUT12 0x108 0x000 ALT7 0x0 +#define VF610_PAD_PTD27__GPIO_67 0x10C 0x000 ALT0 0x0 +#define VF610_PAD_PTD27__FB_AD27 0x10C 0x000 ALT1 0x0 +#define VF610_PAD_PTD27__NF_IO11 0x10C 0x000 ALT2 0x0 +#define VF610_PAD_PTD27__I2C2_SDA 0x10C 0x350 ALT3 0x1 +#define VF610_PAD_PTD27__FTM3_CH4 0x10C 0x000 ALT4 0x0 +#define VF610_PAD_PTD27__DSPI2_SCK 0x10C 0x000 ALT5 0x0 +#define VF610_PAD_PTD27__DEBUG_OUT13 0x10C 0x000 ALT7 0x0 +#define VF610_PAD_PTD26__GPIO_68 0x110 0x000 ALT0 0x0 +#define VF610_PAD_PTD26__FB_AD26 0x110 0x000 ALT1 0x0 +#define VF610_PAD_PTD26__NF_IO10 0x110 0x000 ALT2 0x0 +#define VF610_PAD_PTD26__FTM3_CH5 0x110 0x000 ALT4 0x0 +#define VF610_PAD_PTD26__ESDHC1_WP 0x110 0x000 ALT5 0x0 +#define VF610_PAD_PTD26__DEBUG_OUT14 0x110 0x000 ALT7 0x0 +#define VF610_PAD_PTD25__GPIO_69 0x114 0x000 ALT0 0x0 +#define VF610_PAD_PTD25__FB_AD25 0x114 0x000 ALT1 0x0 +#define VF610_PAD_PTD25__NF_IO9 0x114 0x000 ALT2 0x0 +#define VF610_PAD_PTD25__FTM3_CH6 0x114 0x000 ALT4 0x0 +#define VF610_PAD_PTD25__DEBUG_OUT15 0x114 0x000 ALT7 0x0 +#define VF610_PAD_PTD24__GPIO_70 0x118 0x000 ALT0 0x0 +#define VF610_PAD_PTD24__FB_AD24 0x118 0x000 ALT1 0x0 +#define VF610_PAD_PTD24__NF_IO8 0x118 0x000 ALT2 0x0 +#define VF610_PAD_PTD24__FTM3_CH7 0x118 0x000 ALT4 0x0 +#define VF610_PAD_PTD24__DEBUG_OUT16 0x118 0x000 ALT7 0x0 +#define VF610_PAD_PTD23__GPIO_71 0x11C 0x000 ALT0 0x0 +#define VF610_PAD_PTD23__FB_AD23 0x11C 0x000 ALT1 0x0 +#define VF610_PAD_PTD23__NF_IO7 0x11C 0x000 ALT2 0x0 +#define VF610_PAD_PTD23__FTM2_CH0 0x11C 0x000 ALT3 0x0 +#define VF610_PAD_PTD23__ENET0_1588_TMR0 0x11C 0x304 ALT4 0x1 +#define VF610_PAD_PTD23__ESDHC0_DAT4 0x11C 0x000 ALT5 0x0 +#define VF610_PAD_PTD23__UART2_TX 0x11C 0x38C ALT6 0x1 +#define VF610_PAD_PTD23__DCU1_R3 0x11C 0x000 ALT7 0x0 +#define VF610_PAD_PTD22__GPIO_72 0x120 0x000 ALT0 0x0 +#define VF610_PAD_PTD22__FB_AD22 0x120 0x000 ALT1 0x0 +#define VF610_PAD_PTD22__NF_IO6 0x120 0x000 ALT2 0x0 +#define VF610_PAD_PTD22__FTM2_CH1 0x120 0x000 ALT3 0x0 +#define VF610_PAD_PTD22__ENET0_1588_TMR1 0x120 0x308 ALT4 0x1 +#define VF610_PAD_PTD22__ESDHC0_DAT5 0x120 0x000 ALT5 0x0 +#define VF610_PAD_PTD22__UART2_RX 0x120 0x388 ALT6 0x1 +#define VF610_PAD_PTD22__DCU1_R4 0x120 0x000 ALT7 0x0 +#define VF610_PAD_PTD21__GPIO_73 0x124 0x000 ALT0 0x0 +#define VF610_PAD_PTD21__FB_AD21 0x124 0x000 ALT1 0x0 +#define VF610_PAD_PTD21__NF_IO5 0x124 0x000 ALT2 0x0 +#define VF610_PAD_PTD21__ENET0_1588_TMR2 0x124 0x000 ALT4 0x0 +#define VF610_PAD_PTD21__ESDHC0_DAT6 0x124 0x000 ALT5 0x0 +#define VF610_PAD_PTD21__UART2_RTS 0x124 0x000 ALT6 0x0 +#define VF610_PAD_PTD21__DCU1_R5 0x124 0x000 ALT7 0x0 +#define VF610_PAD_PTD20__GPIO_74 0x128 0x000 ALT0 0x0 +#define VF610_PAD_PTD20__FB_AD20 0x128 0x000 ALT1 0x0 +#define VF610_PAD_PTD20__NF_IO4 0x128 0x000 ALT2 0x0 +#define VF610_PAD_PTD20__ENET0_1588_TMR3 0x128 0x000 ALT4 0x0 +#define VF610_PAD_PTD20__ESDHC0_DAT7 0x128 0x000 ALT5 0x0 +#define VF610_PAD_PTD20__UART2_CTS 0x128 0x384 ALT6 0x0 +#define VF610_PAD_PTD20__DCU1_R0 0x128 0x000 ALT7 0x0 +#define VF610_PAD_PTD19__GPIO_75 0x12C 0x000 ALT0 0x0 +#define VF610_PAD_PTD19__FB_AD19 0x12C 0x000 ALT1 0x0 +#define VF610_PAD_PTD19__NF_IO3 0x12C 0x000 ALT2 0x0 +#define VF610_PAD_PTD19__ESAI_SCKR 0x12C 0x000 ALT3 0x0 +#define VF610_PAD_PTD19__I2C0_SCL 0x12C 0x33C ALT4 0x2 +#define VF610_PAD_PTD19__FTM2_QD_PHA 0x12C 0x000 ALT5 0x0 +#define VF610_PAD_PTD19__DCU1_R1 0x12C 0x000 ALT7 0x0 +#define VF610_PAD_PTD18__GPIO_76 0x130 0x000 ALT0 0x0 +#define VF610_PAD_PTD18__FB_AD18 0x130 0x000 ALT1 0x0 +#define VF610_PAD_PTD18__NF_IO2 0x130 0x000 ALT2 0x0 +#define VF610_PAD_PTD18__ESAI_FSR 0x130 0x000 ALT3 0x0 +#define VF610_PAD_PTD18__I2C0_SDA 0x130 0x340 ALT4 0x2 +#define VF610_PAD_PTD18__FTM2_QD_PHB 0x130 0x000 ALT5 0x0 +#define VF610_PAD_PTD18__DCU1_G0 0x130 0x000 ALT7 0x0 +#define VF610_PAD_PTD17__GPIO_77 0x134 0x000 ALT0 0x0 +#define VF610_PAD_PTD17__FB_AD17 0x134 0x000 ALT1 0x0 +#define VF610_PAD_PTD17__NF_IO1 0x134 0x000 ALT2 0x0 +#define VF610_PAD_PTD17__ESAI_HCKR 0x134 0x000 ALT3 0x0 +#define VF610_PAD_PTD17__I2C1_SCL 0x134 0x344 ALT4 0x2 +#define VF610_PAD_PTD17__DCU1_G1 0x134 0x000 ALT7 0x0 +#define VF610_PAD_PTD16__GPIO_78 0x138 0x000 ALT0 0x0 +#define VF610_PAD_PTD16__FB_AD16 0x138 0x000 ALT1 0x0 +#define VF610_PAD_PTD16__NF_IO0 0x138 0x000 ALT2 0x0 +#define VF610_PAD_PTD16__ESAI_HCKT 0x138 0x000 ALT3 0x0 +#define VF610_PAD_PTD16__I2C1_SDA 0x138 0x348 ALT4 0x2 +#define VF610_PAD_PTD16__DCU1_G2 0x138 0x000 ALT7 0x0 +#define VF610_PAD_PTD0__GPIO_79 0x13C 0x000 ALT0 0x0 +#define VF610_PAD_PTD0__QSPI0_A_QSCK 0x13C 0x000 ALT1 0x0 +#define VF610_PAD_PTD0__UART2_TX 0x13C 0x38C ALT2 0x2 +#define VF610_PAD_PTD0__FB_AD15 0x13C 0x000 ALT4 0x0 +#define VF610_PAD_PTD0__SPDIF_EXTCLK 0x13C 0x000 ALT5 0x0 +#define VF610_PAD_PTD0__DEBUG_OUT17 0x13C 0x000 ALT7 0x0 +#define VF610_PAD_PTD1__GPIO_80 0x140 0x000 ALT0 0x0 +#define VF610_PAD_PTD1__QSPI0_A_CS0 0x140 0x000 ALT1 0x0 +#define VF610_PAD_PTD1__UART2_RX 0x140 0x388 ALT2 0x2 +#define VF610_PAD_PTD1__FB_AD14 0x140 0x000 ALT4 0x0 +#define VF610_PAD_PTD1__SPDIF_IN1 0x140 0x000 ALT5 0x0 +#define VF610_PAD_PTD1__DEBUG_OUT18 0x140 0x000 ALT7 0x0 +#define VF610_PAD_PTD2__GPIO_81 0x144 0x000 ALT0 0x0 +#define VF610_PAD_PTD2__QSPI0_A_DATA3 0x144 0x000 ALT1 0x0 +#define VF610_PAD_PTD2__UART2_RTS 0x144 0x000 ALT2 0x0 +#define VF610_PAD_PTD2__DSPI1_CS3 0x144 0x000 ALT3 0x0 +#define VF610_PAD_PTD2__FB_AD13 0x144 0x000 ALT4 0x0 +#define VF610_PAD_PTD2__SPDIF_OUT1 0x144 0x000 ALT5 0x0 +#define VF610_PAD_PTD2__DEBUG_OUT19 0x144 0x000 ALT7 0x0 +#define VF610_PAD_PTD3__GPIO_82 0x148 0x000 ALT0 0x0 +#define VF610_PAD_PTD3__QSPI0_A_DATA2 0x148 0x000 ALT1 0x0 +#define VF610_PAD_PTD3__UART2_CTS 0x148 0x384 ALT2 0x1 +#define VF610_PAD_PTD3__DSPI1_CS2 0x148 0x000 ALT3 0x0 +#define VF610_PAD_PTD3__FB_AD12 0x148 0x000 ALT4 0x0 +#define VF610_PAD_PTD3__SPDIF_PLOCK 0x148 0x000 ALT5 0x0 +#define VF610_PAD_PTD3__DEBUG_OUT20 0x148 0x000 ALT7 0x0 +#define VF610_PAD_PTD4__GPIO_83 0x14C 0x000 ALT0 0x0 +#define VF610_PAD_PTD4__QSPI0_A_DATA1 0x14C 0x000 ALT1 0x0 +#define VF610_PAD_PTD4__DSPI1_CS1 0x14C 0x000 ALT3 0x0 +#define VF610_PAD_PTD4__FB_AD11 0x14C 0x000 ALT4 0x0 +#define VF610_PAD_PTD4__SPDIF_SRCLK 0x14C 0x000 ALT5 0x0 +#define VF610_PAD_PTD4__DEBUG_OUT21 0x14C 0x000 ALT7 0x0 +#define VF610_PAD_PTD5__GPIO_84 0x150 0x000 ALT0 0x0 +#define VF610_PAD_PTD5__QSPI0_A_DATA0 0x150 0x000 ALT1 0x0 +#define VF610_PAD_PTD5__DSPI1_CS0 0x150 0x300 ALT3 0x1 +#define VF610_PAD_PTD5__FB_AD10 0x150 0x000 ALT4 0x0 +#define VF610_PAD_PTD5__DEBUG_OUT22 0x150 0x000 ALT7 0x0 +#define VF610_PAD_PTD6__GPIO_85 0x154 0x000 ALT0 0x0 +#define VF610_PAD_PTD6__QSPI1_A_DQS 0x154 0x000 ALT1 0x0 +#define VF610_PAD_PTD6__DSPI1_SIN 0x154 0x2FC ALT3 0x1 +#define VF610_PAD_PTD6__FB_AD9 0x154 0x000 ALT4 0x0 +#define VF610_PAD_PTD6__DEBUG_OUT23 0x154 0x000 ALT7 0x0 +#define VF610_PAD_PTD7__GPIO_86 0x158 0x000 ALT0 0x0 +#define VF610_PAD_PTD7__QSPI0_B_QSCK 0x158 0x000 ALT1 0x0 +#define VF610_PAD_PTD7__DSPI1_SOUT 0x158 0x000 ALT3 0x0 +#define VF610_PAD_PTD7__FB_AD8 0x158 0x000 ALT4 0x0 +#define VF610_PAD_PTD7__DEBUG_OUT24 0x158 0x000 ALT7 0x0 +#define VF610_PAD_PTD8__GPIO_87 0x15C 0x000 ALT0 0x0 +#define VF610_PAD_PTD8__QSPI0_B_CS0 0x15C 0x000 ALT1 0x0 +#define VF610_PAD_PTD8__FB_CLKOUT 0x15C 0x000 ALT2 0x0 +#define VF610_PAD_PTD8__DSPI1_SCK 0x15C 0x2F8 ALT3 0x1 +#define VF610_PAD_PTD8__FB_AD7 0x15C 0x000 ALT4 0x0 +#define VF610_PAD_PTD8__DEBUG_OUT25 0x15C 0x000 ALT7 0x0 +#define VF610_PAD_PTD9__GPIO_88 0x160 0x000 ALT0 0x0 +#define VF610_PAD_PTD9__QSPI0_B_DATA3 0x160 0x000 ALT1 0x0 +#define VF610_PAD_PTD9__DSPI3_CS1 0x160 0x000 ALT2 0x0 +#define VF610_PAD_PTD9__FB_AD6 0x160 0x000 ALT4 0x0 +#define VF610_PAD_PTD9__SAI1_TX_SYNC 0x160 0x360 ALT6 0x0 +#define VF610_PAD_PTD9__DCU1_B0 0x160 0x000 ALT7 0x0 +#define VF610_PAD_PTD10__GPIO_89 0x164 0x000 ALT0 0x0 +#define VF610_PAD_PTD10__QSPI0_B_DATA2 0x164 0x000 ALT1 0x0 +#define VF610_PAD_PTD10__DSPI3_CS0 0x164 0x000 ALT2 0x0 +#define VF610_PAD_PTD10__FB_AD5 0x164 0x000 ALT4 0x0 +#define VF610_PAD_PTD10__DCU1_B1 0x164 0x000 ALT7 0x0 +#define VF610_PAD_PTD11__GPIO_90 0x168 0x000 ALT0 0x0 +#define VF610_PAD_PTD11__QSPI0_B_DATA1 0x168 0x000 ALT1 0x0 +#define VF610_PAD_PTD11__DSPI3_SIN 0x168 0x000 ALT2 0x0 +#define VF610_PAD_PTD11__FB_AD4 0x168 0x000 ALT4 0x0 +#define VF610_PAD_PTD11__DEBUG_OUT26 0x168 0x000 ALT7 0x0 +#define VF610_PAD_PTD12__GPIO_91 0x16C 0x000 ALT0 0x0 +#define VF610_PAD_PTD12__QSPI0_B_DATA0 0x16C 0x000 ALT1 0x0 +#define VF610_PAD_PTD12__DSPI3_SOUT 0x16C 0x000 ALT2 0x0 +#define VF610_PAD_PTD12__FB_AD3 0x16C 0x000 ALT4 0x0 +#define VF610_PAD_PTD12__DEBUG_OUT27 0x16C 0x000 ALT7 0x0 +#define VF610_PAD_PTD13__GPIO_92 0x170 0x000 ALT0 0x0 +#define VF610_PAD_PTD13__QSPI0_B_DQS 0x170 0x000 ALT1 0x0 +#define VF610_PAD_PTD13__DSPI3_SCK 0x170 0x000 ALT2 0x0 +#define VF610_PAD_PTD13__FB_AD2 0x170 0x000 ALT4 0x0 +#define VF610_PAD_PTD13__DEBUG_OUT28 0x170 0x000 ALT7 0x0 +#define VF610_PAD_PTB23__GPIO_93 0x174 0x000 ALT0 0x0 +#define VF610_PAD_PTB23__SAI0_TX_BCLK 0x174 0x000 ALT1 0x0 +#define VF610_PAD_PTB23__UART1_TX 0x174 0x380 ALT2 0x2 +#define VF610_PAD_PTB23__SRC_RCON18 0x174 0x398 ALT3 0x1 +#define VF610_PAD_PTB23__FB_MUXED_ALE 0x174 0x000 ALT4 0x0 +#define VF610_PAD_PTB23__FB_TS_B 0x174 0x000 ALT5 0x0 +#define VF610_PAD_PTB23__UART3_RTS 0x174 0x000 ALT6 0x0 +#define VF610_PAD_PTB23__DCU1_G3 0x174 0x000 ALT7 0x0 +#define VF610_PAD_PTB24__GPIO_94 0x178 0x000 ALT0 0x0 +#define VF610_PAD_PTB24__SAI0_RX_BCLK 0x178 0x000 ALT1 0x0 +#define VF610_PAD_PTB24__UART1_RX 0x178 0x37C ALT2 0x2 +#define VF610_PAD_PTB24__SRC_RCON19 0x178 0x39C ALT3 0x1 +#define VF610_PAD_PTB24__FB_MUXED_TSIZ0 0x178 0x000 ALT4 0x0 +#define VF610_PAD_PTB24__NF_WE_B 0x178 0x000 ALT5 0x0 +#define VF610_PAD_PTB24__UART3_CTS 0x178 0x000 ALT6 0x0 +#define VF610_PAD_PTB24__DCU1_G4 0x178 0x000 ALT7 0x0 +#define VF610_PAD_PTB25__GPIO_95 0x17C 0x000 ALT0 0x0 +#define VF610_PAD_PTB25__SAI0_RX_DATA 0x17C 0x000 ALT1 0x0 +#define VF610_PAD_PTB25__UART1_RTS 0x17C 0x000 ALT2 0x0 +#define VF610_PAD_PTB25__SRC_RCON20 0x17C 0x3A0 ALT3 0x1 +#define VF610_PAD_PTB25__FB_CS1_B 0x17C 0x000 ALT4 0x0 +#define VF610_PAD_PTB25__NF_CE0_B 0x17C 0x000 ALT5 0x0 +#define VF610_PAD_PTB25__DCU1_G5 0x17C 0x000 ALT7 0x0 +#define VF610_PAD_PTB26__GPIO_96 0x180 0x000 ALT0 0x0 +#define VF610_PAD_PTB26__SAI0_TX_DATA 0x180 0x000 ALT1 0x0 +#define VF610_PAD_PTB26__UART1_CTS 0x180 0x378 ALT2 0x2 +#define VF610_PAD_PTB26__SRC_RCON21 0x180 0x000 ALT3 0x0 +#define VF610_PAD_PTB26__FB_CS0_B 0x180 0x000 ALT4 0x0 +#define VF610_PAD_PTB26__NF_CE1_B 0x180 0x000 ALT5 0x0 +#define VF610_PAD_PTB26__DCU1_G6 0x180 0x000 ALT7 0x0 +#define VF610_PAD_PTB27__GPIO_97 0x184 0x000 ALT0 0x0 +#define VF610_PAD_PTB27__SAI0_RX_SYNC 0x184 0x000 ALT1 0x0 +#define VF610_PAD_PTB27__SRC_RCON22 0x184 0x000 ALT3 0x0 +#define VF610_PAD_PTB27__FB_OE_B 0x184 0x000 ALT4 0x0 +#define VF610_PAD_PTB27__FB_MUXED_TBST_B 0x184 0x000 ALT5 0x0 +#define VF610_PAD_PTB27__NF_RE_B 0x184 0x000 ALT6 0x0 +#define VF610_PAD_PTB27__DCU1_G7 0x184 0x000 ALT7 0x0 +#define VF610_PAD_PTB28__GPIO_98 0x188 0x000 ALT0 0x0 +#define VF610_PAD_PTB28__SAI0_TX_SYNC 0x188 0x000 ALT1 0x0 +#define VF610_PAD_PTB28__SRC_RCON23 0x188 0x000 ALT3 0x0 +#define VF610_PAD_PTB28__FB_RW_B 0x188 0x000 ALT4 0x0 +#define VF610_PAD_PTB28__DCU1_B6 0x188 0x000 ALT7 0x0 +#define VF610_PAD_PTC26__GPIO_99 0x18C 0x000 ALT0 0x0 +#define VF610_PAD_PTC26__SAI1_TX_BCLK 0x18C 0x000 ALT1 0x0 +#define VF610_PAD_PTC26__DSPI0_CS5 0x18C 0x000 ALT2 0x0 +#define VF610_PAD_PTC26__SRC_RCON24 0x18C 0x000 ALT3 0x0 +#define VF610_PAD_PTC26__FB_TA_B 0x18C 0x000 ALT4 0x0 +#define VF610_PAD_PTC26__NF_RB_B 0x18C 0x000 ALT5 0x0 +#define VF610_PAD_PTC26__DCU1_B7 0x18C 0x000 ALT7 0x0 +#define VF610_PAD_PTC27__GPIO_100 0x190 0x000 ALT0 0x0 +#define VF610_PAD_PTC27__SAI1_RX_BCLK 0x190 0x000 ALT1 0x0 +#define VF610_PAD_PTC27__DSPI0_CS4 0x190 0x000 ALT2 0x0 +#define VF610_PAD_PTC27__SRC_RCON25 0x190 0x000 ALT3 0x0 +#define VF610_PAD_PTC27__FB_BE3_B 0x190 0x000 ALT4 0x0 +#define VF610_PAD_PTC27__FB_CS3_B 0x190 0x000 ALT5 0x0 +#define VF610_PAD_PTC27__NF_ALE 0x190 0x000 ALT6 0x0 +#define VF610_PAD_PTC27__DCU1_B2 0x190 0x000 ALT7 0x0 +#define VF610_PAD_PTC28__GPIO_101 0x194 0x000 ALT0 0x0 +#define VF610_PAD_PTC28__SAI1_RX_DATA 0x194 0x000 ALT1 0x0 +#define VF610_PAD_PTC28__DSPI0_CS3 0x194 0x000 ALT2 0x0 +#define VF610_PAD_PTC28__SRC_RCON26 0x194 0x000 ALT3 0x0 +#define VF610_PAD_PTC28__FB_BE2_B 0x194 0x000 ALT4 0x0 +#define VF610_PAD_PTC28__FB_CS2_B 0x194 0x000 ALT5 0x0 +#define VF610_PAD_PTC28__NF_CLE 0x194 0x000 ALT6 0x0 +#define VF610_PAD_PTC28__DCU1_B3 0x194 0x000 ALT7 0x0 +#define VF610_PAD_PTC29__GPIO_102 0x198 0x000 ALT0 0x0 +#define VF610_PAD_PTC29__SAI1_TX_DATA 0x198 0x000 ALT1 0x0 +#define VF610_PAD_PTC29__DSPI0_CS2 0x198 0x000 ALT2 0x0 +#define VF610_PAD_PTC29__SRC_RCON27 0x198 0x000 ALT3 0x0 +#define VF610_PAD_PTC29__FB_BE1_B 0x198 0x000 ALT4 0x0 +#define VF610_PAD_PTC29__FB_MUXED_TSIZE1 0x198 0x000 ALT5 0x0 +#define VF610_PAD_PTC29__DCU1_B4 0x198 0x000 ALT7 0x0 +#define VF610_PAD_PTC30__GPIO_103 0x19C 0x000 ALT0 0x0 +#define VF610_PAD_PTC30__SAI1_RX_SYNC 0x19C 0x000 ALT1 0x0 +#define VF610_PAD_PTC30__DSPI1_CS2 0x19C 0x000 ALT2 0x0 +#define VF610_PAD_PTC30__SRC_RCON28 0x19C 0x000 ALT3 0x0 +#define VF610_PAD_PTC30__FB_MUXED_BE0_B 0x19C 0x000 ALT4 0x0 +#define VF610_PAD_PTC30__FB_TSIZ0 0x19C 0x000 ALT5 0x0 +#define VF610_PAD_PTC30__ADC0_SE5 0x19C 0x000 ALT6 0x0 +#define VF610_PAD_PTC30__DCU1_B5 0x19C 0x000 ALT7 0x0 +#define VF610_PAD_PTC31__GPIO_104 0x1A0 0x000 ALT0 0x0 +#define VF610_PAD_PTC31__SAI1_TX_SYNC 0x1A0 0x360 ALT1 0x1 +#define VF610_PAD_PTC31__SRC_RCON29 0x1A0 0x000 ALT3 0x0 +#define VF610_PAD_PTC31__ADC1_SE5 0x1A0 0x000 ALT6 0x0 +#define VF610_PAD_PTC31__DCU1_B6 0x1A0 0x000 ALT7 0x0 +#define VF610_PAD_PTE0__GPIO_105 0x1A4 0x000 ALT0 0x0 +#define VF610_PAD_PTE0__DCU0_HSYNC 0x1A4 0x000 ALT1 0x0 +#define VF610_PAD_PTE0__SRC_BMODE1 0x1A4 0x000 ALT2 0x0 +#define VF610_PAD_PTE0__LCD0 0x1A4 0x000 ALT4 0x0 +#define VF610_PAD_PTE0__DEBUG_OUT29 0x1A4 0x000 ALT7 0x0 +#define VF610_PAD_PTE1__GPIO_106 0x1A8 0x000 ALT0 0x0 +#define VF610_PAD_PTE1__DCU0_VSYNC 0x1A8 0x000 ALT1 0x0 +#define VF610_PAD_PTE1__SRC_BMODE0 0x1A8 0x000 ALT2 0x0 +#define VF610_PAD_PTE1__LCD1 0x1A8 0x000 ALT4 0x0 +#define VF610_PAD_PTE1__DEBUG_OUT30 0x1A8 0x000 ALT7 0x0 +#define VF610_PAD_PTE2__GPIO_107 0x1AC 0x000 ALT0 0x0 +#define VF610_PAD_PTE2__DCU0_PCLK 0x1AC 0x000 ALT1 0x0 +#define VF610_PAD_PTE2__LCD2 0x1AC 0x000 ALT4 0x0 +#define VF610_PAD_PTE2__DEBUG_OUT31 0x1AC 0x000 ALT7 0x0 +#define VF610_PAD_PTE3__GPIO_108 0x1B0 0x000 ALT0 0x0 +#define VF610_PAD_PTE3__DCU0_TAG 0x1B0 0x000 ALT1 0x0 +#define VF610_PAD_PTE3__LCD3 0x1B0 0x000 ALT4 0x0 +#define VF610_PAD_PTE3__DEBUG_OUT32 0x1B0 0x000 ALT7 0x0 +#define VF610_PAD_PTE4__GPIO_109 0x1B4 0x000 ALT0 0x0 +#define VF610_PAD_PTE4__DCU0_DE 0x1B4 0x000 ALT1 0x0 +#define VF610_PAD_PTE4__LCD4 0x1B4 0x000 ALT4 0x0 +#define VF610_PAD_PTE4__DEBUG_OUT33 0x1B4 0x000 ALT7 0x0 +#define VF610_PAD_PTE5__GPIO_110 0x1B8 0x000 ALT0 0x0 +#define VF610_PAD_PTE5__DCU0_R0 0x1B8 0x000 ALT1 0x0 +#define VF610_PAD_PTE5__LCD5 0x1B8 0x000 ALT4 0x0 +#define VF610_PAD_PTE5__DEBUG_OUT34 0x1B8 0x000 ALT7 0x0 +#define VF610_PAD_PTE6__GPIO_111 0x1BC 0x000 ALT0 0x0 +#define VF610_PAD_PTE6__DCU0_R1 0x1BC 0x000 ALT1 0x0 +#define VF610_PAD_PTE6__LCD6 0x1BC 0x000 ALT4 0x0 +#define VF610_PAD_PTE6__DEBUG_OUT35 0x1BC 0x000 ALT7 0x0 +#define VF610_PAD_PTE7__GPIO_112 0x1C0 0x000 ALT0 0x0 +#define VF610_PAD_PTE7__DCU0_R2 0x1C0 0x000 ALT1 0x0 +#define VF610_PAD_PTE7__SRC_RCON0 0x1C0 0x000 ALT3 0x0 +#define VF610_PAD_PTE7__LCD7 0x1C0 0x000 ALT4 0x0 +#define VF610_PAD_PTE7__DEBUG_OUT36 0x1C0 0x000 ALT7 0x0 +#define VF610_PAD_PTE8__GPIO_113 0x1C4 0x000 ALT0 0x0 +#define VF610_PAD_PTE8__DCU0_R3 0x1C4 0x000 ALT1 0x0 +#define VF610_PAD_PTE8__SRC_RCON1 0x1C4 0x000 ALT3 0x0 +#define VF610_PAD_PTE8__LCD8 0x1C4 0x000 ALT4 0x0 +#define VF610_PAD_PTE8__DEBUG_OUT37 0x1C4 0x000 ALT7 0x0 +#define VF610_PAD_PTE9__GPIO_114 0x1C8 0x000 ALT0 0x0 +#define VF610_PAD_PTE9__DCU0_R4 0x1C8 0x000 ALT1 0x0 +#define VF610_PAD_PTE9__SRC_RCON2 0x1C8 0x000 ALT3 0x0 +#define VF610_PAD_PTE9__LCD9 0x1C8 0x000 ALT4 0x0 +#define VF610_PAD_PTE9__DEBUG_OUT38 0x1C8 0x000 ALT7 0x0 +#define VF610_PAD_PTE10__GPIO_115 0x1CC 0x000 ALT0 0x0 +#define VF610_PAD_PTE10__DCU0_R5 0x1CC 0x000 ALT1 0x0 +#define VF610_PAD_PTE10__SRC_RCON3 0x1CC 0x000 ALT3 0x0 +#define VF610_PAD_PTE10__LCD10 0x1CC 0x000 ALT4 0x0 +#define VF610_PAD_PTE10__DEBUG_OUT39 0x1CC 0x000 ALT7 0x0 +#define VF610_PAD_PTE11__GPIO_116 0x1D0 0x000 ALT0 0x0 +#define VF610_PAD_PTE11__DCU0_R6 0x1D0 0x000 ALT1 0x0 +#define VF610_PAD_PTE11__SRC_RCON4 0x1D0 0x000 ALT3 0x0 +#define VF610_PAD_PTE11__LCD11 0x1D0 0x000 ALT4 0x0 +#define VF610_PAD_PTE11__DEBUG_OUT40 0x1D0 0x000 ALT7 0x0 +#define VF610_PAD_PTE12__GPIO_117 0x1D4 0x000 ALT0 0x0 +#define VF610_PAD_PTE12__DCU0_R7 0x1D4 0x000 ALT1 0x0 +#define VF610_PAD_PTE12__DSPI1_CS3 0x1D4 0x000 ALT2 0x0 +#define VF610_PAD_PTE12__SRC_RCON5 0x1D4 0x000 ALT3 0x0 +#define VF610_PAD_PTE12__LCD12 0x1D4 0x000 ALT4 0x0 +#define VF610_PAD_PTE12__LPT_ALT0 0x1D4 0x000 ALT7 0x0 +#define VF610_PAD_PTE13__GPIO_118 0x1D8 0x000 ALT0 0x0 +#define VF610_PAD_PTE13__DCU0_G0 0x1D8 0x000 ALT1 0x0 +#define VF610_PAD_PTE13__LCD13 0x1D8 0x000 ALT4 0x0 +#define VF610_PAD_PTE13__DEBUG_OUT41 0x1D8 0x000 ALT7 0x0 +#define VF610_PAD_PTE14__GPIO_119 0x1DC 0x000 ALT0 0x0 +#define VF610_PAD_PTE14__DCU0_G1 0x1DC 0x000 ALT1 0x0 +#define VF610_PAD_PTE14__LCD14 0x1DC 0x000 ALT4 0x0 +#define VF610_PAD_PTE14__DEBUG_OUT42 0x1DC 0x000 ALT7 0x0 +#define VF610_PAD_PTE15__GPIO_120 0x1E0 0x000 ALT0 0x0 +#define VF610_PAD_PTE15__DCU0_G2 0x1E0 0x000 ALT1 0x0 +#define VF610_PAD_PTE15__SRC_RCON6 0x1E0 0x000 ALT3 0x0 +#define VF610_PAD_PTE15__LCD15 0x1E0 0x000 ALT4 0x0 +#define VF610_PAD_PTE15__DEBUG_OUT43 0x1E0 0x000 ALT7 0x0 +#define VF610_PAD_PTE16__GPIO_121 0x1E4 0x000 ALT0 0x0 +#define VF610_PAD_PTE16__DCU0_G3 0x1E4 0x000 ALT1 0x0 +#define VF610_PAD_PTE16__SRC_RCON7 0x1E4 0x000 ALT3 0x0 +#define VF610_PAD_PTE16__LCD16 0x1E4 0x000 ALT4 0x0 +#define VF610_PAD_PTE17__GPIO_122 0x1E8 0x000 ALT0 0x0 +#define VF610_PAD_PTE17__DCU0_G4 0x1E8 0x000 ALT1 0x0 +#define VF610_PAD_PTE17__SRC_RCON8 0x1E8 0x000 ALT3 0x0 +#define VF610_PAD_PTE17__LCD17 0x1E8 0x000 ALT4 0x0 +#define VF610_PAD_PTE18__GPIO_123 0x1EC 0x000 ALT0 0x0 +#define VF610_PAD_PTE18__DCU0_G5 0x1EC 0x000 ALT1 0x0 +#define VF610_PAD_PTE18__SRC_RCON9 0x1EC 0x000 ALT3 0x0 +#define VF610_PAD_PTE18__LCD18 0x1EC 0x000 ALT4 0x0 +#define VF610_PAD_PTE19__GPIO_124 0x1F0 0x000 ALT0 0x0 +#define VF610_PAD_PTE19__DCU0_G6 0x1F0 0x000 ALT1 0x0 +#define VF610_PAD_PTE19__SRC_RCON10 0x1F0 0x000 ALT3 0x0 +#define VF610_PAD_PTE19__LCD19 0x1F0 0x000 ALT4 0x0 +#define VF610_PAD_PTE19__I2C0_SCL 0x1F0 0x33C ALT5 0x3 +#define VF610_PAD_PTE20__GPIO_125 0x1F4 0x000 ALT0 0x0 +#define VF610_PAD_PTE20__DCU0_G7 0x1F4 0x000 ALT1 0x0 +#define VF610_PAD_PTE20__SRC_RCON11 0x1F4 0x000 ALT3 0x0 +#define VF610_PAD_PTE20__LCD20 0x1F4 0x000 ALT4 0x0 +#define VF610_PAD_PTE20__I2C0_SDA 0x1F4 0x340 ALT5 0x3 +#define VF610_PAD_PTE20__EWM_IN 0x1F4 0x000 ALT7 0x0 +#define VF610_PAD_PTE21__GPIO_126 0x1F8 0x000 ALT0 0x0 +#define VF610_PAD_PTE21__DCU0_B0 0x1F8 0x000 ALT1 0x0 +#define VF610_PAD_PTE21__LCD21 0x1F8 0x000 ALT4 0x0 +#define VF610_PAD_PTE22__GPIO_127 0x1FC 0x000 ALT0 0x0 +#define VF610_PAD_PTE22__DCU0_B1 0x1FC 0x000 ALT1 0x0 +#define VF610_PAD_PTE22__LCD22 0x1FC 0x000 ALT4 0x0 +#define VF610_PAD_PTE23__GPIO_128 0x200 0x000 ALT0 0x0 +#define VF610_PAD_PTE23__DCU0_B2 0x200 0x000 ALT1 0x0 +#define VF610_PAD_PTE23__SRC_RCON12 0x200 0x000 ALT3 0x0 +#define VF610_PAD_PTE23__LCD23 0x200 0x000 ALT4 0x0 +#define VF610_PAD_PTE24__GPIO_129 0x204 0x000 ALT0 0x0 +#define VF610_PAD_PTE24__DCU0_B3 0x204 0x000 ALT1 0x0 +#define VF610_PAD_PTE24__SRC_RCON13 0x204 0x000 ALT3 0x0 +#define VF610_PAD_PTE24__LCD24 0x204 0x000 ALT4 0x0 +#define VF610_PAD_PTE25__GPIO_130 0x208 0x000 ALT0 0x0 +#define VF610_PAD_PTE25__DCU0_B4 0x208 0x000 ALT1 0x0 +#define VF610_PAD_PTE25__SRC_RCON14 0x208 0x000 ALT3 0x0 +#define VF610_PAD_PTE25__LCD25 0x208 0x000 ALT4 0x0 +#define VF610_PAD_PTE26__GPIO_131 0x20C 0x000 ALT0 0x0 +#define VF610_PAD_PTE26__DCU0_B5 0x20C 0x000 ALT1 0x0 +#define VF610_PAD_PTE26__SRC_RCON15 0x20C 0x000 ALT3 0x0 +#define VF610_PAD_PTE26__LCD26 0x20C 0x000 ALT4 0x0 +#define VF610_PAD_PTE27__GPIO_132 0x210 0x000 ALT0 0x0 +#define VF610_PAD_PTE27__DCU0_B6 0x210 0x000 ALT1 0x0 +#define VF610_PAD_PTE27__SRC_RCON16 0x210 0x000 ALT3 0x0 +#define VF610_PAD_PTE27__LCD27 0x210 0x000 ALT4 0x0 +#define VF610_PAD_PTE27__I2C1_SCL 0x210 0x344 ALT5 0x3 +#define VF610_PAD_PTE28__GPIO_133 0x214 0x000 ALT0 0x0 +#define VF610_PAD_PTE28__DCU0_B7 0x214 0x000 ALT1 0x0 +#define VF610_PAD_PTE28__SRC_RCON17 0x214 0x000 ALT3 0x0 +#define VF610_PAD_PTE28__LCD28 0x214 0x000 ALT4 0x0 +#define VF610_PAD_PTE28__I2C1_SDA 0x214 0x348 ALT5 0x3 +#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0 +#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0 +#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1 + +#endif diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts new file mode 100644 index 0000000..b3905f5 --- /dev/null +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "VF610 Tower Board"; + compatible = "fsl,vf610-twr", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP1,115200"; + }; + + memory { + reg = <0x80000000 0x8000000>; + }; + + clocks { + audio_ext { + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + enet_ext { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0_1>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1_1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi new file mode 100644 index 0000000..e1eb7da --- /dev/null +++ b/arch/arm/boot/dts/vf610.dtsi @@ -0,0 +1,464 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "skeleton.dtsi" +#include "vf610-pinfunc.h" +#include <dt-bindings/clock/vf610-clock.h> + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a5"; + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + sxosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + fxosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + aips0: aips-bus@40000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + reg = <0x40000000 0x70000>; + ranges; + + intc: interrupt-controller@40002000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x40003000 0x1000>, + <0x40002100 0x100>; + }; + + L2: l2-cache@40006000 { + compatible = "arm,pl310-cache"; + reg = <0x40006000 0x1000>; + cache-unified; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + }; + + uart0: serial@40027000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40027000 0x1000>; + interrupts = <0 61 0x00>; + clocks = <&clks VF610_CLK_UART0>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart1: serial@40028000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40028000 0x1000>; + interrupts = <0 62 0x04>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart2: serial@40029000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40029000 0x1000>; + interrupts = <0 63 0x04>; + clocks = <&clks VF610_CLK_UART2>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart3: serial@4002a000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x4002a000 0x1000>; + interrupts = <0 64 0x04>; + clocks = <&clks VF610_CLK_UART3>; + clock-names = "ipg"; + status = "disabled"; + }; + + sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + interrupts = <0 86 0x04>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + status = "disabled"; + }; + + pit: pit@40037000 { + compatible = "fsl,vf610-pit"; + reg = <0x40037000 0x1000>; + interrupts = <0 39 0x04>; + clocks = <&clks VF610_CLK_PIT>; + clock-names = "pit"; + }; + + wdog@4003e000 { + compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; + reg = <0x4003e000 0x1000>; + clocks = <&clks VF610_CLK_WDT>; + clock-names = "wdog"; + }; + + qspi0: quadspi@40044000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-qspi"; + reg = <0x40044000 0x1000>; + interrupts = <0 24 0x04>; + clocks = <&clks VF610_CLK_QSPI0_EN>, + <&clks VF610_CLK_QSPI0>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + iomuxc: iomuxc@40048000 { + compatible = "fsl,vf610-iomuxc"; + reg = <0x40048000 0x1000>; + #gpio-range-cells = <3>; + + /* functions and groups pins */ + + dcu0 { + pinctrl_dcu0_1: dcu0grp_1 { + fsl,pins = < + VF610_PAD_PTB8__GPIO_30 0x42 + VF610_PAD_PTE0__DCU0_HSYNC 0x42 + VF610_PAD_PTE1__DCU0_VSYNC 0x42 + VF610_PAD_PTE2__DCU0_PCLK 0x42 + VF610_PAD_PTE4__DCU0_DE 0x42 + VF610_PAD_PTE5__DCU0_R0 0x42 + VF610_PAD_PTE6__DCU0_R1 0x42 + VF610_PAD_PTE7__DCU0_R2 0x42 + VF610_PAD_PTE8__DCU0_R3 0x42 + VF610_PAD_PTE9__DCU0_R4 0x42 + VF610_PAD_PTE10__DCU0_R5 0x42 + VF610_PAD_PTE11__DCU0_R6 0x42 + VF610_PAD_PTE12__DCU0_R7 0x42 + VF610_PAD_PTE13__DCU0_G0 0x42 + VF610_PAD_PTE14__DCU0_G1 0x42 + VF610_PAD_PTE15__DCU0_G2 0x42 + VF610_PAD_PTE16__DCU0_G3 0x42 + VF610_PAD_PTE17__DCU0_G4 0x42 + VF610_PAD_PTE18__DCU0_G5 0x42 + VF610_PAD_PTE19__DCU0_G6 0x42 + VF610_PAD_PTE20__DCU0_G7 0x42 + VF610_PAD_PTE21__DCU0_B0 0x42 + VF610_PAD_PTE22__DCU0_B1 0x42 + VF610_PAD_PTE23__DCU0_B2 0x42 + VF610_PAD_PTE24__DCU0_B3 0x42 + VF610_PAD_PTE25__DCU0_B4 0x42 + VF610_PAD_PTE26__DCU0_B5 0x42 + VF610_PAD_PTE27__DCU0_B6 0x42 + VF610_PAD_PTE28__DCU0_B7 0x42 + >; + }; + }; + + dspi0 { + pinctrl_dspi0_1: dspi0grp_1 { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp_1 { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + }; + + fec0 { + pinctrl_fec0_1: fec0grp_1 { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + }; + + fec1 { + pinctrl_fec1_1: fec1grp_1 { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + }; + + i2c0 { + pinctrl_i2c0_1: i2c0grp_1 { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x30d3 + VF610_PAD_PTB15__I2C0_SDA 0x30d3 + >; + }; + }; + + pwm0 { + pinctrl_pwm0_1: pwm0grp_1 { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + VF610_PAD_PTB6__FTM0_CH6 0x1582 + VF610_PAD_PTB7__FTM0_CH7 0x1582 + >; + }; + }; + + qspi0 { + pinctrl_qspi0_1: qspi0grp_1 { + fsl,pins = < + VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b + VF610_PAD_PTD1__QSPI0_A_CS0 0x307f + VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073 + VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073 + VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073 + VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b + VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b + VF610_PAD_PTD8__QSPI0_B_CS0 0x307f + VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b + >; + }; + }; + + sai2 { + pinctrl_sai2_1: sai2grp_1 { + fsl,pins = < + VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed + VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee + VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed + VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed + VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed + VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed + VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp_1 { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + }; + + usbvbus { + pinctrl_usbvbus_1: usbvbusgrp_1 { + fsl,pins = < + VF610_PAD_PTA24__USB1_VBUS_EN 0x219c + VF610_PAD_PTA16__USB0_VBUS_EN 0x219c + >; + }; + }; + + }; + + gpio1: gpio@40049000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40049000 0x1000 0x400ff000 0x40>; + interrupts = <0 107 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + + gpio2: gpio@4004a000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004a000 0x1000 0x400ff040 0x40>; + interrupts = <0 108 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@4004b000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004b000 0x1000 0x400ff080 0x40>; + interrupts = <0 109 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@4004c000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; + interrupts = <0 110 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio5: gpio@4004d000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004d000 0x1000 0x400ff100 0x40>; + interrupts = <0 111 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 128 7>; + }; + + anatop@40050000 { + compatible = "fsl,vf610-anatop"; + reg = <0x40050000 0x1000>; + }; + + i2c0: i2c@40066000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + interrupts =<0 71 0x04>; + clocks = <&clks VF610_CLK_I2C0>; + clock-names = "ipg"; + status = "disabled"; + }; + + clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + #clock-cells = <1>; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40080000 0x80000>; + ranges; + + uart4: serial@400a9000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400a9000 0x1000>; + interrupts = <0 65 0x04>; + clocks = <&clks VF610_CLK_UART4>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart5: serial@400aa000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400aa000 0x1000>; + interrupts = <0 66 0x04>; + clocks = <&clks VF610_CLK_UART5>; + clock-names = "ipg"; + status = "disabled"; + }; + + fec0: ethernet@400d0000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d0000 0x1000>; + interrupts = <0 78 0x04>; + clocks = <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + fec1: ethernet@400d1000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d1000 0x1000>; + interrupts = <0 79 0x04>; + clocks = <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 877b33a..87f3331 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -30,3 +30,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index 4a4b96f..51d0e91 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -11,6 +11,23 @@ / { compatible = "via,vt8500"; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -111,32 +128,36 @@ reg = <0xd8050400 0x100>; }; - uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; - uart@d8210000 { + uart2: serial@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; clocks = <&clkuart2>; + status = "disabled"; }; - uart@d82c0000 { + uart3: serial@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; clocks = <&clkuart3>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index edd2cec..e3e6b9e 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -30,3 +30,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b2bf359..a1a854b 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -12,11 +12,24 @@ compatible = "wm,wm8505"; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; }; }; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -68,6 +81,13 @@ clock-frequency = <25000000>; }; + plla: plla { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + pllb: pllb { #clock-cells = <0>; compatible = "via,vt8500-pll-clock"; @@ -75,6 +95,48 @@ reg = <0x204>; }; + pllc: pllc { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x20c>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x350>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -163,46 +225,52 @@ reg = <0xd8050400 0x100>; }; - uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; - uart@d8210000 { + uart2: serial@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; clocks = <&clkuart2>; + status = "disabled"; }; - uart@d82c0000 { + uart3: serial@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; clocks = <&clkuart3>; + status = "disabled"; }; - uart@d8370000 { + uart4: serial@d8370000 { compatible = "via,vt8500-uart"; reg = <0xd8370000 0x1040>; interrupts = <31>; clocks = <&clkuart4>; + status = "disabled"; }; - uart@d8380000 { + uart5: serial@d8380000 { compatible = "via,vt8500-uart"; reg = <0xd8380000 0x1040>; interrupts = <30>; clocks = <&clkuart5>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index 61671a0..dd0d1b6 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -32,3 +32,6 @@ }; }; +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index dd8464e..7525982 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -11,6 +11,21 @@ / { compatible = "wm,wm8650"; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -77,6 +92,55 @@ reg = <0x204>; }; + pllc: pllc { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x20c>; + }; + + plle: plle { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x210>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x320>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -93,14 +157,7 @@ enable-bit = <2>; }; - arm: arm { - #clock-cells = <0>; - compatible = "via,vt8500-device-clock"; - clocks = <&plla>; - divisor-reg = <0x300>; - }; - - sdhc: sdhc { + clksdhc: sdhc { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; clocks = <&pllb>; @@ -140,18 +197,20 @@ reg = <0xd8050400 0x100>; }; - uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts new file mode 100644 index 0000000..37e4a40 --- /dev/null +++ b/arch/arm/boot/dts/wm8750-apc8750.dts @@ -0,0 +1,30 @@ +/* + * wm8750-apc8750.dts + * - Device tree file for VIA APC8750 + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8750.dtsi" + +/ { + model = "VIA APC8750"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&i2c>; + + i2c: i2c { + wm,pins = <168 169 170 171>; + wm,function = <2>; /* alt */ + wm,pull = <2>; /* pull-up */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi new file mode 100644 index 0000000..557a9c2a --- /dev/null +++ b/arch/arm/boot/dts/wm8750.dtsi @@ -0,0 +1,347 @@ +/* + * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8750"; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm1176ej-s"; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8750-pinctrl"; + reg = <0xd8110000 0x10000>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + + pllc: pllc { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x20C>; + }; + + plle: plle { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x210>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x320>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + + clkuart0: uart0 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <24>; + }; + + clkuart1: uart1 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <25>; + }; + + clkuart2: uart2 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <26>; + }; + + clkuart3: uart3 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <27>; + }; + + clkuart4: uart4 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <28>; + }; + + clkuart5: uart5 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <29>; + }; + + clkpwm: pwm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x350>; + enable-reg = <0x250>; + enable-bit = <17>; + }; + + clksdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x330>; + divisor-mask = <0x3f>; + enable-reg = <0x250>; + enable-bit = <0>; + }; + + clki2c0: i2c0clk { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x3A0>; + enable-reg = <0x250>; + enable-bit = <8>; + }; + + clki2c1: i2c1clk { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x3A4>; + enable-reg = <0x250>; + enable-bit = <9>; + }; + }; + }; + + pwm: pwm@d8220000 { + #pwm-cells = <3>; + compatible = "via,vt8500-pwm"; + reg = <0xd8220000 0x100>; + clocks = <&clkpwm>; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <26>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <26>; + }; + + uhci@d8008d00 { + compatible = "platform-uhci"; + reg = <0xd8008d00 0x200>; + interrupts = <26>; + }; + + uart0: serial@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&clkuart0>; + status = "disabled"; + }; + + uart1: serial@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&clkuart1>; + status = "disabled"; + }; + + uart2: serial@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&clkuart2>; + status = "disabled"; + }; + + uart3: serial@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&clkuart3>; + status = "disabled"; + }; + + uart4: serial@d8370000 { + compatible = "via,vt8500-uart"; + reg = <0xd8370000 0x1040>; + interrupts = <30>; + clocks = <&clkuart4>; + status = "disabled"; + }; + + uart5: serial@d8380000 { + compatible = "via,vt8500-uart"; + reg = <0xd8380000 0x1040>; + interrupts = <43>; + clocks = <&clkuart5>; + status = "disabled"; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&clksdhc>; + bus-width = <4>; + sdon-inverted; + }; + + i2c_0: i2c@d8280000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8280000 0x1000>; + interrupts = <19>; + clocks = <&clki2c0>; + clock-frequency = <400000>; + }; + + i2c_1: i2c@d8320000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8320000 0x1000>; + interrupts = <18>; + clocks = <&clki2c1>; + clock-frequency = <400000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index 32d2253..90e913f 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -41,3 +41,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index fc790d0..d98386d 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -11,6 +11,17 @@ / { compatible = "wm,wm8850"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + }; + }; + aliases { serial0 = &uart0; serial1 = &uart1; @@ -72,18 +83,81 @@ plla: plla { #clock-cells = <0>; - compatible = "wm,wm8750-pll-clock"; - clocks = <&ref25>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; reg = <0x200>; }; pllb: pllb { #clock-cells = <0>; - compatible = "wm,wm8750-pll-clock"; - clocks = <&ref25>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; reg = <0x204>; }; + pllc: pllc { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x20c>; + }; + + plle: plle { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x210>; + }; + + pllf: pllf { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x214>; + }; + + pllg: pllg { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x218>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x320>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -178,32 +252,36 @@ interrupts = <26>; }; - uart0: uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart1: uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; - uart2: uart@d8210000 { + uart2: serial@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; clocks = <&clkuart2>; + status = "disabled"; }; - uart3: uart@d82c0000 { + uart3: serial@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; clocks = <&clkuart3>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 0dbee2c..6f54a64 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -49,6 +49,7 @@ uart0: uart@e0000000 { compatible = "xlnx,xuartps"; + status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; clock-names = "ref_clk", "aper_clk"; reg = <0xE0000000 0x1000>; @@ -57,6 +58,7 @@ uart1: uart@e0001000 { compatible = "xlnx,xuartps"; + status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; clock-names = "ref_clk", "aper_clk"; reg = <0xE0001000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index e25a307..21aea99 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -24,7 +24,11 @@ }; chosen { - bootargs = "console=ttyPS1,115200 earlyprintk"; + bootargs = "console=ttyPS0,115200 earlyprintk"; }; }; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts new file mode 100644 index 0000000..79009e0 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * Copyright (C) 2013 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq ZC706 Development Board"; + compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + }; + +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts new file mode 100644 index 0000000..d6acf2b --- /dev/null +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * Copyright (C) 2013 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Zed Development Board"; + compatible = "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + }; + +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index a8800d3..75fd842 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -161,6 +161,7 @@ CONFIG_USB_ATMEL_USBA=y CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -169,6 +170,7 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index f50c404..69b6928 100644 --- a/arch/arm/configs/at91sam9260_9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -15,7 +15,6 @@ CONFIG_MACH_AT91SAM9260EK=y CONFIG_MACH_CAM60=y CONFIG_MACH_SAM9_L9260=y CONFIG_MACH_AFEB9260=y -CONFIG_MACH_USB_A9260=y CONFIG_MACH_QIL_A9260=y CONFIG_MACH_CPU9260=y CONFIG_MACH_FLEXIBITY=y diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 9d72ab6..e4002636 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -15,7 +15,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y -CONFIG_MACH_USB_A9263=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index b01e763..35f8cf2 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -81,6 +81,7 @@ CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set @@ -96,6 +97,11 @@ CONFIG_DEBUG_GPIO=y CONFIG_MMC=y CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 3a78bdc..ca900be 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -176,12 +176,6 @@ config MACH_AFEB9260 <svn://194.85.238.22/home/users/george/svn/arm9eb> <http://groups.google.com/group/arm9fpga-evolution-board> -config MACH_USB_A9260 - bool "CALAO USB-A9260" - help - Select this if you are using a Calao Systems USB-A9260. - <http://www.calao-systems.com> - config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" help @@ -257,13 +251,6 @@ config MACH_GSIA18S produced by GeoSIG Ltd company. This is an internet accelerograph. <http://www.geosig.com> -config MACH_USB_A9G20 - bool "CALAO USB-A9G20" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using a Calao Systems USB-A9G20. - <http://www.calao-systems.com> - config MACH_SNAPPER_9260 bool "Bluewater Systems Snapper 9260/9G20 module" help @@ -309,12 +296,6 @@ config MACH_AT91SAM9263EK Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 07e89b4..3b0a953 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o obj-$(CONFIG_MACH_CAM60) += board-cam60.o obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o @@ -64,7 +63,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o -obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o @@ -77,7 +75,6 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o -obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index fda5026..474ee04 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -266,6 +266,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e631fec..2abee66 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -249,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), }; /* diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c deleted file mode 100644 index 2487d94..0000000 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-usb-a926x.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2007 Calao-systems - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/spi/mmc_spi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "at91_shdwc.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.00 MHz crystal */ - at91_initialize(12000000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PB11, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -static void __init ek_add_device_udc(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_udc_data.vbus_pin = AT91_PIN_PC5; - - at91_add_device_udc(&ek_udc_data); -} - -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4 -static int at91_mmc_spi_init(struct device *dev, - irqreturn_t (*detect_int)(int, void *), void *data) -{ - /* Configure Interrupt pin as input, no pull-up */ - at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0); - return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "mmc-spi-detect", data); -} - -static void at91_mmc_spi_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data); -} - -static struct mmc_spi_platform_data at91_mmc_spi_pdata = { - .init = at91_mmc_spi_init, - .exit = at91_mmc_spi_exit, - .detect_delay = 100, /* msecs */ -}; -#endif - -/* - * SPI devices. - */ -static struct spi_board_info usb_a9263_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - } -}; - -static struct spi_board_info usb_a9g20_spi_devices[] = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) - { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 0, - .platform_data = &at91_mmc_spi_pdata, - .mode = SPI_MODE_3, - }, -#endif -}; - -static void __init ek_add_device_spi(void) -{ - if (machine_is_usb_a9263()) - at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices)); - else if (machine_is_usb_a9g20()) - at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices)); -} - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - -static void __init ek_add_device_eth(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_macb_data.phy_irq_pin = AT91_PIN_PA31; - - at91_add_device_eth(&ek_macb_data); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "barebox", - .offset = 0, - .size = 3 * SZ_128K, - }, { - .name = "bareboxenv", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "bareboxenv2", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "oftree", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 4 * SZ_1M, - }, { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, { - .name = "data", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA22, - .enable_pin = AT91_PIN_PD15, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) { - ek_nand_data.rdy_pin = AT91_PIN_PC13; - ek_nand_data.enable_pin = AT91_PIN_PC14; - } - - /* configure chip-select 3 (NAND) */ - if (machine_is_usb_a9g20()) - sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config); - else - sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* USER PUSH BUTTON */ - .code = KEY_ENTER, - .gpio = AT91_PIN_PB10, - .active_low = 1, - .desc = "user_pb", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */ - at91_set_deglitch(AT91_PIN_PB10, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* user_led (green) */ - .name = "user_led", - .gpio = AT91_PIN_PB21, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("rv3029c2", 0x56), - }, -}; - -static void __init ek_add_device_leds(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_leds[0].active_low = 0; - - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -static void __init ek_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - ek_add_device_udc(); - /* SPI */ - ek_add_device_spi(); - /* Ethernet */ - ek_add_device_eth(); - /* NAND */ - ek_add_device_nand(); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - ek_add_device_leds(); - - if (machine_is_usb_a9g20()) { - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - } else { - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* shutdown controller, wakeup button (5 msec low) */ - at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) - | AT91_SHDW_WKMODE0_LOW - | AT91_SHDW_RTTWKEN); - } -} - -MACHINE_START(USB_A9263, "CALAO USB_A9263") - /* Maintainer: calao-systems */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(USB_A9260, "CALAO USB_A9260") - /* Maintainer: calao-systems */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(USB_A9G20, "CALAO USB_A92G0") - /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 04b1bad..9afac26 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -327,8 +327,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); - clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL); - clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0"); clk_register_clkdev(clk[iim_gate], "iim", NULL); diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 74e7b94..98c5894 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -24,26 +24,10 @@ #include "hardware.h" #include "mx53.h" -static void __init imx53_qsb_init(void) -{ - struct clk *clk; - - clk = clk_get_sys(NULL, "ssi_ext1"); - if (IS_ERR(clk)) { - pr_err("failed to get clk ssi_ext1\n"); - return; - } - - clk_register_clkdev(clk, NULL, "0-000a"); -} - static void __init imx53_dt_init(void) { mxc_arch_reset_init_dt(); - if (of_machine_is_compatible("fsl,imx53-qsb")) - imx53_qsb_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 3a66635..616fe02 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -23,6 +23,7 @@ config ARCH_MXS select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select PINCTRL + select SOC_BUS select SOC_IMX23 select SOC_IMX28 select STMP_DEVICE diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index d67ecc1..7fa611c1b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -19,13 +19,13 @@ #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/irqchip.h> #include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> +#include <linux/sys_soc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -39,12 +39,28 @@ #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 +#define HW_DIGCTL_CHIPID 0x310 +#define HW_DIGCTL_CHIPID_MASK (0xffff << 16) +#define HW_DIGCTL_REV_MASK 0xff +#define HW_DIGCTL_CHIPID_MX23 (0x3780 << 16) +#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16) + +#define MXS_CHIP_REVISION_1_0 0x10 +#define MXS_CHIP_REVISION_1_1 0x11 +#define MXS_CHIP_REVISION_1_2 0x12 +#define MXS_CHIP_REVISION_1_3 0x13 +#define MXS_CHIP_REVISION_1_4 0x14 +#define MXS_CHIP_REV_UNKNOWN 0xff + #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) #define MXS_SET_ADDR 0x4 #define MXS_CLR_ADDR 0x8 #define MXS_TOG_ADDR 0xc +static u32 chipid; +static u32 socid; + static inline void __mxs_setl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_SET_ADDR); @@ -352,29 +368,123 @@ static void __init tx28_post_init(void) pinctrl_put(pctl); } -static void __init cfa10049_init(void) +static void __init crystalfontz_init(void) { update_fec_mac_prop(OUI_CRYSTALFONTZ); } -static void __init cfa10037_init(void) +static const char __init *mxs_get_soc_id(void) { - update_fec_mac_prop(OUI_CRYSTALFONTZ); + struct device_node *np; + void __iomem *digctl_base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); + digctl_base = of_iomap(np, 0); + WARN_ON(!digctl_base); + + chipid = readl(digctl_base + HW_DIGCTL_CHIPID); + socid = chipid & HW_DIGCTL_CHIPID_MASK; + + iounmap(digctl_base); + of_node_put(np); + + switch (socid) { + case HW_DIGCTL_CHIPID_MX23: + return "i.MX23"; + case HW_DIGCTL_CHIPID_MX28: + return "i.MX28"; + default: + return "Unknown"; + } +} + +static u32 __init mxs_get_cpu_rev(void) +{ + u32 rev = chipid & HW_DIGCTL_REV_MASK; + + switch (socid) { + case HW_DIGCTL_CHIPID_MX23: + switch (rev) { + case 0x0: + return MXS_CHIP_REVISION_1_0; + case 0x1: + return MXS_CHIP_REVISION_1_1; + case 0x2: + return MXS_CHIP_REVISION_1_2; + case 0x3: + return MXS_CHIP_REVISION_1_3; + case 0x4: + return MXS_CHIP_REVISION_1_4; + default: + return MXS_CHIP_REV_UNKNOWN; + } + case HW_DIGCTL_CHIPID_MX28: + switch (rev) { + case 0x0: + return MXS_CHIP_REVISION_1_1; + case 0x1: + return MXS_CHIP_REVISION_1_2; + default: + return MXS_CHIP_REV_UNKNOWN; + } + default: + return MXS_CHIP_REV_UNKNOWN; + } +} + +static const char __init *mxs_get_revision(void) +{ + u32 rev = mxs_get_cpu_rev(); + + if (rev != MXS_CHIP_REV_UNKNOWN) + return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf, + rev & 0xf); + else + return kasprintf(GFP_KERNEL, "%s", "Unknown"); } static void __init mxs_machine_init(void) { + struct device_node *root; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (ret) + return; + + soc_dev_attr->family = "Freescale MXS Family"; + soc_dev_attr->soc_id = mxs_get_soc_id(); + soc_dev_attr->revision = mxs_get_revision(); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); - else if (of_machine_is_compatible("crystalfontz,cfa10037")) - cfa10037_init(); - else if (of_machine_is_compatible("crystalfontz,cfa10049")) - cfa10049_init(); + else if (of_machine_is_compatible("crystalfontz,cfa10037") || + of_machine_is_compatible("crystalfontz,cfa10049") || + of_machine_is_compatible("crystalfontz,cfa10055") || + of_machine_is_compatible("crystalfontz,cfa10057")) + crystalfontz_init(); of_platform_populate(NULL, of_default_bus_match_table, - mxs_auxdata_lookup, NULL); + mxs_auxdata_lookup, parent); if (of_machine_is_compatible("karo,tx28")) tx28_post_init(); @@ -434,7 +544,6 @@ static const char *mxs_dt_compat[] __initdata = { }; DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") - .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, .init_time = mxs_timer_init, .init_machine = mxs_machine_init, diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 9b9d105..5981c3d 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,6 +6,7 @@ config ARCH_NOMADIK select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK + select CLKSRC_OF select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 46cce9b..2df209e 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,9 +26,7 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-nomadik.h> -#include <linux/platform_data/pinctrl-nomadik.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/clocksource.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/of_address.h> @@ -90,48 +88,6 @@ #define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ #define NOMADIK_UART1_VBASE 0xF01FB000 -static unsigned long out_low[] = { PIN_OUTPUT_LOW }; -static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; -static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; -static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; - -static struct pinctrl_map __initdata nhk8815_pinmap[] = { - PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), - PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), - /* Hog in MMC/SD card mux */ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), - /* MCCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), - /* MCCMD */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), - /* MCCMDDIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), - /* MCDAT3-0 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), - /* MCDAT0DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), - /* MCDAT31DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), - /* MCMSFBCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), - /* CD input GPIO */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), - /* CD bias drive */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), - /* I2C0 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup), - /* I2C1 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup), - /* I2C2 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup), -}; - /* This is needed for LL-debug/earlyprintk/debug-macro.S */ static struct map_desc cpu8815_io_desc[] __initdata = { { @@ -171,7 +127,7 @@ static void __init cpu8815_timer_init_of(void) /* We need this to be up now */ nomadik_clk_init(); - mtu = of_find_node_by_path("/mtu0"); + mtu = of_find_node_by_path("/mtu@101e2000"); if (!mtu) return; base = of_iomap(mtu, 0); @@ -187,7 +143,7 @@ static void __init cpu8815_timer_init_of(void) src_cr |= SRC_CR_INIT_VAL; writel(src_cr, base); - nmdk_timer_init(base, irq); + clocksource_of_init(); } static struct fsmc_nand_timings cpu8815_nand_timings = { @@ -279,28 +235,10 @@ device_initcall(cpu8815_mmcsd_init); /* These are mostly to get the right device names for the clock lookups */ static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE, - "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE, - "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE, - "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE, - "gpio.3", NULL), - OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0, - "pinctrl-stn8815", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, - "uart0", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, - "uart1", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE, - "rng", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE, - "rtc-pl031", NULL), OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, - "fsmc-nand", &cpu8815_nand_data), + NULL, &cpu8815_nand_data), OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, - "mmci", &mmcsd_plat_data), + NULL, &mmcsd_plat_data), { /* sentinel */ }, }; @@ -310,7 +248,6 @@ static void __init cpu8815_init_of(void) /* At full speed latency must be >=2, so 0x249 in low bits */ l2x0_of_init(0x00730249, 0xfe000fff); #endif - pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); of_platform_populate(NULL, of_default_bus_match_table, cpu8815_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 0346de5..ba6534d 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -431,15 +431,11 @@ DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null); * - Driver code is not yet migrated to use hwmod/runtime pm * - Modules outside kernel access (to disable them by default) * - * - debugss * - mmu (gfx domain) * - cefuse * - usbotg_fck (its additional clock and not really a modulemode) * - ieee5000 */ -DEFINE_CLK_GATE(debugss_ick, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0, - AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0, AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, @@ -890,6 +886,42 @@ DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm", NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); /* + * debugss optional clocks + */ +DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck, + 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL); + +DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck, + 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL); + +static const char *stm_pmd_clock_mux_ck_parents[] = { + "dbg_sysclk_ck", "dbg_clka_ck", +}; + +DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0, + AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT, + AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL); + +DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0, + AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + AM33XX_TRC_PMD_CLKSEL_SHIFT, + AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL); + +DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck", + &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + AM33XX_STM_PMD_CLKDIVSEL_SHIFT, + AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO, + NULL); + +DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck", + &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + AM33XX_TRC_PMD_CLKDIVSEL_SHIFT, + AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO, + NULL); + +/* * clkdev */ static struct omap_clk am33xx_clks[] = { @@ -926,7 +958,6 @@ static struct omap_clk am33xx_clks[] = { CLK("481cc000.d_can", NULL, &dcan0_fck), CLK(NULL, "dcan1_fck", &dcan1_fck), CLK("481d0000.d_can", NULL, &dcan1_fck), - CLK(NULL, "debugss_ick", &debugss_ick), CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk), CLK(NULL, "mcasp0_fck", &mcasp0_fck), CLK(NULL, "mcasp1_fck", &mcasp1_fck), @@ -969,6 +1000,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "clkout2_div_ck", &clkout2_div_ck), CLK(NULL, "timer_32k_ck", &clkdiv32k_ick), CLK(NULL, "timer_sys_ck", &sys_clkin_ck), + CLK(NULL, "dbg_sysclk_ck", &dbg_sysclk_ck), + CLK(NULL, "dbg_clka_ck", &dbg_clka_ck), + CLK(NULL, "stm_pmd_clock_mux_ck", &stm_pmd_clock_mux_ck), + CLK(NULL, "trace_pmd_clk_mux_ck", &trace_pmd_clk_mux_ck), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck), + CLK(NULL, "clkout2_ck", &clkout2_ck), CLK("48300200.ehrpwm", "tbclk", &ehrpwm0_tbclk), CLK("48302200.ehrpwm", "tbclk", &ehrpwm1_tbclk), CLK("48304200.ehrpwm", "tbclk", &ehrpwm2_tbclk), @@ -982,6 +1020,7 @@ static const char *enable_init_clks[] = { "l4hs_gclk", "l4fw_gclk", "l4ls_gclk", + "clkout2_ck", /* Required for external peripherals like, Audio codecs */ }; int __init am33xx_clk_init(void) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f8d1912..0adb2b8 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -492,6 +492,18 @@ config MACH_SMDK2416 help Say Y here if you are using an SMDK2416 +config MACH_S3C2416_DT + bool "Samsung S3C2416 machine using devicetree" + select CLKSRC_OF + select USE_OF + select PINCTRL + select PINCTRL_S3C24XX + help + Machine support for Samsung S3C2416 machines with device tree enabled. + Select this if a fdt blob is available for the S3C2416 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + endif # CPU_S3C2416 if CPU_S3C2440 diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 6f46ecf..6de730b 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o +obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c new file mode 100644 index 0000000..f50454a --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -0,0 +1,91 @@ +/* + * Samsung's S3C2416 flattened device tree enabled machine + * + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * based on mach-exynos/mach-exynos4-dt.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-serial.h> + +#include "common.h" + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the S3C2416 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, + "s3c2440-uart.0", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, + "s3c2440-uart.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, + "s3c2440-uart.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, + "s3c2440-uart.3", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, + "s3c-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, + "s3c-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, + "s3c2440-i2c.0", NULL), + {}, +}; + +static void __init s3c2416_dt_map_io(void) +{ + s3c24xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); +} + +static void __init s3c2416_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + s3c2416_auxdata_lookup, NULL); + + s3c_pm_init(); +} + +static char const *s3c2416_dt_compat[] __initdata = { + "samsung,s3c2416", + "samsung,s3c2450", + NULL +}; + +DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") + /* Maintainer: Heiko Stuebner <heiko@sntech.de> */ + .dt_compat = s3c2416_dt_compat, + .map_io = s3c2416_dt_map_io, + .init_irq = irqchip_init, + .init_machine = s3c2416_dt_machine_init, + .init_time = clocksource_of_init, + .restart = s3c2416_restart, +MACHINE_END diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 65e1547..db27e8e 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -105,6 +105,20 @@ config MACH_ARMADILLO800EVA select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF +config MACH_ARMADILLO800EVA_REFERENCE + bool "Armadillo-800 EVA board - Reference Device Tree Implementation" + depends on ARCH_R8A7740 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_WM8978 if SND_SIMPLE_CARD + select USE_OF + ---help--- + Use reference implementation of Aramdillo800 EVA board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_BOCKW bool "BOCK-W platform" depends on ARCH_R8A7778 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 76f1639..6165a51 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o +obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c new file mode 100644 index 0000000..03b85fe --- /dev/null +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -0,0 +1,213 @@ +/* + * armadillo 800 eva board support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/pinctrl/machine.h> +#include <mach/common.h> +#include <mach/r8a7740.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +/* + * CON1 Camera Module + * CON2 Extension Bus + * CON3 HDMI Output + * CON4 Composite Video Output + * CON5 H-UDI JTAG + * CON6 ARM JTAG + * CON7 SD1 + * CON8 SD2 + * CON9 RTC BackUp + * CON10 Monaural Mic Input + * CON11 Stereo Headphone Output + * CON12 Audio Line Output(L) + * CON13 Audio Line Output(R) + * CON14 AWL13 Module + * CON15 Extension + * CON16 LCD1 + * CON17 LCD2 + * CON19 Power Input + * CON20 USB1 + * CON21 USB2 + * CON22 Serial + * CON23 LAN + * CON24 USB3 + * LED1 Camera LED(Yellow) + * LED2 Power LED (Green) + * ED3-LED6 User LED(Yellow) + * LED7 LAN link LED(Green) + * LED8 LAN activity LED(Yellow) + */ + +/* + * DipSwitch + * + * SW1 + * + * -12345678-+---------------+---------------------------- + * 1 | boot | hermit + * 0 | boot | OS auto boot + * -12345678-+---------------+---------------------------- + * 00 | boot device | eMMC + * 10 | boot device | SDHI0 (CON7) + * 01 | boot device | - + * 11 | boot device | Extension Buss (CS0) + * -12345678-+---------------+---------------------------- + * 0 | Extension Bus | D8-D15 disable, eMMC enable + * 1 | Extension Bus | D8-D15 enable, eMMC disable + * -12345678-+---------------+---------------------------- + * 0 | SDHI1 | COM8 disable, COM14 enable + * 1 | SDHI1 | COM8 enable, COM14 disable + * -12345678-+---------------+---------------------------- + * 0 | USB0 | COM20 enable, COM24 disable + * 1 | USB0 | COM20 disable, COM24 enable + * -12345678-+---------------+---------------------------- + * 00 | JTAG | SH-X2 + * 10 | JTAG | ARM + * 01 | JTAG | - + * 11 | JTAG | Boundary Scan + *-----------+---------------+---------------------------- + */ + +/* + * FSI-WM8978 + * + * this command is required when playback. + * + * # amixer set "Headphone" 50 + * + * this command is required when capture. + * + * # amixer set "Input PGA" 15 + * # amixer set "Left Input Mixer MicP" on + * # amixer set "Left Input Mixer MicN" on + * # amixer set "Right Input Mixer MicN" on + * # amixer set "Right Input Mixer MicP" on + */ + +/* + * USB function + * + * When you use USB Function, + * set SW1.6 ON, and connect cable to CN24. + * + * USBF needs workaround on R8A7740 chip. + * These are a little bit complex. + * see + * usbhsf_power_ctrl() + */ + +static const struct pinctrl_map eva_pinctrl_map[] = { + /* SCIFA1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", + "scifa1_data", "scifa1"), +}; + +static void __init eva_clock_init(void) +{ + struct clk *system = clk_get(NULL, "system_clk"); + struct clk *xtal1 = clk_get(NULL, "extal1"); + struct clk *usb24s = clk_get(NULL, "usb24s"); + struct clk *fsibck = clk_get(NULL, "fsibck"); + + if (IS_ERR(system) || + IS_ERR(xtal1) || + IS_ERR(usb24s) || + IS_ERR(fsibck)) { + pr_err("armadillo800eva board clock init failed\n"); + goto clock_error; + } + + /* armadillo 800 eva extal1 is 24MHz */ + clk_set_rate(xtal1, 24000000); + + /* usb24s use extal1 (= system) clock (= 24MHz) */ + clk_set_parent(usb24s, system); + + /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ + clk_set_rate(fsibck, 12288000); + +clock_error: + if (!IS_ERR(system)) + clk_put(system); + if (!IS_ERR(xtal1)) + clk_put(xtal1); + if (!IS_ERR(usb24s)) + clk_put(usb24s); + if (!IS_ERR(fsibck)) + clk_put(fsibck); +} + +/* + * board init + */ +static void __init eva_init(void) +{ + + r8a7740_clock_init(MD_CK0 | MD_CK2); + eva_clock_init(); + + pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + r8a7740_pinmux_init(); + + r8a7740_meram_workaround(); + + /* + * Touchscreen + * TODO: Move reset GPIO over to .dts when we can reference it + */ + gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); +#endif + + r8a7740_add_standard_devices_dt(); + r8a7740_pm_init(); +} + +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(char mode, const char *cmd) +{ + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + +static const char *eva_boards_compat_dt[] __initdata = { + "renesas,armadillo800eva-reference", + NULL, +}; + +DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") + .map_io = r8a7740_map_io, + .init_early = r8a7740_init_delay, + .init_irq = r8a7740_init_irq_of, + .init_machine = eva_init, + .init_time = shmobile_timer_init, + .init_late = shmobile_init_late, + .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, +MACHINE_END diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index 9c9a66c..b34d19b 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -45,10 +45,13 @@ enum { }; extern void r8a7740_meram_workaround(void); +extern void r8a7740_init_delay(void); extern void r8a7740_init_irq(void); +extern void r8a7740_init_irq_of(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); extern void r8a7740_add_standard_devices(void); +extern void r8a7740_add_standard_devices_dt(void); extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); extern void r8a7740_pm_init(void); diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c index b741c84..8871f77 100644 --- a/arch/arm/mach-shmobile/intc-r8a7740.c +++ b/arch/arm/mach-shmobile/intc-r8a7740.c @@ -20,19 +20,15 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> -void __init r8a7740_init_irq(void) +static void __init r8a7740_init_irq_common(void) { - void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); - /* initialize the Generic Interrupt Controller PL390 r0p0 */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); - /* route signals to GIC */ iowrite32(0x0, pfc_inta_ctrl); @@ -54,3 +50,19 @@ void __init r8a7740_init_irq(void) iounmap(intc_msk_base); iounmap(pfc_inta_ctrl); } + +void __init r8a7740_init_irq_of(void) +{ + irqchip_init(); + r8a7740_init_irq_common(); +} + +void __init r8a7740_init_irq(void) +{ + void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); + + /* initialize the Generic Interrupt Controller PL390 r0p0 */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); + r8a7740_init_irq_common(); +} diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 3a6b6fe..00c5a70 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -517,11 +517,7 @@ static struct platform_device ipmmu_device = { .num_resources = ARRAY_SIZE(ipmmu_resources), }; -static struct platform_device *r8a7740_early_devices[] __initdata = { - &irqpin0_device, - &irqpin1_device, - &irqpin2_device, - &irqpin3_device, +static struct platform_device *r8a7740_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -532,6 +528,13 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &scif7_device, &scifb_device, &cmt10_device, +}; + +static struct platform_device *r8a7740_early_devices[] __initdata = { + &irqpin0_device, + &irqpin1_device, + &irqpin2_device, + &irqpin3_device, &tmu00_device, &tmu01_device, &tmu02_device, @@ -951,6 +954,8 @@ void __init r8a7740_add_standard_devices(void) /* add devices */ platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); + platform_add_devices(r8a7740_devices_dt, + ARRAY_SIZE(r8a7740_devices_dt)); platform_add_devices(r8a7740_late_devices, ARRAY_SIZE(r8a7740_late_devices)); @@ -972,6 +977,8 @@ void __init r8a7740_add_early_devices(void) { early_platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); + early_platform_add_devices(r8a7740_devices_dt, + ARRAY_SIZE(r8a7740_devices_dt)); /* setup early console here as well */ shmobile_setup_console(); @@ -979,33 +986,29 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init r8a7740_add_early_devices_dt(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ - - early_platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { { } }; void __init r8a7740_add_standard_devices_dt(void) { - /* clocks are setup late during boot in the case of DT */ - r8a7740_clock_init(0); - - platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - + platform_add_devices(r8a7740_devices_dt, + ARRAY_SIZE(r8a7740_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, r8a7740_auxdata_lookup, NULL); } +void __init r8a7740_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +}; + +static void __init r8a7740_generic_init(void) +{ + r8a7740_clock_init(0); + r8a7740_add_standard_devices_dt(); +} + static const char *r8a7740_boards_compat_dt[] __initdata = { "renesas,r8a7740", NULL, @@ -1013,9 +1016,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, - .init_early = r8a7740_add_early_devices_dt, - .init_irq = r8a7740_init_irq, - .init_machine = r8a7740_add_standard_devices_dt, + .init_early = r8a7740_init_delay, + .init_irq = r8a7740_init_irq_of, + .init_machine = r8a7740_generic_init, + .init_time = shmobile_timer_init, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 46cca52..7669a49 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -274,11 +274,16 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), + OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), + OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), + OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", + NULL), /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, + OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), /* Requires clock name and DMA bindings. */ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, @@ -292,6 +297,16 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { {}, }; +static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { + /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), + {}, +}; + static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, @@ -318,8 +333,13 @@ static void __init u8500_init_machine(void) /* TODO: Export SoC, USB, cpu-freq and DMA40 */ parent = u8500_of_init_devices(); - /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); + /* automatically probe child nodes of dbx5x0 devices */ + if (of_machine_is_compatible("st-ericsson,u8540")) + of_platform_populate(NULL, u8500_local_bus_nodes, + u8540_auxdata_lookup, parent); + else + of_platform_populate(NULL, u8500_local_bus_nodes, + u8500_auxdata_lookup, parent); } static const char * stericsson_dt_platform_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 4c0199b8..4130e65 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -97,7 +97,6 @@ static void zynq_system_reset(char mode, const char *cmd) } static const char * const zynq_dt_match[] = { - "xlnx,zynq-zc702", "xlnx,zynq-7000", NULL }; |