blackfin architecture

This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix!  Tinyboards.

The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc.  (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000.  Since then ADI has put this core into its Blackfin
processor family of devices.  The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set.  It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.

The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf

The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc

This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/

We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel

[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 204 insertions, 0 deletions

diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
new file mode 100644
index 0000000..2cbb15b
--- /dev/null
+++ b/arch/blackfin/mach-common/lock.S
@@ -0,0 +1,204 @@
+/*
+ * File:         arch/blackfin/mach-common/lock.S
+ * Based on:
+ * Author:       LG Soft India
+ *
+ * Created:      ?
+ * Description:  kernel locks
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+.text
+
+#ifdef CONFIG_BLKFIN_CACHE_LOCK
+
+/* When you come here, it is assumed that
+ * R0 - Which way to be locked
+ */
+
+ENTRY(_cache_grab_lock)
+
+	[--SP]=( R7:0,P5:0 );
+
+	P1.H = (IMEM_CONTROL >> 16);
+	P1.L = (IMEM_CONTROL & 0xFFFF);
+	P5.H = (ICPLB_ADDR0 >> 16);
+	P5.L = (ICPLB_ADDR0 & 0xFFFF);
+	P4.H = (ICPLB_DATA0 >> 16);
+	P4.L = (ICPLB_DATA0 & 0xFFFF);
+	R7 = R0;
+
+	/* If the code of interest already resides in the cache
+	 * invalidate the entire cache itself.
+	 * invalidate_entire_icache;
+	 */
+
+	SP += -12;
+	[--SP] = RETS;
+	CALL _invalidate_entire_icache;
+	RETS = [SP++];
+	SP += 12;
+
+	/* Disable the Interrupts*/
+
+	CLI R3;
+
+.LLOCK_WAY:
+
+	/* Way0 - 0xFFA133E0
+	 * Way1 - 0xFFA137E0
+	 * Way2 - 0xFFA13BE0	Total Way Size = 4K
+	 * Way3 - 0xFFA13FE0
+	 */
+
+	/* Procedure Ex. -Set the locks for other ways by setting ILOC[3:1]
+	 * Only Way0 of the instruction cache can now be
+	 * replaced by a new code
+	 */
+
+	R5 = R7;
+	CC = BITTST(R7,0);
+	IF CC JUMP .LCLEAR1;
+	R7 = 0;
+	BITSET(R7,0);
+	JUMP .LDONE1;
+
+.LCLEAR1:
+	R7 = 0;
+	BITCLR(R7,0);
+.LDONE1:	R4 = R7 << 3;
+	R7 = [P1];
+	R7 = R7 | R4;
+	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
+	.align 8;
+	[P1] = R7;
+	SSYNC;
+
+	R7 = R5;
+	CC = BITTST(R7,1);
+	IF CC JUMP .LCLEAR2;
+	R7 = 0;
+	BITSET(R7,1);
+	JUMP .LDONE2;
+
+.LCLEAR2:
+	R7 = 0;
+	BITCLR(R7,1);
+.LDONE2:	R4 = R7 << 3;
+	R7 = [P1];
+	R7 = R7 | R4;
+	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
+	.align 8;
+	[P1] = R7;
+	SSYNC;
+
+	R7 = R5;
+	CC = BITTST(R7,2);
+	IF CC JUMP .LCLEAR3;
+	R7 = 0;
+	BITSET(R7,2);
+	JUMP .LDONE3;
+.LCLEAR3:
+	R7 = 0;
+	BITCLR(R7,2);
+.LDONE3:	R4 = R7 << 3;
+	R7 = [P1];
+	R7 = R7 | R4;
+	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
+	.align 8;
+	[P1] = R7;
+	SSYNC;
+
+
+	R7 = R5;
+	CC = BITTST(R7,3);
+	IF CC JUMP .LCLEAR4;
+	R7 = 0;
+	BITSET(R7,3);
+	JUMP .LDONE4;
+.LCLEAR4:
+	R7 = 0;
+	BITCLR(R7,3);
+.LDONE4:	R4 = R7 << 3;
+	R7 = [P1];
+	R7 = R7 | R4;
+	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
+	.align 8;
+	[P1] = R7;
+	SSYNC;
+
+	STI R3;
+
+	( R7:0,P5:0 ) = [SP++];
+
+	RTS;
+
+/* After the execution of critical code, the code is now locked into
+ * the cache way. Now we need to set ILOC.
+ *
+ * R0 - Which way to be locked
+ */
+
+ENTRY(_cache_lock)
+
+	[--SP]=( R7:0,P5:0 );
+
+	P1.H = (IMEM_CONTROL >> 16);
+	P1.L = (IMEM_CONTROL & 0xFFFF);
+
+	/* Disable the Interrupts*/
+	CLI R3;
+
+	R7 = [P1];
+	R2 = 0xFFFFFF87 (X);
+	R7 = R7 & R2;
+	R0 = R0 << 3;
+	R7 = R0 | R7;
+	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
+	.align 8;
+	[P1] = R7;
+	SSYNC;
+	/* Renable the Interrupts */
+	STI R3;
+
+	( R7:0,P5:0 ) = [SP++];
+	RTS;
+
+#endif	/* BLKFIN_CACHE_LOCK */
+
+/* Return the ILOC bits of IMEM_CONTROL
+ */
+
+ENTRY(_read_iloc)
+
+	P1.H = (IMEM_CONTROL >> 16);
+	P1.L = (IMEM_CONTROL & 0xFFFF);
+	R1 = 0xF;
+	R0 = [P1];
+	R0 = R0 >> 3;
+	R0 = R0 & R1;
+
+	RTS;