Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
 "The bulk of the changes here are to clean up the ColdFire 5441x SoC
  support so that it can run with MMU enabled. We have only supported it
  with MMU disabled up to now.

  There is also a few individual bug fixes across the ColdFire support
  code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: let clk_disable() return immediately if clk is NULL
  m68knommu: convert printk(KERN_INFO) to pr_info()
  m68knommu: clean up uClinux boot log output
  m68k: generalize uboot command line support
  m68k: don't panic if no hardware FPU defined
  m68k: only generate FPU instructions if CONFIG_FPU enabled
  m68k: always make available dump_fpu()
  m68k: generalize io memory region setup for ColdFire ACR registers
  m68k: move ColdFire _bootmem_alloc code
  m68k: report correct FPU type on ColdFire MMU platforms
  m68k: set appropriate machine type for m5411x SoC platforms
  m68k: move CONFIG_FPU set to per-CPU configuration
  m68knommu: fix IO write size in nettel pin set
  m68knommu: switch to using IO access methods in WildFire board code
  m68knommu: fix early setup to not access variables

5 files changed, 15 insertions, 53 deletions

diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index fddfdcc..1e3c7e9 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);
diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S
index 73d92ea..bdb472c 100644
--- a/arch/m68k/coldfire/head.S
+++ b/arch/m68k/coldfire/head.S
@@ -280,10 +280,10 @@ _clear_bss:
 	movel	%d0,m68k_cputype		/* Mark us as a ColdFire */
 	movel	#MMU_COLDFIRE,%d0
 	movel	%d0,m68k_mmutype
-	movel	#FPU_COLDFIRE,%d0
-	movel	%d0,m68k_fputype
-	movel	#MACH_M54XX,%d0
-	movel	%d0,m68k_machtype		/* Mark us as a 54xx machine */
+	movel	#FPUTYPE,%d0
+	movel	%d0,m68k_fputype		/* Mark FPU type */
+	movel	#MACHINE,%d0
+	movel	%d0,m68k_machtype		/* Mark machine type */
 	lea	init_task,%a2			/* Set "current" init task */
 #endif
 
diff --git a/arch/m68k/coldfire/m528x.c b/arch/m68k/coldfire/m528x.c
index 45e947a..12f9e37 100644
--- a/arch/m68k/coldfire/m528x.c
+++ b/arch/m68k/coldfire/m528x.c
@@ -102,14 +102,14 @@ void wildfiremod_halt(void)
 	printk(KERN_INFO "WildFireMod hibernating...\n");
 
 	/* Set portE.5 to Digital IO */
-	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+	writew(readw(MCFGPIO_PEPAR) & ~(1 << (5 * 2)), MCFGPIO_PEPAR);
 
 	/* Make portE.5 an output */
-	MCF5282_GPIO_DDRE |= (1 << 5);
+	writeb(readb(MCFGPIO_PDDR_E) | (1 << 5), MCFGPIO_PDDR_E);
 
 	/* Now toggle portE.5 from low to high */
-	MCF5282_GPIO_PORTE &= ~(1 << 5);
-	MCF5282_GPIO_PORTE |= (1 << 5);
+	writeb(readb(MCFGPIO_PODR_E) & ~(1 << 5), MCFGPIO_PODR_E);
+	writeb(readb(MCFGPIO_PODR_E) | (1 << 5), MCFGPIO_PODR_E);
 
 	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
 }
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
index 80879a7..2502f63 100644
--- a/arch/m68k/coldfire/m53xx.c
+++ b/arch/m68k/coldfire/m53xx.c
@@ -271,9 +271,6 @@ void __init config_BSP(char *commandp, int size)
 
 #define NAND_FLASH_ADDRESS	(0xD0000000)
 
-int sys_clk_khz = 0;
-int sys_clk_mhz = 0;
-
 void wtm_init(void);
 void scm_init(void);
 void gpio_init(void);
@@ -286,9 +283,8 @@ int  get_sys_clock (void);
 
 asmlinkage void __init sysinit(void)
 {
-	sys_clk_khz = clock_pll(0, 0);
-	sys_clk_mhz = sys_clk_khz/1000;
-	
+	clock_pll(0, 0);
+
 	wtm_init();
 	scm_init();
 	gpio_init();
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
index c32f767..386df3b 100644
--- a/arch/m68k/coldfire/m54xx.c
+++ b/arch/m68k/coldfire/m54xx.c
@@ -25,7 +25,6 @@
 #include <asm/m54xxgpt.h>
 #ifdef CONFIG_MMU
 #include <asm/mmu_context.h>
-#include <linux/pfn.h>
 #endif
 
 /***************************************************************************/
@@ -78,47 +77,10 @@ static void mcf54xx_reset(void)
 
 /***************************************************************************/
 
-#ifdef CONFIG_MMU
-
-unsigned long num_pages;
-
-static void __init mcf54xx_bootmem_alloc(void)
-{
-	unsigned long start_pfn;
-	unsigned long memstart;
-
-	/* _rambase and _ramend will be naturally page aligned */
-	m68k_memory[0].addr = _rambase;
-	m68k_memory[0].size = _ramend - _rambase;
-
-	/* compute total pages in system */
-	num_pages = PFN_DOWN(_ramend - _rambase);
-
-	/* page numbers */
-	memstart = PAGE_ALIGN(_ramstart);
-	min_low_pfn = PFN_DOWN(_rambase);
-	start_pfn = PFN_DOWN(memstart);
-	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
-	high_memory = (void *)_ramend;
-
-	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
-	module_fixup(NULL, __start_fixup, __stop_fixup);
-
-	/* setup bootmem data */
-	m68k_setup_node(0);
-	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
-		min_low_pfn, max_low_pfn);
-	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
-}
-
-#endif /* CONFIG_MMU */
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #ifdef CONFIG_MMU
-	mcf54xx_bootmem_alloc();
+	cf_bootmem_alloc();
 	mmu_context_init();
 #endif
 	mach_reset = mcf54xx_reset;