Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

1 files changed, 4 insertions, 68 deletions

diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
index 3d17fac..cc1b1d2 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
@@ -32,86 +32,22 @@
 #include <linux/module.h>
 
 #include <asm/octeon/cvmx.h>
-#include <asm/octeon/cvmx-spinlock.h>
 #include <asm/octeon/cvmx-sysinfo.h>
 
-/**
+/*
  * This structure defines the private state maintained by sysinfo module.
- *
  */
-static struct {
-	struct cvmx_sysinfo sysinfo;	   /* system information */
-	cvmx_spinlock_t lock;	   /* mutex spinlock */
-
-} state = {
-	.lock = CVMX_SPINLOCK_UNLOCKED_INITIALIZER
-};
-
+static struct cvmx_sysinfo sysinfo;	   /* system information */
 
 /*
- * Global variables that define the min/max of the memory region set
- * up for 32 bit userspace access.
- */
-uint64_t linux_mem32_min;
-uint64_t linux_mem32_max;
-uint64_t linux_mem32_wired;
-uint64_t linux_mem32_offset;
-
-/**
- * This function returns the application information as obtained
+ * Returns the application information as obtained
  * by the bootloader.  This provides the core mask of the cores
  * running the same application image, as well as the physical
  * memory regions available to the core.
- *
- * Returns  Pointer to the boot information structure
- *
  */
 struct cvmx_sysinfo *cvmx_sysinfo_get(void)
 {
-	return &(state.sysinfo);
+	return &sysinfo;
 }
 EXPORT_SYMBOL(cvmx_sysinfo_get);
 
-/**
- * This function is used in non-simple executive environments (such as
- * Linux kernel, u-boot, etc.)	to configure the minimal fields that
- * are required to use simple executive files directly.
- *
- * Locking (if required) must be handled outside of this
- * function
- *
- * @phy_mem_desc_ptr:
- *		     Pointer to global physical memory descriptor
- *		     (bootmem descriptor) @board_type: Octeon board
- *		     type enumeration
- *
- * @board_rev_major:
- *		     Board major revision
- * @board_rev_minor:
- *		     Board minor revision
- * @cpu_clock_hz:
- *		     CPU clock freqency in hertz
- *
- * Returns 0: Failure
- *	   1: success
- */
-int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
-				    uint16_t board_type,
-				    uint8_t board_rev_major,
-				    uint8_t board_rev_minor,
-				    uint32_t cpu_clock_hz)
-{
-
-	/* The sysinfo structure was already initialized */
-	if (state.sysinfo.board_type)
-		return 0;
-
-	memset(&(state.sysinfo), 0x0, sizeof(state.sysinfo));
-	state.sysinfo.phy_mem_desc_ptr = phy_mem_desc_ptr;
-	state.sysinfo.board_type = board_type;
-	state.sysinfo.board_rev_major = board_rev_major;
-	state.sysinfo.board_rev_minor = board_rev_minor;
-	state.sysinfo.cpu_clock_hz = cpu_clock_hz;
-
-	return 1;
-}