Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.

  The executive summary:

   - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
   - Avoid useless rebuilds for zboot.
   - jz4780: Add NEMC, BCH and NAND device tree nodes
   - Initial support for the MicroChip's DT platform.  As all the device
     drivers are missing this is still of limited use.
   - Some Loongson3 cleanups.
   - The unavoidable whitespace polishing.
   - Reduce clock skew when synchronizing the CPU cycle counters on CPU
     startup.
   - Add MIPS R6 fixes.
   - Lots of cleanups across arch/mips as fallout from KVM.
   - Lots of minor fixes and changes for IEEE 754-2008 support to the
     FPU emulator / fp-assist software.
   - Minor Ralink, BCM47xx and bcm963xx platform support improvments.
   - Support SMP on BCM63168"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
  MIPS: zboot: Add support for serial debug using the PROM
  MIPS: zboot: Avoid useless rebuilds
  MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
  MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
  MIPS: bcm963xx: Update bcm_tag field image_sequence
  MIPS: bcm963xx: Move extended flash address to bcm_tag header file
  MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
  MIPS: bcm63xx: nvram: Use nvram structure definition from header file
  MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
  MAINTAINERS: Add KVM for MIPS entry
  MIPS: KVM: Add missing newline to kvm_err()
  MIPS: Move KVM specific opcodes into asm/inst.h
  MIPS: KVM: Use cacheops.h definitions
  MIPS: Break down cacheops.h definitions
  MIPS: Use EXCCODE_ constants with set_except_vector()
  MIPS: Update trap codes
  MIPS: Move Cause.ExcCode trap codes to mipsregs.h
  MIPS: KVM: Make kvm_mips_{init,exit}() static
  MIPS: KVM: Refactor added offsetof()s
  MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
  ...

1 files changed, 161 insertions, 0 deletions

diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6b90644..b725b71 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -99,6 +99,161 @@ static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
 }
 
 /*
+ * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
+ * supported by FPU hardware.
+ */
+static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
+{
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+		unsigned long sr, fir, fcsr, fcsr0, fcsr1;
+
+		sr = read_c0_status();
+		__enable_fpu(FPU_AS_IS);
+
+		fir = read_32bit_cp1_register(CP1_REVISION);
+		if (fir & MIPS_FPIR_HAS2008) {
+			fcsr = read_32bit_cp1_register(CP1_STATUS);
+
+			fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+			write_32bit_cp1_register(CP1_STATUS, fcsr0);
+			fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+			fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+			write_32bit_cp1_register(CP1_STATUS, fcsr1);
+			fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+			write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+			if (!(fcsr0 & FPU_CSR_NAN2008))
+				c->options |= MIPS_CPU_NAN_LEGACY;
+			if (fcsr1 & FPU_CSR_NAN2008)
+				c->options |= MIPS_CPU_NAN_2008;
+
+			if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
+				c->fpu_msk31 &= ~FPU_CSR_ABS2008;
+			else
+				c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
+
+			if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
+				c->fpu_msk31 &= ~FPU_CSR_NAN2008;
+			else
+				c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
+		} else {
+			c->options |= MIPS_CPU_NAN_LEGACY;
+		}
+
+		write_c0_status(sr);
+	} else {
+		c->options |= MIPS_CPU_NAN_LEGACY;
+	}
+}
+
+/*
+ * IEEE 754 conformance mode to use.  Affects the NaN encoding and the
+ * ABS.fmt/NEG.fmt execution mode.
+ */
+static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
+
+/*
+ * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
+ * to support by the FPU emulator according to the IEEE 754 conformance
+ * mode selected.  Note that "relaxed" straps the emulator so that it
+ * allows 2008-NaN binaries even for legacy processors.
+ */
+static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
+{
+	c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
+	c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+	c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+
+	switch (ieee754) {
+	case STRICT:
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+				    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+				    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+			c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+		} else {
+			c->options |= MIPS_CPU_NAN_LEGACY;
+			c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		}
+		break;
+	case LEGACY:
+		c->options |= MIPS_CPU_NAN_LEGACY;
+		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		break;
+	case STD2008:
+		c->options |= MIPS_CPU_NAN_2008;
+		c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		break;
+	case RELAXED:
+		c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+		break;
+	}
+}
+
+/*
+ * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * according to the "ieee754=" parameter.
+ */
+static void cpu_set_nan_2008(struct cpuinfo_mips *c)
+{
+	switch (ieee754) {
+	case STRICT:
+		mips_use_nan_legacy = !!cpu_has_nan_legacy;
+		mips_use_nan_2008 = !!cpu_has_nan_2008;
+		break;
+	case LEGACY:
+		mips_use_nan_legacy = !!cpu_has_nan_legacy;
+		mips_use_nan_2008 = !cpu_has_nan_legacy;
+		break;
+	case STD2008:
+		mips_use_nan_legacy = !cpu_has_nan_2008;
+		mips_use_nan_2008 = !!cpu_has_nan_2008;
+		break;
+	case RELAXED:
+		mips_use_nan_legacy = true;
+		mips_use_nan_2008 = true;
+		break;
+	}
+}
+
+/*
+ * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
+ * settings:
+ *
+ * strict:  accept binaries that request a NaN encoding supported by the FPU
+ * legacy:  only accept legacy-NaN binaries
+ * 2008:    only accept 2008-NaN binaries
+ * relaxed: accept any binaries regardless of whether supported by the FPU
+ */
+static int __init ieee754_setup(char *s)
+{
+	if (!s)
+		return -1;
+	else if (!strcmp(s, "strict"))
+		ieee754 = STRICT;
+	else if (!strcmp(s, "legacy"))
+		ieee754 = LEGACY;
+	else if (!strcmp(s, "2008"))
+		ieee754 = STD2008;
+	else if (!strcmp(s, "relaxed"))
+		ieee754 = RELAXED;
+	else
+		return -1;
+
+	if (!(boot_cpu_data.options & MIPS_CPU_FPU))
+		cpu_set_nofpu_2008(&boot_cpu_data);
+	cpu_set_nan_2008(&boot_cpu_data);
+
+	return 0;
+}
+
+early_param("ieee754", ieee754_setup);
+
+/*
  * Set the FIR feature flags for the FPU emulator.
  */
 static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
@@ -113,6 +268,8 @@ static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
 	if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
 			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
 		value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
+	if (c->options & MIPS_CPU_NAN_2008)
+		value |= MIPS_FPIR_HAS2008;
 	c->fpu_id = value;
 }
 
@@ -137,6 +294,8 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
 	}
 
 	cpu_set_fpu_fcsr_mask(c);
+	cpu_set_fpu_2008(c);
+	cpu_set_nan_2008(c);
 }
 
 /*
@@ -147,6 +306,8 @@ static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
 	c->options &= ~MIPS_CPU_FPU;
 	c->fpu_msk31 = mips_nofpu_msk31;
 
+	cpu_set_nofpu_2008(c);
+	cpu_set_nan_2008(c);
 	cpu_set_nofpu_id(c);
 }