diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2013-02-21 11:51:33 (GMT) |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2013-02-21 11:51:33 (GMT) |
commit | 8bfc245f9ad7bd4e461179e4e7852ef99b8b6144 (patch) | |
tree | 0ad091f645fbc8318634599d278966a53d3922ee /arch/mips/kernel | |
parent | 612663a974065c3445e641d046769fe4c55a6438 (diff) | |
parent | 535237cecab2b078114be712c67e89a0db61965f (diff) | |
download | linux-8bfc245f9ad7bd4e461179e4e7852ef99b8b6144.tar.xz |
Merge branch 'mips-next-3.9' of git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r-- | arch/mips/kernel/Makefile | 32 | ||||
-rw-r--r-- | arch/mips/kernel/cpu-probe.c | 14 | ||||
-rw-r--r-- | arch/mips/kernel/csrc-gic.c | 49 | ||||
-rw-r--r-- | arch/mips/kernel/early_printk.c | 5 | ||||
-rw-r--r-- | arch/mips/kernel/irq_cpu.c | 42 | ||||
-rw-r--r-- | arch/mips/kernel/proc.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/setup.c | 91 | ||||
-rw-r--r-- | arch/mips/kernel/smtc.c | 1 | ||||
-rw-r--r-- | arch/mips/kernel/vpe.c | 15 |
9 files changed, 214 insertions, 37 deletions
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index c48ed92..f81d98f 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o +obj-$(CONFIG_CSRC_GIC) += csrc-gic.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o obj-$(CONFIG_STACKTRACE) += stacktrace.o @@ -98,4 +99,35 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o +# +# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe +# to enable DSP assembler support here even if the MIPS Release 2 CPU we +# are targetting does not support DSP because all code-paths making use of +# it properly check that the running CPU *actually does* support these +# instructions. +# +ifeq ($(CONFIG_CPU_MIPSR2), y) +CFLAGS_DSP = -DHAVE_AS_DSP + +# +# Check if assembler supports DSP ASE +# +ifeq ($(call cc-option-yn,-mdsp), y) +CFLAGS_DSP += -mdsp +endif + +# +# Check if assembler supports DSP ASE Rev2 +# +ifeq ($(call cc-option-yn,-mdspr2), y) +CFLAGS_DSP += -mdspr2 +endif + +CFLAGS_signal.o = $(CFLAGS_DSP) +CFLAGS_signal32.o = $(CFLAGS_DSP) +CFLAGS_process.o = $(CFLAGS_DSP) +CFLAGS_branch.o = $(CFLAGS_DSP) +CFLAGS_ptrace.o = $(CFLAGS_DSP) +endif + CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 2656c89..6bfccc2 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -201,6 +201,7 @@ void __init check_wait(void) break; case CPU_M14KC: + case CPU_M14KEC: case CPU_24K: case CPU_34K: case CPU_1004K: @@ -467,6 +468,10 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) c->ases |= MIPS_ASE_MIPSMT; if (config3 & MIPS_CONF3_ULRI) c->options |= MIPS_CPU_ULRI; + if (config3 & MIPS_CONF3_ISA) + c->options |= MIPS_CPU_MICROMIPS; + if (config3 & MIPS_CONF3_VZ) + c->ases |= MIPS_ASE_VZ; return config3 & MIPS_CONF_M; } @@ -866,10 +871,13 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "MIPS 20Kc"; break; case PRID_IMP_24K: - case PRID_IMP_24KE: c->cputype = CPU_24K; __cpu_name[cpu] = "MIPS 24Kc"; break; + case PRID_IMP_24KE: + c->cputype = CPU_24K; + __cpu_name[cpu] = "MIPS 24KEc"; + break; case PRID_IMP_25KF: c->cputype = CPU_25KF; __cpu_name[cpu] = "MIPS 25Kc"; @@ -886,6 +894,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_M14KC; __cpu_name[cpu] = "MIPS M14Kc"; break; + case PRID_IMP_M14KEC: + c->cputype = CPU_M14KEC; + __cpu_name[cpu] = "MIPS M14KEc"; + break; case PRID_IMP_1004K: c->cputype = CPU_1004K; __cpu_name[cpu] = "MIPS 1004Kc"; diff --git a/arch/mips/kernel/csrc-gic.c b/arch/mips/kernel/csrc-gic.c new file mode 100644 index 0000000..5dca24b --- /dev/null +++ b/arch/mips/kernel/csrc-gic.c @@ -0,0 +1,49 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + */ +#include <linux/clocksource.h> +#include <linux/init.h> + +#include <asm/time.h> +#include <asm/gic.h> + +static cycle_t gic_hpt_read(struct clocksource *cs) +{ + unsigned int hi, hi2, lo; + + do { + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi); + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), lo); + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi2); + } while (hi2 != hi); + + return (((cycle_t) hi) << 32) + lo; +} + +static struct clocksource gic_clocksource = { + .name = "GIC", + .read = gic_hpt_read, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init gic_clocksource_init(unsigned int frequency) +{ + unsigned int config, bits; + + /* Calculate the clocksource mask. */ + GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), config); + bits = 32 + ((config & GIC_SH_CONFIG_COUNTBITS_MSK) >> + (GIC_SH_CONFIG_COUNTBITS_SHF - 2)); + + /* Set clocksource mask. */ + gic_clocksource.mask = CLOCKSOURCE_MASK(bits); + + /* Calculate a somewhat reasonable rating value. */ + gic_clocksource.rating = 200 + frequency / 10000000; + + clocksource_register_hz(&gic_clocksource, frequency); +} diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c index 9ae813e..9e6440e 100644 --- a/arch/mips/kernel/early_printk.c +++ b/arch/mips/kernel/early_printk.c @@ -14,8 +14,7 @@ extern void prom_putchar(char); -static void __init -early_console_write(struct console *con, const char *s, unsigned n) +static void early_console_write(struct console *con, const char *s, unsigned n) { while (n-- && *s) { if (*s == '\n') @@ -25,7 +24,7 @@ early_console_write(struct console *con, const char *s, unsigned n) } } -static struct console early_console __initdata = { +static struct console early_console = { .name = "early", .write = early_console_write, .flags = CON_PRINTBUFFER | CON_BOOT, diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 0207a44..72ef2d2 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -31,6 +31,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> @@ -113,3 +114,44 @@ void __init mips_cpu_irq_init(void) irq_set_chip_and_handler(i, &mips_cpu_irq_controller, handle_percpu_irq); } + +#ifdef CONFIG_IRQ_DOMAIN +static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + static struct irq_chip *chip; + + if (hw < 2 && cpu_has_mipsmt) { + /* Software interrupts are used for MT/CMT IPI */ + chip = &mips_mt_cpu_irq_controller; + } else { + chip = &mips_cpu_irq_controller; + } + + irq_set_chip_and_handler(irq, chip, handle_percpu_irq); + + return 0; +} + +static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = { + .map = mips_cpu_intc_map, + .xlate = irq_domain_xlate_onecell, +}; + +int __init mips_cpu_intc_init(struct device_node *of_node, + struct device_node *parent) +{ + struct irq_domain *domain; + + /* Mask interrupts. */ + clear_c0_status(ST0_IM); + clear_c0_cause(CAUSEF_IP); + + domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0, + &mips_cpu_intc_irq_domain_ops, NULL); + if (!domain) + panic("Failed to add irqdomain for MIPS CPU\n"); + + return 0; +} +#endif /* CONFIG_IRQ_DOMAIN */ diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 79d4b8e..135c4aa 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -95,6 +95,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_has_dsp) seq_printf(m, "%s", " dsp"); if (cpu_has_dsp2) seq_printf(m, "%s", " dsp2"); if (cpu_has_mipsmt) seq_printf(m, "%s", " mt"); + if (cpu_has_mmips) seq_printf(m, "%s", " micromips"); + if (cpu_has_vz) seq_printf(m, "%s", " vz"); seq_printf(m, "\n"); seq_printf(m, "shadow register sets\t: %d\n", diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 653197e..4c774d5 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -480,34 +480,75 @@ static int __init early_parse_mem(char *p) } early_param("mem", early_parse_mem); -static void __init arch_mem_init(char **cmdline_p) +#ifdef CONFIG_PROC_VMCORE +unsigned long setup_elfcorehdr, setup_elfcorehdr_size; +static int __init early_parse_elfcorehdr(char *p) +{ + int i; + + setup_elfcorehdr = memparse(p, &p); + + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long start = boot_mem_map.map[i].addr; + unsigned long end = (boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + if (setup_elfcorehdr >= start && setup_elfcorehdr < end) { + /* + * Reserve from the elf core header to the end of + * the memory segment, that should all be kdump + * reserved memory. + */ + setup_elfcorehdr_size = end - setup_elfcorehdr; + break; + } + } + /* + * If we don't find it in the memory map, then we shouldn't + * have to worry about it, as the new kernel won't use it. + */ + return 0; +} +early_param("elfcorehdr", early_parse_elfcorehdr); +#endif + +static void __init arch_mem_addpart(phys_t mem, phys_t end, int type) { - phys_t init_mem, init_end, init_size; + phys_t size; + int i; + size = end - mem; + if (!size) + return; + + /* Make sure it is in the boot_mem_map */ + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (mem >= boot_mem_map.map[i].addr && + mem < (boot_mem_map.map[i].addr + + boot_mem_map.map[i].size)) + return; + } + add_memory_region(mem, size, type); +} + +static void __init arch_mem_init(char **cmdline_p) +{ extern void plat_mem_setup(void); /* call board setup routine */ plat_mem_setup(); - init_mem = PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT; - init_end = PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT; - init_size = init_end - init_mem; - if (init_size) { - /* Make sure it is in the boot_mem_map */ - int i, found; - found = 0; - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (init_mem >= boot_mem_map.map[i].addr && - init_mem < (boot_mem_map.map[i].addr + - boot_mem_map.map[i].size)) { - found = 1; - break; - } - } - if (!found) - add_memory_region(init_mem, init_size, - BOOT_MEM_INIT_RAM); - } + /* + * Make sure all kernel memory is in the maps. The "UP" and + * "DOWN" are opposite for initdata since if it crosses over + * into another memory section you don't want that to be + * freed when the initdata is freed. + */ + arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT, + PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT, + BOOT_MEM_RAM); + arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT, + PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT, + BOOT_MEM_INIT_RAM); pr_info("Determined physical RAM map:\n"); print_memory_map(); @@ -537,6 +578,14 @@ static void __init arch_mem_init(char **cmdline_p) } bootmem_init(); +#ifdef CONFIG_PROC_VMCORE + if (setup_elfcorehdr && setup_elfcorehdr_size) { + printk(KERN_INFO "kdump reserved memory at %lx-%lx\n", + setup_elfcorehdr, setup_elfcorehdr_size); + reserve_bootmem(setup_elfcorehdr, setup_elfcorehdr_size, + BOOTMEM_DEFAULT); + } +#endif #ifdef CONFIG_KEXEC if (crashk_res.start != crashk_res.end) reserve_bootmem(crashk_res.start, diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 1c152a9..7186222 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -41,6 +41,7 @@ #include <asm/addrspace.h> #include <asm/smtc.h> #include <asm/smtc_proc.h> +#include <asm/setup.h> /* * SMTC Kernel needs to manipulate low-level CPU interrupt mask diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 32fc5d4..b4c0152 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -697,18 +697,7 @@ static int vpe_run(struct vpe * v) dmt_flag = dmt(); vpeflags = dvpe(); - if (!list_empty(&v->tc)) { - if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { - evpe(vpeflags); - emt(dmt_flag); - local_irq_restore(flags); - - printk(KERN_WARNING - "VPE loader: TC %d is already in use.\n", - v->tc->index); - return -ENOEXEC; - } - } else { + if (list_empty(&v->tc)) { evpe(vpeflags); emt(dmt_flag); local_irq_restore(flags); @@ -720,6 +709,8 @@ static int vpe_run(struct vpe * v) return -ENOEXEC; } + t = list_first_entry(&v->tc, struct tc, tc); + /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); |