Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

22 files changed, 726 insertions, 1169 deletions

diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
deleted file mode 100644
index 2b857de..0000000
--- a/arch/mips/lantiq/xway/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if SOC_XWAY
-
-menu "MIPS Machine"
-
-config LANTIQ_MACH_EASY50712
-	bool "Easy50712 - Danube"
-	default y
-
-endmenu
-
-endif
-
-if SOC_AMAZON_SE
-
-menu "MIPS Machine"
-
-config LANTIQ_MACH_EASY50601
-	bool "Easy50601 - Amazon SE"
-	default y
-
-endmenu
-
-endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index c517f2e..dc3194f 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,7 +1 @@
-obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
-
-obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
-obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
-
-obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
-obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
deleted file mode 100644
index 6522583..0000000
--- a/arch/mips/lantiq/xway/clk-ase.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include <lantiq_soc.h>
-
-/* cgu registers */
-#define LTQ_CGU_SYS	0x0010
-
-unsigned int ltq_get_io_region_clock(void)
-{
-	return CLOCK_133M;
-}
-EXPORT_SYMBOL(ltq_get_io_region_clock);
-
-unsigned int ltq_get_fpi_bus_clock(int fpi)
-{
-	return CLOCK_133M;
-}
-EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
-
-unsigned int ltq_get_cpu_hz(void)
-{
-	if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
-		return CLOCK_266M;
-	else
-		return CLOCK_133M;
-}
-EXPORT_SYMBOL(ltq_get_cpu_hz);
-
-unsigned int ltq_get_fpi_hz(void)
-{
-	return CLOCK_133M;
-}
-EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
deleted file mode 100644
index 696b1a3..0000000
--- a/arch/mips/lantiq/xway/clk-xway.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include <lantiq_soc.h>
-
-static unsigned int ltq_ram_clocks[] = {
-	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
-#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
-
-#define BASIC_FREQUENCY_1	35328000
-#define BASIC_FREQUENCY_2	36000000
-#define BASIS_REQUENCY_USB	12000000
-
-#define GET_BITS(x, msb, lsb) \
-	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-
-#define LTQ_CGU_PLL0_CFG	0x0004
-#define LTQ_CGU_PLL1_CFG	0x0008
-#define LTQ_CGU_PLL2_CFG	0x000C
-#define LTQ_CGU_SYS		0x0010
-#define LTQ_CGU_UPDATE		0x0014
-#define LTQ_CGU_IF_CLK		0x0018
-#define LTQ_CGU_OSC_CON		0x001C
-#define LTQ_CGU_SMD		0x0020
-#define LTQ_CGU_CT1SR		0x0028
-#define LTQ_CGU_CT2SR		0x002C
-#define LTQ_CGU_PCMCR		0x0030
-#define LTQ_CGU_PCI_CR		0x0034
-#define LTQ_CGU_PD_PC		0x0038
-#define LTQ_CGU_FMR		0x003C
-
-#define CGU_PLL0_PHASE_DIVIDER_ENABLE	\
-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
-#define CGU_PLL0_BYPASS			\
-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
-#define CGU_PLL0_CFG_DSMSEL		\
-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
-#define CGU_PLL0_CFG_FRAC_EN		\
-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
-#define CGU_PLL1_SRC			\
-	(ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
-#define CGU_PLL2_PHASE_DIVIDER_ENABLE	\
-	(ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
-#define CGU_SYS_FPI_SEL			(1 << 6)
-#define CGU_SYS_DDR_SEL			0x3
-#define CGU_PLL0_SRC			(1 << 29)
-
-#define CGU_PLL0_CFG_PLLK	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
-#define CGU_PLL0_CFG_PLLN	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
-#define CGU_PLL0_CFG_PLLM	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
-#define CGU_PLL2_SRC		GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
-#define CGU_PLL2_CFG_INPUT_DIV	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
-
-static unsigned int ltq_get_pll0_fdiv(void);
-
-static inline unsigned int get_input_clock(int pll)
-{
-	switch (pll) {
-	case 0:
-		if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
-			return BASIS_REQUENCY_USB;
-		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
-			return BASIC_FREQUENCY_1;
-		else
-			return BASIC_FREQUENCY_2;
-	case 1:
-		if (CGU_PLL1_SRC)
-			return BASIS_REQUENCY_USB;
-		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
-			return BASIC_FREQUENCY_1;
-		else
-			return BASIC_FREQUENCY_2;
-	case 2:
-		switch (CGU_PLL2_SRC) {
-		case 0:
-			return ltq_get_pll0_fdiv();
-		case 1:
-			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
-				BASIC_FREQUENCY_1 :
-				BASIC_FREQUENCY_2;
-		case 2:
-			return BASIS_REQUENCY_USB;
-		}
-	default:
-		return 0;
-	}
-}
-
-static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
-{
-	u64 res, clock = get_input_clock(pll);
-
-	res = num * clock;
-	do_div(res, den);
-	return res;
-}
-
-static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
-	unsigned int K)
-{
-	unsigned int num = ((N + 1) << 10) + K;
-	unsigned int den = (M + 1) << 10;
-
-	return cal_dsm(pll, num, den);
-}
-
-static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
-	unsigned int K)
-{
-	unsigned int num = ((N + 1) << 11) + K + 512;
-	unsigned int den = (M + 1) << 11;
-
-	return cal_dsm(pll, num, den);
-}
-
-static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
-	unsigned int K)
-{
-	unsigned int num = K >= 512 ?
-		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
-	unsigned int den = (M + 1) << 12;
-
-	return cal_dsm(pll, num, den);
-}
-
-static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
-	unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
-{
-	if (!dsmsel)
-		return mash_dsm(pll, M, N, K);
-	else if (!phase_div_en)
-		return mash_dsm(pll, M, N, K);
-	else
-		return ssff_dsm_2(pll, M, N, K);
-}
-
-static inline unsigned int ltq_get_pll0_fosc(void)
-{
-	if (CGU_PLL0_BYPASS)
-		return get_input_clock(0);
-	else
-		return !CGU_PLL0_CFG_FRAC_EN
-			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
-				CGU_PLL0_CFG_DSMSEL,
-				CGU_PLL0_PHASE_DIVIDER_ENABLE)
-			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
-				CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
-				CGU_PLL0_PHASE_DIVIDER_ENABLE);
-}
-
-static unsigned int ltq_get_pll0_fdiv(void)
-{
-	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
-
-	return (ltq_get_pll0_fosc() + (div >> 1)) / div;
-}
-
-unsigned int ltq_get_io_region_clock(void)
-{
-	unsigned int ret = ltq_get_pll0_fosc();
-
-	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
-	default:
-	case 0:
-		return (ret + 1) / 2;
-	case 1:
-		return (ret * 2 + 2) / 5;
-	case 2:
-		return (ret + 1) / 3;
-	case 3:
-		return (ret + 2) / 4;
-	}
-}
-EXPORT_SYMBOL(ltq_get_io_region_clock);
-
-unsigned int ltq_get_fpi_bus_clock(int fpi)
-{
-	unsigned int ret = ltq_get_io_region_clock();
-
-	if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
-		ret >>= 1;
-	return ret;
-}
-EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
-
-unsigned int ltq_get_cpu_hz(void)
-{
-	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
-	case 0:
-		return CLOCK_333M;
-	case 4:
-		return DDR_HZ;
-	case 8:
-		return DDR_HZ << 1;
-	default:
-		return DDR_HZ >> 1;
-	}
-}
-EXPORT_SYMBOL(ltq_get_cpu_hz);
-
-unsigned int ltq_get_fpi_hz(void)
-{
-	unsigned int ddr_clock = DDR_HZ;
-
-	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
-		return ddr_clock >> 1;
-	return ddr_clock;
-}
-EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
new file mode 100644
index 0000000..9aa17f7
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk.c
@@ -0,0 +1,151 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+#include "../clk.h"
+
+static unsigned int ram_clocks[] = {
+	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+#define DDR_HZ ram_clocks[ltq_cgu_r32(CGU_SYS) & 0x3]
+
+/* legacy xway clock */
+#define CGU_SYS			0x10
+
+/* vr9 clock */
+#define CGU_SYS_VR9		0x0c
+#define CGU_IF_CLK_VR9		0x24
+
+unsigned long ltq_danube_fpi_hz(void)
+{
+	unsigned long ddr_clock = DDR_HZ;
+
+	if (ltq_cgu_r32(CGU_SYS) & 0x40)
+		return ddr_clock >> 1;
+	return ddr_clock;
+}
+
+unsigned long ltq_danube_cpu_hz(void)
+{
+	switch (ltq_cgu_r32(CGU_SYS) & 0xc) {
+	case 0:
+		return CLOCK_333M;
+	case 4:
+		return DDR_HZ;
+	case 8:
+		return DDR_HZ << 1;
+	default:
+		return DDR_HZ >> 1;
+	}
+}
+
+unsigned long ltq_ar9_sys_hz(void)
+{
+	if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2)
+		return CLOCK_393M;
+	return CLOCK_333M;
+}
+
+unsigned long ltq_ar9_fpi_hz(void)
+{
+	unsigned long sys = ltq_ar9_sys_hz();
+
+	if (ltq_cgu_r32(CGU_SYS) & BIT(0))
+		return sys;
+	return sys >> 1;
+}
+
+unsigned long ltq_ar9_cpu_hz(void)
+{
+	if (ltq_cgu_r32(CGU_SYS) & BIT(2))
+		return ltq_ar9_fpi_hz();
+	else
+		return ltq_ar9_sys_hz();
+}
+
+unsigned long ltq_vr9_cpu_hz(void)
+{
+	unsigned int cpu_sel;
+	unsigned long clk;
+
+	cpu_sel = (ltq_cgu_r32(CGU_SYS_VR9) >> 4) & 0xf;
+
+	switch (cpu_sel) {
+	case 0:
+		clk = CLOCK_600M;
+		break;
+	case 1:
+		clk = CLOCK_500M;
+		break;
+	case 2:
+		clk = CLOCK_393M;
+		break;
+	case 3:
+		clk = CLOCK_333M;
+		break;
+	case 5:
+	case 6:
+		clk = CLOCK_196_608M;
+		break;
+	case 7:
+		clk = CLOCK_167M;
+		break;
+	case 4:
+	case 8:
+	case 9:
+		clk = CLOCK_125M;
+		break;
+	default:
+		clk = 0;
+		break;
+	}
+
+	return clk;
+}
+
+unsigned long ltq_vr9_fpi_hz(void)
+{
+	unsigned int ocp_sel, cpu_clk;
+	unsigned long clk;
+
+	cpu_clk = ltq_vr9_cpu_hz();
+	ocp_sel = ltq_cgu_r32(CGU_SYS_VR9) & 0x3;
+
+	switch (ocp_sel) {
+	case 0:
+		/* OCP ratio 1 */
+		clk = cpu_clk;
+		break;
+	case 2:
+		/* OCP ratio 2 */
+		clk = cpu_clk / 2;
+		break;
+	case 3:
+		/* OCP ratio 2.5 */
+		clk = (cpu_clk * 2) / 5;
+		break;
+	case 4:
+		/* OCP ratio 3 */
+		clk = cpu_clk / 3;
+		break;
+	default:
+		clk = 0;
+		break;
+	}
+
+	return clk;
+}
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
deleted file mode 100644
index d614aa7..0000000
--- a/arch/mips/lantiq/xway/devices.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mtd/physmap.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/etherdevice.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_irq.h>
-#include <lantiq_platform.h>
-
-#include "devices.h"
-
-/* gpio */
-static struct resource ltq_gpio_resource[] = {
-	{
-		.name	= "gpio0",
-		.start  = LTQ_GPIO0_BASE_ADDR,
-		.end    = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.name	= "gpio1",
-		.start  = LTQ_GPIO1_BASE_ADDR,
-		.end    = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.name	= "gpio2",
-		.start  = LTQ_GPIO2_BASE_ADDR,
-		.end    = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	}
-};
-
-void __init ltq_register_gpio(void)
-{
-	platform_device_register_simple("ltq_gpio", 0,
-		&ltq_gpio_resource[0], 1);
-	platform_device_register_simple("ltq_gpio", 1,
-		&ltq_gpio_resource[1], 1);
-
-	/* AR9 and VR9 have an extra gpio block */
-	if (ltq_is_ar9() || ltq_is_vr9()) {
-		platform_device_register_simple("ltq_gpio", 2,
-			&ltq_gpio_resource[2], 1);
-	}
-}
-
-/* serial to parallel conversion */
-static struct resource ltq_stp_resource = {
-	.name   = "stp",
-	.start  = LTQ_STP_BASE_ADDR,
-	.end    = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1,
-	.flags  = IORESOURCE_MEM,
-};
-
-void __init ltq_register_gpio_stp(void)
-{
-	platform_device_register_simple("ltq_stp", 0, &ltq_stp_resource, 1);
-}
-
-/* asc ports - amazon se has its own serial mapping */
-static struct resource ltq_ase_asc_resources[] = {
-	{
-		.name	= "asc0",
-		.start  = LTQ_ASC1_BASE_ADDR,
-		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	IRQ_RES(tx, LTQ_ASC_ASE_TIR),
-	IRQ_RES(rx, LTQ_ASC_ASE_RIR),
-	IRQ_RES(err, LTQ_ASC_ASE_EIR),
-};
-
-void __init ltq_register_ase_asc(void)
-{
-	platform_device_register_simple("ltq_asc", 0,
-		ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
-}
-
-/* ethernet */
-static struct resource ltq_etop_resources = {
-	.name	= "etop",
-	.start	= LTQ_ETOP_BASE_ADDR,
-	.end	= LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device ltq_etop = {
-	.name		= "ltq_etop",
-	.resource	= &ltq_etop_resources,
-	.num_resources	= 1,
-};
-
-void __init
-ltq_register_etop(struct ltq_eth_data *eth)
-{
-	if (eth) {
-		ltq_etop.dev.platform_data = eth;
-		platform_device_register(&ltq_etop);
-	}
-}
diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
deleted file mode 100644
index e904934..0000000
--- a/arch/mips/lantiq/xway/devices.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LTQ_DEVICES_XWAY_H__
-#define _LTQ_DEVICES_XWAY_H__
-
-#include "../devices.h"
-#include <linux/phy.h>
-
-extern void ltq_register_gpio(void);
-extern void ltq_register_gpio_stp(void);
-extern void ltq_register_ase_asc(void);
-extern void ltq_register_etop(struct ltq_eth_data *eth);
-
-#endif
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index b210e93..55d2c4f 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -19,7 +19,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
-#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/clk.h>
 
 #include <lantiq_soc.h>
 #include <xway_dma.h>
@@ -55,13 +56,6 @@
 #define ltq_dma_w32_mask(x, y, z)	ltq_w32_mask(x, y, \
 						ltq_dma_membase + (z))
 
-static struct resource ltq_dma_resource = {
-	.name	= "dma",
-	.start	= LTQ_DMA_BASE_ADDR,
-	.end	= LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1,
-	.flags  = IORESOURCE_MEM,
-};
-
 static void __iomem *ltq_dma_membase;
 
 void
@@ -215,27 +209,28 @@ ltq_dma_init_port(int p)
 }
 EXPORT_SYMBOL_GPL(ltq_dma_init_port);
 
-int __init
-ltq_dma_init(void)
+static int __devinit
+ltq_dma_init(struct platform_device *pdev)
 {
+	struct clk *clk;
+	struct resource *res;
 	int i;
 
-	/* insert and request the memory region */
-	if (insert_resource(&iomem_resource, &ltq_dma_resource) < 0)
-		panic("Failed to insert dma memory");
-
-	if (request_mem_region(ltq_dma_resource.start,
-			resource_size(&ltq_dma_resource), "dma") < 0)
-		panic("Failed to request dma memory");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		panic("Failed to get dma resource");
 
 	/* remap dma register range */
-	ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start,
-				resource_size(&ltq_dma_resource));
+	ltq_dma_membase = devm_request_and_ioremap(&pdev->dev, res);
 	if (!ltq_dma_membase)
-		panic("Failed to remap dma memory");
+		panic("Failed to remap dma resource");
 
 	/* power up and reset the dma engine */
-	ltq_pmu_enable(PMU_DMA);
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		panic("Failed to get dma clock");
+
+	clk_enable(clk);
 	ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
 
 	/* disable all interrupts */
@@ -248,7 +243,29 @@ ltq_dma_init(void)
 		ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
 		ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
 	}
+	dev_info(&pdev->dev, "init done\n");
 	return 0;
 }
 
-postcore_initcall(ltq_dma_init);
+static const struct of_device_id dma_match[] = {
+	{ .compatible = "lantiq,dma-xway" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dma_match);
+
+static struct platform_driver dma_driver = {
+	.probe = ltq_dma_init,
+	.driver = {
+		.name = "dma-xway",
+		.owner = THIS_MODULE,
+		.of_match_table = dma_match,
+	},
+};
+
+int __init
+dma_init(void)
+{
+	return platform_driver_register(&dma_driver);
+}
+
+postcore_initcall(dma_init);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
deleted file mode 100644
index 862e3e8..0000000
--- a/arch/mips/lantiq/xway/ebu.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  EBU - the external bus unit attaches PCI, NOR and NAND
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-
-#include <lantiq_soc.h>
-
-/* all access to the ebu must be locked */
-DEFINE_SPINLOCK(ebu_lock);
-EXPORT_SYMBOL_GPL(ebu_lock);
-
-static struct resource ltq_ebu_resource = {
-	.name	= "ebu",
-	.start	= LTQ_EBU_BASE_ADDR,
-	.end	= LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-/* remapped base addr of the clock unit and external bus unit */
-void __iomem *ltq_ebu_membase;
-
-static int __init lantiq_ebu_init(void)
-{
-	/* insert and request the memory region */
-	if (insert_resource(&iomem_resource, &ltq_ebu_resource) < 0)
-		panic("Failed to insert ebu memory");
-
-	if (request_mem_region(ltq_ebu_resource.start,
-			resource_size(&ltq_ebu_resource), "ebu") < 0)
-		panic("Failed to request ebu memory");
-
-	/* remap ebu register range */
-	ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start,
-				resource_size(&ltq_ebu_resource));
-	if (!ltq_ebu_membase)
-		panic("Failed to remap ebu memory");
-
-	/* make sure to unprotect the memory region where flash is located */
-	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
-	return 0;
-}
-
-postcore_initcall(lantiq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index c429a5b..2ab39e9 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -36,18 +36,6 @@ struct ltq_gpio {
 
 static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
 
-int gpio_to_irq(unsigned int gpio)
-{
-	return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int irq_to_gpio(unsigned int gpio)
-{
-	return -EINVAL;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
 int ltq_gpio_request(unsigned int pin, unsigned int alt0,
 	unsigned int alt1, unsigned int dir, const char *name)
 {
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
deleted file mode 100644
index aae1717..0000000
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <lantiq_soc.h>
-
-/*
- * By attaching hardware latches to the EBU it is possible to create output
- * only gpios. This driver configures a special memory address, which when
- * written to outputs 16 bit to the latches.
- */
-
-#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */
-#define LTQ_EBU_WP	0x80000000	/* write protect bit */
-
-/* we keep a shadow value of the last value written to the ebu */
-static int ltq_ebu_gpio_shadow = 0x0;
-static void __iomem *ltq_ebu_gpio_membase;
-
-static void ltq_ebu_apply(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ebu_lock, flags);
-	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
-	*((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;
-	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
-	spin_unlock_irqrestore(&ebu_lock, flags);
-}
-
-static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (value)
-		ltq_ebu_gpio_shadow |= (1 << offset);
-	else
-		ltq_ebu_gpio_shadow &= ~(1 << offset);
-	ltq_ebu_apply();
-}
-
-static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,
-	int value)
-{
-	ltq_ebu_set(chip, offset, value);
-
-	return 0;
-}
-
-static struct gpio_chip ltq_ebu_chip = {
-	.label = "ltq_ebu",
-	.direction_output = ltq_ebu_direction_output,
-	.set = ltq_ebu_set,
-	.base = 72,
-	.ngpio = 16,
-	.can_sleep = 1,
-	.owner = THIS_MODULE,
-};
-
-static int ltq_ebu_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	if (!res) {
-		dev_err(&pdev->dev, "failed to get memory resource\n");
-		return -ENOENT;
-	}
-
-	res = devm_request_mem_region(&pdev->dev, res->start,
-		resource_size(res), dev_name(&pdev->dev));
-	if (!res) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		return -EBUSY;
-	}
-
-	ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,
-		resource_size(res));
-	if (!ltq_ebu_gpio_membase) {
-		dev_err(&pdev->dev, "Failed to ioremap mem region\n");
-		return -ENOMEM;
-	}
-
-	/* grab the default shadow value passed form the platform code */
-	ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;
-
-	/* tell the ebu controller which memory address we will be using */
-	ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);
-
-	/* write protect the region */
-	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
-
-	ret = gpiochip_add(&ltq_ebu_chip);
-	if (!ret)
-		ltq_ebu_apply();
-	return ret;
-}
-
-static struct platform_driver ltq_ebu_driver = {
-	.probe = ltq_ebu_probe,
-	.driver = {
-		.name = "ltq_ebu",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init ltq_ebu_init(void)
-{
-	int ret = platform_driver_register(&ltq_ebu_driver);
-
-	if (ret)
-		pr_info("ltq_ebu : Error registering platform driver!");
-	return ret;
-}
-
-postcore_initcall(ltq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
deleted file mode 100644
index fd07d87..0000000
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <lantiq_soc.h>
-
-#define LTQ_STP_CON0		0x00
-#define LTQ_STP_CON1		0x04
-#define LTQ_STP_CPU0		0x08
-#define LTQ_STP_CPU1		0x0C
-#define LTQ_STP_AR		0x10
-
-#define LTQ_STP_CON_SWU		(1 << 31)
-#define LTQ_STP_2HZ		0
-#define LTQ_STP_4HZ		(1 << 23)
-#define LTQ_STP_8HZ		(2 << 23)
-#define LTQ_STP_10HZ		(3 << 23)
-#define LTQ_STP_SPEED_MASK	(0xf << 23)
-#define LTQ_STP_UPD_FPI		(1 << 31)
-#define LTQ_STP_UPD_MASK	(3 << 30)
-#define LTQ_STP_ADSL_SRC	(3 << 24)
-
-#define LTQ_STP_GROUP0		(1 << 0)
-
-#define LTQ_STP_RISING		0
-#define LTQ_STP_FALLING		(1 << 26)
-#define LTQ_STP_EDGE_MASK	(1 << 26)
-
-#define ltq_stp_r32(reg)	__raw_readl(ltq_stp_membase + reg)
-#define ltq_stp_w32(val, reg)	__raw_writel(val, ltq_stp_membase + reg)
-#define ltq_stp_w32_mask(clear, set, reg) \
-		ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \
-		ltq_stp_membase + (reg))
-
-static int ltq_stp_shadow = 0xffff;
-static void __iomem *ltq_stp_membase;
-
-static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (value)
-		ltq_stp_shadow |= (1 << offset);
-	else
-		ltq_stp_shadow &= ~(1 << offset);
-	ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
-}
-
-static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
-	int value)
-{
-	ltq_stp_set(chip, offset, value);
-
-	return 0;
-}
-
-static struct gpio_chip ltq_stp_chip = {
-	.label = "ltq_stp",
-	.direction_output = ltq_stp_direction_output,
-	.set = ltq_stp_set,
-	.base = 48,
-	.ngpio = 24,
-	.can_sleep = 1,
-	.owner = THIS_MODULE,
-};
-
-static int ltq_stp_hw_init(void)
-{
-	/* the 3 pins used to control the external stp */
-	ltq_gpio_request(4, 1, 0, 1, "stp-st");
-	ltq_gpio_request(5, 1, 0, 1, "stp-d");
-	ltq_gpio_request(6, 1, 0, 1, "stp-sh");
-
-	/* sane defaults */
-	ltq_stp_w32(0, LTQ_STP_AR);
-	ltq_stp_w32(0, LTQ_STP_CPU0);
-	ltq_stp_w32(0, LTQ_STP_CPU1);
-	ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0);
-	ltq_stp_w32(0, LTQ_STP_CON1);
-
-	/* rising or falling edge */
-	ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
-
-	/* per default stp 15-0 are set */
-	ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
-
-	/* stp are update periodically by the FPI bus */
-	ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
-
-	/* set stp update speed */
-	ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
-
-	/* tell the hardware that pin (led) 0 and 1 are controlled
-	 *  by the dsl arc
-	 */
-	ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
-
-	ltq_pmu_enable(PMU_LED);
-	return 0;
-}
-
-static int __devinit ltq_stp_probe(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	int ret = 0;
-
-	if (!res)
-		return -ENOENT;
-	res = devm_request_mem_region(&pdev->dev, res->start,
-		resource_size(res), dev_name(&pdev->dev));
-	if (!res) {
-		dev_err(&pdev->dev, "failed to request STP memory\n");
-		return -EBUSY;
-	}
-	ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start,
-		resource_size(res));
-	if (!ltq_stp_membase) {
-		dev_err(&pdev->dev, "failed to remap STP memory\n");
-		return -ENOMEM;
-	}
-	ret = gpiochip_add(&ltq_stp_chip);
-	if (!ret)
-		ret = ltq_stp_hw_init();
-
-	return ret;
-}
-
-static struct platform_driver ltq_stp_driver = {
-	.probe = ltq_stp_probe,
-	.driver = {
-		.name = "ltq_stp",
-		.owner = THIS_MODULE,
-	},
-};
-
-int __init ltq_stp_init(void)
-{
-	int ret = platform_driver_register(&ltq_stp_driver);
-
-	if (ret)
-		pr_info("ltq_stp: error registering platform driver");
-	return ret;
-}
-
-postcore_initcall(ltq_stp_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
deleted file mode 100644
index d5aaf63..0000000
--- a/arch/mips/lantiq/xway/mach-easy50601.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-
-#include <lantiq.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-
-static struct mtd_partition easy50601_partitions[] = {
-	{
-		.name	= "uboot",
-		.offset	= 0x0,
-		.size	= 0x10000,
-	},
-	{
-		.name	= "uboot_env",
-		.offset	= 0x10000,
-		.size	= 0x10000,
-	},
-	{
-		.name	= "linux",
-		.offset	= 0x20000,
-		.size	= 0xE0000,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= 0x100000,
-		.size	= 0x300000,
-	},
-};
-
-static struct physmap_flash_data easy50601_flash_data = {
-	.nr_parts	= ARRAY_SIZE(easy50601_partitions),
-	.parts		= easy50601_partitions,
-};
-
-static void __init easy50601_init(void)
-{
-	ltq_register_nor(&easy50601_flash_data);
-}
-
-MIPS_MACHINE(LTQ_MACH_EASY50601,
-			"EASY50601",
-			"EASY50601 Eval Board",
-			easy50601_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
deleted file mode 100644
index ea5027b..0000000
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/phy.h>
-
-#include <lantiq_soc.h>
-#include <irq.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-
-static struct mtd_partition easy50712_partitions[] = {
-	{
-		.name	= "uboot",
-		.offset	= 0x0,
-		.size	= 0x10000,
-	},
-	{
-		.name	= "uboot_env",
-		.offset	= 0x10000,
-		.size	= 0x10000,
-	},
-	{
-		.name	= "linux",
-		.offset	= 0x20000,
-		.size	= 0xe0000,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= 0x100000,
-		.size	= 0x300000,
-	},
-};
-
-static struct physmap_flash_data easy50712_flash_data = {
-	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
-	.parts		= easy50712_partitions,
-};
-
-static struct ltq_pci_data ltq_pci_data = {
-	.clock	= PCI_CLOCK_INT,
-	.gpio	= PCI_GNT1 | PCI_REQ1,
-	.irq	= {
-		[14] = INT_NUM_IM0_IRL0 + 22,
-	},
-};
-
-static struct ltq_eth_data ltq_eth_data = {
-	.mii_mode = PHY_INTERFACE_MODE_MII,
-};
-
-static void __init easy50712_init(void)
-{
-	ltq_register_gpio_stp();
-	ltq_register_nor(&easy50712_flash_data);
-	ltq_register_pci(&ltq_pci_data);
-	ltq_register_etop(&ltq_eth_data);
-}
-
-MIPS_MACHINE(LTQ_MACH_EASY50712,
-	     "EASY50712",
-	     "EASY50712 Eval Board",
-	      easy50712_init);
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
deleted file mode 100644
index fe85361..0000000
--- a/arch/mips/lantiq/xway/pmu.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-
-#include <lantiq_soc.h>
-
-/* PMU - the power management unit allows us to turn part of the core
- * on and off
- */
-
-/* the enable / disable registers */
-#define LTQ_PMU_PWDCR	0x1C
-#define LTQ_PMU_PWDSR	0x20
-
-#define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
-#define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
-
-static struct resource ltq_pmu_resource = {
-	.name	= "pmu",
-	.start	= LTQ_PMU_BASE_ADDR,
-	.end	= LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static void __iomem *ltq_pmu_membase;
-
-void ltq_pmu_enable(unsigned int module)
-{
-	int err = 1000000;
-
-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
-	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
-
-	if (!err)
-		panic("activating PMU module failed!");
-}
-EXPORT_SYMBOL(ltq_pmu_enable);
-
-void ltq_pmu_disable(unsigned int module)
-{
-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
-}
-EXPORT_SYMBOL(ltq_pmu_disable);
-
-int __init ltq_pmu_init(void)
-{
-	if (insert_resource(&iomem_resource, &ltq_pmu_resource) < 0)
-		panic("Failed to insert pmu memory");
-
-	if (request_mem_region(ltq_pmu_resource.start,
-			resource_size(&ltq_pmu_resource), "pmu") < 0)
-		panic("Failed to request pmu memory");
-
-	ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start,
-				resource_size(&ltq_pmu_resource));
-	if (!ltq_pmu_membase)
-		panic("Failed to remap pmu memory");
-	return 0;
-}
-
-core_initcall(ltq_pmu_init);
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
deleted file mode 100644
index ae4959a..0000000
--- a/arch/mips/lantiq/xway/prom-ase.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/export.h>
-#include <linux/clk.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-
-#include <lantiq_soc.h>
-
-#include "../prom.h"
-
-#define SOC_AMAZON_SE	"Amazon_SE"
-
-#define PART_SHIFT	12
-#define PART_MASK	0x0FFFFFFF
-#define REV_SHIFT	28
-#define REV_MASK	0xF0000000
-
-void __init ltq_soc_detect(struct ltq_soc_info *i)
-{
-	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
-	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
-	switch (i->partnum) {
-	case SOC_ID_AMAZON_SE:
-		i->name = SOC_AMAZON_SE;
-		i->type = SOC_TYPE_AMAZON_SE;
-		break;
-
-	default:
-		unreachable();
-		break;
-	}
-}
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
deleted file mode 100644
index 2228133..0000000
--- a/arch/mips/lantiq/xway/prom-xway.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/export.h>
-#include <linux/clk.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-
-#include <lantiq_soc.h>
-
-#include "../prom.h"
-
-#define SOC_DANUBE	"Danube"
-#define SOC_TWINPASS	"Twinpass"
-#define SOC_AR9		"AR9"
-
-#define PART_SHIFT	12
-#define PART_MASK	0x0FFFFFFF
-#define REV_SHIFT	28
-#define REV_MASK	0xF0000000
-
-void __init ltq_soc_detect(struct ltq_soc_info *i)
-{
-	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
-	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
-	switch (i->partnum) {
-	case SOC_ID_DANUBE1:
-	case SOC_ID_DANUBE2:
-		i->name = SOC_DANUBE;
-		i->type = SOC_TYPE_DANUBE;
-		break;
-
-	case SOC_ID_TWINPASS:
-		i->name = SOC_TWINPASS;
-		i->type = SOC_TYPE_DANUBE;
-		break;
-
-	case SOC_ID_ARX188:
-	case SOC_ID_ARX168:
-	case SOC_ID_ARX182:
-		i->name = SOC_AR9;
-		i->type = SOC_TYPE_AR9;
-		break;
-
-	default:
-		unreachable();
-		break;
-	}
-}
diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
new file mode 100644
index 0000000..248429a
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom.c
@@ -0,0 +1,115 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/export.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_DANUBE	"Danube"
+#define SOC_TWINPASS	"Twinpass"
+#define SOC_AMAZON_SE	"Amazon_SE"
+#define SOC_AR9		"AR9"
+#define SOC_GR9		"GR9"
+#define SOC_VR9		"VR9"
+
+#define COMP_DANUBE	"lantiq,danube"
+#define COMP_TWINPASS	"lantiq,twinpass"
+#define COMP_AMAZON_SE	"lantiq,ase"
+#define COMP_AR9	"lantiq,ar9"
+#define COMP_GR9	"lantiq,gr9"
+#define COMP_VR9	"lantiq,vr9"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	sprintf(i->rev_type, "1.%d", i->rev);
+	switch (i->partnum) {
+	case SOC_ID_DANUBE1:
+	case SOC_ID_DANUBE2:
+		i->name = SOC_DANUBE;
+		i->type = SOC_TYPE_DANUBE;
+		i->compatible = COMP_DANUBE;
+		break;
+
+	case SOC_ID_TWINPASS:
+		i->name = SOC_TWINPASS;
+		i->type = SOC_TYPE_DANUBE;
+		i->compatible = COMP_TWINPASS;
+		break;
+
+	case SOC_ID_ARX188:
+	case SOC_ID_ARX168_1:
+	case SOC_ID_ARX168_2:
+	case SOC_ID_ARX182:
+		i->name = SOC_AR9;
+		i->type = SOC_TYPE_AR9;
+		i->compatible = COMP_AR9;
+		break;
+
+	case SOC_ID_GRX188:
+	case SOC_ID_GRX168:
+		i->name = SOC_GR9;
+		i->type = SOC_TYPE_AR9;
+		i->compatible = COMP_GR9;
+		break;
+
+	case SOC_ID_AMAZON_SE_1:
+	case SOC_ID_AMAZON_SE_2:
+#ifdef CONFIG_PCI
+		panic("ase is only supported for non pci kernels");
+#endif
+		i->name = SOC_AMAZON_SE;
+		i->type = SOC_TYPE_AMAZON_SE;
+		i->compatible = COMP_AMAZON_SE;
+		break;
+
+	case SOC_ID_VRX282:
+	case SOC_ID_VRX268:
+	case SOC_ID_VRX288:
+		i->name = SOC_VR9;
+		i->type = SOC_TYPE_VR9;
+		i->compatible = COMP_VR9;
+		break;
+
+	case SOC_ID_GRX268:
+	case SOC_ID_GRX288:
+		i->name = SOC_GR9;
+		i->type = SOC_TYPE_VR9;
+		i->compatible = COMP_GR9;
+		break;
+
+	case SOC_ID_VRX268_2:
+	case SOC_ID_VRX288_2:
+		i->name = SOC_VR9;
+		i->type = SOC_TYPE_VR9_2;
+		i->compatible = COMP_VR9;
+		break;
+
+	case SOC_ID_GRX282_2:
+	case SOC_ID_GRX288_2:
+		i->name = SOC_GR9;
+		i->type = SOC_TYPE_VR9_2;
+		i->compatible = COMP_GR9;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index 8b66bd8..22c55f7 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -11,26 +11,31 @@
 #include <linux/ioport.h>
 #include <linux/pm.h>
 #include <linux/export.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
 #include <asm/reboot.h>
 
 #include <lantiq_soc.h>
 
+#include "../prom.h"
+
 #define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
 #define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
 
-/* register definitions */
-#define LTQ_RCU_RST		0x0010
-#define LTQ_RCU_RST_ALL		0x40000000
-
-#define LTQ_RCU_RST_STAT	0x0014
-#define LTQ_RCU_STAT_SHIFT	26
+/* reset request register */
+#define RCU_RST_REQ		0x0010
+/* reset status register */
+#define RCU_RST_STAT		0x0014
 
-static struct resource ltq_rcu_resource = {
-	.name   = "rcu",
-	.start  = LTQ_RCU_BASE_ADDR,
-	.end    = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
-	.flags  = IORESOURCE_MEM,
-};
+/* reboot bit */
+#define RCU_RD_SRST		BIT(30)
+/* reset cause */
+#define RCU_STAT_SHIFT		26
+/* boot selection */
+#define RCU_BOOT_SEL_SHIFT	26
+#define RCU_BOOT_SEL_MASK	0x7
 
 /* remapped base addr of the reset control unit */
 static void __iomem *ltq_rcu_membase;
@@ -38,48 +43,64 @@ static void __iomem *ltq_rcu_membase;
 /* This function is used by the watchdog driver */
 int ltq_reset_cause(void)
 {
-	u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
-	return val >> LTQ_RCU_STAT_SHIFT;
+	u32 val = ltq_rcu_r32(RCU_RST_STAT);
+	return val >> RCU_STAT_SHIFT;
 }
 EXPORT_SYMBOL_GPL(ltq_reset_cause);
 
+/* allow platform code to find out what source we booted from */
+unsigned char ltq_boot_select(void)
+{
+	u32 val = ltq_rcu_r32(RCU_RST_STAT);
+	return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
+}
+
+/* reset a io domain for u micro seconds */
+void ltq_reset_once(unsigned int module, ulong u)
+{
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
+	udelay(u);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
+}
+
 static void ltq_machine_restart(char *command)
 {
-	pr_notice("System restart\n");
 	local_irq_disable();
-	ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
 	unreachable();
 }
 
 static void ltq_machine_halt(void)
 {
-	pr_notice("System halted.\n");
 	local_irq_disable();
 	unreachable();
 }
 
 static void ltq_machine_power_off(void)
 {
-	pr_notice("Please turn off the power now.\n");
 	local_irq_disable();
 	unreachable();
 }
 
 static int __init mips_reboot_setup(void)
 {
-	/* insert and request the memory region */
-	if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
-		panic("Failed to insert rcu memory");
+	struct resource res;
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
+
+	/* check if all the reset register range is available */
+	if (!np)
+		panic("Failed to load reset resources from devicetree");
+
+	if (of_address_to_resource(np, 0, &res))
+		panic("Failed to get rcu memory range");
 
-	if (request_mem_region(ltq_rcu_resource.start,
-			resource_size(&ltq_rcu_resource), "rcu") < 0)
-		panic("Failed to request rcu memory");
+	if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
+		pr_err("Failed to request rcu memory");
 
-	/* remap rcu register range */
-	ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
-				resource_size(&ltq_rcu_resource));
+	ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res));
 	if (!ltq_rcu_membase)
-		panic("Failed to remap rcu memory");
+		panic("Failed to remap core memory");
 
 	_machine_restart = ltq_machine_restart;
 	_machine_halt = ltq_machine_halt;
diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c
deleted file mode 100644
index f6f3267..0000000
--- a/arch/mips/lantiq/xway/setup-ase.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <lantiq_soc.h>
-
-#include "../prom.h"
-#include "devices.h"
-
-void __init ltq_soc_setup(void)
-{
-	ltq_register_ase_asc();
-	ltq_register_gpio();
-	ltq_register_wdt();
-}
diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c
deleted file mode 100644
index c292f64..0000000
--- a/arch/mips/lantiq/xway/setup-xway.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <lantiq_soc.h>
-
-#include "../prom.h"
-#include "devices.h"
-
-void __init ltq_soc_setup(void)
-{
-	ltq_register_asc(0);
-	ltq_register_asc(1);
-	ltq_register_gpio();
-	ltq_register_wdt();
-}
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
new file mode 100644
index 0000000..83780f7
--- /dev/null
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -0,0 +1,371 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011-2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <lantiq_soc.h>
+
+#include "../clk.h"
+#include "../prom.h"
+
+/* clock control register */
+#define CGU_IFCCR	0x0018
+/* system clock register */
+#define CGU_SYS		0x0010
+/* pci control register */
+#define CGU_PCICR	0x0034
+/* ephy configuration register */
+#define CGU_EPHY	0x10
+/* power control register */
+#define PMU_PWDCR	0x1C
+/* power status register */
+#define PMU_PWDSR	0x20
+/* power control register */
+#define PMU_PWDCR1	0x24
+/* power status register */
+#define PMU_PWDSR1	0x28
+/* power control register */
+#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR))
+/* power status register */
+#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
+
+/* clock gates that we can en/disable */
+#define PMU_USB0_P	BIT(0)
+#define PMU_PCI		BIT(4)
+#define PMU_DMA		BIT(5)
+#define PMU_USB0	BIT(6)
+#define PMU_ASC0	BIT(7)
+#define PMU_EPHY	BIT(7)	/* ase */
+#define PMU_SPI		BIT(8)
+#define PMU_DFE		BIT(9)
+#define PMU_EBU		BIT(10)
+#define PMU_STP		BIT(11)
+#define PMU_GPT		BIT(12)
+#define PMU_AHBS	BIT(13) /* vr9 */
+#define PMU_FPI		BIT(14)
+#define PMU_AHBM	BIT(15)
+#define PMU_ASC1	BIT(17)
+#define PMU_PPE_QSB	BIT(18)
+#define PMU_PPE_SLL01	BIT(19)
+#define PMU_PPE_TC	BIT(21)
+#define PMU_PPE_EMA	BIT(22)
+#define PMU_PPE_DPLUM	BIT(23)
+#define PMU_PPE_DPLUS	BIT(24)
+#define PMU_USB1_P	BIT(26)
+#define PMU_USB1	BIT(27)
+#define PMU_SWITCH	BIT(28)
+#define PMU_PPE_TOP	BIT(29)
+#define PMU_GPHY	BIT(30)
+#define PMU_PCIE_CLK	BIT(31)
+
+#define PMU1_PCIE_PHY	BIT(0)
+#define PMU1_PCIE_CTL	BIT(1)
+#define PMU1_PCIE_PDI	BIT(4)
+#define PMU1_PCIE_MSI	BIT(5)
+
+#define pmu_w32(x, y)	ltq_w32((x), pmu_membase + (y))
+#define pmu_r32(x)	ltq_r32(pmu_membase + (x))
+
+static void __iomem *pmu_membase;
+void __iomem *ltq_cgu_membase;
+void __iomem *ltq_ebu_membase;
+
+/* legacy function kept alive to ease clkdev transition */
+void ltq_pmu_enable(unsigned int module)
+{
+	int err = 1000000;
+
+	pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR);
+	do {} while (--err && (pmu_r32(PMU_PWDSR) & module));
+
+	if (!err)
+		panic("activating PMU module failed!");
+}
+EXPORT_SYMBOL(ltq_pmu_enable);
+
+/* legacy function kept alive to ease clkdev transition */
+void ltq_pmu_disable(unsigned int module)
+{
+	pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR);
+}
+EXPORT_SYMBOL(ltq_pmu_disable);
+
+/* enable a hw clock */
+static int cgu_enable(struct clk *clk)
+{
+	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR);
+	return 0;
+}
+
+/* disable a hw clock */
+static void cgu_disable(struct clk *clk)
+{
+	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR);
+}
+
+/* enable a clock gate */
+static int pmu_enable(struct clk *clk)
+{
+	int retry = 1000000;
+
+	pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
+		PWDCR(clk->module));
+	do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits));
+
+	if (!retry)
+		panic("activating PMU module failed!\n");
+
+	return 0;
+}
+
+/* disable a clock gate */
+static void pmu_disable(struct clk *clk)
+{
+	pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
+		PWDCR(clk->module));
+}
+
+/* the pci enable helper */
+static int pci_enable(struct clk *clk)
+{
+	unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
+	/* set bus clock speed */
+	if (of_machine_is_compatible("lantiq,ar9")) {
+		ifccr &= ~0x1f00000;
+		if (clk->rate == CLOCK_33M)
+			ifccr |= 0xe00000;
+		else
+			ifccr |= 0x700000; /* 62.5M */
+	} else {
+		ifccr &= ~0xf00000;
+		if (clk->rate == CLOCK_33M)
+			ifccr |= 0x800000;
+		else
+			ifccr |= 0x400000; /* 62.5M */
+	}
+	ltq_cgu_w32(ifccr, CGU_IFCCR);
+	pmu_enable(clk);
+	return 0;
+}
+
+/* enable the external clock as a source */
+static int pci_ext_enable(struct clk *clk)
+{
+	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16),
+		CGU_IFCCR);
+	ltq_cgu_w32((1 << 30), CGU_PCICR);
+	return 0;
+}
+
+/* disable the external clock as a source */
+static void pci_ext_disable(struct clk *clk)
+{
+	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
+		CGU_IFCCR);
+	ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
+}
+
+/* enable a clockout source */
+static int clkout_enable(struct clk *clk)
+{
+	int i;
+
+	/* get the correct rate */
+	for (i = 0; i < 4; i++) {
+		if (clk->rates[i] == clk->rate) {
+			int shift = 14 - (2 * clk->module);
+			unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
+
+			ifccr &= ~(3 << shift);
+			ifccr |= i << shift;
+			ltq_cgu_w32(ifccr, CGU_IFCCR);
+			return 0;
+		}
+	}
+	return -1;
+}
+
+/* manage the clock gates via PMU */
+static void clkdev_add_pmu(const char *dev, const char *con,
+					unsigned int module, unsigned int bits)
+{
+	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	clk->cl.dev_id = dev;
+	clk->cl.con_id = con;
+	clk->cl.clk = clk;
+	clk->enable = pmu_enable;
+	clk->disable = pmu_disable;
+	clk->module = module;
+	clk->bits = bits;
+	clkdev_add(&clk->cl);
+}
+
+/* manage the clock generator */
+static void clkdev_add_cgu(const char *dev, const char *con,
+					unsigned int bits)
+{
+	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	clk->cl.dev_id = dev;
+	clk->cl.con_id = con;
+	clk->cl.clk = clk;
+	clk->enable = cgu_enable;
+	clk->disable = cgu_disable;
+	clk->bits = bits;
+	clkdev_add(&clk->cl);
+}
+
+/* pci needs its own enable function as the setup is a bit more complex */
+static unsigned long valid_pci_rates[] = {CLOCK_33M, CLOCK_62_5M, 0};
+
+static void clkdev_add_pci(void)
+{
+	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+	struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	/* main pci clock */
+	clk->cl.dev_id = "17000000.pci";
+	clk->cl.con_id = NULL;
+	clk->cl.clk = clk;
+	clk->rate = CLOCK_33M;
+	clk->rates = valid_pci_rates;
+	clk->enable = pci_enable;
+	clk->disable = pmu_disable;
+	clk->module = 0;
+	clk->bits = PMU_PCI;
+	clkdev_add(&clk->cl);
+
+	/* use internal/external bus clock */
+	clk_ext->cl.dev_id = "17000000.pci";
+	clk_ext->cl.con_id = "external";
+	clk_ext->cl.clk = clk_ext;
+	clk_ext->enable = pci_ext_enable;
+	clk_ext->disable = pci_ext_disable;
+	clkdev_add(&clk_ext->cl);
+}
+
+/* xway socs can generate clocks on gpio pins */
+static unsigned long valid_clkout_rates[4][5] = {
+	{CLOCK_32_768K, CLOCK_1_536M, CLOCK_2_5M, CLOCK_12M, 0},
+	{CLOCK_40M, CLOCK_12M, CLOCK_24M, CLOCK_48M, 0},
+	{CLOCK_25M, CLOCK_40M, CLOCK_30M, CLOCK_60M, 0},
+	{CLOCK_12M, CLOCK_50M, CLOCK_32_768K, CLOCK_25M, 0},
+};
+
+static void clkdev_add_clkout(void)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		struct clk *clk;
+		char *name;
+
+		name = kzalloc(sizeof("clkout0"), GFP_KERNEL);
+		sprintf(name, "clkout%d", i);
+
+		clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+		clk->cl.dev_id = "1f103000.cgu";
+		clk->cl.con_id = name;
+		clk->cl.clk = clk;
+		clk->rate = 0;
+		clk->rates = valid_clkout_rates[i];
+		clk->enable = clkout_enable;
+		clk->module = i;
+		clkdev_add(&clk->cl);
+	}
+}
+
+/* bring up all register ranges that we need for basic system control */
+void __init ltq_soc_init(void)
+{
+	struct resource res_pmu, res_cgu, res_ebu;
+	struct device_node *np_pmu =
+			of_find_compatible_node(NULL, NULL, "lantiq,pmu-xway");
+	struct device_node *np_cgu =
+			of_find_compatible_node(NULL, NULL, "lantiq,cgu-xway");
+	struct device_node *np_ebu =
+			of_find_compatible_node(NULL, NULL, "lantiq,ebu-xway");
+
+	/* check if all the core register ranges are available */
+	if (!np_pmu || !np_cgu || !np_ebu)
+		panic("Failed to load core nodess from devicetree");
+
+	if (of_address_to_resource(np_pmu, 0, &res_pmu) ||
+			of_address_to_resource(np_cgu, 0, &res_cgu) ||
+			of_address_to_resource(np_ebu, 0, &res_ebu))
+		panic("Failed to get core resources");
+
+	if ((request_mem_region(res_pmu.start, resource_size(&res_pmu),
+				res_pmu.name) < 0) ||
+		(request_mem_region(res_cgu.start, resource_size(&res_cgu),
+				res_cgu.name) < 0) ||
+		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
+				res_ebu.name) < 0))
+		pr_err("Failed to request core reources");
+
+	pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu));
+	ltq_cgu_membase = ioremap_nocache(res_cgu.start,
+						resource_size(&res_cgu));
+	ltq_ebu_membase = ioremap_nocache(res_ebu.start,
+						resource_size(&res_ebu));
+	if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase)
+		panic("Failed to remap core resources");
+
+	/* make sure to unprotect the memory region where flash is located */
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+
+	/* add our generic xway clocks */
+	clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI);
+	clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0);
+	clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT);
+	clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP);
+	clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA);
+	clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI);
+	clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU);
+	clkdev_add_clkout();
+
+	/* add the soc dependent clocks */
+	if (!of_machine_is_compatible("lantiq,vr9"))
+		clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE);
+
+	if (!of_machine_is_compatible("lantiq,ase")) {
+		clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1);
+		clkdev_add_pci();
+	}
+
+	if (of_machine_is_compatible("lantiq,ase")) {
+		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
+			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+		else
+			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
+		clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
+	} else if (of_machine_is_compatible("lantiq,vr9")) {
+		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
+				ltq_vr9_fpi_hz());
+		clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
+		clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
+		clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
+		clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL);
+		clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
+	} else if (of_machine_is_compatible("lantiq,ar9")) {
+		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
+				ltq_ar9_fpi_hz());
+		clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
+	} else {
+		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+				ltq_danube_fpi_hz());
+	}
+}