Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

1 files changed, 14 insertions, 6 deletions

diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
index 547f34b..c41e4ca 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson1/common/reset.c
@@ -14,12 +14,7 @@
 
 #include <loongson1.h>
 
-static void ls1x_restart(char *command)
-{
-	__raw_writel(0x1, LS1X_WDT_EN);
-	__raw_writel(0x5000000, LS1X_WDT_TIMER);
-	__raw_writel(0x1, LS1X_WDT_SET);
-}
+static void __iomem *wdt_base;
 
 static void ls1x_halt(void)
 {
@@ -29,6 +24,15 @@ static void ls1x_halt(void)
 	}
 }
 
+static void ls1x_restart(char *command)
+{
+	__raw_writel(0x1, wdt_base + WDT_EN);
+	__raw_writel(0x1, wdt_base + WDT_TIMER);
+	__raw_writel(0x1, wdt_base + WDT_SET);
+
+	ls1x_halt();
+}
+
 static void ls1x_power_off(void)
 {
 	ls1x_halt();
@@ -36,6 +40,10 @@ static void ls1x_power_off(void)
 
 static int __init ls1x_reboot_setup(void)
 {
+	wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
+	if (!wdt_base)
+		panic("Failed to remap watchdog registers");
+
 	_machine_restart = ls1x_restart;
 	_machine_halt = ls1x_halt;
 	pm_power_off = ls1x_power_off;