MIPS: MSP71xx: Remove checks for two macros

Since v2.6.39 there are checks for CONFIG_MSP_HAS_DUAL_USB and checks
for CONFIG_MSP_HAS_TSMAC in the code. The related Kconfig symbols have
never been added. These checks have evaluated to false for three years
now. Remove them and the code they have been hiding.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6982/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 90 deletions

diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c
index 4dab915..c87c5f8 100644
--- a/arch/mips/pmcs-msp71xx/msp_usb.c
+++ b/arch/mips/pmcs-msp71xx/msp_usb.c
@@ -75,47 +75,6 @@ static struct mspusb_device msp_usbhost0_device = {
 		.resource	= msp_usbhost0_resources,
 	},
 };
-
-/* MSP7140/MSP82XX has two USB2 hosts. */
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-static u64 msp_usbhost1_dma_mask = 0xffffffffUL;
-
-static struct resource msp_usbhost1_resources[] = {
-	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start	= MSP_USB1_HS_START,
-		.end	= MSP_USB1_HS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSP_INT_USB,
-		.end	= MSP_INT_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = { /* MSBus-to-AMBA bridge register space */
-		.start	= MSP_USB1_MAB_START,
-		.end	= MSP_USB1_MAB_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = { /* Identification and general hardware parameters */
-		.start	= MSP_USB1_ID_START,
-		.end	= MSP_USB1_ID_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mspusb_device msp_usbhost1_device = {
-	.dev	= {
-		.name	= "pmcmsp-ehci",
-		.id	= 1,
-		.dev	= {
-			.dma_mask = &msp_usbhost1_dma_mask,
-			.coherent_dma_mask = 0xffffffffUL,
-		},
-		.num_resources	= ARRAY_SIZE(msp_usbhost1_resources),
-		.resource	= msp_usbhost1_resources,
-	},
-};
-#endif /* CONFIG_MSP_HAS_DUAL_USB */
 #endif /* CONFIG_USB_EHCI_HCD */
 
 #if defined(CONFIG_USB_GADGET)
@@ -157,46 +116,6 @@ static struct mspusb_device msp_usbdev0_device = {
 		.resource	= msp_usbdev0_resources,
 	},
 };
-
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-static struct resource msp_usbdev1_resources[] = {
-	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start	= MSP_USB1_HS_START,
-		.end	= MSP_USB1_HS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSP_INT_USB,
-		.end	= MSP_INT_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = { /* MSBus-to-AMBA bridge register space */
-		.start	= MSP_USB1_MAB_START,
-		.end	= MSP_USB1_MAB_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = { /* Identification and general hardware parameters */
-		.start	= MSP_USB1_ID_START,
-		.end	= MSP_USB1_ID_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* This may need to be converted to a mspusb_device, too. */
-static struct mspusb_device msp_usbdev1_device = {
-	.dev	= {
-		.name	= "msp71xx_udc",
-		.id	= 0,
-		.dev	= {
-			.dma_mask = &msp_usbdev_dma_mask,
-			.coherent_dma_mask = 0xffffffffUL,
-		},
-		.num_resources	= ARRAY_SIZE(msp_usbdev1_resources),
-		.resource	= msp_usbdev1_resources,
-	},
-};
-
-#endif /* CONFIG_MSP_HAS_DUAL_USB */
 #endif /* CONFIG_USB_GADGET */
 
 static int __init msp_usb_setup(void)
@@ -231,10 +150,6 @@ static int __init msp_usb_setup(void)
 #if defined(CONFIG_USB_EHCI_HCD)
 		msp_devs[0] = &msp_usbhost0_device.dev;
 		ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-		msp_devs[1] = &msp_usbhost1_device.dev;
-		ppfinit("platform add USB HOST done %s.\n", msp_devs[1]->name);
-#endif
 #else
 		ppfinit("%s: echi_hcd not supported\n", __FILE__);
 #endif	/* CONFIG_USB_EHCI_HCD */
@@ -244,11 +159,6 @@ static int __init msp_usb_setup(void)
 		msp_devs[0] = &msp_usbdev0_device.dev;
 		ppfinit("platform add USB DEVICE done %s.\n"
 					, msp_devs[0]->name);
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-		msp_devs[1] = &msp_usbdev1_device.dev;
-		ppfinit("platform add USB DEVICE done %s.\n"
-					, msp_devs[1]->name);
-#endif
 #else
 		ppfinit("%s: usb_gadget not supported\n", __FILE__);
 #endif	/* CONFIG_USB_GADGET */