Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

1 files changed, 28 insertions, 12 deletions

diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index ee3617c..b369509 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -50,13 +50,17 @@ quiet_cmd_vdsold = VDSO    $@
       cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \
                    -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
 
+# Strip rule for the raw .so files
+$(obj)/%.so.raw: OBJCOPYFLAGS := -S
+$(obj)/%.so.raw: $(obj)/%.so.dbg.raw FORCE
+	$(call if_changed,objcopy)
+
 hostprogs-y := genvdso
 
 quiet_cmd_genvdso = GENVDSO $@
 define cmd_genvdso
-	cp $< $(<:%.dbg=%) && \
-	$(OBJCOPY) -S $< $(<:%.dbg=%) && \
-	$(obj)/genvdso $< $(<:%.dbg=%) $@ $(VDSO_NAME)
+	$(foreach file,$(filter %.raw,$^),cp $(file) $(file:%.raw=%) &&) \
+	$(obj)/genvdso $(<:%.raw=%) $(<:%.dbg.raw=%) $@ $(VDSO_NAME)
 endef
 
 #
@@ -66,7 +70,10 @@ endef
 native-abi := $(filter -mabi=%,$(KBUILD_CFLAGS))
 
 targets += $(obj-vdso-y)
-targets += vdso.lds vdso.so.dbg vdso.so vdso-image.c
+targets += vdso.lds
+targets += vdso.so.dbg.raw vdso.so.raw
+targets += vdso.so.dbg vdso.so
+targets += vdso-image.c
 
 obj-vdso := $(obj-vdso-y:%.o=$(obj)/%.o)
 
@@ -75,10 +82,11 @@ $(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi)
 
 $(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
 
-$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
+$(obj)/vdso.so.dbg.raw: $(obj)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
 
-$(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE
+$(obj)/vdso-image.c: $(obj)/vdso.so.dbg.raw $(obj)/vdso.so.raw \
+                     $(obj)/genvdso FORCE
 	$(call if_changed,genvdso)
 
 obj-y += vdso-image.o
@@ -89,7 +97,10 @@ obj-y += vdso-image.o
 
 # Define these outside the ifdef to ensure they are picked up by clean.
 targets += $(obj-vdso-y:%.o=%-o32.o)
-targets += vdso-o32.lds vdso-o32.so.dbg vdso-o32.so vdso-o32-image.c
+targets += vdso-o32.lds
+targets += vdso-o32.so.dbg.raw vdso-o32.so.raw
+targets += vdso-o32.so.dbg vdso-o32.so
+targets += vdso-o32-image.c
 
 ifdef CONFIG_MIPS32_O32
 
@@ -109,11 +120,12 @@ $(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32
 $(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
 	$(call if_changed_dep,cpp_lds_S)
 
-$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE
+$(obj)/vdso-o32.so.dbg.raw: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE
 	$(call if_changed,vdsold)
 
 $(obj)/vdso-o32-image.c: VDSO_NAME := o32
-$(obj)/vdso-o32-image.c: $(obj)/vdso-o32.so.dbg $(obj)/genvdso FORCE
+$(obj)/vdso-o32-image.c: $(obj)/vdso-o32.so.dbg.raw $(obj)/vdso-o32.so.raw \
+                         $(obj)/genvdso FORCE
 	$(call if_changed,genvdso)
 
 obj-y += vdso-o32-image.o
@@ -125,7 +137,10 @@ endif
 #
 
 targets += $(obj-vdso-y:%.o=%-n32.o)
-targets += vdso-n32.lds vdso-n32.so.dbg vdso-n32.so vdso-n32-image.c
+targets += vdso-n32.lds
+targets += vdso-n32.so.dbg.raw vdso-n32.so.raw
+targets += vdso-n32.so.dbg vdso-n32.so
+targets += vdso-n32-image.c
 
 ifdef CONFIG_MIPS32_N32
 
@@ -145,11 +160,12 @@ $(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32
 $(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
 	$(call if_changed_dep,cpp_lds_S)
 
-$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE
+$(obj)/vdso-n32.so.dbg.raw: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE
 	$(call if_changed,vdsold)
 
 $(obj)/vdso-n32-image.c: VDSO_NAME := n32
-$(obj)/vdso-n32-image.c: $(obj)/vdso-n32.so.dbg $(obj)/genvdso FORCE
+$(obj)/vdso-n32-image.c: $(obj)/vdso-n32.so.dbg.raw $(obj)/vdso-n32.so.raw \
+                         $(obj)/genvdso FORCE
 	$(call if_changed,genvdso)
 
 obj-y += vdso-n32-image.o