MIPS: NXP: Remove unused source files.

The NXP code was moved for 2.6.36 but two files survived unused in the
old location.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 0 insertions, 277 deletions

diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
deleted file mode 100644
index 98e86dd..0000000
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
-	.start	= PNX8550_PCIIO + 0x1000,	/* reserve regacy I/O space */
-	.end	= PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
-	.name	= "pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PNX8550_PCIMEM,
-	.end	= PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
-	.name	= "pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
-	.pci_ops	= &pnx8550_pci_ops,
-	.io_map_base	= PNX8550_PORT_BASE,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
-	int pci_mem_code;
-	int mem_size = get_system_mem_size() >> 20;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* Calc the PCI mem size code */
-	if (mem_size >= 128)
-		pci_mem_code = SIZE_128M;
-	else if (mem_size >= 64)
-		pci_mem_code = SIZE_64M;
-	else if (mem_size >= 32)
-		pci_mem_code = SIZE_32M;
-	else
-		pci_mem_code = SIZE_16M;
-
-	/* Set PCI_XIO registers */
-	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
-	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
-	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
-	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
-	/* Send memory transaction via PCI_BASE2 */
-	outl(0x00000001, PCI_BASE | PCI_IO);
-
-	/* Unlock the setup register */
-	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
-	/*
-	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
-	 * to work, and in order for bus_to_baddr to work without any
-	 * hacks.
-	 */
-	outl(0x00000000, PCI_BASE | PCI_BASE10);
-
-	/*
-	 *These two bars are set by default or the boot code.
-	 * However, it's safer to set them here so we're not boot
-	 * code dependent.
-	 */
-	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
-	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
-
-	outl(PCI_EN_TA |
-	     PCI_EN_PCI2MMI |
-	     PCI_EN_XIO |
-	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
-	     PCI_SETUP_BASE18_EN |
-	     PCI_SETUP_BASE14_EN |
-	     PCI_SETUP_BASE10_PREF |
-	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
-	     PCI_SETUP_CFGMANAGE_EN |
-	     PCI_SETUP_PCIARB_EN,
-	     PCI_BASE |
-	     PCI_SETUP);	/* PCI_SETUP */
-	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
-
-	register_pci_controller(&pnx8550_controller);
-
-	return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
deleted file mode 100644
index 71adac3..0000000
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- *  Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	},
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	char* argptr;
-
-	board_setup();  /* board specific setup */
-
-        _machine_restart = pnx8550_machine_restart;
-        _machine_halt = pnx8550_machine_halt;
-        pm_power_off = pnx8550_machine_power_off;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* IO/MEM resources. */
-	set_io_port_base(PNX8550_PORT_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = ~0;
-	iomem_resource.start = 0;
-	iomem_resource.end = ~0;
-
-	/* Request I/O space for devices on this board */
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, standard_io_resources + i);
-
-	/* Place the Mode Control bit for GPIO pin 16 in primary function */
-	/* Pin 16 is used by UART1, UA1_TX                                */
-	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
-			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
-			PNX8550_GPIO_MC1);
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
-		argptr += strlen("console=ttyS");
-		pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
-		/* We must initialize the UART (console) before early printk */
-		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
-		ip3106_lcr(UART_BASE, pnx8550_console_port) =
-			PNX8XXX_UART_LCR_8BIT;
-		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
-	}
-}