[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.

This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.

The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e.  the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.

The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.

I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 56 insertions, 53 deletions

diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 79983d7..f81d735 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -8,6 +8,9 @@
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version.
  */
+
+/dts-v1/;
+
 / {
 	model = "MPC8349EMITXGP";
 	compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
@@ -27,11 +30,11 @@
 
 		PowerPC,8349@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;
-			i-cache-line-size = <20>;
-			d-cache-size = <8000>;
-			i-cache-size = <8000>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
 			timebase-frequency = <0>;	// from bootloader
 			bus-frequency = <0>;		// from bootloader
 			clock-frequency = <0>;		// from bootloader
@@ -40,21 +43,21 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 10000000>;
+		reg = <0x00000000 0x10000000>;
 	};
 
 	soc8349@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00000200>;
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
 
 		wdt@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
-			reg = <200 100>;
+			reg = <0x200 0x100>;
 		};
 
 		i2c@3000 {
@@ -62,9 +65,9 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <e 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
@@ -73,28 +76,28 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <f 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
 		spi@7000 {
 			cell-index = <0>;
 			compatible = "fsl,spi";
-			reg = <7000 1000>;
-			interrupts = <10 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
 			mode = "cpu";
 		};
 
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
-			reg = <23000 1000>;
+			reg = <0x23000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = < &ipic >;
-			interrupts = <26 8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
 		};
@@ -103,13 +106,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			/* Vitesse 8201 */
 			phy1c: ethernet-phy@1c {
-				interrupt-parent = < &ipic >;
-				interrupts = <12 8>;
-				reg = <1c>;
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x1c>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -119,11 +122,11 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <20 8 21 8 22 8>;
-			interrupt-parent = < &ipic >;
-			phy-handle = < &phy1c >;
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy1c>;
 			linux,network-index = <0>;
 		};
 
@@ -131,63 +134,63 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;		// from bootloader
-			interrupts = <9 8>;
-			interrupt-parent = < &ipic >;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
 		};
 
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;		// from bootloader
-			interrupts = <a 8>;
-			interrupt-parent = < &ipic >;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
 		};
 
 		crypto@30000 {
 			device_type = "crypto";
 			model = "SEC2";
 			compatible = "talitos";
-			reg = <30000 10000>;
-			interrupts = <b 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
 			num-channels = <4>;
-			channel-fifo-len = <18>;
-			exec-units-mask = <0000007e>;
-			descriptor-types-mask = <01010ebf>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <700 100>;
+			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
 	};
 
 	pci0: pci@e0008600 {
 		cell-index = <2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x0F - PCI Slot */
-				7800 0 0 1 &ipic 14 8 /* PCI_INTA */
-				7800 0 0 2 &ipic 15 8 /* PCI_INTB */
+				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
+				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
 				 >;
-		interrupt-parent = < &ipic >;
-		interrupts = <43 8>;
-		bus-range = <1 1>;
-		ranges = <42000000 0 a0000000 a0000000 0 10000000
-			  02000000 0 b0000000 b0000000 0 10000000
-			  01000000 0 00000000 e3000000 0 01000000>;
-		clock-frequency = <3f940aa>;
+		interrupt-parent = <&ipic>;
+		interrupts = <67 0x8>;
+		bus-range = <0x1 0x1>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008600 100>;
+		reg = <0xe0008600 0x100>;
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};