powerpc, of_serial: Endianness issues setting up the serial ports

The speed and clock of the serial ports is retrieved from the device
tree in both the PowerPC legacy serial code and the Open Firmware serial
driver, therefore they need to handle the fact that the device tree is
always big endian, while the CPU may not be.

Also fix other device tree references in the legacy serial code.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 11 insertions, 11 deletions

diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index c1fd0f9..c834757 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -52,14 +52,14 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 				  phys_addr_t taddr, unsigned long irq,
 				  upf_t flags, int irq_check_parent)
 {
-	const u32 *clk, *spd;
+	const __be32 *clk, *spd;
 	u32 clock = BASE_BAUD * 16;
 	int index;
 
 	/* get clock freq. if present */
 	clk = of_get_property(np, "clock-frequency", NULL);
 	if (clk && *clk)
-		clock = *clk;
+		clock = be32_to_cpup(clk);
 
 	/* get default speed if present */
 	spd = of_get_property(np, "current-speed", NULL);
@@ -109,7 +109,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 	legacy_serial_infos[index].taddr = taddr;
 	legacy_serial_infos[index].np = of_node_get(np);
 	legacy_serial_infos[index].clock = clock;
-	legacy_serial_infos[index].speed = spd ? *spd : 0;
+	legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
 	legacy_serial_infos[index].irq_check_parent = irq_check_parent;
 
 	printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
@@ -168,7 +168,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
 static int __init add_legacy_isa_port(struct device_node *np,
 				      struct device_node *isa_brg)
 {
-	const u32 *reg;
+	const __be32 *reg;
 	const char *typep;
 	int index = -1;
 	u64 taddr;
@@ -181,7 +181,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 		return -1;
 
 	/* Verify it's an IO port, we don't support anything else */
-	if (!(reg[0] & 0x00000001))
+	if (!(be32_to_cpu(reg[0]) & 0x00000001))
 		return -1;
 
 	/* Now look for an "ibm,aix-loc" property that gives us ordering
@@ -202,7 +202,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 		taddr = 0;
 
 	/* Add port, irq will be dealt with later */
-	return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr,
+	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), taddr,
 			       NO_IRQ, UPF_BOOT_AUTOCONF, 0);
 
 }
@@ -251,9 +251,9 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	 * we get to their "reg" property
 	 */
 	if (np != pci_dev) {
-		const u32 *reg = of_get_property(np, "reg", NULL);
-		if (reg && (*reg < 4))
-			index = lindex = *reg;
+		const __be32 *reg = of_get_property(np, "reg", NULL);
+		if (reg && (be32_to_cpup(reg) < 4))
+			index = lindex = be32_to_cpup(reg);
 	}
 
 	/* Local index means it's the Nth port in the PCI chip. Unfortunately
@@ -507,7 +507,7 @@ static int __init check_legacy_serial_console(void)
 	struct device_node *prom_stdout = NULL;
 	int i, speed = 0, offset = 0;
 	const char *name;
-	const u32 *spd;
+	const __be32 *spd;
 
 	DBG(" -> check_legacy_serial_console()\n");
 
@@ -547,7 +547,7 @@ static int __init check_legacy_serial_console(void)
 	}
 	spd = of_get_property(prom_stdout, "current-speed", NULL);
 	if (spd)
-		speed = *spd;
+		speed = be32_to_cpup(spd);
 
 	if (strcmp(name, "serial") != 0)
 		goto not_found;