Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

Freescale updates from Scott:

"Highlights include 8xx optimizations, 32-bit checksum optimizations,
86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt
bits, and minor fixes/cleanup."

10 files changed, 269 insertions, 244 deletions

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 10d5eab..0d0183d 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -376,6 +376,7 @@ int main(void)
 	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
 	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
 	DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
+	DEFINE(CPU_DOWN_FLUSH, offsetof(struct cpu_spec, cpu_down_flush));
 
 	DEFINE(pbe_address, offsetof(struct pbe, address));
 	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index dddba3e..462aed9 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -13,11 +13,13 @@
  *
  */
 
+#include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 #include <asm/mmu-book3e.h>
 #include <asm/asm-offsets.h>
+#include <asm/mpc85xx.h>
 
 _GLOBAL(__e500_icache_setup)
 	mfspr	r0, SPRN_L1CSR1
@@ -233,3 +235,113 @@ _GLOBAL(__setup_cpu_e5500)
 	mtlr	r5
 	blr
 #endif
+
+/* flush L1 date cache, it can apply to e500v2, e500mc and e5500 */
+_GLOBAL(flush_dcache_L1)
+	mfmsr	r10
+	wrteei	0
+
+	mfspr	r3,SPRN_L1CFG0
+	rlwinm	r5,r3,9,3	/* Extract cache block size */
+	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
+				 * are currently defined.
+				 */
+	li	r4,32
+	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
+				 *      log2(number of ways)
+				 */
+	slw	r5,r4,r5	/* r5 = cache block size */
+
+	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
+	mulli	r7,r7,13	/* An 8-way cache will require 13
+				 * loads per set.
+				 */
+	slw	r7,r7,r6
+
+	/* save off HID0 and set DCFA */
+	mfspr	r8,SPRN_HID0
+	ori	r9,r8,HID0_DCFA@l
+	mtspr	SPRN_HID0,r9
+	isync
+
+	LOAD_REG_IMMEDIATE(r6, KERNELBASE)
+	mr	r4, r6
+	mtctr	r7
+
+1:	lwz	r3,0(r4)	/* Load... */
+	add	r4,r4,r5
+	bdnz	1b
+
+	msync
+	mr	r4, r6
+	mtctr	r7
+
+1:	dcbf	0,r4		/* ...and flush. */
+	add	r4,r4,r5
+	bdnz	1b
+
+	/* restore HID0 */
+	mtspr	SPRN_HID0,r8
+	isync
+
+	wrtee r10
+
+	blr
+
+has_L2_cache:
+	/* skip L2 cache on P2040/P2040E as they have no L2 cache */
+	mfspr	r3, SPRN_SVR
+	/* shift right by 8 bits and clear E bit of SVR */
+	rlwinm	r4, r3, 24, ~0x800
+
+	lis	r3, SVR_P2040@h
+	ori	r3, r3, SVR_P2040@l
+	cmpw	r4, r3
+	beq	1f
+
+	li	r3, 1
+	blr
+1:
+	li	r3, 0
+	blr
+
+/* flush backside L2 cache */
+flush_backside_L2_cache:
+	mflr	r10
+	bl	has_L2_cache
+	mtlr	r10
+	cmpwi	r3, 0
+	beq	2f
+
+	/* Flush the L2 cache */
+	mfspr	r3, SPRN_L2CSR0
+	ori	r3, r3, L2CSR0_L2FL@l
+	msync
+	isync
+	mtspr	SPRN_L2CSR0,r3
+	isync
+
+	/* check if it is complete */
+1:	mfspr	r3,SPRN_L2CSR0
+	andi.	r3, r3, L2CSR0_L2FL@l
+	bne	1b
+2:
+	blr
+
+_GLOBAL(cpu_down_flush_e500v2)
+	mflr r0
+	bl	flush_dcache_L1
+	mtlr r0
+	blr
+
+_GLOBAL(cpu_down_flush_e500mc)
+_GLOBAL(cpu_down_flush_e5500)
+	mflr r0
+	bl	flush_dcache_L1
+	bl	flush_backside_L2_cache
+	mtlr r0
+	blr
+
+/* L1 Data Cache of e6500 contains no modified data, no flush is required */
+_GLOBAL(cpu_down_flush_e6500)
+	blr
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index be4d730..6c662b8 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2050,6 +2050,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_e500v2,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
+		.cpu_down_flush		= cpu_down_flush_e500v2,
 	},
 #else
 	{	/* e500mc */
@@ -2069,6 +2070,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_e500mc,
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
+		.cpu_down_flush		= cpu_down_flush_e500mc,
 	},
 #endif /* CONFIG_PPC_E500MC */
 #endif /* CONFIG_PPC32 */
@@ -2093,6 +2095,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 #endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce5500",
+		.cpu_down_flush		= cpu_down_flush_e5500,
 	},
 	{	/* e6500 */
 		.pvr_mask		= 0xffff0000,
@@ -2115,6 +2118,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 #endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce6500",
+		.cpu_down_flush		= cpu_down_flush_e6500,
 	},
 #endif /* CONFIG_PPC_E500MC */
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 1b77956..2916283 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -40,6 +40,7 @@
 #include <asm/kvm_book3s_asm.h>
 #include <asm/ptrace.h>
 #include <asm/hw_irq.h>
+#include <asm/cputhreads.h>
 
 /* The physical memory is laid out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -181,6 +182,64 @@ exception_marker:
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E
+/*
+ * The booting_thread_hwid holds the thread id we want to boot in cpu
+ * hotplug case. It is set by cpu hotplug code, and is invalid by default.
+ * The thread id is the same as the initial value of SPRN_PIR[THREAD_ID]
+ * bit field.
+ */
+	.globl	booting_thread_hwid
+booting_thread_hwid:
+	.long  INVALID_THREAD_HWID
+	.align 3
+/*
+ * start a thread in the same core
+ * input parameters:
+ * r3 = the thread physical id
+ * r4 = the entry point where thread starts
+ */
+_GLOBAL(book3e_start_thread)
+	LOAD_REG_IMMEDIATE(r5, MSR_KERNEL)
+	cmpi	0, r3, 0
+	beq	10f
+	cmpi	0, r3, 1
+	beq	11f
+	/* If the thread id is invalid, just exit. */
+	b	13f
+10:
+	mttmr	TMRN_IMSR0, r5
+	mttmr	TMRN_INIA0, r4
+	b	12f
+11:
+	mttmr	TMRN_IMSR1, r5
+	mttmr	TMRN_INIA1, r4
+12:
+	isync
+	li	r6, 1
+	sld	r6, r6, r3
+	mtspr	SPRN_TENS, r6
+13:
+	blr
+
+/*
+ * stop a thread in the same core
+ * input parameter:
+ * r3 = the thread physical id
+ */
+_GLOBAL(book3e_stop_thread)
+	cmpi	0, r3, 0
+	beq	10f
+	cmpi	0, r3, 1
+	beq	10f
+	/* If the thread id is invalid, just exit. */
+	b	13f
+10:
+	li	r4, 1
+	sld	r4, r4, r3
+	mtspr	SPRN_TENC, r4
+13:
+	blr
+
 _GLOBAL(fsl_secondary_thread_init)
 	mfspr	r4,SPRN_BUCSR
 
@@ -261,6 +320,44 @@ _GLOBAL(generic_secondary_smp_init)
 	mr	r3,r24
 	mr	r4,r25
 	bl	book3e_secondary_core_init
+
+/*
+ * After common core init has finished, check if the current thread is the
+ * one we wanted to boot. If not, start the specified thread and stop the
+ * current thread.
+ */
+	LOAD_REG_ADDR(r4, booting_thread_hwid)
+	lwz     r3, 0(r4)
+	li	r5, INVALID_THREAD_HWID
+	cmpw	r3, r5
+	beq	20f
+
+	/*
+	 * The value of booting_thread_hwid has been stored in r3,
+	 * so make it invalid.
+	 */
+	stw	r5, 0(r4)
+
+	/*
+	 * Get the current thread id and check if it is the one we wanted.
+	 * If not, start the one specified in booting_thread_hwid and stop
+	 * the current thread.
+	 */
+	mfspr	r8, SPRN_TIR
+	cmpw	r3, r8
+	beq	20f
+
+	/* start the specified thread */
+	LOAD_REG_ADDR(r5, fsl_secondary_thread_init)
+	ld	r4, 0(r5)
+	bl	book3e_start_thread
+
+	/* stop the current thread */
+	mr	r3, r8
+	bl	book3e_stop_thread
+10:
+	b	10b
+20:
 #endif
 
 generic_secondary_common_init:
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 78c1eba..80c6947 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -329,7 +329,7 @@ InstructionTLBMiss:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined (CONFIG_DEBUG_PAGEALLOC)
 	/* Only modules will cause ITLB Misses as we always
 	 * pin the first 8MB of kernel memory */
 	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
@@ -385,27 +385,26 @@ InstructionTLBMiss:
 
 	. = 0x1200
 DataStoreTLBMiss:
-#ifdef CONFIG_8xx_CPU6
 	mtspr	SPRN_SPRG_SCRATCH2, r3
-#endif
 	EXCEPTION_PROLOG_0
-	mfcr	r10
+	mfcr	r3
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	mfspr	r11, SPRN_MD_EPN
-	IS_KERNEL(r11, r11)
+	mfspr	r10, SPRN_MD_EPN
+	IS_KERNEL(r11, r10)
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 	BRANCH_UNLESS_KERNEL(3f)
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
-	mtcr	r10
-	mfspr	r10, SPRN_MD_EPN
 
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	mtcr	r11
+	bt-	28,DTLBMiss8M		/* bit 28 = Large page (8M) */
+	mtcr	r3
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -453,13 +452,34 @@ DataStoreTLBMiss:
 	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
-#ifdef CONFIG_8xx_CPU6
 	mfspr	r3, SPRN_SPRG_SCRATCH2
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	EXCEPTION_EPILOG_0
+	rfi
+
+DTLBMiss8M:
+	mtcr	r3
+	ori	r11, r11, MD_SVALID
+	MTSPR_CPU6(SPRN_MD_TWC, r11, r3)
+#ifdef CONFIG_PPC_16K_PAGES
+	/*
+	 * In 16k pages mode, each PGD entry defines a 64M block.
+	 * Here we select the 8M page within the block.
+	 */
+	rlwimi	r11, r10, 0, 0x03800000
 #endif
+	rlwinm	r10, r11, 0, 0xff800000
+	ori	r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY	| \
+			  _PAGE_PRESENT
+	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
+
+	li	r11, RPN_PATTERN
+	mfspr	r3, SPRN_SPRG_SCRATCH2
 	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	EXCEPTION_EPILOG_0
 	rfi
 
+
 /* This is an instruction TLB error on the MPC8xx.  This could be due
  * to many reasons, such as executing guarded memory or illegal instruction
  * addresses.  There is nothing to do but handle a big time error fault.
@@ -537,13 +557,15 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	/* Insert level 1 index */
 3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	mtcr	r11
+	bt	28,200f		/* bit 28 = Large page (8M) */
 	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Insert level 2 index */
 	rlwimi	r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	lwz	r11, 0(r11)	/* Get the pte */
 	/* concat physical page address(r11) and page offset(r10) */
 	rlwimi	r11, r10, 0, 32 - PAGE_SHIFT, 31
-	lwz	r11,0(r11)
+201:	lwz	r11,0(r11)
 /* Check if it really is a dcbx instruction. */
 /* dcbt and dcbtst does not generate DTLB Misses/Errors,
  * no need to include them here */
@@ -562,6 +584,10 @@ FixupDAR:/* Entry point for dcbx workaround. */
 141:	mfspr	r10,SPRN_SPRG_SCRATCH2
 	b	DARFixed	/* Nope, go back to normal TLB processing */
 
+	/* concat physical page address(r11) and page offset(r10) */
+200:	rlwimi	r11, r10, 0, 32 - (PAGE_SHIFT << 1), 31
+	b	201b
+
 144:	mfspr	r10, SPRN_DSISR
 	rlwinm	r10, r10,0,7,5	/* Clear store bit for buggy dcbst insn */
 	mtspr	SPRN_DSISR, r10
@@ -857,68 +883,6 @@ initial_mmu:
 
 
 /*
- * Set up to use a given MMU context.
- * r3 is context number, r4 is PGD pointer.
- *
- * We place the physical address of the new task page directory loaded
- * into the MMU base register, and set the ASID compare register with
- * the new "context."
- */
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-
-	/* Register M_TW will contain base address of level 1 table minus the
-	 * lower part of the kernel PGDIR base address, so that all accesses to
-	 * level 1 table are done relative to lower part of kernel PGDIR base
-	 * address.
-	 */
-	li	r5, (swapper_pg_dir-PAGE_OFFSET)@l
-	sub	r4, r4, r5
-	tophys	(r4, r4)
-#ifdef CONFIG_8xx_CPU6
-	lis	r6, cpu6_errata_word@h
-	ori	r6, r6, cpu6_errata_word@l
-	li	r7, 0x3f80
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-#endif
-	mtspr	SPRN_M_TW, r4		/* Update pointeur to level 1 table */
-#ifdef CONFIG_8xx_CPU6
-	li	r7, 0x3380
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-#endif
-	mtspr	SPRN_M_CASID, r3	/* Update context */
-	SYNC
-	blr
-
-#ifdef CONFIG_8xx_CPU6
-/* It's here because it is unique to the 8xx.
- * It is important we get called with interrupts disabled.  I used to
- * do that, but it appears that all code that calls this already had
- * interrupt disabled.
- */
-	.globl	set_dec_cpu6
-set_dec_cpu6:
-	lis	r7, cpu6_errata_word@h
-	ori	r7, r7, cpu6_errata_word@l
-	li	r4, 0x2c00
-	stw	r4, 8(r7)
-	lwz	r4, 8(r7)
-        mtspr   22, r3		/* Update Decrementer */
-	SYNC
-	blr
-#endif
-
-/*
  * We put a few things here that have to be page-aligned.
  * This stuff goes at the beginning of the data segment,
  * which is page-aligned.
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index f705171..3bfa315 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1037,80 +1037,6 @@ _GLOBAL(set_context)
 	isync			/* Force context change */
 	blr
 
-_GLOBAL(flush_dcache_L1)
-	mfspr	r3,SPRN_L1CFG0
-
-	rlwinm	r5,r3,9,3	/* Extract cache block size */
-	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
-				 * are currently defined.
-				 */
-	li	r4,32
-	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
-				 *      log2(number of ways)
-				 */
-	slw	r5,r4,r5	/* r5 = cache block size */
-
-	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
-	mulli	r7,r7,13	/* An 8-way cache will require 13
-				 * loads per set.
-				 */
-	slw	r7,r7,r6
-
-	/* save off HID0 and set DCFA */
-	mfspr	r8,SPRN_HID0
-	ori	r9,r8,HID0_DCFA@l
-	mtspr	SPRN_HID0,r9
-	isync
-
-	lis	r4,KERNELBASE@h
-	mtctr	r7
-
-1:	lwz	r3,0(r4)	/* Load... */
-	add	r4,r4,r5
-	bdnz	1b
-
-	msync
-	lis	r4,KERNELBASE@h
-	mtctr	r7
-
-1:	dcbf	0,r4		/* ...and flush. */
-	add	r4,r4,r5
-	bdnz	1b
-	
-	/* restore HID0 */
-	mtspr	SPRN_HID0,r8
-	isync
-
-	blr
-
-/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
-_GLOBAL(__flush_disable_L1)
-	mflr	r10
-	bl	flush_dcache_L1	/* Flush L1 d-cache */
-	mtlr	r10
-
-	mfspr	r4, SPRN_L1CSR0	/* Invalidate and disable d-cache */
-	li	r5, 2
-	rlwimi	r4, r5, 0, 3
-
-	msync
-	isync
-	mtspr	SPRN_L1CSR0, r4
-	isync
-
-1:	mfspr	r4, SPRN_L1CSR0	/* Wait for the invalidate to finish */
-	andi.	r4, r4, 2
-	bne	1b
-
-	mfspr	r4, SPRN_L1CSR1	/* Invalidate and disable i-cache */
-	li	r5, 2
-	rlwimi	r4, r5, 0, 3
-
-	mtspr	SPRN_L1CSR1, r4
-	isync
-
-	blr
-
 #ifdef CONFIG_SMP
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index be8edd6..bf5160f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -91,17 +91,16 @@ _GLOBAL(mulhdu)
 	addc	r7,r0,r7
 	addze	r4,r4
 1:	beqlr	cr1		/* all done if high part of A is 0 */
-	mr	r10,r3
 	mullw	r9,r3,r5
-	mulhwu	r3,r3,r5
+	mulhwu	r10,r3,r5
 	beq	2f
-	mullw	r0,r10,r6
-	mulhwu	r8,r10,r6
+	mullw	r0,r3,r6
+	mulhwu	r8,r3,r6
 	addc	r7,r0,r7
 	adde	r4,r4,r8
-	addze	r3,r3
+	addze	r10,r10
 2:	addc	r4,r4,r9
-	addze	r3,r3
+	addze	r3,r10
 	blr
 
 /*
@@ -296,12 +295,9 @@ _GLOBAL(real_writeb)
  * Flush instruction cache.
  * This is a no-op on the 601.
  */
+#ifndef CONFIG_PPC_8xx
 _GLOBAL(flush_instruction_cache)
-#if defined(CONFIG_8xx)
-	isync
-	lis	r5, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r5
-#elif defined(CONFIG_4xx)
+#if defined(CONFIG_4xx)
 #ifdef CONFIG_403GCX
 	li      r3, 512
 	mtctr   r3
@@ -334,9 +330,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
 	mfspr	r3,SPRN_HID0
 	ori	r3,r3,HID0_ICFI
 	mtspr	SPRN_HID0,r3
-#endif /* CONFIG_8xx/4xx */
+#endif /* CONFIG_4xx */
 	isync
 	blr
+#endif /* CONFIG_PPC_8xx */
 
 /*
  * Write any modified data cache blocks out to memory
@@ -350,10 +347,9 @@ BEGIN_FTR_SECTION
 	PURGE_PREFETCHED_INS
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
+	rlwinm	r3,r3,0,0,31 - L1_CACHE_SHIFT
 	subf	r4,r3,r4
-	add	r4,r4,r5
+	addi	r4,r4,L1_CACHE_BYTES - 1
 	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
@@ -377,71 +373,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	isync
 	blr
 /*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbf	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Like above, but invalidate the D-cache.  This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbi	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbi's to get to ram */
-	blr
-
-/*
  * Flush a particular page from the data cache to RAM.
  * Note: this is necessary because the instruction cache does *not*
  * snoop from the data cache.
@@ -519,22 +450,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 #endif /* CONFIG_BOOKE */
 
 /*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced).  This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
-	li	r0,PAGE_SIZE/L1_CACHE_BYTES
-	slw	r0,r0,r4
-	mtctr	r0
-1:	dcbz	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	blr
-
-/*
  * Copy a whole page.  We use the dcbz instruction on the destination
  * to reduce memory traffic (it eliminates the unnecessary reads of
  * the destination into cache).  This requires that the destination
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index ef7024da..9f01e28 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -6,7 +6,9 @@
 #include <asm/cacheflush.h>
 #include <asm/epapr_hcalls.h>
 
+#ifdef CONFIG_PPC64
 EXPORT_SYMBOL(flush_dcache_range);
+#endif
 EXPORT_SYMBOL(flush_icache_range);
 
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/ppc_ksyms_32.c b/arch/powerpc/kernel/ppc_ksyms_32.c
index 30ddd8a..2bfaafe 100644
--- a/arch/powerpc/kernel/ppc_ksyms_32.c
+++ b/arch/powerpc/kernel/ppc_ksyms_32.c
@@ -10,7 +10,6 @@
 #include <asm/pgtable.h>
 #include <asm/dcr.h>
 
-EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ec9ec20..8575d04 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -427,7 +427,7 @@ void generic_cpu_die(unsigned int cpu)
 
 	for (i = 0; i < 100; i++) {
 		smp_rmb();
-		if (per_cpu(cpu_state, cpu) == CPU_DEAD)
+		if (is_cpu_dead(cpu))
 			return;
 		msleep(100);
 	}
@@ -454,6 +454,11 @@ int generic_check_cpu_restart(unsigned int cpu)
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
 }
 
+int is_cpu_dead(unsigned int cpu)
+{
+	return per_cpu(cpu_state, cpu) == CPU_DEAD;
+}
+
 static bool secondaries_inhibited(void)
 {
 	return kvm_hv_mode_active();