KVM: PPC: book3s_hv: Add support for PPC970-family processors

This adds support for running KVM guests in supervisor mode on those
PPC970 processors that have a usable hypervisor mode.  Unfortunately,
Apple G5 machines have supervisor mode disabled (MSR[HV] is forced to
1), but the YDL PowerStation does have a usable hypervisor mode.

There are several differences between the PPC970 and POWER7 in how
guests are managed.  These differences are accommodated using the
CPU_FTR_ARCH_201 (PPC970) and CPU_FTR_ARCH_206 (POWER7) CPU feature
bits.  Notably, on PPC970:

* The LPCR, LPID or RMOR registers don't exist, and the functions of
  those registers are provided by bits in HID4 and one bit in HID0.

* External interrupts can be directed to the hypervisor, but unlike
  POWER7 they are masked by MSR[EE] in non-hypervisor modes and use
  SRR0/1 not HSRR0/1.

* There is no virtual RMA (VRMA) mode; the guest must use an RMO
  (real mode offset) area.

* The TLB entries are not tagged with the LPID, so it is necessary to
  flush the whole TLB on partition switch.  Furthermore, when switching
  partitions we have to ensure that no other CPU is executing the tlbie
  or tlbsync instructions in either the old or the new partition,
  otherwise undefined behaviour can occur.

* The PMU has 8 counters (PMC registers) rather than 6.

* The DSCR, PURR, SPURR, AMR, AMOR, UAMOR registers don't exist.

* The SLB has 64 entries rather than 32.

* There is no mediated external interrupt facility, so if we switch to
  a guest that has a virtual external interrupt pending but the guest
  has MSR[EE] = 0, we have to arrange to have an interrupt pending for
  it so that we can get control back once it re-enables interrupts.  We
  do that by sending ourselves an IPI with smp_send_reschedule after
  hard-disabling interrupts.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

1 files changed, 5 insertions, 8 deletions

diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 5d9b78e..eeb42e0 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -67,23 +67,20 @@ config KVM_BOOK3S_64
 	  If unsure, say N.
 
 config KVM_BOOK3S_64_HV
-	bool "KVM support for POWER7 using hypervisor mode in host"
+	bool "KVM support for POWER7 and PPC970 using hypervisor mode in host"
 	depends on KVM_BOOK3S_64
 	---help---
 	  Support running unmodified book3s_64 guest kernels in
-	  virtual machines on POWER7 processors that have hypervisor
-	  mode available to the host.
+	  virtual machines on POWER7 and PPC970 processors that have
+	  hypervisor mode available to the host.
 
 	  If you say Y here, KVM will use the hardware virtualization
 	  facilities of POWER7 (and later) processors, meaning that
 	  guest operating systems will run at full hardware speed
 	  using supervisor and user modes.  However, this also means
 	  that KVM is not usable under PowerVM (pHyp), is only usable
-	  on POWER7 (or later) processors, and can only emulate
-	  POWER5+, POWER6 and POWER7 processors.
-
-	  This module provides access to the hardware capabilities through
-	  a character device node named /dev/kvm.
+	  on POWER7 (or later) processors and PPC970-family processors,
+	  and cannot emulate a different processor from the host processor.
 
 	  If unsure, say N.