diff options
author | Stephen Rothwell <sfr@canb.auug.org.au> | 2005-09-19 13:24:08 (GMT) |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2005-09-21 09:21:08 (GMT) |
commit | 86a5cddbd9676b129cfa2ed7a1a11759d3b2b512 (patch) | |
tree | 7d5d4fdda4df9067c43870f5dcb3d5c714fdf227 /arch/powerpc/oprofile/op_model_power4.c | |
parent | 654810ec899ea5f2fc2138fca1793b603d481ff4 (diff) | |
download | linux-86a5cddbd9676b129cfa2ed7a1a11759d3b2b512.tar.xz |
[PATCH] powerpc: merge the rest of arch/ppc*/oprofile
- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/oprofile/op_model_power4.c')
-rw-r--r-- | arch/powerpc/oprofile/op_model_power4.c | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c new file mode 100644 index 0000000..8864493 --- /dev/null +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/systemcfg.h> +#include <asm/rtas.h> +#include <asm/oprofile_impl.h> + +#define dbg(args...) + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int oprofile_running; +static int mmcra_has_sihv; + +/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ +static u32 mmcr0_val; +static u64 mmcr1_val; +static u32 mmcra_val; + +/* + * Since we do not have an NMI, backtracing through spinlocks is + * only a best guess. In light of this, allow it to be disabled at + * runtime. + */ +static int backtrace_spinlocks; + +static void power4_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + /* + * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above. + * However we disable it on all POWER4 until we verify it works + * (I was seeing some strange behaviour last time I tried). + * + * It has been verified to work on POWER5 so we enable it there. + */ + if (cpu_has_feature(CPU_FTR_MMCRA_SIHV)) + mmcra_has_sihv = 1; + + /* + * The performance counter event settings are given in the mmcr0, + * mmcr1 and mmcra values passed from the user in the + * op_system_config structure (sys variable). + */ + mmcr0_val = sys->mmcr0; + mmcr1_val = sys->mmcr1; + mmcra_val = sys->mmcra; + + backtrace_spinlocks = sys->backtrace_spinlocks; + + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + /* setup user and kernel profiling */ + if (sys->enable_kernel) + mmcr0_val &= ~MMCR0_KERNEL_DISABLE; + else + mmcr0_val |= MMCR0_KERNEL_DISABLE; + + if (sys->enable_user) + mmcr0_val &= ~MMCR0_PROBLEM_DISABLE; + else + mmcr0_val |= MMCR0_PROBLEM_DISABLE; +} + +extern void ppc64_enable_pmcs(void); + +static void power4_cpu_setup(void *unused) +{ + unsigned int mmcr0 = mmcr0_val; + unsigned long mmcra = mmcra_val; + + ppc64_enable_pmcs(); + + /* set the freeze bit */ + mmcr0 |= MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; + mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; + mtspr(SPRN_MMCR0, mmcr0); + + mtspr(SPRN_MMCR1, mmcr1_val); + + mmcra |= MMCRA_SAMPLE_ENABLE; + mtspr(SPRN_MMCRA, mmcra); + + dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), + mfspr(SPRN_MMCR0)); + dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), + mfspr(SPRN_MMCR1)); + dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(), + mfspr(SPRN_MMCRA)); +} + +static void power4_start(struct op_counter_config *ctr) +{ + int i; + unsigned int mmcr0; + + /* set the PMM bit (see comment below) */ + mtmsrd(mfmsr() | MSR_PMM); + + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { + if (ctr[i].enabled) { + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + + mmcr0 = mfspr(SPRN_MMCR0); + + /* + * We must clear the PMAO bit on some (GQ) chips. Just do it + * all the time + */ + mmcr0 &= ~MMCR0_PMAO; + + /* + * now clear the freeze bit, counting will not start until we + * rfid from this excetion, because only at that point will + * the PMM bit be cleared + */ + mmcr0 &= ~MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + oprofile_running = 1; + + dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); +} + +static void power4_stop(void) +{ + unsigned int mmcr0; + + /* freeze counters */ + mmcr0 = mfspr(SPRN_MMCR0); + mmcr0 |= MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); + + oprofile_running = 0; + + dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); + + mb(); +} + +/* Fake functions used by canonicalize_pc */ +static void __attribute_used__ hypervisor_bucket(void) +{ +} + +static void __attribute_used__ rtas_bucket(void) +{ +} + +static void __attribute_used__ kernel_unknown_bucket(void) +{ +} + +static unsigned long check_spinlock_pc(struct pt_regs *regs, + unsigned long profile_pc) +{ + unsigned long pc = instruction_pointer(regs); + + /* + * If both the SIAR (sampled instruction) and the perfmon exception + * occurred in a spinlock region then we account the sample to the + * calling function. This isnt 100% correct, we really need soft + * IRQ disable so we always get the perfmon exception at the + * point at which the SIAR is set. + */ + if (backtrace_spinlocks && in_lock_functions(pc) && + in_lock_functions(profile_pc)) + return regs->link; + else + return profile_pc; +} + +/* + * On GQ and newer the MMCRA stores the HV and PR bits at the time + * the SIAR was sampled. We use that to work out if the SIAR was sampled in + * the hypervisor, our exception vectors or RTAS. + */ +static unsigned long get_pc(struct pt_regs *regs) +{ + unsigned long pc = mfspr(SPRN_SIAR); + unsigned long mmcra; + + /* Cant do much about it */ + if (!mmcra_has_sihv) + return check_spinlock_pc(regs, pc); + + mmcra = mfspr(SPRN_MMCRA); + + /* Were we in the hypervisor? */ + if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && + (mmcra & MMCRA_SIHV)) + /* function descriptor madness */ + return *((unsigned long *)hypervisor_bucket); + + /* We were in userspace, nothing to do */ + if (mmcra & MMCRA_SIPR) + return pc; + +#ifdef CONFIG_PPC_RTAS + /* Were we in RTAS? */ + if (pc >= rtas.base && pc < (rtas.base + rtas.size)) + /* function descriptor madness */ + return *((unsigned long *)rtas_bucket); +#endif + + /* Were we in our exception vectors or SLB real mode miss handler? */ + if (pc < 0x1000000UL) + return (unsigned long)__va(pc); + + /* Not sure where we were */ + if (pc < KERNELBASE) + /* function descriptor madness */ + return *((unsigned long *)kernel_unknown_bucket); + + return check_spinlock_pc(regs, pc); +} + +static int get_kernel(unsigned long pc) +{ + int is_kernel; + + if (!mmcra_has_sihv) { + is_kernel = (pc >= KERNELBASE); + } else { + unsigned long mmcra = mfspr(SPRN_MMCRA); + is_kernel = ((mmcra & MMCRA_SIPR) == 0); + } + + return is_kernel; +} + +static void power4_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + unsigned int mmcr0; + + pc = get_pc(regs); + is_kernel = get_kernel(pc); + + /* set the PMM bit (see comment below) */ + mtmsrd(mfmsr() | MSR_PMM); + + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + mmcr0 = mfspr(SPRN_MMCR0); + + /* reset the perfmon trigger */ + mmcr0 |= MMCR0_PMXE; + + /* + * We must clear the PMAO bit on some (GQ) chips. Just do it + * all the time + */ + mmcr0 &= ~MMCR0_PMAO; + + /* + * now clear the freeze bit, counting will not start until we + * rfid from this exception, because only at that point will + * the PMM bit be cleared + */ + mmcr0 &= ~MMCR0_FC; + mtspr(SPRN_MMCR0, mmcr0); +} + +struct op_powerpc_model op_model_power4 = { + .reg_setup = power4_reg_setup, + .cpu_setup = power4_cpu_setup, + .start = power4_start, + .stop = power4_stop, + .handle_interrupt = power4_handle_interrupt, +}; |