Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile

76 files changed, 3000 insertions, 6782 deletions

diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 4a9ad87..7bfb9b1 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -40,6 +40,7 @@ static const struct of_device_id mpc85xx_common_ids[] __initconst = {
 	{ .compatible = "fsl,qoriq-pcie-v2.4", },
 	{ .compatible = "fsl,qoriq-pcie-v2.3", },
 	{ .compatible = "fsl,qoriq-pcie-v2.2", },
+	{ .compatible = "fsl,fman", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 1f309cc..9824d2c 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -88,6 +88,15 @@ static const struct of_device_id of_device_ids[] = {
 		.compatible	= "simple-bus"
 	},
 	{
+		.compatible	= "mdio-mux-gpio"
+	},
+	{
+		.compatible	= "fsl,fpga-ngpixis"
+	},
+	{
+		.compatible	= "fsl,fpga-qixis"
+	},
+	{
 		.compatible	= "fsl,srio",
 	},
 	{
@@ -108,6 +117,9 @@ static const struct of_device_id of_device_ids[] = {
 	{
 		.compatible	= "fsl,qe",
 	},
+	{
+		.compatible    = "fsl,fman",
+	},
 	/* The following two are for the Freescale hypervisor */
 	{
 		.name		= "hypervisor",
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index d7c1e69..8631ac5 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -360,10 +360,10 @@ static void mpc85xx_smp_kexec_down(void *arg)
 static void map_and_flush(unsigned long paddr)
 {
 	struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
-	unsigned long kaddr  = (unsigned long)kmap(page);
+	unsigned long kaddr  = (unsigned long)kmap_atomic(page);
 
 	flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
-	kunmap(page);
+	kunmap_atomic((void *)kaddr);
 }
 
 /**
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 391b3f6..b7f9c40 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -72,11 +72,6 @@ config PPC_SMP_MUXED_IPI
 	  cpu.	This will enable the generic code to multiplex the 4
 	  messages on to one ipi.
 
-config PPC_UDBG_BEAT
-	bool "BEAT based debug console"
-	depends on PPC_CELLEB
-	default n
-
 config IPIC
 	bool
 	default n
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 76483e3..7264e91 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -2,6 +2,7 @@ config PPC64
 	bool "64-bit kernel"
 	default n
 	select HAVE_VIRT_CPU_ACCOUNTING
+	select ZLIB_DEFLATE
 	help
 	  This option selects whether a 32-bit or a 64-bit kernel
 	  will be built.
@@ -15,7 +16,7 @@ choice
 	  The most common ones are the desktop and server CPUs (601, 603,
 	  604, 740, 750, 74xx) CPUs from Freescale and IBM, with their
 	  embedded 512x/52xx/82xx/83xx/86xx counterparts.
-	  The other embeeded parts, namely 4xx, 8xx, e200 (55xx) and e500
+	  The other embedded parts, namely 4xx, 8xx, e200 (55xx) and e500
 	  (85xx) each form a family of their own that is not compatible
 	  with the others.
 
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 870b6db..2f23133 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -33,17 +33,6 @@ config PPC_IBM_CELL_BLADE
 	select PPC_UDBG_16550
 	select UDBG_RTAS_CONSOLE
 
-config PPC_CELLEB
-	bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
-	depends on PPC64 && PPC_BOOK3S
-	select PPC_CELL_NATIVE
-	select PPC_OF_PLATFORM_PCI
-	select PCI
-	select HAS_TXX9_SERIAL
-	select PPC_UDBG_BEAT
-	select USB_OHCI_BIG_ENDIAN_MMIO
-	select USB_EHCI_BIG_ENDIAN_MMIO
-
 config PPC_CELL_QPACE
 	bool "IBM Cell - QPACE"
 	depends on PPC64 && PPC_BOOK3S
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 2d16884..34699bd 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -29,18 +29,3 @@ obj-$(CONFIG_AXON_MSI)			+= axon_msi.o
 
 # qpace setup
 obj-$(CONFIG_PPC_CELL_QPACE)		+= qpace_setup.o
-
-# celleb stuff
-ifeq ($(CONFIG_PPC_CELLEB),y)
-obj-y					+= celleb_setup.o \
-					   celleb_pci.o celleb_scc_epci.o \
-					   celleb_scc_pciex.o \
-					   celleb_scc_uhc.o \
-					   spider-pci.o beat.o beat_htab.o \
-					   beat_hvCall.o beat_interrupt.o \
-					   beat_iommu.o
-
-obj-$(CONFIG_PPC_UDBG_BEAT)		+= beat_udbg.o
-obj-$(CONFIG_SERIAL_TXX9)		+= celleb_scc_sio.o
-obj-$(CONFIG_SPU_BASE)			+= beat_spu_priv1.o
-endif
diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c
deleted file mode 100644
index affcf56..0000000
--- a/arch/powerpc/platforms/cell/beat.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Simple routines for Celleb/Beat
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/rtc.h>
-#include <linux/interrupt.h>
-#include <linux/irqreturn.h>
-#include <linux/reboot.h>
-
-#include <asm/hvconsole.h>
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/firmware.h>
-
-#include "beat_wrapper.h"
-#include "beat.h"
-#include "beat_interrupt.h"
-
-static int beat_pm_poweroff_flag;
-
-void beat_restart(char *cmd)
-{
-	beat_shutdown_logical_partition(!beat_pm_poweroff_flag);
-}
-
-void beat_power_off(void)
-{
-	beat_shutdown_logical_partition(0);
-}
-
-u64 beat_halt_code = 0x1000000000000000UL;
-EXPORT_SYMBOL(beat_halt_code);
-
-void beat_halt(void)
-{
-	beat_shutdown_logical_partition(beat_halt_code);
-}
-
-int beat_set_rtc_time(struct rtc_time *rtc_time)
-{
-	u64 tim;
-	tim = mktime(rtc_time->tm_year+1900,
-		     rtc_time->tm_mon+1, rtc_time->tm_mday,
-		     rtc_time->tm_hour, rtc_time->tm_min, rtc_time->tm_sec);
-	if (beat_rtc_write(tim))
-		return -1;
-	return 0;
-}
-
-void beat_get_rtc_time(struct rtc_time *rtc_time)
-{
-	u64 tim;
-
-	if (beat_rtc_read(&tim))
-		tim = 0;
-	to_tm(tim, rtc_time);
-	rtc_time->tm_year -= 1900;
-	rtc_time->tm_mon -= 1;
-}
-
-#define	BEAT_NVRAM_SIZE	4096
-
-ssize_t beat_nvram_read(char *buf, size_t count, loff_t *index)
-{
-	unsigned int i;
-	unsigned long len;
-	char *p = buf;
-
-	if (*index >= BEAT_NVRAM_SIZE)
-		return -ENODEV;
-	i = *index;
-	if (i + count > BEAT_NVRAM_SIZE)
-		count = BEAT_NVRAM_SIZE - i;
-
-	for (; count != 0; count -= len) {
-		len = count;
-		if (len > BEAT_NVRW_CNT)
-			len = BEAT_NVRW_CNT;
-		if (beat_eeprom_read(i, len, p))
-			return -EIO;
-
-		p += len;
-		i += len;
-	}
-	*index = i;
-	return p - buf;
-}
-
-ssize_t beat_nvram_write(char *buf, size_t count, loff_t *index)
-{
-	unsigned int i;
-	unsigned long len;
-	char *p = buf;
-
-	if (*index >= BEAT_NVRAM_SIZE)
-		return -ENODEV;
-	i = *index;
-	if (i + count > BEAT_NVRAM_SIZE)
-		count = BEAT_NVRAM_SIZE - i;
-
-	for (; count != 0; count -= len) {
-		len = count;
-		if (len > BEAT_NVRW_CNT)
-			len = BEAT_NVRW_CNT;
-		if (beat_eeprom_write(i, len, p))
-			return -EIO;
-
-		p += len;
-		i += len;
-	}
-	*index = i;
-	return p - buf;
-}
-
-ssize_t beat_nvram_get_size(void)
-{
-	return BEAT_NVRAM_SIZE;
-}
-
-int beat_set_xdabr(unsigned long dabr, unsigned long dabrx)
-{
-	if (beat_set_dabr(dabr, dabrx))
-		return -1;
-	return 0;
-}
-
-int64_t beat_get_term_char(u64 vterm, u64 *len, u64 *t1, u64 *t2)
-{
-	u64 db[2];
-	s64 ret;
-
-	ret = beat_get_characters_from_console(vterm, len, (u8 *)db);
-	if (ret == 0) {
-		*t1 = db[0];
-		*t2 = db[1];
-	}
-	return ret;
-}
-EXPORT_SYMBOL(beat_get_term_char);
-
-int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
-{
-	u64 db[2];
-
-	db[0] = t1;
-	db[1] = t2;
-	return beat_put_characters_to_console(vterm, len, (u8 *)db);
-}
-EXPORT_SYMBOL(beat_put_term_char);
-
-void beat_power_save(void)
-{
-	beat_pause(0);
-}
-
-#ifdef CONFIG_KEXEC
-void beat_kexec_cpu_down(int crash, int secondary)
-{
-	beatic_deinit_IRQ();
-}
-#endif
-
-static irqreturn_t beat_power_event(int virq, void *arg)
-{
-	printk(KERN_DEBUG "Beat: power button pressed\n");
-	beat_pm_poweroff_flag = 1;
-	ctrl_alt_del();
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t beat_reset_event(int virq, void *arg)
-{
-	printk(KERN_DEBUG "Beat: reset button pressed\n");
-	beat_pm_poweroff_flag = 0;
-	ctrl_alt_del();
-	return IRQ_HANDLED;
-}
-
-static struct beat_event_list {
-	const char *typecode;
-	irq_handler_t handler;
-	unsigned int virq;
-} beat_event_list[] = {
-	{ "power", beat_power_event, 0 },
-	{ "reset", beat_reset_event, 0 },
-};
-
-static int __init beat_register_event(void)
-{
-	u64 path[4], data[2];
-	int rc, i;
-	unsigned int virq;
-
-	for (i = 0; i < ARRAY_SIZE(beat_event_list); i++) {
-		struct beat_event_list *ev = &beat_event_list[i];
-
-		if (beat_construct_event_receive_port(data) != 0) {
-			printk(KERN_ERR "Beat: "
-			       "cannot construct event receive port for %s\n",
-			       ev->typecode);
-			return -EINVAL;
-		}
-
-		virq = irq_create_mapping(NULL, data[0]);
-		if (virq == NO_IRQ) {
-			printk(KERN_ERR "Beat: failed to get virtual IRQ"
-			       " for event receive port for %s\n",
-			       ev->typecode);
-			beat_destruct_event_receive_port(data[0]);
-			return -EIO;
-		}
-		ev->virq = virq;
-
-		rc = request_irq(virq, ev->handler, 0,
-				      ev->typecode, NULL);
-		if (rc != 0) {
-			printk(KERN_ERR "Beat: failed to request virtual IRQ"
-			       " for event receive port for %s\n",
-			       ev->typecode);
-			beat_destruct_event_receive_port(data[0]);
-			return rc;
-		}
-
-		path[0] = 0x1000000065780000ul;	/* 1,ex */
-		path[1] = 0x627574746f6e0000ul;	/* button */
-		path[2] = 0;
-		strncpy((char *)&path[2], ev->typecode, 8);
-		path[3] = 0;
-		data[1] = 0;
-
-		beat_create_repository_node(path, data);
-	}
-	return 0;
-}
-
-static int __init beat_event_init(void)
-{
-	if (!firmware_has_feature(FW_FEATURE_BEAT))
-		return -EINVAL;
-
-	beat_pm_poweroff_flag = 0;
-	return beat_register_event();
-}
-
-device_initcall(beat_event_init);
diff --git a/arch/powerpc/platforms/cell/beat.h b/arch/powerpc/platforms/cell/beat.h
deleted file mode 100644
index bfcb8e3..0000000
--- a/arch/powerpc/platforms/cell/beat.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Guest OS Interfaces.
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _CELLEB_BEAT_H
-#define _CELLEB_BEAT_H
-
-int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
-int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
-int64_t beat_repository_encode(int, const char *, uint64_t[4]);
-void beat_restart(char *);
-void beat_power_off(void);
-void beat_halt(void);
-int beat_set_rtc_time(struct rtc_time *);
-void beat_get_rtc_time(struct rtc_time *);
-ssize_t beat_nvram_get_size(void);
-ssize_t beat_nvram_read(char *, size_t, loff_t *);
-ssize_t beat_nvram_write(char *, size_t, loff_t *);
-int beat_set_xdabr(unsigned long, unsigned long);
-void beat_power_save(void);
-void beat_kexec_cpu_down(int, int);
-
-#endif /* _CELLEB_BEAT_H */
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
deleted file mode 100644
index bee9232..0000000
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * "Cell Reference Set" HTAB support.
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/pseries/lpar.c:
- *  Copyright (C) 2001 Todd Inglett, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG_LOW
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "beat_wrapper.h"
-
-#ifdef DEBUG_LOW
-#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0)
-#else
-#define DBG_LOW(fmt...) do { } while (0)
-#endif
-
-static DEFINE_RAW_SPINLOCK(beat_htab_lock);
-
-static inline unsigned int beat_read_mask(unsigned hpte_group)
-{
-	unsigned long rmask = 0;
-	u64 hpte_v[5];
-
-	beat_read_htab_entries(0, hpte_group + 0, hpte_v);
-	if (!(hpte_v[0] & HPTE_V_BOLTED))
-		rmask |= 0x8000;
-	if (!(hpte_v[1] & HPTE_V_BOLTED))
-		rmask |= 0x4000;
-	if (!(hpte_v[2] & HPTE_V_BOLTED))
-		rmask |= 0x2000;
-	if (!(hpte_v[3] & HPTE_V_BOLTED))
-		rmask |= 0x1000;
-	beat_read_htab_entries(0, hpte_group + 4, hpte_v);
-	if (!(hpte_v[0] & HPTE_V_BOLTED))
-		rmask |= 0x0800;
-	if (!(hpte_v[1] & HPTE_V_BOLTED))
-		rmask |= 0x0400;
-	if (!(hpte_v[2] & HPTE_V_BOLTED))
-		rmask |= 0x0200;
-	if (!(hpte_v[3] & HPTE_V_BOLTED))
-		rmask |= 0x0100;
-	hpte_group = ~hpte_group & (htab_hash_mask * HPTES_PER_GROUP);
-	beat_read_htab_entries(0, hpte_group + 0, hpte_v);
-	if (!(hpte_v[0] & HPTE_V_BOLTED))
-		rmask |= 0x80;
-	if (!(hpte_v[1] & HPTE_V_BOLTED))
-		rmask |= 0x40;
-	if (!(hpte_v[2] & HPTE_V_BOLTED))
-		rmask |= 0x20;
-	if (!(hpte_v[3] & HPTE_V_BOLTED))
-		rmask |= 0x10;
-	beat_read_htab_entries(0, hpte_group + 4, hpte_v);
-	if (!(hpte_v[0] & HPTE_V_BOLTED))
-		rmask |= 0x08;
-	if (!(hpte_v[1] & HPTE_V_BOLTED))
-		rmask |= 0x04;
-	if (!(hpte_v[2] & HPTE_V_BOLTED))
-		rmask |= 0x02;
-	if (!(hpte_v[3] & HPTE_V_BOLTED))
-		rmask |= 0x01;
-	return rmask;
-}
-
-static long beat_lpar_hpte_insert(unsigned long hpte_group,
-				  unsigned long vpn, unsigned long pa,
-				  unsigned long rflags, unsigned long vflags,
-				  int psize, int apsize, int ssize)
-{
-	unsigned long lpar_rc;
-	u64 hpte_v, hpte_r, slot;
-
-	if (vflags & HPTE_V_SECONDARY)
-		return -1;
-
-	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
-			"rflags=%lx, vflags=%lx, psize=%d)\n",
-		hpte_group, va, pa, rflags, vflags, psize);
-
-	hpte_v = hpte_encode_v(vpn, psize, apsize, MMU_SEGSIZE_256M) |
-		vflags | HPTE_V_VALID;
-	hpte_r = hpte_encode_r(pa, psize, apsize) | rflags;
-
-	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
-
-	if (rflags & _PAGE_NO_CACHE)
-		hpte_r &= ~HPTE_R_M;
-
-	raw_spin_lock(&beat_htab_lock);
-	lpar_rc = beat_read_mask(hpte_group);
-	if (lpar_rc == 0) {
-		if (!(vflags & HPTE_V_BOLTED))
-			DBG_LOW(" full\n");
-		raw_spin_unlock(&beat_htab_lock);
-		return -1;
-	}
-
-	lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48,
-		hpte_v, hpte_r, &slot);
-	raw_spin_unlock(&beat_htab_lock);
-
-	/*
-	 * Since we try and ioremap PHBs we don't own, the pte insert
-	 * will fail. However we must catch the failure in hash_page
-	 * or we will loop forever, so return -2 in this case.
-	 */
-	if (unlikely(lpar_rc != 0)) {
-		if (!(vflags & HPTE_V_BOLTED))
-			DBG_LOW(" lpar err %lx\n", lpar_rc);
-		return -2;
-	}
-	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW(" -> slot: %lx\n", slot);
-
-	/* We have to pass down the secondary bucket bit here as well */
-	return (slot ^ hpte_group) & 15;
-}
-
-static long beat_lpar_hpte_remove(unsigned long hpte_group)
-{
-	DBG_LOW("hpte_remove(group=%lx)\n", hpte_group);
-	return -1;
-}
-
-static unsigned long beat_lpar_hpte_getword0(unsigned long slot)
-{
-	unsigned long dword0;
-	unsigned long lpar_rc;
-	u64 dword[5];
-
-	lpar_rc = beat_read_htab_entries(0, slot & ~3UL, dword);
-
-	dword0 = dword[slot&3];
-
-	BUG_ON(lpar_rc != 0);
-
-	return dword0;
-}
-
-static void beat_lpar_hptab_clear(void)
-{
-	unsigned long size_bytes = 1UL << ppc64_pft_size;
-	unsigned long hpte_count = size_bytes >> 4;
-	int i;
-	u64 dummy0, dummy1;
-
-	/* TODO: Use bulk call */
-	for (i = 0; i < hpte_count; i++)
-		beat_write_htab_entry(0, i, 0, 0, -1UL, -1UL, &dummy0, &dummy1);
-}
-
-/*
- * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and
- * the low 3 bits of flags happen to line up.  So no transform is needed.
- * We can probably optimize here and assume the high bits of newpp are
- * already zero.  For now I am paranoid.
- */
-static long beat_lpar_hpte_updatepp(unsigned long slot,
-				    unsigned long newpp,
-				    unsigned long vpn,
-				    int psize, int apsize,
-				    int ssize, unsigned long flags)
-{
-	unsigned long lpar_rc;
-	u64 dummy0, dummy1;
-	unsigned long want_v;
-
-	want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
-
-	DBG_LOW("    update: "
-		"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
-		want_v & HPTE_V_AVPN, slot, psize, newpp);
-
-	raw_spin_lock(&beat_htab_lock);
-	dummy0 = beat_lpar_hpte_getword0(slot);
-	if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) {
-		DBG_LOW("not found !\n");
-		raw_spin_unlock(&beat_htab_lock);
-		return -1;
-	}
-
-	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0,
-					&dummy1);
-	raw_spin_unlock(&beat_htab_lock);
-	if (lpar_rc != 0 || dummy0 == 0) {
-		DBG_LOW("not found !\n");
-		return -1;
-	}
-
-	DBG_LOW("ok %lx %lx\n", dummy0, dummy1);
-
-	BUG_ON(lpar_rc != 0);
-
-	return 0;
-}
-
-static long beat_lpar_hpte_find(unsigned long vpn, int psize)
-{
-	unsigned long hash;
-	unsigned long i, j;
-	long slot;
-	unsigned long want_v, hpte_v;
-
-	hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, MMU_SEGSIZE_256M);
-	want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
-
-	for (j = 0; j < 2; j++) {
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		for (i = 0; i < HPTES_PER_GROUP; i++) {
-			hpte_v = beat_lpar_hpte_getword0(slot);
-
-			if (HPTE_V_COMPARE(hpte_v, want_v)
-			    && (hpte_v & HPTE_V_VALID)
-			    && (!!(hpte_v & HPTE_V_SECONDARY) == j)) {
-				/* HPTE matches */
-				if (j)
-					slot = -slot;
-				return slot;
-			}
-			++slot;
-		}
-		hash = ~hash;
-	}
-
-	return -1;
-}
-
-static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
-					  unsigned long ea,
-					  int psize, int ssize)
-{
-	unsigned long vpn;
-	unsigned long lpar_rc, slot, vsid;
-	u64 dummy0, dummy1;
-
-	vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M);
-	vpn = hpt_vpn(ea, vsid, MMU_SEGSIZE_256M);
-
-	raw_spin_lock(&beat_htab_lock);
-	slot = beat_lpar_hpte_find(vpn, psize);
-	BUG_ON(slot == -1);
-
-	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7,
-		&dummy0, &dummy1);
-	raw_spin_unlock(&beat_htab_lock);
-
-	BUG_ON(lpar_rc != 0);
-}
-
-static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
-				      int psize, int apsize,
-				      int ssize, int local)
-{
-	unsigned long want_v;
-	unsigned long lpar_rc;
-	u64 dummy1, dummy2;
-	unsigned long flags;
-
-	DBG_LOW("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
-		slot, va, psize, local);
-	want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
-
-	raw_spin_lock_irqsave(&beat_htab_lock, flags);
-	dummy1 = beat_lpar_hpte_getword0(slot);
-
-	if ((dummy1 & ~0x7FUL) != (want_v & ~0x7FUL)) {
-		DBG_LOW("not found !\n");
-		raw_spin_unlock_irqrestore(&beat_htab_lock, flags);
-		return;
-	}
-
-	lpar_rc = beat_write_htab_entry(0, slot, 0, 0, HPTE_V_VALID, 0,
-		&dummy1, &dummy2);
-	raw_spin_unlock_irqrestore(&beat_htab_lock, flags);
-
-	BUG_ON(lpar_rc != 0);
-}
-
-void __init hpte_init_beat(void)
-{
-	ppc_md.hpte_invalidate	= beat_lpar_hpte_invalidate;
-	ppc_md.hpte_updatepp	= beat_lpar_hpte_updatepp;
-	ppc_md.hpte_updateboltedpp = beat_lpar_hpte_updateboltedpp;
-	ppc_md.hpte_insert	= beat_lpar_hpte_insert;
-	ppc_md.hpte_remove	= beat_lpar_hpte_remove;
-	ppc_md.hpte_clear_all	= beat_lpar_hptab_clear;
-}
-
-static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
-				  unsigned long vpn, unsigned long pa,
-				  unsigned long rflags, unsigned long vflags,
-				  int psize, int apsize, int ssize)
-{
-	unsigned long lpar_rc;
-	u64 hpte_v, hpte_r, slot;
-
-	if (vflags & HPTE_V_SECONDARY)
-		return -1;
-
-	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW("hpte_insert(group=%lx, vpn=%016lx, pa=%016lx, "
-			"rflags=%lx, vflags=%lx, psize=%d)\n",
-		hpte_group, vpn, pa, rflags, vflags, psize);
-
-	hpte_v = hpte_encode_v(vpn, psize, apsize, MMU_SEGSIZE_256M) |
-		vflags | HPTE_V_VALID;
-	hpte_r = hpte_encode_r(pa, psize, apsize) | rflags;
-
-	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
-
-	if (rflags & _PAGE_NO_CACHE)
-		hpte_r &= ~HPTE_R_M;
-
-	/* insert into not-volted entry */
-	lpar_rc = beat_insert_htab_entry3(0, hpte_group, hpte_v, hpte_r,
-		HPTE_V_BOLTED, 0, &slot);
-	/*
-	 * Since we try and ioremap PHBs we don't own, the pte insert
-	 * will fail. However we must catch the failure in hash_page
-	 * or we will loop forever, so return -2 in this case.
-	 */
-	if (unlikely(lpar_rc != 0)) {
-		if (!(vflags & HPTE_V_BOLTED))
-			DBG_LOW(" lpar err %lx\n", lpar_rc);
-		return -2;
-	}
-	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW(" -> slot: %lx\n", slot);
-
-	/* We have to pass down the secondary bucket bit here as well */
-	return (slot ^ hpte_group) & 15;
-}
-
-/*
- * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and
- * the low 3 bits of flags happen to line up.  So no transform is needed.
- * We can probably optimize here and assume the high bits of newpp are
- * already zero.  For now I am paranoid.
- */
-static long beat_lpar_hpte_updatepp_v3(unsigned long slot,
-				       unsigned long newpp,
-				       unsigned long vpn,
-				       int psize, int apsize,
-				       int ssize, unsigned long flags)
-{
-	unsigned long lpar_rc;
-	unsigned long want_v;
-	unsigned long pss;
-
-	want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
-	pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc[psize];
-
-	DBG_LOW("    update: "
-		"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
-		want_v & HPTE_V_AVPN, slot, psize, newpp);
-
-	lpar_rc = beat_update_htab_permission3(0, slot, want_v, pss, 7, newpp);
-
-	if (lpar_rc == 0xfffffff7) {
-		DBG_LOW("not found !\n");
-		return -1;
-	}
-
-	DBG_LOW("ok\n");
-
-	BUG_ON(lpar_rc != 0);
-
-	return 0;
-}
-
-static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long vpn,
-					 int psize, int apsize,
-					 int ssize, int local)
-{
-	unsigned long want_v;
-	unsigned long lpar_rc;
-	unsigned long pss;
-
-	DBG_LOW("    inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n",
-		slot, vpn, psize, local);
-	want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
-	pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc[psize];
-
-	lpar_rc = beat_invalidate_htab_entry3(0, slot, want_v, pss);
-
-	/* E_busy can be valid output: page may be already replaced */
-	BUG_ON(lpar_rc != 0 && lpar_rc != 0xfffffff7);
-}
-
-static int64_t _beat_lpar_hptab_clear_v3(void)
-{
-	return beat_clear_htab3(0);
-}
-
-static void beat_lpar_hptab_clear_v3(void)
-{
-	_beat_lpar_hptab_clear_v3();
-}
-
-void __init hpte_init_beat_v3(void)
-{
-	if (_beat_lpar_hptab_clear_v3() == 0) {
-		ppc_md.hpte_invalidate	= beat_lpar_hpte_invalidate_v3;
-		ppc_md.hpte_updatepp	= beat_lpar_hpte_updatepp_v3;
-		ppc_md.hpte_updateboltedpp = beat_lpar_hpte_updateboltedpp;
-		ppc_md.hpte_insert	= beat_lpar_hpte_insert_v3;
-		ppc_md.hpte_remove	= beat_lpar_hpte_remove;
-		ppc_md.hpte_clear_all	= beat_lpar_hptab_clear_v3;
-	} else {
-		ppc_md.hpte_invalidate	= beat_lpar_hpte_invalidate;
-		ppc_md.hpte_updatepp	= beat_lpar_hpte_updatepp;
-		ppc_md.hpte_updateboltedpp = beat_lpar_hpte_updateboltedpp;
-		ppc_md.hpte_insert	= beat_lpar_hpte_insert;
-		ppc_md.hpte_remove	= beat_lpar_hpte_remove;
-		ppc_md.hpte_clear_all	= beat_lpar_hptab_clear;
-	}
-}
diff --git a/arch/powerpc/platforms/cell/beat_hvCall.S b/arch/powerpc/platforms/cell/beat_hvCall.S
deleted file mode 100644
index 96c8019..0000000
--- a/arch/powerpc/platforms/cell/beat_hvCall.S
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Beat hypervisor call I/F
- *
- * (C) Copyright 2007 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/pseries/hvCall.S.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <asm/ppc_asm.h>
-
-/* Not implemented on Beat, now */
-#define	HCALL_INST_PRECALL
-#define	HCALL_INST_POSTCALL
-
-	.text
-
-#define	HVSC	.long	0x44000022
-
-/* Note: takes only 7 input parameters at maximum */
-_GLOBAL(beat_hcall_norets)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	mr	r11,r3
-	mr	r3,r4
-	mr	r4,r5
-	mr	r5,r6
-	mr	r6,r7
-	mr	r7,r8
-	mr	r8,r9
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes 8 input parameters at maximum */
-_GLOBAL(beat_hcall_norets8)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	mr	r11,r3
-	mr	r3,r4
-	mr	r4,r5
-	mr	r5,r6
-	mr	r6,r7
-	mr	r7,r8
-	mr	r8,r9
-	ld	r10,STK_PARAM(R10)(r1)
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes only 6 input parameters, 1 output parameters at maximum */
-_GLOBAL(beat_hcall1)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
-
-	mr	r11,r3
-	mr	r3,r5
-	mr	r4,r6
-	mr	r5,r7
-	mr	r6,r8
-	mr	r7,r9
-	mr	r8,r10
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	ld	r12,STK_PARAM(R4)(r1)
-	std	r4,  0(r12)
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes only 6 input parameters, 2 output parameters at maximum */
-_GLOBAL(beat_hcall2)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
-
-	mr	r11,r3
-	mr	r3,r5
-	mr	r4,r6
-	mr	r5,r7
-	mr	r6,r8
-	mr	r7,r9
-	mr	r8,r10
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	ld	r12,STK_PARAM(R4)(r1)
-	std	r4,  0(r12)
-	std	r5,  8(r12)
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes only 6 input parameters, 3 output parameters at maximum */
-_GLOBAL(beat_hcall3)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
-
-	mr	r11,r3
-	mr	r3,r5
-	mr	r4,r6
-	mr	r5,r7
-	mr	r6,r8
-	mr	r7,r9
-	mr	r8,r10
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	ld	r12,STK_PARAM(R4)(r1)
-	std	r4,  0(r12)
-	std	r5,  8(r12)
-	std	r6, 16(r12)
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes only 6 input parameters, 4 output parameters at maximum */
-_GLOBAL(beat_hcall4)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
-
-	mr	r11,r3
-	mr	r3,r5
-	mr	r4,r6
-	mr	r5,r7
-	mr	r6,r8
-	mr	r7,r9
-	mr	r8,r10
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	ld	r12,STK_PARAM(R4)(r1)
-	std	r4,  0(r12)
-	std	r5,  8(r12)
-	std	r6, 16(r12)
-	std	r7, 24(r12)
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes only 6 input parameters, 5 output parameters at maximum */
-_GLOBAL(beat_hcall5)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
-
-	mr	r11,r3
-	mr	r3,r5
-	mr	r4,r6
-	mr	r5,r7
-	mr	r6,r8
-	mr	r7,r9
-	mr	r8,r10
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	ld	r12,STK_PARAM(R4)(r1)
-	std	r4,  0(r12)
-	std	r5,  8(r12)
-	std	r6, 16(r12)
-	std	r7, 24(r12)
-	std	r8, 32(r12)
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
-
-/* Note: takes only 6 input parameters, 6 output parameters at maximum */
-_GLOBAL(beat_hcall6)
-	HMT_MEDIUM
-
-	mfcr	r0
-	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL
-
-	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
-
-	mr	r11,r3
-	mr	r3,r5
-	mr	r4,r6
-	mr	r5,r7
-	mr	r6,r8
-	mr	r7,r9
-	mr	r8,r10
-
-	HVSC				/* invoke the hypervisor */
-
-	HCALL_INST_POSTCALL
-
-	ld	r12,STK_PARAM(R4)(r1)
-	std	r4,  0(r12)
-	std	r5,  8(r12)
-	std	r6, 16(r12)
-	std	r7, 24(r12)
-	std	r8, 32(r12)
-	std	r9, 40(r12)
-
-	lwz	r0,8(r1)
-	mtcrf	0xff,r0
-
-	blr				/* return r3 = status */
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
deleted file mode 100644
index 9e5dfbc..0000000
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Celleb/Beat Interrupt controller
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/percpu.h>
-#include <linux/types.h>
-
-#include <asm/machdep.h>
-
-#include "beat_interrupt.h"
-#include "beat_wrapper.h"
-
-#define	MAX_IRQS	NR_IRQS
-static DEFINE_RAW_SPINLOCK(beatic_irq_mask_lock);
-static uint64_t	beatic_irq_mask_enable[(MAX_IRQS+255)/64];
-static uint64_t	beatic_irq_mask_ack[(MAX_IRQS+255)/64];
-
-static struct irq_domain *beatic_host;
-
-/*
- * In this implementation, "virq" == "IRQ plug number",
- * "(irq_hw_number_t)hwirq" == "IRQ outlet number".
- */
-
-/* assumption: locked */
-static inline void beatic_update_irq_mask(unsigned int irq_plug)
-{
-	int off;
-	unsigned long masks[4];
-
-	off = (irq_plug / 256) * 4;
-	masks[0] = beatic_irq_mask_enable[off + 0]
-		& beatic_irq_mask_ack[off + 0];
-	masks[1] = beatic_irq_mask_enable[off + 1]
-		& beatic_irq_mask_ack[off + 1];
-	masks[2] = beatic_irq_mask_enable[off + 2]
-		& beatic_irq_mask_ack[off + 2];
-	masks[3] = beatic_irq_mask_enable[off + 3]
-		& beatic_irq_mask_ack[off + 3];
-	if (beat_set_interrupt_mask(irq_plug&~255UL,
-		masks[0], masks[1], masks[2], masks[3]) != 0)
-		panic("Failed to set mask IRQ!");
-}
-
-static void beatic_mask_irq(struct irq_data *d)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
-	beatic_irq_mask_enable[d->irq/64] &= ~(1UL << (63 - (d->irq%64)));
-	beatic_update_irq_mask(d->irq);
-	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
-}
-
-static void beatic_unmask_irq(struct irq_data *d)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
-	beatic_irq_mask_enable[d->irq/64] |= 1UL << (63 - (d->irq%64));
-	beatic_update_irq_mask(d->irq);
-	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
-}
-
-static void beatic_ack_irq(struct irq_data *d)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
-	beatic_irq_mask_ack[d->irq/64] &= ~(1UL << (63 - (d->irq%64)));
-	beatic_update_irq_mask(d->irq);
-	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
-}
-
-static void beatic_end_irq(struct irq_data *d)
-{
-	s64 err;
-	unsigned long flags;
-
-	err = beat_downcount_of_interrupt(d->irq);
-	if (err != 0) {
-		if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
-			panic("Failed to downcount IRQ! Error = %16llx", err);
-
-		printk(KERN_ERR "IRQ over-downcounted, plug %d\n", d->irq);
-	}
-	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
-	beatic_irq_mask_ack[d->irq/64] |= 1UL << (63 - (d->irq%64));
-	beatic_update_irq_mask(d->irq);
-	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
-}
-
-static struct irq_chip beatic_pic = {
-	.name = "CELL-BEAT",
-	.irq_unmask = beatic_unmask_irq,
-	.irq_mask = beatic_mask_irq,
-	.irq_eoi = beatic_end_irq,
-};
-
-/*
- * Dispose binding hardware IRQ number (hw) and Virtuql IRQ number (virq),
- * update flags.
- *
- * Note that the number (virq) is already assigned at upper layer.
- */
-static void beatic_pic_host_unmap(struct irq_domain *h, unsigned int virq)
-{
-	beat_destruct_irq_plug(virq);
-}
-
-/*
- * Create or update binding hardware IRQ number (hw) and Virtuql
- * IRQ number (virq). This is called only once for a given mapping.
- *
- * Note that the number (virq) is already assigned at upper layer.
- */
-static int beatic_pic_host_map(struct irq_domain *h, unsigned int virq,
-			       irq_hw_number_t hw)
-{
-	int64_t	err;
-
-	err = beat_construct_and_connect_irq_plug(virq, hw);
-	if (err < 0)
-		return -EIO;
-
-	irq_set_status_flags(virq, IRQ_LEVEL);
-	irq_set_chip_and_handler(virq, &beatic_pic, handle_fasteoi_irq);
-	return 0;
-}
-
-/*
- * Translate device-tree interrupt spec to irq_hw_number_t style (ulong),
- * to pass away to irq_create_mapping().
- *
- * Called from irq_create_of_mapping() only.
- * Note: We have only 1 entry to translate.
- */
-static int beatic_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
-				 const u32 *intspec, unsigned int intsize,
-				 irq_hw_number_t *out_hwirq,
-				 unsigned int *out_flags)
-{
-	const u64 *intspec2 = (const u64 *)intspec;
-
-	*out_hwirq = *intspec2;
-	*out_flags |= IRQ_TYPE_LEVEL_LOW;
-	return 0;
-}
-
-static int beatic_pic_host_match(struct irq_domain *h, struct device_node *np)
-{
-	/* Match all */
-	return 1;
-}
-
-static const struct irq_domain_ops beatic_pic_host_ops = {
-	.map = beatic_pic_host_map,
-	.unmap = beatic_pic_host_unmap,
-	.xlate = beatic_pic_host_xlate,
-	.match = beatic_pic_host_match,
-};
-
-/*
- * Get an IRQ number
- * Note: returns VIRQ
- */
-static inline unsigned int beatic_get_irq_plug(void)
-{
-	int i;
-	uint64_t	pending[4], ub;
-
-	for (i = 0; i < MAX_IRQS; i += 256) {
-		beat_detect_pending_interrupts(i, pending);
-		__asm__ ("cntlzd %0,%1":"=r"(ub):
-			"r"(pending[0] & beatic_irq_mask_enable[i/64+0]
-				       & beatic_irq_mask_ack[i/64+0]));
-		if (ub != 64)
-			return i + ub + 0;
-		__asm__ ("cntlzd %0,%1":"=r"(ub):
-			"r"(pending[1] & beatic_irq_mask_enable[i/64+1]
-				       & beatic_irq_mask_ack[i/64+1]));
-		if (ub != 64)
-			return i + ub + 64;
-		__asm__ ("cntlzd %0,%1":"=r"(ub):
-			"r"(pending[2] & beatic_irq_mask_enable[i/64+2]
-				       & beatic_irq_mask_ack[i/64+2]));
-		if (ub != 64)
-			return i + ub + 128;
-		__asm__ ("cntlzd %0,%1":"=r"(ub):
-			"r"(pending[3] & beatic_irq_mask_enable[i/64+3]
-				       & beatic_irq_mask_ack[i/64+3]));
-		if (ub != 64)
-			return i + ub + 192;
-	}
-
-	return NO_IRQ;
-}
-unsigned int beatic_get_irq(void)
-{
-	unsigned int ret;
-
-	ret = beatic_get_irq_plug();
-	if (ret != NO_IRQ)
-		beatic_ack_irq(irq_get_irq_data(ret));
-	return ret;
-}
-
-/*
- */
-void __init beatic_init_IRQ(void)
-{
-	int	i;
-
-	memset(beatic_irq_mask_enable, 0, sizeof(beatic_irq_mask_enable));
-	memset(beatic_irq_mask_ack, 255, sizeof(beatic_irq_mask_ack));
-	for (i = 0; i < MAX_IRQS; i += 256)
-		beat_set_interrupt_mask(i, 0L, 0L, 0L, 0L);
-
-	/* Set out get_irq function */
-	ppc_md.get_irq = beatic_get_irq;
-
-	/* Allocate an irq host */
-	beatic_host = irq_domain_add_nomap(NULL, ~0, &beatic_pic_host_ops, NULL);
-	BUG_ON(beatic_host == NULL);
-	irq_set_default_host(beatic_host);
-}
-
-void beatic_deinit_IRQ(void)
-{
-	int	i;
-
-	for (i = 1; i < nr_irqs; i++)
-		beat_destruct_irq_plug(i);
-}
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.h b/arch/powerpc/platforms/cell/beat_interrupt.h
deleted file mode 100644
index a7e52f9..0000000
--- a/arch/powerpc/platforms/cell/beat_interrupt.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Celleb/Beat Interrupt controller
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef ASM_BEAT_PIC_H
-#define ASM_BEAT_PIC_H
-#ifdef __KERNEL__
-
-extern void beatic_init_IRQ(void);
-extern unsigned int beatic_get_irq(void);
-extern void beatic_deinit_IRQ(void);
-
-#endif
-#endif /* ASM_BEAT_PIC_H */
diff --git a/arch/powerpc/platforms/cell/beat_iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c
deleted file mode 100644
index 3ce6855..0000000
--- a/arch/powerpc/platforms/cell/beat_iommu.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Support for IOMMU on Celleb platform.
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/pci.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-
-#include "beat_wrapper.h"
-
-#define DMA_FLAGS 0xf800000000000000UL	/* r/w permitted, coherency required,
-					   strongest order */
-
-static int __init find_dma_window(u64 *io_space_id, u64 *ioid,
-				  u64 *base, u64 *size, u64 *io_page_size)
-{
-	struct device_node *dn;
-	const unsigned long *dma_window;
-
-	for_each_node_by_type(dn, "ioif") {
-		dma_window = of_get_property(dn, "toshiba,dma-window", NULL);
-		if (dma_window) {
-			*io_space_id = (dma_window[0] >> 32) & 0xffffffffUL;
-			*ioid = dma_window[0] & 0x7ffUL;
-			*base = dma_window[1];
-			*size = dma_window[2];
-			*io_page_size = 1 << dma_window[3];
-			of_node_put(dn);
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static unsigned long celleb_dma_direct_offset;
-
-static void __init celleb_init_direct_mapping(void)
-{
-	u64 lpar_addr, io_addr;
-	u64 io_space_id, ioid, dma_base, dma_size, io_page_size;
-
-	if (!find_dma_window(&io_space_id, &ioid, &dma_base, &dma_size,
-			     &io_page_size)) {
-		pr_info("No dma window found !\n");
-		return;
-	}
-
-	for (lpar_addr = 0; lpar_addr < dma_size; lpar_addr += io_page_size) {
-		io_addr = lpar_addr + dma_base;
-		(void)beat_put_iopte(io_space_id, io_addr, lpar_addr,
-				     ioid, DMA_FLAGS);
-	}
-
-	celleb_dma_direct_offset = dma_base;
-}
-
-static void celleb_dma_dev_setup(struct device *dev)
-{
-	set_dma_ops(dev, &dma_direct_ops);
-	set_dma_offset(dev, celleb_dma_direct_offset);
-}
-
-static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
-{
-	celleb_dma_dev_setup(&pdev->dev);
-}
-
-static int celleb_of_bus_notify(struct notifier_block *nb,
-				unsigned long action, void *data)
-{
-	struct device *dev = data;
-
-	/* We are only intereted in device addition */
-	if (action != BUS_NOTIFY_ADD_DEVICE)
-		return 0;
-
-	celleb_dma_dev_setup(dev);
-
-	return 0;
-}
-
-static struct notifier_block celleb_of_bus_notifier = {
-	.notifier_call = celleb_of_bus_notify
-};
-
-static int __init celleb_init_iommu(void)
-{
-	celleb_init_direct_mapping();
-	ppc_md.pci_dma_dev_setup = celleb_pci_dma_dev_setup;
-	bus_register_notifier(&platform_bus_type, &celleb_of_bus_notifier);
-
-	return 0;
-}
-
-machine_arch_initcall(celleb_beat, celleb_init_iommu);
diff --git a/arch/powerpc/platforms/cell/beat_spu_priv1.c b/arch/powerpc/platforms/cell/beat_spu_priv1.c
deleted file mode 100644
index 13f5258..0000000
--- a/arch/powerpc/platforms/cell/beat_spu_priv1.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * spu hypervisor abstraction for Beat
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <asm/types.h>
-#include <asm/spu.h>
-#include <asm/spu_priv1.h>
-
-#include "beat_wrapper.h"
-
-static inline void _int_mask_set(struct spu *spu, int class, u64 mask)
-{
-	spu->shadow_int_mask_RW[class] = mask;
-	beat_set_irq_mask_for_spe(spu->spe_id, class, mask);
-}
-
-static inline u64 _int_mask_get(struct spu *spu, int class)
-{
-	return spu->shadow_int_mask_RW[class];
-}
-
-static void int_mask_set(struct spu *spu, int class, u64 mask)
-{
-	_int_mask_set(spu, class, mask);
-}
-
-static u64 int_mask_get(struct spu *spu, int class)
-{
-	return _int_mask_get(spu, class);
-}
-
-static void int_mask_and(struct spu *spu, int class, u64 mask)
-{
-	u64 old_mask;
-	old_mask = _int_mask_get(spu, class);
-	_int_mask_set(spu, class, old_mask & mask);
-}
-
-static void int_mask_or(struct spu *spu, int class, u64 mask)
-{
-	u64 old_mask;
-	old_mask = _int_mask_get(spu, class);
-	_int_mask_set(spu, class, old_mask | mask);
-}
-
-static void int_stat_clear(struct spu *spu, int class, u64 stat)
-{
-	beat_clear_interrupt_status_of_spe(spu->spe_id, class, stat);
-}
-
-static u64 int_stat_get(struct spu *spu, int class)
-{
-	u64 int_stat;
-	beat_get_interrupt_status_of_spe(spu->spe_id, class, &int_stat);
-	return int_stat;
-}
-
-static void cpu_affinity_set(struct spu *spu, int cpu)
-{
-	return;
-}
-
-static u64 mfc_dar_get(struct spu *spu)
-{
-	u64 dar;
-	beat_get_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_dar_RW), &dar);
-	return dar;
-}
-
-static u64 mfc_dsisr_get(struct spu *spu)
-{
-	u64 dsisr;
-	beat_get_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_dsisr_RW), &dsisr);
-	return dsisr;
-}
-
-static void mfc_dsisr_set(struct spu *spu, u64 dsisr)
-{
-	beat_set_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_dsisr_RW), dsisr);
-}
-
-static void mfc_sdr_setup(struct spu *spu)
-{
-	return;
-}
-
-static void mfc_sr1_set(struct spu *spu, u64 sr1)
-{
-	beat_set_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_sr1_RW), sr1);
-}
-
-static u64 mfc_sr1_get(struct spu *spu)
-{
-	u64 sr1;
-	beat_get_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_sr1_RW), &sr1);
-	return sr1;
-}
-
-static void mfc_tclass_id_set(struct spu *spu, u64 tclass_id)
-{
-	beat_set_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_tclass_id_RW), tclass_id);
-}
-
-static u64 mfc_tclass_id_get(struct spu *spu)
-{
-	u64 tclass_id;
-	beat_get_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, mfc_tclass_id_RW), &tclass_id);
-	return tclass_id;
-}
-
-static void tlb_invalidate(struct spu *spu)
-{
-	beat_set_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, tlb_invalidate_entry_W), 0ul);
-}
-
-static void resource_allocation_groupID_set(struct spu *spu, u64 id)
-{
-	beat_set_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, resource_allocation_groupID_RW),
-		id);
-}
-
-static u64 resource_allocation_groupID_get(struct spu *spu)
-{
-	u64 id;
-	beat_get_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, resource_allocation_groupID_RW),
-		&id);
-	return id;
-}
-
-static void resource_allocation_enable_set(struct spu *spu, u64 enable)
-{
-	beat_set_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, resource_allocation_enable_RW),
-		enable);
-}
-
-static u64 resource_allocation_enable_get(struct spu *spu)
-{
-	u64 enable;
-	beat_get_spe_privileged_state_1_registers(
-		spu->spe_id,
-		offsetof(struct spu_priv1, resource_allocation_enable_RW),
-		&enable);
-	return enable;
-}
-
-const struct spu_priv1_ops spu_priv1_beat_ops = {
-	.int_mask_and = int_mask_and,
-	.int_mask_or = int_mask_or,
-	.int_mask_set = int_mask_set,
-	.int_mask_get = int_mask_get,
-	.int_stat_clear = int_stat_clear,
-	.int_stat_get = int_stat_get,
-	.cpu_affinity_set = cpu_affinity_set,
-	.mfc_dar_get = mfc_dar_get,
-	.mfc_dsisr_get = mfc_dsisr_get,
-	.mfc_dsisr_set = mfc_dsisr_set,
-	.mfc_sdr_setup = mfc_sdr_setup,
-	.mfc_sr1_set = mfc_sr1_set,
-	.mfc_sr1_get = mfc_sr1_get,
-	.mfc_tclass_id_set = mfc_tclass_id_set,
-	.mfc_tclass_id_get = mfc_tclass_id_get,
-	.tlb_invalidate = tlb_invalidate,
-	.resource_allocation_groupID_set = resource_allocation_groupID_set,
-	.resource_allocation_groupID_get = resource_allocation_groupID_get,
-	.resource_allocation_enable_set = resource_allocation_enable_set,
-	.resource_allocation_enable_get = resource_allocation_enable_get,
-};
diff --git a/arch/powerpc/platforms/cell/beat_syscall.h b/arch/powerpc/platforms/cell/beat_syscall.h
deleted file mode 100644
index 8580dc7..0000000
--- a/arch/powerpc/platforms/cell/beat_syscall.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Beat hypervisor call numbers
- *
- * (C) Copyright 2004-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef BEAT_BEAT_syscall_H
-#define BEAT_BEAT_syscall_H
-
-#ifdef	__ASSEMBLY__
-#define	__BEAT_ADD_VENDOR_ID(__x, __v)	((__v)<<60|(__x))
-#else
-#define	__BEAT_ADD_VENDOR_ID(__x, __v)	((u64)(__v)<<60|(__x))
-#endif
-#define HV_allocate_memory __BEAT_ADD_VENDOR_ID(0, 0)
-#define HV_construct_virtual_address_space __BEAT_ADD_VENDOR_ID(2, 0)
-#define HV_destruct_virtual_address_space __BEAT_ADD_VENDOR_ID(10, 0)
-#define HV_get_virtual_address_space_id_of_ppe __BEAT_ADD_VENDOR_ID(4, 0)
-#define HV_query_logical_partition_address_region_info 			\
-						__BEAT_ADD_VENDOR_ID(6, 0)
-#define HV_release_memory __BEAT_ADD_VENDOR_ID(13, 0)
-#define HV_select_virtual_address_space __BEAT_ADD_VENDOR_ID(7, 0)
-#define HV_load_range_registers __BEAT_ADD_VENDOR_ID(68, 0)
-#define HV_set_ppe_l2cache_rmt_entry __BEAT_ADD_VENDOR_ID(70, 0)
-#define HV_set_ppe_tlb_rmt_entry __BEAT_ADD_VENDOR_ID(71, 0)
-#define HV_set_spe_tlb_rmt_entry __BEAT_ADD_VENDOR_ID(72, 0)
-#define HV_get_io_address_translation_fault_info __BEAT_ADD_VENDOR_ID(14, 0)
-#define HV_get_iopte __BEAT_ADD_VENDOR_ID(16, 0)
-#define HV_preload_iopt_cache __BEAT_ADD_VENDOR_ID(17, 0)
-#define HV_put_iopte __BEAT_ADD_VENDOR_ID(15, 0)
-#define HV_connect_event_ports __BEAT_ADD_VENDOR_ID(21, 0)
-#define HV_construct_event_receive_port __BEAT_ADD_VENDOR_ID(18, 0)
-#define HV_destruct_event_receive_port __BEAT_ADD_VENDOR_ID(19, 0)
-#define HV_destruct_event_send_port __BEAT_ADD_VENDOR_ID(22, 0)
-#define HV_get_state_of_event_send_port __BEAT_ADD_VENDOR_ID(25, 0)
-#define HV_request_to_connect_event_ports __BEAT_ADD_VENDOR_ID(20, 0)
-#define HV_send_event_externally __BEAT_ADD_VENDOR_ID(23, 0)
-#define HV_send_event_locally __BEAT_ADD_VENDOR_ID(24, 0)
-#define HV_construct_and_connect_irq_plug __BEAT_ADD_VENDOR_ID(28, 0)
-#define HV_destruct_irq_plug __BEAT_ADD_VENDOR_ID(29, 0)
-#define HV_detect_pending_interrupts __BEAT_ADD_VENDOR_ID(26, 0)
-#define HV_end_of_interrupt __BEAT_ADD_VENDOR_ID(27, 0)
-#define HV_assign_control_signal_notification_port __BEAT_ADD_VENDOR_ID(45, 0)
-#define HV_end_of_control_signal_processing __BEAT_ADD_VENDOR_ID(48, 0)
-#define HV_get_control_signal __BEAT_ADD_VENDOR_ID(46, 0)
-#define HV_set_irq_mask_for_spe __BEAT_ADD_VENDOR_ID(61, 0)
-#define HV_shutdown_logical_partition __BEAT_ADD_VENDOR_ID(44, 0)
-#define HV_connect_message_ports __BEAT_ADD_VENDOR_ID(35, 0)
-#define HV_destruct_message_port __BEAT_ADD_VENDOR_ID(36, 0)
-#define HV_receive_message __BEAT_ADD_VENDOR_ID(37, 0)
-#define HV_get_message_port_info __BEAT_ADD_VENDOR_ID(34, 0)
-#define HV_request_to_connect_message_ports __BEAT_ADD_VENDOR_ID(33, 0)
-#define HV_send_message __BEAT_ADD_VENDOR_ID(32, 0)
-#define HV_get_logical_ppe_id __BEAT_ADD_VENDOR_ID(69, 0)
-#define HV_pause __BEAT_ADD_VENDOR_ID(9, 0)
-#define HV_destruct_shared_memory_handle __BEAT_ADD_VENDOR_ID(51, 0)
-#define HV_get_shared_memory_info __BEAT_ADD_VENDOR_ID(52, 0)
-#define HV_permit_sharing_memory __BEAT_ADD_VENDOR_ID(50, 0)
-#define HV_request_to_attach_shared_memory __BEAT_ADD_VENDOR_ID(49, 0)
-#define HV_enable_logical_spe_execution __BEAT_ADD_VENDOR_ID(55, 0)
-#define HV_construct_logical_spe __BEAT_ADD_VENDOR_ID(53, 0)
-#define HV_disable_logical_spe_execution __BEAT_ADD_VENDOR_ID(56, 0)
-#define HV_destruct_logical_spe __BEAT_ADD_VENDOR_ID(54, 0)
-#define HV_sense_spe_execution_status __BEAT_ADD_VENDOR_ID(58, 0)
-#define HV_insert_htab_entry __BEAT_ADD_VENDOR_ID(101, 0)
-#define HV_read_htab_entries __BEAT_ADD_VENDOR_ID(95, 0)
-#define HV_write_htab_entry __BEAT_ADD_VENDOR_ID(94, 0)
-#define HV_assign_io_address_translation_fault_port 			\
-						__BEAT_ADD_VENDOR_ID(100, 0)
-#define HV_set_interrupt_mask __BEAT_ADD_VENDOR_ID(73, 0)
-#define HV_get_logical_partition_id __BEAT_ADD_VENDOR_ID(74, 0)
-#define HV_create_repository_node2 __BEAT_ADD_VENDOR_ID(90, 0)
-#define HV_create_repository_node __BEAT_ADD_VENDOR_ID(90, 0) /* alias */
-#define HV_get_repository_node_value2 __BEAT_ADD_VENDOR_ID(91, 0)
-#define HV_get_repository_node_value __BEAT_ADD_VENDOR_ID(91, 0) /* alias */
-#define HV_modify_repository_node_value2 __BEAT_ADD_VENDOR_ID(92, 0)
-#define HV_modify_repository_node_value __BEAT_ADD_VENDOR_ID(92, 0) /* alias */
-#define HV_remove_repository_node2 __BEAT_ADD_VENDOR_ID(93, 0)
-#define HV_remove_repository_node __BEAT_ADD_VENDOR_ID(93, 0) /* alias */
-#define HV_cancel_shared_memory __BEAT_ADD_VENDOR_ID(104, 0)
-#define HV_clear_interrupt_status_of_spe __BEAT_ADD_VENDOR_ID(206, 0)
-#define HV_construct_spe_irq_outlet __BEAT_ADD_VENDOR_ID(80, 0)
-#define HV_destruct_spe_irq_outlet __BEAT_ADD_VENDOR_ID(81, 0)
-#define HV_disconnect_ipspc_service __BEAT_ADD_VENDOR_ID(88, 0)
-#define HV_execute_ipspc_command __BEAT_ADD_VENDOR_ID(86, 0)
-#define HV_get_interrupt_status_of_spe __BEAT_ADD_VENDOR_ID(205, 0)
-#define HV_get_spe_privileged_state_1_registers __BEAT_ADD_VENDOR_ID(208, 0)
-#define HV_permit_use_of_ipspc_service __BEAT_ADD_VENDOR_ID(85, 0)
-#define HV_reinitialize_logical_spe __BEAT_ADD_VENDOR_ID(82, 0)
-#define HV_request_ipspc_service __BEAT_ADD_VENDOR_ID(84, 0)
-#define HV_stop_ipspc_command __BEAT_ADD_VENDOR_ID(87, 0)
-#define HV_set_spe_privileged_state_1_registers __BEAT_ADD_VENDOR_ID(204, 0)
-#define HV_get_status_of_ipspc_service __BEAT_ADD_VENDOR_ID(203, 0)
-#define HV_put_characters_to_console __BEAT_ADD_VENDOR_ID(0x101, 1)
-#define HV_get_characters_from_console __BEAT_ADD_VENDOR_ID(0x102, 1)
-#define HV_get_base_clock __BEAT_ADD_VENDOR_ID(0x111, 1)
-#define HV_set_base_clock __BEAT_ADD_VENDOR_ID(0x112, 1)
-#define HV_get_frame_cycle __BEAT_ADD_VENDOR_ID(0x114, 1)
-#define HV_disable_console __BEAT_ADD_VENDOR_ID(0x115, 1)
-#define HV_disable_all_console __BEAT_ADD_VENDOR_ID(0x116, 1)
-#define HV_oneshot_timer __BEAT_ADD_VENDOR_ID(0x117, 1)
-#define HV_set_dabr __BEAT_ADD_VENDOR_ID(0x118, 1)
-#define HV_get_dabr __BEAT_ADD_VENDOR_ID(0x119, 1)
-#define HV_start_hv_stats __BEAT_ADD_VENDOR_ID(0x21c, 1)
-#define HV_stop_hv_stats __BEAT_ADD_VENDOR_ID(0x21d, 1)
-#define HV_get_hv_stats __BEAT_ADD_VENDOR_ID(0x21e, 1)
-#define HV_get_hv_error_stats __BEAT_ADD_VENDOR_ID(0x221, 1)
-#define HV_get_stats __BEAT_ADD_VENDOR_ID(0x224, 1)
-#define HV_get_heap_stats __BEAT_ADD_VENDOR_ID(0x225, 1)
-#define HV_get_memory_stats __BEAT_ADD_VENDOR_ID(0x227, 1)
-#define HV_get_memory_detail __BEAT_ADD_VENDOR_ID(0x228, 1)
-#define HV_set_priority_of_irq_outlet __BEAT_ADD_VENDOR_ID(0x122, 1)
-#define HV_get_physical_spe_by_reservation_id __BEAT_ADD_VENDOR_ID(0x128, 1)
-#define HV_get_spe_context __BEAT_ADD_VENDOR_ID(0x129, 1)
-#define HV_set_spe_context __BEAT_ADD_VENDOR_ID(0x12a, 1)
-#define HV_downcount_of_interrupt __BEAT_ADD_VENDOR_ID(0x12e, 1)
-#define HV_peek_spe_context __BEAT_ADD_VENDOR_ID(0x12f, 1)
-#define HV_read_bpa_register __BEAT_ADD_VENDOR_ID(0x131, 1)
-#define HV_write_bpa_register __BEAT_ADD_VENDOR_ID(0x132, 1)
-#define HV_map_context_table_of_spe __BEAT_ADD_VENDOR_ID(0x137, 1)
-#define HV_get_slb_for_logical_spe __BEAT_ADD_VENDOR_ID(0x138, 1)
-#define HV_set_slb_for_logical_spe __BEAT_ADD_VENDOR_ID(0x139, 1)
-#define HV_init_pm __BEAT_ADD_VENDOR_ID(0x150, 1)
-#define HV_set_pm_signal __BEAT_ADD_VENDOR_ID(0x151, 1)
-#define HV_get_pm_signal __BEAT_ADD_VENDOR_ID(0x152, 1)
-#define HV_set_pm_config __BEAT_ADD_VENDOR_ID(0x153, 1)
-#define HV_get_pm_config __BEAT_ADD_VENDOR_ID(0x154, 1)
-#define HV_get_inner_trace_data __BEAT_ADD_VENDOR_ID(0x155, 1)
-#define HV_set_ext_trace_buffer __BEAT_ADD_VENDOR_ID(0x156, 1)
-#define HV_get_ext_trace_buffer __BEAT_ADD_VENDOR_ID(0x157, 1)
-#define HV_set_pm_interrupt __BEAT_ADD_VENDOR_ID(0x158, 1)
-#define HV_get_pm_interrupt __BEAT_ADD_VENDOR_ID(0x159, 1)
-#define HV_kick_pm __BEAT_ADD_VENDOR_ID(0x160, 1)
-#define HV_construct_pm_context __BEAT_ADD_VENDOR_ID(0x164, 1)
-#define HV_destruct_pm_context __BEAT_ADD_VENDOR_ID(0x165, 1)
-#define HV_be_slow __BEAT_ADD_VENDOR_ID(0x170, 1)
-#define HV_assign_ipspc_server_connection_status_notification_port 	\
-						__BEAT_ADD_VENDOR_ID(0x173, 1)
-#define HV_get_raid_of_physical_spe __BEAT_ADD_VENDOR_ID(0x174, 1)
-#define HV_set_physical_spe_to_rag __BEAT_ADD_VENDOR_ID(0x175, 1)
-#define HV_release_physical_spe_from_rag __BEAT_ADD_VENDOR_ID(0x176, 1)
-#define HV_rtc_read __BEAT_ADD_VENDOR_ID(0x190, 1)
-#define HV_rtc_write __BEAT_ADD_VENDOR_ID(0x191, 1)
-#define HV_eeprom_read __BEAT_ADD_VENDOR_ID(0x192, 1)
-#define HV_eeprom_write __BEAT_ADD_VENDOR_ID(0x193, 1)
-#define HV_insert_htab_entry3 __BEAT_ADD_VENDOR_ID(0x104, 1)
-#define HV_invalidate_htab_entry3 __BEAT_ADD_VENDOR_ID(0x105, 1)
-#define HV_update_htab_permission3 __BEAT_ADD_VENDOR_ID(0x106, 1)
-#define HV_clear_htab3 __BEAT_ADD_VENDOR_ID(0x107, 1)
-#endif
diff --git a/arch/powerpc/platforms/cell/beat_udbg.c b/arch/powerpc/platforms/cell/beat_udbg.c
deleted file mode 100644
index 350735b..0000000
--- a/arch/powerpc/platforms/cell/beat_udbg.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * udbg function for Beat
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-
-#include "beat.h"
-
-#define	celleb_vtermno	0
-
-static void udbg_putc_beat(char c)
-{
-	unsigned long rc;
-
-	if (c == '\n')
-		udbg_putc_beat('\r');
-
-	rc = beat_put_term_char(celleb_vtermno, 1, (uint64_t)c << 56, 0);
-}
-
-/* Buffered chars getc */
-static u64 inbuflen;
-static u64 inbuf[2];	/* must be 2 u64s */
-
-static int udbg_getc_poll_beat(void)
-{
-	/* The interface is tricky because it may return up to 16 chars.
-	 * We save them statically for future calls to udbg_getc().
-	 */
-	char ch, *buf = (char *)inbuf;
-	int i;
-	long rc;
-	if (inbuflen == 0) {
-		/* get some more chars. */
-		inbuflen = 0;
-		rc = beat_get_term_char(celleb_vtermno, &inbuflen,
-					inbuf+0, inbuf+1);
-		if (rc != 0)
-			inbuflen = 0;	/* otherwise inbuflen is garbage */
-	}
-	if (inbuflen <= 0 || inbuflen > 16) {
-		/* Catch error case as well as other oddities (corruption) */
-		inbuflen = 0;
-		return -1;
-	}
-	ch = buf[0];
-	for (i = 1; i < inbuflen; i++)	/* shuffle them down. */
-		buf[i-1] = buf[i];
-	inbuflen--;
-	return ch;
-}
-
-static int udbg_getc_beat(void)
-{
-	int ch;
-	for (;;) {
-		ch = udbg_getc_poll_beat();
-		if (ch == -1) {
-			/* This shouldn't be needed...but... */
-			volatile unsigned long delay;
-			for (delay = 0; delay < 2000000; delay++)
-				;
-		} else {
-			return ch;
-		}
-	}
-}
-
-/* call this from early_init() for a working debug console on
- * vterm capable LPAR machines
- */
-void __init udbg_init_debug_beat(void)
-{
-	udbg_putc = udbg_putc_beat;
-	udbg_getc = udbg_getc_beat;
-	udbg_getc_poll = udbg_getc_poll_beat;
-}
diff --git a/arch/powerpc/platforms/cell/beat_wrapper.h b/arch/powerpc/platforms/cell/beat_wrapper.h
deleted file mode 100644
index c110996..0000000
--- a/arch/powerpc/platforms/cell/beat_wrapper.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Beat hypervisor call I/F
- *
- * (C) Copyright 2007 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/pseries/plpar_wrapper.h.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#ifndef BEAT_HCALL
-#include <linux/string.h>
-#include "beat_syscall.h"
-
-/* defined in hvCall.S */
-extern s64 beat_hcall_norets(u64 opcode, ...);
-extern s64 beat_hcall_norets8(u64 opcode, u64 arg1, u64 arg2, u64 arg3,
-	u64 arg4, u64 arg5, u64 arg6, u64 arg7, u64 arg8);
-extern s64 beat_hcall1(u64 opcode, u64 retbuf[1], ...);
-extern s64 beat_hcall2(u64 opcode, u64 retbuf[2], ...);
-extern s64 beat_hcall3(u64 opcode, u64 retbuf[3], ...);
-extern s64 beat_hcall4(u64 opcode, u64 retbuf[4], ...);
-extern s64 beat_hcall5(u64 opcode, u64 retbuf[5], ...);
-extern s64 beat_hcall6(u64 opcode, u64 retbuf[6], ...);
-
-static inline s64 beat_downcount_of_interrupt(u64 plug_id)
-{
-	return beat_hcall_norets(HV_downcount_of_interrupt, plug_id);
-}
-
-static inline s64 beat_set_interrupt_mask(u64 index,
-	u64 val0, u64 val1, u64 val2, u64 val3)
-{
-	return beat_hcall_norets(HV_set_interrupt_mask, index,
-	       val0, val1, val2, val3);
-}
-
-static inline s64 beat_destruct_irq_plug(u64 plug_id)
-{
-	return beat_hcall_norets(HV_destruct_irq_plug, plug_id);
-}
-
-static inline s64 beat_construct_and_connect_irq_plug(u64 plug_id,
-	u64 outlet_id)
-{
-	return beat_hcall_norets(HV_construct_and_connect_irq_plug, plug_id,
-	       outlet_id);
-}
-
-static inline s64 beat_detect_pending_interrupts(u64 index, u64 *retbuf)
-{
-	return beat_hcall4(HV_detect_pending_interrupts, retbuf, index);
-}
-
-static inline s64 beat_pause(u64 style)
-{
-	return beat_hcall_norets(HV_pause, style);
-}
-
-static inline s64 beat_read_htab_entries(u64 htab_id, u64 index, u64 *retbuf)
-{
-	return beat_hcall5(HV_read_htab_entries, retbuf, htab_id, index);
-}
-
-static inline s64 beat_insert_htab_entry(u64 htab_id, u64 group,
-	u64 bitmask, u64 hpte_v, u64 hpte_r, u64 *slot)
-{
-	u64 dummy[3];
-	s64 ret;
-
-	ret = beat_hcall3(HV_insert_htab_entry, dummy, htab_id, group,
-		bitmask, hpte_v, hpte_r);
-	*slot = dummy[0];
-	return ret;
-}
-
-static inline s64 beat_write_htab_entry(u64 htab_id, u64 slot,
-	u64 hpte_v, u64 hpte_r, u64 mask_v, u64 mask_r,
-	u64 *ret_v, u64 *ret_r)
-{
-	u64 dummy[2];
-	s64 ret;
-
-	ret = beat_hcall2(HV_write_htab_entry, dummy, htab_id, slot,
-		hpte_v, hpte_r, mask_v, mask_r);
-	*ret_v = dummy[0];
-	*ret_r = dummy[1];
-	return ret;
-}
-
-static inline s64 beat_insert_htab_entry3(u64 htab_id, u64 group,
-	u64 hpte_v, u64 hpte_r, u64 mask_v, u64 value_v, u64 *slot)
-{
-	u64 dummy[1];
-	s64 ret;
-
-	ret = beat_hcall1(HV_insert_htab_entry3, dummy, htab_id, group,
-		hpte_v, hpte_r, mask_v, value_v);
-	*slot = dummy[0];
-	return ret;
-}
-
-static inline s64 beat_invalidate_htab_entry3(u64 htab_id, u64 group,
-	u64 va, u64 pss)
-{
-	return beat_hcall_norets(HV_invalidate_htab_entry3,
-		htab_id, group, va, pss);
-}
-
-static inline s64 beat_update_htab_permission3(u64 htab_id, u64 group,
-	u64 va, u64 pss, u64 ptel_mask, u64 ptel_value)
-{
-	return beat_hcall_norets(HV_update_htab_permission3,
-		htab_id, group, va, pss, ptel_mask, ptel_value);
-}
-
-static inline s64 beat_clear_htab3(u64 htab_id)
-{
-	return beat_hcall_norets(HV_clear_htab3, htab_id);
-}
-
-static inline void beat_shutdown_logical_partition(u64 code)
-{
-	(void)beat_hcall_norets(HV_shutdown_logical_partition, code);
-}
-
-static inline s64 beat_rtc_write(u64 time_from_epoch)
-{
-	return beat_hcall_norets(HV_rtc_write, time_from_epoch);
-}
-
-static inline s64 beat_rtc_read(u64 *time_from_epoch)
-{
-	u64 dummy[1];
-	s64 ret;
-
-	ret = beat_hcall1(HV_rtc_read, dummy);
-	*time_from_epoch = dummy[0];
-	return ret;
-}
-
-#define	BEAT_NVRW_CNT	(sizeof(u64) * 6)
-
-static inline s64 beat_eeprom_write(u64 index, u64 length, u8 *buffer)
-{
-	u64	b[6];
-
-	if (length > BEAT_NVRW_CNT)
-		return -1;
-	memcpy(b, buffer, sizeof(b));
-	return beat_hcall_norets8(HV_eeprom_write, index, length,
-		b[0], b[1], b[2], b[3], b[4], b[5]);
-}
-
-static inline s64 beat_eeprom_read(u64 index, u64 length, u8 *buffer)
-{
-	u64	b[6];
-	s64	ret;
-
-	if (length > BEAT_NVRW_CNT)
-		return -1;
-	ret = beat_hcall6(HV_eeprom_read, b, index, length);
-	memcpy(buffer, b, length);
-	return ret;
-}
-
-static inline s64 beat_set_dabr(u64 value, u64 style)
-{
-	return beat_hcall_norets(HV_set_dabr, value, style);
-}
-
-static inline s64 beat_get_characters_from_console(u64 termno, u64 *len,
-	u8 *buffer)
-{
-	u64 dummy[3];
-	s64 ret;
-
-	ret = beat_hcall3(HV_get_characters_from_console, dummy, termno, len);
-	*len = dummy[0];
-	memcpy(buffer, dummy + 1, *len);
-	return ret;
-}
-
-static inline s64 beat_put_characters_to_console(u64 termno, u64 len,
-	u8 *buffer)
-{
-	u64 b[2];
-
-	memcpy(b, buffer, len);
-	return beat_hcall_norets(HV_put_characters_to_console, termno, len,
-		b[0], b[1]);
-}
-
-static inline s64 beat_get_spe_privileged_state_1_registers(
-		u64 id, u64 offsetof, u64 *value)
-{
-	u64 dummy[1];
-	s64 ret;
-
-	ret = beat_hcall1(HV_get_spe_privileged_state_1_registers, dummy, id,
-		offsetof);
-	*value = dummy[0];
-	return ret;
-}
-
-static inline s64 beat_set_irq_mask_for_spe(u64 id, u64 class, u64 mask)
-{
-	return beat_hcall_norets(HV_set_irq_mask_for_spe, id, class, mask);
-}
-
-static inline s64 beat_clear_interrupt_status_of_spe(u64 id, u64 class,
-	u64 mask)
-{
-	return beat_hcall_norets(HV_clear_interrupt_status_of_spe,
-		id, class, mask);
-}
-
-static inline s64 beat_set_spe_privileged_state_1_registers(
-		u64 id, u64 offsetof, u64 value)
-{
-	return beat_hcall_norets(HV_set_spe_privileged_state_1_registers,
-		id, offsetof, value);
-}
-
-static inline s64 beat_get_interrupt_status_of_spe(u64 id, u64 class, u64 *val)
-{
-	u64 dummy[1];
-	s64 ret;
-
-	ret = beat_hcall1(HV_get_interrupt_status_of_spe, dummy, id, class);
-	*val = dummy[0];
-	return ret;
-}
-
-static inline s64 beat_put_iopte(u64 ioas_id, u64 io_addr, u64 real_addr,
-	u64 ioid, u64 flags)
-{
-	return beat_hcall_norets(HV_put_iopte, ioas_id, io_addr, real_addr,
-		ioid, flags);
-}
-
-static inline s64 beat_construct_event_receive_port(u64 *port)
-{
-	u64 dummy[1];
-	s64 ret;
-
-	ret = beat_hcall1(HV_construct_event_receive_port, dummy);
-	*port = dummy[0];
-	return ret;
-}
-
-static inline s64 beat_destruct_event_receive_port(u64 port)
-{
-	s64 ret;
-
-	ret = beat_hcall_norets(HV_destruct_event_receive_port, port);
-	return ret;
-}
-
-static inline s64 beat_create_repository_node(u64 path[4], u64 data[2])
-{
-	s64 ret;
-
-	ret = beat_hcall_norets(HV_create_repository_node2,
-		path[0], path[1], path[2], path[3], data[0], data[1]);
-	return ret;
-}
-
-static inline s64 beat_get_repository_node_value(u64 lpid, u64 path[4],
-	u64 data[2])
-{
-	s64 ret;
-
-	ret = beat_hcall2(HV_get_repository_node_value2, data,
-		lpid, path[0], path[1], path[2], path[3]);
-	return ret;
-}
-
-#endif
diff --git a/arch/powerpc/platforms/cell/cell.h b/arch/powerpc/platforms/cell/cell.h
new file mode 100644
index 0000000..ef143df
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cell.h
@@ -0,0 +1,24 @@
+/*
+ * Cell Platform common data structures
+ *
+ * Copyright 2015, Daniel Axtens, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef CELL_H
+#define CELL_H
+
+#include <asm/pci-bridge.h>
+
+extern struct pci_controller_ops cell_pci_controller_ops;
+
+#endif
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
deleted file mode 100644
index 3ce70de..0000000
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- * Support for PCI on Celleb platform.
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/kernel/rtas_pci.c:
- *  Copyright (C) 2001 Dave Engebretsen, IBM Corporation
- *  Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/pci_regs.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-
-#include "celleb_pci.h"
-
-#define MAX_PCI_DEVICES    32
-#define MAX_PCI_FUNCTIONS   8
-#define MAX_PCI_BASE_ADDRS  3 /* use 64 bit address */
-
-/* definition for fake pci configuration area for GbE, .... ,and etc. */
-
-struct celleb_pci_resource {
-	struct resource r[MAX_PCI_BASE_ADDRS];
-};
-
-struct celleb_pci_private {
-	unsigned char *fake_config[MAX_PCI_DEVICES][MAX_PCI_FUNCTIONS];
-	struct celleb_pci_resource *res[MAX_PCI_DEVICES][MAX_PCI_FUNCTIONS];
-};
-
-static inline u8 celleb_fake_config_readb(void *addr)
-{
-	u8 *p = addr;
-	return *p;
-}
-
-static inline u16 celleb_fake_config_readw(void *addr)
-{
-	__le16 *p = addr;
-	return le16_to_cpu(*p);
-}
-
-static inline u32 celleb_fake_config_readl(void *addr)
-{
-	__le32 *p = addr;
-	return le32_to_cpu(*p);
-}
-
-static inline void celleb_fake_config_writeb(u32 val, void *addr)
-{
-	u8 *p = addr;
-	*p = val;
-}
-
-static inline void celleb_fake_config_writew(u32 val, void *addr)
-{
-	__le16 val16;
-	__le16 *p = addr;
-	val16 = cpu_to_le16(val);
-	*p = val16;
-}
-
-static inline void celleb_fake_config_writel(u32 val, void *addr)
-{
-	__le32 val32;
-	__le32 *p = addr;
-	val32 = cpu_to_le32(val);
-	*p = val32;
-}
-
-static unsigned char *get_fake_config_start(struct pci_controller *hose,
-					    int devno, int fn)
-{
-	struct celleb_pci_private *private = hose->private_data;
-
-	if (private == NULL)
-		return NULL;
-
-	return private->fake_config[devno][fn];
-}
-
-static struct celleb_pci_resource *get_resource_start(
-				struct pci_controller *hose,
-				int devno, int fn)
-{
-	struct celleb_pci_private *private = hose->private_data;
-
-	if (private == NULL)
-		return NULL;
-
-	return private->res[devno][fn];
-}
-
-
-static void celleb_config_read_fake(unsigned char *config, int where,
-				    int size, u32 *val)
-{
-	char *p = config + where;
-
-	switch (size) {
-	case 1:
-		*val = celleb_fake_config_readb(p);
-		break;
-	case 2:
-		*val = celleb_fake_config_readw(p);
-		break;
-	case 4:
-		*val = celleb_fake_config_readl(p);
-		break;
-	}
-}
-
-static void celleb_config_write_fake(unsigned char *config, int where,
-				     int size, u32 val)
-{
-	char *p = config + where;
-
-	switch (size) {
-	case 1:
-		celleb_fake_config_writeb(val, p);
-		break;
-	case 2:
-		celleb_fake_config_writew(val, p);
-		break;
-	case 4:
-		celleb_fake_config_writel(val, p);
-		break;
-	}
-}
-
-static int celleb_fake_pci_read_config(struct pci_bus *bus,
-		unsigned int devfn, int where, int size, u32 *val)
-{
-	char *config;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	unsigned int devno = devfn >> 3;
-	unsigned int fn = devfn & 0x7;
-
-	/* allignment check */
-	BUG_ON(where % size);
-
-	pr_debug("    fake read: bus=0x%x, ", bus->number);
-	config = get_fake_config_start(hose, devno, fn);
-
-	pr_debug("devno=0x%x, where=0x%x, size=0x%x, ", devno, where, size);
-	if (!config) {
-		pr_debug("failed\n");
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	celleb_config_read_fake(config, where, size, val);
-	pr_debug("val=0x%x\n", *val);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int celleb_fake_pci_write_config(struct pci_bus *bus,
-		unsigned int devfn, int where, int size, u32 val)
-{
-	char *config;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	struct celleb_pci_resource *res;
-	unsigned int devno = devfn >> 3;
-	unsigned int fn = devfn & 0x7;
-
-	/* allignment check */
-	BUG_ON(where % size);
-
-	config = get_fake_config_start(hose, devno, fn);
-
-	if (!config)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (val == ~0) {
-		int i = (where - PCI_BASE_ADDRESS_0) >> 3;
-
-		switch (where) {
-		case PCI_BASE_ADDRESS_0:
-		case PCI_BASE_ADDRESS_2:
-			if (size != 4)
-				return PCIBIOS_DEVICE_NOT_FOUND;
-			res = get_resource_start(hose, devno, fn);
-			if (!res)
-				return PCIBIOS_DEVICE_NOT_FOUND;
-			celleb_config_write_fake(config, where, size,
-					(res->r[i].end - res->r[i].start));
-			return PCIBIOS_SUCCESSFUL;
-		case PCI_BASE_ADDRESS_1:
-		case PCI_BASE_ADDRESS_3:
-		case PCI_BASE_ADDRESS_4:
-		case PCI_BASE_ADDRESS_5:
-			break;
-		default:
-			break;
-		}
-	}
-
-	celleb_config_write_fake(config, where, size, val);
-	pr_debug("    fake write: where=%x, size=%d, val=%x\n",
-		 where, size, val);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops celleb_fake_pci_ops = {
-	.read = celleb_fake_pci_read_config,
-	.write = celleb_fake_pci_write_config,
-};
-
-static inline void celleb_setup_pci_base_addrs(struct pci_controller *hose,
-					unsigned int devno, unsigned int fn,
-					unsigned int num_base_addr)
-{
-	u32 val;
-	unsigned char *config;
-	struct celleb_pci_resource *res;
-
-	config = get_fake_config_start(hose, devno, fn);
-	res = get_resource_start(hose, devno, fn);
-
-	if (!config || !res)
-		return;
-
-	switch (num_base_addr) {
-	case 3:
-		val = (res->r[2].start & 0xfffffff0)
-		    | PCI_BASE_ADDRESS_MEM_TYPE_64;
-		celleb_config_write_fake(config, PCI_BASE_ADDRESS_4, 4, val);
-		val = res->r[2].start >> 32;
-		celleb_config_write_fake(config, PCI_BASE_ADDRESS_5, 4, val);
-		/* FALLTHROUGH */
-	case 2:
-		val = (res->r[1].start & 0xfffffff0)
-		    | PCI_BASE_ADDRESS_MEM_TYPE_64;
-		celleb_config_write_fake(config, PCI_BASE_ADDRESS_2, 4, val);
-		val = res->r[1].start >> 32;
-		celleb_config_write_fake(config, PCI_BASE_ADDRESS_3, 4, val);
-		/* FALLTHROUGH */
-	case 1:
-		val = (res->r[0].start & 0xfffffff0)
-		    | PCI_BASE_ADDRESS_MEM_TYPE_64;
-		celleb_config_write_fake(config, PCI_BASE_ADDRESS_0, 4, val);
-		val = res->r[0].start >> 32;
-		celleb_config_write_fake(config, PCI_BASE_ADDRESS_1, 4, val);
-		break;
-	}
-
-	val = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-	celleb_config_write_fake(config, PCI_COMMAND, 2, val);
-}
-
-static int __init celleb_setup_fake_pci_device(struct device_node *node,
-					       struct pci_controller *hose)
-{
-	unsigned int rlen;
-	int num_base_addr = 0;
-	u32 val;
-	const u32 *wi0, *wi1, *wi2, *wi3, *wi4;
-	unsigned int devno, fn;
-	struct celleb_pci_private *private = hose->private_data;
-	unsigned char **config = NULL;
-	struct celleb_pci_resource **res = NULL;
-	const char *name;
-	const unsigned long *li;
-	int size, result;
-
-	if (private == NULL) {
-		printk(KERN_ERR "PCI: "
-		       "memory space for pci controller is not assigned\n");
-		goto error;
-	}
-
-	name = of_get_property(node, "model", &rlen);
-	if (!name) {
-		printk(KERN_ERR "PCI: model property not found.\n");
-		goto error;
-	}
-
-	wi4 = of_get_property(node, "reg", &rlen);
-	if (wi4 == NULL)
-		goto error;
-
-	devno = ((wi4[0] >> 8) & 0xff) >> 3;
-	fn = (wi4[0] >> 8) & 0x7;
-
-	pr_debug("PCI: celleb_setup_fake_pci() %s devno=%x fn=%x\n", name,
-		 devno, fn);
-
-	size = 256;
-	config = &private->fake_config[devno][fn];
-	*config = zalloc_maybe_bootmem(size, GFP_KERNEL);
-	if (*config == NULL) {
-		printk(KERN_ERR "PCI: "
-		       "not enough memory for fake configuration space\n");
-		goto error;
-	}
-	pr_debug("PCI: fake config area assigned 0x%016lx\n",
-		 (unsigned long)*config);
-
-	size = sizeof(struct celleb_pci_resource);
-	res = &private->res[devno][fn];
-	*res = zalloc_maybe_bootmem(size, GFP_KERNEL);
-	if (*res == NULL) {
-		printk(KERN_ERR
-		       "PCI: not enough memory for resource data space\n");
-		goto error;
-	}
-	pr_debug("PCI: res assigned 0x%016lx\n", (unsigned long)*res);
-
-	wi0 = of_get_property(node, "device-id", NULL);
-	wi1 = of_get_property(node, "vendor-id", NULL);
-	wi2 = of_get_property(node, "class-code", NULL);
-	wi3 = of_get_property(node, "revision-id", NULL);
-	if (!wi0 || !wi1 || !wi2 || !wi3) {
-		printk(KERN_ERR "PCI: Missing device tree properties.\n");
-		goto error;
-	}
-
-	celleb_config_write_fake(*config, PCI_DEVICE_ID, 2, wi0[0] & 0xffff);
-	celleb_config_write_fake(*config, PCI_VENDOR_ID, 2, wi1[0] & 0xffff);
-	pr_debug("class-code = 0x%08x\n", wi2[0]);
-
-	celleb_config_write_fake(*config, PCI_CLASS_PROG, 1, wi2[0] & 0xff);
-	celleb_config_write_fake(*config, PCI_CLASS_DEVICE, 2,
-				 (wi2[0] >> 8) & 0xffff);
-	celleb_config_write_fake(*config, PCI_REVISION_ID, 1, wi3[0]);
-
-	while (num_base_addr < MAX_PCI_BASE_ADDRS) {
-		result = of_address_to_resource(node,
-				num_base_addr, &(*res)->r[num_base_addr]);
-		if (result)
-			break;
-		num_base_addr++;
-	}
-
-	celleb_setup_pci_base_addrs(hose, devno, fn, num_base_addr);
-
-	li = of_get_property(node, "interrupts", &rlen);
-	if (!li) {
-		printk(KERN_ERR "PCI: interrupts not found.\n");
-		goto error;
-	}
-	val = li[0];
-	celleb_config_write_fake(*config, PCI_INTERRUPT_PIN, 1, 1);
-	celleb_config_write_fake(*config, PCI_INTERRUPT_LINE, 1, val);
-
-#ifdef DEBUG
-	pr_debug("PCI: %s irq=%ld\n", name, li[0]);
-	for (i = 0; i < 6; i++) {
-		celleb_config_read_fake(*config,
-					PCI_BASE_ADDRESS_0 + 0x4 * i, 4,
-					&val);
-		pr_debug("PCI: %s fn=%d base_address_%d=0x%x\n",
-			 name, fn, i, val);
-	}
-#endif
-
-	celleb_config_write_fake(*config, PCI_HEADER_TYPE, 1,
-				 PCI_HEADER_TYPE_NORMAL);
-
-	return 0;
-
-error:
-	if (mem_init_done) {
-		if (config && *config)
-			kfree(*config);
-		if (res && *res)
-			kfree(*res);
-
-	} else {
-		if (config && *config) {
-			size = 256;
-			memblock_free(__pa(*config), size);
-		}
-		if (res && *res) {
-			size = sizeof(struct celleb_pci_resource);
-			memblock_free(__pa(*res), size);
-		}
-	}
-
-	return 1;
-}
-
-static int __init phb_set_bus_ranges(struct device_node *dev,
-				     struct pci_controller *phb)
-{
-	const int *bus_range;
-	unsigned int len;
-
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int))
-		return 1;
-
-	phb->first_busno = bus_range[0];
-	phb->last_busno = bus_range[1];
-
-	return 0;
-}
-
-static void __init celleb_alloc_private_mem(struct pci_controller *hose)
-{
-	hose->private_data =
-		zalloc_maybe_bootmem(sizeof(struct celleb_pci_private),
-			GFP_KERNEL);
-}
-
-static int __init celleb_setup_fake_pci(struct device_node *dev,
-					struct pci_controller *phb)
-{
-	struct device_node *node;
-
-	phb->ops = &celleb_fake_pci_ops;
-	celleb_alloc_private_mem(phb);
-
-	for (node = of_get_next_child(dev, NULL);
-	     node != NULL; node = of_get_next_child(dev, node))
-		celleb_setup_fake_pci_device(node, phb);
-
-	return 0;
-}
-
-static struct celleb_phb_spec celleb_fake_pci_spec __initdata = {
-	.setup = celleb_setup_fake_pci,
-};
-
-static const struct of_device_id celleb_phb_match[] __initconst = {
-	{
-		.name = "pci-pseudo",
-		.data = &celleb_fake_pci_spec,
-	}, {
-		.name = "epci",
-		.data = &celleb_epci_spec,
-	}, {
-		.name = "pcie",
-		.data = &celleb_pciex_spec,
-	}, {
-	},
-};
-
-int __init celleb_setup_phb(struct pci_controller *phb)
-{
-	struct device_node *dev = phb->dn;
-	const struct of_device_id *match;
-	const struct celleb_phb_spec *phb_spec;
-	int rc;
-
-	match = of_match_node(celleb_phb_match, dev);
-	if (!match)
-		return 1;
-
-	phb_set_bus_ranges(dev, phb);
-	phb->buid = 1;
-
-	phb_spec = match->data;
-	rc = (*phb_spec->setup)(dev, phb);
-	if (rc)
-		return 1;
-
-	if (phb_spec->ops)
-		iowa_register_bus(phb, phb_spec->ops,
-				  phb_spec->iowa_init,
-				  phb_spec->iowa_data);
-	return 0;
-}
-
-int celleb_pci_probe_mode(struct pci_bus *bus)
-{
-	return PCI_PROBE_DEVTREE;
-}
diff --git a/arch/powerpc/platforms/cell/celleb_pci.h b/arch/powerpc/platforms/cell/celleb_pci.h
deleted file mode 100644
index a801fcc..0000000
--- a/arch/powerpc/platforms/cell/celleb_pci.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * pci prototypes for Celleb platform
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _CELLEB_PCI_H
-#define _CELLEB_PCI_H
-
-#include <linux/pci.h>
-
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <asm/ppc-pci.h>
-#include <asm/io-workarounds.h>
-
-struct iowa_bus;
-
-struct celleb_phb_spec {
-	int (*setup)(struct device_node *, struct pci_controller *);
-	struct ppc_pci_io *ops;
-	int (*iowa_init)(struct iowa_bus *, void *);
-	void *iowa_data;
-};
-
-extern int celleb_setup_phb(struct pci_controller *);
-extern int celleb_pci_probe_mode(struct pci_bus *);
-
-extern struct celleb_phb_spec celleb_epci_spec;
-extern struct celleb_phb_spec celleb_pciex_spec;
-
-#endif /* _CELLEB_PCI_H */
diff --git a/arch/powerpc/platforms/cell/celleb_scc.h b/arch/powerpc/platforms/cell/celleb_scc.h
deleted file mode 100644
index b596a71..0000000
--- a/arch/powerpc/platforms/cell/celleb_scc.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * SCC (Super Companion Chip) definitions
- *
- * (C) Copyright 2004-2006 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _CELLEB_SCC_H
-#define _CELLEB_SCC_H
-
-#define PCI_VENDOR_ID_TOSHIBA_2                 0x102f
-#define PCI_DEVICE_ID_TOSHIBA_SCC_PCIEXC_BRIDGE 0x01b0
-#define PCI_DEVICE_ID_TOSHIBA_SCC_EPCI_BRIDGE   0x01b1
-#define PCI_DEVICE_ID_TOSHIBA_SCC_BRIDGE        0x01b2
-#define PCI_DEVICE_ID_TOSHIBA_SCC_GBE           0x01b3
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA           0x01b4
-#define PCI_DEVICE_ID_TOSHIBA_SCC_USB2          0x01b5
-#define PCI_DEVICE_ID_TOSHIBA_SCC_USB           0x01b6
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ENCDEC        0x01b7
-
-#define SCC_EPCI_REG            0x0000d000
-
-/* EPCI registers */
-#define SCC_EPCI_CNF10_REG      0x010
-#define SCC_EPCI_CNF14_REG      0x014
-#define SCC_EPCI_CNF18_REG      0x018
-#define SCC_EPCI_PVBAT          0x100
-#define SCC_EPCI_VPMBAT         0x104
-#define SCC_EPCI_VPIBAT         0x108
-#define SCC_EPCI_VCSR           0x110
-#define SCC_EPCI_VIENAB         0x114
-#define SCC_EPCI_VISTAT         0x118
-#define SCC_EPCI_VRDCOUNT       0x124
-#define SCC_EPCI_BAM0           0x12c
-#define SCC_EPCI_BAM1           0x134
-#define SCC_EPCI_BAM2           0x13c
-#define SCC_EPCI_IADR           0x164
-#define SCC_EPCI_CLKRST         0x800
-#define SCC_EPCI_INTSET         0x804
-#define SCC_EPCI_STATUS         0x808
-#define SCC_EPCI_ABTSET         0x80c
-#define SCC_EPCI_WATRP          0x810
-#define SCC_EPCI_DUMYRADR       0x814
-#define SCC_EPCI_SWRESP         0x818
-#define SCC_EPCI_CNTOPT         0x81c
-#define SCC_EPCI_ECMODE         0xf00
-#define SCC_EPCI_IOM_AC_NUM     5
-#define SCC_EPCI_IOM_ACTE(n)    (0xf10 + (n) * 4)
-#define SCC_EPCI_IOT_AC_NUM     4
-#define SCC_EPCI_IOT_ACTE(n)    (0xf30 + (n) * 4)
-#define SCC_EPCI_MAEA           0xf50
-#define SCC_EPCI_MAEC           0xf54
-#define SCC_EPCI_CKCTRL         0xff0
-
-/* bits for SCC_EPCI_VCSR */
-#define SCC_EPCI_VCSR_FRE       0x00020000
-#define SCC_EPCI_VCSR_FWE       0x00010000
-#define SCC_EPCI_VCSR_DR        0x00000400
-#define SCC_EPCI_VCSR_SR        0x00000008
-#define SCC_EPCI_VCSR_AT        0x00000004
-
-/* bits for SCC_EPCI_VIENAB/SCC_EPCI_VISTAT */
-#define SCC_EPCI_VISTAT_PMPE    0x00000008
-#define SCC_EPCI_VISTAT_PMFE    0x00000004
-#define SCC_EPCI_VISTAT_PRA     0x00000002
-#define SCC_EPCI_VISTAT_PRD     0x00000001
-#define SCC_EPCI_VISTAT_ALL     0x0000000f
-
-#define SCC_EPCI_VIENAB_PMPEE   0x00000008
-#define SCC_EPCI_VIENAB_PMFEE   0x00000004
-#define SCC_EPCI_VIENAB_PRA     0x00000002
-#define SCC_EPCI_VIENAB_PRD     0x00000001
-#define SCC_EPCI_VIENAB_ALL     0x0000000f
-
-/* bits for SCC_EPCI_CLKRST */
-#define SCC_EPCI_CLKRST_CKS_MASK 0x00030000
-#define SCC_EPCI_CLKRST_CKS_2   0x00000000
-#define SCC_EPCI_CLKRST_CKS_4   0x00010000
-#define SCC_EPCI_CLKRST_CKS_8   0x00020000
-#define SCC_EPCI_CLKRST_PCICRST 0x00000400
-#define SCC_EPCI_CLKRST_BC      0x00000200
-#define SCC_EPCI_CLKRST_PCIRST  0x00000100
-#define SCC_EPCI_CLKRST_PCKEN   0x00000001
-
-/* bits for SCC_EPCI_INTSET/SCC_EPCI_STATUS */
-#define SCC_EPCI_INT_2M         0x01000000
-#define SCC_EPCI_INT_RERR       0x00200000
-#define SCC_EPCI_INT_SERR       0x00100000
-#define SCC_EPCI_INT_PRTER      0x00080000
-#define SCC_EPCI_INT_SER        0x00040000
-#define SCC_EPCI_INT_PER        0x00020000
-#define SCC_EPCI_INT_PAI        0x00010000
-#define SCC_EPCI_INT_1M         0x00000100
-#define SCC_EPCI_INT_PME        0x00000010
-#define SCC_EPCI_INT_INTD       0x00000008
-#define SCC_EPCI_INT_INTC       0x00000004
-#define SCC_EPCI_INT_INTB       0x00000002
-#define SCC_EPCI_INT_INTA       0x00000001
-#define SCC_EPCI_INT_DEVINT     0x0000000f
-#define SCC_EPCI_INT_ALL        0x003f001f
-#define SCC_EPCI_INT_ALLERR     0x003f0000
-
-/* bits for SCC_EPCI_CKCTRL */
-#define SCC_EPCI_CKCTRL_CRST0   0x00010000
-#define SCC_EPCI_CKCTRL_CRST1   0x00020000
-#define SCC_EPCI_CKCTRL_OCLKEN  0x00000100
-#define SCC_EPCI_CKCTRL_LCLKEN  0x00000001
-
-#define SCC_EPCI_IDSEL_AD_TO_SLOT(ad)       ((ad) - 10)
-#define SCC_EPCI_MAX_DEVNU      SCC_EPCI_IDSEL_AD_TO_SLOT(32)
-
-/* bits for SCC_EPCI_CNTOPT */
-#define SCC_EPCI_CNTOPT_O2PMB   0x00000002
-
-/* SCC PCIEXC SMMIO registers */
-#define PEXCADRS		0x000
-#define PEXCWDATA		0x004
-#define PEXCRDATA		0x008
-#define PEXDADRS		0x010
-#define PEXDCMND		0x014
-#define PEXDWDATA		0x018
-#define PEXDRDATA		0x01c
-#define PEXREQID		0x020
-#define PEXTIDMAP		0x024
-#define PEXINTMASK		0x028
-#define PEXINTSTS		0x02c
-#define PEXAERRMASK		0x030
-#define PEXAERRSTS		0x034
-#define PEXPRERRMASK		0x040
-#define PEXPRERRSTS		0x044
-#define PEXPRERRID01		0x048
-#define PEXPRERRID23		0x04c
-#define PEXVDMASK		0x050
-#define PEXVDSTS		0x054
-#define PEXRCVCPLIDA		0x060
-#define PEXLENERRIDA		0x068
-#define PEXPHYPLLST		0x070
-#define PEXDMRDEN0		0x100
-#define PEXDMRDADR0		0x104
-#define PEXDMRDENX		0x110
-#define PEXDMRDADRX		0x114
-#define PEXECMODE		0xf00
-#define PEXMAEA(n)		(0xf50 + (8 * n))
-#define PEXMAEC(n)		(0xf54 + (8 * n))
-#define PEXCCRCTRL		0xff0
-
-/* SCC PCIEXC bits and shifts for PEXCADRS */
-#define PEXCADRS_BYTE_EN_SHIFT		20
-#define PEXCADRS_CMD_SHIFT		16
-#define PEXCADRS_CMD_READ		(0xa << PEXCADRS_CMD_SHIFT)
-#define PEXCADRS_CMD_WRITE		(0xb << PEXCADRS_CMD_SHIFT)
-
-/* SCC PCIEXC shifts for PEXDADRS */
-#define PEXDADRS_BUSNO_SHIFT		20
-#define PEXDADRS_DEVNO_SHIFT		15
-#define PEXDADRS_FUNCNO_SHIFT		12
-
-/* SCC PCIEXC bits and shifts for PEXDCMND */
-#define PEXDCMND_BYTE_EN_SHIFT		4
-#define PEXDCMND_IO_READ		0x2
-#define PEXDCMND_IO_WRITE		0x3
-#define PEXDCMND_CONFIG_READ		0xa
-#define PEXDCMND_CONFIG_WRITE		0xb
-
-/* SCC PCIEXC bits for PEXPHYPLLST */
-#define PEXPHYPLLST_PEXPHYAPLLST	0x00000001
-
-/* SCC PCIEXC bits for PEXECMODE */
-#define PEXECMODE_ALL_THROUGH		0x00000000
-#define PEXECMODE_ALL_8BIT		0x00550155
-#define PEXECMODE_ALL_16BIT		0x00aa02aa
-
-/* SCC PCIEXC bits for PEXCCRCTRL */
-#define PEXCCRCTRL_PEXIPCOREEN		0x00040000
-#define PEXCCRCTRL_PEXIPCONTEN		0x00020000
-#define PEXCCRCTRL_PEXPHYPLLEN		0x00010000
-#define PEXCCRCTRL_PCIEXCAOCKEN		0x00000100
-
-/* SCC PCIEXC port configuration registers */
-#define PEXTCERRCHK		0x21c
-#define PEXTAMAPB0		0x220
-#define PEXTAMAPL0		0x224
-#define PEXTAMAPB(n)		(PEXTAMAPB0 + 8 * (n))
-#define PEXTAMAPL(n)		(PEXTAMAPL0 + 8 * (n))
-#define PEXCHVC0P		0x500
-#define PEXCHVC0NP		0x504
-#define PEXCHVC0C		0x508
-#define PEXCDVC0P		0x50c
-#define PEXCDVC0NP		0x510
-#define PEXCDVC0C		0x514
-#define PEXCHVCXP		0x518
-#define PEXCHVCXNP		0x51c
-#define PEXCHVCXC		0x520
-#define PEXCDVCXP		0x524
-#define PEXCDVCXNP		0x528
-#define PEXCDVCXC		0x52c
-#define PEXCTTRG		0x530
-#define PEXTSCTRL		0x700
-#define PEXTSSTS		0x704
-#define PEXSKPCTRL		0x708
-
-/* UHC registers */
-#define SCC_UHC_CKRCTRL         0xff0
-#define SCC_UHC_ECMODE          0xf00
-
-/* bits for SCC_UHC_CKRCTRL */
-#define SCC_UHC_F48MCKLEN       0x00000001
-#define SCC_UHC_P_SUSPEND       0x00000002
-#define SCC_UHC_PHY_SUSPEND_SEL 0x00000004
-#define SCC_UHC_HCLKEN          0x00000100
-#define SCC_UHC_USBEN           0x00010000
-#define SCC_UHC_USBCEN          0x00020000
-#define SCC_UHC_PHYEN           0x00040000
-
-/* bits for SCC_UHC_ECMODE */
-#define SCC_UHC_ECMODE_BY_BYTE  0x00000555
-#define SCC_UHC_ECMODE_BY_WORD  0x00000aaa
-
-#endif /* _CELLEB_SCC_H */
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
deleted file mode 100644
index 9438bbe..0000000
--- a/arch/powerpc/platforms/cell/celleb_scc_epci.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * Support for SCC external PCI
- *
- * (C) Copyright 2004-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/pci_regs.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-
-#include "celleb_scc.h"
-#include "celleb_pci.h"
-
-#define MAX_PCI_DEVICES   32
-#define MAX_PCI_FUNCTIONS  8
-
-#define iob()  __asm__ __volatile__("eieio; sync":::"memory")
-
-static inline PCI_IO_ADDR celleb_epci_get_epci_base(
-					struct pci_controller *hose)
-{
-	/*
-	 * Note:
-	 * Celleb epci uses cfg_addr as a base address for
-	 * epci control registers.
-	 */
-
-	return hose->cfg_addr;
-}
-
-static inline PCI_IO_ADDR celleb_epci_get_epci_cfg(
-					struct pci_controller *hose)
-{
-	/*
-	 * Note:
-	 * Celleb epci uses cfg_data as a base address for
-	 * configuration area for epci devices.
-	 */
-
-	return hose->cfg_data;
-}
-
-static inline void clear_and_disable_master_abort_interrupt(
-					struct pci_controller *hose)
-{
-	PCI_IO_ADDR epci_base;
-	PCI_IO_ADDR reg;
-	epci_base = celleb_epci_get_epci_base(hose);
-	reg = epci_base + PCI_COMMAND;
-	out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16));
-}
-
-static int celleb_epci_check_abort(struct pci_controller *hose,
-				   PCI_IO_ADDR addr)
-{
-	PCI_IO_ADDR reg;
-	PCI_IO_ADDR epci_base;
-	u32 val;
-
-	iob();
-	epci_base = celleb_epci_get_epci_base(hose);
-
-	reg = epci_base + PCI_COMMAND;
-	val = in_be32(reg);
-
-	if (val & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		out_be32(reg,
-			 (val & 0xffff) | (PCI_STATUS_REC_MASTER_ABORT << 16));
-
-		/* clear PCI Controller error, FRE, PMFE */
-		reg = epci_base + SCC_EPCI_STATUS;
-		out_be32(reg, SCC_EPCI_INT_PAI);
-
-		reg = epci_base + SCC_EPCI_VCSR;
-		val = in_be32(reg) & 0xffff;
-		val |= SCC_EPCI_VCSR_FRE;
-		out_be32(reg, val);
-
-		reg = epci_base + SCC_EPCI_VISTAT;
-		out_be32(reg, SCC_EPCI_VISTAT_PMFE);
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus,
-		struct pci_controller *hose, unsigned int devfn, int where)
-{
-	PCI_IO_ADDR addr;
-
-	if (bus != hose->bus)
-		addr = celleb_epci_get_epci_cfg(hose) +
-		       (((bus->number & 0xff) << 16)
-			| ((devfn & 0xff) << 8)
-			| (where & 0xff)
-			| 0x01000000);
-	else
-		addr = celleb_epci_get_epci_cfg(hose) +
-		       (((devfn & 0xff) << 8) | (where & 0xff));
-
-	pr_debug("EPCI: config_addr = 0x%p\n", addr);
-
-	return addr;
-}
-
-static int celleb_epci_read_config(struct pci_bus *bus,
-			unsigned int devfn, int where, int size, u32 *val)
-{
-	PCI_IO_ADDR epci_base;
-	PCI_IO_ADDR addr;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	/* allignment check */
-	BUG_ON(where % size);
-
-	if (!celleb_epci_get_epci_cfg(hose))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (bus->number == hose->first_busno && devfn == 0) {
-		/* EPCI controller self */
-
-		epci_base = celleb_epci_get_epci_base(hose);
-		addr = epci_base + where;
-
-		switch (size) {
-		case 1:
-			*val = in_8(addr);
-			break;
-		case 2:
-			*val = in_be16(addr);
-			break;
-		case 4:
-			*val = in_be32(addr);
-			break;
-		default:
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-	} else {
-
-		clear_and_disable_master_abort_interrupt(hose);
-		addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
-
-		switch (size) {
-		case 1:
-			*val = in_8(addr);
-			break;
-		case 2:
-			*val = in_le16(addr);
-			break;
-		case 4:
-			*val = in_le32(addr);
-			break;
-		default:
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-	}
-
-	pr_debug("EPCI: "
-		 "addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
-		 addr, devfn, where, size, *val);
-
-	return celleb_epci_check_abort(hose, NULL);
-}
-
-static int celleb_epci_write_config(struct pci_bus *bus,
-			unsigned int devfn, int where, int size, u32 val)
-{
-	PCI_IO_ADDR epci_base;
-	PCI_IO_ADDR addr;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	/* allignment check */
-	BUG_ON(where % size);
-
-	if (!celleb_epci_get_epci_cfg(hose))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (bus->number == hose->first_busno && devfn == 0) {
-		/* EPCI controller self */
-
-		epci_base = celleb_epci_get_epci_base(hose);
-		addr = epci_base + where;
-
-		switch (size) {
-		case 1:
-			out_8(addr, val);
-			break;
-		case 2:
-			out_be16(addr, val);
-			break;
-		case 4:
-			out_be32(addr, val);
-			break;
-		default:
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-	} else {
-
-		clear_and_disable_master_abort_interrupt(hose);
-		addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
-
-		switch (size) {
-		case 1:
-			out_8(addr, val);
-			break;
-		case 2:
-			out_le16(addr, val);
-			break;
-		case 4:
-			out_le32(addr, val);
-			break;
-		default:
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-	}
-
-	return celleb_epci_check_abort(hose, addr);
-}
-
-struct pci_ops celleb_epci_ops = {
-	.read = celleb_epci_read_config,
-	.write = celleb_epci_write_config,
-};
-
-/* to be moved in FW */
-static int __init celleb_epci_init(struct pci_controller *hose)
-{
-	u32 val;
-	PCI_IO_ADDR reg;
-	PCI_IO_ADDR epci_base;
-	int hwres = 0;
-
-	epci_base = celleb_epci_get_epci_base(hose);
-
-	/* PCI core reset(Internal bus and PCI clock) */
-	reg = epci_base + SCC_EPCI_CKCTRL;
-	val = in_be32(reg);
-	if (val == 0x00030101)
-		hwres = 1;
-	else {
-		val &= ~(SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1);
-		out_be32(reg, val);
-
-		/* set PCI core clock */
-		val = in_be32(reg);
-		val |= (SCC_EPCI_CKCTRL_OCLKEN | SCC_EPCI_CKCTRL_LCLKEN);
-		out_be32(reg, val);
-
-		/* release PCI core reset (internal bus) */
-		val = in_be32(reg);
-		val |= SCC_EPCI_CKCTRL_CRST0;
-		out_be32(reg, val);
-
-		/* set PCI clock select */
-		reg = epci_base + SCC_EPCI_CLKRST;
-		val = in_be32(reg);
-		val &= ~SCC_EPCI_CLKRST_CKS_MASK;
-		val |= SCC_EPCI_CLKRST_CKS_2;
-		out_be32(reg, val);
-
-		/* set arbiter */
-		reg = epci_base + SCC_EPCI_ABTSET;
-		out_be32(reg, 0x0f1f001f);	/* temporary value */
-
-		/* buffer on */
-		reg = epci_base + SCC_EPCI_CLKRST;
-		val = in_be32(reg);
-		val |= SCC_EPCI_CLKRST_BC;
-		out_be32(reg, val);
-
-		/* PCI clock enable */
-		val = in_be32(reg);
-		val |= SCC_EPCI_CLKRST_PCKEN;
-		out_be32(reg, val);
-
-		/* release PCI core reset (all) */
-		reg = epci_base + SCC_EPCI_CKCTRL;
-		val = in_be32(reg);
-		val |= (SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1);
-		out_be32(reg, val);
-
-		/* set base translation registers. (already set by Beat) */
-
-		/* set base address masks. (already set by Beat) */
-	}
-
-	/* release interrupt masks and clear all interrupts */
-	reg = epci_base + SCC_EPCI_INTSET;
-	out_be32(reg, 0x013f011f);	/* all interrupts enable */
-	reg = epci_base + SCC_EPCI_VIENAB;
-	val = SCC_EPCI_VIENAB_PMPEE | SCC_EPCI_VIENAB_PMFEE;
-	out_be32(reg, val);
-	reg = epci_base + SCC_EPCI_STATUS;
-	out_be32(reg, 0xffffffff);
-	reg = epci_base + SCC_EPCI_VISTAT;
-	out_be32(reg, 0xffffffff);
-
-	/* disable PCI->IB address translation */
-	reg = epci_base + SCC_EPCI_VCSR;
-	val = in_be32(reg);
-	val &= ~(SCC_EPCI_VCSR_DR | SCC_EPCI_VCSR_AT);
-	out_be32(reg, val);
-
-	/* set base addresses. (no need to set?) */
-
-	/* memory space, bus master enable */
-	reg = epci_base + PCI_COMMAND;
-	val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-	out_be32(reg, val);
-
-	/* endian mode setup */
-	reg = epci_base + SCC_EPCI_ECMODE;
-	val = 0x00550155;
-	out_be32(reg, val);
-
-	/* set control option */
-	reg = epci_base + SCC_EPCI_CNTOPT;
-	val = in_be32(reg);
-	val |= SCC_EPCI_CNTOPT_O2PMB;
-	out_be32(reg, val);
-
-	/* XXX: temporay: set registers for address conversion setup */
-	reg = epci_base + SCC_EPCI_CNF10_REG;
-	out_be32(reg, 0x80000008);
-	reg = epci_base + SCC_EPCI_CNF14_REG;
-	out_be32(reg, 0x40000008);
-
-	reg = epci_base + SCC_EPCI_BAM0;
-	out_be32(reg, 0x80000000);
-	reg = epci_base + SCC_EPCI_BAM1;
-	out_be32(reg, 0xe0000000);
-
-	reg = epci_base + SCC_EPCI_PVBAT;
-	out_be32(reg, 0x80000000);
-
-	if (!hwres) {
-		/* release external PCI reset */
-		reg = epci_base + SCC_EPCI_CLKRST;
-		val = in_be32(reg);
-		val |= SCC_EPCI_CLKRST_PCIRST;
-		out_be32(reg, val);
-	}
-
-	return 0;
-}
-
-static int __init celleb_setup_epci(struct device_node *node,
-				    struct pci_controller *hose)
-{
-	struct resource r;
-
-	pr_debug("PCI: celleb_setup_epci()\n");
-
-	/*
-	 * Note:
-	 * Celleb epci uses cfg_addr and cfg_data member of
-	 * pci_controller structure in irregular way.
-	 *
-	 * cfg_addr is used to map for control registers of
-	 * celleb epci.
-	 *
-	 * cfg_data is used for configuration area of devices
-	 * on Celleb epci buses.
-	 */
-
-	if (of_address_to_resource(node, 0, &r))
-		goto error;
-	hose->cfg_addr = ioremap(r.start, resource_size(&r));
-	if (!hose->cfg_addr)
-		goto error;
-	pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n",
-		 r.start, (unsigned long)hose->cfg_addr, resource_size(&r));
-
-	if (of_address_to_resource(node, 2, &r))
-		goto error;
-	hose->cfg_data = ioremap(r.start, resource_size(&r));
-	if (!hose->cfg_data)
-		goto error;
-	pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n",
-		 r.start, (unsigned long)hose->cfg_data, resource_size(&r));
-
-	hose->ops = &celleb_epci_ops;
-	celleb_epci_init(hose);
-
-	return 0;
-
-error:
-	if (hose->cfg_addr)
-		iounmap(hose->cfg_addr);
-
-	if (hose->cfg_data)
-		iounmap(hose->cfg_data);
-	return 1;
-}
-
-struct celleb_phb_spec celleb_epci_spec __initdata = {
-	.setup = celleb_setup_epci,
-	.ops = &spiderpci_ops,
-	.iowa_init = &spiderpci_iowa_init,
-	.iowa_data = (void *)0,
-};
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
deleted file mode 100644
index 94170e4..0000000
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * Support for Celleb PCI-Express.
- *
- * (C) Copyright 2007-2008 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/iommu.h>
-#include <asm/byteorder.h>
-
-#include "celleb_scc.h"
-#include "celleb_pci.h"
-
-#define PEX_IN(base, off)	in_be32((void __iomem *)(base) + (off))
-#define PEX_OUT(base, off, data) out_be32((void __iomem *)(base) + (off), (data))
-
-static void scc_pciex_io_flush(struct iowa_bus *bus)
-{
-	(void)PEX_IN(bus->phb->cfg_addr, PEXDMRDEN0);
-}
-
-/*
- * Memory space access to device on PCIEX
- */
-#define PCIEX_MMIO_READ(name, ret)					\
-static ret scc_pciex_##name(const PCI_IO_ADDR addr)			\
-{									\
-	ret val = __do_##name(addr);					\
-	scc_pciex_io_flush(iowa_mem_find_bus(addr));			\
-	return val;							\
-}
-
-#define PCIEX_MMIO_READ_STR(name)					\
-static void scc_pciex_##name(const PCI_IO_ADDR addr, void *buf,		\
-			     unsigned long count)			\
-{									\
-	__do_##name(addr, buf, count);					\
-	scc_pciex_io_flush(iowa_mem_find_bus(addr));			\
-}
-
-PCIEX_MMIO_READ(readb, u8)
-PCIEX_MMIO_READ(readw, u16)
-PCIEX_MMIO_READ(readl, u32)
-PCIEX_MMIO_READ(readq, u64)
-PCIEX_MMIO_READ(readw_be, u16)
-PCIEX_MMIO_READ(readl_be, u32)
-PCIEX_MMIO_READ(readq_be, u64)
-PCIEX_MMIO_READ_STR(readsb)
-PCIEX_MMIO_READ_STR(readsw)
-PCIEX_MMIO_READ_STR(readsl)
-
-static void scc_pciex_memcpy_fromio(void *dest, const PCI_IO_ADDR src,
-				    unsigned long n)
-{
-	__do_memcpy_fromio(dest, src, n);
-	scc_pciex_io_flush(iowa_mem_find_bus(src));
-}
-
-/*
- * I/O port access to devices on PCIEX.
- */
-
-static inline unsigned long get_bus_address(struct pci_controller *phb,
-					    unsigned long port)
-{
-	return port - ((unsigned long)(phb->io_base_virt) - _IO_BASE);
-}
-
-static u32 scc_pciex_read_port(struct pci_controller *phb,
-			       unsigned long port, int size)
-{
-	unsigned int byte_enable;
-	unsigned int cmd, shift;
-	unsigned long addr;
-	u32 data, ret;
-
-	BUG_ON(((port & 0x3ul) + size) > 4);
-
-	addr = get_bus_address(phb, port);
-	shift = addr & 0x3ul;
-	byte_enable = ((1 << size) - 1) << shift;
-	cmd = PEXDCMND_IO_READ | (byte_enable << PEXDCMND_BYTE_EN_SHIFT);
-	PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul));
-	PEX_OUT(phb->cfg_addr, PEXDCMND, cmd);
-	data = PEX_IN(phb->cfg_addr, PEXDRDATA);
-	ret = (data >> (shift * 8)) & (0xFFFFFFFF >> ((4 - size) * 8));
-
-	pr_debug("PCIEX:PIO READ:port=0x%lx, addr=0x%lx, size=%d, be=%x,"
-		 " cmd=%x, data=%x, ret=%x\n", port, addr, size, byte_enable,
-		 cmd, data, ret);
-
-	return ret;
-}
-
-static void scc_pciex_write_port(struct pci_controller *phb,
-				 unsigned long port, int size, u32 val)
-{
-	unsigned int byte_enable;
-	unsigned int cmd, shift;
-	unsigned long addr;
-	u32 data;
-
-	BUG_ON(((port & 0x3ul) + size) > 4);
-
-	addr = get_bus_address(phb, port);
-	shift = addr & 0x3ul;
-	byte_enable = ((1 << size) - 1) << shift;
-	cmd = PEXDCMND_IO_WRITE | (byte_enable << PEXDCMND_BYTE_EN_SHIFT);
-	data = (val & (0xFFFFFFFF >> (4 - size) * 8)) << (shift * 8);
-	PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul));
-	PEX_OUT(phb->cfg_addr, PEXDCMND, cmd);
-	PEX_OUT(phb->cfg_addr, PEXDWDATA, data);
-
-	pr_debug("PCIEX:PIO WRITE:port=0x%lx, addr=%lx, size=%d, val=%x,"
-		 " be=%x, cmd=%x, data=%x\n", port, addr, size, val,
-		 byte_enable, cmd, data);
-}
-
-static u8 __scc_pciex_inb(struct pci_controller *phb, unsigned long port)
-{
-	return (u8)scc_pciex_read_port(phb, port, 1);
-}
-
-static u16 __scc_pciex_inw(struct pci_controller *phb, unsigned long port)
-{
-	u32 data;
-	if ((port & 0x3ul) < 3)
-		data = scc_pciex_read_port(phb, port, 2);
-	else {
-		u32 d1 = scc_pciex_read_port(phb, port, 1);
-		u32 d2 = scc_pciex_read_port(phb, port + 1, 1);
-		data = d1 | (d2 << 8);
-	}
-	return (u16)data;
-}
-
-static u32 __scc_pciex_inl(struct pci_controller *phb, unsigned long port)
-{
-	unsigned int mod = port & 0x3ul;
-	u32 data;
-	if (mod == 0)
-		data = scc_pciex_read_port(phb, port, 4);
-	else {
-		u32 d1 = scc_pciex_read_port(phb, port, 4 - mod);
-		u32 d2 = scc_pciex_read_port(phb, port + 1, mod);
-		data = d1 | (d2 << (mod * 8));
-	}
-	return data;
-}
-
-static void __scc_pciex_outb(struct pci_controller *phb,
-			     u8 val, unsigned long port)
-{
-	scc_pciex_write_port(phb, port, 1, (u32)val);
-}
-
-static void __scc_pciex_outw(struct pci_controller *phb,
-			     u16 val, unsigned long port)
-{
-	if ((port & 0x3ul) < 3)
-		scc_pciex_write_port(phb, port, 2, (u32)val);
-	else {
-		u32 d1 = val & 0x000000FF;
-		u32 d2 = (val & 0x0000FF00) >> 8;
-		scc_pciex_write_port(phb, port, 1, d1);
-		scc_pciex_write_port(phb, port + 1, 1, d2);
-	}
-}
-
-static void __scc_pciex_outl(struct pci_controller *phb,
-			     u32 val, unsigned long port)
-{
-	unsigned int mod = port & 0x3ul;
-	if (mod == 0)
-		scc_pciex_write_port(phb, port, 4, val);
-	else {
-		u32 d1 = val & (0xFFFFFFFFul >> (mod * 8));
-		u32 d2 = val >> ((4 - mod) * 8);
-		scc_pciex_write_port(phb, port, 4 - mod, d1);
-		scc_pciex_write_port(phb, port + 1, mod, d2);
-	}
-}
-
-#define PCIEX_PIO_FUNC(size, name)					\
-static u##size scc_pciex_in##name(unsigned long port)			\
-{									\
-	struct iowa_bus *bus = iowa_pio_find_bus(port);			\
-	u##size data = __scc_pciex_in##name(bus->phb, port);		\
-	scc_pciex_io_flush(bus);					\
-	return data;							\
-}									\
-static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
-{									\
-	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
-	__le##size *dst = b;						\
-	for (; c != 0; c--, dst++)					\
-		*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
-	scc_pciex_io_flush(bus);					\
-}									\
-static void scc_pciex_out##name(u##size val, unsigned long port)	\
-{									\
-	struct iowa_bus *bus = iowa_pio_find_bus(port);			\
-	__scc_pciex_out##name(bus->phb, val, port);			\
-}									\
-static void scc_pciex_outs##name(unsigned long p, const void *b,	\
-				 unsigned long c)			\
-{									\
-	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
-	const __le##size *src = b;					\
-	for (; c != 0; c--, src++)					\
-		__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
-}
-#define __le8 u8
-#define cpu_to_le8(x) (x)
-#define le8_to_cpu(x) (x)
-PCIEX_PIO_FUNC(8, b)
-PCIEX_PIO_FUNC(16, w)
-PCIEX_PIO_FUNC(32, l)
-
-static struct ppc_pci_io scc_pciex_ops = {
-	.readb = scc_pciex_readb,
-	.readw = scc_pciex_readw,
-	.readl = scc_pciex_readl,
-	.readq = scc_pciex_readq,
-	.readw_be = scc_pciex_readw_be,
-	.readl_be = scc_pciex_readl_be,
-	.readq_be = scc_pciex_readq_be,
-	.readsb = scc_pciex_readsb,
-	.readsw = scc_pciex_readsw,
-	.readsl = scc_pciex_readsl,
-	.memcpy_fromio = scc_pciex_memcpy_fromio,
-	.inb = scc_pciex_inb,
-	.inw = scc_pciex_inw,
-	.inl = scc_pciex_inl,
-	.outb = scc_pciex_outb,
-	.outw = scc_pciex_outw,
-	.outl = scc_pciex_outl,
-	.insb = scc_pciex_insb,
-	.insw = scc_pciex_insw,
-	.insl = scc_pciex_insl,
-	.outsb = scc_pciex_outsb,
-	.outsw = scc_pciex_outsw,
-	.outsl = scc_pciex_outsl,
-};
-
-static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
-{
-	dma_addr_t dummy_page_da;
-	void *dummy_page_va;
-
-	dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!dummy_page_va) {
-		pr_err("PCIEX:Alloc dummy_page_va failed\n");
-		return -1;
-	}
-
-	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
-				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
-		pr_err("PCIEX:Map dummy page failed.\n");
-		kfree(dummy_page_va);
-		return -1;
-	}
-
-	PEX_OUT(bus->phb->cfg_addr, PEXDMRDADR0, dummy_page_da);
-
-	return 0;
-}
-
-/*
- * config space access
- */
-#define MK_PEXDADRS(bus_no, dev_no, func_no, addr) \
-	((uint32_t)(((addr) & ~0x3UL) | \
-	((bus_no) << PEXDADRS_BUSNO_SHIFT) | \
-	((dev_no)  << PEXDADRS_DEVNO_SHIFT) | \
-	((func_no) << PEXDADRS_FUNCNO_SHIFT)))
-
-#define MK_PEXDCMND_BYTE_EN(addr, size) \
-	((((0x1 << (size))-1) << ((addr) & 0x3)) << PEXDCMND_BYTE_EN_SHIFT)
-#define MK_PEXDCMND(cmd, addr, size) ((cmd) | MK_PEXDCMND_BYTE_EN(addr, size))
-
-static uint32_t config_read_pciex_dev(unsigned int __iomem *base,
-		uint64_t bus_no, uint64_t dev_no, uint64_t func_no,
-		uint64_t off, uint64_t size)
-{
-	uint32_t ret;
-	uint32_t addr, cmd;
-
-	addr = MK_PEXDADRS(bus_no, dev_no, func_no, off);
-	cmd = MK_PEXDCMND(PEXDCMND_CONFIG_READ, off, size);
-	PEX_OUT(base, PEXDADRS, addr);
-	PEX_OUT(base, PEXDCMND, cmd);
-	ret = (PEX_IN(base, PEXDRDATA)
-		>> ((off & (4-size)) * 8)) & ((0x1 << (size * 8)) - 1);
-	return ret;
-}
-
-static void config_write_pciex_dev(unsigned int __iomem *base, uint64_t bus_no,
-	uint64_t dev_no, uint64_t func_no, uint64_t off, uint64_t size,
-	uint32_t data)
-{
-	uint32_t addr, cmd;
-
-	addr = MK_PEXDADRS(bus_no, dev_no, func_no, off);
-	cmd = MK_PEXDCMND(PEXDCMND_CONFIG_WRITE, off, size);
-	PEX_OUT(base, PEXDADRS, addr);
-	PEX_OUT(base, PEXDCMND, cmd);
-	PEX_OUT(base, PEXDWDATA,
-		(data & ((0x1 << (size * 8)) - 1)) << ((off & (4-size)) * 8));
-}
-
-#define MK_PEXCADRS_BYTE_EN(off, len) \
-	((((0x1 << (len)) - 1) << ((off) & 0x3)) << PEXCADRS_BYTE_EN_SHIFT)
-#define MK_PEXCADRS(cmd, addr, size) \
-	((cmd) | MK_PEXCADRS_BYTE_EN(addr, size) | ((addr) & ~0x3))
-static uint32_t config_read_pciex_rc(unsigned int __iomem *base,
-				     uint32_t where, uint32_t size)
-{
-	PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_READ, where, size));
-	return (PEX_IN(base, PEXCRDATA)
-		>> ((where & (4 - size)) * 8)) & ((0x1 << (size * 8)) - 1);
-}
-
-static void config_write_pciex_rc(unsigned int __iomem *base, uint32_t where,
-				  uint32_t size, uint32_t val)
-{
-	uint32_t data;
-
-	data = (val & ((0x1 << (size * 8)) - 1)) << ((where & (4 - size)) * 8);
-	PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_WRITE, where, size));
-	PEX_OUT(base, PEXCWDATA, data);
-}
-
-/* Interfaces */
-/* Note: Work-around
- *  On SCC PCIEXC, one device is seen on all 32 dev_no.
- *  As SCC PCIEXC can have only one device on the bus, we look only one dev_no.
- * (dev_no = 1)
- */
-static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, unsigned int *val)
-{
-	struct pci_controller *phb = pci_bus_to_host(bus);
-
-	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) {
-		*val = ~0;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	if (bus->number == 0 && PCI_SLOT(devfn) == 0)
-		*val = config_read_pciex_rc(phb->cfg_addr, where, size);
-	else
-		*val = config_read_pciex_dev(phb->cfg_addr, bus->number,
-				PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
-				  int where, int size, unsigned int val)
-{
-	struct pci_controller *phb = pci_bus_to_host(bus);
-
-	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (bus->number == 0 && PCI_SLOT(devfn) == 0)
-		config_write_pciex_rc(phb->cfg_addr, where, size, val);
-	else
-		config_write_pciex_dev(phb->cfg_addr, bus->number,
-			PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops scc_pciex_pci_ops = {
-	.read = scc_pciex_read_config,
-	.write = scc_pciex_write_config,
-};
-
-static void pciex_clear_intr_all(unsigned int __iomem *base)
-{
-	PEX_OUT(base, PEXAERRSTS, 0xffffffff);
-	PEX_OUT(base, PEXPRERRSTS, 0xffffffff);
-	PEX_OUT(base, PEXINTSTS, 0xffffffff);
-}
-
-#if 0
-static void pciex_disable_intr_all(unsigned int *base)
-{
-	PEX_OUT(base, PEXINTMASK,   0x0);
-	PEX_OUT(base, PEXAERRMASK,  0x0);
-	PEX_OUT(base, PEXPRERRMASK, 0x0);
-	PEX_OUT(base, PEXVDMASK,    0x0);
-}
-#endif
-
-static void pciex_enable_intr_all(unsigned int __iomem *base)
-{
-	PEX_OUT(base, PEXINTMASK, 0x0000e7f1);
-	PEX_OUT(base, PEXAERRMASK, 0x03ff01ff);
-	PEX_OUT(base, PEXPRERRMASK, 0x0001010f);
-	PEX_OUT(base, PEXVDMASK, 0x00000001);
-}
-
-static void pciex_check_status(unsigned int __iomem *base)
-{
-	uint32_t err = 0;
-	uint32_t intsts, aerr, prerr, rcvcp, lenerr;
-	uint32_t maea, maec;
-
-	intsts = PEX_IN(base, PEXINTSTS);
-	aerr = PEX_IN(base, PEXAERRSTS);
-	prerr = PEX_IN(base, PEXPRERRSTS);
-	rcvcp = PEX_IN(base, PEXRCVCPLIDA);
-	lenerr = PEX_IN(base, PEXLENERRIDA);
-
-	if (intsts || aerr || prerr || rcvcp || lenerr)
-		err = 1;
-
-	pr_info("PCEXC interrupt!!\n");
-	pr_info("PEXINTSTS    :0x%08x\n", intsts);
-	pr_info("PEXAERRSTS   :0x%08x\n", aerr);
-	pr_info("PEXPRERRSTS  :0x%08x\n", prerr);
-	pr_info("PEXRCVCPLIDA :0x%08x\n", rcvcp);
-	pr_info("PEXLENERRIDA :0x%08x\n", lenerr);
-
-	/* print detail of Protection Error */
-	if (intsts & 0x00004000) {
-		uint32_t i, n;
-		for (i = 0; i < 4; i++) {
-			n = 1 << i;
-			if (prerr & n) {
-				maea = PEX_IN(base, PEXMAEA(i));
-				maec = PEX_IN(base, PEXMAEC(i));
-				pr_info("PEXMAEC%d     :0x%08x\n", i, maec);
-				pr_info("PEXMAEA%d     :0x%08x\n", i, maea);
-			}
-		}
-	}
-
-	if (err)
-		pciex_clear_intr_all(base);
-}
-
-static irqreturn_t pciex_handle_internal_irq(int irq, void *dev_id)
-{
-	struct pci_controller *phb = dev_id;
-
-	pr_debug("PCIEX:pciex_handle_internal_irq(irq=%d)\n", irq);
-
-	BUG_ON(phb->cfg_addr == NULL);
-
-	pciex_check_status(phb->cfg_addr);
-
-	return IRQ_HANDLED;
-}
-
-static __init int celleb_setup_pciex(struct device_node *node,
-				     struct pci_controller *phb)
-{
-	struct resource	r;
-	int virq;
-
-	/* SMMIO registers; used inside this file */
-	if (of_address_to_resource(node, 0, &r)) {
-		pr_err("PCIEXC:Failed to get config resource.\n");
-		return 1;
-	}
-	phb->cfg_addr = ioremap(r.start, resource_size(&r));
-	if (!phb->cfg_addr) {
-		pr_err("PCIEXC:Failed to remap SMMIO region.\n");
-		return 1;
-	}
-
-	/* Not use cfg_data,  cmd and data regs are near address reg */
-	phb->cfg_data = NULL;
-
-	/* set pci_ops */
-	phb->ops = &scc_pciex_pci_ops;
-
-	/* internal interrupt handler */
-	virq = irq_of_parse_and_map(node, 1);
-	if (!virq) {
-		pr_err("PCIEXC:Failed to map irq\n");
-		goto error;
-	}
-	if (request_irq(virq, pciex_handle_internal_irq,
-			0, "pciex", (void *)phb)) {
-		pr_err("PCIEXC:Failed to request irq\n");
-		goto error;
-	}
-
-	/* enable all interrupts */
-	pciex_clear_intr_all(phb->cfg_addr);
-	pciex_enable_intr_all(phb->cfg_addr);
-	/* MSI: TBD */
-
-	return 0;
-
-error:
-	phb->cfg_data = NULL;
-	if (phb->cfg_addr)
-		iounmap(phb->cfg_addr);
-	phb->cfg_addr = NULL;
-	return 1;
-}
-
-struct celleb_phb_spec celleb_pciex_spec __initdata = {
-	.setup = celleb_setup_pciex,
-	.ops = &scc_pciex_ops,
-	.iowa_init = &scc_pciex_iowa_init,
-};
diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c
deleted file mode 100644
index c8eb571..0000000
--- a/arch/powerpc/platforms/cell/celleb_scc_sio.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * setup serial port in SCC
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-
-/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
-    mmio=0xfff000-0x1000,0xff2000-0x1000 */
-static int txx9_serial_bitmap __initdata;
-
-static struct {
-	uint32_t offset;
-	uint32_t index;
-} txx9_scc_tab[3] __initdata = {
-	{ 0x300, 0 },	/* 0xFFF300 */
-	{ 0x400, 0 },	/* 0xFFF400 */
-	{ 0x800, 1 }	/* 0xFF2800 */
-};
-
-static int __init txx9_serial_init(void)
-{
-	extern int early_serial_txx9_setup(struct uart_port *port);
-	struct device_node *node;
-	int i;
-	struct uart_port req;
-	struct of_phandle_args irq;
-	struct resource res;
-
-	for_each_compatible_node(node, "serial", "toshiba,sio-scc") {
-		for (i = 0; i < ARRAY_SIZE(txx9_scc_tab); i++) {
-			if (!(txx9_serial_bitmap & (1<<i)))
-				continue;
-
-			if (of_irq_parse_one(node, i, &irq))
-				continue;
-			if (of_address_to_resource(node,
-				txx9_scc_tab[i].index, &res))
-				continue;
-
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.mapbase = res.start + txx9_scc_tab[i].offset;
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-			req.membase = ioremap(req.mapbase, 0x24);
-#endif
-			req.irq = irq_create_of_mapping(&irq);
-			req.flags |= UPF_IOREMAP | UPF_BUGGY_UART
-				/*HAVE_CTS_LINE*/;
-			req.uartclk = 83300000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-
-	return 0;
-}
-
-static int __init txx9_serial_config(char *ptr)
-{
-	int	i;
-
-	for (;;) {
-		switch (get_option(&ptr, &i)) {
-		default:
-			return 0;
-		case 2:
-			txx9_serial_bitmap |= 1 << i;
-			break;
-		case 1:
-			txx9_serial_bitmap |= 1 << i;
-			return 0;
-		}
-	}
-}
-__setup("txx9_serial=", txx9_serial_config);
-
-console_initcall(txx9_serial_init);
diff --git a/arch/powerpc/platforms/cell/celleb_scc_uhc.c b/arch/powerpc/platforms/cell/celleb_scc_uhc.c
deleted file mode 100644
index d63b720..0000000
--- a/arch/powerpc/platforms/cell/celleb_scc_uhc.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * SCC (Super Companion Chip) UHC setup
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include "celleb_scc.h"
-
-#define UHC_RESET_WAIT_MAX 10000
-
-static inline int uhc_clkctrl_ready(u32 val)
-{
-	const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN;
-	return((val & mask) == mask);
-}
-
-/*
- * UHC(usb host controller) enable function.
- * affect to both of OHCI and EHCI core module.
- */
-static void enable_scc_uhc(struct pci_dev *dev)
-{
-	void __iomem *uhc_base;
-	u32 __iomem *uhc_clkctrl;
-	u32 __iomem *uhc_ecmode;
-	u32 val = 0;
-	int i;
-
-	if (!machine_is(celleb_beat) &&
-	    !machine_is(celleb_native))
-		return;
-
-	uhc_base = ioremap(pci_resource_start(dev, 0),
-			   pci_resource_len(dev, 0));
-	if (!uhc_base) {
-		printk(KERN_ERR "failed to map UHC register base.\n");
-		return;
-	}
-	uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL;
-	uhc_ecmode  = uhc_base + SCC_UHC_ECMODE;
-
-	/* setup for normal mode */
-	val |= SCC_UHC_F48MCKLEN;
-	out_be32(uhc_clkctrl, val);
-	val |= SCC_UHC_PHY_SUSPEND_SEL;
-	out_be32(uhc_clkctrl, val);
-	udelay(10);
-	val |= SCC_UHC_PHYEN;
-	out_be32(uhc_clkctrl, val);
-	udelay(50);
-
-	/* disable reset */
-	val |= SCC_UHC_HCLKEN;
-	out_be32(uhc_clkctrl, val);
-	val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN);
-	out_be32(uhc_clkctrl, val);
-	i = 0;
-	while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) {
-		udelay(10);
-		if (i++ > UHC_RESET_WAIT_MAX) {
-			printk(KERN_ERR "Failed to disable UHC reset %x\n",
-			       in_be32(uhc_clkctrl));
-			break;
-		}
-	}
-
-	/* Endian Conversion Mode for Master ALL area */
-	out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE);
-
-	iounmap(uhc_base);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
-		 PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc);
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
deleted file mode 100644
index 90be8ec..0000000
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Celleb setup code
- *
- * (C) Copyright 2006-2007 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/cell/setup.c:
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified by PPC64 Team, IBM Corp
- *  Modified by Cell Team, IBM Deutschland Entwicklung GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/cpu.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/console.h>
-#include <linux/of_platform.h>
-
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/cputable.h>
-#include <asm/irq.h>
-#include <asm/time.h>
-#include <asm/spu_priv1.h>
-#include <asm/firmware.h>
-#include <asm/rtas.h>
-#include <asm/cell-regs.h>
-
-#include "beat_interrupt.h"
-#include "beat_wrapper.h"
-#include "beat.h"
-#include "celleb_pci.h"
-#include "interrupt.h"
-#include "pervasive.h"
-#include "ras.h"
-
-static char celleb_machine_type[128] = "Celleb";
-
-static void celleb_show_cpuinfo(struct seq_file *m)
-{
-	struct device_node *root;
-	const char *model = "";
-
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	/* using "CHRP" is to trick anaconda into installing FCx into Celleb */
-	seq_printf(m, "machine\t\t: %s %s\n", celleb_machine_type, model);
-	of_node_put(root);
-}
-
-static int __init celleb_machine_type_hack(char *ptr)
-{
-	strlcpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
-	return 0;
-}
-
-__setup("celleb_machine_type_hack=", celleb_machine_type_hack);
-
-static void celleb_progress(char *s, unsigned short hex)
-{
-	printk("*** %04x : %s\n", hex, s ? s : "");
-}
-
-static void __init celleb_setup_arch_common(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-}
-
-static const struct of_device_id celleb_bus_ids[] __initconst = {
-	{ .type = "scc", },
-	{ .type = "ioif", },	/* old style */
-	{},
-};
-
-static int __init celleb_publish_devices(void)
-{
-	/* Publish OF platform devices for southbridge IOs */
-	of_platform_bus_probe(NULL, celleb_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(celleb_beat, celleb_publish_devices);
-machine_device_initcall(celleb_native, celleb_publish_devices);
-
-
-/*
- * functions for Celleb-Beat
- */
-static void __init celleb_setup_arch_beat(void)
-{
-#ifdef CONFIG_SPU_BASE
-	spu_priv1_ops		= &spu_priv1_beat_ops;
-	spu_management_ops	= &spu_management_of_ops;
-#endif
-
-	celleb_setup_arch_common();
-}
-
-static int __init celleb_probe_beat(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "Beat"))
-		return 0;
-
-	powerpc_firmware_features |= FW_FEATURE_CELLEB_ALWAYS
-		| FW_FEATURE_BEAT | FW_FEATURE_LPAR;
-	hpte_init_beat_v3();
-	pm_power_off = beat_power_off;
-
-	return 1;
-}
-
-
-/*
- * functions for Celleb-native
- */
-static void __init celleb_init_IRQ_native(void)
-{
-	iic_init_IRQ();
-	spider_init_IRQ();
-}
-
-static void __init celleb_setup_arch_native(void)
-{
-#ifdef CONFIG_SPU_BASE
-	spu_priv1_ops		= &spu_priv1_mmio_ops;
-	spu_management_ops	= &spu_management_of_ops;
-#endif
-
-	cbe_regs_init();
-
-#ifdef CONFIG_CBE_RAS
-	cbe_ras_init();
-#endif
-
-#ifdef CONFIG_SMP
-	smp_init_cell();
-#endif
-
-	cbe_pervasive_init();
-
-	/* XXX: nvram initialization should be added */
-
-	celleb_setup_arch_common();
-}
-
-static int __init celleb_probe_native(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (of_flat_dt_is_compatible(root, "Beat") ||
-	    !of_flat_dt_is_compatible(root, "TOSHIBA,Celleb"))
-		return 0;
-
-	powerpc_firmware_features |= FW_FEATURE_CELLEB_ALWAYS;
-	hpte_init_native();
-	pm_power_off = rtas_power_off;
-
-	return 1;
-}
-
-
-/*
- * machine definitions
- */
-define_machine(celleb_beat) {
-	.name			= "Cell Reference Set (Beat)",
-	.probe			= celleb_probe_beat,
-	.setup_arch		= celleb_setup_arch_beat,
-	.show_cpuinfo		= celleb_show_cpuinfo,
-	.restart		= beat_restart,
-	.halt			= beat_halt,
-	.get_rtc_time		= beat_get_rtc_time,
-	.set_rtc_time		= beat_set_rtc_time,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= celleb_progress,
-	.power_save		= beat_power_save,
-	.nvram_size		= beat_nvram_get_size,
-	.nvram_read		= beat_nvram_read,
-	.nvram_write		= beat_nvram_write,
-	.set_dabr		= beat_set_xdabr,
-	.init_IRQ		= beatic_init_IRQ,
-	.get_irq		= beatic_get_irq,
-	.pci_probe_mode 	= celleb_pci_probe_mode,
-	.pci_setup_phb		= celleb_setup_phb,
-#ifdef CONFIG_KEXEC
-	.kexec_cpu_down		= beat_kexec_cpu_down,
-#endif
-};
-
-define_machine(celleb_native) {
-	.name			= "Cell Reference Set (native)",
-	.probe			= celleb_probe_native,
-	.setup_arch		= celleb_setup_arch_native,
-	.show_cpuinfo		= celleb_show_cpuinfo,
-	.restart		= rtas_restart,
-	.halt			= rtas_halt,
-	.get_boot_time		= rtas_get_boot_time,
-	.get_rtc_time		= rtas_get_rtc_time,
-	.set_rtc_time		= rtas_set_rtc_time,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= celleb_progress,
-	.pci_probe_mode 	= celleb_pci_probe_mode,
-	.pci_setup_phb		= celleb_setup_phb,
-	.init_IRQ		= celleb_init_IRQ_native,
-};
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 4c11421..3af8324 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -163,7 +163,7 @@ static unsigned int iic_get_irq(void)
 
 void iic_setup_cpu(void)
 {
-	out_be64(this_cpu_ptr(&cpu_iic.regs->prio), 0xff);
+	out_be64(&this_cpu_ptr(&cpu_iic)->regs->prio, 0xff);
 }
 
 u8 iic_get_target_id(int cpu)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index c7c8720..21b5023 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -39,6 +39,7 @@
 #include <asm/firmware.h>
 #include <asm/cell-regs.h>
 
+#include "cell.h"
 #include "interrupt.h"
 
 /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages
@@ -197,7 +198,7 @@ static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
-	for (i = 0; i < npages; i++, uaddr += tbl->it_page_shift)
+	for (i = 0; i < npages; i++, uaddr += (1 << tbl->it_page_shift))
 		io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask);
 
 	mb();
@@ -857,7 +858,7 @@ static int __init cell_iommu_init_disabled(void)
 	cell_dma_direct_offset += base;
 
 	if (cell_dma_direct_offset != 0)
-		ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
+		cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
 
 	printk("iommu: disabled, direct DMA offset is 0x%lx\n",
 	       cell_dma_direct_offset);
@@ -1197,8 +1198,8 @@ static int __init cell_iommu_init(void)
 		if (cell_iommu_init_disabled() == 0)
 			goto bail;
 
-	/* Setup various ppc_md. callbacks */
-	ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
+	/* Setup various callbacks */
+	cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
 	ppc_md.dma_get_required_mask = cell_dma_get_required_mask;
 	ppc_md.tce_build = tce_build_cell;
 	ppc_md.tce_free = tce_free_cell;
@@ -1234,5 +1235,3 @@ static int __init cell_iommu_init(void)
 	return 0;
 }
 machine_arch_initcall(cell, cell_iommu_init);
-machine_arch_initcall(celleb_native, cell_iommu_init);
-
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index d62aa98..36cff28 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -54,6 +54,7 @@
 #include <asm/cell-regs.h>
 #include <asm/io-workarounds.h>
 
+#include "cell.h"
 #include "interrupt.h"
 #include "pervasive.h"
 #include "ras.h"
@@ -126,6 +127,8 @@ static int cell_setup_phb(struct pci_controller *phb)
 	if (rc)
 		return rc;
 
+	phb->controller_ops = cell_pci_controller_ops;
+
 	np = phb->dn;
 	model = of_get_property(np, "model", NULL);
 	if (model == NULL || strcmp(np->name, "pci"))
@@ -279,3 +282,5 @@ define_machine(cell) {
 	.init_IRQ       	= cell_init_irq,
 	.pci_setup_phb		= cell_setup_phb,
 };
+
+struct pci_controller_ops cell_pci_controller_ops;
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index b64e7ea..895560f 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -102,13 +102,6 @@ static inline int smp_startup_cpu(unsigned int lcpu)
 	return 1;
 }
 
-static int __init smp_iic_probe(void)
-{
-	iic_request_IPIs();
-
-	return num_possible_cpus();
-}
-
 static void smp_cell_setup_cpu(int cpu)
 {
 	if (cpu != boot_cpuid)
@@ -139,7 +132,7 @@ static int smp_cell_kick_cpu(int nr)
 
 static struct smp_ops_t bpa_iic_smp_ops = {
 	.message_pass	= iic_message_pass,
-	.probe		= smp_iic_probe,
+	.probe		= iic_request_IPIs,
 	.kick_cpu	= smp_cell_kick_cpu,
 	.setup_cpu	= smp_cell_setup_cpu,
 	.cpu_bootable	= smp_generic_cpu_bootable,
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index b0ec78e..a494028 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -39,6 +39,7 @@ static void *spu_syscall_table[] = {
 #define PPC_SYS(func)		sys_ni_syscall,
 #define OLDSYS(func)		sys_ni_syscall,
 #define SYS32ONLY(func)		sys_ni_syscall,
+#define PPC64ONLY(func)		sys_ni_syscall,
 #define SYSX(f, f3264, f32)	sys_ni_syscall,
 
 #define SYSCALL_SPU(func)	sys_##func,
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 860a59e..15ebc4e 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -253,7 +253,7 @@ static void briq_restart(char *cmd)
  * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
  * the the built-in serial node. Instead, a /failsafe node is created.
  */
-static void chrp_init_early(void)
+static __init void chrp_init_early(void)
 {
 	struct device_node *node;
 	const char *property;
diff --git a/arch/powerpc/platforms/maple/maple.h b/arch/powerpc/platforms/maple/maple.h
index c6911dd..eecfa18 100644
--- a/arch/powerpc/platforms/maple/maple.h
+++ b/arch/powerpc/platforms/maple/maple.h
@@ -10,3 +10,5 @@ extern void maple_calibrate_decr(void);
 extern void maple_pci_init(void);
 extern void maple_pci_irq_fixup(struct pci_dev *dev);
 extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
+
+extern struct pci_controller_ops maple_pci_controller_ops;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index d3a1306..a923230 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -510,6 +510,7 @@ static int __init maple_add_bridge(struct device_node *dev)
 		return -ENOMEM;
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+	hose->controller_ops = maple_pci_controller_ops;
 
 	disp_name = NULL;
 	if (of_device_is_compatible(dev, "u3-agp")) {
@@ -660,3 +661,6 @@ static void quirk_ipr_msi(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
 			quirk_ipr_msi);
+
+struct pci_controller_ops maple_pci_controller_ops = {
+};
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 56b85cd..a837188 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -203,7 +203,7 @@ static void __init maple_init_early(void)
 {
 	DBG(" -> maple_init_early\n");
 
-	iommu_init_early_dart();
+	iommu_init_early_dart(&maple_pci_controller_ops);
 
 	DBG(" <- maple_init_early\n");
 }
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 2e576f2..b8f567b 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -27,6 +27,8 @@
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 
+#include "pasemi.h"
+
 #define IOBMAP_PAGE_SHIFT	12
 #define IOBMAP_PAGE_SIZE	(1 << IOBMAP_PAGE_SHIFT)
 #define IOBMAP_PAGE_MASK	(IOBMAP_PAGE_SIZE - 1)
@@ -248,8 +250,8 @@ void __init iommu_init_early_pasemi(void)
 
 	iob_init(NULL);
 
-	ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pasemi;
-	ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pasemi;
+	pasemi_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pasemi;
+	pasemi_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pasemi;
 	ppc_md.tce_build = iobmap_build;
 	ppc_md.tce_free  = iobmap_free;
 	set_pci_dma_ops(&dma_iommu_ops);
diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h
index ea65bf0..11f230a 100644
--- a/arch/powerpc/platforms/pasemi/pasemi.h
+++ b/arch/powerpc/platforms/pasemi/pasemi.h
@@ -30,5 +30,6 @@ static inline void restore_astate(int cpu)
 }
 #endif
 
+extern struct pci_controller_ops pasemi_pci_controller_ops;
 
 #endif /* _PASEMI_PASEMI_H */
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index aa86271..f3a68a0 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -31,6 +31,8 @@
 
 #include <asm/ppc-pci.h>
 
+#include "pasemi.h"
+
 #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
 
 static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset)
@@ -199,6 +201,7 @@ static int __init pas_add_bridge(struct device_node *dev)
 
 	hose->first_busno = 0;
 	hose->last_busno = 0xff;
+	hose->controller_ops = pasemi_pci_controller_ops;
 
 	setup_pa_pxp(hose);
 
@@ -239,3 +242,5 @@ void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
 
 	return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset);
 }
+
+struct pci_controller_ops pasemi_pci_controller_ops;
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 3e91ef5..76f5013 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -246,7 +246,7 @@ static void __init bootx_scan_dt_build_strings(unsigned long base,
 		DBG(" detected display ! adding properties names !\n");
 		bootx_dt_add_string("linux,boot-display", mem_end);
 		bootx_dt_add_string("linux,opened", mem_end);
-		strncpy(bootx_disp_path, namep, 255);
+		strlcpy(bootx_disp_path, namep, sizeof(bootx_disp_path));
 	}
 
 	/* get and store all property names */
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index f4071a6..59ab16f 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -27,6 +27,8 @@
 #include <asm/grackle.h>
 #include <asm/ppc-pci.h>
 
+#include "pmac.h"
+
 #undef DEBUG
 
 #ifdef DEBUG
@@ -798,6 +800,7 @@ static int __init pmac_add_bridge(struct device_node *dev)
 		return -ENOMEM;
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+	hose->controller_ops = pmac_pci_controller_ops;
 
 	disp_name = NULL;
 
@@ -942,7 +945,7 @@ void __init pmac_pci_init(void)
 }
 
 #ifdef CONFIG_PPC32
-int pmac_pci_enable_device_hook(struct pci_dev *dev)
+static bool pmac_pci_enable_device_hook(struct pci_dev *dev)
 {
 	struct device_node* node;
 	int updatecfg = 0;
@@ -958,11 +961,11 @@ int pmac_pci_enable_device_hook(struct pci_dev *dev)
 	    && !node) {
 		printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
 		       pci_name(dev));
-		return -EINVAL;
+		return false;
 	}
 
 	if (!node)
-		return 0;
+		return true;
 
 	uninorth_child = node->parent &&
 		of_device_is_compatible(node->parent, "uni-north");
@@ -1003,7 +1006,7 @@ int pmac_pci_enable_device_hook(struct pci_dev *dev)
 				      L1_CACHE_BYTES >> 2);
 	}
 
-	return 0;
+	return true;
 }
 
 void pmac_pci_fixup_ohci(struct pci_dev *dev)
@@ -1223,3 +1226,30 @@ static void fixup_u4_pcie(struct pci_dev* dev)
 	pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie);
+
+#ifdef CONFIG_PPC64
+static int pmac_pci_probe_mode(struct pci_bus *bus)
+{
+	struct device_node *node = pci_bus_to_OF_node(bus);
+
+	/* We need to use normal PCI probing for the AGP bus,
+	 * since the device for the AGP bridge isn't in the tree.
+	 * Same for the PCIe host on U4 and the HT host bridge.
+	 */
+	if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
+				  of_device_is_compatible(node, "u4-pcie") ||
+				  of_device_is_compatible(node, "u3-ht")))
+		return PCI_PROBE_NORMAL;
+	return PCI_PROBE_DEVTREE;
+}
+#endif /* CONFIG_PPC64 */
+
+struct pci_controller_ops pmac_pci_controller_ops = {
+#ifdef CONFIG_PPC64
+	.probe_mode		= pmac_pci_probe_mode,
+#endif
+#ifdef CONFIG_PPC32
+	.enable_device_hook	= pmac_pci_enable_device_hook,
+#endif
+};
+
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 4c24bf6..59cfc9d 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -321,6 +321,9 @@ static void __init pmac_pic_probe_oldstyle(void)
 		max_irqs = max_real_irqs = 64;
 
 		/* We might have a second cascaded heathrow */
+
+		/* Compensate for of_node_put() in of_find_node_by_name() */
+		of_node_get(master);
 		slave = of_find_node_by_name(master, "mac-io");
 
 		/* Check ordering of master & slave */
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 8327cce..e7f8163 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -25,7 +25,6 @@ extern void pmac_pci_init(void);
 extern void pmac_nvram_update(void);
 extern unsigned char pmac_nvram_read_byte(int addr);
 extern void pmac_nvram_write_byte(int addr, unsigned char val);
-extern int pmac_pci_enable_device_hook(struct pci_dev *dev);
 extern void pmac_pcibios_after_init(void);
 extern int of_show_percpuinfo(struct seq_file *m, int i);
 
@@ -39,4 +38,6 @@ extern void low_cpu_die(void) __attribute__((noreturn));
 extern int pmac_nvram_init(void);
 extern void pmac_pic_init(void);
 
+extern struct pci_controller_ops pmac_pci_controller_ops;
+
 #endif /* __PMAC_H__ */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 713d36d..8dd78f4 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -473,7 +473,7 @@ static void __init pmac_init_early(void)
 	udbg_adb_init(!!strstr(boot_command_line, "btextdbg"));
 
 #ifdef CONFIG_PPC64
-	iommu_init_early_dart();
+	iommu_init_early_dart(&pmac_pci_controller_ops);
 #endif
 
 	/* SMP Init has to be done early as we need to patch up
@@ -637,24 +637,6 @@ static int __init pmac_probe(void)
 	return 1;
 }
 
-#ifdef CONFIG_PPC64
-/* Move that to pci.c */
-static int pmac_pci_probe_mode(struct pci_bus *bus)
-{
-	struct device_node *node = pci_bus_to_OF_node(bus);
-
-	/* We need to use normal PCI probing for the AGP bus,
-	 * since the device for the AGP bridge isn't in the tree.
-	 * Same for the PCIe host on U4 and the HT host bridge.
-	 */
-	if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
-				  of_device_is_compatible(node, "u4-pcie") ||
-				  of_device_is_compatible(node, "u3-ht")))
-		return PCI_PROBE_NORMAL;
-	return PCI_PROBE_DEVTREE;
-}
-#endif /* CONFIG_PPC64 */
-
 define_machine(powermac) {
 	.name			= "PowerMac",
 	.probe			= pmac_probe,
@@ -674,12 +656,10 @@ define_machine(powermac) {
 	.feature_call		= pmac_do_feature_call,
 	.progress		= udbg_progress,
 #ifdef CONFIG_PPC64
-	.pci_probe_mode		= pmac_pci_probe_mode,
 	.power_save		= power4_idle,
 	.enable_pmcs		= power4_enable_pmcs,
 #endif /* CONFIG_PPC64 */
 #ifdef CONFIG_PPC32
-	.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
 	.pcibios_after_init	= pmac_pcibios_after_init,
 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
 #endif
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index af094ae..28a147c 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -268,14 +268,14 @@ static void __init psurge_quad_init(void)
 	mdelay(33);
 }
 
-static int __init smp_psurge_probe(void)
+static void __init smp_psurge_probe(void)
 {
 	int i, ncpus;
 	struct device_node *dn;
 
 	/* We don't do SMP on the PPC601 -- paulus */
 	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
-		return 1;
+		return;
 
 	/*
 	 * The powersurge cpu board can be used in the generation
@@ -289,7 +289,7 @@ static int __init smp_psurge_probe(void)
 	 */
 	dn = of_find_node_by_name(NULL, "hammerhead");
 	if (dn == NULL)
-		return 1;
+		return;
 	of_node_put(dn);
 
 	hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
@@ -310,13 +310,13 @@ static int __init smp_psurge_probe(void)
 			/* not a dual-cpu card */
 			iounmap(hhead_base);
 			psurge_type = PSURGE_NONE;
-			return 1;
+			return;
 		}
 		ncpus = 2;
 	}
 
 	if (psurge_secondary_ipi_init())
-		return 1;
+		return;
 
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
@@ -332,8 +332,6 @@ static int __init smp_psurge_probe(void)
 		set_cpu_present(i, true);
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
-
-	return ncpus;
 }
 
 static int __init smp_psurge_kick_cpu(int nr)
@@ -766,7 +764,7 @@ static void __init smp_core99_setup(int ncpus)
 		powersave_nap = 0;
 }
 
-static int __init smp_core99_probe(void)
+static void __init smp_core99_probe(void)
 {
 	struct device_node *cpus;
 	int ncpus = 0;
@@ -781,7 +779,7 @@ static int __init smp_core99_probe(void)
 
 	/* Nothing more to do if less than 2 of them */
 	if (ncpus <= 1)
-		return 1;
+		return;
 
 	/* We need to perform some early initialisations before we can start
 	 * setting up SMP as we are running before initcalls
@@ -797,8 +795,6 @@ static int __init smp_core99_probe(void)
 
 	/* Collect l2cr and l3cr values from CPU 0 */
 	core99_init_caches(0);
-
-	return ncpus;
 }
 
 static int smp_core99_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 45a8ed0..4b044d8 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -19,10 +19,3 @@ config PPC_POWERNV
 	select CPU_FREQ_GOV_CONSERVATIVE
 	select PPC_DOORBELL
 	default y
-
-config PPC_POWERNV_RTAS
-	depends on PPC_POWERNV
-	bool "Support for RTAS based PowerNV platforms such as BML"
-	default y
-	select PPC_ICS_RTAS
-	select PPC_RTAS
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 6f3c5d3..33e44f3 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -5,7 +5,7 @@ obj-y			+= opal-msglog.o opal-hmi.o opal-power.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
-obj-$(CONFIG_EEH)	+= eeh-ioda.o eeh-powernv.o
+obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
 obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
 obj-$(CONFIG_TRACEPOINTS)	+= opal-tracepoints.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
deleted file mode 100644
index 2809c98..0000000
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ /dev/null
@@ -1,1149 +0,0 @@
-/*
- * The file intends to implement the functions needed by EEH, which is
- * built on IODA compliant chip. Actually, lots of functions related
- * to EEH would be built based on the OPAL APIs.
- *
- * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/msi.h>
-#include <linux/notifier.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-
-#include <asm/eeh.h>
-#include <asm/eeh_event.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/msi_bitmap.h>
-#include <asm/opal.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-#include <asm/tce.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-static int ioda_eeh_nb_init = 0;
-
-static int ioda_eeh_event(struct notifier_block *nb,
-			  unsigned long events, void *change)
-{
-	uint64_t changed_evts = (uint64_t)change;
-
-	/*
-	 * We simply send special EEH event if EEH has
-	 * been enabled, or clear pending events in
-	 * case that we enable EEH soon
-	 */
-	if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
-	    !(events & OPAL_EVENT_PCI_ERROR))
-		return 0;
-
-	if (eeh_enabled())
-		eeh_send_failure_event(NULL);
-	else
-		opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
-
-	return 0;
-}
-
-static struct notifier_block ioda_eeh_nb = {
-	.notifier_call	= ioda_eeh_event,
-	.next		= NULL,
-	.priority	= 0
-};
-
-#ifdef CONFIG_DEBUG_FS
-static ssize_t ioda_eeh_ei_write(struct file *filp,
-				 const char __user *user_buf,
-				 size_t count, loff_t *ppos)
-{
-	struct pci_controller *hose = filp->private_data;
-	struct pnv_phb *phb = hose->private_data;
-	struct eeh_dev *edev;
-	struct eeh_pe *pe;
-	int pe_no, type, func;
-	unsigned long addr, mask;
-	char buf[50];
-	int ret;
-
-	if (!phb->eeh_ops || !phb->eeh_ops->err_inject)
-		return -ENXIO;
-
-	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
-	if (!ret)
-		return -EFAULT;
-
-	/* Retrieve parameters */
-	ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
-		     &pe_no, &type, &func, &addr, &mask);
-	if (ret != 5)
-		return -EINVAL;
-
-	/* Retrieve PE */
-	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
-	if (!edev)
-		return -ENOMEM;
-	edev->phb = hose;
-	edev->pe_config_addr = pe_no;
-	pe = eeh_pe_get(edev);
-	kfree(edev);
-	if (!pe)
-		return -ENODEV;
-
-	/* Do error injection */
-	ret = phb->eeh_ops->err_inject(pe, type, func, addr, mask);
-	return ret < 0 ? ret : count;
-}
-
-static const struct file_operations ioda_eeh_ei_fops = {
-	.open   = simple_open,
-	.llseek = no_llseek,
-	.write  = ioda_eeh_ei_write,
-};
-
-static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val)
-{
-	struct pci_controller *hose = data;
-	struct pnv_phb *phb = hose->private_data;
-
-	out_be64(phb->regs + offset, val);
-	return 0;
-}
-
-static int ioda_eeh_dbgfs_get(void *data, int offset, u64 *val)
-{
-	struct pci_controller *hose = data;
-	struct pnv_phb *phb = hose->private_data;
-
-	*val = in_be64(phb->regs + offset);
-	return 0;
-}
-
-static int ioda_eeh_outb_dbgfs_set(void *data, u64 val)
-{
-	return ioda_eeh_dbgfs_set(data, 0xD10, val);
-}
-
-static int ioda_eeh_outb_dbgfs_get(void *data, u64 *val)
-{
-	return ioda_eeh_dbgfs_get(data, 0xD10, val);
-}
-
-static int ioda_eeh_inbA_dbgfs_set(void *data, u64 val)
-{
-	return ioda_eeh_dbgfs_set(data, 0xD90, val);
-}
-
-static int ioda_eeh_inbA_dbgfs_get(void *data, u64 *val)
-{
-	return ioda_eeh_dbgfs_get(data, 0xD90, val);
-}
-
-static int ioda_eeh_inbB_dbgfs_set(void *data, u64 val)
-{
-	return ioda_eeh_dbgfs_set(data, 0xE10, val);
-}
-
-static int ioda_eeh_inbB_dbgfs_get(void *data, u64 *val)
-{
-	return ioda_eeh_dbgfs_get(data, 0xE10, val);
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_outb_dbgfs_ops, ioda_eeh_outb_dbgfs_get,
-			ioda_eeh_outb_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbA_dbgfs_ops, ioda_eeh_inbA_dbgfs_get,
-			ioda_eeh_inbA_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
-			ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
-#endif /* CONFIG_DEBUG_FS */
-
-
-/**
- * ioda_eeh_post_init - Chip dependent post initialization
- * @hose: PCI controller
- *
- * The function will be called after eeh PEs and devices
- * have been built. That means the EEH is ready to supply
- * service with I/O cache.
- */
-static int ioda_eeh_post_init(struct pci_controller *hose)
-{
-	struct pnv_phb *phb = hose->private_data;
-	int ret;
-
-	/* Register OPAL event notifier */
-	if (!ioda_eeh_nb_init) {
-		ret = opal_notifier_register(&ioda_eeh_nb);
-		if (ret) {
-			pr_err("%s: Can't register OPAL event notifier (%d)\n",
-			       __func__, ret);
-			return ret;
-		}
-
-		ioda_eeh_nb_init = 1;
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	if (!phb->has_dbgfs && phb->dbgfs) {
-		phb->has_dbgfs = 1;
-
-		debugfs_create_file("err_injct", 0200,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_ei_fops);
-
-		debugfs_create_file("err_injct_outbound", 0600,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_outb_dbgfs_ops);
-		debugfs_create_file("err_injct_inboundA", 0600,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_inbA_dbgfs_ops);
-		debugfs_create_file("err_injct_inboundB", 0600,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_inbB_dbgfs_ops);
-	}
-#endif
-
-	/* If EEH is enabled, we're going to rely on that.
-	 * Otherwise, we restore to conventional mechanism
-	 * to clear frozen PE during PCI config access.
-	 */
-	if (eeh_enabled())
-		phb->flags |= PNV_PHB_FLAG_EEH;
-	else
-		phb->flags &= ~PNV_PHB_FLAG_EEH;
-
-	return 0;
-}
-
-/**
- * ioda_eeh_set_option - Set EEH operation or I/O setting
- * @pe: EEH PE
- * @option: options
- *
- * Enable or disable EEH option for the indicated PE. The
- * function also can be used to enable I/O or DMA for the
- * PE.
- */
-static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
-{
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	bool freeze_pe = false;
-	int enable, ret = 0;
-	s64 rc;
-
-	/* Check on PE number */
-	if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
-		pr_err("%s: PE address %x out of range [0, %x] "
-		       "on PHB#%x\n",
-			__func__, pe->addr, phb->ioda.total_pe,
-			hose->global_number);
-		return -EINVAL;
-	}
-
-	switch (option) {
-	case EEH_OPT_DISABLE:
-		return -EPERM;
-	case EEH_OPT_ENABLE:
-		return 0;
-	case EEH_OPT_THAW_MMIO:
-		enable = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
-		break;
-	case EEH_OPT_THAW_DMA:
-		enable = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
-		break;
-	case EEH_OPT_FREEZE_PE:
-		freeze_pe = true;
-		enable = OPAL_EEH_ACTION_SET_FREEZE_ALL;
-		break;
-	default:
-		pr_warn("%s: Invalid option %d\n",
-			__func__, option);
-		return -EINVAL;
-	}
-
-	/* If PHB supports compound PE, to handle it */
-	if (freeze_pe) {
-		if (phb->freeze_pe) {
-			phb->freeze_pe(phb, pe->addr);
-		} else {
-			rc = opal_pci_eeh_freeze_set(phb->opal_id,
-						     pe->addr,
-						     enable);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld freezing "
-					"PHB#%x-PE#%x\n",
-					__func__, rc,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
-		}
-	} else {
-		if (phb->unfreeze_pe) {
-			ret = phb->unfreeze_pe(phb, pe->addr, enable);
-		} else {
-			rc = opal_pci_eeh_freeze_clear(phb->opal_id,
-						       pe->addr,
-						       enable);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld enable %d "
-					"for PHB#%x-PE#%x\n",
-					__func__, rc, option,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
-		}
-	}
-
-	return ret;
-}
-
-static void ioda_eeh_phb_diag(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-	long rc;
-
-	rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
-					 PNV_PCI_DIAG_BUF_SIZE);
-	if (rc != OPAL_SUCCESS)
-		pr_warn("%s: Failed to get diag-data for PHB#%x (%ld)\n",
-			__func__, pe->phb->global_number, rc);
-}
-
-static int ioda_eeh_get_phb_state(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
-	s64 rc;
-	int result = 0;
-
-	rc = opal_pci_eeh_freeze_status(phb->opal_id,
-					pe->addr,
-					&fstate,
-					&pcierr,
-					NULL);
-	if (rc != OPAL_SUCCESS) {
-		pr_warn("%s: Failure %lld getting PHB#%x state\n",
-			__func__, rc, phb->hose->global_number);
-		return EEH_STATE_NOT_SUPPORT;
-	}
-
-	/*
-	 * Check PHB state. If the PHB is frozen for the
-	 * first time, to dump the PHB diag-data.
-	 */
-	if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
-		result = (EEH_STATE_MMIO_ACTIVE  |
-			  EEH_STATE_DMA_ACTIVE   |
-			  EEH_STATE_MMIO_ENABLED |
-			  EEH_STATE_DMA_ENABLED);
-	} else if (!(pe->state & EEH_PE_ISOLATED)) {
-		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
-		ioda_eeh_phb_diag(pe);
-
-		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
-			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
-	}
-
-	return result;
-}
-
-static int ioda_eeh_get_pe_state(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
-	s64 rc;
-	int result;
-
-	/*
-	 * We don't clobber hardware frozen state until PE
-	 * reset is completed. In order to keep EEH core
-	 * moving forward, we have to return operational
-	 * state during PE reset.
-	 */
-	if (pe->state & EEH_PE_RESET) {
-		result = (EEH_STATE_MMIO_ACTIVE  |
-			  EEH_STATE_DMA_ACTIVE   |
-			  EEH_STATE_MMIO_ENABLED |
-			  EEH_STATE_DMA_ENABLED);
-		return result;
-	}
-
-	/*
-	 * Fetch PE state from hardware. If the PHB
-	 * supports compound PE, let it handle that.
-	 */
-	if (phb->get_pe_state) {
-		fstate = phb->get_pe_state(phb, pe->addr);
-	} else {
-		rc = opal_pci_eeh_freeze_status(phb->opal_id,
-						pe->addr,
-						&fstate,
-						&pcierr,
-						NULL);
-		if (rc != OPAL_SUCCESS) {
-			pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
-				__func__, rc, phb->hose->global_number, pe->addr);
-			return EEH_STATE_NOT_SUPPORT;
-		}
-	}
-
-	/* Figure out state */
-	switch (fstate) {
-	case OPAL_EEH_STOPPED_NOT_FROZEN:
-		result = (EEH_STATE_MMIO_ACTIVE  |
-			  EEH_STATE_DMA_ACTIVE   |
-			  EEH_STATE_MMIO_ENABLED |
-			  EEH_STATE_DMA_ENABLED);
-		break;
-	case OPAL_EEH_STOPPED_MMIO_FREEZE:
-		result = (EEH_STATE_DMA_ACTIVE |
-			  EEH_STATE_DMA_ENABLED);
-		break;
-	case OPAL_EEH_STOPPED_DMA_FREEZE:
-		result = (EEH_STATE_MMIO_ACTIVE |
-			  EEH_STATE_MMIO_ENABLED);
-		break;
-	case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
-		result = 0;
-		break;
-	case OPAL_EEH_STOPPED_RESET:
-		result = EEH_STATE_RESET_ACTIVE;
-		break;
-	case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
-		result = EEH_STATE_UNAVAILABLE;
-		break;
-	case OPAL_EEH_STOPPED_PERM_UNAVAIL:
-		result = EEH_STATE_NOT_SUPPORT;
-		break;
-	default:
-		result = EEH_STATE_NOT_SUPPORT;
-		pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
-			__func__, phb->hose->global_number,
-			pe->addr, fstate);
-	}
-
-	/*
-	 * If PHB supports compound PE, to freeze all
-	 * slave PEs for consistency.
-	 *
-	 * If the PE is switching to frozen state for the
-	 * first time, to dump the PHB diag-data.
-	 */
-	if (!(result & EEH_STATE_NOT_SUPPORT) &&
-	    !(result & EEH_STATE_UNAVAILABLE) &&
-	    !(result & EEH_STATE_MMIO_ACTIVE) &&
-	    !(result & EEH_STATE_DMA_ACTIVE)  &&
-	    !(pe->state & EEH_PE_ISOLATED)) {
-		if (phb->freeze_pe)
-			phb->freeze_pe(phb, pe->addr);
-
-		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
-		ioda_eeh_phb_diag(pe);
-
-		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
-			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
-	}
-
-	return result;
-}
-
-/**
- * ioda_eeh_get_state - Retrieve the state of PE
- * @pe: EEH PE
- *
- * The PE's state should be retrieved from the PEEV, PEST
- * IODA tables. Since the OPAL has exported the function
- * to do it, it'd better to use that.
- */
-static int ioda_eeh_get_state(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-
-	/* Sanity check on PE number. PHB PE should have 0 */
-	if (pe->addr < 0 ||
-	    pe->addr >= phb->ioda.total_pe) {
-		pr_warn("%s: PHB#%x-PE#%x out of range [0, %x]\n",
-			__func__, phb->hose->global_number,
-			pe->addr, phb->ioda.total_pe);
-		return EEH_STATE_NOT_SUPPORT;
-	}
-
-	if (pe->type & EEH_PE_PHB)
-		return ioda_eeh_get_phb_state(pe);
-
-	return ioda_eeh_get_pe_state(pe);
-}
-
-static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
-{
-	s64 rc = OPAL_HARDWARE;
-
-	while (1) {
-		rc = opal_pci_poll(phb->opal_id);
-		if (rc <= 0)
-			break;
-
-		if (system_state < SYSTEM_RUNNING)
-			udelay(1000 * rc);
-		else
-			msleep(rc);
-	}
-
-	return rc;
-}
-
-int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
-{
-	struct pnv_phb *phb = hose->private_data;
-	s64 rc = OPAL_HARDWARE;
-
-	pr_debug("%s: Reset PHB#%x, option=%d\n",
-		 __func__, hose->global_number, option);
-
-	/* Issue PHB complete reset request */
-	if (option == EEH_RESET_FUNDAMENTAL ||
-	    option == EEH_RESET_HOT)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PHB_COMPLETE,
-				OPAL_ASSERT_RESET);
-	else if (option == EEH_RESET_DEACTIVATE)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PHB_COMPLETE,
-				OPAL_DEASSERT_RESET);
-	if (rc < 0)
-		goto out;
-
-	/*
-	 * Poll state of the PHB until the request is done
-	 * successfully. The PHB reset is usually PHB complete
-	 * reset followed by hot reset on root bus. So we also
-	 * need the PCI bus settlement delay.
-	 */
-	rc = ioda_eeh_phb_poll(phb);
-	if (option == EEH_RESET_DEACTIVATE) {
-		if (system_state < SYSTEM_RUNNING)
-			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
-		else
-			msleep(EEH_PE_RST_SETTLE_TIME);
-	}
-out:
-	if (rc != OPAL_SUCCESS)
-		return -EIO;
-
-	return 0;
-}
-
-static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
-{
-	struct pnv_phb *phb = hose->private_data;
-	s64 rc = OPAL_SUCCESS;
-
-	pr_debug("%s: Reset PHB#%x, option=%d\n",
-		 __func__, hose->global_number, option);
-
-	/*
-	 * During the reset deassert time, we needn't care
-	 * the reset scope because the firmware does nothing
-	 * for fundamental or hot reset during deassert phase.
-	 */
-	if (option == EEH_RESET_FUNDAMENTAL)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PCI_FUNDAMENTAL,
-				OPAL_ASSERT_RESET);
-	else if (option == EEH_RESET_HOT)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PCI_HOT,
-				OPAL_ASSERT_RESET);
-	else if (option == EEH_RESET_DEACTIVATE)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PCI_HOT,
-				OPAL_DEASSERT_RESET);
-	if (rc < 0)
-		goto out;
-
-	/* Poll state of the PHB until the request is done */
-	rc = ioda_eeh_phb_poll(phb);
-	if (option == EEH_RESET_DEACTIVATE)
-		msleep(EEH_PE_RST_SETTLE_TIME);
-out:
-	if (rc != OPAL_SUCCESS)
-		return -EIO;
-
-	return 0;
-}
-
-static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option)
-
-{
-	struct device_node *dn = pci_device_to_OF_node(dev);
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
-	int aer = edev ? edev->aer_cap : 0;
-	u32 ctrl;
-
-	pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
-		 __func__, pci_domain_nr(dev->bus),
-		 dev->bus->number, option);
-
-	switch (option) {
-	case EEH_RESET_FUNDAMENTAL:
-	case EEH_RESET_HOT:
-		/* Don't report linkDown event */
-		if (aer) {
-			eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					     4, &ctrl);
-			ctrl |= PCI_ERR_UNC_SURPDN;
-                        eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					      4, ctrl);
-                }
-
-		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
-		ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
-		eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
-		msleep(EEH_PE_RST_HOLD_TIME);
-
-		break;
-	case EEH_RESET_DEACTIVATE:
-		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
-		ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-		eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
-		msleep(EEH_PE_RST_SETTLE_TIME);
-
-		/* Continue reporting linkDown event */
-		if (aer) {
-			eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					     4, &ctrl);
-			ctrl &= ~PCI_ERR_UNC_SURPDN;
-			eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					      4, ctrl);
-		}
-
-		break;
-	}
-
-	return 0;
-}
-
-void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
-{
-	struct pci_controller *hose;
-
-	if (pci_is_root_bus(dev->bus)) {
-		hose = pci_bus_to_host(dev->bus);
-		ioda_eeh_root_reset(hose, EEH_RESET_HOT);
-		ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
-	} else {
-		ioda_eeh_bridge_reset(dev, EEH_RESET_HOT);
-		ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
-	}
-}
-
-/**
- * ioda_eeh_reset - Reset the indicated PE
- * @pe: EEH PE
- * @option: reset option
- *
- * Do reset on the indicated PE. For PCI bus sensitive PE,
- * we need to reset the parent p2p bridge. The PHB has to
- * be reinitialized if the p2p bridge is root bridge. For
- * PCI device sensitive PE, we will try to reset the device
- * through FLR. For now, we don't have OPAL APIs to do HARD
- * reset yet, so all reset would be SOFT (HOT) reset.
- */
-static int ioda_eeh_reset(struct eeh_pe *pe, int option)
-{
-	struct pci_controller *hose = pe->phb;
-	struct pci_bus *bus;
-	int ret;
-
-	/*
-	 * For PHB reset, we always have complete reset. For those PEs whose
-	 * primary bus derived from root complex (root bus) or root port
-	 * (usually bus#1), we apply hot or fundamental reset on the root port.
-	 * For other PEs, we always have hot reset on the PE primary bus.
-	 *
-	 * Here, we have different design to pHyp, which always clear the
-	 * frozen state during PE reset. However, the good idea here from
-	 * benh is to keep frozen state before we get PE reset done completely
-	 * (until BAR restore). With the frozen state, HW drops illegal IO
-	 * or MMIO access, which can incur recrusive frozen PE during PE
-	 * reset. The side effect is that EEH core has to clear the frozen
-	 * state explicitly after BAR restore.
-	 */
-	if (pe->type & EEH_PE_PHB) {
-		ret = ioda_eeh_phb_reset(hose, option);
-	} else {
-		struct pnv_phb *phb;
-		s64 rc;
-
-		/*
-		 * The frozen PE might be caused by PAPR error injection
-		 * registers, which are expected to be cleared after hitting
-		 * frozen PE as stated in the hardware spec. Unfortunately,
-		 * that's not true on P7IOC. So we have to clear it manually
-		 * to avoid recursive EEH errors during recovery.
-		 */
-		phb = hose->private_data;
-		if (phb->model == PNV_PHB_MODEL_P7IOC &&
-		    (option == EEH_RESET_HOT ||
-		    option == EEH_RESET_FUNDAMENTAL)) {
-			rc = opal_pci_reset(phb->opal_id,
-					    OPAL_RESET_PHB_ERROR,
-					    OPAL_ASSERT_RESET);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld clearing "
-					"error injection registers\n",
-					__func__, rc);
-				return -EIO;
-			}
-		}
-
-		bus = eeh_pe_bus_get(pe);
-		if (pci_is_root_bus(bus) ||
-		    pci_is_root_bus(bus->parent))
-			ret = ioda_eeh_root_reset(hose, option);
-		else
-			ret = ioda_eeh_bridge_reset(bus->self, option);
-	}
-
-	return ret;
-}
-
-/**
- * ioda_eeh_get_log - Retrieve error log
- * @pe: frozen PE
- * @severity: permanent or temporary error
- * @drv_log: device driver log
- * @len: length of device driver log
- *
- * Retrieve error log, which contains log from device driver
- * and firmware.
- */
-static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
-			    char *drv_log, unsigned long len)
-{
-	if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
-		pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
-
-	return 0;
-}
-
-/**
- * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
- * @pe: EEH PE
- *
- * For particular PE, it might have included PCI bridges. In order
- * to make the PE work properly, those PCI bridges should be configured
- * correctly. However, we need do nothing on P7IOC since the reset
- * function will do everything that should be covered by the function.
- */
-static int ioda_eeh_configure_bridge(struct eeh_pe *pe)
-{
-	return 0;
-}
-
-static int ioda_eeh_err_inject(struct eeh_pe *pe, int type, int func,
-			       unsigned long addr, unsigned long mask)
-{
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	s64 ret;
-
-	/* Sanity check on error type */
-	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
-	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
-		pr_warn("%s: Invalid error type %d\n",
-			__func__, type);
-		return -ERANGE;
-	}
-
-	if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
-	    func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) {
-		pr_warn("%s: Invalid error function %d\n",
-			__func__, func);
-		return -ERANGE;
-	}
-
-	/* Firmware supports error injection ? */
-	if (!opal_check_token(OPAL_PCI_ERR_INJECT)) {
-		pr_warn("%s: Firmware doesn't support error injection\n",
-			__func__);
-		return -ENXIO;
-	}
-
-	/* Do error injection */
-	ret = opal_pci_err_inject(phb->opal_id, pe->addr,
-				  type, func, addr, mask);
-	if (ret != OPAL_SUCCESS) {
-		pr_warn("%s: Failure %lld injecting error "
-			"%d-%d to PHB#%x-PE#%x\n",
-			__func__, ret, type, func,
-			hose->global_number, pe->addr);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data)
-{
-	/* GEM */
-	if (data->gemXfir || data->gemRfir ||
-	    data->gemRirqfir || data->gemMask || data->gemRwof)
-		pr_info("  GEM: %016llx %016llx %016llx %016llx %016llx\n",
-			be64_to_cpu(data->gemXfir),
-			be64_to_cpu(data->gemRfir),
-			be64_to_cpu(data->gemRirqfir),
-			be64_to_cpu(data->gemMask),
-			be64_to_cpu(data->gemRwof));
-
-	/* LEM */
-	if (data->lemFir || data->lemErrMask ||
-	    data->lemAction0 || data->lemAction1 || data->lemWof)
-		pr_info("  LEM: %016llx %016llx %016llx %016llx %016llx\n",
-			be64_to_cpu(data->lemFir),
-			be64_to_cpu(data->lemErrMask),
-			be64_to_cpu(data->lemAction0),
-			be64_to_cpu(data->lemAction1),
-			be64_to_cpu(data->lemWof));
-}
-
-static void ioda_eeh_hub_diag(struct pci_controller *hose)
-{
-	struct pnv_phb *phb = hose->private_data;
-	struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag;
-	long rc;
-
-	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
-	if (rc != OPAL_SUCCESS) {
-		pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
-			__func__, phb->hub_id, rc);
-		return;
-	}
-
-	switch (data->type) {
-	case OPAL_P7IOC_DIAG_TYPE_RGC:
-		pr_info("P7IOC diag-data for RGC\n\n");
-		ioda_eeh_hub_diag_common(data);
-		if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
-			pr_info("  RGC: %016llx %016llx\n",
-				be64_to_cpu(data->rgc.rgcStatus),
-				be64_to_cpu(data->rgc.rgcLdcp));
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_BI:
-		pr_info("P7IOC diag-data for BI %s\n\n",
-			data->bi.biDownbound ? "Downbound" : "Upbound");
-		ioda_eeh_hub_diag_common(data);
-		if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
-		    data->bi.biLdcp2 || data->bi.biFenceStatus)
-			pr_info("  BI:  %016llx %016llx %016llx %016llx\n",
-				be64_to_cpu(data->bi.biLdcp0),
-				be64_to_cpu(data->bi.biLdcp1),
-				be64_to_cpu(data->bi.biLdcp2),
-				be64_to_cpu(data->bi.biFenceStatus));
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_CI:
-		pr_info("P7IOC diag-data for CI Port %d\n\n",
-			data->ci.ciPort);
-		ioda_eeh_hub_diag_common(data);
-		if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
-			pr_info("  CI:  %016llx %016llx\n",
-				be64_to_cpu(data->ci.ciPortStatus),
-				be64_to_cpu(data->ci.ciPortLdcp));
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_MISC:
-		pr_info("P7IOC diag-data for MISC\n\n");
-		ioda_eeh_hub_diag_common(data);
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_I2C:
-		pr_info("P7IOC diag-data for I2C\n\n");
-		ioda_eeh_hub_diag_common(data);
-		break;
-	default:
-		pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
-			__func__, phb->hub_id, data->type);
-	}
-}
-
-static int ioda_eeh_get_pe(struct pci_controller *hose,
-			   u16 pe_no, struct eeh_pe **pe)
-{
-	struct pnv_phb *phb = hose->private_data;
-	struct pnv_ioda_pe *pnv_pe;
-	struct eeh_pe *dev_pe;
-	struct eeh_dev edev;
-
-	/*
-	 * If PHB supports compound PE, to fetch
-	 * the master PE because slave PE is invisible
-	 * to EEH core.
-	 */
-	pnv_pe = &phb->ioda.pe_array[pe_no];
-	if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
-		pnv_pe = pnv_pe->master;
-		WARN_ON(!pnv_pe ||
-			!(pnv_pe->flags & PNV_IODA_PE_MASTER));
-		pe_no = pnv_pe->pe_number;
-	}
-
-	/* Find the PE according to PE# */
-	memset(&edev, 0, sizeof(struct eeh_dev));
-	edev.phb = hose;
-	edev.pe_config_addr = pe_no;
-	dev_pe = eeh_pe_get(&edev);
-	if (!dev_pe)
-		return -EEXIST;
-
-	/* Freeze the (compound) PE */
-	*pe = dev_pe;
-	if (!(dev_pe->state & EEH_PE_ISOLATED))
-		phb->freeze_pe(phb, pe_no);
-
-	/*
-	 * At this point, we're sure the (compound) PE should
-	 * have been frozen. However, we still need poke until
-	 * hitting the frozen PE on top level.
-	 */
-	dev_pe = dev_pe->parent;
-	while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
-		int ret;
-		int active_flags = (EEH_STATE_MMIO_ACTIVE |
-				    EEH_STATE_DMA_ACTIVE);
-
-		ret = eeh_ops->get_state(dev_pe, NULL);
-		if (ret <= 0 || (ret & active_flags) == active_flags) {
-			dev_pe = dev_pe->parent;
-			continue;
-		}
-
-		/* Frozen parent PE */
-		*pe = dev_pe;
-		if (!(dev_pe->state & EEH_PE_ISOLATED))
-			phb->freeze_pe(phb, dev_pe->addr);
-
-		/* Next one */
-		dev_pe = dev_pe->parent;
-	}
-
-	return 0;
-}
-
-/**
- * ioda_eeh_next_error - Retrieve next error for EEH core to handle
- * @pe: The affected PE
- *
- * The function is expected to be called by EEH core while it gets
- * special EEH event (without binding PE). The function calls to
- * OPAL APIs for next error to handle. The informational error is
- * handled internally by platform. However, the dead IOC, dead PHB,
- * fenced PHB and frozen PE should be handled by EEH core eventually.
- */
-static int ioda_eeh_next_error(struct eeh_pe **pe)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	struct eeh_pe *phb_pe, *parent_pe;
-	__be64 frozen_pe_no;
-	__be16 err_type, severity;
-	int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
-	long rc;
-	int state, ret = EEH_NEXT_ERR_NONE;
-
-	/*
-	 * While running here, it's safe to purge the event queue.
-	 * And we should keep the cached OPAL notifier event sychronized
-	 * between the kernel and firmware.
-	 */
-	eeh_remove_event(NULL, false);
-	opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
-
-	list_for_each_entry(hose, &hose_list, list_node) {
-		/*
-		 * If the subordinate PCI buses of the PHB has been
-		 * removed or is exactly under error recovery, we
-		 * needn't take care of it any more.
-		 */
-		phb = hose->private_data;
-		phb_pe = eeh_phb_pe_get(hose);
-		if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
-			continue;
-
-		rc = opal_pci_next_error(phb->opal_id,
-				&frozen_pe_no, &err_type, &severity);
-
-		/* If OPAL API returns error, we needn't proceed */
-		if (rc != OPAL_SUCCESS) {
-			pr_devel("%s: Invalid return value on "
-				 "PHB#%x (0x%lx) from opal_pci_next_error",
-				 __func__, hose->global_number, rc);
-			continue;
-		}
-
-		/* If the PHB doesn't have error, stop processing */
-		if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
-		    be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
-			pr_devel("%s: No error found on PHB#%x\n",
-				 __func__, hose->global_number);
-			continue;
-		}
-
-		/*
-		 * Processing the error. We're expecting the error with
-		 * highest priority reported upon multiple errors on the
-		 * specific PHB.
-		 */
-		pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
-			 __func__, be16_to_cpu(err_type), be16_to_cpu(severity),
-			 be64_to_cpu(frozen_pe_no), hose->global_number);
-		switch (be16_to_cpu(err_type)) {
-		case OPAL_EEH_IOC_ERROR:
-			if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
-				pr_err("EEH: dead IOC detected\n");
-				ret = EEH_NEXT_ERR_DEAD_IOC;
-			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
-				pr_info("EEH: IOC informative error "
-					"detected\n");
-				ioda_eeh_hub_diag(hose);
-				ret = EEH_NEXT_ERR_NONE;
-			}
-
-			break;
-		case OPAL_EEH_PHB_ERROR:
-			if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
-				*pe = phb_pe;
-				pr_err("EEH: dead PHB#%x detected, "
-				       "location: %s\n",
-				       hose->global_number,
-				       eeh_pe_loc_get(phb_pe));
-				ret = EEH_NEXT_ERR_DEAD_PHB;
-			} else if (be16_to_cpu(severity) ==
-						OPAL_EEH_SEV_PHB_FENCED) {
-				*pe = phb_pe;
-				pr_err("EEH: Fenced PHB#%x detected, "
-				       "location: %s\n",
-				       hose->global_number,
-				       eeh_pe_loc_get(phb_pe));
-				ret = EEH_NEXT_ERR_FENCED_PHB;
-			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
-				pr_info("EEH: PHB#%x informative error "
-					"detected, location: %s\n",
-					hose->global_number,
-					eeh_pe_loc_get(phb_pe));
-				ioda_eeh_phb_diag(phb_pe);
-				pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
-				ret = EEH_NEXT_ERR_NONE;
-			}
-
-			break;
-		case OPAL_EEH_PE_ERROR:
-			/*
-			 * If we can't find the corresponding PE, we
-			 * just try to unfreeze.
-			 */
-			if (ioda_eeh_get_pe(hose,
-					    be64_to_cpu(frozen_pe_no), pe)) {
-				/* Try best to clear it */
-				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
-					hose->global_number, frozen_pe_no);
-				pr_info("EEH: PHB location: %s\n",
-					eeh_pe_loc_get(phb_pe));
-				opal_pci_eeh_freeze_clear(phb->opal_id, frozen_pe_no,
-					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-				ret = EEH_NEXT_ERR_NONE;
-			} else if ((*pe)->state & EEH_PE_ISOLATED ||
-				   eeh_pe_passed(*pe)) {
-				ret = EEH_NEXT_ERR_NONE;
-			} else {
-				pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
-					(*pe)->addr, (*pe)->phb->global_number);
-				pr_err("EEH: PE location: %s, PHB location: %s\n",
-					eeh_pe_loc_get(*pe), eeh_pe_loc_get(phb_pe));
-				ret = EEH_NEXT_ERR_FROZEN_PE;
-			}
-
-			break;
-		default:
-			pr_warn("%s: Unexpected error type %d\n",
-				__func__, be16_to_cpu(err_type));
-		}
-
-		/*
-		 * EEH core will try recover from fenced PHB or
-		 * frozen PE. In the time for frozen PE, EEH core
-		 * enable IO path for that before collecting logs,
-		 * but it ruins the site. So we have to dump the
-		 * log in advance here.
-		 */
-		if ((ret == EEH_NEXT_ERR_FROZEN_PE  ||
-		    ret == EEH_NEXT_ERR_FENCED_PHB) &&
-		    !((*pe)->state & EEH_PE_ISOLATED)) {
-			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
-			ioda_eeh_phb_diag(*pe);
-
-			if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
-				pnv_pci_dump_phb_diag_data((*pe)->phb,
-							   (*pe)->data);
-		}
-
-		/*
-		 * We probably have the frozen parent PE out there and
-		 * we need have to handle frozen parent PE firstly.
-		 */
-		if (ret == EEH_NEXT_ERR_FROZEN_PE) {
-			parent_pe = (*pe)->parent;
-			while (parent_pe) {
-				/* Hit the ceiling ? */
-				if (parent_pe->type & EEH_PE_PHB)
-					break;
-
-				/* Frozen parent PE ? */
-				state = ioda_eeh_get_state(parent_pe);
-				if (state > 0 &&
-				    (state & active_flags) != active_flags)
-					*pe = parent_pe;
-
-				/* Next parent level */
-				parent_pe = parent_pe->parent;
-			}
-
-			/* We possibly migrate to another PE */
-			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
-		}
-
-		/*
-		 * If we have no errors on the specific PHB or only
-		 * informative error there, we continue poking it.
-		 * Otherwise, we need actions to be taken by upper
-		 * layer.
-		 */
-		if (ret > EEH_NEXT_ERR_INF)
-			break;
-	}
-
-	return ret;
-}
-
-struct pnv_eeh_ops ioda_eeh_ops = {
-	.post_init		= ioda_eeh_post_init,
-	.set_option		= ioda_eeh_set_option,
-	.get_state		= ioda_eeh_get_state,
-	.reset			= ioda_eeh_reset,
-	.get_log		= ioda_eeh_get_log,
-	.configure_bridge	= ioda_eeh_configure_bridge,
-	.err_inject		= ioda_eeh_err_inject,
-	.next_error		= ioda_eeh_next_error
-};
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index e261869..ce738ab 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/atomic.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
@@ -38,12 +39,14 @@
 #include "powernv.h"
 #include "pci.h"
 
+static bool pnv_eeh_nb_init = false;
+
 /**
- * powernv_eeh_init - EEH platform dependent initialization
+ * pnv_eeh_init - EEH platform dependent initialization
  *
  * EEH platform dependent initialization on powernv
  */
-static int powernv_eeh_init(void)
+static int pnv_eeh_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
@@ -85,37 +88,280 @@ static int powernv_eeh_init(void)
 	return 0;
 }
 
+static int pnv_eeh_event(struct notifier_block *nb,
+			 unsigned long events, void *change)
+{
+	uint64_t changed_evts = (uint64_t)change;
+
+	/*
+	 * We simply send special EEH event if EEH has
+	 * been enabled, or clear pending events in
+	 * case that we enable EEH soon
+	 */
+	if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
+	    !(events & OPAL_EVENT_PCI_ERROR))
+		return 0;
+
+	if (eeh_enabled())
+		eeh_send_failure_event(NULL);
+	else
+		opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
+
+	return 0;
+}
+
+static struct notifier_block pnv_eeh_nb = {
+	.notifier_call	= pnv_eeh_event,
+	.next		= NULL,
+	.priority	= 0
+};
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t pnv_eeh_ei_write(struct file *filp,
+				const char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct pci_controller *hose = filp->private_data;
+	struct eeh_dev *edev;
+	struct eeh_pe *pe;
+	int pe_no, type, func;
+	unsigned long addr, mask;
+	char buf[50];
+	int ret;
+
+	if (!eeh_ops || !eeh_ops->err_inject)
+		return -ENXIO;
+
+	/* Copy over argument buffer */
+	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
+	if (!ret)
+		return -EFAULT;
+
+	/* Retrieve parameters */
+	ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
+		     &pe_no, &type, &func, &addr, &mask);
+	if (ret != 5)
+		return -EINVAL;
+
+	/* Retrieve PE */
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+	edev->phb = hose;
+	edev->pe_config_addr = pe_no;
+	pe = eeh_pe_get(edev);
+	kfree(edev);
+	if (!pe)
+		return -ENODEV;
+
+	/* Do error injection */
+	ret = eeh_ops->err_inject(pe, type, func, addr, mask);
+	return ret < 0 ? ret : count;
+}
+
+static const struct file_operations pnv_eeh_ei_fops = {
+	.open	= simple_open,
+	.llseek	= no_llseek,
+	.write	= pnv_eeh_ei_write,
+};
+
+static int pnv_eeh_dbgfs_set(void *data, int offset, u64 val)
+{
+	struct pci_controller *hose = data;
+	struct pnv_phb *phb = hose->private_data;
+
+	out_be64(phb->regs + offset, val);
+	return 0;
+}
+
+static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val)
+{
+	struct pci_controller *hose = data;
+	struct pnv_phb *phb = hose->private_data;
+
+	*val = in_be64(phb->regs + offset);
+	return 0;
+}
+
+static int pnv_eeh_outb_dbgfs_set(void *data, u64 val)
+{
+	return pnv_eeh_dbgfs_set(data, 0xD10, val);
+}
+
+static int pnv_eeh_outb_dbgfs_get(void *data, u64 *val)
+{
+	return pnv_eeh_dbgfs_get(data, 0xD10, val);
+}
+
+static int pnv_eeh_inbA_dbgfs_set(void *data, u64 val)
+{
+	return pnv_eeh_dbgfs_set(data, 0xD90, val);
+}
+
+static int pnv_eeh_inbA_dbgfs_get(void *data, u64 *val)
+{
+	return pnv_eeh_dbgfs_get(data, 0xD90, val);
+}
+
+static int pnv_eeh_inbB_dbgfs_set(void *data, u64 val)
+{
+	return pnv_eeh_dbgfs_set(data, 0xE10, val);
+}
+
+static int pnv_eeh_inbB_dbgfs_get(void *data, u64 *val)
+{
+	return pnv_eeh_dbgfs_get(data, 0xE10, val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_outb_dbgfs_ops, pnv_eeh_outb_dbgfs_get,
+			pnv_eeh_outb_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbA_dbgfs_ops, pnv_eeh_inbA_dbgfs_get,
+			pnv_eeh_inbA_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbB_dbgfs_ops, pnv_eeh_inbB_dbgfs_get,
+			pnv_eeh_inbB_dbgfs_set, "0x%llx\n");
+#endif /* CONFIG_DEBUG_FS */
+
 /**
- * powernv_eeh_post_init - EEH platform dependent post initialization
+ * pnv_eeh_post_init - EEH platform dependent post initialization
  *
  * EEH platform dependent post initialization on powernv. When
  * the function is called, the EEH PEs and devices should have
  * been built. If the I/O cache staff has been built, EEH is
  * ready to supply service.
  */
-static int powernv_eeh_post_init(void)
+static int pnv_eeh_post_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 	int ret = 0;
 
+	/* Register OPAL event notifier */
+	if (!pnv_eeh_nb_init) {
+		ret = opal_notifier_register(&pnv_eeh_nb);
+		if (ret) {
+			pr_warn("%s: Can't register OPAL event notifier (%d)\n",
+				__func__, ret);
+			return ret;
+		}
+
+		pnv_eeh_nb_init = true;
+	}
+
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
 
-		if (phb->eeh_ops && phb->eeh_ops->post_init) {
-			ret = phb->eeh_ops->post_init(hose);
-			if (ret)
-				break;
-		}
+		/*
+		 * If EEH is enabled, we're going to rely on that.
+		 * Otherwise, we restore to conventional mechanism
+		 * to clear frozen PE during PCI config access.
+		 */
+		if (eeh_enabled())
+			phb->flags |= PNV_PHB_FLAG_EEH;
+		else
+			phb->flags &= ~PNV_PHB_FLAG_EEH;
+
+		/* Create debugfs entries */
+#ifdef CONFIG_DEBUG_FS
+		if (phb->has_dbgfs || !phb->dbgfs)
+			continue;
+
+		phb->has_dbgfs = 1;
+		debugfs_create_file("err_injct", 0200,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_ei_fops);
+
+		debugfs_create_file("err_injct_outbound", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_outb_dbgfs_ops);
+		debugfs_create_file("err_injct_inboundA", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_inbA_dbgfs_ops);
+		debugfs_create_file("err_injct_inboundB", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_inbB_dbgfs_ops);
+#endif /* CONFIG_DEBUG_FS */
 	}
 
+
 	return ret;
 }
 
+static int pnv_eeh_cap_start(struct pci_dn *pdn)
+{
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
+{
+	int pos = pnv_eeh_cap_start(pdn);
+	int cnt = 48;   /* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+	while (cnt--) {
+		pnv_pci_cfg_read(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+
+		pos &= ~3;
+		pnv_pci_cfg_read(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+
+		/* Found */
+		if (id == cap)
+			return pos;
+
+		/* Next one */
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 header;
+	int pos = 256, ttl = (4096 - 256) / 8;
+
+	if (!edev || !edev->pcie_cap)
+		return 0;
+	if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		return 0;
+	else if (!header)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap && pos)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < 256)
+			break;
+
+		if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+			break;
+	}
+
+	return 0;
+}
+
 /**
- * powernv_eeh_dev_probe - Do probe on PCI device
- * @dev: PCI device
- * @flag: unused
+ * pnv_eeh_probe - Do probe on PCI device
+ * @pdn: PCI device node
+ * @data: unused
  *
  * When EEH module is installed during system boot, all PCI devices
  * are checked one by one to see if it supports EEH. The function
@@ -129,12 +375,12 @@ static int powernv_eeh_post_init(void)
  * was possiblly triggered by EEH core, the binding between EEH device
  * and the PCI device isn't built yet.
  */
-static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
+static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 {
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pci_controller *hose = pdn->phb;
 	struct pnv_phb *phb = hose->private_data;
-	struct device_node *dn = pci_device_to_OF_node(dev);
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	uint32_t pcie_flags;
 	int ret;
 
 	/*
@@ -143,40 +389,42 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * the root bridge. So it's not reasonable to continue
 	 * the probing.
 	 */
-	if (!dn || !edev || edev->pe)
-		return 0;
+	if (!edev || edev->pe)
+		return NULL;
 
 	/* Skip for PCI-ISA bridge */
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
-		return 0;
+	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
+		return NULL;
 
 	/* Initialize eeh device */
-	edev->class_code = dev->class;
+	edev->class_code = pdn->class_code;
 	edev->mode	&= 0xFFFFFF00;
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+	edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->aer_cap  = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
-	edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
-	if (pci_is_pcie(dev)) {
-		edev->pcie_cap = pci_pcie_cap(dev);
-
-		if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
-			edev->mode |= EEH_DEV_ROOT_PORT;
-		else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
-			edev->mode |= EEH_DEV_DS_PORT;
-
-		edev->aer_cap = pci_find_ext_capability(dev,
-							PCI_EXT_CAP_ID_ERR);
+		if (edev->pcie_cap) {
+			pnv_pci_cfg_read(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
 	}
 
-	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
-	edev->pe_config_addr	= phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
+	edev->config_addr    = (pdn->busno << 8) | (pdn->devfn);
+	edev->pe_config_addr = phb->ioda.pe_rmap[edev->config_addr];
 
 	/* Create PE */
 	ret = eeh_add_to_parent_pe(edev);
 	if (ret) {
-		pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n",
-			__func__, pci_name(dev), ret);
-		return ret;
+		pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%d)\n",
+			__func__, hose->global_number, pdn->busno,
+			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
+		return NULL;
 	}
 
 	/*
@@ -195,8 +443,10 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * Broadcom Austin 4-ports NICs (14e4:1657)
 	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
 	 */
-	if ((dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x1657) ||
-	    (dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x168e))
+	if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x1657) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168e))
 		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
 
 	/*
@@ -206,7 +456,8 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * to PE reset.
 	 */
 	if (!edev->pe->bus)
-		edev->pe->bus = dev->bus;
+		edev->pe->bus = pci_find_bus(hose->global_number,
+					     pdn->busno);
 
 	/*
 	 * Enable EEH explicitly so that we will do EEH check
@@ -217,11 +468,11 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	/* Save memory bars */
 	eeh_save_bars(edev);
 
-	return 0;
+	return NULL;
 }
 
 /**
- * powernv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
+ * pnv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
  * @pe: EEH PE
  * @option: operation to be issued
  *
@@ -229,36 +480,236 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
  * Currently, following options are support according to PAPR:
  * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
  */
-static int powernv_eeh_set_option(struct eeh_pe *pe, int option)
+static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	bool freeze_pe = false;
+	int opt, ret = 0;
+	s64 rc;
+
+	/* Sanity check on option */
+	switch (option) {
+	case EEH_OPT_DISABLE:
+		return -EPERM;
+	case EEH_OPT_ENABLE:
+		return 0;
+	case EEH_OPT_THAW_MMIO:
+		opt = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
+		break;
+	case EEH_OPT_THAW_DMA:
+		opt = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
+		break;
+	case EEH_OPT_FREEZE_PE:
+		freeze_pe = true;
+		opt = OPAL_EEH_ACTION_SET_FREEZE_ALL;
+		break;
+	default:
+		pr_warn("%s: Invalid option %d\n", __func__, option);
+		return -EINVAL;
+	}
 
-	/*
-	 * What we need do is pass it down for hardware
-	 * implementation to handle it.
-	 */
-	if (phb->eeh_ops && phb->eeh_ops->set_option)
-		ret = phb->eeh_ops->set_option(pe, option);
+	/* If PHB supports compound PE, to handle it */
+	if (freeze_pe) {
+		if (phb->freeze_pe) {
+			phb->freeze_pe(phb, pe->addr);
+		} else {
+			rc = opal_pci_eeh_freeze_set(phb->opal_id,
+						     pe->addr, opt);
+			if (rc != OPAL_SUCCESS) {
+				pr_warn("%s: Failure %lld freezing "
+					"PHB#%x-PE#%x\n",
+					__func__, rc,
+					phb->hose->global_number, pe->addr);
+				ret = -EIO;
+			}
+		}
+	} else {
+		if (phb->unfreeze_pe) {
+			ret = phb->unfreeze_pe(phb, pe->addr, opt);
+		} else {
+			rc = opal_pci_eeh_freeze_clear(phb->opal_id,
+						       pe->addr, opt);
+			if (rc != OPAL_SUCCESS) {
+				pr_warn("%s: Failure %lld enable %d "
+					"for PHB#%x-PE#%x\n",
+					__func__, rc, option,
+					phb->hose->global_number, pe->addr);
+				ret = -EIO;
+			}
+		}
+	}
 
 	return ret;
 }
 
 /**
- * powernv_eeh_get_pe_addr - Retrieve PE address
+ * pnv_eeh_get_pe_addr - Retrieve PE address
  * @pe: EEH PE
  *
  * Retrieve the PE address according to the given tranditional
  * PCI BDF (Bus/Device/Function) address.
  */
-static int powernv_eeh_get_pe_addr(struct eeh_pe *pe)
+static int pnv_eeh_get_pe_addr(struct eeh_pe *pe)
 {
 	return pe->addr;
 }
 
+static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	s64 rc;
+
+	rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
+					 PNV_PCI_DIAG_BUF_SIZE);
+	if (rc != OPAL_SUCCESS)
+		pr_warn("%s: Failure %lld getting PHB#%x diag-data\n",
+			__func__, rc, pe->phb->global_number);
+}
+
+static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	u8 fstate;
+	__be16 pcierr;
+	s64 rc;
+	int result = 0;
+
+	rc = opal_pci_eeh_freeze_status(phb->opal_id,
+					pe->addr,
+					&fstate,
+					&pcierr,
+					NULL);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld getting PHB#%x state\n",
+			__func__, rc, phb->hose->global_number);
+		return EEH_STATE_NOT_SUPPORT;
+	}
+
+	/*
+	 * Check PHB state. If the PHB is frozen for the
+	 * first time, to dump the PHB diag-data.
+	 */
+	if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+	} else if (!(pe->state & EEH_PE_ISOLATED)) {
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		pnv_eeh_get_phb_diag(pe);
+
+		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+	}
+
+	return result;
+}
+
+static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	u8 fstate;
+	__be16 pcierr;
+	s64 rc;
+	int result;
+
+	/*
+	 * We don't clobber hardware frozen state until PE
+	 * reset is completed. In order to keep EEH core
+	 * moving forward, we have to return operational
+	 * state during PE reset.
+	 */
+	if (pe->state & EEH_PE_RESET) {
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		return result;
+	}
+
+	/*
+	 * Fetch PE state from hardware. If the PHB
+	 * supports compound PE, let it handle that.
+	 */
+	if (phb->get_pe_state) {
+		fstate = phb->get_pe_state(phb, pe->addr);
+	} else {
+		rc = opal_pci_eeh_freeze_status(phb->opal_id,
+						pe->addr,
+						&fstate,
+						&pcierr,
+						NULL);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
+				__func__, rc, phb->hose->global_number,
+				pe->addr);
+			return EEH_STATE_NOT_SUPPORT;
+		}
+	}
+
+	/* Figure out state */
+	switch (fstate) {
+	case OPAL_EEH_STOPPED_NOT_FROZEN:
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_MMIO_FREEZE:
+		result = (EEH_STATE_DMA_ACTIVE |
+			  EEH_STATE_DMA_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_DMA_FREEZE:
+		result = (EEH_STATE_MMIO_ACTIVE |
+			  EEH_STATE_MMIO_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
+		result = 0;
+		break;
+	case OPAL_EEH_STOPPED_RESET:
+		result = EEH_STATE_RESET_ACTIVE;
+		break;
+	case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
+		result = EEH_STATE_UNAVAILABLE;
+		break;
+	case OPAL_EEH_STOPPED_PERM_UNAVAIL:
+		result = EEH_STATE_NOT_SUPPORT;
+		break;
+	default:
+		result = EEH_STATE_NOT_SUPPORT;
+		pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
+			__func__, phb->hose->global_number,
+			pe->addr, fstate);
+	}
+
+	/*
+	 * If PHB supports compound PE, to freeze all
+	 * slave PEs for consistency.
+	 *
+	 * If the PE is switching to frozen state for the
+	 * first time, to dump the PHB diag-data.
+	 */
+	if (!(result & EEH_STATE_NOT_SUPPORT) &&
+	    !(result & EEH_STATE_UNAVAILABLE) &&
+	    !(result & EEH_STATE_MMIO_ACTIVE) &&
+	    !(result & EEH_STATE_DMA_ACTIVE)  &&
+	    !(pe->state & EEH_PE_ISOLATED)) {
+		if (phb->freeze_pe)
+			phb->freeze_pe(phb, pe->addr);
+
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		pnv_eeh_get_phb_diag(pe);
+
+		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+	}
+
+	return result;
+}
+
 /**
- * powernv_eeh_get_state - Retrieve PE state
+ * pnv_eeh_get_state - Retrieve PE state
  * @pe: EEH PE
  * @delay: delay while PE state is temporarily unavailable
  *
@@ -267,64 +718,279 @@ static int powernv_eeh_get_pe_addr(struct eeh_pe *pe)
  * we prefer passing down to hardware implementation to handle
  * it.
  */
-static int powernv_eeh_get_state(struct eeh_pe *pe, int *delay)
+static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
+{
+	int ret;
+
+	if (pe->type & EEH_PE_PHB)
+		ret = pnv_eeh_get_phb_state(pe);
+	else
+		ret = pnv_eeh_get_pe_state(pe);
+
+	if (!delay)
+		return ret;
+
+	/*
+	 * If the PE state is temporarily unavailable,
+	 * to inform the EEH core delay for default
+	 * period (1 second)
+	 */
+	*delay = 0;
+	if (ret & EEH_STATE_UNAVAILABLE)
+		*delay = 1000;
+
+	return ret;
+}
+
+static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+{
+	s64 rc = OPAL_HARDWARE;
+
+	while (1) {
+		rc = opal_pci_poll(phb->opal_id);
+		if (rc <= 0)
+			break;
+
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * rc);
+		else
+			msleep(rc);
+	}
+
+	return rc;
+}
+
+int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
 {
-	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
-	int ret = EEH_STATE_NOT_SUPPORT;
+	s64 rc = OPAL_HARDWARE;
+
+	pr_debug("%s: Reset PHB#%x, option=%d\n",
+		 __func__, hose->global_number, option);
+
+	/* Issue PHB complete reset request */
+	if (option == EEH_RESET_FUNDAMENTAL ||
+	    option == EEH_RESET_HOT)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_COMPLETE,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_DEACTIVATE)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_COMPLETE,
+				    OPAL_DEASSERT_RESET);
+	if (rc < 0)
+		goto out;
 
-	if (phb->eeh_ops && phb->eeh_ops->get_state) {
-		ret = phb->eeh_ops->get_state(pe);
+	/*
+	 * Poll state of the PHB until the request is done
+	 * successfully. The PHB reset is usually PHB complete
+	 * reset followed by hot reset on root bus. So we also
+	 * need the PCI bus settlement delay.
+	 */
+	rc = pnv_eeh_phb_poll(phb);
+	if (option == EEH_RESET_DEACTIVATE) {
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+		else
+			msleep(EEH_PE_RST_SETTLE_TIME);
+	}
+out:
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
 
-		/*
-		 * If the PE state is temporarily unavailable,
-		 * to inform the EEH core delay for default
-		 * period (1 second)
-		 */
-		if (delay) {
-			*delay = 0;
-			if (ret & EEH_STATE_UNAVAILABLE)
-				*delay = 1000;
+	return 0;
+}
+
+static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
+{
+	struct pnv_phb *phb = hose->private_data;
+	s64 rc = OPAL_HARDWARE;
+
+	pr_debug("%s: Reset PHB#%x, option=%d\n",
+		 __func__, hose->global_number, option);
+
+	/*
+	 * During the reset deassert time, we needn't care
+	 * the reset scope because the firmware does nothing
+	 * for fundamental or hot reset during deassert phase.
+	 */
+	if (option == EEH_RESET_FUNDAMENTAL)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_FUNDAMENTAL,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_HOT)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_HOT,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_DEACTIVATE)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_HOT,
+				    OPAL_DEASSERT_RESET);
+	if (rc < 0)
+		goto out;
+
+	/* Poll state of the PHB until the request is done */
+	rc = pnv_eeh_phb_poll(phb);
+	if (option == EEH_RESET_DEACTIVATE)
+		msleep(EEH_PE_RST_SETTLE_TIME);
+out:
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	return 0;
+}
+
+static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+{
+	struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	int aer = edev ? edev->aer_cap : 0;
+	u32 ctrl;
+
+	pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
+		 __func__, pci_domain_nr(dev->bus),
+		 dev->bus->number, option);
+
+	switch (option) {
+	case EEH_RESET_FUNDAMENTAL:
+	case EEH_RESET_HOT:
+		/* Don't report linkDown event */
+		if (aer) {
+			eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl |= PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
 		}
+
+		eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+		ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+		eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+		ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+		eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
+		/* Continue reporting linkDown event */
+		if (aer) {
+			eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl &= ~PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
+		}
+
+		break;
 	}
 
-	return ret;
+	return 0;
+}
+
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+
+	if (pci_is_root_bus(dev->bus)) {
+		hose = pci_bus_to_host(dev->bus);
+		pnv_eeh_root_reset(hose, EEH_RESET_HOT);
+		pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+	} else {
+		pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
+		pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+	}
 }
 
 /**
- * powernv_eeh_reset - Reset the specified PE
+ * pnv_eeh_reset - Reset the specified PE
  * @pe: EEH PE
  * @option: reset option
  *
- * Reset the specified PE
+ * Do reset on the indicated PE. For PCI bus sensitive PE,
+ * we need to reset the parent p2p bridge. The PHB has to
+ * be reinitialized if the p2p bridge is root bridge. For
+ * PCI device sensitive PE, we will try to reset the device
+ * through FLR. For now, we don't have OPAL APIs to do HARD
+ * reset yet, so all reset would be SOFT (HOT) reset.
  */
-static int powernv_eeh_reset(struct eeh_pe *pe, int option)
+static int pnv_eeh_reset(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	struct pci_bus *bus;
+	int ret;
+
+	/*
+	 * For PHB reset, we always have complete reset. For those PEs whose
+	 * primary bus derived from root complex (root bus) or root port
+	 * (usually bus#1), we apply hot or fundamental reset on the root port.
+	 * For other PEs, we always have hot reset on the PE primary bus.
+	 *
+	 * Here, we have different design to pHyp, which always clear the
+	 * frozen state during PE reset. However, the good idea here from
+	 * benh is to keep frozen state before we get PE reset done completely
+	 * (until BAR restore). With the frozen state, HW drops illegal IO
+	 * or MMIO access, which can incur recrusive frozen PE during PE
+	 * reset. The side effect is that EEH core has to clear the frozen
+	 * state explicitly after BAR restore.
+	 */
+	if (pe->type & EEH_PE_PHB) {
+		ret = pnv_eeh_phb_reset(hose, option);
+	} else {
+		struct pnv_phb *phb;
+		s64 rc;
 
-	if (phb->eeh_ops && phb->eeh_ops->reset)
-		ret = phb->eeh_ops->reset(pe, option);
+		/*
+		 * The frozen PE might be caused by PAPR error injection
+		 * registers, which are expected to be cleared after hitting
+		 * frozen PE as stated in the hardware spec. Unfortunately,
+		 * that's not true on P7IOC. So we have to clear it manually
+		 * to avoid recursive EEH errors during recovery.
+		 */
+		phb = hose->private_data;
+		if (phb->model == PNV_PHB_MODEL_P7IOC &&
+		    (option == EEH_RESET_HOT ||
+		    option == EEH_RESET_FUNDAMENTAL)) {
+			rc = opal_pci_reset(phb->opal_id,
+					    OPAL_RESET_PHB_ERROR,
+					    OPAL_ASSERT_RESET);
+			if (rc != OPAL_SUCCESS) {
+				pr_warn("%s: Failure %lld clearing "
+					"error injection registers\n",
+					__func__, rc);
+				return -EIO;
+			}
+		}
+
+		bus = eeh_pe_bus_get(pe);
+		if (pci_is_root_bus(bus) ||
+			pci_is_root_bus(bus->parent))
+			ret = pnv_eeh_root_reset(hose, option);
+		else
+			ret = pnv_eeh_bridge_reset(bus->self, option);
+	}
 
 	return ret;
 }
 
 /**
- * powernv_eeh_wait_state - Wait for PE state
+ * pnv_eeh_wait_state - Wait for PE state
  * @pe: EEH PE
  * @max_wait: maximal period in microsecond
  *
  * Wait for the state of associated PE. It might take some time
  * to retrieve the PE's state.
  */
-static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
+static int pnv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 {
 	int ret;
 	int mwait;
 
 	while (1) {
-		ret = powernv_eeh_get_state(pe, &mwait);
+		ret = pnv_eeh_get_state(pe, &mwait);
 
 		/*
 		 * If the PE's state is temporarily unavailable,
@@ -348,7 +1014,7 @@ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 }
 
 /**
- * powernv_eeh_get_log - Retrieve error log
+ * pnv_eeh_get_log - Retrieve error log
  * @pe: EEH PE
  * @severity: temporary or permanent error log
  * @drv_log: driver log to be combined with retrieved error log
@@ -356,41 +1022,30 @@ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
  *
  * Retrieve the temporary or permanent error from the PE.
  */
-static int powernv_eeh_get_log(struct eeh_pe *pe, int severity,
-			       char *drv_log, unsigned long len)
+static int pnv_eeh_get_log(struct eeh_pe *pe, int severity,
+			   char *drv_log, unsigned long len)
 {
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
+		pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
 
-	if (phb->eeh_ops && phb->eeh_ops->get_log)
-		ret = phb->eeh_ops->get_log(pe, severity, drv_log, len);
-
-	return ret;
+	return 0;
 }
 
 /**
- * powernv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
+ * pnv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
  * @pe: EEH PE
  *
  * The function will be called to reconfigure the bridges included
  * in the specified PE so that the mulfunctional PE would be recovered
  * again.
  */
-static int powernv_eeh_configure_bridge(struct eeh_pe *pe)
+static int pnv_eeh_configure_bridge(struct eeh_pe *pe)
 {
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	int ret = 0;
-
-	if (phb->eeh_ops && phb->eeh_ops->configure_bridge)
-		ret = phb->eeh_ops->configure_bridge(pe);
-
-	return ret;
+	return 0;
 }
 
 /**
- * powernv_pe_err_inject - Inject specified error to the indicated PE
+ * pnv_pe_err_inject - Inject specified error to the indicated PE
  * @pe: the indicated PE
  * @type: error type
  * @func: specific error type
@@ -401,22 +1056,52 @@ static int powernv_eeh_configure_bridge(struct eeh_pe *pe)
  * determined by @type and @func, to the indicated PE for
  * testing purpose.
  */
-static int powernv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
-				  unsigned long addr, unsigned long mask)
+static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
+			      unsigned long addr, unsigned long mask)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	s64 rc;
+
+	/* Sanity check on error type */
+	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
+	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
+		pr_warn("%s: Invalid error type %d\n",
+			__func__, type);
+		return -ERANGE;
+	}
 
-	if (phb->eeh_ops && phb->eeh_ops->err_inject)
-		ret = phb->eeh_ops->err_inject(pe, type, func, addr, mask);
+	if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
+	    func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) {
+		pr_warn("%s: Invalid error function %d\n",
+			__func__, func);
+		return -ERANGE;
+	}
 
-	return ret;
+	/* Firmware supports error injection ? */
+	if (!opal_check_token(OPAL_PCI_ERR_INJECT)) {
+		pr_warn("%s: Firmware doesn't support error injection\n",
+			__func__);
+		return -ENXIO;
+	}
+
+	/* Do error injection */
+	rc = opal_pci_err_inject(phb->opal_id, pe->addr,
+				 type, func, addr, mask);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld injecting error "
+			"%d-%d to PHB#%x-PE#%x\n",
+			__func__, rc, type, func,
+			hose->global_number, pe->addr);
+		return -EIO;
+	}
+
+	return 0;
 }
 
-static inline bool powernv_eeh_cfg_blocked(struct device_node *dn)
+static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn)
 {
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
 	if (!edev || !edev->pe)
 		return false;
@@ -427,51 +1112,377 @@ static inline bool powernv_eeh_cfg_blocked(struct device_node *dn)
 	return false;
 }
 
-static int powernv_eeh_read_config(struct device_node *dn,
-				   int where, int size, u32 *val)
+static int pnv_eeh_read_config(struct pci_dn *pdn,
+			       int where, int size, u32 *val)
 {
-	if (powernv_eeh_cfg_blocked(dn)) {
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (pnv_eeh_cfg_blocked(pdn)) {
 		*val = 0xFFFFFFFF;
 		return PCIBIOS_SET_FAILED;
 	}
 
-	return pnv_pci_cfg_read(dn, where, size, val);
+	return pnv_pci_cfg_read(pdn, where, size, val);
 }
 
-static int powernv_eeh_write_config(struct device_node *dn,
-				    int where, int size, u32 val)
+static int pnv_eeh_write_config(struct pci_dn *pdn,
+				int where, int size, u32 val)
 {
-	if (powernv_eeh_cfg_blocked(dn))
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (pnv_eeh_cfg_blocked(pdn))
 		return PCIBIOS_SET_FAILED;
 
-	return pnv_pci_cfg_write(dn, where, size, val);
+	return pnv_pci_cfg_write(pdn, where, size, val);
+}
+
+static void pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData *data)
+{
+	/* GEM */
+	if (data->gemXfir || data->gemRfir ||
+	    data->gemRirqfir || data->gemMask || data->gemRwof)
+		pr_info("  GEM: %016llx %016llx %016llx %016llx %016llx\n",
+			be64_to_cpu(data->gemXfir),
+			be64_to_cpu(data->gemRfir),
+			be64_to_cpu(data->gemRirqfir),
+			be64_to_cpu(data->gemMask),
+			be64_to_cpu(data->gemRwof));
+
+	/* LEM */
+	if (data->lemFir || data->lemErrMask ||
+	    data->lemAction0 || data->lemAction1 || data->lemWof)
+		pr_info("  LEM: %016llx %016llx %016llx %016llx %016llx\n",
+			be64_to_cpu(data->lemFir),
+			be64_to_cpu(data->lemErrMask),
+			be64_to_cpu(data->lemAction0),
+			be64_to_cpu(data->lemAction1),
+			be64_to_cpu(data->lemWof));
+}
+
+static void pnv_eeh_get_and_dump_hub_diag(struct pci_controller *hose)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag;
+	long rc;
+
+	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
+			__func__, phb->hub_id, rc);
+		return;
+	}
+
+	switch (data->type) {
+	case OPAL_P7IOC_DIAG_TYPE_RGC:
+		pr_info("P7IOC diag-data for RGC\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
+			pr_info("  RGC: %016llx %016llx\n",
+				be64_to_cpu(data->rgc.rgcStatus),
+				be64_to_cpu(data->rgc.rgcLdcp));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_BI:
+		pr_info("P7IOC diag-data for BI %s\n\n",
+			data->bi.biDownbound ? "Downbound" : "Upbound");
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
+		    data->bi.biLdcp2 || data->bi.biFenceStatus)
+			pr_info("  BI:  %016llx %016llx %016llx %016llx\n",
+				be64_to_cpu(data->bi.biLdcp0),
+				be64_to_cpu(data->bi.biLdcp1),
+				be64_to_cpu(data->bi.biLdcp2),
+				be64_to_cpu(data->bi.biFenceStatus));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_CI:
+		pr_info("P7IOC diag-data for CI Port %d\n\n",
+			data->ci.ciPort);
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
+			pr_info("  CI:  %016llx %016llx\n",
+				be64_to_cpu(data->ci.ciPortStatus),
+				be64_to_cpu(data->ci.ciPortLdcp));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_MISC:
+		pr_info("P7IOC diag-data for MISC\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_I2C:
+		pr_info("P7IOC diag-data for I2C\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		break;
+	default:
+		pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
+			__func__, phb->hub_id, data->type);
+	}
+}
+
+static int pnv_eeh_get_pe(struct pci_controller *hose,
+			  u16 pe_no, struct eeh_pe **pe)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct pnv_ioda_pe *pnv_pe;
+	struct eeh_pe *dev_pe;
+	struct eeh_dev edev;
+
+	/*
+	 * If PHB supports compound PE, to fetch
+	 * the master PE because slave PE is invisible
+	 * to EEH core.
+	 */
+	pnv_pe = &phb->ioda.pe_array[pe_no];
+	if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
+		pnv_pe = pnv_pe->master;
+		WARN_ON(!pnv_pe ||
+			!(pnv_pe->flags & PNV_IODA_PE_MASTER));
+		pe_no = pnv_pe->pe_number;
+	}
+
+	/* Find the PE according to PE# */
+	memset(&edev, 0, sizeof(struct eeh_dev));
+	edev.phb = hose;
+	edev.pe_config_addr = pe_no;
+	dev_pe = eeh_pe_get(&edev);
+	if (!dev_pe)
+		return -EEXIST;
+
+	/* Freeze the (compound) PE */
+	*pe = dev_pe;
+	if (!(dev_pe->state & EEH_PE_ISOLATED))
+		phb->freeze_pe(phb, pe_no);
+
+	/*
+	 * At this point, we're sure the (compound) PE should
+	 * have been frozen. However, we still need poke until
+	 * hitting the frozen PE on top level.
+	 */
+	dev_pe = dev_pe->parent;
+	while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
+		int ret;
+		int active_flags = (EEH_STATE_MMIO_ACTIVE |
+				    EEH_STATE_DMA_ACTIVE);
+
+		ret = eeh_ops->get_state(dev_pe, NULL);
+		if (ret <= 0 || (ret & active_flags) == active_flags) {
+			dev_pe = dev_pe->parent;
+			continue;
+		}
+
+		/* Frozen parent PE */
+		*pe = dev_pe;
+		if (!(dev_pe->state & EEH_PE_ISOLATED))
+			phb->freeze_pe(phb, dev_pe->addr);
+
+		/* Next one */
+		dev_pe = dev_pe->parent;
+	}
+
+	return 0;
 }
 
 /**
- * powernv_eeh_next_error - Retrieve next EEH error to handle
+ * pnv_eeh_next_error - Retrieve next EEH error to handle
  * @pe: Affected PE
  *
- * Using OPAL API, to retrieve next EEH error for EEH core to handle
+ * The function is expected to be called by EEH core while it gets
+ * special EEH event (without binding PE). The function calls to
+ * OPAL APIs for next error to handle. The informational error is
+ * handled internally by platform. However, the dead IOC, dead PHB,
+ * fenced PHB and frozen PE should be handled by EEH core eventually.
  */
-static int powernv_eeh_next_error(struct eeh_pe **pe)
+static int pnv_eeh_next_error(struct eeh_pe **pe)
 {
 	struct pci_controller *hose;
-	struct pnv_phb *phb = NULL;
+	struct pnv_phb *phb;
+	struct eeh_pe *phb_pe, *parent_pe;
+	__be64 frozen_pe_no;
+	__be16 err_type, severity;
+	int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+	long rc;
+	int state, ret = EEH_NEXT_ERR_NONE;
+
+	/*
+	 * While running here, it's safe to purge the event queue.
+	 * And we should keep the cached OPAL notifier event sychronized
+	 * between the kernel and firmware.
+	 */
+	eeh_remove_event(NULL, false);
+	opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
 
 	list_for_each_entry(hose, &hose_list, list_node) {
+		/*
+		 * If the subordinate PCI buses of the PHB has been
+		 * removed or is exactly under error recovery, we
+		 * needn't take care of it any more.
+		 */
 		phb = hose->private_data;
-		break;
-	}
+		phb_pe = eeh_phb_pe_get(hose);
+		if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
+			continue;
+
+		rc = opal_pci_next_error(phb->opal_id,
+					 &frozen_pe_no, &err_type, &severity);
+		if (rc != OPAL_SUCCESS) {
+			pr_devel("%s: Invalid return value on "
+				 "PHB#%x (0x%lx) from opal_pci_next_error",
+				 __func__, hose->global_number, rc);
+			continue;
+		}
+
+		/* If the PHB doesn't have error, stop processing */
+		if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
+		    be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
+			pr_devel("%s: No error found on PHB#%x\n",
+				 __func__, hose->global_number);
+			continue;
+		}
+
+		/*
+		 * Processing the error. We're expecting the error with
+		 * highest priority reported upon multiple errors on the
+		 * specific PHB.
+		 */
+		pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
+			__func__, be16_to_cpu(err_type),
+			be16_to_cpu(severity), be64_to_cpu(frozen_pe_no),
+			hose->global_number);
+		switch (be16_to_cpu(err_type)) {
+		case OPAL_EEH_IOC_ERROR:
+			if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
+				pr_err("EEH: dead IOC detected\n");
+				ret = EEH_NEXT_ERR_DEAD_IOC;
+			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+				pr_info("EEH: IOC informative error "
+					"detected\n");
+				pnv_eeh_get_and_dump_hub_diag(hose);
+				ret = EEH_NEXT_ERR_NONE;
+			}
+
+			break;
+		case OPAL_EEH_PHB_ERROR:
+			if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
+				*pe = phb_pe;
+				pr_err("EEH: dead PHB#%x detected, "
+				       "location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_DEAD_PHB;
+			} else if (be16_to_cpu(severity) ==
+				   OPAL_EEH_SEV_PHB_FENCED) {
+				*pe = phb_pe;
+				pr_err("EEH: Fenced PHB#%x detected, "
+				       "location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_FENCED_PHB;
+			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+				pr_info("EEH: PHB#%x informative error "
+					"detected, location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				pnv_eeh_get_phb_diag(phb_pe);
+				pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
+				ret = EEH_NEXT_ERR_NONE;
+			}
+
+			break;
+		case OPAL_EEH_PE_ERROR:
+			/*
+			 * If we can't find the corresponding PE, we
+			 * just try to unfreeze.
+			 */
+			if (pnv_eeh_get_pe(hose,
+				be64_to_cpu(frozen_pe_no), pe)) {
+				/* Try best to clear it */
+				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
+					hose->global_number, frozen_pe_no);
+				pr_info("EEH: PHB location: %s\n",
+					eeh_pe_loc_get(phb_pe));
+				opal_pci_eeh_freeze_clear(phb->opal_id,
+					frozen_pe_no,
+					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+				ret = EEH_NEXT_ERR_NONE;
+			} else if ((*pe)->state & EEH_PE_ISOLATED ||
+				   eeh_pe_passed(*pe)) {
+				ret = EEH_NEXT_ERR_NONE;
+			} else {
+				pr_err("EEH: Frozen PE#%x "
+				       "on PHB#%x detected\n",
+				       (*pe)->addr,
+					(*pe)->phb->global_number);
+				pr_err("EEH: PE location: %s, "
+				       "PHB location: %s\n",
+				       eeh_pe_loc_get(*pe),
+				       eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_FROZEN_PE;
+			}
+
+			break;
+		default:
+			pr_warn("%s: Unexpected error type %d\n",
+				__func__, be16_to_cpu(err_type));
+		}
 
-	if (phb && phb->eeh_ops->next_error)
-		return phb->eeh_ops->next_error(pe);
+		/*
+		 * EEH core will try recover from fenced PHB or
+		 * frozen PE. In the time for frozen PE, EEH core
+		 * enable IO path for that before collecting logs,
+		 * but it ruins the site. So we have to dump the
+		 * log in advance here.
+		 */
+		if ((ret == EEH_NEXT_ERR_FROZEN_PE  ||
+		    ret == EEH_NEXT_ERR_FENCED_PHB) &&
+		    !((*pe)->state & EEH_PE_ISOLATED)) {
+			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+			pnv_eeh_get_phb_diag(*pe);
+
+			if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+				pnv_pci_dump_phb_diag_data((*pe)->phb,
+							   (*pe)->data);
+		}
 
-	return -EEXIST;
+		/*
+		 * We probably have the frozen parent PE out there and
+		 * we need have to handle frozen parent PE firstly.
+		 */
+		if (ret == EEH_NEXT_ERR_FROZEN_PE) {
+			parent_pe = (*pe)->parent;
+			while (parent_pe) {
+				/* Hit the ceiling ? */
+				if (parent_pe->type & EEH_PE_PHB)
+					break;
+
+				/* Frozen parent PE ? */
+				state = eeh_ops->get_state(parent_pe, NULL);
+				if (state > 0 &&
+				    (state & active_flags) != active_flags)
+					*pe = parent_pe;
+
+				/* Next parent level */
+				parent_pe = parent_pe->parent;
+			}
+
+			/* We possibly migrate to another PE */
+			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+		}
+
+		/*
+		 * If we have no errors on the specific PHB or only
+		 * informative error there, we continue poking it.
+		 * Otherwise, we need actions to be taken by upper
+		 * layer.
+		 */
+		if (ret > EEH_NEXT_ERR_INF)
+			break;
+	}
+
+	return ret;
 }
 
-static int powernv_eeh_restore_config(struct device_node *dn)
+static int pnv_eeh_restore_config(struct pci_dn *pdn)
 {
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 	struct pnv_phb *phb;
 	s64 ret;
 
@@ -490,24 +1501,23 @@ static int powernv_eeh_restore_config(struct device_node *dn)
 	return 0;
 }
 
-static struct eeh_ops powernv_eeh_ops = {
+static struct eeh_ops pnv_eeh_ops = {
 	.name                   = "powernv",
-	.init                   = powernv_eeh_init,
-	.post_init              = powernv_eeh_post_init,
-	.of_probe               = NULL,
-	.dev_probe              = powernv_eeh_dev_probe,
-	.set_option             = powernv_eeh_set_option,
-	.get_pe_addr            = powernv_eeh_get_pe_addr,
-	.get_state              = powernv_eeh_get_state,
-	.reset                  = powernv_eeh_reset,
-	.wait_state             = powernv_eeh_wait_state,
-	.get_log                = powernv_eeh_get_log,
-	.configure_bridge       = powernv_eeh_configure_bridge,
-	.err_inject		= powernv_eeh_err_inject,
-	.read_config            = powernv_eeh_read_config,
-	.write_config           = powernv_eeh_write_config,
-	.next_error		= powernv_eeh_next_error,
-	.restore_config		= powernv_eeh_restore_config
+	.init                   = pnv_eeh_init,
+	.post_init              = pnv_eeh_post_init,
+	.probe			= pnv_eeh_probe,
+	.set_option             = pnv_eeh_set_option,
+	.get_pe_addr            = pnv_eeh_get_pe_addr,
+	.get_state              = pnv_eeh_get_state,
+	.reset                  = pnv_eeh_reset,
+	.wait_state             = pnv_eeh_wait_state,
+	.get_log                = pnv_eeh_get_log,
+	.configure_bridge       = pnv_eeh_configure_bridge,
+	.err_inject		= pnv_eeh_err_inject,
+	.read_config            = pnv_eeh_read_config,
+	.write_config           = pnv_eeh_write_config,
+	.next_error		= pnv_eeh_next_error,
+	.restore_config		= pnv_eeh_restore_config
 };
 
 /**
@@ -521,7 +1531,7 @@ static int __init eeh_powernv_init(void)
 	int ret = -EINVAL;
 
 	eeh_set_pe_aux_size(PNV_PCI_DIAG_BUF_SIZE);
-	ret = eeh_ops_register(&powernv_eeh_ops);
+	ret = eeh_ops_register(&pnv_eeh_ops);
 	if (!ret)
 		pr_info("EEH: PowerNV platform initialized\n");
 	else
diff --git a/arch/powerpc/platforms/powernv/opal-dump.c b/arch/powerpc/platforms/powernv/opal-dump.c
index 23260f7..5aa9c1c 100644
--- a/arch/powerpc/platforms/powernv/opal-dump.c
+++ b/arch/powerpc/platforms/powernv/opal-dump.c
@@ -452,5 +452,6 @@ void __init opal_platform_dump_init(void)
 		return;
 	}
 
-	opal_dump_resend_notification();
+	if (opal_check_token(OPAL_DUMP_RESEND))
+		opal_dump_resend_notification();
 }
diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c
index 518fe95..38ce757 100644
--- a/arch/powerpc/platforms/powernv/opal-elog.c
+++ b/arch/powerpc/platforms/powernv/opal-elog.c
@@ -313,7 +313,8 @@ int __init opal_elog_init(void)
 	}
 
 	/* We are now ready to pull error logs from opal. */
-	opal_resend_pending_logs();
+	if (opal_check_token(OPAL_ELOG_RESEND))
+		opal_resend_pending_logs();
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c
index 5c21d9c..4ec6219 100644
--- a/arch/powerpc/platforms/powernv/opal-flash.c
+++ b/arch/powerpc/platforms/powernv/opal-flash.c
@@ -120,7 +120,11 @@ static struct image_header_t	image_header;
 static struct image_data_t	image_data;
 static struct validate_flash_t	validate_flash_data;
 static struct manage_flash_t	manage_flash_data;
-static struct update_flash_t	update_flash_data;
+
+/* Initialize update_flash_data status to No Operation */
+static struct update_flash_t	update_flash_data = {
+	.status = FLASH_NO_OP,
+};
 
 static DEFINE_MUTEX(image_data_mutex);
 
@@ -542,7 +546,7 @@ static struct attribute_group image_op_attr_group = {
 	.attrs = image_op_attrs,
 };
 
-void __init opal_flash_init(void)
+void __init opal_flash_update_init(void)
 {
 	int ret;
 
diff --git a/arch/powerpc/platforms/powernv/opal-nvram.c b/arch/powerpc/platforms/powernv/opal-nvram.c
index f9896fd..9db4398 100644
--- a/arch/powerpc/platforms/powernv/opal-nvram.c
+++ b/arch/powerpc/platforms/powernv/opal-nvram.c
@@ -16,6 +16,7 @@
 #include <linux/of.h>
 
 #include <asm/opal.h>
+#include <asm/nvram.h>
 #include <asm/machdep.h>
 
 static unsigned int nvram_size;
@@ -62,6 +63,15 @@ static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+static int __init opal_nvram_init_log_partitions(void)
+{
+	/* Scan nvram for partitions */
+	nvram_scan_partitions();
+	nvram_init_oops_partition(0);
+	return 0;
+}
+machine_arch_initcall(powernv, opal_nvram_init_log_partitions);
+
 void __init opal_nvram_init(void)
 {
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c b/arch/powerpc/platforms/powernv/opal-sensor.c
index 4ab67ef..6552504 100644
--- a/arch/powerpc/platforms/powernv/opal-sensor.c
+++ b/arch/powerpc/platforms/powernv/opal-sensor.c
@@ -46,18 +46,28 @@ int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data)
 
 	mutex_lock(&opal_sensor_mutex);
 	ret = opal_sensor_read(sensor_hndl, token, &data);
-	if (ret != OPAL_ASYNC_COMPLETION)
-		goto out_token;
+	switch (ret) {
+	case OPAL_ASYNC_COMPLETION:
+		ret = opal_async_wait_response(token, &msg);
+		if (ret) {
+			pr_err("%s: Failed to wait for the async response, %d\n",
+			       __func__, ret);
+			goto out_token;
+		}
 
-	ret = opal_async_wait_response(token, &msg);
-	if (ret) {
-		pr_err("%s: Failed to wait for the async response, %d\n",
-				__func__, ret);
-		goto out_token;
-	}
+		ret = opal_error_code(be64_to_cpu(msg.params[1]));
+		*sensor_data = be32_to_cpu(data);
+		break;
+
+	case OPAL_SUCCESS:
+		ret = 0;
+		*sensor_data = be32_to_cpu(data);
+		break;
 
-	*sensor_data = be32_to_cpu(data);
-	ret = be64_to_cpu(msg.params[1]);
+	default:
+		ret = opal_error_code(ret);
+		break;
+	}
 
 out_token:
 	mutex_unlock(&opal_sensor_mutex);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index fcbe899..a7ade94 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -286,9 +286,12 @@ OPAL_CALL(opal_handle_hmi,			OPAL_HANDLE_HMI);
 OPAL_CALL(opal_slw_set_reg,			OPAL_SLW_SET_REG);
 OPAL_CALL(opal_register_dump_region,		OPAL_REGISTER_DUMP_REGION);
 OPAL_CALL(opal_unregister_dump_region,		OPAL_UNREGISTER_DUMP_REGION);
-OPAL_CALL(opal_pci_set_phb_cxl_mode,		OPAL_PCI_SET_PHB_CXL_MODE);
+OPAL_CALL(opal_pci_set_phb_cxl_mode,		OPAL_PCI_SET_PHB_CAPI_MODE);
 OPAL_CALL(opal_tpo_write,			OPAL_WRITE_TPO);
 OPAL_CALL(opal_tpo_read,			OPAL_READ_TPO);
 OPAL_CALL(opal_ipmi_send,			OPAL_IPMI_SEND);
 OPAL_CALL(opal_ipmi_recv,			OPAL_IPMI_RECV);
 OPAL_CALL(opal_i2c_request,			OPAL_I2C_REQUEST);
+OPAL_CALL(opal_flash_read,			OPAL_FLASH_READ);
+OPAL_CALL(opal_flash_write,			OPAL_FLASH_WRITE);
+OPAL_CALL(opal_flash_erase,			OPAL_FLASH_ERASE);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 18fd4e7..2241565 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -23,6 +23,8 @@
 #include <linux/kobject.h>
 #include <linux/delay.h>
 #include <linux/memblock.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
 
 #include <asm/machdep.h>
 #include <asm/opal.h>
@@ -58,6 +60,7 @@ static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX];
 static DEFINE_SPINLOCK(opal_notifier_lock);
 static uint64_t last_notified_mask = 0x0ul;
 static atomic_t opal_notifier_hold = ATOMIC_INIT(0);
+static uint32_t opal_heartbeat;
 
 static void opal_reinit_cores(void)
 {
@@ -302,23 +305,26 @@ void opal_notifier_disable(void)
  * Opal message notifier based on message type. Allow subscribers to get
  * notified for specific messgae type.
  */
-int opal_message_notifier_register(enum OpalMessageType msg_type,
+int opal_message_notifier_register(enum opal_msg_type msg_type,
 					struct notifier_block *nb)
 {
-	if (!nb) {
-		pr_warning("%s: Invalid argument (%p)\n",
-			   __func__, nb);
-		return -EINVAL;
-	}
-	if (msg_type > OPAL_MSG_TYPE_MAX) {
-		pr_warning("%s: Invalid message type argument (%d)\n",
+	if (!nb || msg_type >= OPAL_MSG_TYPE_MAX) {
+		pr_warning("%s: Invalid arguments, msg_type:%d\n",
 			   __func__, msg_type);
 		return -EINVAL;
 	}
+
 	return atomic_notifier_chain_register(
 				&opal_msg_notifier_head[msg_type], nb);
 }
 
+int opal_message_notifier_unregister(enum opal_msg_type msg_type,
+				     struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(
+			&opal_msg_notifier_head[msg_type], nb);
+}
+
 static void opal_message_do_notify(uint32_t msg_type, void *msg)
 {
 	/* notify subscribers */
@@ -351,7 +357,7 @@ static void opal_handle_message(void)
 	type = be32_to_cpu(msg.msg_type);
 
 	/* Sanity check */
-	if (type > OPAL_MSG_TYPE_MAX) {
+	if (type >= OPAL_MSG_TYPE_MAX) {
 		pr_warning("%s: Unknown message type: %u\n", __func__, type);
 		return;
 	}
@@ -665,6 +671,9 @@ static void __init opal_dump_region_init(void)
 	uint64_t size;
 	int rc;
 
+	if (!opal_check_token(OPAL_REGISTER_DUMP_REGION))
+		return;
+
 	/* Register kernel log buffer */
 	addr = log_buf_addr_get();
 	if (addr == NULL)
@@ -684,6 +693,15 @@ static void __init opal_dump_region_init(void)
 			"rc = %d\n", rc);
 }
 
+static void opal_flash_init(struct device_node *opal_node)
+{
+	struct device_node *np;
+
+	for_each_child_of_node(opal_node, np)
+		if (of_device_is_compatible(np, "ibm,opal-flash"))
+			of_platform_device_create(np, NULL, NULL);
+}
+
 static void opal_ipmi_init(struct device_node *opal_node)
 {
 	struct device_node *np;
@@ -741,6 +759,29 @@ static void __init opal_irq_init(struct device_node *dn)
 	}
 }
 
+static int kopald(void *unused)
+{
+	set_freezable();
+	do {
+		try_to_freeze();
+		opal_poll_events(NULL);
+		msleep_interruptible(opal_heartbeat);
+	} while (!kthread_should_stop());
+
+	return 0;
+}
+
+static void opal_init_heartbeat(void)
+{
+	/* Old firwmware, we assume the HVC heartbeat is sufficient */
+	if (of_property_read_u32(opal_node, "ibm,heartbeat-ms",
+				 &opal_heartbeat) != 0)
+		opal_heartbeat = 0;
+
+	if (opal_heartbeat)
+		kthread_run(kopald, NULL, "kopald");
+}
+
 static int __init opal_init(void)
 {
 	struct device_node *np, *consoles;
@@ -769,6 +810,9 @@ static int __init opal_init(void)
 	/* Create i2c platform devices */
 	opal_i2c_create_devs();
 
+	/* Setup a heatbeat thread if requested by OPAL */
+	opal_init_heartbeat();
+
 	/* Find all OPAL interrupts and request them */
 	opal_irq_init(opal_node);
 
@@ -782,7 +826,7 @@ static int __init opal_init(void)
 		/* Setup error log interface */
 		rc = opal_elog_init();
 		/* Setup code update interface */
-		opal_flash_init();
+		opal_flash_update_init();
 		/* Setup platform dump extract interface */
 		opal_platform_dump_init();
 		/* Setup system parameters interface */
@@ -791,8 +835,11 @@ static int __init opal_init(void)
 		opal_msglog_init();
 	}
 
+	/* Initialize OPAL IPMI backend */
 	opal_ipmi_init(opal_node);
 
+	opal_flash_init(opal_node);
+
 	return 0;
 }
 machine_subsys_initcall(powernv, opal_init);
@@ -823,13 +870,17 @@ void opal_shutdown(void)
 	}
 
 	/* Unregister memory dump region */
-	opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF);
+	if (opal_check_token(OPAL_UNREGISTER_DUMP_REGION))
+		opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF);
 }
 
 /* Export this so that test modules can use it */
 EXPORT_SYMBOL_GPL(opal_invalid_call);
 EXPORT_SYMBOL_GPL(opal_ipmi_send);
 EXPORT_SYMBOL_GPL(opal_ipmi_recv);
+EXPORT_SYMBOL_GPL(opal_flash_read);
+EXPORT_SYMBOL_GPL(opal_flash_write);
+EXPORT_SYMBOL_GPL(opal_flash_erase);
 
 /* Convert a region of vmalloc memory to an opal sg list */
 struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
@@ -894,6 +945,25 @@ void opal_free_sg_list(struct opal_sg_list *sg)
 	}
 }
 
+int opal_error_code(int rc)
+{
+	switch (rc) {
+	case OPAL_SUCCESS:		return 0;
+
+	case OPAL_PARAMETER:		return -EINVAL;
+	case OPAL_ASYNC_COMPLETION:	return -EINPROGRESS;
+	case OPAL_BUSY_EVENT:		return -EBUSY;
+	case OPAL_NO_MEM:		return -ENOMEM;
+
+	case OPAL_UNSUPPORTED:		return -EIO;
+	case OPAL_HARDWARE:		return -EIO;
+	case OPAL_INTERNAL_ERROR:	return -EIO;
+	default:
+		pr_err("%s: unexpected OPAL error %d\n", __func__, rc);
+		return -EIO;
+	}
+}
+
 EXPORT_SYMBOL_GPL(opal_poll_events);
 EXPORT_SYMBOL_GPL(opal_rtc_read);
 EXPORT_SYMBOL_GPL(opal_rtc_write);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6c9ff2b..920c252 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -44,6 +44,9 @@
 #include "powernv.h"
 #include "pci.h"
 
+/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
+#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
+
 static void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 			    const char *fmt, ...)
 {
@@ -56,11 +59,18 @@ static void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 	vaf.fmt = fmt;
 	vaf.va = &args;
 
-	if (pe->pdev)
+	if (pe->flags & PNV_IODA_PE_DEV)
 		strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
-	else
+	else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
 		sprintf(pfix, "%04x:%02x     ",
 			pci_domain_nr(pe->pbus), pe->pbus->number);
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		sprintf(pfix, "%04x:%02x:%2x.%d",
+			pci_domain_nr(pe->parent_dev->bus),
+			(pe->rid & 0xff00) >> 8,
+			PCI_SLOT(pe->rid), PCI_FUNC(pe->rid));
+#endif /* CONFIG_PCI_IOV*/
 
 	printk("%spci %s: [PE# %.3d] %pV",
 	       level, pfix, pe->pe_number, &vaf);
@@ -591,7 +601,7 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 			      bool is_add)
 {
 	struct pnv_ioda_pe *slave;
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = NULL;
 	int ret;
 
 	/*
@@ -630,8 +640,12 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 
 	if (pe->flags & (PNV_IODA_PE_BUS_ALL | PNV_IODA_PE_BUS))
 		pdev = pe->pbus->self;
-	else
+	else if (pe->flags & PNV_IODA_PE_DEV)
 		pdev = pe->pdev->bus->self;
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		pdev = pe->parent_dev->bus->self;
+#endif /* CONFIG_PCI_IOV */
 	while (pdev) {
 		struct pci_dn *pdn = pci_get_pdn(pdev);
 		struct pnv_ioda_pe *parent;
@@ -649,6 +663,87 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 	return 0;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *parent;
+	uint8_t bcomp, dcomp, fcomp;
+	int64_t rc;
+	long rid_end, rid;
+
+	/* Currently, we just deconfigure VF PE. Bus PE will always there.*/
+	if (pe->pbus) {
+		int count;
+
+		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+		parent = pe->pbus->self;
+		if (pe->flags & PNV_IODA_PE_BUS_ALL)
+			count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+		else
+			count = 1;
+
+		switch(count) {
+		case  1: bcomp = OpalPciBusAll;         break;
+		case  2: bcomp = OpalPciBus7Bits;       break;
+		case  4: bcomp = OpalPciBus6Bits;       break;
+		case  8: bcomp = OpalPciBus5Bits;       break;
+		case 16: bcomp = OpalPciBus4Bits;       break;
+		case 32: bcomp = OpalPciBus3Bits;       break;
+		default:
+			dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n",
+			        count);
+			/* Do an exact match only */
+			bcomp = OpalPciBusAll;
+		}
+		rid_end = pe->rid + (count << 8);
+	} else {
+		if (pe->flags & PNV_IODA_PE_VF)
+			parent = pe->parent_dev;
+		else
+			parent = pe->pdev->bus->self;
+		bcomp = OpalPciBusAll;
+		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+		rid_end = pe->rid + 1;
+	}
+
+	/* Clear the reverse map */
+	for (rid = pe->rid; rid < rid_end; rid++)
+		phb->ioda.pe_rmap[rid] = 0;
+
+	/* Release from all parents PELT-V */
+	while (parent) {
+		struct pci_dn *pdn = pci_get_pdn(parent);
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+						pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+			/* XXX What to do in case of error ? */
+		}
+		parent = parent->bus->self;
+	}
+
+	opal_pci_eeh_freeze_set(phb->opal_id, pe->pe_number,
+				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+	/* Disassociate PE in PELT */
+	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+				pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+	if (rc)
+		pe_warn(pe, "OPAL error %ld remove self from PELTV\n", rc);
+	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+			     bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
+	if (rc)
+		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+
+	pe->pbus = NULL;
+	pe->pdev = NULL;
+	pe->parent_dev = NULL;
+
+	return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
 static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 {
 	struct pci_dev *parent;
@@ -675,15 +770,19 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		case 16: bcomp = OpalPciBus4Bits;	break;
 		case 32: bcomp = OpalPciBus3Bits;	break;
 		default:
-			pr_err("%s: Number of subordinate busses %d"
-			       " unsupported\n",
-			       pci_name(pe->pbus->self), count);
+			dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n",
+			        count);
 			/* Do an exact match only */
 			bcomp = OpalPciBusAll;
 		}
 		rid_end = pe->rid + (count << 8);
 	} else {
-		parent = pe->pdev->bus->self;
+#ifdef CONFIG_PCI_IOV
+		if (pe->flags & PNV_IODA_PE_VF)
+			parent = pe->parent_dev;
+		else
+#endif /* CONFIG_PCI_IOV */
+			parent = pe->pdev->bus->self;
 		bcomp = OpalPciBusAll;
 		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
 		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
@@ -774,6 +873,78 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
 	return 10;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
+{
+	struct pci_dn *pdn = pci_get_pdn(dev);
+	int i;
+	struct resource *res, res2;
+	resource_size_t size;
+	u16 num_vfs;
+
+	if (!dev->is_physfn)
+		return -EINVAL;
+
+	/*
+	 * "offset" is in VFs.  The M64 windows are sized so that when they
+	 * are segmented, each segment is the same size as the IOV BAR.
+	 * Each segment is in a separate PE, and the high order bits of the
+	 * address are the PE number.  Therefore, each VF's BAR is in a
+	 * separate PE, and changing the IOV BAR start address changes the
+	 * range of PEs the VFs are in.
+	 */
+	num_vfs = pdn->num_vfs;
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || !res->parent)
+			continue;
+
+		if (!pnv_pci_is_mem_pref_64(res->flags))
+			continue;
+
+		/*
+		 * The actual IOV BAR range is determined by the start address
+		 * and the actual size for num_vfs VFs BAR.  This check is to
+		 * make sure that after shifting, the range will not overlap
+		 * with another device.
+		 */
+		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
+		res2.flags = res->flags;
+		res2.start = res->start + (size * offset);
+		res2.end = res2.start + (size * num_vfs) - 1;
+
+		if (res2.end > res->end) {
+			dev_err(&dev->dev, "VF BAR%d: %pR would extend past %pR (trying to enable %d VFs shifted by %d)\n",
+				i, &res2, res, num_vfs, offset);
+			return -EBUSY;
+		}
+	}
+
+	/*
+	 * After doing so, there would be a "hole" in the /proc/iomem when
+	 * offset is a positive value. It looks like the device return some
+	 * mmio back to the system, which actually no one could use it.
+	 */
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || !res->parent)
+			continue;
+
+		if (!pnv_pci_is_mem_pref_64(res->flags))
+			continue;
+
+		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
+		res2 = *res;
+		res->start += size * offset;
+
+		dev_info(&dev->dev, "VF BAR%d: %pR shifted to %pR (enabling %d VFs shifted by %d)\n",
+			 i, &res2, res, num_vfs, offset);
+		pci_update_resource(dev, i + PCI_IOV_RESOURCES);
+	}
+	return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
 #if 0
 static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 {
@@ -857,7 +1028,6 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 				pci_name(dev));
 			continue;
 		}
-		pdn->pcidev = dev;
 		pdn->pe_number = pe->pe_number;
 		pe->dma_weight += pnv_ioda_dma_weight(dev);
 		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
@@ -916,6 +1086,10 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
 		return;
 	}
 
+	pe->tce32_table = kzalloc_node(sizeof(struct iommu_table),
+			GFP_KERNEL, hose->node);
+	pe->tce32_table->data = pe;
+
 	/* Associate it with all child devices */
 	pnv_ioda_setup_same_PE(bus, pe);
 
@@ -974,6 +1148,441 @@ static void pnv_pci_ioda_setup_PEs(void)
 	}
 }
 
+#ifdef CONFIG_PCI_IOV
+static int pnv_pci_vf_release_m64(struct pci_dev *pdev)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	int                    i, j;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
+		for (j = 0; j < M64_PER_IOV; j++) {
+			if (pdn->m64_wins[i][j] == IODA_INVALID_M64)
+				continue;
+			opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 0);
+			clear_bit(pdn->m64_wins[i][j], &phb->ioda.m64_bar_alloc);
+			pdn->m64_wins[i][j] = IODA_INVALID_M64;
+		}
+
+	return 0;
+}
+
+static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	unsigned int           win;
+	struct resource       *res;
+	int                    i, j;
+	int64_t                rc;
+	int                    total_vfs;
+	resource_size_t        size, start;
+	int                    pe_num;
+	int                    vf_groups;
+	int                    vf_per_group;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+	total_vfs = pci_sriov_get_totalvfs(pdev);
+
+	/* Initialize the m64_wins to IODA_INVALID_M64 */
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
+		for (j = 0; j < M64_PER_IOV; j++)
+			pdn->m64_wins[i][j] = IODA_INVALID_M64;
+
+	if (pdn->m64_per_iov == M64_PER_IOV) {
+		vf_groups = (num_vfs <= M64_PER_IOV) ? num_vfs: M64_PER_IOV;
+		vf_per_group = (num_vfs <= M64_PER_IOV)? 1:
+			roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
+	} else {
+		vf_groups = 1;
+		vf_per_group = 1;
+	}
+
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &pdev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || !res->parent)
+			continue;
+
+		if (!pnv_pci_is_mem_pref_64(res->flags))
+			continue;
+
+		for (j = 0; j < vf_groups; j++) {
+			do {
+				win = find_next_zero_bit(&phb->ioda.m64_bar_alloc,
+						phb->ioda.m64_bar_idx + 1, 0);
+
+				if (win >= phb->ioda.m64_bar_idx + 1)
+					goto m64_failed;
+			} while (test_and_set_bit(win, &phb->ioda.m64_bar_alloc));
+
+			pdn->m64_wins[i][j] = win;
+
+			if (pdn->m64_per_iov == M64_PER_IOV) {
+				size = pci_iov_resource_size(pdev,
+							PCI_IOV_RESOURCES + i);
+				size = size * vf_per_group;
+				start = res->start + size * j;
+			} else {
+				size = resource_size(res);
+				start = res->start;
+			}
+
+			/* Map the M64 here */
+			if (pdn->m64_per_iov == M64_PER_IOV) {
+				pe_num = pdn->offset + j;
+				rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+						pe_num, OPAL_M64_WINDOW_TYPE,
+						pdn->m64_wins[i][j], 0);
+			}
+
+			rc = opal_pci_set_phb_mem_window(phb->opal_id,
+						 OPAL_M64_WINDOW_TYPE,
+						 pdn->m64_wins[i][j],
+						 start,
+						 0, /* unused */
+						 size);
+
+
+			if (rc != OPAL_SUCCESS) {
+				dev_err(&pdev->dev, "Failed to map M64 window #%d: %lld\n",
+					win, rc);
+				goto m64_failed;
+			}
+
+			if (pdn->m64_per_iov == M64_PER_IOV)
+				rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				     OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 2);
+			else
+				rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				     OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 1);
+
+			if (rc != OPAL_SUCCESS) {
+				dev_err(&pdev->dev, "Failed to enable M64 window #%d: %llx\n",
+					win, rc);
+				goto m64_failed;
+			}
+		}
+	}
+	return 0;
+
+m64_failed:
+	pnv_pci_vf_release_m64(pdev);
+	return -EBUSY;
+}
+
+static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev, struct pnv_ioda_pe *pe)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct iommu_table    *tbl;
+	unsigned long         addr;
+	int64_t               rc;
+
+	bus = dev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	tbl = pe->tce32_table;
+	addr = tbl->it_base;
+
+	opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
+				   pe->pe_number << 1, 1, __pa(addr),
+				   0, 0x1000);
+
+	rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+				        pe->pe_number,
+				        (pe->pe_number << 1) + 1,
+				        pe->tce_bypass_base,
+				        0);
+	if (rc)
+		pe_warn(pe, "OPAL error %ld release DMA window\n", rc);
+
+	iommu_free_table(tbl, of_node_full_name(dev->dev.of_node));
+	free_pages(addr, get_order(TCE32_TABLE_SIZE));
+	pe->tce32_table = NULL;
+}
+
+static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pnv_ioda_pe    *pe, *pe_n;
+	struct pci_dn         *pdn;
+	u16                    vf_index;
+	int64_t                rc;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	if (!pdev->is_physfn)
+		return;
+
+	if (pdn->m64_per_iov == M64_PER_IOV && num_vfs > M64_PER_IOV) {
+		int   vf_group;
+		int   vf_per_group;
+		int   vf_index1;
+
+		vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
+
+		for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++)
+			for (vf_index = vf_group * vf_per_group;
+				vf_index < (vf_group + 1) * vf_per_group &&
+				vf_index < num_vfs;
+				vf_index++)
+				for (vf_index1 = vf_group * vf_per_group;
+					vf_index1 < (vf_group + 1) * vf_per_group &&
+					vf_index1 < num_vfs;
+					vf_index1++){
+
+					rc = opal_pci_set_peltv(phb->opal_id,
+						pdn->offset + vf_index,
+						pdn->offset + vf_index1,
+						OPAL_REMOVE_PE_FROM_DOMAIN);
+
+					if (rc)
+					    dev_warn(&pdev->dev, "%s: Failed to unlink same group PE#%d(%lld)\n",
+						__func__,
+						pdn->offset + vf_index1, rc);
+				}
+	}
+
+	list_for_each_entry_safe(pe, pe_n, &phb->ioda.pe_list, list) {
+		if (pe->parent_dev != pdev)
+			continue;
+
+		pnv_pci_ioda2_release_dma_pe(pdev, pe);
+
+		/* Remove from list */
+		mutex_lock(&phb->ioda.pe_list_mutex);
+		list_del(&pe->list);
+		mutex_unlock(&phb->ioda.pe_list_mutex);
+
+		pnv_ioda_deconfigure_pe(phb, pe);
+
+		pnv_ioda_free_pe(phb, pe->pe_number);
+	}
+}
+
+void pnv_pci_sriov_disable(struct pci_dev *pdev)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	struct pci_sriov      *iov;
+	u16 num_vfs;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+	iov = pdev->sriov;
+	num_vfs = pdn->num_vfs;
+
+	/* Release VF PEs */
+	pnv_ioda_release_vf_PE(pdev, num_vfs);
+
+	if (phb->type == PNV_PHB_IODA2) {
+		if (pdn->m64_per_iov == 1)
+			pnv_pci_vf_resource_shift(pdev, -pdn->offset);
+
+		/* Release M64 windows */
+		pnv_pci_vf_release_m64(pdev);
+
+		/* Release PE numbers */
+		bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
+		pdn->offset = 0;
+	}
+}
+
+static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+				       struct pnv_ioda_pe *pe);
+static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pnv_ioda_pe    *pe;
+	int                    pe_num;
+	u16                    vf_index;
+	struct pci_dn         *pdn;
+	int64_t                rc;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	if (!pdev->is_physfn)
+		return;
+
+	/* Reserve PE for each VF */
+	for (vf_index = 0; vf_index < num_vfs; vf_index++) {
+		pe_num = pdn->offset + vf_index;
+
+		pe = &phb->ioda.pe_array[pe_num];
+		pe->pe_number = pe_num;
+		pe->phb = phb;
+		pe->flags = PNV_IODA_PE_VF;
+		pe->pbus = NULL;
+		pe->parent_dev = pdev;
+		pe->tce32_seg = -1;
+		pe->mve_number = -1;
+		pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
+			   pci_iov_virtfn_devfn(pdev, vf_index);
+
+		pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%d\n",
+			hose->global_number, pdev->bus->number,
+			PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
+			PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
+
+		if (pnv_ioda_configure_pe(phb, pe)) {
+			/* XXX What do we do here ? */
+			if (pe_num)
+				pnv_ioda_free_pe(phb, pe_num);
+			pe->pdev = NULL;
+			continue;
+		}
+
+		pe->tce32_table = kzalloc_node(sizeof(struct iommu_table),
+				GFP_KERNEL, hose->node);
+		pe->tce32_table->data = pe;
+
+		/* Put PE to the list */
+		mutex_lock(&phb->ioda.pe_list_mutex);
+		list_add_tail(&pe->list, &phb->ioda.pe_list);
+		mutex_unlock(&phb->ioda.pe_list_mutex);
+
+		pnv_pci_ioda2_setup_dma_pe(phb, pe);
+	}
+
+	if (pdn->m64_per_iov == M64_PER_IOV && num_vfs > M64_PER_IOV) {
+		int   vf_group;
+		int   vf_per_group;
+		int   vf_index1;
+
+		vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
+
+		for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++) {
+			for (vf_index = vf_group * vf_per_group;
+			     vf_index < (vf_group + 1) * vf_per_group &&
+			     vf_index < num_vfs;
+			     vf_index++) {
+				for (vf_index1 = vf_group * vf_per_group;
+				     vf_index1 < (vf_group + 1) * vf_per_group &&
+				     vf_index1 < num_vfs;
+				     vf_index1++) {
+
+					rc = opal_pci_set_peltv(phb->opal_id,
+						pdn->offset + vf_index,
+						pdn->offset + vf_index1,
+						OPAL_ADD_PE_TO_DOMAIN);
+
+					if (rc)
+					    dev_warn(&pdev->dev, "%s: Failed to link same group PE#%d(%lld)\n",
+						__func__,
+						pdn->offset + vf_index1, rc);
+				}
+			}
+		}
+	}
+}
+
+int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	int                    ret;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	if (phb->type == PNV_PHB_IODA2) {
+		/* Calculate available PE for required VFs */
+		mutex_lock(&phb->ioda.pe_alloc_mutex);
+		pdn->offset = bitmap_find_next_zero_area(
+			phb->ioda.pe_alloc, phb->ioda.total_pe,
+			0, num_vfs, 0);
+		if (pdn->offset >= phb->ioda.total_pe) {
+			mutex_unlock(&phb->ioda.pe_alloc_mutex);
+			dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs);
+			pdn->offset = 0;
+			return -EBUSY;
+		}
+		bitmap_set(phb->ioda.pe_alloc, pdn->offset, num_vfs);
+		pdn->num_vfs = num_vfs;
+		mutex_unlock(&phb->ioda.pe_alloc_mutex);
+
+		/* Assign M64 window accordingly */
+		ret = pnv_pci_vf_assign_m64(pdev, num_vfs);
+		if (ret) {
+			dev_info(&pdev->dev, "Not enough M64 window resources\n");
+			goto m64_failed;
+		}
+
+		/*
+		 * When using one M64 BAR to map one IOV BAR, we need to shift
+		 * the IOV BAR according to the PE# allocated to the VFs.
+		 * Otherwise, the PE# for the VF will conflict with others.
+		 */
+		if (pdn->m64_per_iov == 1) {
+			ret = pnv_pci_vf_resource_shift(pdev, pdn->offset);
+			if (ret)
+				goto m64_failed;
+		}
+	}
+
+	/* Setup VF PEs */
+	pnv_ioda_setup_vf_PE(pdev, num_vfs);
+
+	return 0;
+
+m64_failed:
+	bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
+	pdn->offset = 0;
+
+	return ret;
+}
+
+int pcibios_sriov_disable(struct pci_dev *pdev)
+{
+	pnv_pci_sriov_disable(pdev);
+
+	/* Release PCI data */
+	remove_dev_pci_data(pdev);
+	return 0;
+}
+
+int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
+{
+	/* Allocate PCI data */
+	add_dev_pci_data(pdev);
+
+	pnv_pci_sriov_enable(pdev, num_vfs);
+	return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
 static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
@@ -989,7 +1598,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
 
 	pe = &phb->ioda.pe_array[pdn->pe_number];
 	WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
-	set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table);
+	set_iommu_table_base_and_group(&pdev->dev, pe->tce32_table);
 }
 
 static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
@@ -1016,7 +1625,7 @@ static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
 	} else {
 		dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
 		set_dma_ops(&pdev->dev, &dma_iommu_ops);
-		set_iommu_table_base(&pdev->dev, &pe->tce32_table);
+		set_iommu_table_base(&pdev->dev, pe->tce32_table);
 	}
 	*pdev->dev.dma_mask = dma_mask;
 	return 0;
@@ -1053,9 +1662,9 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (add_to_iommu_group)
 			set_iommu_table_base_and_group(&dev->dev,
-						       &pe->tce32_table);
+						       pe->tce32_table);
 		else
-			set_iommu_table_base(&dev->dev, &pe->tce32_table);
+			set_iommu_table_base(&dev->dev, pe->tce32_table);
 
 		if (dev->subordinate)
 			pnv_ioda_setup_bus_dma(pe, dev->subordinate,
@@ -1145,8 +1754,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
 				 __be64 *startp, __be64 *endp, bool rm)
 {
-	struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
-					      tce32_table);
+	struct pnv_ioda_pe *pe = tbl->data;
 	struct pnv_phb *phb = pe->phb;
 
 	if (phb->type == PNV_PHB_IODA1)
@@ -1167,9 +1775,6 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 	int64_t rc;
 	void *addr;
 
-	/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
-#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
-
 	/* XXX FIXME: Handle 64-bit only DMA devices */
 	/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
 	/* XXX FIXME: Allocate multi-level tables on PHB3 */
@@ -1212,7 +1817,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 	}
 
 	/* Setup linux iommu table */
-	tbl = &pe->tce32_table;
+	tbl = pe->tce32_table;
 	pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
 				  base << 28, IOMMU_PAGE_SHIFT_4K);
 
@@ -1232,12 +1837,19 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 				 TCE_PCI_SWINV_PAIR);
 	}
 	iommu_init_table(tbl, phb->hose->node);
-	iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
 
-	if (pe->pdev)
+	if (pe->flags & PNV_IODA_PE_DEV) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
-	else
+	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		pnv_ioda_setup_bus_dma(pe, pe->pbus, true);
+	} else if (pe->flags & PNV_IODA_PE_VF) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
+	}
 
 	return;
  fail:
@@ -1250,8 +1862,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 
 static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable)
 {
-	struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
-					      tce32_table);
+	struct pnv_ioda_pe *pe = tbl->data;
 	uint16_t window_id = (pe->pe_number << 1 ) + 1;
 	int64_t rc;
 
@@ -1296,10 +1907,10 @@ static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb,
 	pe->tce_bypass_base = 1ull << 59;
 
 	/* Install set_bypass callback for VFIO */
-	pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass;
+	pe->tce32_table->set_bypass = pnv_pci_ioda2_set_bypass;
 
 	/* Enable bypass by default */
-	pnv_pci_ioda2_set_bypass(&pe->tce32_table, true);
+	pnv_pci_ioda2_set_bypass(pe->tce32_table, true);
 }
 
 static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
@@ -1347,7 +1958,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 	}
 
 	/* Setup linux iommu table */
-	tbl = &pe->tce32_table;
+	tbl = pe->tce32_table;
 	pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0,
 			IOMMU_PAGE_SHIFT_4K);
 
@@ -1365,12 +1976,19 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
 	}
 	iommu_init_table(tbl, phb->hose->node);
-	iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
 
-	if (pe->pdev)
+	if (pe->flags & PNV_IODA_PE_DEV) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
-	else
+	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		pnv_ioda_setup_bus_dma(pe, pe->pbus, true);
+	} else if (pe->flags & PNV_IODA_PE_VF) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
+	}
 
 	/* Also create a bypass window */
 	if (!pnv_iommu_bypass_disabled)
@@ -1731,6 +2349,73 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
 static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
 #endif /* CONFIG_PCI_MSI */
 
+#ifdef CONFIG_PCI_IOV
+static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+	struct resource *res;
+	int i;
+	resource_size_t size;
+	struct pci_dn *pdn;
+	int mul, total_vfs;
+
+	if (!pdev->is_physfn || pdev->is_added)
+		return;
+
+	hose = pci_bus_to_host(pdev->bus);
+	phb = hose->private_data;
+
+	pdn = pci_get_pdn(pdev);
+	pdn->vfs_expanded = 0;
+
+	total_vfs = pci_sriov_get_totalvfs(pdev);
+	pdn->m64_per_iov = 1;
+	mul = phb->ioda.total_pe;
+
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &pdev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || res->parent)
+			continue;
+		if (!pnv_pci_is_mem_pref_64(res->flags)) {
+			dev_warn(&pdev->dev, " non M64 VF BAR%d: %pR\n",
+				 i, res);
+			continue;
+		}
+
+		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
+
+		/* bigger than 64M */
+		if (size > (1 << 26)) {
+			dev_info(&pdev->dev, "PowerNV: VF BAR%d: %pR IOV size is bigger than 64M, roundup power2\n",
+				 i, res);
+			pdn->m64_per_iov = M64_PER_IOV;
+			mul = roundup_pow_of_two(total_vfs);
+			break;
+		}
+	}
+
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &pdev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || res->parent)
+			continue;
+		if (!pnv_pci_is_mem_pref_64(res->flags)) {
+			dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
+				 i, res);
+			continue;
+		}
+
+		dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
+		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
+		res->end = res->start + size * mul - 1;
+		dev_dbg(&pdev->dev, "                       %pR\n", res);
+		dev_info(&pdev->dev, "VF BAR%d: %pR (expanded to %d VFs for PE alignment)",
+			 i, res, mul);
+	}
+	pdn->vfs_expanded = mul;
+}
+#endif /* CONFIG_PCI_IOV */
+
 /*
  * This function is supposed to be called on basis of PE from top
  * to bottom style. So the the I/O or MMIO segment assigned to
@@ -1777,7 +2462,8 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
 				region.start += phb->ioda.io_segsize;
 				index++;
 			}
-		} else if (res->flags & IORESOURCE_MEM) {
+		} else if ((res->flags & IORESOURCE_MEM) &&
+			   !pnv_pci_is_mem_pref_64(res->flags)) {
 			region.start = res->start -
 				       hose->mem_offset[0] -
 				       phb->ioda.m32_pci_base;
@@ -1907,10 +2593,29 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
 	return phb->ioda.io_segsize;
 }
 
+#ifdef CONFIG_PCI_IOV
+static resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev,
+						      int resno)
+{
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+	resource_size_t align, iov_align;
+
+	iov_align = resource_size(&pdev->resource[resno]);
+	if (iov_align)
+		return iov_align;
+
+	align = pci_iov_resource_size(pdev, resno);
+	if (pdn->vfs_expanded)
+		return pdn->vfs_expanded * align;
+
+	return align;
+}
+#endif /* CONFIG_PCI_IOV */
+
 /* Prevent enabling devices for which we couldn't properly
  * assign a PE
  */
-static int pnv_pci_enable_device_hook(struct pci_dev *dev)
+static bool pnv_pci_enable_device_hook(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct pnv_phb *phb = hose->private_data;
@@ -1922,13 +2627,13 @@ static int pnv_pci_enable_device_hook(struct pci_dev *dev)
 	 * PEs isn't ready.
 	 */
 	if (!phb->initialized)
-		return 0;
+		return true;
 
 	pdn = pci_get_pdn(dev);
 	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
-		return -EINVAL;
+		return false;
 
-	return 0;
+	return true;
 }
 
 static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
@@ -1988,9 +2693,11 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		hose->last_busno = 0xff;
 	}
 	hose->private_data = phb;
+	hose->controller_ops = pnv_pci_controller_ops;
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
 	phb->type = ioda_type;
+	mutex_init(&phb->ioda.pe_alloc_mutex);
 
 	/* Detect specific models for error handling */
 	if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
@@ -2050,6 +2757,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 
 	INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
 	INIT_LIST_HEAD(&phb->ioda.pe_list);
+	mutex_init(&phb->ioda.pe_list_mutex);
 
 	/* Calculate how many 32-bit TCE segments we have */
 	phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
@@ -2078,9 +2786,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	phb->get_pe_state = pnv_ioda_get_pe_state;
 	phb->freeze_pe = pnv_ioda_freeze_pe;
 	phb->unfreeze_pe = pnv_ioda_unfreeze_pe;
-#ifdef CONFIG_EEH
-	phb->eeh_ops = &ioda_eeh_ops;
-#endif
 
 	/* Setup RID -> PE mapping function */
 	phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
@@ -2104,9 +2809,15 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	 * the child P2P bridges) can form individual PE.
 	 */
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
-	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
-	ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
-	ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
+	pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
+	pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
+	pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
+
+#ifdef CONFIG_PCI_IOV
+	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
+	ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
+#endif
+
 	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
 
 	/* Reset IODA tables to a clean state */
@@ -2121,8 +2832,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	 */
 	if (is_kdump_kernel()) {
 		pr_info("  Issue PHB reset ...\n");
-		ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
-		ioda_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
+		pnv_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
+		pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
 	}
 
 	/* Remove M64 resource if we can't configure it successfully */
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index 6ef6d4d..4729ca7 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -133,6 +133,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
 	phb->hose->first_busno = 0;
 	phb->hose->last_busno = 0xff;
 	phb->hose->private_data = phb;
+	phb->hose->controller_ops = pnv_pci_controller_ops;
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
 	phb->type = PNV_PHB_P5IOC2;
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 54323d6..bca2aeb 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -366,9 +366,9 @@ static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
 	spin_unlock_irqrestore(&phb->lock, flags);
 }
 
-static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
-				     struct device_node *dn)
+static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 {
+	struct pnv_phb *phb = pdn->phb->private_data;
 	u8	fstate;
 	__be16	pcierr;
 	int	pe_no;
@@ -379,7 +379,7 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	 * setup that yet. So all ER errors should be mapped to
 	 * reserved PE.
 	 */
-	pe_no = PCI_DN(dn)->pe_number;
+	pe_no = pdn->pe_number;
 	if (pe_no == IODA_INVALID_PE) {
 		if (phb->type == PNV_PHB_P5IOC2)
 			pe_no = 0;
@@ -407,8 +407,7 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	}
 
 	cfg_dbg(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
-		(PCI_DN(dn)->busno << 8) | (PCI_DN(dn)->devfn),
-		pe_no, fstate);
+		(pdn->busno << 8) | (pdn->devfn), pe_no, fstate);
 
 	/* Clear the frozen state if applicable */
 	if (fstate == OPAL_EEH_STOPPED_MMIO_FREEZE ||
@@ -425,10 +424,9 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	}
 }
 
-int pnv_pci_cfg_read(struct device_node *dn,
+int pnv_pci_cfg_read(struct pci_dn *pdn,
 		     int where, int size, u32 *val)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
 	struct pnv_phb *phb = pdn->phb->private_data;
 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
 	s64 rc;
@@ -462,10 +460,9 @@ int pnv_pci_cfg_read(struct device_node *dn,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-int pnv_pci_cfg_write(struct device_node *dn,
+int pnv_pci_cfg_write(struct pci_dn *pdn,
 		      int where, int size, u32 val)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
 	struct pnv_phb *phb = pdn->phb->private_data;
 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
 
@@ -489,18 +486,17 @@ int pnv_pci_cfg_write(struct device_node *dn,
 }
 
 #if CONFIG_EEH
-static bool pnv_pci_cfg_check(struct pci_controller *hose,
-			      struct device_node *dn)
+static bool pnv_pci_cfg_check(struct pci_dn *pdn)
 {
 	struct eeh_dev *edev = NULL;
-	struct pnv_phb *phb = hose->private_data;
+	struct pnv_phb *phb = pdn->phb->private_data;
 
 	/* EEH not enabled ? */
 	if (!(phb->flags & PNV_PHB_FLAG_EEH))
 		return true;
 
 	/* PE reset or device removed ? */
-	edev = of_node_to_eeh_dev(dn);
+	edev = pdn->edev;
 	if (edev) {
 		if (edev->pe &&
 		    (edev->pe->state & EEH_PE_CFG_BLOCKED))
@@ -513,8 +509,7 @@ static bool pnv_pci_cfg_check(struct pci_controller *hose,
 	return true;
 }
 #else
-static inline pnv_pci_cfg_check(struct pci_controller *hose,
-				struct device_node *dn)
+static inline pnv_pci_cfg_check(struct pci_dn *pdn)
 {
 	return true;
 }
@@ -524,32 +519,26 @@ static int pnv_pci_read_config(struct pci_bus *bus,
 			       unsigned int devfn,
 			       int where, int size, u32 *val)
 {
-	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
 	struct pci_dn *pdn;
 	struct pnv_phb *phb;
-	bool found = false;
 	int ret;
 
 	*val = 0xFFFFFFFF;
-	for (dn = busdn->child; dn; dn = dn->sibling) {
-		pdn = PCI_DN(dn);
-		if (pdn && pdn->devfn == devfn) {
-			phb = pdn->phb->private_data;
-			found = true;
-			break;
-		}
-	}
+	pdn = pci_get_pdn_by_devfn(bus, devfn);
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+	if (!pnv_pci_cfg_check(pdn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	ret = pnv_pci_cfg_read(dn, where, size, val);
-	if (phb->flags & PNV_PHB_FLAG_EEH) {
+	ret = pnv_pci_cfg_read(pdn, where, size, val);
+	phb = pdn->phb->private_data;
+	if (phb->flags & PNV_PHB_FLAG_EEH && pdn->edev) {
 		if (*val == EEH_IO_ERROR_VALUE(size) &&
-		    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+		    eeh_dev_check_failure(pdn->edev))
                         return PCIBIOS_DEVICE_NOT_FOUND;
 	} else {
-		pnv_pci_config_check_eeh(phb, dn);
+		pnv_pci_config_check_eeh(pdn);
 	}
 
 	return ret;
@@ -559,27 +548,21 @@ static int pnv_pci_write_config(struct pci_bus *bus,
 				unsigned int devfn,
 				int where, int size, u32 val)
 {
-	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
 	struct pci_dn *pdn;
 	struct pnv_phb *phb;
-	bool found = false;
 	int ret;
 
-	for (dn = busdn->child; dn; dn = dn->sibling) {
-		pdn = PCI_DN(dn);
-		if (pdn && pdn->devfn == devfn) {
-			phb = pdn->phb->private_data;
-			found = true;
-			break;
-		}
-	}
+	pdn = pci_get_pdn_by_devfn(bus, devfn);
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+	if (!pnv_pci_cfg_check(pdn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	ret = pnv_pci_cfg_write(dn, where, size, val);
+	ret = pnv_pci_cfg_write(pdn, where, size, val);
+	phb = pdn->phb->private_data;
 	if (!(phb->flags & PNV_PHB_FLAG_EEH))
-		pnv_pci_config_check_eeh(phb, dn);
+		pnv_pci_config_check_eeh(pdn);
 
 	return ret;
 }
@@ -679,66 +662,31 @@ void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 	tbl->it_type = TCE_PCI;
 }
 
-static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
-{
-	struct iommu_table *tbl;
-	const __be64 *basep, *swinvp;
-	const __be32 *sizep;
-
-	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
-	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
-	if (basep == NULL || sizep == NULL) {
-		pr_err("PCI: %s has missing tce entries !\n",
-		       hose->dn->full_name);
-		return NULL;
-	}
-	tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
-	if (WARN_ON(!tbl))
-		return NULL;
-	pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
-				  be32_to_cpup(sizep), 0, IOMMU_PAGE_SHIFT_4K);
-	iommu_init_table(tbl, hose->node);
-	iommu_register_group(tbl, pci_domain_nr(hose->bus), 0);
-
-	/* Deal with SW invalidated TCEs when needed (BML way) */
-	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
-				 NULL);
-	if (swinvp) {
-		tbl->it_busno = be64_to_cpu(swinvp[1]);
-		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
-		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
-	}
-	return tbl;
-}
-
-static void pnv_pci_dma_fallback_setup(struct pci_controller *hose,
-				       struct pci_dev *pdev)
-{
-	struct device_node *np = pci_bus_to_OF_node(hose->bus);
-	struct pci_dn *pdn;
-
-	if (np == NULL)
-		return;
-	pdn = PCI_DN(np);
-	if (!pdn->iommu_table)
-		pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
-	if (!pdn->iommu_table)
-		return;
-	set_iommu_table_base_and_group(&pdev->dev, pdn->iommu_table);
-}
-
 static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
+#ifdef CONFIG_PCI_IOV
+	struct pnv_ioda_pe *pe;
+	struct pci_dn *pdn;
+
+	/* Fix the VF pdn PE number */
+	if (pdev->is_virtfn) {
+		pdn = pci_get_pdn(pdev);
+		WARN_ON(pdn->pe_number != IODA_INVALID_PE);
+		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+			if (pe->rid == ((pdev->bus->number << 8) |
+			    (pdev->devfn & 0xff))) {
+				pdn->pe_number = pe->pe_number;
+				pe->pdev = pdev;
+				break;
+			}
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
 
-	/* If we have no phb structure, try to setup a fallback based on
-	 * the device-tree (RTAS PCI for example)
-	 */
 	if (phb && phb->dma_dev_setup)
 		phb->dma_dev_setup(phb, pdev);
-	else
-		pnv_pci_dma_fallback_setup(hose, pdev);
 }
 
 int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
@@ -784,44 +732,36 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
 void __init pnv_pci_init(void)
 {
 	struct device_node *np;
+	bool found_ioda = false;
 
 	pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
 
-	/* OPAL absent, try POPAL first then RTAS detection of PHBs */
-	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
-#ifdef CONFIG_PPC_POWERNV_RTAS
-		init_pci_config_tokens();
-		find_and_init_phbs();
-#endif /* CONFIG_PPC_POWERNV_RTAS */
-	}
-	/* OPAL is here, do our normal stuff */
-	else {
-		int found_ioda = 0;
+	/* If we don't have OPAL, eg. in sim, just skip PCI probe */
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return;
 
-		/* Look for IODA IO-Hubs. We don't support mixing IODA
-		 * and p5ioc2 due to the need to change some global
-		 * probing flags
-		 */
-		for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
-			pnv_pci_init_ioda_hub(np);
-			found_ioda = 1;
-		}
+	/* Look for IODA IO-Hubs. We don't support mixing IODA
+	 * and p5ioc2 due to the need to change some global
+	 * probing flags
+	 */
+	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
+		pnv_pci_init_ioda_hub(np);
+		found_ioda = true;
+	}
 
-		/* Look for p5ioc2 IO-Hubs */
-		if (!found_ioda)
-			for_each_compatible_node(np, NULL, "ibm,p5ioc2")
-				pnv_pci_init_p5ioc2_hub(np);
+	/* Look for p5ioc2 IO-Hubs */
+	if (!found_ioda)
+		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+			pnv_pci_init_p5ioc2_hub(np);
 
-		/* Look for ioda2 built-in PHB3's */
-		for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
-			pnv_pci_init_ioda2_phb(np);
-	}
+	/* Look for ioda2 built-in PHB3's */
+	for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
+		pnv_pci_init_ioda2_phb(np);
 
 	/* Setup the linkage between OF nodes and PHBs */
 	pci_devs_phb_init();
 
 	/* Configure IOMMU DMA hooks */
-	ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
 	ppc_md.tce_build = pnv_tce_build_vm;
 	ppc_md.tce_free = pnv_tce_free_vm;
 	ppc_md.tce_build_rm = pnv_tce_build_rm;
@@ -837,3 +777,7 @@ void __init pnv_pci_init(void)
 }
 
 machine_subsys_initcall_sync(powernv, tce_iommu_bus_notifier_init);
+
+struct pci_controller_ops pnv_pci_controller_ops = {
+	.dma_dev_setup = pnv_pci_dma_dev_setup,
+};
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 6c02ff8..070ee88 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -23,6 +23,7 @@ enum pnv_phb_model {
 #define PNV_IODA_PE_BUS_ALL	(1 << 2)	/* PE has subordinate buses	*/
 #define PNV_IODA_PE_MASTER	(1 << 3)	/* Master PE in compound case	*/
 #define PNV_IODA_PE_SLAVE	(1 << 4)	/* Slave PE in compound case	*/
+#define PNV_IODA_PE_VF		(1 << 5)	/* PE for one VF 		*/
 
 /* Data associated with a PE, including IOMMU tracking etc.. */
 struct pnv_phb;
@@ -34,6 +35,9 @@ struct pnv_ioda_pe {
 	 * entire bus (& children). In the former case, pdev
 	 * is populated, in the later case, pbus is.
 	 */
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev          *parent_dev;
+#endif
 	struct pci_dev		*pdev;
 	struct pci_bus		*pbus;
 
@@ -53,7 +57,7 @@ struct pnv_ioda_pe {
 	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
 	int			tce32_seg;
 	int			tce32_segcount;
-	struct iommu_table	tce32_table;
+	struct iommu_table	*tce32_table;
 	phys_addr_t		tce_inval_reg_phys;
 
 	/* 64-bit TCE bypass region */
@@ -75,22 +79,6 @@ struct pnv_ioda_pe {
 	struct list_head	list;
 };
 
-/* IOC dependent EEH operations */
-#ifdef CONFIG_EEH
-struct pnv_eeh_ops {
-	int (*post_init)(struct pci_controller *hose);
-	int (*set_option)(struct eeh_pe *pe, int option);
-	int (*get_state)(struct eeh_pe *pe);
-	int (*reset)(struct eeh_pe *pe, int option);
-	int (*get_log)(struct eeh_pe *pe, int severity,
-		       char *drv_log, unsigned long len);
-	int (*configure_bridge)(struct eeh_pe *pe);
-	int (*err_inject)(struct eeh_pe *pe, int type, int func,
-			  unsigned long addr, unsigned long mask);
-	int (*next_error)(struct eeh_pe **pe);
-};
-#endif /* CONFIG_EEH */
-
 #define PNV_PHB_FLAG_EEH	(1 << 0)
 
 struct pnv_phb {
@@ -104,10 +92,6 @@ struct pnv_phb {
 	int			initialized;
 	spinlock_t		lock;
 
-#ifdef CONFIG_EEH
-	struct pnv_eeh_ops	*eeh_ops;
-#endif
-
 #ifdef CONFIG_DEBUG_FS
 	int			has_dbgfs;
 	struct dentry		*dbgfs;
@@ -165,6 +149,8 @@ struct pnv_phb {
 
 			/* PE allocation bitmap */
 			unsigned long		*pe_alloc;
+			/* PE allocation mutex */
+			struct mutex		pe_alloc_mutex;
 
 			/* M32 & IO segment maps */
 			unsigned int		*m32_segmap;
@@ -179,6 +165,7 @@ struct pnv_phb {
 			 * on the sequence of creation
 			 */
 			struct list_head	pe_list;
+			struct mutex            pe_list_mutex;
 
 			/* Reverse map of PEs, will have to extend if
 			 * we are to support more than 256 PEs, indexed
@@ -213,15 +200,12 @@ struct pnv_phb {
 };
 
 extern struct pci_ops pnv_pci_ops;
-#ifdef CONFIG_EEH
-extern struct pnv_eeh_ops ioda_eeh_ops;
-#endif
 
 void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
 				unsigned char *log_buff);
-int pnv_pci_cfg_read(struct device_node *dn,
+int pnv_pci_cfg_read(struct pci_dn *pdn,
 		     int where, int size, u32 *val);
-int pnv_pci_cfg_write(struct device_node *dn,
+int pnv_pci_cfg_write(struct pci_dn *pdn,
 		      int where, int size, u32 val);
 extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
@@ -232,6 +216,6 @@ extern void pnv_pci_init_ioda2_phb(struct device_node *np);
 extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
 					__be64 *startp, __be64 *endp, bool rm);
 extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
-extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option);
+extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
 
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index 604c48e..826d2c9 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -29,6 +29,8 @@ static inline u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev)
 }
 #endif
 
+extern struct pci_controller_ops pnv_pci_controller_ops;
+
 extern u32 pnv_get_supported_cpuidle_states(void);
 
 extern void pnv_lpc_init(void);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index d2de7d5..16fdcb2 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -32,7 +32,6 @@
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/xics.h>
-#include <asm/rtas.h>
 #include <asm/opal.h>
 #include <asm/kexec.h>
 #include <asm/smp.h>
@@ -278,20 +277,6 @@ static void __init pnv_setup_machdep_opal(void)
 	ppc_md.handle_hmi_exception = opal_handle_hmi_exception;
 }
 
-#ifdef CONFIG_PPC_POWERNV_RTAS
-static void __init pnv_setup_machdep_rtas(void)
-{
-	if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
-		ppc_md.get_boot_time = rtas_get_boot_time;
-		ppc_md.get_rtc_time = rtas_get_rtc_time;
-		ppc_md.set_rtc_time = rtas_set_rtc_time;
-	}
-	ppc_md.restart = rtas_restart;
-	pm_power_off = rtas_power_off;
-	ppc_md.halt = rtas_halt;
-}
-#endif /* CONFIG_PPC_POWERNV_RTAS */
-
 static u32 supported_cpuidle_states;
 
 int pnv_save_sprs_for_winkle(void)
@@ -409,37 +394,39 @@ static int __init pnv_init_idle_states(void)
 {
 	struct device_node *power_mgt;
 	int dt_idle_states;
-	const __be32 *idle_state_flags;
-	u32 len_flags, flags;
+	u32 *flags;
 	int i;
 
 	supported_cpuidle_states = 0;
 
 	if (cpuidle_disable != IDLE_NO_OVERRIDE)
-		return 0;
+		goto out;
 
 	if (!firmware_has_feature(FW_FEATURE_OPALv3))
-		return 0;
+		goto out;
 
 	power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
 	if (!power_mgt) {
 		pr_warn("opal: PowerMgmt Node not found\n");
-		return 0;
+		goto out;
+	}
+	dt_idle_states = of_property_count_u32_elems(power_mgt,
+			"ibm,cpu-idle-state-flags");
+	if (dt_idle_states < 0) {
+		pr_warn("cpuidle-powernv: no idle states found in the DT\n");
+		goto out;
 	}
 
-	idle_state_flags = of_get_property(power_mgt,
-			"ibm,cpu-idle-state-flags", &len_flags);
-	if (!idle_state_flags) {
-		pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-flags\n");
-		return 0;
+	flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
+	if (of_property_read_u32_array(power_mgt,
+			"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
+		pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
+		goto out_free;
 	}
 
-	dt_idle_states = len_flags / sizeof(u32);
+	for (i = 0; i < dt_idle_states; i++)
+		supported_cpuidle_states |= flags[i];
 
-	for (i = 0; i < dt_idle_states; i++) {
-		flags = be32_to_cpu(idle_state_flags[i]);
-		supported_cpuidle_states |= flags;
-	}
 	if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
 		patch_instruction(
 			(unsigned int *)pnv_fastsleep_workaround_at_entry,
@@ -449,6 +436,9 @@ static int __init pnv_init_idle_states(void)
 			PPC_INST_NOP);
 	}
 	pnv_alloc_idle_core_states();
+out_free:
+	kfree(flags);
+out:
 	return 0;
 }
 
@@ -465,10 +455,6 @@ static int __init pnv_probe(void)
 
 	if (firmware_has_feature(FW_FEATURE_OPAL))
 		pnv_setup_machdep_opal();
-#ifdef CONFIG_PPC_POWERNV_RTAS
-	else if (rtas.base)
-		pnv_setup_machdep_rtas();
-#endif /* CONFIG_PPC_POWERNV_RTAS */
 
 	pr_debug("PowerNV detected !\n");
 
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 38a4508..8f70ba6 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -25,7 +25,6 @@
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
-#include <asm/rtas.h>
 #include <asm/vdso_datapage.h>
 #include <asm/cputhreads.h>
 #include <asm/xics.h>
@@ -251,18 +250,6 @@ void __init pnv_smp_init(void)
 {
 	smp_ops = &pnv_smp_ops;
 
-	/* XXX We don't yet have a proper entry point from HAL, for
-	 * now we rely on kexec-style entry from BML
-	 */
-
-#ifdef CONFIG_PPC_RTAS
-	/* Non-lpar has additional take/give timebase */
-	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = rtas_give_timebase;
-		smp_ops->take_timebase = rtas_take_timebase;
-	}
-#endif /* CONFIG_PPC_RTAS */
-
 #ifdef CONFIG_HOTPLUG_CPU
 	ppc_md.cpu_die	= pnv_smp_cpu_kill_self;
 #endif
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index b358bec..3c7707a 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -57,7 +57,7 @@ static void ps3_smp_message_pass(int cpu, int msg)
 			" (%d)\n", __func__, __LINE__, cpu, msg, result);
 }
 
-static int __init ps3_smp_probe(void)
+static void __init ps3_smp_probe(void)
 {
 	int cpu;
 
@@ -100,8 +100,6 @@ static int __init ps3_smp_probe(void)
 
 		DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
 	}
-
-	return 2;
 }
 
 void ps3_smp_cleanup_cpu(int cpu)
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index a758a9c..54c87d5 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -16,7 +16,6 @@ config PPC_PSERIES
 	select PPC_UDBG_16550
 	select PPC_NATIVE
 	select PPC_PCI_CHOICE if EXPERT
-	select ZLIB_DEFLATE
 	select PPC_DOORBELL
 	select HAVE_CONTEXT_TRACKING
 	select HOTPLUG_CPU if SMP
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index c22bb1b..b4b1109 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -10,6 +10,8 @@
  * 2 as published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt)	"dlpar: " fmt
+
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
@@ -535,13 +537,125 @@ static ssize_t dlpar_cpu_release(const char *buf, size_t count)
 	return count;
 }
 
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
+static int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_elog)
+{
+	int rc;
+
+	/* pseries error logs are in BE format, convert to cpu type */
+	switch (hp_elog->id_type) {
+	case PSERIES_HP_ELOG_ID_DRC_COUNT:
+		hp_elog->_drc_u.drc_count =
+					be32_to_cpu(hp_elog->_drc_u.drc_count);
+		break;
+	case PSERIES_HP_ELOG_ID_DRC_INDEX:
+		hp_elog->_drc_u.drc_index =
+					be32_to_cpu(hp_elog->_drc_u.drc_index);
+	}
+
+	switch (hp_elog->resource) {
+	case PSERIES_HP_ELOG_RESOURCE_MEM:
+		rc = dlpar_memory(hp_elog);
+		break;
+	default:
+		pr_warn_ratelimited("Invalid resource (%d) specified\n",
+				    hp_elog->resource);
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+static ssize_t dlpar_store(struct class *class, struct class_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct pseries_hp_errorlog *hp_elog;
+	const char *arg;
+	int rc;
+
+	hp_elog = kzalloc(sizeof(*hp_elog), GFP_KERNEL);
+	if (!hp_elog) {
+		rc = -ENOMEM;
+		goto dlpar_store_out;
+	}
+
+	/* Parse out the request from the user, this will be in the form
+	 * <resource> <action> <id_type> <id>
+	 */
+	arg = buf;
+	if (!strncmp(arg, "memory", 6)) {
+		hp_elog->resource = PSERIES_HP_ELOG_RESOURCE_MEM;
+		arg += strlen("memory ");
+	} else {
+		pr_err("Invalid resource specified: \"%s\"\n", buf);
+		rc = -EINVAL;
+		goto dlpar_store_out;
+	}
+
+	if (!strncmp(arg, "add", 3)) {
+		hp_elog->action = PSERIES_HP_ELOG_ACTION_ADD;
+		arg += strlen("add ");
+	} else if (!strncmp(arg, "remove", 6)) {
+		hp_elog->action = PSERIES_HP_ELOG_ACTION_REMOVE;
+		arg += strlen("remove ");
+	} else {
+		pr_err("Invalid action specified: \"%s\"\n", buf);
+		rc = -EINVAL;
+		goto dlpar_store_out;
+	}
+
+	if (!strncmp(arg, "index", 5)) {
+		u32 index;
+
+		hp_elog->id_type = PSERIES_HP_ELOG_ID_DRC_INDEX;
+		arg += strlen("index ");
+		if (kstrtou32(arg, 0, &index)) {
+			rc = -EINVAL;
+			pr_err("Invalid drc_index specified: \"%s\"\n", buf);
+			goto dlpar_store_out;
+		}
+
+		hp_elog->_drc_u.drc_index = cpu_to_be32(index);
+	} else if (!strncmp(arg, "count", 5)) {
+		u32 count;
+
+		hp_elog->id_type = PSERIES_HP_ELOG_ID_DRC_COUNT;
+		arg += strlen("count ");
+		if (kstrtou32(arg, 0, &count)) {
+			rc = -EINVAL;
+			pr_err("Invalid count specified: \"%s\"\n", buf);
+			goto dlpar_store_out;
+		}
+
+		hp_elog->_drc_u.drc_count = cpu_to_be32(count);
+	} else {
+		pr_err("Invalid id_type specified: \"%s\"\n", buf);
+		rc = -EINVAL;
+		goto dlpar_store_out;
+	}
+
+	rc = handle_dlpar_errorlog(hp_elog);
+
+dlpar_store_out:
+	kfree(hp_elog);
+	return rc ? rc : count;
+}
+
+static CLASS_ATTR(dlpar, S_IWUSR, NULL, dlpar_store);
+
 static int __init pseries_dlpar_init(void)
 {
+	int rc;
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
 	ppc_md.cpu_probe = dlpar_cpu_probe;
 	ppc_md.cpu_release = dlpar_cpu_release;
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
 
-	return 0;
+	rc = sysfs_create_file(kernel_kobj, &class_attr_dlpar.attr);
+
+	return rc;
 }
 machine_device_initcall(pseries, pseries_dlpar_init);
 
-#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index a6c7e19..2039397 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -118,9 +118,8 @@ static int pseries_eeh_init(void)
 	return 0;
 }
 
-static int pseries_eeh_cap_start(struct device_node *dn)
+static int pseries_eeh_cap_start(struct pci_dn *pdn)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
 	u32 status;
 
 	if (!pdn)
@@ -134,10 +133,9 @@ static int pseries_eeh_cap_start(struct device_node *dn)
 }
 
 
-static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
-	int pos = pseries_eeh_cap_start(dn);
+	int pos = pseries_eeh_cap_start(pdn);
 	int cnt = 48;	/* Maximal number of capabilities */
 	u32 id;
 
@@ -160,10 +158,9 @@ static int pseries_eeh_find_cap(struct device_node *dn, int cap)
 	return 0;
 }
 
-static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
+static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 	u32 header;
 	int pos = 256;
 	int ttl = (4096 - 256) / 8;
@@ -191,53 +188,44 @@ static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
 }
 
 /**
- * pseries_eeh_of_probe - EEH probe on the given device
- * @dn: OF node
- * @flag: Unused
+ * pseries_eeh_probe - EEH probe on the given device
+ * @pdn: PCI device node
+ * @data: Unused
  *
  * When EEH module is installed during system boot, all PCI devices
  * are checked one by one to see if it supports EEH. The function
  * is introduced for the purpose.
  */
-static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
+static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
-	struct pci_dn *pdn = PCI_DN(dn);
-	const __be32 *classp, *vendorp, *devicep;
-	u32 class_code;
-	const __be32 *regs;
 	u32 pcie_flags;
 	int enable = 0;
 	int ret;
 
 	/* Retrieve OF node and eeh device */
-	edev = of_node_to_eeh_dev(dn);
-	if (edev->pe || !of_device_is_available(dn))
+	edev = pdn_to_eeh_dev(pdn);
+	if (!edev || edev->pe)
 		return NULL;
 
-	/* Retrieve class/vendor/device IDs */
-	classp = of_get_property(dn, "class-code", NULL);
-	vendorp = of_get_property(dn, "vendor-id", NULL);
-	devicep = of_get_property(dn, "device-id", NULL);
-
-	/* Skip for bad OF node or PCI-ISA bridge */
-	if (!classp || !vendorp || !devicep)
-		return NULL;
-	if (dn->type && !strcmp(dn->type, "isa"))
+	/* Check class/vendor/device IDs */
+	if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
 		return NULL;
 
-	class_code = of_read_number(classp, 1);
+	/* Skip for PCI-ISA bridge */
+        if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
+		return NULL;
 
 	/*
 	 * Update class code and mode of eeh device. We need
 	 * correctly reflects that current device is root port
 	 * or PCIe switch downstream port.
 	 */
-	edev->class_code = class_code;
-	edev->pcix_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_PCIX);
-	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
-	edev->aer_cap = pseries_eeh_find_ecap(dn, PCI_EXT_CAP_ID_ERR);
+	edev->class_code = pdn->class_code;
+	edev->pcix_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->aer_cap = pseries_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
 	edev->mode &= 0xFFFFFF00;
 	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
@@ -252,24 +240,16 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 		}
 	}
 
-	/* Retrieve the device address */
-	regs = of_get_property(dn, "reg", NULL);
-	if (!regs) {
-		pr_warn("%s: OF node property %s::reg not found\n",
-			__func__, dn->full_name);
-		return NULL;
-	}
-
 	/* Initialize the fake PE */
 	memset(&pe, 0, sizeof(struct eeh_pe));
 	pe.phb = edev->phb;
-	pe.config_addr = of_read_number(regs, 1);
+	pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
 
 	/* Enable EEH on the device */
 	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
 	if (!ret) {
-		edev->config_addr = of_read_number(regs, 1);
 		/* Retrieve PE address */
+		edev->config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
 		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
 		pe.addr = edev->pe_config_addr;
 
@@ -285,16 +265,17 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 			eeh_add_flag(EEH_ENABLED);
 			eeh_add_to_parent_pe(edev);
 
-			pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
-				__func__, dn->full_name, pe.phb->global_number,
-				pe.addr, pe.config_addr);
-		} else if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
-			   (of_node_to_eeh_dev(dn->parent))->pe) {
+			pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%d-PE#%x\n",
+				__func__, pdn->busno, PCI_SLOT(pdn->devfn),
+				PCI_FUNC(pdn->devfn), pe.phb->global_number,
+				pe.addr);
+		} else if (pdn->parent && pdn_to_eeh_dev(pdn->parent) &&
+			   (pdn_to_eeh_dev(pdn->parent))->pe) {
 			/* This device doesn't support EEH, but it may have an
 			 * EEH parent, in which case we mark it as supported.
 			 */
-			edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
-			edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
+			edev->config_addr = pdn_to_eeh_dev(pdn->parent)->config_addr;
+			edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
 			eeh_add_to_parent_pe(edev);
 		}
 	}
@@ -670,45 +651,36 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
 
 /**
  * pseries_eeh_read_config - Read PCI config space
- * @dn: device node
+ * @pdn: PCI device node
  * @where: PCI address
  * @size: size to read
  * @val: return value
  *
  * Read config space from the speicifed device
  */
-static int pseries_eeh_read_config(struct device_node *dn, int where, int size, u32 *val)
+static int pseries_eeh_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
-	struct pci_dn *pdn;
-
-	pdn = PCI_DN(dn);
-
 	return rtas_read_config(pdn, where, size, val);
 }
 
 /**
  * pseries_eeh_write_config - Write PCI config space
- * @dn: device node
+ * @pdn: PCI device node
  * @where: PCI address
  * @size: size to write
  * @val: value to be written
  *
  * Write config space to the specified device
  */
-static int pseries_eeh_write_config(struct device_node *dn, int where, int size, u32 val)
+static int pseries_eeh_write_config(struct pci_dn *pdn, int where, int size, u32 val)
 {
-	struct pci_dn *pdn;
-
-	pdn = PCI_DN(dn);
-
 	return rtas_write_config(pdn, where, size, val);
 }
 
 static struct eeh_ops pseries_eeh_ops = {
 	.name			= "pseries",
 	.init			= pseries_eeh_init,
-	.of_probe		= pseries_eeh_of_probe,
-	.dev_probe		= NULL,
+	.probe			= pseries_eeh_probe,
 	.set_option		= pseries_eeh_set_option,
 	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index fa41f0d..0ced387 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -9,11 +9,14 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#define pr_fmt(fmt)	"pseries-hotplug-mem: " fmt
+
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/memblock.h>
 #include <linux/memory.h>
 #include <linux/memory_hotplug.h>
+#include <linux/slab.h>
 
 #include <asm/firmware.h>
 #include <asm/machdep.h>
@@ -21,6 +24,8 @@
 #include <asm/sparsemem.h>
 #include "pseries.h"
 
+static bool rtas_hp_event;
+
 unsigned long pseries_memory_block_size(void)
 {
 	struct device_node *np;
@@ -64,6 +69,67 @@ unsigned long pseries_memory_block_size(void)
 	return memblock_size;
 }
 
+static void dlpar_free_drconf_property(struct property *prop)
+{
+	kfree(prop->name);
+	kfree(prop->value);
+	kfree(prop);
+}
+
+static struct property *dlpar_clone_drconf_property(struct device_node *dn)
+{
+	struct property *prop, *new_prop;
+	struct of_drconf_cell *lmbs;
+	u32 num_lmbs, *p;
+	int i;
+
+	prop = of_find_property(dn, "ibm,dynamic-memory", NULL);
+	if (!prop)
+		return NULL;
+
+	new_prop = kzalloc(sizeof(*new_prop), GFP_KERNEL);
+	if (!new_prop)
+		return NULL;
+
+	new_prop->name = kstrdup(prop->name, GFP_KERNEL);
+	new_prop->value = kmalloc(prop->length, GFP_KERNEL);
+	if (!new_prop->name || !new_prop->value) {
+		dlpar_free_drconf_property(new_prop);
+		return NULL;
+	}
+
+	memcpy(new_prop->value, prop->value, prop->length);
+	new_prop->length = prop->length;
+
+	/* Convert the property to cpu endian-ness */
+	p = new_prop->value;
+	*p = be32_to_cpu(*p);
+
+	num_lmbs = *p++;
+	lmbs = (struct of_drconf_cell *)p;
+
+	for (i = 0; i < num_lmbs; i++) {
+		lmbs[i].base_addr = be64_to_cpu(lmbs[i].base_addr);
+		lmbs[i].drc_index = be32_to_cpu(lmbs[i].drc_index);
+		lmbs[i].flags = be32_to_cpu(lmbs[i].flags);
+	}
+
+	return new_prop;
+}
+
+static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb)
+{
+	unsigned long section_nr;
+	struct mem_section *mem_sect;
+	struct memory_block *mem_block;
+
+	section_nr = pfn_to_section_nr(PFN_DOWN(lmb->base_addr));
+	mem_sect = __nr_to_section(section_nr);
+
+	mem_block = find_memory_block(mem_sect);
+	return mem_block;
+}
+
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
 {
@@ -122,6 +188,173 @@ static int pseries_remove_mem_node(struct device_node *np)
 	pseries_remove_memblock(base, lmb_size);
 	return 0;
 }
+
+static bool lmb_is_removable(struct of_drconf_cell *lmb)
+{
+	int i, scns_per_block;
+	int rc = 1;
+	unsigned long pfn, block_sz;
+	u64 phys_addr;
+
+	if (!(lmb->flags & DRCONF_MEM_ASSIGNED))
+		return false;
+
+	block_sz = memory_block_size_bytes();
+	scns_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
+	phys_addr = lmb->base_addr;
+
+	for (i = 0; i < scns_per_block; i++) {
+		pfn = PFN_DOWN(phys_addr);
+		if (!pfn_present(pfn))
+			continue;
+
+		rc &= is_mem_section_removable(pfn, PAGES_PER_SECTION);
+		phys_addr += MIN_MEMORY_BLOCK_SIZE;
+	}
+
+	return rc ? true : false;
+}
+
+static int dlpar_add_lmb(struct of_drconf_cell *);
+
+static int dlpar_remove_lmb(struct of_drconf_cell *lmb)
+{
+	struct memory_block *mem_block;
+	unsigned long block_sz;
+	int nid, rc;
+
+	if (!lmb_is_removable(lmb))
+		return -EINVAL;
+
+	mem_block = lmb_to_memblock(lmb);
+	if (!mem_block)
+		return -EINVAL;
+
+	rc = device_offline(&mem_block->dev);
+	put_device(&mem_block->dev);
+	if (rc)
+		return rc;
+
+	block_sz = pseries_memory_block_size();
+	nid = memory_add_physaddr_to_nid(lmb->base_addr);
+
+	remove_memory(nid, lmb->base_addr, block_sz);
+
+	/* Update memory regions for memory remove */
+	memblock_remove(lmb->base_addr, block_sz);
+
+	dlpar_release_drc(lmb->drc_index);
+
+	lmb->flags &= ~DRCONF_MEM_ASSIGNED;
+	return 0;
+}
+
+static int dlpar_memory_remove_by_count(u32 lmbs_to_remove,
+					struct property *prop)
+{
+	struct of_drconf_cell *lmbs;
+	int lmbs_removed = 0;
+	int lmbs_available = 0;
+	u32 num_lmbs, *p;
+	int i, rc;
+
+	pr_info("Attempting to hot-remove %d LMB(s)\n", lmbs_to_remove);
+
+	if (lmbs_to_remove == 0)
+		return -EINVAL;
+
+	p = prop->value;
+	num_lmbs = *p++;
+	lmbs = (struct of_drconf_cell *)p;
+
+	/* Validate that there are enough LMBs to satisfy the request */
+	for (i = 0; i < num_lmbs; i++) {
+		if (lmbs[i].flags & DRCONF_MEM_ASSIGNED)
+			lmbs_available++;
+	}
+
+	if (lmbs_available < lmbs_to_remove)
+		return -EINVAL;
+
+	for (i = 0; i < num_lmbs && lmbs_removed < lmbs_to_remove; i++) {
+		rc = dlpar_remove_lmb(&lmbs[i]);
+		if (rc)
+			continue;
+
+		lmbs_removed++;
+
+		/* Mark this lmb so we can add it later if all of the
+		 * requested LMBs cannot be removed.
+		 */
+		lmbs[i].reserved = 1;
+	}
+
+	if (lmbs_removed != lmbs_to_remove) {
+		pr_err("Memory hot-remove failed, adding LMB's back\n");
+
+		for (i = 0; i < num_lmbs; i++) {
+			if (!lmbs[i].reserved)
+				continue;
+
+			rc = dlpar_add_lmb(&lmbs[i]);
+			if (rc)
+				pr_err("Failed to add LMB back, drc index %x\n",
+				       lmbs[i].drc_index);
+
+			lmbs[i].reserved = 0;
+		}
+
+		rc = -EINVAL;
+	} else {
+		for (i = 0; i < num_lmbs; i++) {
+			if (!lmbs[i].reserved)
+				continue;
+
+			pr_info("Memory at %llx was hot-removed\n",
+				lmbs[i].base_addr);
+
+			lmbs[i].reserved = 0;
+		}
+		rc = 0;
+	}
+
+	return rc;
+}
+
+static int dlpar_memory_remove_by_index(u32 drc_index, struct property *prop)
+{
+	struct of_drconf_cell *lmbs;
+	u32 num_lmbs, *p;
+	int lmb_found;
+	int i, rc;
+
+	pr_info("Attempting to hot-remove LMB, drc index %x\n", drc_index);
+
+	p = prop->value;
+	num_lmbs = *p++;
+	lmbs = (struct of_drconf_cell *)p;
+
+	lmb_found = 0;
+	for (i = 0; i < num_lmbs; i++) {
+		if (lmbs[i].drc_index == drc_index) {
+			lmb_found = 1;
+			rc = dlpar_remove_lmb(&lmbs[i]);
+			break;
+		}
+	}
+
+	if (!lmb_found)
+		rc = -EINVAL;
+
+	if (rc)
+		pr_info("Failed to hot-remove memory at %llx\n",
+			lmbs[i].base_addr);
+	else
+		pr_info("Memory at %llx was hot-removed\n", lmbs[i].base_addr);
+
+	return rc;
+}
+
 #else
 static inline int pseries_remove_memblock(unsigned long base,
 					  unsigned int memblock_size)
@@ -132,8 +365,261 @@ static inline int pseries_remove_mem_node(struct device_node *np)
 {
 	return 0;
 }
+static inline int dlpar_memory_remove(struct pseries_hp_errorlog *hp_elog)
+{
+	return -EOPNOTSUPP;
+}
+static int dlpar_remove_lmb(struct of_drconf_cell *lmb)
+{
+	return -EOPNOTSUPP;
+}
+static int dlpar_memory_remove_by_count(u32 lmbs_to_remove,
+					struct property *prop)
+{
+	return -EOPNOTSUPP;
+}
+static int dlpar_memory_remove_by_index(u32 drc_index, struct property *prop)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 
+static int dlpar_add_lmb(struct of_drconf_cell *lmb)
+{
+	struct memory_block *mem_block;
+	unsigned long block_sz;
+	int nid, rc;
+
+	if (lmb->flags & DRCONF_MEM_ASSIGNED)
+		return -EINVAL;
+
+	block_sz = memory_block_size_bytes();
+
+	rc = dlpar_acquire_drc(lmb->drc_index);
+	if (rc)
+		return rc;
+
+	/* Find the node id for this address */
+	nid = memory_add_physaddr_to_nid(lmb->base_addr);
+
+	/* Add the memory */
+	rc = add_memory(nid, lmb->base_addr, block_sz);
+	if (rc) {
+		dlpar_release_drc(lmb->drc_index);
+		return rc;
+	}
+
+	/* Register this block of memory */
+	rc = memblock_add(lmb->base_addr, block_sz);
+	if (rc) {
+		remove_memory(nid, lmb->base_addr, block_sz);
+		dlpar_release_drc(lmb->drc_index);
+		return rc;
+	}
+
+	mem_block = lmb_to_memblock(lmb);
+	if (!mem_block) {
+		remove_memory(nid, lmb->base_addr, block_sz);
+		dlpar_release_drc(lmb->drc_index);
+		return -EINVAL;
+	}
+
+	rc = device_online(&mem_block->dev);
+	put_device(&mem_block->dev);
+	if (rc) {
+		remove_memory(nid, lmb->base_addr, block_sz);
+		dlpar_release_drc(lmb->drc_index);
+		return rc;
+	}
+
+	lmb->flags |= DRCONF_MEM_ASSIGNED;
+	return 0;
+}
+
+static int dlpar_memory_add_by_count(u32 lmbs_to_add, struct property *prop)
+{
+	struct of_drconf_cell *lmbs;
+	u32 num_lmbs, *p;
+	int lmbs_available = 0;
+	int lmbs_added = 0;
+	int i, rc;
+
+	pr_info("Attempting to hot-add %d LMB(s)\n", lmbs_to_add);
+
+	if (lmbs_to_add == 0)
+		return -EINVAL;
+
+	p = prop->value;
+	num_lmbs = *p++;
+	lmbs = (struct of_drconf_cell *)p;
+
+	/* Validate that there are enough LMBs to satisfy the request */
+	for (i = 0; i < num_lmbs; i++) {
+		if (!(lmbs[i].flags & DRCONF_MEM_ASSIGNED))
+			lmbs_available++;
+	}
+
+	if (lmbs_available < lmbs_to_add)
+		return -EINVAL;
+
+	for (i = 0; i < num_lmbs && lmbs_to_add != lmbs_added; i++) {
+		rc = dlpar_add_lmb(&lmbs[i]);
+		if (rc)
+			continue;
+
+		lmbs_added++;
+
+		/* Mark this lmb so we can remove it later if all of the
+		 * requested LMBs cannot be added.
+		 */
+		lmbs[i].reserved = 1;
+	}
+
+	if (lmbs_added != lmbs_to_add) {
+		pr_err("Memory hot-add failed, removing any added LMBs\n");
+
+		for (i = 0; i < num_lmbs; i++) {
+			if (!lmbs[i].reserved)
+				continue;
+
+			rc = dlpar_remove_lmb(&lmbs[i]);
+			if (rc)
+				pr_err("Failed to remove LMB, drc index %x\n",
+				       be32_to_cpu(lmbs[i].drc_index));
+		}
+		rc = -EINVAL;
+	} else {
+		for (i = 0; i < num_lmbs; i++) {
+			if (!lmbs[i].reserved)
+				continue;
+
+			pr_info("Memory at %llx (drc index %x) was hot-added\n",
+				lmbs[i].base_addr, lmbs[i].drc_index);
+			lmbs[i].reserved = 0;
+		}
+	}
+
+	return rc;
+}
+
+static int dlpar_memory_add_by_index(u32 drc_index, struct property *prop)
+{
+	struct of_drconf_cell *lmbs;
+	u32 num_lmbs, *p;
+	int i, lmb_found;
+	int rc;
+
+	pr_info("Attempting to hot-add LMB, drc index %x\n", drc_index);
+
+	p = prop->value;
+	num_lmbs = *p++;
+	lmbs = (struct of_drconf_cell *)p;
+
+	lmb_found = 0;
+	for (i = 0; i < num_lmbs; i++) {
+		if (lmbs[i].drc_index == drc_index) {
+			lmb_found = 1;
+			rc = dlpar_add_lmb(&lmbs[i]);
+			break;
+		}
+	}
+
+	if (!lmb_found)
+		rc = -EINVAL;
+
+	if (rc)
+		pr_info("Failed to hot-add memory, drc index %x\n", drc_index);
+	else
+		pr_info("Memory at %llx (drc index %x) was hot-added\n",
+			lmbs[i].base_addr, drc_index);
+
+	return rc;
+}
+
+static void dlpar_update_drconf_property(struct device_node *dn,
+					 struct property *prop)
+{
+	struct of_drconf_cell *lmbs;
+	u32 num_lmbs, *p;
+	int i;
+
+	/* Convert the property back to BE */
+	p = prop->value;
+	num_lmbs = *p;
+	*p = cpu_to_be32(*p);
+	p++;
+
+	lmbs = (struct of_drconf_cell *)p;
+	for (i = 0; i < num_lmbs; i++) {
+		lmbs[i].base_addr = cpu_to_be64(lmbs[i].base_addr);
+		lmbs[i].drc_index = cpu_to_be32(lmbs[i].drc_index);
+		lmbs[i].flags = cpu_to_be32(lmbs[i].flags);
+	}
+
+	rtas_hp_event = true;
+	of_update_property(dn, prop);
+	rtas_hp_event = false;
+}
+
+int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
+{
+	struct device_node *dn;
+	struct property *prop;
+	u32 count, drc_index;
+	int rc;
+
+	count = hp_elog->_drc_u.drc_count;
+	drc_index = hp_elog->_drc_u.drc_index;
+
+	lock_device_hotplug();
+
+	dn = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (!dn) {
+		rc = -EINVAL;
+		goto dlpar_memory_out;
+	}
+
+	prop = dlpar_clone_drconf_property(dn);
+	if (!prop) {
+		rc = -EINVAL;
+		goto dlpar_memory_out;
+	}
+
+	switch (hp_elog->action) {
+	case PSERIES_HP_ELOG_ACTION_ADD:
+		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
+			rc = dlpar_memory_add_by_count(count, prop);
+		else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
+			rc = dlpar_memory_add_by_index(drc_index, prop);
+		else
+			rc = -EINVAL;
+		break;
+	case PSERIES_HP_ELOG_ACTION_REMOVE:
+		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
+			rc = dlpar_memory_remove_by_count(count, prop);
+		else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
+			rc = dlpar_memory_remove_by_index(drc_index, prop);
+		else
+			rc = -EINVAL;
+		break;
+	default:
+		pr_err("Invalid action (%d) specified\n", hp_elog->action);
+		rc = -EINVAL;
+		break;
+	}
+
+	if (rc)
+		dlpar_free_drconf_property(prop);
+	else
+		dlpar_update_drconf_property(dn, prop);
+
+dlpar_memory_out:
+	of_node_put(dn);
+	unlock_device_hotplug();
+	return rc;
+}
+
 static int pseries_add_mem_node(struct device_node *np)
 {
 	const char *type;
@@ -174,6 +660,9 @@ static int pseries_update_drconf_memory(struct of_reconfig_data *pr)
 	__be32 *p;
 	int i, rc = -EINVAL;
 
+	if (rtas_hp_event)
+		return 0;
+
 	memblock_size = pseries_memory_block_size();
 	if (!memblock_size)
 		return -EINVAL;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 7803a19..61d5a17 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -49,6 +49,7 @@
 #include <asm/mmzone.h>
 #include <asm/plpar_wrappers.h>
 
+#include "pseries.h"
 
 static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
 				      __be64 *startp, __be64 *endp)
@@ -1307,16 +1308,16 @@ void iommu_init_early_pSeries(void)
 			ppc_md.tce_free	 = tce_free_pSeriesLP;
 		}
 		ppc_md.tce_get   = tce_get_pSeriesLP;
-		ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
+		pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
+		pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
 		ppc_md.dma_set_mask = dma_set_mask_pSeriesLP;
 		ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP;
 	} else {
 		ppc_md.tce_build = tce_build_pSeries;
 		ppc_md.tce_free  = tce_free_pSeries;
 		ppc_md.tce_get   = tce_get_pseries;
-		ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeries;
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeries;
+		pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeries;
+		pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeries;
 	}
 
 
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 8f35d52..ceb18d3 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -320,28 +320,34 @@ static ssize_t migrate_store(struct class *class, struct class_attribute *attr,
 {
 	u64 streamid;
 	int rc;
-	int vasi_rc = 0;
 
 	rc = kstrtou64(buf, 0, &streamid);
 	if (rc)
 		return rc;
 
 	do {
-		rc = rtas_ibm_suspend_me(streamid, &vasi_rc);
-		if (!rc && vasi_rc == RTAS_NOT_SUSPENDABLE)
+		rc = rtas_ibm_suspend_me(streamid);
+		if (rc == -EAGAIN)
 			ssleep(1);
-	} while (!rc && vasi_rc == RTAS_NOT_SUSPENDABLE);
+	} while (rc == -EAGAIN);
 
 	if (rc)
 		return rc;
-	if (vasi_rc)
-		return vasi_rc;
 
 	post_mobility_fixup();
 	return count;
 }
 
+/*
+ * Used by drmgr to determine the kernel behavior of the migration interface.
+ *
+ * Version 1: Performs all PAPR requirements for migration including
+ *	firmware activation and device tree update.
+ */
+#define MIGRATION_API_VERSION	1
+
 static CLASS_ATTR(migration, S_IWUSR, NULL, migrate_store);
+static CLASS_ATTR_STRING(api_version, S_IRUGO, __stringify(MIGRATION_API_VERSION));
 
 static int __init mobility_sysfs_init(void)
 {
@@ -352,7 +358,13 @@ static int __init mobility_sysfs_init(void)
 		return -ENOMEM;
 
 	rc = sysfs_create_file(mobility_kobj, &class_attr_migration.attr);
+	if (rc)
+		pr_err("mobility: unable to create migration sysfs file (%d)\n", rc);
 
-	return rc;
+	rc = sysfs_create_file(mobility_kobj, &class_attr_api_version.attr.attr);
+	if (rc)
+		pr_err("mobility: unable to create api_version sysfs file (%d)\n", rc);
+
+	return 0;
 }
 machine_device_initcall(pseries, mobility_sysfs_init);
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 691a154..c8d24f9 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -195,6 +195,7 @@ static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total)
 static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 {
 	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
 	/* Found our PE and assume 8 at that point. */
@@ -204,10 +205,11 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 		return NULL;
 
 	/* Get the top level device in the PE */
-	edev = of_node_to_eeh_dev(dn);
+	edev = pdn_to_eeh_dev(PCI_DN(dn));
 	if (edev->pe)
 		edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
-	dn = eeh_dev_to_of_node(edev);
+	pdn = eeh_dev_to_pdn(edev);
+	dn = pdn ? pdn->node : NULL;
 	if (!dn)
 		return NULL;
 
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 054a0ed..9f818417 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -20,7 +20,6 @@
 #include <linux/kmsg_dump.h>
 #include <linux/pstore.h>
 #include <linux/ctype.h>
-#include <linux/zlib.h>
 #include <asm/uaccess.h>
 #include <asm/nvram.h>
 #include <asm/rtas.h>
@@ -30,129 +29,17 @@
 /* Max bytes to read/write in one go */
 #define NVRW_CNT 0x20
 
-/*
- * Set oops header version to distinguish between old and new format header.
- * lnx,oops-log partition max size is 4000, header version > 4000 will
- * help in identifying new header.
- */
-#define OOPS_HDR_VERSION 5000
-
 static unsigned int nvram_size;
 static int nvram_fetch, nvram_store;
 static char nvram_buf[NVRW_CNT];	/* assume this is in the first 4GB */
 static DEFINE_SPINLOCK(nvram_lock);
 
-struct err_log_info {
-	__be32 error_type;
-	__be32 seq_num;
-};
-
-struct nvram_os_partition {
-	const char *name;
-	int req_size;	/* desired size, in bytes */
-	int min_size;	/* minimum acceptable size (0 means req_size) */
-	long size;	/* size of data portion (excluding err_log_info) */
-	long index;	/* offset of data portion of partition */
-	bool os_partition; /* partition initialized by OS, not FW */
-};
-
-static struct nvram_os_partition rtas_log_partition = {
-	.name = "ibm,rtas-log",
-	.req_size = 2079,
-	.min_size = 1055,
-	.index = -1,
-	.os_partition = true
-};
-
-static struct nvram_os_partition oops_log_partition = {
-	.name = "lnx,oops-log",
-	.req_size = 4000,
-	.min_size = 2000,
-	.index = -1,
-	.os_partition = true
-};
-
-static const char *pseries_nvram_os_partitions[] = {
-	"ibm,rtas-log",
-	"lnx,oops-log",
-	NULL
-};
-
-struct oops_log_info {
-	__be16 version;
-	__be16 report_length;
-	__be64 timestamp;
-} __attribute__((packed));
-
-static void oops_to_nvram(struct kmsg_dumper *dumper,
-			  enum kmsg_dump_reason reason);
-
-static struct kmsg_dumper nvram_kmsg_dumper = {
-	.dump = oops_to_nvram
-};
-
 /* See clobbering_unread_rtas_event() */
 #define NVRAM_RTAS_READ_TIMEOUT 5		/* seconds */
-static unsigned long last_unread_rtas_event;	/* timestamp */
-
-/*
- * For capturing and compressing an oops or panic report...
-
- * big_oops_buf[] holds the uncompressed text we're capturing.
- *
- * oops_buf[] holds the compressed text, preceded by a oops header.
- * oops header has u16 holding the version of oops header (to differentiate
- * between old and new format header) followed by u16 holding the length of
- * the compressed* text (*Or uncompressed, if compression fails.) and u64
- * holding the timestamp. oops_buf[] gets written to NVRAM.
- *
- * oops_log_info points to the header. oops_data points to the compressed text.
- *
- * +- oops_buf
- * |                                   +- oops_data
- * v                                   v
- * +-----------+-----------+-----------+------------------------+
- * | version   | length    | timestamp | text                   |
- * | (2 bytes) | (2 bytes) | (8 bytes) | (oops_data_sz bytes)   |
- * +-----------+-----------+-----------+------------------------+
- * ^
- * +- oops_log_info
- *
- * We preallocate these buffers during init to avoid kmalloc during oops/panic.
- */
-static size_t big_oops_buf_sz;
-static char *big_oops_buf, *oops_buf;
-static char *oops_data;
-static size_t oops_data_sz;
-
-/* Compression parameters */
-#define COMPR_LEVEL 6
-#define WINDOW_BITS 12
-#define MEM_LEVEL 4
-static struct z_stream_s stream;
+static time64_t last_unread_rtas_event;		/* timestamp */
 
 #ifdef CONFIG_PSTORE
-static struct nvram_os_partition of_config_partition = {
-	.name = "of-config",
-	.index = -1,
-	.os_partition = false
-};
-
-static struct nvram_os_partition common_partition = {
-	.name = "common",
-	.index = -1,
-	.os_partition = false
-};
-
-static enum pstore_type_id nvram_type_ids[] = {
-	PSTORE_TYPE_DMESG,
-	PSTORE_TYPE_PPC_RTAS,
-	PSTORE_TYPE_PPC_OF,
-	PSTORE_TYPE_PPC_COMMON,
-	-1
-};
-static int read_type;
-static unsigned long last_rtas_event;
+time64_t last_rtas_event;
 #endif
 
 static ssize_t pSeries_nvram_read(char *buf, size_t count, loff_t *index)
@@ -246,132 +133,26 @@ static ssize_t pSeries_nvram_get_size(void)
 	return nvram_size ? nvram_size : -ENODEV;
 }
 
-
-/* nvram_write_os_partition, nvram_write_error_log
+/* nvram_write_error_log
  *
  * We need to buffer the error logs into nvram to ensure that we have
- * the failure information to decode.  If we have a severe error there
- * is no way to guarantee that the OS or the machine is in a state to
- * get back to user land and write the error to disk.  For example if
- * the SCSI device driver causes a Machine Check by writing to a bad
- * IO address, there is no way of guaranteeing that the device driver
- * is in any state that is would also be able to write the error data
- * captured to disk, thus we buffer it in NVRAM for analysis on the
- * next boot.
- *
- * In NVRAM the partition containing the error log buffer will looks like:
- * Header (in bytes):
- * +-----------+----------+--------+------------+------------------+
- * | signature | checksum | length | name       | data             |
- * |0          |1         |2      3|4         15|16        length-1|
- * +-----------+----------+--------+------------+------------------+
- *
- * The 'data' section would look like (in bytes):
- * +--------------+------------+-----------------------------------+
- * | event_logged | sequence # | error log                         |
- * |0            3|4          7|8                  error_log_size-1|
- * +--------------+------------+-----------------------------------+
- *
- * event_logged: 0 if event has not been logged to syslog, 1 if it has
- * sequence #: The unique sequence # for each event. (until it wraps)
- * error log: The error log from event_scan
+ * the failure information to decode.
  */
-static int nvram_write_os_partition(struct nvram_os_partition *part,
-				    char *buff, int length,
-				    unsigned int err_type,
-				    unsigned int error_log_cnt)
-{
-	int rc;
-	loff_t tmp_index;
-	struct err_log_info info;
-	
-	if (part->index == -1) {
-		return -ESPIPE;
-	}
-
-	if (length > part->size) {
-		length = part->size;
-	}
-
-	info.error_type = cpu_to_be32(err_type);
-	info.seq_num = cpu_to_be32(error_log_cnt);
-
-	tmp_index = part->index;
-
-	rc = ppc_md.nvram_write((char *)&info, sizeof(struct err_log_info), &tmp_index);
-	if (rc <= 0) {
-		pr_err("%s: Failed nvram_write (%d)\n", __func__, rc);
-		return rc;
-	}
-
-	rc = ppc_md.nvram_write(buff, length, &tmp_index);
-	if (rc <= 0) {
-		pr_err("%s: Failed nvram_write (%d)\n", __func__, rc);
-		return rc;
-	}
-	
-	return 0;
-}
-
 int nvram_write_error_log(char * buff, int length,
                           unsigned int err_type, unsigned int error_log_cnt)
 {
 	int rc = nvram_write_os_partition(&rtas_log_partition, buff, length,
 						err_type, error_log_cnt);
 	if (!rc) {
-		last_unread_rtas_event = get_seconds();
+		last_unread_rtas_event = ktime_get_real_seconds();
 #ifdef CONFIG_PSTORE
-		last_rtas_event = get_seconds();
+		last_rtas_event = ktime_get_real_seconds();
 #endif
 	}
 
 	return rc;
 }
 
-/* nvram_read_partition
- *
- * Reads nvram partition for at most 'length'
- */
-static int nvram_read_partition(struct nvram_os_partition *part, char *buff,
-				int length, unsigned int *err_type,
-				unsigned int *error_log_cnt)
-{
-	int rc;
-	loff_t tmp_index;
-	struct err_log_info info;
-	
-	if (part->index == -1)
-		return -1;
-
-	if (length > part->size)
-		length = part->size;
-
-	tmp_index = part->index;
-
-	if (part->os_partition) {
-		rc = ppc_md.nvram_read((char *)&info,
-					sizeof(struct err_log_info),
-					&tmp_index);
-		if (rc <= 0) {
-			pr_err("%s: Failed nvram_read (%d)\n", __func__, rc);
-			return rc;
-		}
-	}
-
-	rc = ppc_md.nvram_read(buff, length, &tmp_index);
-	if (rc <= 0) {
-		pr_err("%s: Failed nvram_read (%d)\n", __func__, rc);
-		return rc;
-	}
-
-	if (part->os_partition) {
-		*error_log_cnt = be32_to_cpu(info.seq_num);
-		*err_type = be32_to_cpu(info.error_type);
-	}
-
-	return 0;
-}
-
 /* nvram_read_error_log
  *
  * Reads nvram for error log for at most 'length'
@@ -407,67 +188,6 @@ int nvram_clear_error_log(void)
 	return 0;
 }
 
-/* pseries_nvram_init_os_partition
- *
- * This sets up a partition with an "OS" signature.
- *
- * The general strategy is the following:
- * 1.) If a partition with the indicated name already exists...
- *	- If it's large enough, use it.
- *	- Otherwise, recycle it and keep going.
- * 2.) Search for a free partition that is large enough.
- * 3.) If there's not a free partition large enough, recycle any obsolete
- * OS partitions and try again.
- * 4.) Will first try getting a chunk that will satisfy the requested size.
- * 5.) If a chunk of the requested size cannot be allocated, then try finding
- * a chunk that will satisfy the minum needed.
- *
- * Returns 0 on success, else -1.
- */
-static int __init pseries_nvram_init_os_partition(struct nvram_os_partition
-									*part)
-{
-	loff_t p;
-	int size;
-
-	/* Look for ours */
-	p = nvram_find_partition(part->name, NVRAM_SIG_OS, &size);
-
-	/* Found one but too small, remove it */
-	if (p && size < part->min_size) {
-		pr_info("nvram: Found too small %s partition,"
-					" removing it...\n", part->name);
-		nvram_remove_partition(part->name, NVRAM_SIG_OS, NULL);
-		p = 0;
-	}
-
-	/* Create one if we didn't find */
-	if (!p) {
-		p = nvram_create_partition(part->name, NVRAM_SIG_OS,
-					part->req_size, part->min_size);
-		if (p == -ENOSPC) {
-			pr_info("nvram: No room to create %s partition, "
-				"deleting any obsolete OS partitions...\n",
-				part->name);
-			nvram_remove_partition(NULL, NVRAM_SIG_OS,
-						pseries_nvram_os_partitions);
-			p = nvram_create_partition(part->name, NVRAM_SIG_OS,
-					part->req_size, part->min_size);
-		}
-	}
-
-	if (p <= 0) {
-		pr_err("nvram: Failed to find or create %s"
-		       " partition, err %d\n", part->name, (int)p);
-		return -1;
-	}
-
-	part->index = p;
-	part->size = nvram_get_partition_size(p) - sizeof(struct err_log_info);
-	
-	return 0;
-}
-
 /*
  * Are we using the ibm,rtas-log for oops/panic reports?  And if so,
  * would logging this oops/panic overwrite an RTAS event that rtas_errd
@@ -476,321 +196,14 @@ static int __init pseries_nvram_init_os_partition(struct nvram_os_partition
  * We assume that if rtas_errd hasn't read the RTAS event in
  * NVRAM_RTAS_READ_TIMEOUT seconds, it's probably not going to.
  */
-static int clobbering_unread_rtas_event(void)
+int clobbering_unread_rtas_event(void)
 {
 	return (oops_log_partition.index == rtas_log_partition.index
 		&& last_unread_rtas_event
-		&& get_seconds() - last_unread_rtas_event <=
+		&& ktime_get_real_seconds() - last_unread_rtas_event <=
 						NVRAM_RTAS_READ_TIMEOUT);
 }
 
-/* Derived from logfs_compress() */
-static int nvram_compress(const void *in, void *out, size_t inlen,
-							size_t outlen)
-{
-	int err, ret;
-
-	ret = -EIO;
-	err = zlib_deflateInit2(&stream, COMPR_LEVEL, Z_DEFLATED, WINDOW_BITS,
-						MEM_LEVEL, Z_DEFAULT_STRATEGY);
-	if (err != Z_OK)
-		goto error;
-
-	stream.next_in = in;
-	stream.avail_in = inlen;
-	stream.total_in = 0;
-	stream.next_out = out;
-	stream.avail_out = outlen;
-	stream.total_out = 0;
-
-	err = zlib_deflate(&stream, Z_FINISH);
-	if (err != Z_STREAM_END)
-		goto error;
-
-	err = zlib_deflateEnd(&stream);
-	if (err != Z_OK)
-		goto error;
-
-	if (stream.total_out >= stream.total_in)
-		goto error;
-
-	ret = stream.total_out;
-error:
-	return ret;
-}
-
-/* Compress the text from big_oops_buf into oops_buf. */
-static int zip_oops(size_t text_len)
-{
-	struct oops_log_info *oops_hdr = (struct oops_log_info *)oops_buf;
-	int zipped_len = nvram_compress(big_oops_buf, oops_data, text_len,
-								oops_data_sz);
-	if (zipped_len < 0) {
-		pr_err("nvram: compression failed; returned %d\n", zipped_len);
-		pr_err("nvram: logging uncompressed oops/panic report\n");
-		return -1;
-	}
-	oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION);
-	oops_hdr->report_length = cpu_to_be16(zipped_len);
-	oops_hdr->timestamp = cpu_to_be64(get_seconds());
-	return 0;
-}
-
-#ifdef CONFIG_PSTORE
-static int nvram_pstore_open(struct pstore_info *psi)
-{
-	/* Reset the iterator to start reading partitions again */
-	read_type = -1;
-	return 0;
-}
-
-/**
- * nvram_pstore_write - pstore write callback for nvram
- * @type:               Type of message logged
- * @reason:             reason behind dump (oops/panic)
- * @id:                 identifier to indicate the write performed
- * @part:               pstore writes data to registered buffer in parts,
- *                      part number will indicate the same.
- * @count:              Indicates oops count
- * @compressed:         Flag to indicate the log is compressed
- * @size:               number of bytes written to the registered buffer
- * @psi:                registered pstore_info structure
- *
- * Called by pstore_dump() when an oops or panic report is logged in the
- * printk buffer.
- * Returns 0 on successful write.
- */
-static int nvram_pstore_write(enum pstore_type_id type,
-				enum kmsg_dump_reason reason,
-				u64 *id, unsigned int part, int count,
-				bool compressed, size_t size,
-				struct pstore_info *psi)
-{
-	int rc;
-	unsigned int err_type = ERR_TYPE_KERNEL_PANIC;
-	struct oops_log_info *oops_hdr = (struct oops_log_info *) oops_buf;
-
-	/* part 1 has the recent messages from printk buffer */
-	if (part > 1 || type != PSTORE_TYPE_DMESG ||
-				clobbering_unread_rtas_event())
-		return -1;
-
-	oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION);
-	oops_hdr->report_length = cpu_to_be16(size);
-	oops_hdr->timestamp = cpu_to_be64(get_seconds());
-
-	if (compressed)
-		err_type = ERR_TYPE_KERNEL_PANIC_GZ;
-
-	rc = nvram_write_os_partition(&oops_log_partition, oops_buf,
-		(int) (sizeof(*oops_hdr) + size), err_type, count);
-
-	if (rc != 0)
-		return rc;
-
-	*id = part;
-	return 0;
-}
-
-/*
- * Reads the oops/panic report, rtas, of-config and common partition.
- * Returns the length of the data we read from each partition.
- * Returns 0 if we've been called before.
- */
-static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
-				int *count, struct timespec *time, char **buf,
-				bool *compressed, struct pstore_info *psi)
-{
-	struct oops_log_info *oops_hdr;
-	unsigned int err_type, id_no, size = 0;
-	struct nvram_os_partition *part = NULL;
-	char *buff = NULL;
-	int sig = 0;
-	loff_t p;
-
-	read_type++;
-
-	switch (nvram_type_ids[read_type]) {
-	case PSTORE_TYPE_DMESG:
-		part = &oops_log_partition;
-		*type = PSTORE_TYPE_DMESG;
-		break;
-	case PSTORE_TYPE_PPC_RTAS:
-		part = &rtas_log_partition;
-		*type = PSTORE_TYPE_PPC_RTAS;
-		time->tv_sec = last_rtas_event;
-		time->tv_nsec = 0;
-		break;
-	case PSTORE_TYPE_PPC_OF:
-		sig = NVRAM_SIG_OF;
-		part = &of_config_partition;
-		*type = PSTORE_TYPE_PPC_OF;
-		*id = PSTORE_TYPE_PPC_OF;
-		time->tv_sec = 0;
-		time->tv_nsec = 0;
-		break;
-	case PSTORE_TYPE_PPC_COMMON:
-		sig = NVRAM_SIG_SYS;
-		part = &common_partition;
-		*type = PSTORE_TYPE_PPC_COMMON;
-		*id = PSTORE_TYPE_PPC_COMMON;
-		time->tv_sec = 0;
-		time->tv_nsec = 0;
-		break;
-	default:
-		return 0;
-	}
-
-	if (!part->os_partition) {
-		p = nvram_find_partition(part->name, sig, &size);
-		if (p <= 0) {
-			pr_err("nvram: Failed to find partition %s, "
-				"err %d\n", part->name, (int)p);
-			return 0;
-		}
-		part->index = p;
-		part->size = size;
-	}
-
-	buff = kmalloc(part->size, GFP_KERNEL);
-
-	if (!buff)
-		return -ENOMEM;
-
-	if (nvram_read_partition(part, buff, part->size, &err_type, &id_no)) {
-		kfree(buff);
-		return 0;
-	}
-
-	*count = 0;
-
-	if (part->os_partition)
-		*id = id_no;
-
-	if (nvram_type_ids[read_type] == PSTORE_TYPE_DMESG) {
-		size_t length, hdr_size;
-
-		oops_hdr = (struct oops_log_info *)buff;
-		if (be16_to_cpu(oops_hdr->version) < OOPS_HDR_VERSION) {
-			/* Old format oops header had 2-byte record size */
-			hdr_size = sizeof(u16);
-			length = be16_to_cpu(oops_hdr->version);
-			time->tv_sec = 0;
-			time->tv_nsec = 0;
-		} else {
-			hdr_size = sizeof(*oops_hdr);
-			length = be16_to_cpu(oops_hdr->report_length);
-			time->tv_sec = be64_to_cpu(oops_hdr->timestamp);
-			time->tv_nsec = 0;
-		}
-		*buf = kmalloc(length, GFP_KERNEL);
-		if (*buf == NULL)
-			return -ENOMEM;
-		memcpy(*buf, buff + hdr_size, length);
-		kfree(buff);
-
-		if (err_type == ERR_TYPE_KERNEL_PANIC_GZ)
-			*compressed = true;
-		else
-			*compressed = false;
-		return length;
-	}
-
-	*buf = buff;
-	return part->size;
-}
-
-static struct pstore_info nvram_pstore_info = {
-	.owner = THIS_MODULE,
-	.name = "nvram",
-	.open = nvram_pstore_open,
-	.read = nvram_pstore_read,
-	.write = nvram_pstore_write,
-};
-
-static int nvram_pstore_init(void)
-{
-	int rc = 0;
-
-	nvram_pstore_info.buf = oops_data;
-	nvram_pstore_info.bufsize = oops_data_sz;
-
-	spin_lock_init(&nvram_pstore_info.buf_lock);
-
-	rc = pstore_register(&nvram_pstore_info);
-	if (rc != 0)
-		pr_err("nvram: pstore_register() failed, defaults to "
-				"kmsg_dump; returned %d\n", rc);
-
-	return rc;
-}
-#else
-static int nvram_pstore_init(void)
-{
-	return -1;
-}
-#endif
-
-static void __init nvram_init_oops_partition(int rtas_partition_exists)
-{
-	int rc;
-
-	rc = pseries_nvram_init_os_partition(&oops_log_partition);
-	if (rc != 0) {
-		if (!rtas_partition_exists)
-			return;
-		pr_notice("nvram: Using %s partition to log both"
-			" RTAS errors and oops/panic reports\n",
-			rtas_log_partition.name);
-		memcpy(&oops_log_partition, &rtas_log_partition,
-						sizeof(rtas_log_partition));
-	}
-	oops_buf = kmalloc(oops_log_partition.size, GFP_KERNEL);
-	if (!oops_buf) {
-		pr_err("nvram: No memory for %s partition\n",
-						oops_log_partition.name);
-		return;
-	}
-	oops_data = oops_buf + sizeof(struct oops_log_info);
-	oops_data_sz = oops_log_partition.size - sizeof(struct oops_log_info);
-
-	rc = nvram_pstore_init();
-
-	if (!rc)
-		return;
-
-	/*
-	 * Figure compression (preceded by elimination of each line's <n>
-	 * severity prefix) will reduce the oops/panic report to at most
-	 * 45% of its original size.
-	 */
-	big_oops_buf_sz = (oops_data_sz * 100) / 45;
-	big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL);
-	if (big_oops_buf) {
-		stream.workspace =  kmalloc(zlib_deflate_workspacesize(
-					WINDOW_BITS, MEM_LEVEL), GFP_KERNEL);
-		if (!stream.workspace) {
-			pr_err("nvram: No memory for compression workspace; "
-				"skipping compression of %s partition data\n",
-				oops_log_partition.name);
-			kfree(big_oops_buf);
-			big_oops_buf = NULL;
-		}
-	} else {
-		pr_err("No memory for uncompressed %s data; "
-			"skipping compression\n", oops_log_partition.name);
-		stream.workspace = NULL;
-	}
-
-	rc = kmsg_dump_register(&nvram_kmsg_dumper);
-	if (rc != 0) {
-		pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc);
-		kfree(oops_buf);
-		kfree(big_oops_buf);
-		kfree(stream.workspace);
-	}
-}
-
 static int __init pseries_nvram_init_log_partitions(void)
 {
 	int rc;
@@ -798,7 +211,7 @@ static int __init pseries_nvram_init_log_partitions(void)
 	/* Scan nvram for partitions */
 	nvram_scan_partitions();
 
-	rc = pseries_nvram_init_os_partition(&rtas_log_partition);
+	rc = nvram_init_os_partition(&rtas_log_partition);
 	nvram_init_oops_partition(rc == 0);
 	return 0;
 }
@@ -834,72 +247,3 @@ int __init pSeries_nvram_init(void)
 	return 0;
 }
 
-
-/*
- * This is our kmsg_dump callback, called after an oops or panic report
- * has been written to the printk buffer.  We want to capture as much
- * of the printk buffer as possible.  First, capture as much as we can
- * that we think will compress sufficiently to fit in the lnx,oops-log
- * partition.  If that's too much, go back and capture uncompressed text.
- */
-static void oops_to_nvram(struct kmsg_dumper *dumper,
-			  enum kmsg_dump_reason reason)
-{
-	struct oops_log_info *oops_hdr = (struct oops_log_info *)oops_buf;
-	static unsigned int oops_count = 0;
-	static bool panicking = false;
-	static DEFINE_SPINLOCK(lock);
-	unsigned long flags;
-	size_t text_len;
-	unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
-	int rc = -1;
-
-	switch (reason) {
-	case KMSG_DUMP_RESTART:
-	case KMSG_DUMP_HALT:
-	case KMSG_DUMP_POWEROFF:
-		/* These are almost always orderly shutdowns. */
-		return;
-	case KMSG_DUMP_OOPS:
-		break;
-	case KMSG_DUMP_PANIC:
-		panicking = true;
-		break;
-	case KMSG_DUMP_EMERG:
-		if (panicking)
-			/* Panic report already captured. */
-			return;
-		break;
-	default:
-		pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",
-		       __func__, (int) reason);
-		return;
-	}
-
-	if (clobbering_unread_rtas_event())
-		return;
-
-	if (!spin_trylock_irqsave(&lock, flags))
-		return;
-
-	if (big_oops_buf) {
-		kmsg_dump_get_buffer(dumper, false,
-				     big_oops_buf, big_oops_buf_sz, &text_len);
-		rc = zip_oops(text_len);
-	}
-	if (rc != 0) {
-		kmsg_dump_rewind(dumper);
-		kmsg_dump_get_buffer(dumper, false,
-				     oops_data, oops_data_sz, &text_len);
-		err_type = ERR_TYPE_KERNEL_PANIC;
-		oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION);
-		oops_hdr->report_length = cpu_to_be16(text_len);
-		oops_hdr->timestamp = cpu_to_be64(get_seconds());
-	}
-
-	(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
-		(int) (sizeof(*oops_hdr) + text_len), err_type,
-		++oops_count);
-
-	spin_unlock_irqrestore(&lock, flags);
-}
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 89e2381..5d4a3df 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -32,6 +32,8 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 
+#include "pseries.h"
+
 static struct pci_bus *
 find_bus_among_children(struct pci_bus *bus,
                         struct device_node *dn)
@@ -75,6 +77,7 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
 		return NULL;
 	rtas_setup_phb(phb);
 	pci_process_bridge_OF_ranges(phb, dn, 0);
+	phb->controller_ops = pseries_pci_controller_ops;
 
 	pci_devs_phb_init_dynamic(phb);
 
@@ -82,7 +85,7 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
 	eeh_dev_phb_init_dynamic(phb);
 
 	if (dn->child)
-		eeh_add_device_tree_early(dn);
+		eeh_add_device_tree_early(PCI_DN(dn));
 
 	pcibios_scan_phb(phb);
 	pcibios_finish_adding_to_bus(phb->bus);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 1796c54..8411c27 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -11,6 +11,7 @@
 #define _PSERIES_PSERIES_H
 
 #include <linux/interrupt.h>
+#include <asm/rtas.h>
 
 struct device_node;
 
@@ -60,11 +61,24 @@ extern struct device_node *dlpar_configure_connector(__be32,
 						struct device_node *);
 extern int dlpar_attach_node(struct device_node *);
 extern int dlpar_detach_node(struct device_node *);
+extern int dlpar_acquire_drc(u32 drc_index);
+extern int dlpar_release_drc(u32 drc_index);
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int dlpar_memory(struct pseries_hp_errorlog *hp_elog);
+#else
+static inline int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
+{
+	return -EOPNOTSUPP;
+}
+#endif
 
 /* PCI root bridge prepare function override for pseries */
 struct pci_host_bridge;
 int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
 
+extern struct pci_controller_ops pseries_pci_controller_ops;
+
 unsigned long pseries_memory_block_size(void);
 
 #endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index e445b67..df6a704 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -265,7 +265,7 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
 			update_dn_pci_info(np, pci->phb);
 
 			/* Create EEH device for the OF node */
-			eeh_dev_init(np, pci->phb);
+			eeh_dev_init(PCI_DN(np), pci->phb);
 		}
 		break;
 	default:
@@ -461,6 +461,47 @@ static long pseries_little_endian_exceptions(void)
 }
 #endif
 
+static void __init find_and_init_phbs(void)
+{
+	struct device_node *node;
+	struct pci_controller *phb;
+	struct device_node *root = of_find_node_by_path("/");
+
+	for_each_child_of_node(root, node) {
+		if (node->type == NULL || (strcmp(node->type, "pci") != 0 &&
+					   strcmp(node->type, "pciex") != 0))
+			continue;
+
+		phb = pcibios_alloc_controller(node);
+		if (!phb)
+			continue;
+		rtas_setup_phb(phb);
+		pci_process_bridge_OF_ranges(phb, node, 0);
+		isa_bridge_find_early(phb);
+		phb->controller_ops = pseries_pci_controller_ops;
+	}
+
+	of_node_put(root);
+	pci_devs_phb_init();
+
+	/*
+	 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
+	 * in chosen.
+	 */
+	if (of_chosen) {
+		const int *prop;
+
+		prop = of_get_property(of_chosen,
+				"linux,pci-probe-only", NULL);
+		if (prop) {
+			if (*prop)
+				pci_add_flags(PCI_PROBE_ONLY);
+			else
+				pci_clear_flags(PCI_PROBE_ONLY);
+		}
+	}
+}
+
 static void __init pSeries_setup_arch(void)
 {
 	set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
@@ -793,6 +834,10 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
 void pSeries_final_fixup(void) { }
 #endif
 
+struct pci_controller_ops pseries_pci_controller_ops = {
+	.probe_mode		= pSeries_pci_probe_mode,
+};
+
 define_machine(pseries) {
 	.name			= "pSeries",
 	.probe			= pSeries_probe,
@@ -801,7 +846,6 @@ define_machine(pseries) {
 	.show_cpuinfo		= pSeries_show_cpuinfo,
 	.log_error		= pSeries_log_error,
 	.pcibios_fixup		= pSeries_final_fixup,
-	.pci_probe_mode		= pSeries_pci_probe_mode,
 	.restart		= rtas_restart,
 	.halt			= rtas_halt,
 	.panic			= rtas_os_term,
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index a3555b1..6932ea8 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -197,16 +197,14 @@ static void pSeries_cause_ipi_mux(int cpu, unsigned long data)
 		xics_cause_ipi(cpu, data);
 }
 
-static __init int pSeries_smp_probe(void)
+static __init void pSeries_smp_probe(void)
 {
-	int ret = xics_smp_probe();
+	xics_smp_probe();
 
 	if (cpu_has_feature(CPU_FTR_DBELL)) {
 		xics_cause_ipi = smp_ops->cause_ipi;
 		smp_ops->cause_ipi = pSeries_cause_ipi_mux;
 	}
-
-	return ret;
 }
 
 static struct smp_ops_t pSeries_mpic_smp_ops = {