powerpc: Move cpu_setup_6xx.S and temp.c over to arch/powerpc

Also renamed temp.c to tau_6xx.c (for thermal assist unit) and updated
the Kconfig option description and help text for CONFIG_TAU.

Signed-off-by: Paul Mackerras <paulus@samba.org>

3 files changed, 0 insertions, 749 deletions

diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 3d50a26..d6a4863 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,6 @@ extra-y				+= vmlinux.lds
 obj-y				:= entry.o traps.o time.o misc.o \
 					setup.o \
 					ppc_htab.o
-obj-$(CONFIG_6xx)		+= cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
@@ -21,7 +20,6 @@ obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_RAPIDIO)		+= rio.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
 obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
-obj-$(CONFIG_TAU)		+= temp.o
 ifndef CONFIG_E200
 obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
 endif
@@ -34,12 +32,10 @@ endif
 # These are here while we do the architecture merge
 
 else
-obj-$(CONFIG_6xx)		+= cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
-obj-$(CONFIG_TAU)		+= temp.o
 ifndef CONFIG_E200
 obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
 endif
diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S
deleted file mode 100644
index 55ed771..0000000
--- a/arch/ppc/kernel/cpu_setup_6xx.S
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * This file contains low level CPU setup functions.
- *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__setup_cpu_603)
-	b	setup_common_caches
-_GLOBAL(__setup_cpu_604)
-	mflr	r4
-	bl	setup_common_caches
-	bl	setup_604_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_750)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_750cx)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	bl	setup_750cx
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_750fx)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	bl	setup_750fx
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_7400)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_7400_workarounds
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_7410)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_7410_workarounds
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	li	r3,0
-	mtspr	SPRN_L2CR2,r3
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_745x)
-	mflr	r4
-	bl	setup_common_caches
-	bl	setup_745x_specifics
-	mtlr	r4
-	blr
-
-/* Enable caches for 603's, 604, 750 & 7400 */
-setup_common_caches:
-	mfspr	r11,SPRN_HID0
-	andi.	r0,r11,HID0_DCE
-	ori	r11,r11,HID0_ICE|HID0_DCE
-	ori	r8,r11,HID0_ICFI
-	bne	1f			/* don't invalidate the D-cache */
-	ori	r8,r8,HID0_DCI		/* unless it wasn't enabled */
-1:	sync
-	mtspr	SPRN_HID0,r8		/* enable and invalidate caches */
-	sync
-	mtspr	SPRN_HID0,r11		/* enable caches */
-	sync
-	isync
-	blr
-
-/* 604, 604e, 604ev, ...
- * Enable superscalar execution & branch history table
- */
-setup_604_hid0:
-	mfspr	r11,SPRN_HID0
-	ori	r11,r11,HID0_SIED|HID0_BHTE
-	ori	r8,r11,HID0_BTCD
-	sync
-	mtspr	SPRN_HID0,r8	/* flush branch target address cache */
-	sync			/* on 604e/604r */
-	mtspr	SPRN_HID0,r11
-	sync
-	isync
-	blr
-
-/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
- * erratas we work around here.
- * Moto MPC710CE.pdf describes them, those are errata
- * #3, #4 and #5
- * Note that we assume the firmware didn't choose to
- * apply other workarounds (there are other ones documented
- * in the .pdf). It appear that Apple firmware only works
- * around #3 and with the same fix we use. We may want to
- * check if the CPU is using 60x bus mode in which case
- * the workaround for errata #4 is useless. Also, we may
- * want to explicitely clear HID0_NOPDST as this is not
- * needed once we have applied workaround #5 (though it's
- * not set by Apple's firmware at least).
- */
-setup_7400_workarounds:
-	mfpvr	r3
-	rlwinm	r3,r3,0,20,31
-	cmpwi	0,r3,0x0207
-	ble	1f
-	blr
-setup_7410_workarounds:
-	mfpvr	r3
-	rlwinm	r3,r3,0,20,31
-	cmpwi	0,r3,0x0100
-	bnelr
-1:
-	mfspr	r11,SPRN_MSSSR0
-	/* Errata #3: Set L1OPQ_SIZE to 0x10 */
-	rlwinm	r11,r11,0,9,6
-	oris	r11,r11,0x0100
-	/* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
-	oris	r11,r11,0x0002
-	/* Errata #5: Set DRLT_SIZE to 0x01 */
-	rlwinm	r11,r11,0,5,2
-	oris	r11,r11,0x0800
-	sync
-	mtspr	SPRN_MSSSR0,r11
-	sync
-	isync
-	blr
-
-/* 740/750/7400/7410
- * Enable Store Gathering (SGE), Address Brodcast (ABE),
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Clear Instruction cache throttling (ICTC)
- */
-setup_750_7400_hid0:
-	mfspr	r11,SPRN_HID0
-	ori	r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
-	oris	r11,r11,HID0_DPM@h
-BEGIN_FTR_SECTION
-	xori	r11,r11,HID0_BTIC
-END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-BEGIN_FTR_SECTION
-	xoris	r11,r11,HID0_DPM@h	/* disable dynamic power mgmt */
-END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
-	li	r3,HID0_SPD
-	andc	r11,r11,r3		/* clear SPD: enable speculative */
- 	li	r3,0
- 	mtspr	SPRN_ICTC,r3		/* Instruction Cache Throttling off */
-	isync
-	mtspr	SPRN_HID0,r11
-	sync
-	isync
-	blr
-
-/* 750cx specific
- * Looks like we have to disable NAP feature for some PLL settings...
- * (waiting for confirmation)
- */
-setup_750cx:
-	mfspr	r10, SPRN_HID1
-	rlwinm	r10,r10,4,28,31
-	cmpwi	cr0,r10,7
-	cmpwi	cr1,r10,9
-	cmpwi	cr2,r10,11
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
-	bnelr
-	lwz	r6,CPU_SPEC_FEATURES(r5)
-	li	r7,CPU_FTR_CAN_NAP
-	andc	r6,r6,r7
-	stw	r6,CPU_SPEC_FEATURES(r5)
-	blr
-
-/* 750fx specific
- */
-setup_750fx:
-	blr
-
-/* MPC 745x
- * Enable Store Gathering (SGE), Branch Folding (FOLD)
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Ensure our data cache instructions really operate.
- * Timebase has to be running or we wouldn't have made it here,
- * just ensure we don't disable it.
- * Clear Instruction cache throttling (ICTC)
- * Enable L2 HW prefetch
- */
-setup_745x_specifics:
-	/* We check for the presence of an L3 cache setup by
-	 * the firmware. If any, we disable NAP capability as
-	 * it's known to be bogus on rev 2.1 and earlier
-	 */
-	mfspr	r11,SPRN_L3CR
-	andis.	r11,r11,L3CR_L3E@h
-	beq	1f
-	lwz	r6,CPU_SPEC_FEATURES(r5)
-	andi.	r0,r6,CPU_FTR_L3_DISABLE_NAP
-	beq	1f
-	li	r7,CPU_FTR_CAN_NAP
-	andc	r6,r6,r7
-	stw	r6,CPU_SPEC_FEATURES(r5)
-1:
-	mfspr	r11,SPRN_HID0
-
-	/* All of the bits we have to set.....
-	 */
-	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
-	ori	r11,r11,HID0_LRSTK | HID0_BTIC
-	oris	r11,r11,HID0_DPM@h
-BEGIN_FTR_SECTION
-	xori	r11,r11,HID0_BTIC
-END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-BEGIN_FTR_SECTION
-	xoris	r11,r11,HID0_DPM@h	/* disable dynamic power mgmt */
-END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
-
-	/* All of the bits we have to clear....
-	 */
-	li	r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
-	andc	r11,r11,r3		/* clear SPD: enable speculative */
- 	li	r3,0
-
- 	mtspr	SPRN_ICTC,r3		/* Instruction Cache Throttling off */
-	isync
-	mtspr	SPRN_HID0,r11
-	sync
-	isync
-
-	/* Enable L2 HW prefetch, if L2 is enabled
-	 */
-	mfspr	r3,SPRN_L2CR
-	andis.	r3,r3,L2CR_L2E@h
-	beqlr
-	mfspr	r3,SPRN_MSSCR0
-	ori	r3,r3,3
-	sync
-	mtspr	SPRN_MSSCR0,r3
-	sync
-	isync
-	blr
-
-/*
- * Initialize the FPU registers. This is needed to work around an errata
- * in some 750 cpus where using a not yet initialized FPU register after
- * power on reset may hang the CPU
- */
-_GLOBAL(__init_fpu_registers)
-	mfmsr	r10
-	ori	r11,r10,MSR_FP
-	mtmsr	r11
-	isync
-	addis	r9,r3,empty_zero_page@ha
-	addi	r9,r9,empty_zero_page@l
-	REST_32FPRS(0,r9)
-	sync
-	mtmsr	r10
-	isync
-	blr
-
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0		0
-#define CS_HID1		4
-#define CS_HID2		8
-#define	CS_MSSCR0	12
-#define CS_MSSSR0	16
-#define CS_ICTRL	20
-#define CS_LDSTCR	24
-#define CS_LDSTDB	28
-#define CS_SIZE		32
-
-	.data
-	.balign	L1_CACHE_BYTES
-cpu_state_storage:
-	.space	CS_SIZE
-	.balign	L1_CACHE_BYTES,0
-	.text
-
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, MSSCR0, etc...
- */
-_GLOBAL(__save_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,cpu_state_storage@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* Save HID0 (common to all CONFIG_6xx cpus) */
-	mfspr	r3,SPRN_HID0
-	stw	r3,CS_HID0(r5)
-
-	/* Now deal with CPU type dependent registers */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmplwi	cr0,r3,0x8000	/* 7450 */
-	cmplwi	cr1,r3,0x000c	/* 7400 */
-	cmplwi	cr2,r3,0x800c	/* 7410 */
-	cmplwi	cr3,r3,0x8001	/* 7455 */
-	cmplwi	cr4,r3,0x8002	/* 7457 */
-	cmplwi	cr5,r3,0x8003	/* 7447A */
-	cmplwi	cr6,r3,0x7000	/* 750FX */
-	cmplwi	cr7,r3,0x8004	/* 7448 */
-	/* cr1 is 7400 || 7410 */
-	cror	4*cr1+eq,4*cr1+eq,4*cr2+eq
-	/* cr0 is 74xx */
-	cror	4*cr0+eq,4*cr0+eq,4*cr3+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr4+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr5+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr7+eq
-	bne	1f
-	/* Backup 74xx specific regs */
-	mfspr	r4,SPRN_MSSCR0
-	stw	r4,CS_MSSCR0(r5)
-	mfspr	r4,SPRN_MSSSR0
-	stw	r4,CS_MSSSR0(r5)
-	beq	cr1,1f
-	/* Backup 745x specific registers */
-	mfspr	r4,SPRN_HID1
-	stw	r4,CS_HID1(r5)
-	mfspr	r4,SPRN_ICTRL
-	stw	r4,CS_ICTRL(r5)
-	mfspr	r4,SPRN_LDSTCR
-	stw	r4,CS_LDSTCR(r5)
-	mfspr	r4,SPRN_LDSTDB
-	stw	r4,CS_LDSTDB(r5)
-1:
-	bne	cr6,1f
-	/* Backup 750FX specific registers */
-	mfspr	r4,SPRN_HID1
-	stw	r4,CS_HID1(r5)
-	/* If rev 2.x, backup HID2 */
-	mfspr	r3,SPRN_PVR
-	andi.	r3,r3,0xff00
-	cmpwi	cr0,r3,0x0200
-	bne	1f
-	mfspr	r4,SPRN_HID2
-	stw	r4,CS_HID2(r5)
-1:
-	mtcr	r7
-	blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,(cpu_state_storage-KERNELBASE)@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* Restore HID0 */
-	lwz	r3,CS_HID0(r5)
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	sync
-	isync
-
-	/* Now deal with CPU type dependent registers */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmplwi	cr0,r3,0x8000	/* 7450 */
-	cmplwi	cr1,r3,0x000c	/* 7400 */
-	cmplwi	cr2,r3,0x800c	/* 7410 */
-	cmplwi	cr3,r3,0x8001	/* 7455 */
-	cmplwi	cr4,r3,0x8002	/* 7457 */
-	cmplwi	cr5,r3,0x8003	/* 7447A */
-	cmplwi	cr6,r3,0x7000	/* 750FX */
-	cmplwi	cr7,r3,0x8004	/* 7448 */
-	/* cr1 is 7400 || 7410 */
-	cror	4*cr1+eq,4*cr1+eq,4*cr2+eq
-	/* cr0 is 74xx */
-	cror	4*cr0+eq,4*cr0+eq,4*cr3+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr4+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr5+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr7+eq
-	bne	2f
-	/* Restore 74xx specific regs */
-	lwz	r4,CS_MSSCR0(r5)
-	sync
-	mtspr	SPRN_MSSCR0,r4
-	sync
-	isync
-	lwz	r4,CS_MSSSR0(r5)
-	sync
-	mtspr	SPRN_MSSSR0,r4
-	sync
-	isync
-	bne	cr2,1f
-	/* Clear 7410 L2CR2 */
-	li	r4,0
-	mtspr	SPRN_L2CR2,r4
-1:	beq	cr1,2f
-	/* Restore 745x specific registers */
-	lwz	r4,CS_HID1(r5)
-	sync
-	mtspr	SPRN_HID1,r4
-	isync
-	sync
-	lwz	r4,CS_ICTRL(r5)
-	sync
-	mtspr	SPRN_ICTRL,r4
-	isync
-	sync
-	lwz	r4,CS_LDSTCR(r5)
-	sync
-	mtspr	SPRN_LDSTCR,r4
-	isync
-	sync
-	lwz	r4,CS_LDSTDB(r5)
-	sync
-	mtspr	SPRN_LDSTDB,r4
-	isync
-	sync
-2:	bne	cr6,1f
-	/* Restore 750FX specific registers
-	 * that is restore HID2 on rev 2.x and PLL config & switch
-	 * to PLL 0 on all
-	 */
-	/* If rev 2.x, restore HID2 with low voltage bit cleared */
-	mfspr	r3,SPRN_PVR
-	andi.	r3,r3,0xff00
-	cmpwi	cr0,r3,0x0200
-	bne	4f
-	lwz	r4,CS_HID2(r5)
-	rlwinm	r4,r4,0,19,17
-	mtspr	SPRN_HID2,r4
-	sync
-4:
-	lwz	r4,CS_HID1(r5)
-	rlwinm  r5,r4,0,16,14
-	mtspr	SPRN_HID1,r5
-		/* Wait for PLL to stabilize */
-	mftbl	r5
-3:	mftbl	r6
-	sub	r6,r6,r5
-	cmplwi	cr0,r6,10000
-	ble	3b
-	/* Setup final PLL */
-	mtspr	SPRN_HID1,r4
-1:
-	mtcr	r7
-	blr
-
diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c
deleted file mode 100644
index 26bd8ea..0000000
--- a/arch/ppc/kernel/temp.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * temp.c	Thermal management for cpu's with Thermal Assist Units
- *
- * Written by Troy Benjegerdes <hozer@drgw.net>
- *
- * TODO:
- * dynamic power management to limit peak CPU temp (using ICTC)
- * calibration???
- *
- * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery
- * life in portables, and add a 'performance/watt' metric somewhere in /proc
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-
-static struct tau_temp
-{
-	int interrupts;
-	unsigned char low;
-	unsigned char high;
-	unsigned char grew;
-} tau[NR_CPUS];
-
-struct timer_list tau_timer;
-
-#undef DEBUG
-
-/* TODO: put these in a /proc interface, with some sanity checks, and maybe
- * dynamic adjustment to minimize # of interrupts */
-/* configurable values for step size and how much to expand the window when
- * we get an interrupt. These are based on the limit that was out of range */
-#define step_size		2	/* step size when temp goes out of range */
-#define window_expand		1	/* expand the window by this much */
-/* configurable values for shrinking the window */
-#define shrink_timer	2*HZ	/* period between shrinking the window */
-#define min_window	2	/* minimum window size, degrees C */
-
-void set_thresholds(unsigned long cpu)
-{
-#ifdef CONFIG_TAU_INT
-	/*
-	 * setup THRM1,
-	 * threshold, valid bit, enable interrupts, interrupt when below threshold
-	 */
-	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
-
-	/* setup THRM2,
-	 * threshold, valid bit, enable interrupts, interrupt when above threshhold
-	 */
-	mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
-#else
-	/* same thing but don't enable interrupts */
-	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID);
-	mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V);
-#endif
-}
-
-void TAUupdate(int cpu)
-{
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
-
-	/* if both thresholds are crossed, the step_sizes cancel out
-	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
-		}
-	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
-		}
-	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
-}
-
-#ifdef CONFIG_TAU_INT
-/*
- * TAU interrupts - called when we have a thermal assist unit interrupt
- * with interrupts disabled
- */
-
-void TAUException(struct pt_regs * regs)
-{
-	int cpu = smp_processor_id();
-
-	irq_enter();
-	tau[cpu].interrupts++;
-
-	TAUupdate(cpu);
-
-	irq_exit();
-}
-#endif /* CONFIG_TAU_INT */
-
-static void tau_timeout(void * info)
-{
-	int cpu;
-	unsigned long flags;
-	int size;
-	int shrink;
-
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
-	cpu = smp_processor_id();
-
-#ifndef CONFIG_TAU_INT
-	TAUupdate(cpu);
-#endif
-
-	size = tau[cpu].high - tau[cpu].low;
-	if (size > min_window && ! tau[cpu].grew) {
-		/* do an exponential shrink of half the amount currently over size */
-		shrink = (2 + size - min_window) / 4;
-		if (shrink) {
-			tau[cpu].low += shrink;
-			tau[cpu].high -= shrink;
-		} else { /* size must have been min_window + 1 */
-			tau[cpu].low += 1;
-#if 1 /* debug */
-			if ((tau[cpu].high - tau[cpu].low) != min_window){
-				printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__);
-			}
-#endif
-		}
-	}
-
-	tau[cpu].grew = 0;
-
-	set_thresholds(cpu);
-
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
-	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
-
-	local_irq_restore(flags);
-}
-
-static void tau_timeout_smp(unsigned long unused)
-{
-
-	/* schedule ourselves to be run again */
-	mod_timer(&tau_timer, jiffies + shrink_timer) ;
-	on_each_cpu(tau_timeout, NULL, 1, 0);
-}
-
-/*
- * setup the TAU
- *
- * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound.
- * Start off at zero
- */
-
-int tau_initialized = 0;
-
-void __init TAU_init_smp(void * info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	/* set these to a reasonable value and let the timer shrink the
-	 * window */
-	tau[cpu].low = 5;
-	tau[cpu].high = 120;
-
-	set_thresholds(cpu);
-}
-
-int __init TAU_init(void)
-{
-	/* We assume in SMP that if one CPU has TAU support, they
-	 * all have it --BenH
-	 */
-	if (!cpu_has_feature(CPU_FTR_TAU)) {
-		printk("Thermal assist unit not available\n");
-		tau_initialized = 0;
-		return 1;
-	}
-
-
-	/* first, set up the window shrinking timer */
-	init_timer(&tau_timer);
-	tau_timer.function = tau_timeout_smp;
-	tau_timer.expires = jiffies + shrink_timer;
-	add_timer(&tau_timer);
-
-	on_each_cpu(TAU_init_smp, NULL, 1, 0);
-
-	printk("Thermal assist unit ");
-#ifdef CONFIG_TAU_INT
-	printk("using interrupts, ");
-#else
-	printk("using timers, ");
-#endif
-	printk("shrink_timer: %d jiffies\n", shrink_timer);
-	tau_initialized = 1;
-
-	return 0;
-}
-
-__initcall(TAU_init);
-
-/*
- * return current temp
- */
-
-u32 cpu_temp_both(unsigned long cpu)
-{
-	return ((tau[cpu].high << 16) | tau[cpu].low);
-}
-
-int cpu_temp(unsigned long cpu)
-{
-	return ((tau[cpu].high + tau[cpu].low) / 2);
-}
-
-int tau_interrupts(unsigned long cpu)
-{
-	return (tau[cpu].interrupts);
-}