spelling fixes: arch/sh/

Spelling fixes in arch/sh/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

6 files changed, 10 insertions, 10 deletions

diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
index 50d38be..a37643d 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/landisk/gio.c
@@ -69,7 +69,7 @@ static int gio_ioctl(struct inode *inode, struct file *filp,
 	}
 
 	switch (cmd) {
-	case GIODRV_IOCSGIOSETADDR:	/* addres set */
+	case GIODRV_IOCSGIOSETADDR:	/* address set */
 		addr = data;
 		break;
 
diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c
index 1659fdd..edb3dd9 100644
--- a/arch/sh/boards/snapgear/rtc.c
+++ b/arch/sh/boards/snapgear/rtc.c
@@ -108,7 +108,7 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val)
 static void ds1302_reset(void)
 {
 	unsigned long	flags;
-	/* Hardware dependant reset/init */
+	/* Hardware dependent reset/init */
 	local_irq_save(flags);
 	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
 	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
index 83419bf..b704e20 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/superh/microdev/io.c
@@ -198,12 +198,12 @@ void microdev_outb(unsigned char b, unsigned long port)
 	/*
 	 *	There is a board feature with the current SH4-202 MicroDev in
 	 *	that the 2 byte enables (nBE0 and nBE1) are tied together (and
-	 *	to the Chip Select Line (Ethernet_CS)). Due to this conectivity,
+	 *	to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
 	 *	it is not possible to safely perform 8-bit writes to the
 	 *	Ethernet registers, as 16-bits will be consumed from the Data
 	 *	lines (corrupting the other byte).  Hence, this function is
-	 *	written to impliment 16-bit read/modify/write for all byte-wide
-	 *	acceses.
+	 *	written to implement 16-bit read/modify/write for all byte-wide
+	 *	accesses.
 	 *
 	 *	Note: there is no problem with byte READS (even or odd).
 	 *
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
index 8c64baa..cc1cb04 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/superh/microdev/irq.c
@@ -100,7 +100,7 @@ static void disable_microdev_irq(unsigned int irq)
 
 	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
 
-	/* disable interupts on the FPGA INTC register */
+	/* disable interrupts on the FPGA INTC register */
 	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
 }
 
@@ -125,7 +125,7 @@ static void enable_microdev_irq(unsigned int irq)
 	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
 	ctrl_outl(priorities, priorityReg);
 
-	/* enable interupts on the FPGA INTC register */
+	/* enable interrupts on the FPGA INTC register */
 	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
 }
 
@@ -152,7 +152,7 @@ extern void __init init_microdev_irq(void)
 {
 	int i;
 
-		/* disable interupts on the FPGA INTC register */
+		/* disable interrupts on the FPGA INTC register */
 	ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
 
 	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 031c814..6396cea 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -349,7 +349,7 @@ static int __init smsc_superio_setup(void)
 	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
 	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
 
-		/* Exit the configuraton state */
+		/* Exit the configuration state */
 	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
 
 	return 0;
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index 1c94137..bee4612 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -6,7 +6,7 @@
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
  *
- * Setup code for an unknown machine (internal peripherials only)
+ * Setup code for an unknown machine (internal peripherals only)
  *
  * This is the simplest of all boards, and serves only as a quick and dirty
  * method to start debugging a new board during bring-up until proper board