diff options
author | Paul Mundt <lethal@linux-sh.org> | 2011-01-13 09:38:28 (GMT) |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2011-01-13 09:38:28 (GMT) |
commit | 8b6f08eaef16dfcfebc32fa9a017bf70336ad9ec (patch) | |
tree | 9f29f39de67b85baad5eca7d7165549a166c4367 /arch/sh/boards | |
parent | 4ae26f46c98f58ef19ad34f475617b40740d2faa (diff) | |
parent | 8a453cac94803910305f7e95cbd157b6bbd88811 (diff) | |
download | linux-8b6f08eaef16dfcfebc32fa9a017bf70336ad9ec.tar.xz |
Merge branch 'sh/alphaproject' into sh-latest
Diffstat (limited to 'arch/sh/boards')
-rw-r--r-- | arch/sh/boards/Kconfig | 18 | ||||
-rw-r--r-- | arch/sh/boards/Makefile | 2 | ||||
-rw-r--r-- | arch/sh/boards/board-apsh4a3a.c | 175 | ||||
-rw-r--r-- | arch/sh/boards/board-apsh4ad0a.c | 125 |
4 files changed, 320 insertions, 0 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 2018c7e..d893411 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -3,6 +3,9 @@ menu "Board support" config SOLUTION_ENGINE bool +config SH_ALPHA_BOARD + bool + config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE @@ -320,6 +323,21 @@ config SH_SH2007 Compact Flash socket, two serial ports and PC-104 bus. More information at <http://sh2000.sh-linux.org>. +config SH_APSH4A3A + bool "AP-SH4A-3A" + select SH_ALPHA_BOARD + depends on CPU_SUBTYPE_SH7785 + help + Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. + +config SH_APSH4AD0A + bool "AP-SH4AD-0A" + select SH_ALPHA_BOARD + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7786 + help + Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. + endmenu source "arch/sh/boards/mach-r2d/Kconfig" diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index be7d11d..975a0f6 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -13,3 +13,5 @@ obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_POLARIS) += board-polaris.o obj-$(CONFIG_SH_TITAN) += board-titan.o obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o +obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o +obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c new file mode 100644 index 0000000..8e2a270 --- /dev/null +++ b/arch/sh/boards/board-apsh4a3a.c @@ -0,0 +1,175 @@ +/* + * ALPHAPROJECT AP-SH4A-3A Support. + * + * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd. + * Copyright (C) 2008 Yoshihiro Shimoda + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mtd/physmap.h> +#include <linux/smsc911x.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <asm/machvec.h> +#include <asm/sizes.h> +#include <asm/clock.h> + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0xA4000000, + .end = 0xA4000000 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x200), + .end = evt2irq(0x200), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *apsh4a3a_devices[] __initdata = { + &nor_flash_device, + &smsc911x_device, +}; + +static int __init apsh4a3a_devices_setup(void) +{ + return platform_add_devices(apsh4a3a_devices, + ARRAY_SIZE(apsh4a3a_devices)); +} +device_initcall(apsh4a3a_devices_setup); + +static int apsh4a3a_clk_init(void) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "extal"); + if (!clk || IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333000); + clk_put(clk); + + return ret; +} + +/* Initialize the board */ +static void __init apsh4a3a_setup(char **cmdline_p) +{ + printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n"); +} + +static void __init apsh4a3a_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); +} + +/* Return the board specific boot mode pin configuration */ +static int apsh4a3a_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of SW1 and SW2. + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value &= ~MODE_PIN0; /* Clock Mode 16 */ + value &= ~MODE_PIN1; + value &= ~MODE_PIN2; + value &= ~MODE_PIN3; + value |= MODE_PIN4; + value &= ~MODE_PIN5; /* 16-bit Area0 bus width */ + value |= MODE_PIN6; /* Area 0 SRAM interface */ + value |= MODE_PIN7; + value |= MODE_PIN8; /* Little Endian */ + value |= MODE_PIN9; /* Master Mode */ + value |= MODE_PIN10; /* Crystal resonator */ + value |= MODE_PIN11; /* Display Unit */ + value |= MODE_PIN12; + value &= ~MODE_PIN13; /* 29-bit address mode */ + value |= MODE_PIN14; /* No PLL step-up */ + + return value; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_apsh4a3a __initmv = { + .mv_name = "AP-SH4A-3A", + .mv_setup = apsh4a3a_setup, + .mv_clk_init = apsh4a3a_clk_init, + .mv_init_irq = apsh4a3a_init_irq, + .mv_mode_pins = apsh4a3a_mode_pins, +}; diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c new file mode 100644 index 0000000..e2bd218 --- /dev/null +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -0,0 +1,125 @@ +/* + * ALPHAPROJECT AP-SH4AD-0A Support. + * + * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd. + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/smsc911x.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <asm/machvec.h> +#include <asm/sizes.h> + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0xA4000000, + .end = 0xA4000000 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x200), + .end = evt2irq(0x200), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *apsh4ad0a_devices[] __initdata = { + &smsc911x_device, +}; + +static int __init apsh4ad0a_devices_setup(void) +{ + return platform_add_devices(apsh4ad0a_devices, + ARRAY_SIZE(apsh4ad0a_devices)); +} +device_initcall(apsh4ad0a_devices_setup); + +static int apsh4ad0a_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of SW1 and SW2. + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value |= MODE_PIN0; /* Clock Mode 3 */ + value |= MODE_PIN1; + value &= ~MODE_PIN2; + value &= ~MODE_PIN3; + value &= ~MODE_PIN4; /* 16-bit Area0 bus width */ + value |= MODE_PIN5; + value |= MODE_PIN6; + value |= MODE_PIN7; /* Normal mode */ + value |= MODE_PIN8; /* Little Endian */ + value |= MODE_PIN9; /* Crystal resonator */ + value &= ~MODE_PIN10; /* 29-bit address mode */ + value &= ~MODE_PIN11; /* PCI-E Root port */ + value &= ~MODE_PIN12; /* 4 lane + 1 lane */ + value |= MODE_PIN13; /* AUD Enable */ + value &= ~MODE_PIN14; /* Normal Operation */ + + return value; +} + +static int apsh4ad0a_clk_init(void) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "extal"); + if (!clk || IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333000); + clk_put(clk); + + return ret; +} + +/* Initialize the board */ +static void __init apsh4ad0a_setup(char **cmdline_p) +{ + pr_info("Alpha Project AP-SH4AD-0A support:\n"); +} + +static void __init apsh4ad0a_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_apsh4ad0a __initmv = { + .mv_name = "AP-SH4AD-0A", + .mv_setup = apsh4ad0a_setup, + .mv_mode_pins = apsh4ad0a_mode_pins, + .mv_clk_init = apsh4ad0a_clk_init, + .mv_init_irq = apsh4ad0a_init_irq, +}; |