sh: More I/O routine overhauling.

This tidies up a lot of the PIO/MMIO split. No in-tree platforms were
making use of the MMIO overloading through the machvec (nor have any of
them been in some time), so we just kill all of that off. The ISA I/O
routine wrapping remains unaffected, which remains the only special
casing outside of the iomap API that boards need to think about.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 96 insertions, 175 deletions

diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index d9e794e..436c285 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -1,27 +1,26 @@
 #ifndef __ASM_SH_IO_H
 #define __ASM_SH_IO_H
-
 /*
  * Convention:
- *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    read{b,w,l,q}/write{b,w,l,q} are for PCI,
  *    while in{b,w,l}/out{b,w,l} are for ISA
- * These may (will) be platform specific function.
+ *
  * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
  * and 'string' versions: ins{b,w,l}/outs{b,w,l}
- * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
- * do not have a memory barrier after them.
  *
- * In addition, we have
- *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
- *   which are processor specific.
- */
-
-/*
- * We follow the Alpha convention here:
- *  __inb expands to an inline function call (which calls via the mv)
- *  _inb  is a real function call (note ___raw fns are _ version of __raw)
- *  inb   by default expands to _inb, but the machine specific code may
- *        define it to __inb if it chooses.
+ * While read{b,w,l,q} and write{b,w,l,q} contain memory barriers
+ * automatically, there are also __raw versions, which do not.
+ *
+ * Historically, we have also had ctrl_in{b,w,l,q}/ctrl_out{b,w,l,q} for
+ * SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice
+ * these have the same semantics as the __raw variants, and as such, all
+ * new code should be using the __raw versions.
+ *
+ * All ISA I/O routines are wrapped through the machine vector. If a
+ * board does not provide overrides, a generic set that are copied in
+ * from the default machine vector are used instead. These are largely
+ * for old compat code for I/O offseting to SuperIOs, all of which are
+ * better handled through the machvec ioport mapping routines these days.
  */
 #include <asm/cache.h>
 #include <asm/system.h>
@@ -31,7 +30,6 @@
 #include <asm-generic/iomap.h>
 
 #ifdef __KERNEL__
-
 /*
  * Depending on which platform we are running on, we need different
  * I/O functions.
@@ -40,90 +38,64 @@
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
-#define maybebadio(port) \
-  printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
-	 __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
+#define inb(p)			sh_mv.mv_inb((p))
+#define inw(p)			sh_mv.mv_inw((p))
+#define inl(p)			sh_mv.mv_inl((p))
+#define outb(x,p)		sh_mv.mv_outb((x),(p))
+#define outw(x,p)		sh_mv.mv_outw((x),(p))
+#define outl(x,p)		sh_mv.mv_outl((x),(p))
+
+#define inb_p(p)		sh_mv.mv_inb_p((p))
+#define inw_p(p)		sh_mv.mv_inw_p((p))
+#define inl_p(p)		sh_mv.mv_inl_p((p))
+#define outb_p(x,p)		sh_mv.mv_outb_p((x),(p))
+#define outw_p(x,p)		sh_mv.mv_outw_p((x),(p))
+#define outl_p(x,p)		sh_mv.mv_outl_p((x),(p))
+
+#define insb(p,b,c)		sh_mv.mv_insb((p), (b), (c))
+#define insw(p,b,c)		sh_mv.mv_insw((p), (b), (c))
+#define insl(p,b,c)		sh_mv.mv_insl((p), (b), (c))
+#define outsb(p,b,c)		sh_mv.mv_outsb((p), (b), (c))
+#define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
+#define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
+#define __raw_writeq(v,a)	(__chk_io_ptr(a), *(volatile u64 __force *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile u8  __force *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile u16 __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile u32 __force *)(a))
+#define __raw_readq(a)		(__chk_io_ptr(a), *(volatile u64 __force *)(a))
+
+#define readb(a)		({ u8  r_ = __raw_readb(a); mb(); r_; })
+#define readw(a)		({ u16 r_ = __raw_readw(a); mb(); r_; })
+#define readl(a)		({ u32 r_ = __raw_readl(a); mb(); r_; })
+#define readq(a)		({ u64 r_ = __raw_readq(a); mb(); r_; })
+
+#define writeb(v,a)		({ __raw_writeb((v),(a)); mb(); })
+#define writew(v,a)		({ __raw_writew((v),(a)); mb(); })
+#define writel(v,a)		({ __raw_writel((v),(a)); mb(); })
+#define writeq(v,a)		({ __raw_writeq((v),(a)); mb(); })
 
-/*
- * Since boards are able to define their own set of I/O routines through
- * their respective machine vector, we always wrap through the mv.
- *
- * Also, in the event that a board hasn't provided its own definition for
- * a given routine, it will be wrapped to generic code at run-time.
- */
-
-#define __inb(p)	sh_mv.mv_inb((p))
-#define __inw(p)	sh_mv.mv_inw((p))
-#define __inl(p)	sh_mv.mv_inl((p))
-#define __outb(x,p)	sh_mv.mv_outb((x),(p))
-#define __outw(x,p)	sh_mv.mv_outw((x),(p))
-#define __outl(x,p)	sh_mv.mv_outl((x),(p))
-
-#define __inb_p(p)	sh_mv.mv_inb_p((p))
-#define __inw_p(p)	sh_mv.mv_inw_p((p))
-#define __inl_p(p)	sh_mv.mv_inl_p((p))
-#define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
-#define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
-#define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
-
-#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
-#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
-#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
-#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
-#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
-#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
-
-#define __readb(a)	sh_mv.mv_readb((a))
-#define __readw(a)	sh_mv.mv_readw((a))
-#define __readl(a)	sh_mv.mv_readl((a))
-#define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
-#define __writew(v,a)	sh_mv.mv_writew((v),(a))
-#define __writel(v,a)	sh_mv.mv_writel((v),(a))
-
-#define inb		__inb
-#define inw		__inw
-#define inl		__inl
-#define outb		__outb
-#define outw		__outw
-#define outl		__outl
-
-#define inb_p		__inb_p
-#define inw_p		__inw_p
-#define inl_p		__inl_p
-#define outb_p		__outb_p
-#define outw_p		__outw_p
-#define outl_p		__outl_p
-
-#define insb		__insb
-#define insw		__insw
-#define insl		__insl
-#define outsb		__outsb
-#define outsw		__outsw
-#define outsl		__outsl
-
-#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
-#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
-#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
-
-#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
-#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
-#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
-
-void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+/* SuperH on-chip I/O functions */
+#define ctrl_inb		__raw_readb
+#define ctrl_inw		__raw_readw
+#define ctrl_inl		__raw_readl
+#define ctrl_inq		__raw_readq
 
-/*
- * The platform header files may define some of these macros to use
- * the inlined versions where appropriate.  These macros may also be
- * redefined by userlevel programs.
- */
-#define readb(a)	({ unsigned int r_ = __readb(a); mb(); r_; })
-#define readw(a)	({ unsigned int r_ = __readw(a); mb(); r_; })
-#define readl(a)	({ unsigned int r_ = __readl(a); mb(); r_; })
+#define ctrl_outb		__raw_writeb
+#define ctrl_outw		__raw_writew
+#define ctrl_outl		__raw_writel
+#define ctrl_outq		__raw_writeq
 
-#define writeb(v,a)	({ __writeb((v),(a)); mb(); })
-#define writew(v,a)	({ __writew((v),(a)); mb(); })
-#define writel(v,a)	({ __writel((v),(a)); mb(); })
+static inline void ctrl_delay(void)
+{
+#ifdef P2SEG
+	__raw_readw(P2SEG);
+#endif
+}
 
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
 									\
@@ -151,18 +123,23 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
 
 __BUILD_MEMORY_STRING(b, u8)
 __BUILD_MEMORY_STRING(w, u16)
+__BUILD_MEMORY_STRING(q, u64)
+
+void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 
-#define writesb	__raw_writesb
-#define writesw	__raw_writesw
-#define writesl __raw_writesl
+#define writesb			__raw_writesb
+#define writesw			__raw_writesw
+#define writesl			__raw_writesl
 
-#define readsb	__raw_readsb
-#define readsw	__raw_readsw
-#define readsl  __raw_readsl
+#define readsb			__raw_readsb
+#define readsw			__raw_readsw
+#define readsl			__raw_readsl
 
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
+#define readb_relaxed(a)	readb(a)
+#define readw_relaxed(a)	readw(a)
+#define readl_relaxed(a)	readl(a)
+#define readq_relaxed(a)	readq(a)
 
 /* Simple MMIO */
 #define ioread8(a)		__raw_readb(a)
@@ -185,15 +162,17 @@ __BUILD_MEMORY_STRING(w, u16)
 #define iowrite16_rep(a, s, c)	__raw_writesw((a), (s), (c))
 #define iowrite32_rep(a, s, c)	__raw_writesl((a), (s), (c))
 
-#define mmiowb()	wmb()	/* synco on SH-4A, otherwise a nop */
+/* synco on SH-4A, otherwise a nop */
+#define mmiowb()		wmb()
 
 #define IO_SPACE_LIMIT 0xffffffff
 
 extern unsigned long generic_io_base;
 
 /*
- * This function provides a method for the generic case where a board-specific
- * ioport_map simply needs to return the port + some arbitrary port base.
+ * This function provides a method for the generic case where a
+ * board-specific ioport_map simply needs to return the port + some
+ * arbitrary port base.
  *
  * We use this at board setup time to implicitly set the port base, and
  * as a result, we can use the generic ioport_map.
@@ -206,57 +185,9 @@ static inline void __set_io_port_base(unsigned long pbase)
 #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
 
 /* We really want to try and get these to memcpy etc */
-extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
-extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
-extern void memset_io(volatile void __iomem *, int, unsigned long);
-
-/* SuperH on-chip I/O functions */
-static inline unsigned char ctrl_inb(unsigned long addr)
-{
-	return *(volatile unsigned char*)addr;
-}
-
-static inline unsigned short ctrl_inw(unsigned long addr)
-{
-	return *(volatile unsigned short*)addr;
-}
-
-static inline unsigned int ctrl_inl(unsigned long addr)
-{
-	return *(volatile unsigned long*)addr;
-}
-
-static inline unsigned long long ctrl_inq(unsigned long addr)
-{
-	return *(volatile unsigned long long*)addr;
-}
-
-static inline void ctrl_outb(unsigned char b, unsigned long addr)
-{
-	*(volatile unsigned char*)addr = b;
-}
-
-static inline void ctrl_outw(unsigned short b, unsigned long addr)
-{
-	*(volatile unsigned short*)addr = b;
-}
-
-static inline void ctrl_outl(unsigned int b, unsigned long addr)
-{
-        *(volatile unsigned long*)addr = b;
-}
-
-static inline void ctrl_outq(unsigned long long b, unsigned long addr)
-{
-	*(volatile unsigned long long*)addr = b;
-}
-
-static inline void ctrl_delay(void)
-{
-#ifdef P2SEG
-	ctrl_inw(P2SEG);
-#endif
-}
+void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
+void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+void memset_io(volatile void __iomem *, int, unsigned long);
 
 /* Quad-word real-mode I/O, don't ask.. */
 unsigned long long peek_real_address_q(unsigned long long addr);
@@ -347,6 +278,10 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 #define iounmap(addr)					\
 	__iounmap((addr))
 
+#define maybebadio(port) \
+	printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
+	       __func__, __LINE__, (port), (u32)__builtin_return_address(0))
+
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
index 92fc607..1e5d375 100644
--- a/arch/sh/include/asm/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
@@ -33,13 +33,6 @@ void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long
 void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
 void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
 
-u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *);
-u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *);
-u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *);
-
 void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
 void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
 
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index b2e4124..f1bae02 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -42,13 +42,6 @@ struct sh_machine_vector {
 	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
 	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
 
-	u8 (*mv_readb)(void __iomem *);
-	u16 (*mv_readw)(void __iomem *);
-	u32 (*mv_readl)(void __iomem *);
-	void (*mv_writeb)(u8, void __iomem *);
-	void (*mv_writew)(u16, void __iomem *);
-	void (*mv_writel)(u32, void __iomem *);
-
 	int (*mv_irq_demux)(int irq);
 
 	void (*mv_init_irq)(void);