Merge branch 'linus' into stackprotector

Conflicts:
	arch/x86/include/asm/pda.h
	kernel/fork.c

1 files changed, 431 insertions, 0 deletions

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
new file mode 100644
index 0000000..2f6340a
--- /dev/null
+++ b/arch/x86/include/asm/system.h
@@ -0,0 +1,431 @@
+#ifndef _ASM_X86_SYSTEM_H
+#define _ASM_X86_SYSTEM_H
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+struct task_struct; /* one of the stranger aspects of C forward declarations */
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next);
+
+#ifdef CONFIG_X86_32
+
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
+#define switch_to(prev, next, last)					\
+do {									\
+	/*								\
+	 * Context-switching clobbers all registers, so we clobber	\
+	 * them explicitly, via unused output variables.		\
+	 * (EAX and EBP is not listed because EBP is saved/restored	\
+	 * explicitly for wchan access and EAX is the return value of	\
+	 * __switch_to())						\
+	 */								\
+	unsigned long ebx, ecx, edx, esi, edi;				\
+									\
+	asm volatile("pushfl\n\t"		/* save    flags */	\
+		     "pushl %%ebp\n\t"		/* save    EBP   */	\
+		     "movl %%esp,%[prev_sp]\n\t"	/* save    ESP   */ \
+		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
+		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
+		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
+		     "jmp __switch_to\n"	/* regparm call  */	\
+		     "1:\t"						\
+		     "popl %%ebp\n\t"		/* restore EBP   */	\
+		     "popfl\n"			/* restore flags */	\
+									\
+		     /* output parameters */				\
+		     : [prev_sp] "=m" (prev->thread.sp),		\
+		       [prev_ip] "=m" (prev->thread.ip),		\
+		       "=a" (last),					\
+									\
+		       /* clobbered output registers: */		\
+		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
+		       "=S" (esi), "=D" (edi)				\
+		       							\
+		       /* input parameters: */				\
+		     : [next_sp]  "m" (next->thread.sp),		\
+		       [next_ip]  "m" (next->thread.ip),		\
+		       							\
+		       /* regparm parameters for __switch_to(): */	\
+		       [prev]     "a" (prev),				\
+		       [next]     "d" (next)				\
+									\
+		     : /* reloaded segment registers */			\
+			"memory");					\
+} while (0)
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+#else
+#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
+#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
+
+/* frame pointer must be last for get_wchan */
+#define SAVE_CONTEXT    "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
+
+#define __EXTRA_CLOBBER  \
+	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
+	  "r12", "r13", "r14", "r15"
+
+/* Save restore flags to clear handle leaking NT */
+#define switch_to(prev, next, last) \
+	asm volatile(SAVE_CONTEXT						    \
+	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
+	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
+	     "call __switch_to\n\t"					  \
+	     ".globl thread_return\n"					  \
+	     "thread_return:\n\t"					  \
+	     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
+	     "movq %P[task_canary](%%rsi),%%r8\n\t"			  \
+	     "movq %%r8,%%gs:%P[pda_canary]\n\t"			  \
+	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
+	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
+	     "movq %%rax,%%rdi\n\t" 					  \
+	     "jc   ret_from_fork\n\t"					  \
+	     RESTORE_CONTEXT						  \
+	     : "=a" (last)					  	  \
+	     : [next] "S" (next), [prev] "D" (prev),			  \
+	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
+	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
+	       [tif_fork] "i" (TIF_FORK),			  	  \
+	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
+	       [task_canary] "i" (offsetof(struct task_struct, stack_canary)),\
+	       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent)), \
+	       [pda_canary] "i" (offsetof(struct x8664_pda, stack_canary))\
+	     : "memory", "cc" __EXTRA_CLOBBER)
+#endif
+
+#ifdef __KERNEL__
+#define _set_base(addr, base) do { unsigned long __pr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %%dl,%2\n\t" \
+	"movb %%dh,%3" \
+	:"=&d" (__pr) \
+	:"m" (*((addr)+2)), \
+	 "m" (*((addr)+4)), \
+	 "m" (*((addr)+7)), \
+	 "0" (base) \
+	); } while (0)
+
+#define _set_limit(addr, limit) do { unsigned long __lr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %2,%%dh\n\t" \
+	"andb $0xf0,%%dh\n\t" \
+	"orb %%dh,%%dl\n\t" \
+	"movb %%dl,%2" \
+	:"=&d" (__lr) \
+	:"m" (*(addr)), \
+	 "m" (*((addr)+6)), \
+	 "0" (limit) \
+	); } while (0)
+
+#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
+#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
+
+extern void native_load_gs_index(unsigned);
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg, value)			\
+	asm volatile("\n"			\
+		     "1:\t"			\
+		     "movl %k0,%%" #seg "\n"	\
+		     "2:\n"			\
+		     ".section .fixup,\"ax\"\n"	\
+		     "3:\t"			\
+		     "movl %k1, %%" #seg "\n\t"	\
+		     "jmp 2b\n"			\
+		     ".previous\n"		\
+		     _ASM_EXTABLE(1b,3b)	\
+		     : :"r" (value), "r" (0) : "memory")
+
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value)				\
+	asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+	unsigned long __limit;
+	asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
+	return __limit + 1;
+}
+
+static inline void native_clts(void)
+{
+	asm volatile("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+	asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+	unsigned long val;
+	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+	 * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+	asm volatile("1: mov %%cr4, %0\n"
+		     "2:\n"
+		     _ASM_EXTABLE(1b, 2b)
+		     : "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+	val = native_read_cr4();
+#endif
+	return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+	asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long native_read_cr8(void)
+{
+	unsigned long cr8;
+	asm volatile("movq %%cr8,%0" : "=r" (cr8));
+	return cr8;
+}
+
+static inline void native_write_cr8(unsigned long val)
+{
+	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
+}
+#endif
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0()	(native_read_cr0())
+#define write_cr0(x)	(native_write_cr0(x))
+#define read_cr2()	(native_read_cr2())
+#define write_cr2(x)	(native_write_cr2(x))
+#define read_cr3()	(native_read_cr3())
+#define write_cr3(x)	(native_write_cr3(x))
+#define read_cr4()	(native_read_cr4())
+#define read_cr4_safe()	(native_read_cr4_safe())
+#define write_cr4(x)	(native_write_cr4(x))
+#define wbinvd()	(native_wbinvd())
+#ifdef CONFIG_X86_64
+#define read_cr8()	(native_read_cr8())
+#define write_cr8(x)	(native_write_cr8(x))
+#define load_gs_index   native_load_gs_index
+#endif
+
+/* Clear the 'TS' bit */
+#define clts()		(native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(read_cr0() | X86_CR0_TS)
+
+#endif /* __KERNEL__ */
+
+static inline void clflush(volatile void *__p)
+{
+	asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
+}
+
+#define nop() asm volatile ("nop")
+
+void disable_hlt(void);
+void enable_hlt(void);
+
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
+
+void default_idle(void);
+
+void stop_this_cpu(void *dummy);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif /* _ASM_X86_SYSTEM_H */