Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 old platform removal from Peter Anvin:
 "This patchset removes support for several completely obsolete
  platforms, where the maintainers either have completely vanished or
  acked the removal.  For some of them it is questionable if there even
  exists functional specimens of the hardware"

Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)

* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, platforms: Remove NUMAQ
  x86, platforms: Remove SGI Visual Workstation
  x86, apic: Remove support for IBM Summit/EXA chipset
  x86, apic: Remove support for ia32-based Unisys ES7000

4 files changed, 1 insertions, 259 deletions

diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e063eed..5c6fc35 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -13,9 +13,6 @@ obj-y				+= legacy.o irq.o
 
 obj-$(CONFIG_STA2X11)           += sta2x11-fixup.o
 
-obj-$(CONFIG_X86_VISWS)		+= visws.o
-
-obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)	+= numachip.o
 
 obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_pci.o
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index d491ded..059a76c 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -567,7 +567,6 @@ char * __init pcibios_setup(char *str)
 		pci_probe |= PCI_PROBE_NOEARLY;
 		return NULL;
 	}
-#ifndef CONFIG_X86_VISWS
 	else if (!strcmp(str, "usepirqmask")) {
 		pci_probe |= PCI_USE_PIRQ_MASK;
 		return NULL;
@@ -577,9 +576,7 @@ char * __init pcibios_setup(char *str)
 	} else if (!strncmp(str, "lastbus=", 8)) {
 		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
 		return NULL;
-	}
-#endif
-	else if (!strcmp(str, "rom")) {
+	} else if (!strcmp(str, "rom")) {
 		pci_probe |= PCI_ASSIGN_ROMS;
 		return NULL;
 	} else if (!strcmp(str, "norom")) {
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
deleted file mode 100644
index 080eb03..0000000
--- a/arch/x86/pci/numaq_32.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * numaq_32.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <asm/apic.h>
-#include <asm/mpspec.h>
-#include <asm/pci_x86.h>
-#include <asm/numaq.h>
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
-	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
-	if (xquad_portio)
-		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
-	else
-		outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
-			     unsigned int devfn, int reg, int len, u32 *value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	WARN_ON(seg);
-	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			*value = readb(adr + (reg & 3));
-		else
-			*value = inb(0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			*value = readw(adr + (reg & 2));
-		else
-			*value = inw(0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			*value = readl(adr);
-		else
-			*value = inl(0xCFC);
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
-			      unsigned int devfn, int reg, int len, u32 value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	WARN_ON(seg);
-	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			writeb(value, adr + (reg & 3));
-		else
-			outb((u8)value, 0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			writew(value, adr + (reg & 2));
-		else
-			outw((u16)value, 0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			writel(value, adr + reg);
-		else
-			outl((u32)value, 0xCFC);
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static const struct pci_raw_ops pci_direct_conf1_mq = {
-	.read	= pci_conf1_mq_read,
-	.write	= pci_conf1_mq_write
-};
-
-
-static void pci_fixup_i450nx(struct pci_dev *d)
-{
-	/*
-	 * i450NX -- Find and scan all secondary buses on all PXB's.
-	 */
-	int pxb, reg;
-	u8 busno, suba, subb;
-	int quad = BUS2QUAD(d->bus->number);
-
-	dev_info(&d->dev, "searching for i450NX host bridges\n");
-	reg = 0xd0;
-	for(pxb=0; pxb<2; pxb++) {
-		pci_read_config_byte(d, reg++, &busno);
-		pci_read_config_byte(d, reg++, &suba);
-		pci_read_config_byte(d, reg++, &subb);
-		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
-			pxb, busno, suba, subb);
-		if (busno) {
-			/* Bus A */
-			pcibios_scan_root(QUADLOCAL2BUS(quad, busno));
-		}
-		if (suba < subb) {
-			/* Bus B */
-			pcibios_scan_root(QUADLOCAL2BUS(quad, suba+1));
-		}
-	}
-	pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numaq_init(void)
-{
-	int quad;
-
-	raw_pci_ops = &pci_direct_conf1_mq;
-
-	pcibios_scan_root(0);
-	if (num_online_nodes() > 1)
-		for_each_online_node(quad) {
-			if (quad == 0)
-				continue;
-			printk("Scanning PCI bus %d for quad %d\n", 
-				QUADLOCAL2BUS(quad,0), quad);
-			pcibios_scan_root(QUADLOCAL2BUS(quad, 0));
-		}
-	return 0;
-}
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
deleted file mode 100644
index cd9d4d1..0000000
--- a/arch/x86/pci/visws.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *	Low-Level PCI Support for SGI Visual Workstation
- *
- *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/pci_x86.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
-static void pci_visws_disable_irq(struct pci_dev *dev) { }
-
-/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
-/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
-
-/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
-
-
-unsigned int pci_bus0, pci_bus1;
-
-static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq, bus = dev->bus->number;
-
-	pin--;
-
-	/* Nothing useful at PIIX4 pin 1 */
-	if (bus == pci_bus0 && slot == 4 && pin == 0)
-		return -1;
-
-	/* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
-	if (bus == pci_bus0 && slot == 4 && pin == 3) {
-		irq = CO_IRQ(CO_APIC_PIIX4_USB);
-		goto out;
-	}
-
-	/* First pin spread down 1 APIC entry per slot */
-	if (pin == 0) {
-		irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
-						CO_APIC_PCIA_BASE0) + slot);
-		goto out;
-	}
-
-	/* lines 1,2,3 from any slot is shared in this twirly pattern */
-	if (bus == pci_bus1) {
-		/* lines 1-3 from devices 0 1 rotate over 2 apic entries */
-		irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
-	} else { /* bus == pci_bus0 */
-		/* lines 1-3 from devices 0-3 rotate over 3 apic entries */
-		if (slot == 0)
-			slot = 3; /* same pattern */
-		irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
-	}
-out:
-	printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
-	return irq;
-}
-
-int __init pci_visws_init(void)
-{
-	pcibios_enable_irq = &pci_visws_enable_irq;
-	pcibios_disable_irq = &pci_visws_disable_irq;
-
-	/* The VISWS supports configuration access type 1 only */
-	pci_probe = (pci_probe | PCI_PROBE_CONF1) &
-		    ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
-
-	pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
-	pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
-
-	printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
-		"bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
-
-	raw_pci_ops = &pci_direct_conf1;
-	pcibios_scan_root(pci_bus0);
-	pcibios_scan_root(pci_bus1);
-	pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
-	pcibios_resource_survey();
-	/* Request bus scan */
-	return 1;
-}