x86/mid: Remove Intel Moorestown

All production devices operate in the Oaktrail configuration
with legacy PC elements present and an ACPI BIOS. Continue
stripping out the Moorestown elements from the tree leaving
Medfield.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: jacob.jun.pan@linux.intel.com
Link: http://lkml.kernel.org/n/tip-fvm1hgpq99jln6l0fbek68ik@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

6 files changed, 26 insertions, 1115 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 864cc6e..a13addb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -418,27 +418,6 @@ if X86_WANT_INTEL_MID
 config X86_INTEL_MID
 	bool
 
-config X86_MRST
-       bool "Moorestown MID platform"
-	depends on PCI
-	depends on PCI_GOANY
-	depends on X86_IO_APIC
-	select X86_INTEL_MID
-	select SFI
-	select DW_APB_TIMER
-	select APB_TIMER
-	select I2C
-	select SPI
-	select INTEL_SCU_IPC
-	select X86_PLATFORM_DEVICES
-	---help---
-	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
-	  Internet Device(MID) platform. Moorestown consists of two chips:
-	  Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
-	  Unlike standard x86 PCs, Moorestown does not have many legacy devices
-	  nor standard legacy replacement devices/features. e.g. Moorestown does
-	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
-
 config X86_MDFLD
        bool "Medfield MID platform"
 	depends on PCI
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 0a0a954..fc18bf3 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -26,8 +26,8 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[];
  * identified via MSRs.
  */
 enum mrst_cpu_type {
-	MRST_CPU_CHIP_LINCROFT = 1,
-	MRST_CPU_CHIP_PENWELL,
+	/* 1 was Moorestown */
+	MRST_CPU_CHIP_PENWELL = 2,
 };
 
 extern enum mrst_cpu_type __mrst_cpu_chip;
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index 7baed51..af1da7e 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,4 +1,3 @@
 obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
 obj-$(CONFIG_X86_INTEL_MID)	+= vrtc.o
 obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_mrst.o
-obj-$(CONFIG_X86_MRST)		+= pmu.o
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 475e2cd..6743587 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -78,16 +78,11 @@ int sfi_mrtc_num;
 
 static void mrst_power_off(void)
 {
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
-		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
 }
 
 static void mrst_reboot(void)
 {
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
-		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
-	else
-		intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
 }
 
 /* parse all the mtimer info to a static mtimer array */
@@ -200,34 +195,28 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 
 static unsigned long __init mrst_calibrate_tsc(void)
 {
-	unsigned long flags, fast_calibrate;
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
-		u32 lo, hi, ratio, fsb;
-
-		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-		pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
-		ratio = (hi >> 8) & 0x1f;
-		pr_debug("ratio is %d\n", ratio);
-		if (!ratio) {
-			pr_err("read a zero ratio, should be incorrect!\n");
-			pr_err("force tsc ratio to 16 ...\n");
-			ratio = 16;
-		}
-		rdmsr(MSR_FSB_FREQ, lo, hi);
-		if ((lo & 0x7) == 0x7)
-			fsb = PENWELL_FSB_FREQ_83SKU;
-		else
-			fsb = PENWELL_FSB_FREQ_100SKU;
-		fast_calibrate = ratio * fsb;
-		pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
-		lapic_timer_frequency = fsb * 1000 / HZ;
-		/* mark tsc clocksource as reliable */
-		set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-	} else {
-		local_irq_save(flags);
-		fast_calibrate = apbt_quick_calibrate();
-		local_irq_restore(flags);
+	unsigned long fast_calibrate;
+	u32 lo, hi, ratio, fsb;
+
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+	ratio = (hi >> 8) & 0x1f;
+	pr_debug("ratio is %d\n", ratio);
+	if (!ratio) {
+		pr_err("read a zero ratio, should be incorrect!\n");
+		pr_err("force tsc ratio to 16 ...\n");
+		ratio = 16;
 	}
+	rdmsr(MSR_FSB_FREQ, lo, hi);
+	if ((lo & 0x7) == 0x7)
+		fsb = PENWELL_FSB_FREQ_83SKU;
+	else
+		fsb = PENWELL_FSB_FREQ_100SKU;
+	fast_calibrate = ratio * fsb;
+	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+	lapic_timer_frequency = fsb * 1000 / HZ;
+	/* mark tsc clocksource as reliable */
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
 	
 	if (fast_calibrate)
 		return fast_calibrate;
@@ -261,16 +250,11 @@ static void __cpuinit mrst_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
 		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
-		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
 	else {
-		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
+		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
 			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
 	}
-	pr_debug("Moorestown CPU %s identified\n",
-		(__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
-		"Lincroft" : "Penwell");
 }
 
 /* MID systems don't have i8042 controller */
diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c
deleted file mode 100644
index c0ac06d..0000000
--- a/arch/x86/platform/mrst/pmu.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/*
- * mrst/pmu.c - driver for MRST Power Management Unit
- *
- * Copyright (c) 2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/cpuidle.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/sfi.h>
-#include <asm/intel_scu_ipc.h>
-#include "pmu.h"
-
-#define IPCMSG_FW_REVISION	0xF4
-
-struct mrst_device {
-	u16 pci_dev_num;	/* DEBUG only */
-	u16 lss;
-	u16 latest_request;
-	unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
-};
-
-/*
- * comlete list of MRST PCI devices
- */
-static struct mrst_device mrst_devs[] = {
-/*  0 */ { 0x0800, LSS_SPI0 },		/* Moorestown SPI Ctrl 0 */
-/*  1 */ { 0x0801, LSS_SPI1 },		/* Moorestown SPI Ctrl 1 */
-/*  2 */ { 0x0802, LSS_I2C0 },		/* Moorestown I2C 0 */
-/*  3 */ { 0x0803, LSS_I2C1 },		/* Moorestown I2C 1 */
-/*  4 */ { 0x0804, LSS_I2C2 },		/* Moorestown I2C 2 */
-/*  5 */ { 0x0805, LSS_KBD },		/* Moorestown Keyboard Ctrl */
-/*  6 */ { 0x0806, LSS_USB_HC },	/* Moorestown USB Ctrl */
-/*  7 */ { 0x0807, LSS_SD_HC0 },	/* Moorestown SD Host Ctrl 0 */
-/*  8 */ { 0x0808, LSS_SD_HC1 },	/* Moorestown SD Host Ctrl 1 */
-/*  9 */ { 0x0809, LSS_NAND },		/* Moorestown NAND Ctrl */
-/* 10 */ { 0x080a, LSS_AUDIO },		/* Moorestown Audio Ctrl */
-/* 11 */ { 0x080b, LSS_IMAGING },	/* Moorestown ISP */
-/* 12 */ { 0x080c, LSS_SECURITY },	/* Moorestown Security Controller */
-/* 13 */ { 0x080d, LSS_DISPLAY },	/* Moorestown External Displays */
-/* 14 */ { 0x080e, 0 },			/* Moorestown SCU IPC */
-/* 15 */ { 0x080f, LSS_GPIO },		/* Moorestown GPIO Controller */
-/* 16 */ { 0x0810, 0 },			/* Moorestown Power Management Unit */
-/* 17 */ { 0x0811, LSS_USB_OTG },	/* Moorestown OTG Ctrl */
-/* 18 */ { 0x0812, LSS_SPI2 },		/* Moorestown SPI Ctrl 2 */
-/* 19 */ { 0x0813, 0 },			/* Moorestown SC DMA */
-/* 20 */ { 0x0814, LSS_AUDIO_LPE },	/* Moorestown LPE DMA */
-/* 21 */ { 0x0815, LSS_AUDIO_SSP },	/* Moorestown SSP0 */
-
-/* 22 */ { 0x084F, LSS_SD_HC2 },	/* Moorestown SD Host Ctrl 2 */
-
-/* 23 */ { 0x4102, 0 },			/* Lincroft */
-/* 24 */ { 0x4110, 0 },			/* Lincroft */
-};
-
-/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */
-static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
-static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
-					0x0804, 0x0805, 0x080f, 0};
-
-/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
-static spinlock_t mrst_pmu_power_state_lock;
-
-static unsigned int wake_counters[MRST_NUM_LSS];	/* DEBUG only */
-static unsigned int pmu_irq_stats[INT_INVALID + 1];	/* DEBUG only */
-
-static int graphics_is_off;
-static int lss_s0i3_enabled;
-static bool mrst_pmu_s0i3_enable;
-
-/*  debug counters */
-static u32 pmu_wait_ready_calls;
-static u32 pmu_wait_ready_udelays;
-static u32 pmu_wait_ready_udelays_max;
-static u32 pmu_wait_done_calls;
-static u32 pmu_wait_done_udelays;
-static u32 pmu_wait_done_udelays_max;
-static u32 pmu_set_power_state_entry;
-static u32 pmu_set_power_state_send_cmd;
-
-static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
-{
-	int index = 0;
-
-	if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
-		index = pci_dev_num - 0x800;
-	else if (pci_dev_num == 0x084F)
-		index = 22;
-	else if (pci_dev_num == 0x4102)
-		index = 23;
-	else if (pci_dev_num == 0x4110)
-		index = 24;
-
-	if (pci_dev_num != mrst_devs[index].pci_dev_num) {
-		WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num);
-		return 0;
-	}
-
-	return &mrst_devs[index];
-}
-
-/**
- * mrst_pmu_validate_cstates
- * @dev: cpuidle_device
- *
- * Certain states are not appropriate for governor to pick in some cases.
- * This function will be called as cpuidle_device's prepare callback and
- * thus tells governor to ignore such states when selecting the next state
- * to enter.
- */
-
-#define IDLE_STATE4_IS_C6	4
-#define IDLE_STATE5_IS_S0I3	5
-
-int mrst_pmu_invalid_cstates(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Demote to C4 if the PMU is busy.
-	 * Since LSS changes leave the busy bit clear...
-	 * busy means either the PMU is waiting for an ACK-C6 that
-	 * isn't coming due to an MWAIT that returned immediately;
-	 * or we returned from S0i3 successfully, and the PMU
-	 * is not done sending us interrupts.
-	 */
-	if (pmu_read_busy_status())
-		return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3;
-
-	/*
-	 * Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
-	 * or if device LSS is insufficient, or the GPU is active,
-	 * or if it has been explicitly disabled.
-	 */
-	if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
-	    !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable)
-		return 1 << IDLE_STATE5_IS_S0I3;
-	else
-		return 0;
-}
-
-/*
- * pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
- * DEBUG only.
- */
-static void pmu_update_wake_counters(void)
-{
-	int lss;
-	u32 wake_status;
-
-	wake_status = pmu_read_wks();
-
-	for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
-		if (wake_status & (1 << lss))
-			wake_counters[lss]++;
-	}
-}
-
-int mrst_pmu_s0i3_entry(void)
-{
-	int status;
-
-	/* Clear any possible error conditions */
-	pmu_write_ics(0x300);
-
-	/* set wake control to current D-states */
-	pmu_write_wssc(S0I3_SSS_TARGET);
-
-	status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
-	pmu_update_wake_counters();
-	return status;
-}
-
-/* poll for maximum of 5ms for busy bit to clear */
-static int pmu_wait_ready(void)
-{
-	int udelays;
-
-	pmu_wait_ready_calls++;
-
-	for (udelays = 0; udelays < 500; ++udelays) {
-		if (udelays > pmu_wait_ready_udelays_max)
-			pmu_wait_ready_udelays_max = udelays;
-
-		if (pmu_read_busy_status() == 0)
-			return 0;
-
-		udelay(10);
-		pmu_wait_ready_udelays++;
-	}
-
-	/*
-	 * if this fires, observe
-	 * /sys/kernel/debug/mrst_pmu_wait_ready_calls
-	 * /sys/kernel/debug/mrst_pmu_wait_ready_udelays
-	 */
-	WARN_ONCE(1, "SCU not ready for 5ms");
-	return -EBUSY;
-}
-/* poll for maximum of 50ms us for busy bit to clear */
-static int pmu_wait_done(void)
-{
-	int udelays;
-
-	pmu_wait_done_calls++;
-
-	for (udelays = 0; udelays < 500; ++udelays) {
-		if (udelays > pmu_wait_done_udelays_max)
-			pmu_wait_done_udelays_max = udelays;
-
-		if (pmu_read_busy_status() == 0)
-			return 0;
-
-		udelay(100);
-		pmu_wait_done_udelays++;
-	}
-
-	/*
-	 * if this fires, observe
-	 * /sys/kernel/debug/mrst_pmu_wait_done_calls
-	 * /sys/kernel/debug/mrst_pmu_wait_done_udelays
-	 */
-	WARN_ONCE(1, "SCU not done for 50ms");
-	return -EBUSY;
-}
-
-u32 mrst_pmu_msi_is_disabled(void)
-{
-	return pmu_msi_is_disabled();
-}
-
-void mrst_pmu_enable_msi(void)
-{
-	pmu_msi_enable();
-}
-
-/**
- * pmu_irq - pmu driver interrupt handler
- * Context: interrupt context
- */
-static irqreturn_t pmu_irq(int irq, void *dummy)
-{
-	union pmu_pm_ics pmu_ics;
-
-	pmu_ics.value = pmu_read_ics();
-
-	if (!pmu_ics.bits.pending)
-		return IRQ_NONE;
-
-	switch (pmu_ics.bits.cause) {
-	case INT_SPURIOUS:
-	case INT_CMD_DONE:
-	case INT_CMD_ERR:
-	case INT_WAKE_RX:
-	case INT_SS_ERROR:
-	case INT_S0IX_MISS:
-	case INT_NO_ACKC6:
-		pmu_irq_stats[pmu_ics.bits.cause]++;
-		break;
-	default:
-		pmu_irq_stats[INT_INVALID]++;
-	}
-
-	pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Translate PCI power management to MRST LSS D-states
- */
-static int pci_2_mrst_state(int lss, pci_power_t pci_state)
-{
-	switch (pci_state) {
-	case PCI_D0:
-		if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
-			return D0i1;
-		else
-			return D0;
-	case PCI_D1:
-		return D0i1;
-	case PCI_D2:
-		return D0i2;
-	case PCI_D3hot:
-	case PCI_D3cold:
-		return D0i3;
-	default:
-		WARN(1, "pci_state %d\n", pci_state);
-		return 0;
-	}
-}
-
-static int pmu_issue_command(u32 pm_ssc)
-{
-	union pmu_pm_set_cfg_cmd_t command;
-
-	if (pmu_read_busy_status()) {
-		pr_debug("pmu is busy, Operation not permitted\n");
-		return -1;
-	}
-
-	/*
-	 * enable interrupts in PMU so that interrupts are
-	 * propagated when ioc bit for a particular set
-	 * command is set
-	 */
-
-	pmu_irq_enable();
-
-	/* Configure the sub systems for pmu2 */
-
-	pmu_write_ssc(pm_ssc);
-
-	/*
-	 * Send the set config command for pmu its configured
-	 * for mode CM_IMMEDIATE & hence with No Trigger
-	 */
-
-	command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
-	command.pmu2_params.d_param.cfg_delay = 0;
-	command.pmu2_params.d_param.rsvd = 0;
-
-	/* construct the command to send SET_CFG to particular PMU */
-	command.pmu2_params.d_param.cmd = SET_CFG_CMD;
-	command.pmu2_params.d_param.ioc = 0;
-	command.pmu2_params.d_param.mode_id = 0;
-	command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
-
-	/* write the value of PM_CMD into particular PMU */
-	pr_debug("pmu command being written %x\n",
-			command.pmu_pm_set_cfg_cmd_value);
-
-	pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
-
-	return 0;
-}
-
-static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
-{
-	u16 existing_request;
-	int i;
-
-	for (i = 0; ids[i]; ++i) {
-		struct mrst_device *mrst_dev;
-
-		mrst_dev = pci_id_2_mrst_dev(ids[i]);
-		if (unlikely(!mrst_dev))
-			continue;
-
-		existing_request = mrst_dev->latest_request;
-		if (existing_request < pci_state)
-			pci_state = existing_request;
-	}
-	return pci_state;
-}
-
-/**
- * pmu_pci_set_power_state - Callback function is used by all the PCI devices
- *			for a platform  specific device power on/shutdown.
- */
-
-int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
-{
-	u32 old_sss, new_sss;
-	int status = 0;
-	struct mrst_device *mrst_dev;
-
-	pmu_set_power_state_entry++;
-
-	BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
-	BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
-
-	mrst_dev = pci_id_2_mrst_dev(pdev->device);
-	if (unlikely(!mrst_dev))
-		return -ENODEV;
-
-	mrst_dev->pci_state_counts[pci_state]++;	/* count invocations */
-
-	/* PMU driver calls self as part of PCI initialization, ignore */
-	if (pdev->device == PCI_DEV_ID_MRST_PMU)
-		return 0;
-
-	BUG_ON(!pmu_reg); /* SW bug if called before initialized */
-
-	spin_lock(&mrst_pmu_power_state_lock);
-
-	if (pdev->d3_delay) {
-		dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
-			pdev->d3_delay);
-		pdev->d3_delay = 0;
-	}
-	/*
-	 * If Lincroft graphics, simply remember state
-	 */
-	if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
-		&& !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
-		if (pci_state == PCI_D0)
-			graphics_is_off = 0;
-		else
-			graphics_is_off = 1;
-		goto ret;
-	}
-
-	if (!mrst_dev->lss)
-		goto ret;	/* device with no LSS */
-
-	if (mrst_dev->latest_request == pci_state)
-		goto ret;	/* no change */
-
-	mrst_dev->latest_request = pci_state;	/* record latest request */
-
-	/*
-	 * LSS9 and LSS10 contain multiple PCI devices.
-	 * Use the lowest numbered (highest power) state in the LSS
-	 */
-	if (mrst_dev->lss == 9)
-		pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
-	else if (mrst_dev->lss == 10)
-		pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
-
-	status = pmu_wait_ready();
-	if (status)
-		goto ret;
-
-	old_sss = pmu_read_sss();
-	new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
-	new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
-			mrst_dev->lss);
-
-	if (new_sss == old_sss)
-		goto ret;	/* nothing to do */
-
-	pmu_set_power_state_send_cmd++;
-
-	status = pmu_issue_command(new_sss);
-
-	if (unlikely(status != 0)) {
-		dev_err(&pdev->dev, "Failed to Issue a PM command\n");
-		goto ret;
-	}
-
-	if (pmu_wait_done())
-		goto ret;
-
-	lss_s0i3_enabled =
-	((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
-ret:
-	spin_unlock(&mrst_pmu_power_state_lock);
-	return status;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
-
-static inline const char *d0ix_name(int state)
-{
-	return d0ix_names[(int) state];
-}
-
-static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
-{
-	struct pci_dev *pdev = NULL;
-	u32 cur_pmsss;
-	int lss;
-
-	seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
-
-	cur_pmsss = pmu_read_sss();
-
-	seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
-
-	seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
-	seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
-
-	if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
-		seq_printf(s, "cpu0 is only cpu online\n");
-	else
-		seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
-
-	seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
-
-
-	for_each_pci_dev(pdev) {
-		int pos;
-		u16 pmcsr;
-		struct mrst_device *mrst_dev;
-		int i;
-
-		mrst_dev = pci_id_2_mrst_dev(pdev->device);
-
-		seq_printf(s, "%s %04x/%04X %-16.16s ",
-			dev_name(&pdev->dev),
-			pdev->vendor, pdev->device,
-			dev_driver_string(&pdev->dev));
-
-		if (unlikely (!mrst_dev)) {
-			seq_printf(s, " UNKNOWN\n");
-			continue;
-		}
-
-		if (mrst_dev->lss)
-			seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
-				d0ix_name(((cur_pmsss >>
-					(mrst_dev->lss * 2)) & 0x3)));
-		else
-			seq_printf(s, "            ");
-
-		/* PCI PM config space setting */
-		pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
-		if (pos != 0) {
-			pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
-		seq_printf(s, "PCI-%-4s",
-			pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
-		} else {
-			seq_printf(s, "        ");
-		}
-
-		seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
-		for (i = 0; i <= PCI_D3cold; ++i)
-			seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
-
-		if (mrst_dev->lss) {
-			unsigned int lssmask;
-
-			lssmask = SSMSK(D0i3, mrst_dev->lss);
-
-			if ((lssmask & S0I3_SSS_TARGET) &&
-				((lssmask & cur_pmsss) !=
-					(lssmask & S0I3_SSS_TARGET)))
-						seq_printf(s , "[BLOCKS s0i3]");
-		}
-
-		seq_printf(s, "\n");
-	}
-	seq_printf(s, "Wake Counters:\n");
-	for (lss = 0; lss < MRST_NUM_LSS; ++lss)
-		seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
-
-	seq_printf(s, "Interrupt Counters:\n");
-	seq_printf(s,
-		"INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
-		"INT_CMD_ERR  \t%8u\n" "INT_WAKE_RX  \t%8u\n"
-		"INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
-		"INT_NO_ACKC6 \t%8u\n" "INT_INVALID  \t%8u\n",
-		pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
-		pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
-		pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
-		pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
-
-	seq_printf(s, "mrst_pmu_wait_ready_calls          %8d\n",
-			pmu_wait_ready_calls);
-	seq_printf(s, "mrst_pmu_wait_ready_udelays        %8d\n",
-			pmu_wait_ready_udelays);
-	seq_printf(s, "mrst_pmu_wait_ready_udelays_max    %8d\n",
-			pmu_wait_ready_udelays_max);
-	seq_printf(s, "mrst_pmu_wait_done_calls           %8d\n",
-			pmu_wait_done_calls);
-	seq_printf(s, "mrst_pmu_wait_done_udelays         %8d\n",
-			pmu_wait_done_udelays);
-	seq_printf(s, "mrst_pmu_wait_done_udelays_max     %8d\n",
-			pmu_wait_done_udelays_max);
-	seq_printf(s, "mrst_pmu_set_power_state_entry     %8d\n",
-			pmu_set_power_state_entry);
-	seq_printf(s, "mrst_pmu_set_power_state_send_cmd  %8d\n",
-			pmu_set_power_state_send_cmd);
-	seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
-
-	return 0;
-}
-
-static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, debug_mrst_pmu_show, NULL);
-}
-
-static const struct file_operations devices_state_operations = {
-	.open		= debug_mrst_pmu_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-#endif	/* DEBUG_FS */
-
-/*
- * Validate SCU PCI shim PCI vendor capability byte
- * against LSS hard-coded in mrst_devs[] above.
- * DEBUG only.
- */
-static void pmu_scu_firmware_debug(void)
-{
-	struct pci_dev *pdev = NULL;
-
-	for_each_pci_dev(pdev) {
-		struct mrst_device *mrst_dev;
-		u8 pci_config_lss;
-		int pos;
-
-		mrst_dev = pci_id_2_mrst_dev(pdev->device);
-		if (unlikely(!mrst_dev)) {
-			printk(KERN_ERR FW_BUG "pmu: Unknown "
-				"PCI device 0x%04X\n", pdev->device);
-			continue;
-		}
-
-		if (mrst_dev->lss == 0)
-			continue;	 /* no LSS in our table */
-
-		pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
-		if (!pos != 0) {
-			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
-				"missing PCI Vendor Capability\n",
-				pdev->device);
-			continue;
-		}
-		pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
-		if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
-			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
-				"invalid PCI Vendor Capability 0x%x "
-				" expected LSS 0x%X\n",
-				pdev->device, pci_config_lss, mrst_dev->lss);
-			continue;
-		}
-		pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
-
-		if (mrst_dev->lss == pci_config_lss)
-			continue;
-
-		printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
-			pdev->device, pci_config_lss, mrst_dev->lss);
-	}
-}
-
-/**
- * pmu_probe
- */
-static int __devinit pmu_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *pci_id)
-{
-	int ret;
-	struct mrst_pmu_reg *pmu;
-
-	/* Init the device */
-	ret = pci_enable_device(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to Enable PCI device\n");
-		return ret;
-	}
-
-	ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
-		goto out_err1;
-	}
-
-	/* Map the memory of PMU reg base */
-	pmu = pci_iomap(pdev, 0, 0);
-	if (!pmu) {
-		dev_err(&pdev->dev, "Unable to map the PMU address space\n");
-		ret = -ENOMEM;
-		goto out_err2;
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	/* /sys/kernel/debug/mrst_pmu */
-	(void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
-				NULL, NULL, &devices_state_operations);
-#endif
-	pmu_reg = pmu;	/* success */
-
-	if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
-		dev_err(&pdev->dev, "Registering isr has failed\n");
-		ret = -1;
-		goto out_err3;
-	}
-
-	pmu_scu_firmware_debug();
-
-	pmu_write_wkc(S0I3_WAKE_SOURCES);	/* Enable S0i3 wakeup sources */
-
-	pmu_wait_ready();
-
-	pmu_write_ssc(D0I1_ACG_SSS_TARGET);	/* Enable Auto-Clock_Gating */
-	pmu_write_cmd(0x201);
-
-	spin_lock_init(&mrst_pmu_power_state_lock);
-
-	/* Enable the hardware interrupt */
-	pmu_irq_enable();
-	return 0;
-
-out_err3:
-	free_irq(pdev->irq, NULL);
-	pci_iounmap(pdev, pmu_reg);
-	pmu_reg = NULL;
-out_err2:
-	pci_release_region(pdev, 0);
-out_err1:
-	pci_disable_device(pdev);
-	return ret;
-}
-
-static void __devexit pmu_remove(struct pci_dev *pdev)
-{
-	dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
-
-	/* Freeing up the irq */
-	free_irq(pdev->irq, NULL);
-
-	pci_iounmap(pdev, pmu_reg);
-	pmu_reg = NULL;
-
-	/* disable the current PCI device */
-	pci_release_region(pdev, 0);
-	pci_disable_device(pdev);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
-	{ PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
-
-static struct pci_driver driver = {
-	.name = MRST_PMU_DRV_NAME,
-	.id_table = pmu_pci_ids,
-	.probe = pmu_probe,
-	.remove = __devexit_p(pmu_remove),
-};
-
-/**
- * pmu_pci_register - register the PMU driver as PCI device
- */
-static int __init pmu_pci_register(void)
-{
-	return pci_register_driver(&driver);
-}
-
-/* Register and probe via fs_initcall() to preceed device_initcall() */
-fs_initcall(pmu_pci_register);
-
-static void __exit mid_pci_cleanup(void)
-{
-	pci_unregister_driver(&driver);
-}
-
-static int ia_major;
-static int ia_minor;
-
-static int pmu_sfi_parse_oem(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-
-	sb = (struct sfi_table_simple *)table;
-	ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
-	ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
-	printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
-		ia_major, ia_minor);
-
-	return 0;
-}
-
-static int __init scu_fw_check(void)
-{
-	int ret;
-	u32 fw_version;
-
-	if (!pmu_reg)
-		return 0;	/* this driver didn't probe-out */
-
-	sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
-
-	if (ia_major < 0x6005 || ia_minor < 0x1525) {
-		WARN(1, "mrst_pmu: IA FW version too old\n");
-		return -1;
-	}
-
-	ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
-					&fw_version, 1);
-
-	if (ret) {
-		WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
-	} else {
-		int scu_major = (fw_version >> 8) & 0xFF;
-		int scu_minor = (fw_version >> 0) & 0xFF;
-
-		printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
-
-		if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
-			printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
-			mrst_pmu_s0i3_enable = true;
-		} else {
-			WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
-					scu_major, scu_minor);
-		}
-	}
-	return 0;
-}
-late_initcall(scu_fw_check);
-module_exit(mid_pci_cleanup);
diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h
deleted file mode 100644
index bfbfe64..0000000
--- a/arch/x86/platform/mrst/pmu.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c
- *
- * Copyright (c) 2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _MRST_PMU_H_
-#define _MRST_PMU_H_
-
-#define PCI_DEV_ID_MRST_PMU		0x0810
-#define MRST_PMU_DRV_NAME		"mrst_pmu"
-#define	PCI_SUB_CLASS_MASK		0xFF00
-
-#define	PCI_VENDOR_CAP_LOG_ID_MASK	0x7F
-#define PCI_VENDOR_CAP_LOG_SS_MASK	0x80
-
-#define SUB_SYS_ALL_D0I1	0x01155555
-#define S0I3_WAKE_SOURCES	0x00001FFF
-
-#define PM_S0I3_COMMAND					\
-	((0 << 31) |	/* Reserved */			\
-	(0 << 30) |	/* Core must be idle */		\
-	(0xc2 << 22) |	/* ACK C6 trigger */		\
-	(3 << 19) |	/* Trigger on DMI message */	\
-	(3 << 16) |	/* Enter S0i3 */		\
-	(0 << 13) |	/* Numeric mode ID (sw) */	\
-	(3 << 9) |	/* Trigger mode */		\
-	(0 << 8) |	/* Do not interrupt */		\
-	(1 << 0))	/* Set configuration */
-
-#define	LSS_DMI		0
-#define	LSS_SD_HC0	1
-#define	LSS_SD_HC1	2
-#define	LSS_NAND	3
-#define	LSS_IMAGING	4
-#define	LSS_SECURITY	5
-#define	LSS_DISPLAY	6
-#define	LSS_USB_HC	7
-#define	LSS_USB_OTG	8
-#define	LSS_AUDIO	9
-#define	LSS_AUDIO_LPE	9
-#define	LSS_AUDIO_SSP	9
-#define	LSS_I2C0	10
-#define	LSS_I2C1	10
-#define	LSS_I2C2	10
-#define	LSS_KBD		10
-#define	LSS_SPI0	10
-#define	LSS_SPI1	10
-#define	LSS_SPI2	10
-#define	LSS_GPIO	10
-#define	LSS_SRAM	11	/* used by SCU, do not touch */
-#define	LSS_SD_HC2	12
-/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */
-#define MRST_NUM_LSS	13
-
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-
-#define	SSMSK(mask, lss) ((mask) << ((lss) * 2))
-#define	D0	0
-#define	D0i1	1
-#define	D0i2	2
-#define	D0i3	3
-
-#define S0I3_SSS_TARGET	(		\
-	SSMSK(D0i1, LSS_DMI) |		\
-	SSMSK(D0i3, LSS_SD_HC0) |	\
-	SSMSK(D0i3, LSS_SD_HC1) |	\
-	SSMSK(D0i3, LSS_NAND) |		\
-	SSMSK(D0i3, LSS_SD_HC2) |	\
-	SSMSK(D0i3, LSS_IMAGING) |	\
-	SSMSK(D0i3, LSS_SECURITY) |	\
-	SSMSK(D0i3, LSS_DISPLAY) |	\
-	SSMSK(D0i3, LSS_USB_HC) |	\
-	SSMSK(D0i3, LSS_USB_OTG) |	\
-	SSMSK(D0i3, LSS_AUDIO) |	\
-	SSMSK(D0i1, LSS_I2C0))
-
-/*
- * D0i1 on Langwell is Autonomous Clock Gating (ACG).
- * Enable ACG on every LSS except camera and audio
- */
-#define D0I1_ACG_SSS_TARGET	 \
-	(SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO))
-
-enum cm_mode {
-	CM_NOP,			/* ignore the config mode value */
-	CM_IMMEDIATE,
-	CM_DELAY,
-	CM_TRIGGER,
-	CM_INVALID
-};
-
-enum sys_state {
-	SYS_STATE_S0I0,
-	SYS_STATE_S0I1,
-	SYS_STATE_S0I2,
-	SYS_STATE_S0I3,
-	SYS_STATE_S3,
-	SYS_STATE_S5
-};
-
-#define SET_CFG_CMD	1
-
-enum int_status {
-	INT_SPURIOUS = 0,
-	INT_CMD_DONE = 1,
-	INT_CMD_ERR = 2,
-	INT_WAKE_RX = 3,
-	INT_SS_ERROR = 4,
-	INT_S0IX_MISS = 5,
-	INT_NO_ACKC6 = 6,
-	INT_INVALID = 7,
-};
-
-/* PMU register interface */
-static struct mrst_pmu_reg {
-	u32 pm_sts;		/* 0x00 */
-	u32 pm_cmd;		/* 0x04 */
-	u32 pm_ics;		/* 0x08 */
-	u32 _resv1;		/* 0x0C */
-	u32 pm_wkc[2];		/* 0x10 */
-	u32 pm_wks[2];		/* 0x18 */
-	u32 pm_ssc[4];		/* 0x20 */
-	u32 pm_sss[4];		/* 0x30 */
-	u32 pm_wssc[4];		/* 0x40 */
-	u32 pm_c3c4;		/* 0x50 */
-	u32 pm_c5c6;		/* 0x54 */
-	u32 pm_msi_disable;	/* 0x58 */
-} *pmu_reg;
-
-static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); }
-static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); }
-static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); }
-static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); }
-
-static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); }
-static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); }
-static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); }
-static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); }
-static inline void pmu_write_wssc(u32 arg)
-					{ writel(arg, &pmu_reg->pm_wssc[0]); }
-
-static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); }
-static inline u32 pmu_msi_is_disabled(void)
-				{ return readl(&pmu_reg->pm_msi_disable); }
-
-union pmu_pm_ics {
-	struct {
-		u32 cause:8;
-		u32 enable:1;
-		u32 pending:1;
-		u32 reserved:22;
-	} bits;
-	u32 value;
-};
-
-static inline void pmu_irq_enable(void)
-{
-	union pmu_pm_ics pmu_ics;
-
-	pmu_ics.value = pmu_read_ics();
-	pmu_ics.bits.enable = 1;
-	pmu_write_ics(pmu_ics.value);
-}
-
-union pmu_pm_status {
-	struct {
-		u32 pmu_rev:8;
-		u32 pmu_busy:1;
-		u32 mode_id:4;
-		u32 Reserved:19;
-	} pmu_status_parts;
-	u32 pmu_status_value;
-};
-
-static inline int pmu_read_busy_status(void)
-{
-	union pmu_pm_status result;
-
-	result.pmu_status_value = pmu_read_sts();
-
-	return result.pmu_status_parts.pmu_busy;
-}
-
-/* pmu set config parameters */
-struct cfg_delay_param_t {
-	u32 cmd:8;
-	u32 ioc:1;
-	u32 cfg_mode:4;
-	u32 mode_id:3;
-	u32 sys_state:3;
-	u32 cfg_delay:8;
-	u32 rsvd:5;
-};
-
-struct cfg_trig_param_t {
-	u32 cmd:8;
-	u32 ioc:1;
-	u32 cfg_mode:4;
-	u32 mode_id:3;
-	u32 sys_state:3;
-	u32 cfg_trig_type:3;
-	u32 cfg_trig_val:8;
-	u32 cmbi:1;
-	u32 rsvd1:1;
-};
-
-union pmu_pm_set_cfg_cmd_t {
-	union {
-		struct cfg_delay_param_t d_param;
-		struct cfg_trig_param_t t_param;
-	} pmu2_params;
-	u32 pmu_pm_set_cfg_cmd_value;
-};
-
-#ifdef FUTURE_PATCH
-extern int mrst_s0i3_entry(u32 regval, u32 *regaddr);
-#else
-static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; }
-#endif
-#endif