Merge branch 'move-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq

* 'move-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Move x86 drivers to drivers/cpufreq/

27 files changed, 1 insertions, 10551 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cc6c53a..e7f94a5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1848,7 +1848,7 @@ config APM_ALLOW_INTS
 
 endif # APM
 
-source "arch/x86/kernel/cpu/cpufreq/Kconfig"
+source "drivers/cpufreq/Kconfig"
 
 source "drivers/cpuidle/Kconfig"
 
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3f0ebe4..6042981 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
 
 obj-$(CONFIG_X86_MCE)			+= mcheck/
 obj-$(CONFIG_MTRR)			+= mtrr/
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq/
 
 obj-$(CONFIG_X86_LOCAL_APIC)		+= perfctr-watchdog.o
 
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
deleted file mode 100644
index 870e6cc..0000000
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ /dev/null
@@ -1,266 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config X86_PCC_CPUFREQ
-	tristate "Processor Clocking Control interface driver"
-	depends on ACPI && ACPI_PROCESSOR
-	help
-	  This driver adds support for the PCC interface.
-
-	  For details, take a look at:
-	  <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pcc-cpufreq.
-
-	  If in doubt, say N.
-
-config X86_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This driver adds a CPUFreq driver which utilizes the ACPI
-	  Processor Performance States.
-	  This driver also supports Intel Enhanced Speedstep.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acpi-cpufreq.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config ELAN_CPUFREQ
-	tristate "AMD Elan SC400 and SC410"
-	select CPU_FREQ_TABLE
-	depends on X86_ELAN
-	---help---
-	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
-	  processors.
-
-	  You need to specify the processor maximum speed as boot
-	  parameter: elanfreq=maxspeed (in kHz) or as module
-	  parameter "max_freq".
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config SC520_CPUFREQ
-	tristate "AMD Elan SC520"
-	select CPU_FREQ_TABLE
-	depends on X86_ELAN
-	---help---
-	  This adds the CPUFreq driver for AMD Elan SC520 processor.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-
-config X86_POWERNOW_K6
-	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
-	select CPU_FREQ_TABLE
-	depends on X86_32
-	help
-	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
-	  AMD K6-3+ processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_POWERNOW_K7
-	tristate "AMD Mobile Athlon/Duron PowerNow!"
-	select CPU_FREQ_TABLE
-	depends on X86_32
-	help
-	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_POWERNOW_K7_ACPI
-	bool
-	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
-	depends on X86_32
-	default y
-
-config X86_POWERNOW_K8
-	tristate "AMD Opteron/Athlon64 PowerNow!"
-	select CPU_FREQ_TABLE
-	depends on ACPI && ACPI_PROCESSOR
-	help
-	  This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powernow-k8.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-config X86_GX_SUSPMOD
-	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
-	depends on X86_32 && PCI
-	help
-	 This add the CPUFreq driver for NatSemi Geode processors which
-	 support suspend modulation.
-
-	 For details, take a look at <file:Documentation/cpu-freq/>.
-
-	 If in doubt, say N.
-
-config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep (deprecated)"
-	select CPU_FREQ_TABLE
-	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
-	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
-	help
-	  This is deprecated and this functionality is now merged into
-	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
-	  speedstep_centrino.
-	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
-	  or 64bit enabled Intel Xeons.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called speedstep-centrino.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_SPEEDSTEP_CENTRINO_TABLE
-	bool "Built-in tables for Banias CPUs"
-	depends on X86_32 && X86_SPEEDSTEP_CENTRINO
-	default y
-	help
-	  Use built-in tables for Banias CPUs if ACPI encoding
-	  is not available.
-
-	  If in doubt, say N.
-
-config X86_SPEEDSTEP_ICH
-	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
-	select CPU_FREQ_TABLE
-	depends on X86_32
-	help
-	  This adds the CPUFreq driver for certain mobile Intel Pentium III
-	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
-	  mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2,
-	  ICH3 or ICH4 southbridge.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_SPEEDSTEP_SMI
-	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
-	select CPU_FREQ_TABLE
-	depends on X86_32 && EXPERIMENTAL
-	help
-	  This adds the CPUFreq driver for certain mobile Intel Pentium III
-	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)
-	  on systems which have an Intel 440BX/ZX/MX southbridge.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_P4_CLOCKMOD
-	tristate "Intel Pentium 4 clock modulation"
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
-	  processors.  When enabled it will lower CPU temperature by skipping
-	  clocks.
-
-	  This driver should be only used in exceptional
-	  circumstances when very low power is needed because it causes severe
-	  slowdowns and noticeable latencies.  Normally Speedstep should be used
-	  instead.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called p4-clockmod.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  Unless you are absolutely sure say N.
-
-config X86_CPUFREQ_NFORCE2
-	tristate "nVidia nForce2 FSB changing"
-	depends on X86_32 && EXPERIMENTAL
-	help
-	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
-	  platforms.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_LONGRUN
-	tristate "Transmeta LongRun"
-	depends on X86_32
-	help
-	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
-	  which support LongRun.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_LONGHAUL
-	tristate "VIA Cyrix III Longhaul"
-	select CPU_FREQ_TABLE
-	depends on X86_32 && ACPI_PROCESSOR
-	help
-	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
-	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
-	  processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_E_POWERSAVER
-	tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
-	select CPU_FREQ_TABLE
-	depends on X86_32 && EXPERIMENTAL
-	help
-	  This adds the CPUFreq driver for VIA C7 processors.  However, this driver
-	  does not have any safeguards to prevent operating the CPU out of spec
-	  and is thus considered dangerous.  Please use the regular ACPI cpufreq
-	  driver, enabled by CONFIG_X86_ACPI_CPUFREQ.
-
-	  If in doubt, say N.
-
-comment "shared options"
-
-config X86_SPEEDSTEP_LIB
-	tristate
-	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
-
-config X86_SPEEDSTEP_RELAXED_CAP_CHECK
-	bool "Relaxed speedstep capability checks"
-	depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
-	help
-	  Don't perform all checks for a speedstep capable system which would
-	  normally be done. Some ancient or strange systems, though speedstep
-	  capable, don't always indicate that they are speedstep capable. This
-	  option lets the probing code bypass some of those checks if the
-	  parameter "relaxed_check=1" is passed to the module.
-
-endif	# CPU_FREQ
-
-endmenu
diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
deleted file mode 100644
index bd54bf6..0000000
--- a/arch/x86/kernel/cpu/cpufreq/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
-# K8 systems. ACPI is preferred to all other hardware-specific drivers.
-# speedstep-* is preferred over p4-clockmod.
-
-obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o mperf.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o mperf.o
-obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
-obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
-obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
-obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
-obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
-obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
-obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
-obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
-obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
-obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
-obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
-obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
-obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
deleted file mode 100644
index 4e04e12..0000000
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ /dev/null
@@ -1,773 +0,0 @@
-/*
- * acpi-cpufreq.c - ACPI Processor P-States Driver
- *
- *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *  Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
- *  Copyright (C) 2006       Denis Sadykov <denis.m.sadykov@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/sched.h>
-#include <linux/cpufreq.h>
-#include <linux/compiler.h>
-#include <linux/dmi.h>
-#include <linux/slab.h>
-
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-
-#include <acpi/processor.h>
-
-#include <asm/msr.h>
-#include <asm/processor.h>
-#include <asm/cpufeature.h>
-#include "mperf.h"
-
-MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
-MODULE_DESCRIPTION("ACPI Processor P-States Driver");
-MODULE_LICENSE("GPL");
-
-enum {
-	UNDEFINED_CAPABLE = 0,
-	SYSTEM_INTEL_MSR_CAPABLE,
-	SYSTEM_IO_CAPABLE,
-};
-
-#define INTEL_MSR_RANGE		(0xffff)
-
-struct acpi_cpufreq_data {
-	struct acpi_processor_performance *acpi_data;
-	struct cpufreq_frequency_table *freq_table;
-	unsigned int resume;
-	unsigned int cpu_feature;
-};
-
-static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data);
-
-/* acpi_perf_data is a pointer to percpu data. */
-static struct acpi_processor_performance __percpu *acpi_perf_data;
-
-static struct cpufreq_driver acpi_cpufreq_driver;
-
-static unsigned int acpi_pstate_strict;
-
-static int check_est_cpu(unsigned int cpuid)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
-
-	return cpu_has(cpu, X86_FEATURE_EST);
-}
-
-static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
-{
-	struct acpi_processor_performance *perf;
-	int i;
-
-	perf = data->acpi_data;
-
-	for (i = 0; i < perf->state_count; i++) {
-		if (value == perf->states[i].status)
-			return data->freq_table[i].frequency;
-	}
-	return 0;
-}
-
-static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
-{
-	int i;
-	struct acpi_processor_performance *perf;
-
-	msr &= INTEL_MSR_RANGE;
-	perf = data->acpi_data;
-
-	for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == perf->states[data->freq_table[i].index].status)
-			return data->freq_table[i].frequency;
-	}
-	return data->freq_table[0].frequency;
-}
-
-static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
-{
-	switch (data->cpu_feature) {
-	case SYSTEM_INTEL_MSR_CAPABLE:
-		return extract_msr(val, data);
-	case SYSTEM_IO_CAPABLE:
-		return extract_io(val, data);
-	default:
-		return 0;
-	}
-}
-
-struct msr_addr {
-	u32 reg;
-};
-
-struct io_addr {
-	u16 port;
-	u8 bit_width;
-};
-
-struct drv_cmd {
-	unsigned int type;
-	const struct cpumask *mask;
-	union {
-		struct msr_addr msr;
-		struct io_addr io;
-	} addr;
-	u32 val;
-};
-
-/* Called via smp_call_function_single(), on the target CPU */
-static void do_drv_read(void *_cmd)
-{
-	struct drv_cmd *cmd = _cmd;
-	u32 h;
-
-	switch (cmd->type) {
-	case SYSTEM_INTEL_MSR_CAPABLE:
-		rdmsr(cmd->addr.msr.reg, cmd->val, h);
-		break;
-	case SYSTEM_IO_CAPABLE:
-		acpi_os_read_port((acpi_io_address)cmd->addr.io.port,
-				&cmd->val,
-				(u32)cmd->addr.io.bit_width);
-		break;
-	default:
-		break;
-	}
-}
-
-/* Called via smp_call_function_many(), on the target CPUs */
-static void do_drv_write(void *_cmd)
-{
-	struct drv_cmd *cmd = _cmd;
-	u32 lo, hi;
-
-	switch (cmd->type) {
-	case SYSTEM_INTEL_MSR_CAPABLE:
-		rdmsr(cmd->addr.msr.reg, lo, hi);
-		lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE);
-		wrmsr(cmd->addr.msr.reg, lo, hi);
-		break;
-	case SYSTEM_IO_CAPABLE:
-		acpi_os_write_port((acpi_io_address)cmd->addr.io.port,
-				cmd->val,
-				(u32)cmd->addr.io.bit_width);
-		break;
-	default:
-		break;
-	}
-}
-
-static void drv_read(struct drv_cmd *cmd)
-{
-	int err;
-	cmd->val = 0;
-
-	err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1);
-	WARN_ON_ONCE(err);	/* smp_call_function_any() was buggy? */
-}
-
-static void drv_write(struct drv_cmd *cmd)
-{
-	int this_cpu;
-
-	this_cpu = get_cpu();
-	if (cpumask_test_cpu(this_cpu, cmd->mask))
-		do_drv_write(cmd);
-	smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
-	put_cpu();
-}
-
-static u32 get_cur_val(const struct cpumask *mask)
-{
-	struct acpi_processor_performance *perf;
-	struct drv_cmd cmd;
-
-	if (unlikely(cpumask_empty(mask)))
-		return 0;
-
-	switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) {
-	case SYSTEM_INTEL_MSR_CAPABLE:
-		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
-		cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
-		break;
-	case SYSTEM_IO_CAPABLE:
-		cmd.type = SYSTEM_IO_CAPABLE;
-		perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data;
-		cmd.addr.io.port = perf->control_register.address;
-		cmd.addr.io.bit_width = perf->control_register.bit_width;
-		break;
-	default:
-		return 0;
-	}
-
-	cmd.mask = mask;
-	drv_read(&cmd);
-
-	pr_debug("get_cur_val = %u\n", cmd.val);
-
-	return cmd.val;
-}
-
-static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
-{
-	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu);
-	unsigned int freq;
-	unsigned int cached_freq;
-
-	pr_debug("get_cur_freq_on_cpu (%d)\n", cpu);
-
-	if (unlikely(data == NULL ||
-		     data->acpi_data == NULL || data->freq_table == NULL)) {
-		return 0;
-	}
-
-	cached_freq = data->freq_table[data->acpi_data->state].frequency;
-	freq = extract_freq(get_cur_val(cpumask_of(cpu)), data);
-	if (freq != cached_freq) {
-		/*
-		 * The dreaded BIOS frequency change behind our back.
-		 * Force set the frequency on next target call.
-		 */
-		data->resume = 1;
-	}
-
-	pr_debug("cur freq = %u\n", freq);
-
-	return freq;
-}
-
-static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
-				struct acpi_cpufreq_data *data)
-{
-	unsigned int cur_freq;
-	unsigned int i;
-
-	for (i = 0; i < 100; i++) {
-		cur_freq = extract_freq(get_cur_val(mask), data);
-		if (cur_freq == freq)
-			return 1;
-		udelay(10);
-	}
-	return 0;
-}
-
-static int acpi_cpufreq_target(struct cpufreq_policy *policy,
-			       unsigned int target_freq, unsigned int relation)
-{
-	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
-	struct acpi_processor_performance *perf;
-	struct cpufreq_freqs freqs;
-	struct drv_cmd cmd;
-	unsigned int next_state = 0; /* Index into freq_table */
-	unsigned int next_perf_state = 0; /* Index into perf table */
-	unsigned int i;
-	int result = 0;
-
-	pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
-
-	if (unlikely(data == NULL ||
-	     data->acpi_data == NULL || data->freq_table == NULL)) {
-		return -ENODEV;
-	}
-
-	perf = data->acpi_data;
-	result = cpufreq_frequency_table_target(policy,
-						data->freq_table,
-						target_freq,
-						relation, &next_state);
-	if (unlikely(result)) {
-		result = -ENODEV;
-		goto out;
-	}
-
-	next_perf_state = data->freq_table[next_state].index;
-	if (perf->state == next_perf_state) {
-		if (unlikely(data->resume)) {
-			pr_debug("Called after resume, resetting to P%d\n",
-				next_perf_state);
-			data->resume = 0;
-		} else {
-			pr_debug("Already at target state (P%d)\n",
-				next_perf_state);
-			goto out;
-		}
-	}
-
-	switch (data->cpu_feature) {
-	case SYSTEM_INTEL_MSR_CAPABLE:
-		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
-		cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
-		cmd.val = (u32) perf->states[next_perf_state].control;
-		break;
-	case SYSTEM_IO_CAPABLE:
-		cmd.type = SYSTEM_IO_CAPABLE;
-		cmd.addr.io.port = perf->control_register.address;
-		cmd.addr.io.bit_width = perf->control_register.bit_width;
-		cmd.val = (u32) perf->states[next_perf_state].control;
-		break;
-	default:
-		result = -ENODEV;
-		goto out;
-	}
-
-	/* cpufreq holds the hotplug lock, so we are safe from here on */
-	if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
-		cmd.mask = policy->cpus;
-	else
-		cmd.mask = cpumask_of(policy->cpu);
-
-	freqs.old = perf->states[perf->state].core_frequency * 1000;
-	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
-
-	drv_write(&cmd);
-
-	if (acpi_pstate_strict) {
-		if (!check_freqs(cmd.mask, freqs.new, data)) {
-			pr_debug("acpi_cpufreq_target failed (%d)\n",
-				policy->cpu);
-			result = -EAGAIN;
-			goto out;
-		}
-	}
-
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-	perf->state = next_perf_state;
-
-out:
-	return result;
-}
-
-static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
-
-	pr_debug("acpi_cpufreq_verify\n");
-
-	return cpufreq_frequency_table_verify(policy, data->freq_table);
-}
-
-static unsigned long
-acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
-{
-	struct acpi_processor_performance *perf = data->acpi_data;
-
-	if (cpu_khz) {
-		/* search the closest match to cpu_khz */
-		unsigned int i;
-		unsigned long freq;
-		unsigned long freqn = perf->states[0].core_frequency * 1000;
-
-		for (i = 0; i < (perf->state_count-1); i++) {
-			freq = freqn;
-			freqn = perf->states[i+1].core_frequency * 1000;
-			if ((2 * cpu_khz) > (freqn + freq)) {
-				perf->state = i;
-				return freq;
-			}
-		}
-		perf->state = perf->state_count-1;
-		return freqn;
-	} else {
-		/* assume CPU is at P0... */
-		perf->state = 0;
-		return perf->states[0].core_frequency * 1000;
-	}
-}
-
-static void free_acpi_perf_data(void)
-{
-	unsigned int i;
-
-	/* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */
-	for_each_possible_cpu(i)
-		free_cpumask_var(per_cpu_ptr(acpi_perf_data, i)
-				 ->shared_cpu_map);
-	free_percpu(acpi_perf_data);
-}
-
-/*
- * acpi_cpufreq_early_init - initialize ACPI P-States library
- *
- * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c)
- * in order to determine correct frequency and voltage pairings. We can
- * do _PDC and _PSD and find out the processor dependency for the
- * actual init that will happen later...
- */
-static int __init acpi_cpufreq_early_init(void)
-{
-	unsigned int i;
-	pr_debug("acpi_cpufreq_early_init\n");
-
-	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
-	if (!acpi_perf_data) {
-		pr_debug("Memory allocation error for acpi_perf_data.\n");
-		return -ENOMEM;
-	}
-	for_each_possible_cpu(i) {
-		if (!zalloc_cpumask_var_node(
-			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
-			GFP_KERNEL, cpu_to_node(i))) {
-
-			/* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
-			free_acpi_perf_data();
-			return -ENOMEM;
-		}
-	}
-
-	/* Do initialization in ACPI core */
-	acpi_processor_preregister_performance(acpi_perf_data);
-	return 0;
-}
-
-#ifdef CONFIG_SMP
-/*
- * Some BIOSes do SW_ANY coordination internally, either set it up in hw
- * or do it in BIOS firmware and won't inform about it to OS. If not
- * detected, this has a side effect of making CPU run at a different speed
- * than OS intended it to run at. Detect it and handle it cleanly.
- */
-static int bios_with_sw_any_bug;
-
-static int sw_any_bug_found(const struct dmi_system_id *d)
-{
-	bios_with_sw_any_bug = 1;
-	return 0;
-}
-
-static const struct dmi_system_id sw_any_bug_dmi_table[] = {
-	{
-		.callback = sw_any_bug_found,
-		.ident = "Supermicro Server X6DLP",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
-			DMI_MATCH(DMI_BIOS_VERSION, "080010"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
-		},
-	},
-	{ }
-};
-
-static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
-{
-	/* Intel Xeon Processor 7100 Series Specification Update
-	 * http://www.intel.com/Assets/PDF/specupdate/314554.pdf
-	 * AL30: A Machine Check Exception (MCE) Occurring during an
-	 * Enhanced Intel SpeedStep Technology Ratio Change May Cause
-	 * Both Processor Cores to Lock Up. */
-	if (c->x86_vendor == X86_VENDOR_INTEL) {
-		if ((c->x86 == 15) &&
-		    (c->x86_model == 6) &&
-		    (c->x86_mask == 8)) {
-			printk(KERN_INFO "acpi-cpufreq: Intel(R) "
-			    "Xeon(R) 7100 Errata AL30, processors may "
-			    "lock up on frequency changes: disabling "
-			    "acpi-cpufreq.\n");
-			return -ENODEV;
-		    }
-		}
-	return 0;
-}
-#endif
-
-static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int i;
-	unsigned int valid_states = 0;
-	unsigned int cpu = policy->cpu;
-	struct acpi_cpufreq_data *data;
-	unsigned int result = 0;
-	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
-	struct acpi_processor_performance *perf;
-#ifdef CONFIG_SMP
-	static int blacklisted;
-#endif
-
-	pr_debug("acpi_cpufreq_cpu_init\n");
-
-#ifdef CONFIG_SMP
-	if (blacklisted)
-		return blacklisted;
-	blacklisted = acpi_cpufreq_blacklist(c);
-	if (blacklisted)
-		return blacklisted;
-#endif
-
-	data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu);
-	per_cpu(acfreq_data, cpu) = data;
-
-	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
-		acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
-
-	result = acpi_processor_register_performance(data->acpi_data, cpu);
-	if (result)
-		goto err_free;
-
-	perf = data->acpi_data;
-	policy->shared_type = perf->shared_type;
-
-	/*
-	 * Will let policy->cpus know about dependency only when software
-	 * coordination is required.
-	 */
-	if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
-	    policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
-		cpumask_copy(policy->cpus, perf->shared_cpu_map);
-	}
-	cpumask_copy(policy->related_cpus, perf->shared_cpu_map);
-
-#ifdef CONFIG_SMP
-	dmi_check_system(sw_any_bug_dmi_table);
-	if (bios_with_sw_any_bug && cpumask_weight(policy->cpus) == 1) {
-		policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-		cpumask_copy(policy->cpus, cpu_core_mask(cpu));
-	}
-#endif
-
-	/* capability check */
-	if (perf->state_count <= 1) {
-		pr_debug("No P-States\n");
-		result = -ENODEV;
-		goto err_unreg;
-	}
-
-	if (perf->control_register.space_id != perf->status_register.space_id) {
-		result = -ENODEV;
-		goto err_unreg;
-	}
-
-	switch (perf->control_register.space_id) {
-	case ACPI_ADR_SPACE_SYSTEM_IO:
-		pr_debug("SYSTEM IO addr space\n");
-		data->cpu_feature = SYSTEM_IO_CAPABLE;
-		break;
-	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		pr_debug("HARDWARE addr space\n");
-		if (!check_est_cpu(cpu)) {
-			result = -ENODEV;
-			goto err_unreg;
-		}
-		data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
-		break;
-	default:
-		pr_debug("Unknown addr space %d\n",
-			(u32) (perf->control_register.space_id));
-		result = -ENODEV;
-		goto err_unreg;
-	}
-
-	data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
-		    (perf->state_count+1), GFP_KERNEL);
-	if (!data->freq_table) {
-		result = -ENOMEM;
-		goto err_unreg;
-	}
-
-	/* detect transition latency */
-	policy->cpuinfo.transition_latency = 0;
-	for (i = 0; i < perf->state_count; i++) {
-		if ((perf->states[i].transition_latency * 1000) >
-		    policy->cpuinfo.transition_latency)
-			policy->cpuinfo.transition_latency =
-			    perf->states[i].transition_latency * 1000;
-	}
-
-	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
-	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
-	    policy->cpuinfo.transition_latency > 20 * 1000) {
-		policy->cpuinfo.transition_latency = 20 * 1000;
-		printk_once(KERN_INFO
-			    "P-state transition latency capped at 20 uS\n");
-	}
-
-	/* table init */
-	for (i = 0; i < perf->state_count; i++) {
-		if (i > 0 && perf->states[i].core_frequency >=
-		    data->freq_table[valid_states-1].frequency / 1000)
-			continue;
-
-		data->freq_table[valid_states].index = i;
-		data->freq_table[valid_states].frequency =
-		    perf->states[i].core_frequency * 1000;
-		valid_states++;
-	}
-	data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
-	perf->state = 0;
-
-	result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
-	if (result)
-		goto err_freqfree;
-
-	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
-		printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
-
-	switch (perf->control_register.space_id) {
-	case ACPI_ADR_SPACE_SYSTEM_IO:
-		/* Current speed is unknown and not detectable by IO port */
-		policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
-		break;
-	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
-		policy->cur = get_cur_freq_on_cpu(cpu);
-		break;
-	default:
-		break;
-	}
-
-	/* notify BIOS that we exist */
-	acpi_processor_notify_smm(THIS_MODULE);
-
-	/* Check for APERF/MPERF support in hardware */
-	if (cpu_has(c, X86_FEATURE_APERFMPERF))
-		acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf;
-
-	pr_debug("CPU%u - ACPI performance management activated.\n", cpu);
-	for (i = 0; i < perf->state_count; i++)
-		pr_debug("     %cP%d: %d MHz, %d mW, %d uS\n",
-			(i == perf->state ? '*' : ' '), i,
-			(u32) perf->states[i].core_frequency,
-			(u32) perf->states[i].power,
-			(u32) perf->states[i].transition_latency);
-
-	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
-
-	/*
-	 * the first call to ->target() should result in us actually
-	 * writing something to the appropriate registers.
-	 */
-	data->resume = 1;
-
-	return result;
-
-err_freqfree:
-	kfree(data->freq_table);
-err_unreg:
-	acpi_processor_unregister_performance(perf, cpu);
-err_free:
-	kfree(data);
-	per_cpu(acfreq_data, cpu) = NULL;
-
-	return result;
-}
-
-static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
-
-	pr_debug("acpi_cpufreq_cpu_exit\n");
-
-	if (data) {
-		cpufreq_frequency_table_put_attr(policy->cpu);
-		per_cpu(acfreq_data, policy->cpu) = NULL;
-		acpi_processor_unregister_performance(data->acpi_data,
-						      policy->cpu);
-		kfree(data->freq_table);
-		kfree(data);
-	}
-
-	return 0;
-}
-
-static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
-
-	pr_debug("acpi_cpufreq_resume\n");
-
-	data->resume = 1;
-
-	return 0;
-}
-
-static struct freq_attr *acpi_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver acpi_cpufreq_driver = {
-	.verify		= acpi_cpufreq_verify,
-	.target		= acpi_cpufreq_target,
-	.bios_limit	= acpi_processor_get_bios_limit,
-	.init		= acpi_cpufreq_cpu_init,
-	.exit		= acpi_cpufreq_cpu_exit,
-	.resume		= acpi_cpufreq_resume,
-	.name		= "acpi-cpufreq",
-	.owner		= THIS_MODULE,
-	.attr		= acpi_cpufreq_attr,
-};
-
-static int __init acpi_cpufreq_init(void)
-{
-	int ret;
-
-	if (acpi_disabled)
-		return 0;
-
-	pr_debug("acpi_cpufreq_init\n");
-
-	ret = acpi_cpufreq_early_init();
-	if (ret)
-		return ret;
-
-	ret = cpufreq_register_driver(&acpi_cpufreq_driver);
-	if (ret)
-		free_acpi_perf_data();
-
-	return ret;
-}
-
-static void __exit acpi_cpufreq_exit(void)
-{
-	pr_debug("acpi_cpufreq_exit\n");
-
-	cpufreq_unregister_driver(&acpi_cpufreq_driver);
-
-	free_percpu(acpi_perf_data);
-}
-
-module_param(acpi_pstate_strict, uint, 0644);
-MODULE_PARM_DESC(acpi_pstate_strict,
-	"value 0 or non-zero. non-zero -> strict ACPI checks are "
-	"performed during frequency changes.");
-
-late_initcall(acpi_cpufreq_init);
-module_exit(acpi_cpufreq_exit);
-
-MODULE_ALIAS("acpi");
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
deleted file mode 100644
index 7bac808..0000000
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * (C) 2004-2006  Sebastian Witt <se.witt@gmx.net>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *  Based upon reverse engineered information
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#define NFORCE2_XTAL 25
-#define NFORCE2_BOOTFSB 0x48
-#define NFORCE2_PLLENABLE 0xa8
-#define NFORCE2_PLLREG 0xa4
-#define NFORCE2_PLLADR 0xa0
-#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
-
-#define NFORCE2_MIN_FSB 50
-#define NFORCE2_SAFE_DISTANCE 50
-
-/* Delay in ms between FSB changes */
-/* #define NFORCE2_DELAY 10 */
-
-/*
- * nforce2_chipset:
- * FSB is changed using the chipset
- */
-static struct pci_dev *nforce2_dev;
-
-/* fid:
- * multiplier * 10
- */
-static int fid;
-
-/* min_fsb, max_fsb:
- * minimum and maximum FSB (= FSB at boot time)
- */
-static int min_fsb;
-static int max_fsb;
-
-MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
-MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
-MODULE_LICENSE("GPL");
-
-module_param(fid, int, 0444);
-module_param(min_fsb, int, 0444);
-
-MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
-MODULE_PARM_DESC(min_fsb,
-		"Minimum FSB to use, if not defined: current FSB - 50");
-
-#define PFX "cpufreq-nforce2: "
-
-/**
- * nforce2_calc_fsb - calculate FSB
- * @pll: PLL value
- *
- *   Calculates FSB from PLL value
- */
-static int nforce2_calc_fsb(int pll)
-{
-	unsigned char mul, div;
-
-	mul = (pll >> 8) & 0xff;
-	div = pll & 0xff;
-
-	if (div > 0)
-		return NFORCE2_XTAL * mul / div;
-
-	return 0;
-}
-
-/**
- * nforce2_calc_pll - calculate PLL value
- * @fsb: FSB
- *
- *   Calculate PLL value for given FSB
- */
-static int nforce2_calc_pll(unsigned int fsb)
-{
-	unsigned char xmul, xdiv;
-	unsigned char mul = 0, div = 0;
-	int tried = 0;
-
-	/* Try to calculate multiplier and divider up to 4 times */
-	while (((mul == 0) || (div == 0)) && (tried <= 3)) {
-		for (xdiv = 2; xdiv <= 0x80; xdiv++)
-			for (xmul = 1; xmul <= 0xfe; xmul++)
-				if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
-				    fsb + tried) {
-					mul = xmul;
-					div = xdiv;
-				}
-		tried++;
-	}
-
-	if ((mul == 0) || (div == 0))
-		return -1;
-
-	return NFORCE2_PLL(mul, div);
-}
-
-/**
- * nforce2_write_pll - write PLL value to chipset
- * @pll: PLL value
- *
- *   Writes new FSB PLL value to chipset
- */
-static void nforce2_write_pll(int pll)
-{
-	int temp;
-
-	/* Set the pll addr. to 0x00 */
-	pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0);
-
-	/* Now write the value in all 64 registers */
-	for (temp = 0; temp <= 0x3f; temp++)
-		pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll);
-
-	return;
-}
-
-/**
- * nforce2_fsb_read - Read FSB
- *
- *   Read FSB from chipset
- *   If bootfsb != 0, return FSB at boot-time
- */
-static unsigned int nforce2_fsb_read(int bootfsb)
-{
-	struct pci_dev *nforce2_sub5;
-	u32 fsb, temp = 0;
-
-	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
-	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF,
-				PCI_ANY_ID, PCI_ANY_ID, NULL);
-	if (!nforce2_sub5)
-		return 0;
-
-	pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
-	fsb /= 1000000;
-
-	/* Check if PLL register is already set */
-	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
-
-	if (bootfsb || !temp)
-		return fsb;
-
-	/* Use PLL register FSB value */
-	pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp);
-	fsb = nforce2_calc_fsb(temp);
-
-	return fsb;
-}
-
-/**
- * nforce2_set_fsb - set new FSB
- * @fsb: New FSB
- *
- *   Sets new FSB
- */
-static int nforce2_set_fsb(unsigned int fsb)
-{
-	u32 temp = 0;
-	unsigned int tfsb;
-	int diff;
-	int pll = 0;
-
-	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
-		printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
-		return -EINVAL;
-	}
-
-	tfsb = nforce2_fsb_read(0);
-	if (!tfsb) {
-		printk(KERN_ERR PFX "Error while reading the FSB\n");
-		return -EINVAL;
-	}
-
-	/* First write? Then set actual value */
-	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
-	if (!temp) {
-		pll = nforce2_calc_pll(tfsb);
-
-		if (pll < 0)
-			return -EINVAL;
-
-		nforce2_write_pll(pll);
-	}
-
-	/* Enable write access */
-	temp = 0x01;
-	pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp);
-
-	diff = tfsb - fsb;
-
-	if (!diff)
-		return 0;
-
-	while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
-		if (diff < 0)
-			tfsb++;
-		else
-			tfsb--;
-
-		/* Calculate the PLL reg. value */
-		pll = nforce2_calc_pll(tfsb);
-		if (pll == -1)
-			return -EINVAL;
-
-		nforce2_write_pll(pll);
-#ifdef NFORCE2_DELAY
-		mdelay(NFORCE2_DELAY);
-#endif
-	}
-
-	temp = 0x40;
-	pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp);
-
-	return 0;
-}
-
-/**
- * nforce2_get - get the CPU frequency
- * @cpu: CPU number
- *
- * Returns the CPU frequency
- */
-static unsigned int nforce2_get(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-	return nforce2_fsb_read(0) * fid * 100;
-}
-
-/**
- * nforce2_target - set a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * Sets a new CPUFreq policy.
- */
-static int nforce2_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq, unsigned int relation)
-{
-/*        unsigned long         flags; */
-	struct cpufreq_freqs freqs;
-	unsigned int target_fsb;
-
-	if ((target_freq > policy->max) || (target_freq < policy->min))
-		return -EINVAL;
-
-	target_fsb = target_freq / (fid * 100);
-
-	freqs.old = nforce2_get(policy->cpu);
-	freqs.new = target_fsb * fid * 100;
-	freqs.cpu = 0;		/* Only one CPU on nForce2 platforms */
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	pr_debug("Old CPU frequency %d kHz, new %d kHz\n",
-	       freqs.old, freqs.new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Disable IRQs */
-	/* local_irq_save(flags); */
-
-	if (nforce2_set_fsb(target_fsb) < 0)
-		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
-			target_fsb);
-	else
-		pr_debug("Changed FSB successfully to %d\n",
-			target_fsb);
-
-	/* Enable IRQs */
-	/* local_irq_restore(flags); */
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-/**
- * nforce2_verify - verifies a new CPUFreq policy
- * @policy: new policy
- */
-static int nforce2_verify(struct cpufreq_policy *policy)
-{
-	unsigned int fsb_pol_max;
-
-	fsb_pol_max = policy->max / (fid * 100);
-
-	if (policy->min < (fsb_pol_max * fid * 100))
-		policy->max = (fsb_pol_max + 1) * fid * 100;
-
-	cpufreq_verify_within_limits(policy,
-				     policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static int nforce2_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int fsb;
-	unsigned int rfid;
-
-	/* capability check */
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	/* Get current FSB */
-	fsb = nforce2_fsb_read(0);
-
-	if (!fsb)
-		return -EIO;
-
-	/* FIX: Get FID from CPU */
-	if (!fid) {
-		if (!cpu_khz) {
-			printk(KERN_WARNING PFX
-			"cpu_khz not set, can't calculate multiplier!\n");
-			return -ENODEV;
-		}
-
-		fid = cpu_khz / (fsb * 100);
-		rfid = fid % 5;
-
-		if (rfid) {
-			if (rfid > 2)
-				fid += 5 - rfid;
-			else
-				fid -= rfid;
-		}
-	}
-
-	printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
-	       fid / 10, fid % 10);
-
-	/* Set maximum FSB to FSB at boot time */
-	max_fsb = nforce2_fsb_read(1);
-
-	if (!max_fsb)
-		return -EIO;
-
-	if (!min_fsb)
-		min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
-
-	if (min_fsb < NFORCE2_MIN_FSB)
-		min_fsb = NFORCE2_MIN_FSB;
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.min_freq = min_fsb * fid * 100;
-	policy->cpuinfo.max_freq = max_fsb * fid * 100;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	policy->cur = nforce2_get(policy->cpu);
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-
-	return 0;
-}
-
-static int nforce2_cpu_exit(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static struct cpufreq_driver nforce2_driver = {
-	.name = "nforce2",
-	.verify = nforce2_verify,
-	.target = nforce2_target,
-	.get = nforce2_get,
-	.init = nforce2_cpu_init,
-	.exit = nforce2_cpu_exit,
-	.owner = THIS_MODULE,
-};
-
-/**
- * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
- *
- * Detects nForce2 A2 and C1 stepping
- *
- */
-static int nforce2_detect_chipset(void)
-{
-	nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-					PCI_DEVICE_ID_NVIDIA_NFORCE2,
-					PCI_ANY_ID, PCI_ANY_ID, NULL);
-
-	if (nforce2_dev == NULL)
-		return -ENODEV;
-
-	printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
-	       nforce2_dev->revision);
-	printk(KERN_INFO PFX
-	       "FSB changing is maybe unstable and can lead to "
-	       "crashes and data loss.\n");
-
-	return 0;
-}
-
-/**
- * nforce2_init - initializes the nForce2 CPUFreq driver
- *
- * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
- * devices, -EINVAL on problems during initiatization, and zero on
- * success.
- */
-static int __init nforce2_init(void)
-{
-	/* TODO: do we need to detect the processor? */
-
-	/* detect chipset */
-	if (nforce2_detect_chipset()) {
-		printk(KERN_INFO PFX "No nForce2 chipset.\n");
-		return -ENODEV;
-	}
-
-	return cpufreq_register_driver(&nforce2_driver);
-}
-
-/**
- * nforce2_exit - unregisters cpufreq module
- *
- *   Unregisters nForce2 FSB change support.
- */
-static void __exit nforce2_exit(void)
-{
-	cpufreq_unregister_driver(&nforce2_driver);
-}
-
-module_init(nforce2_init);
-module_exit(nforce2_exit);
-
diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
deleted file mode 100644
index 35a257d..0000000
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- *  Based on documentation provided by Dave Jones. Thanks!
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/msr.h>
-#include <asm/tsc.h>
-
-#define EPS_BRAND_C7M	0
-#define EPS_BRAND_C7	1
-#define EPS_BRAND_EDEN	2
-#define EPS_BRAND_C3	3
-#define EPS_BRAND_C7D	4
-
-struct eps_cpu_data {
-	u32 fsb;
-	struct cpufreq_frequency_table freq_table[];
-};
-
-static struct eps_cpu_data *eps_cpu[NR_CPUS];
-
-
-static unsigned int eps_get(unsigned int cpu)
-{
-	struct eps_cpu_data *centaur;
-	u32 lo, hi;
-
-	if (cpu)
-		return 0;
-	centaur = eps_cpu[cpu];
-	if (centaur == NULL)
-		return 0;
-
-	/* Return current frequency */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	return centaur->fsb * ((lo >> 8) & 0xff);
-}
-
-static int eps_set_state(struct eps_cpu_data *centaur,
-			 unsigned int cpu,
-			 u32 dest_state)
-{
-	struct cpufreq_freqs freqs;
-	u32 lo, hi;
-	int err = 0;
-	int i;
-
-	freqs.old = eps_get(cpu);
-	freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
-	freqs.cpu = cpu;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Wait while CPU is busy */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	i = 0;
-	while (lo & ((1 << 16) | (1 << 17))) {
-		udelay(16);
-		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-		i++;
-		if (unlikely(i > 64)) {
-			err = -ENODEV;
-			goto postchange;
-		}
-	}
-	/* Set new multiplier and voltage */
-	wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
-	/* Wait until transition end */
-	i = 0;
-	do {
-		udelay(16);
-		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-		i++;
-		if (unlikely(i > 64)) {
-			err = -ENODEV;
-			goto postchange;
-		}
-	} while (lo & ((1 << 16) | (1 << 17)));
-
-	/* Return current frequency */
-postchange:
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
-
-#ifdef DEBUG
-	{
-	u8 current_multiplier, current_voltage;
-
-	/* Print voltage and multiplier */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	current_voltage = lo & 0xff;
-	printk(KERN_INFO "eps: Current voltage = %dmV\n",
-		current_voltage * 16 + 700);
-	current_multiplier = (lo >> 8) & 0xff;
-	printk(KERN_INFO "eps: Current multiplier = %d\n",
-		current_multiplier);
-	}
-#endif
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	return err;
-}
-
-static int eps_target(struct cpufreq_policy *policy,
-			       unsigned int target_freq,
-			       unsigned int relation)
-{
-	struct eps_cpu_data *centaur;
-	unsigned int newstate = 0;
-	unsigned int cpu = policy->cpu;
-	unsigned int dest_state;
-	int ret;
-
-	if (unlikely(eps_cpu[cpu] == NULL))
-		return -ENODEV;
-	centaur = eps_cpu[cpu];
-
-	if (unlikely(cpufreq_frequency_table_target(policy,
-			&eps_cpu[cpu]->freq_table[0],
-			target_freq,
-			relation,
-			&newstate))) {
-		return -EINVAL;
-	}
-
-	/* Make frequency transition */
-	dest_state = centaur->freq_table[newstate].index & 0xffff;
-	ret = eps_set_state(centaur, cpu, dest_state);
-	if (ret)
-		printk(KERN_ERR "eps: Timeout!\n");
-	return ret;
-}
-
-static int eps_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy,
-			&eps_cpu[policy->cpu]->freq_table[0]);
-}
-
-static int eps_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int i;
-	u32 lo, hi;
-	u64 val;
-	u8 current_multiplier, current_voltage;
-	u8 max_multiplier, max_voltage;
-	u8 min_multiplier, min_voltage;
-	u8 brand = 0;
-	u32 fsb;
-	struct eps_cpu_data *centaur;
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	struct cpufreq_frequency_table *f_table;
-	int k, step, voltage;
-	int ret;
-	int states;
-
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	/* Check brand */
-	printk(KERN_INFO "eps: Detected VIA ");
-
-	switch (c->x86_model) {
-	case 10:
-		rdmsr(0x1153, lo, hi);
-		brand = (((lo >> 2) ^ lo) >> 18) & 3;
-		printk(KERN_CONT "Model A ");
-		break;
-	case 13:
-		rdmsr(0x1154, lo, hi);
-		brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
-		printk(KERN_CONT "Model D ");
-		break;
-	}
-
-	switch (brand) {
-	case EPS_BRAND_C7M:
-		printk(KERN_CONT "C7-M\n");
-		break;
-	case EPS_BRAND_C7:
-		printk(KERN_CONT "C7\n");
-		break;
-	case EPS_BRAND_EDEN:
-		printk(KERN_CONT "Eden\n");
-		break;
-	case EPS_BRAND_C7D:
-		printk(KERN_CONT "C7-D\n");
-		break;
-	case EPS_BRAND_C3:
-		printk(KERN_CONT "C3\n");
-		return -ENODEV;
-		break;
-	}
-	/* Enable Enhanced PowerSaver */
-	rdmsrl(MSR_IA32_MISC_ENABLE, val);
-	if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-		val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
-		wrmsrl(MSR_IA32_MISC_ENABLE, val);
-		/* Can be locked at 0 */
-		rdmsrl(MSR_IA32_MISC_ENABLE, val);
-		if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-			printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
-			return -ENODEV;
-		}
-	}
-
-	/* Print voltage and multiplier */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	current_voltage = lo & 0xff;
-	printk(KERN_INFO "eps: Current voltage = %dmV\n",
-			current_voltage * 16 + 700);
-	current_multiplier = (lo >> 8) & 0xff;
-	printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
-
-	/* Print limits */
-	max_voltage = hi & 0xff;
-	printk(KERN_INFO "eps: Highest voltage = %dmV\n",
-			max_voltage * 16 + 700);
-	max_multiplier = (hi >> 8) & 0xff;
-	printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
-	min_voltage = (hi >> 16) & 0xff;
-	printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
-			min_voltage * 16 + 700);
-	min_multiplier = (hi >> 24) & 0xff;
-	printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
-
-	/* Sanity checks */
-	if (current_multiplier == 0 || max_multiplier == 0
-	    || min_multiplier == 0)
-		return -EINVAL;
-	if (current_multiplier > max_multiplier
-	    || max_multiplier <= min_multiplier)
-		return -EINVAL;
-	if (current_voltage > 0x1f || max_voltage > 0x1f)
-		return -EINVAL;
-	if (max_voltage < min_voltage)
-		return -EINVAL;
-
-	/* Calc FSB speed */
-	fsb = cpu_khz / current_multiplier;
-	/* Calc number of p-states supported */
-	if (brand == EPS_BRAND_C7M)
-		states = max_multiplier - min_multiplier + 1;
-	else
-		states = 2;
-
-	/* Allocate private data and frequency table for current cpu */
-	centaur = kzalloc(sizeof(struct eps_cpu_data)
-		    + (states + 1) * sizeof(struct cpufreq_frequency_table),
-		    GFP_KERNEL);
-	if (!centaur)
-		return -ENOMEM;
-	eps_cpu[0] = centaur;
-
-	/* Copy basic values */
-	centaur->fsb = fsb;
-
-	/* Fill frequency and MSR value table */
-	f_table = &centaur->freq_table[0];
-	if (brand != EPS_BRAND_C7M) {
-		f_table[0].frequency = fsb * min_multiplier;
-		f_table[0].index = (min_multiplier << 8) | min_voltage;
-		f_table[1].frequency = fsb * max_multiplier;
-		f_table[1].index = (max_multiplier << 8) | max_voltage;
-		f_table[2].frequency = CPUFREQ_TABLE_END;
-	} else {
-		k = 0;
-		step = ((max_voltage - min_voltage) * 256)
-			/ (max_multiplier - min_multiplier);
-		for (i = min_multiplier; i <= max_multiplier; i++) {
-			voltage = (k * step) / 256 + min_voltage;
-			f_table[k].frequency = fsb * i;
-			f_table[k].index = (i << 8) | voltage;
-			k++;
-		}
-		f_table[k].frequency = CPUFREQ_TABLE_END;
-	}
-
-	policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
-	policy->cur = fsb * current_multiplier;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, &centaur->freq_table[0]);
-	if (ret) {
-		kfree(centaur);
-		return ret;
-	}
-
-	cpufreq_frequency_table_get_attr(&centaur->freq_table[0], policy->cpu);
-	return 0;
-}
-
-static int eps_cpu_exit(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-	struct eps_cpu_data *centaur;
-	u32 lo, hi;
-
-	if (eps_cpu[cpu] == NULL)
-		return -ENODEV;
-	centaur = eps_cpu[cpu];
-
-	/* Get max frequency */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	/* Set max frequency */
-	eps_set_state(centaur, cpu, hi & 0xffff);
-	/* Bye */
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	kfree(eps_cpu[cpu]);
-	eps_cpu[cpu] = NULL;
-	return 0;
-}
-
-static struct freq_attr *eps_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver eps_driver = {
-	.verify		= eps_verify,
-	.target		= eps_target,
-	.init		= eps_cpu_init,
-	.exit		= eps_cpu_exit,
-	.get		= eps_get,
-	.name		= "e_powersaver",
-	.owner		= THIS_MODULE,
-	.attr		= eps_attr,
-};
-
-static int __init eps_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	/* This driver will work only on Centaur C7 processors with
-	 * Enhanced SpeedStep/PowerSaver registers */
-	if (c->x86_vendor != X86_VENDOR_CENTAUR
-	    || c->x86 != 6 || c->x86_model < 10)
-		return -ENODEV;
-	if (!cpu_has(c, X86_FEATURE_EST))
-		return -ENODEV;
-
-	if (cpufreq_register_driver(&eps_driver))
-		return -EINVAL;
-	return 0;
-}
-
-static void __exit eps_exit(void)
-{
-	cpufreq_unregister_driver(&eps_driver);
-}
-
-MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
-MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
-MODULE_LICENSE("GPL");
-
-module_init(eps_init);
-module_exit(eps_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
deleted file mode 100644
index c587db4..0000000
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- *	elanfreq:	cpufreq driver for the AMD ELAN family
- *
- *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- *	Parts of this code are (c) Sven Geggus <sven@geggus.net>
- *
- *      All Rights Reserved.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/delay.h>
-#include <linux/cpufreq.h>
-
-#include <asm/msr.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#define REG_CSCIR 0x22		/* Chip Setup and Control Index Register    */
-#define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
-
-/* Module parameter */
-static int max_freq;
-
-struct s_elan_multiplier {
-	int clock;		/* frequency in kHz                         */
-	int val40h;		/* PMU Force Mode register                  */
-	int val80h;		/* CPU Clock Speed Register                 */
-};
-
-/*
- * It is important that the frequencies
- * are listed in ascending order here!
- */
-static struct s_elan_multiplier elan_multiplier[] = {
-	{1000,	0x02,	0x18},
-	{2000,	0x02,	0x10},
-	{4000,	0x02,	0x08},
-	{8000,	0x00,	0x00},
-	{16000,	0x00,	0x02},
-	{33000,	0x00,	0x04},
-	{66000,	0x01,	0x04},
-	{99000,	0x01,	0x05}
-};
-
-static struct cpufreq_frequency_table elanfreq_table[] = {
-	{0,	1000},
-	{1,	2000},
-	{2,	4000},
-	{3,	8000},
-	{4,	16000},
-	{5,	33000},
-	{6,	66000},
-	{7,	99000},
-	{0,	CPUFREQ_TABLE_END},
-};
-
-
-/**
- *	elanfreq_get_cpu_frequency: determine current cpu speed
- *
- *	Finds out at which frequency the CPU of the Elan SOC runs
- *	at the moment. Frequencies from 1 to 33 MHz are generated
- *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
- *	and have the rest of the chip running with 33 MHz.
- */
-
-static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
-{
-	u8 clockspeed_reg;    /* Clock Speed Register */
-
-	local_irq_disable();
-	outb_p(0x80, REG_CSCIR);
-	clockspeed_reg = inb_p(REG_CSCDR);
-	local_irq_enable();
-
-	if ((clockspeed_reg & 0xE0) == 0xE0)
-		return 0;
-
-	/* Are we in CPU clock multiplied mode (66/99 MHz)? */
-	if ((clockspeed_reg & 0xE0) == 0xC0) {
-		if ((clockspeed_reg & 0x01) == 0)
-			return 66000;
-		else
-			return 99000;
-	}
-
-	/* 33 MHz is not 32 MHz... */
-	if ((clockspeed_reg & 0xE0) == 0xA0)
-		return 33000;
-
-	return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
-}
-
-
-/**
- *	elanfreq_set_cpu_frequency: Change the CPU core frequency
- *	@cpu: cpu number
- *	@freq: frequency in kHz
- *
- *	This function takes a frequency value and changes the CPU frequency
- *	according to this. Note that the frequency has to be checked by
- *	elanfreq_validatespeed() for correctness!
- *
- *	There is no return value.
- */
-
-static void elanfreq_set_cpu_state(unsigned int state)
-{
-	struct cpufreq_freqs    freqs;
-
-	freqs.old = elanfreq_get_cpu_frequency(0);
-	freqs.new = elan_multiplier[state].clock;
-	freqs.cpu = 0; /* elanfreq.c is UP only driver */
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
-			elan_multiplier[state].clock);
-
-
-	/*
-	 * Access to the Elan's internal registers is indexed via
-	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
-	 * 0x23: Chip Setup & Control Register Data  Register (CSCD)
-	 *
-	 */
-
-	/*
-	 * 0x40 is the Power Management Unit's Force Mode Register.
-	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
-	 */
-
-	local_irq_disable();
-	outb_p(0x40, REG_CSCIR);		/* Disable hyperspeed mode */
-	outb_p(0x00, REG_CSCDR);
-	local_irq_enable();		/* wait till internal pipelines and */
-	udelay(1000);			/* buffers have cleaned up          */
-
-	local_irq_disable();
-
-	/* now, set the CPU clock speed register (0x80) */
-	outb_p(0x80, REG_CSCIR);
-	outb_p(elan_multiplier[state].val80h, REG_CSCDR);
-
-	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
-	outb_p(0x40, REG_CSCIR);
-	outb_p(elan_multiplier[state].val40h, REG_CSCDR);
-	udelay(10000);
-	local_irq_enable();
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-};
-
-
-/**
- *	elanfreq_validatespeed: test if frequency range is valid
- *	@policy: the policy to validate
- *
- *	This function checks if a given frequency range in kHz is valid
- *	for the hardware supported by the driver.
- */
-
-static int elanfreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
-}
-
-static int elanfreq_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int newstate = 0;
-
-	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	elanfreq_set_cpu_state(newstate);
-
-	return 0;
-}
-
-
-/*
- *	Module init and exit code
- */
-
-static int elanfreq_cpu_init(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	unsigned int i;
-	int result;
-
-	/* capability check */
-	if ((c->x86_vendor != X86_VENDOR_AMD) ||
-	    (c->x86 != 4) || (c->x86_model != 10))
-		return -ENODEV;
-
-	/* max freq */
-	if (!max_freq)
-		max_freq = elanfreq_get_cpu_frequency(0);
-
-	/* table init */
-	for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if (elanfreq_table[i].frequency > max_freq)
-			elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
-	}
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	policy->cur = elanfreq_get_cpu_frequency(0);
-
-	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
-	if (result)
-		return result;
-
-	cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
-	return 0;
-}
-
-
-static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-
-#ifndef MODULE
-/**
- * elanfreq_setup - elanfreq command line parameter parsing
- *
- * elanfreq command line parameter.  Use:
- *  elanfreq=66000
- * to set the maximum CPU frequency to 66 MHz. Note that in
- * case you do not give this boot parameter, the maximum
- * frequency will fall back to _current_ CPU frequency which
- * might be lower. If you build this as a module, use the
- * max_freq module parameter instead.
- */
-static int __init elanfreq_setup(char *str)
-{
-	max_freq = simple_strtoul(str, &str, 0);
-	printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
-	return 1;
-}
-__setup("elanfreq=", elanfreq_setup);
-#endif
-
-
-static struct freq_attr *elanfreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-
-static struct cpufreq_driver elanfreq_driver = {
-	.get		= elanfreq_get_cpu_frequency,
-	.verify		= elanfreq_verify,
-	.target		= elanfreq_target,
-	.init		= elanfreq_cpu_init,
-	.exit		= elanfreq_cpu_exit,
-	.name		= "elanfreq",
-	.owner		= THIS_MODULE,
-	.attr		= elanfreq_attr,
-};
-
-
-static int __init elanfreq_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	/* Test if we have the right hardware */
-	if ((c->x86_vendor != X86_VENDOR_AMD) ||
-		(c->x86 != 4) || (c->x86_model != 10)) {
-		printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
-		return -ENODEV;
-	}
-	return cpufreq_register_driver(&elanfreq_driver);
-}
-
-
-static void __exit elanfreq_exit(void)
-{
-	cpufreq_unregister_driver(&elanfreq_driver);
-}
-
-
-module_param(max_freq, int, 0444);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
-		"Sven Geggus <sven@geggus.net>");
-MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
-
-module_init(elanfreq_init);
-module_exit(elanfreq_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
deleted file mode 100644
index ffe1f2c..0000000
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- *	Cyrix MediaGX and NatSemi Geode Suspend Modulation
- *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
- *	(C) 2002 Hiroshi Miura   <miura@da-cha.org>
- *	All Rights Reserved
- *
- *	This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      version 2 as published by the Free Software Foundation
- *
- *      The author(s) of this software shall not be held liable for damages
- *      of any nature resulting due to the use of this software. This
- *      software is provided AS-IS with no warranties.
- *
- * Theoretical note:
- *
- *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
- *
- *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
- *	are based on Suspend Modulation.
- *
- *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
- *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
- *	the CPU enters an idle state. GX1 stops its core clock when SUSP# is
- *	asserted then power consumption is reduced.
- *
- *	Suspend Modulation's OFF/ON duration are configurable
- *	with 'Suspend Modulation OFF Count Register'
- *	and 'Suspend Modulation ON Count Register'.
- *	These registers are 8bit counters that represent the number of
- *	32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
- *	to the processor.
- *
- *	These counters define a ratio which is the effective frequency
- *	of operation of the system.
- *
- *			       OFF Count
- *	F_eff = Fgx * ----------------------
- *	                OFF Count + ON Count
- *
- *	0 <= On Count, Off Count <= 255
- *
- *	From these limits, we can get register values
- *
- *	off_duration + on_duration <= MAX_DURATION
- *	on_duration = off_duration * (stock_freq - freq) / freq
- *
- *      off_duration  =  (freq * DURATION) / stock_freq
- *      on_duration = DURATION - off_duration
- *
- *
- *---------------------------------------------------------------------------
- *
- * ChangeLog:
- *	Dec. 12, 2003	Hiroshi Miura <miura@da-cha.org>
- *		- fix on/off register mistake
- *		- fix cpu_khz calc when it stops cpu modulation.
- *
- *	Dec. 11, 2002	Hiroshi Miura <miura@da-cha.org>
- *		- rewrite for Cyrix MediaGX Cx5510/5520 and
- *		  NatSemi Geode Cs5530(A).
- *
- *	Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
- *		- cs5530_mod patch for 2.4.19-rc1.
- *
- *---------------------------------------------------------------------------
- *
- * Todo
- *	Test on machines with 5510, 5530, 5530A
- */
-
-/************************************************************************
- *			Suspend Modulation - Definitions		*
- ************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/cpufreq.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-
-#include <asm/processor-cyrix.h>
-
-/* PCI config registers, all at F0 */
-#define PCI_PMER1	0x80	/* power management enable register 1 */
-#define PCI_PMER2	0x81	/* power management enable register 2 */
-#define PCI_PMER3	0x82	/* power management enable register 3 */
-#define PCI_IRQTC	0x8c	/* irq speedup timer counter register:typical 2 to 4ms */
-#define PCI_VIDTC	0x8d	/* video speedup timer counter register: typical 50 to 100ms */
-#define PCI_MODOFF	0x94	/* suspend modulation OFF counter register, 1 = 32us */
-#define PCI_MODON	0x95	/* suspend modulation ON counter register */
-#define PCI_SUSCFG	0x96	/* suspend configuration register */
-
-/* PMER1 bits */
-#define GPM		(1<<0)	/* global power management */
-#define GIT		(1<<1)	/* globally enable PM device idle timers */
-#define GTR		(1<<2)	/* globally enable IO traps */
-#define IRQ_SPDUP	(1<<3)	/* disable clock throttle during interrupt handling */
-#define VID_SPDUP	(1<<4)	/* disable clock throttle during vga video handling */
-
-/* SUSCFG bits */
-#define SUSMOD		(1<<0)	/* enable/disable suspend modulation */
-/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
-#define SMISPDUP	(1<<1)	/* select how SMI re-enable suspend modulation: */
-				/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
-#define SUSCFG		(1<<2)	/* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
-/* the below is supported only with cs5530A */
-#define PWRSVE_ISA	(1<<3)	/* stop ISA clock  */
-#define PWRSVE		(1<<4)	/* active idle */
-
-struct gxfreq_params {
-	u8 on_duration;
-	u8 off_duration;
-	u8 pci_suscfg;
-	u8 pci_pmer1;
-	u8 pci_pmer2;
-	struct pci_dev *cs55x0;
-};
-
-static struct gxfreq_params *gx_params;
-static int stock_freq;
-
-/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
-static int pci_busclk;
-module_param(pci_busclk, int, 0444);
-
-/* maximum duration for which the cpu may be suspended
- * (32us * MAX_DURATION). If no parameter is given, this defaults
- * to 255.
- * Note that this leads to a maximum of 8 ms(!) where the CPU clock
- * is suspended -- processing power is just 0.39% of what it used to be,
- * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
-static int max_duration = 255;
-module_param(max_duration, int, 0444);
-
-/* For the default policy, we want at least some processing power
- * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
- */
-#define POLICY_MIN_DIV 20
-
-
-/**
- * we can detect a core multipiler from dir0_lsb
- * from GX1 datasheet p.56,
- *	MULT[3:0]:
- *	0000 = SYSCLK multiplied by 4 (test only)
- *	0001 = SYSCLK multiplied by 10
- *	0010 = SYSCLK multiplied by 4
- *	0011 = SYSCLK multiplied by 6
- *	0100 = SYSCLK multiplied by 9
- *	0101 = SYSCLK multiplied by 5
- *	0110 = SYSCLK multiplied by 7
- *	0111 = SYSCLK multiplied by 8
- *              of 33.3MHz
- **/
-static int gx_freq_mult[16] = {
-		4, 10, 4, 6, 9, 5, 7, 8,
-		0, 0, 0, 0, 0, 0, 0, 0
-};
-
-
-/****************************************************************
- *	Low Level chipset interface				*
- ****************************************************************/
-static struct pci_device_id gx_chipset_tbl[] __initdata = {
-	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), },
-	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
-	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
-	{ 0, },
-};
-
-static void gx_write_byte(int reg, int value)
-{
-	pci_write_config_byte(gx_params->cs55x0, reg, value);
-}
-
-/**
- * gx_detect_chipset:
- *
- **/
-static __init struct pci_dev *gx_detect_chipset(void)
-{
-	struct pci_dev *gx_pci = NULL;
-
-	/* check if CPU is a MediaGX or a Geode. */
-	if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
-	    (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
-		pr_debug("error: no MediaGX/Geode processor found!\n");
-		return NULL;
-	}
-
-	/* detect which companion chip is used */
-	for_each_pci_dev(gx_pci) {
-		if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
-			return gx_pci;
-	}
-
-	pr_debug("error: no supported chipset found!\n");
-	return NULL;
-}
-
-/**
- * gx_get_cpuspeed:
- *
- * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
- * Geode CPU runs.
- */
-static unsigned int gx_get_cpuspeed(unsigned int cpu)
-{
-	if ((gx_params->pci_suscfg & SUSMOD) == 0)
-		return stock_freq;
-
-	return (stock_freq * gx_params->off_duration)
-		/ (gx_params->on_duration + gx_params->off_duration);
-}
-
-/**
- *      gx_validate_speed:
- *      determine current cpu speed
- *
- **/
-
-static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
-		u8 *off_duration)
-{
-	unsigned int i;
-	u8 tmp_on, tmp_off;
-	int old_tmp_freq = stock_freq;
-	int tmp_freq;
-
-	*off_duration = 1;
-	*on_duration = 0;
-
-	for (i = max_duration; i > 0; i--) {
-		tmp_off = ((khz * i) / stock_freq) & 0xff;
-		tmp_on = i - tmp_off;
-		tmp_freq = (stock_freq * tmp_off) / i;
-		/* if this relation is closer to khz, use this. If it's equal,
-		 * prefer it, too - lower latency */
-		if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
-			*on_duration = tmp_on;
-			*off_duration = tmp_off;
-			old_tmp_freq = tmp_freq;
-		}
-	}
-
-	return old_tmp_freq;
-}
-
-
-/**
- * gx_set_cpuspeed:
- * set cpu speed in khz.
- **/
-
-static void gx_set_cpuspeed(unsigned int khz)
-{
-	u8 suscfg, pmer1;
-	unsigned int new_khz;
-	unsigned long flags;
-	struct cpufreq_freqs freqs;
-
-	freqs.cpu = 0;
-	freqs.old = gx_get_cpuspeed(0);
-
-	new_khz = gx_validate_speed(khz, &gx_params->on_duration,
-			&gx_params->off_duration);
-
-	freqs.new = new_khz;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	local_irq_save(flags);
-
-
-
-	if (new_khz != stock_freq) {
-		/* if new khz == 100% of CPU speed, it is special case */
-		switch (gx_params->cs55x0->device) {
-		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
-			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
-			/* FIXME: need to test other values -- Zwane,Miura */
-			/* typical 2 to 4ms */
-			gx_write_byte(PCI_IRQTC, 4);
-			/* typical 50 to 100ms */
-			gx_write_byte(PCI_VIDTC, 100);
-			gx_write_byte(PCI_PMER1, pmer1);
-
-			if (gx_params->cs55x0->revision < 0x10) {
-				/* CS5530(rev 1.2, 1.3) */
-				suscfg = gx_params->pci_suscfg|SUSMOD;
-			} else {
-				/* CS5530A,B.. */
-				suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
-			}
-			break;
-		case PCI_DEVICE_ID_CYRIX_5520:
-		case PCI_DEVICE_ID_CYRIX_5510:
-			suscfg = gx_params->pci_suscfg | SUSMOD;
-			break;
-		default:
-			local_irq_restore(flags);
-			pr_debug("fatal: try to set unknown chipset.\n");
-			return;
-		}
-	} else {
-		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
-		gx_params->off_duration = 0;
-		gx_params->on_duration = 0;
-		pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n");
-	}
-
-	gx_write_byte(PCI_MODOFF, gx_params->off_duration);
-	gx_write_byte(PCI_MODON, gx_params->on_duration);
-
-	gx_write_byte(PCI_SUSCFG, suscfg);
-	pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
-
-	local_irq_restore(flags);
-
-	gx_params->pci_suscfg = suscfg;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
-		gx_params->on_duration * 32, gx_params->off_duration * 32);
-	pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
-}
-
-/****************************************************************
- *             High level functions                             *
- ****************************************************************/
-
-/*
- *	cpufreq_gx_verify: test if frequency range is valid
- *
- *	This function checks if a given frequency range in kHz is valid
- *      for the hardware supported by the driver.
- */
-
-static int cpufreq_gx_verify(struct cpufreq_policy *policy)
-{
-	unsigned int tmp_freq = 0;
-	u8 tmp1, tmp2;
-
-	if (!stock_freq || !policy)
-		return -EINVAL;
-
-	policy->cpu = 0;
-	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
-			stock_freq);
-
-	/* it needs to be assured that at least one supported frequency is
-	 * within policy->min and policy->max. If it is not, policy->max
-	 * needs to be increased until one freuqency is supported.
-	 * policy->min may not be decreased, though. This way we guarantee a
-	 * specific processing capacity.
-	 */
-	tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
-	if (tmp_freq < policy->min)
-		tmp_freq += stock_freq / max_duration;
-	policy->min = tmp_freq;
-	if (policy->min > policy->max)
-		policy->max = tmp_freq;
-	tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
-	if (tmp_freq > policy->max)
-		tmp_freq -= stock_freq / max_duration;
-	policy->max = tmp_freq;
-	if (policy->max < policy->min)
-		policy->max = policy->min;
-	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
-			stock_freq);
-
-	return 0;
-}
-
-/*
- *      cpufreq_gx_target:
- *
- */
-static int cpufreq_gx_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
-{
-	u8 tmp1, tmp2;
-	unsigned int tmp_freq;
-
-	if (!stock_freq || !policy)
-		return -EINVAL;
-
-	policy->cpu = 0;
-
-	tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
-	while (tmp_freq < policy->min) {
-		tmp_freq += stock_freq / max_duration;
-		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
-	}
-	while (tmp_freq > policy->max) {
-		tmp_freq -= stock_freq / max_duration;
-		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
-	}
-
-	gx_set_cpuspeed(tmp_freq);
-
-	return 0;
-}
-
-static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int maxfreq, curfreq;
-
-	if (!policy || policy->cpu != 0)
-		return -ENODEV;
-
-	/* determine maximum frequency */
-	if (pci_busclk)
-		maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
-	else if (cpu_khz)
-		maxfreq = cpu_khz;
-	else
-		maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
-
-	stock_freq = maxfreq;
-	curfreq = gx_get_cpuspeed(0);
-
-	pr_debug("cpu max frequency is %d.\n", maxfreq);
-	pr_debug("cpu current frequency is %dkHz.\n", curfreq);
-
-	/* setup basic struct for cpufreq API */
-	policy->cpu = 0;
-
-	if (max_duration < POLICY_MIN_DIV)
-		policy->min = maxfreq / max_duration;
-	else
-		policy->min = maxfreq / POLICY_MIN_DIV;
-	policy->max = maxfreq;
-	policy->cur = curfreq;
-	policy->cpuinfo.min_freq = maxfreq / max_duration;
-	policy->cpuinfo.max_freq = maxfreq;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-
-	return 0;
-}
-
-/*
- * cpufreq_gx_init:
- *   MediaGX/Geode GX initialize cpufreq driver
- */
-static struct cpufreq_driver gx_suspmod_driver = {
-	.get		= gx_get_cpuspeed,
-	.verify		= cpufreq_gx_verify,
-	.target		= cpufreq_gx_target,
-	.init		= cpufreq_gx_cpu_init,
-	.name		= "gx-suspmod",
-	.owner		= THIS_MODULE,
-};
-
-static int __init cpufreq_gx_init(void)
-{
-	int ret;
-	struct gxfreq_params *params;
-	struct pci_dev *gx_pci;
-
-	/* Test if we have the right hardware */
-	gx_pci = gx_detect_chipset();
-	if (gx_pci == NULL)
-		return -ENODEV;
-
-	/* check whether module parameters are sane */
-	if (max_duration > 0xff)
-		max_duration = 0xff;
-
-	pr_debug("geode suspend modulation available.\n");
-
-	params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
-	if (params == NULL)
-		return -ENOMEM;
-
-	params->cs55x0 = gx_pci;
-	gx_params = params;
-
-	/* keep cs55x0 configurations */
-	pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
-	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
-	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
-	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
-	pci_read_config_byte(params->cs55x0, PCI_MODOFF,
-			&(params->off_duration));
-
-	ret = cpufreq_register_driver(&gx_suspmod_driver);
-	if (ret) {
-		kfree(params);
-		return ret;                   /* register error! */
-	}
-
-	return 0;
-}
-
-static void __exit cpufreq_gx_exit(void)
-{
-	cpufreq_unregister_driver(&gx_suspmod_driver);
-	pci_dev_put(gx_params->cs55x0);
-	kfree(gx_params);
-}
-
-MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
-MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
-MODULE_LICENSE("GPL");
-
-module_init(cpufreq_gx_init);
-module_exit(cpufreq_gx_exit);
-
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
deleted file mode 100644
index f47d26e..0000000
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ /dev/null
@@ -1,1024 +0,0 @@
-/*
- *  (C) 2001-2004  Dave Jones. <davej@redhat.com>
- *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *  Based upon datasheets & sample CPUs kindly provided by VIA.
- *
- *  VIA have currently 3 different versions of Longhaul.
- *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
- *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
- *  Version 2 of longhaul is backward compatible with v1, but adds
- *   LONGHAUL MSR for purpose of both frequency and voltage scaling.
- *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
- *  Version 3 of longhaul got renamed to Powersaver and redesigned
- *   to use only the POWERSAVER MSR at 0x110a.
- *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
- *   It's pretty much the same feature wise to longhaul v2, though
- *   there is provision for scaling FSB too, but this doesn't work
- *   too well in practice so we don't even try to use this.
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/acpi.h>
-
-#include <asm/msr.h>
-#include <acpi/processor.h>
-
-#include "longhaul.h"
-
-#define PFX "longhaul: "
-
-#define TYPE_LONGHAUL_V1	1
-#define TYPE_LONGHAUL_V2	2
-#define TYPE_POWERSAVER		3
-
-#define	CPU_SAMUEL	1
-#define	CPU_SAMUEL2	2
-#define	CPU_EZRA	3
-#define	CPU_EZRA_T	4
-#define	CPU_NEHEMIAH	5
-#define	CPU_NEHEMIAH_C	6
-
-/* Flags */
-#define USE_ACPI_C3		(1 << 1)
-#define USE_NORTHBRIDGE		(1 << 2)
-
-static int cpu_model;
-static unsigned int numscales = 16;
-static unsigned int fsb;
-
-static const struct mV_pos *vrm_mV_table;
-static const unsigned char *mV_vrm_table;
-
-static unsigned int highest_speed, lowest_speed; /* kHz */
-static unsigned int minmult, maxmult;
-static int can_scale_voltage;
-static struct acpi_processor *pr;
-static struct acpi_processor_cx *cx;
-static u32 acpi_regs_addr;
-static u8 longhaul_flags;
-static unsigned int longhaul_index;
-
-/* Module parameters */
-static int scale_voltage;
-static int disable_acpi_c3;
-static int revid_errata;
-
-
-/* Clock ratios multiplied by 10 */
-static int mults[32];
-static int eblcr[32];
-static int longhaul_version;
-static struct cpufreq_frequency_table *longhaul_table;
-
-static char speedbuffer[8];
-
-static char *print_speed(int speed)
-{
-	if (speed < 1000) {
-		snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
-		return speedbuffer;
-	}
-
-	if (speed%1000 == 0)
-		snprintf(speedbuffer, sizeof(speedbuffer),
-			"%dGHz", speed/1000);
-	else
-		snprintf(speedbuffer, sizeof(speedbuffer),
-			"%d.%dGHz", speed/1000, (speed%1000)/100);
-
-	return speedbuffer;
-}
-
-
-static unsigned int calc_speed(int mult)
-{
-	int khz;
-	khz = (mult/10)*fsb;
-	if (mult%10)
-		khz += fsb/2;
-	khz *= 1000;
-	return khz;
-}
-
-
-static int longhaul_get_cpu_mult(void)
-{
-	unsigned long invalue = 0, lo, hi;
-
-	rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
-	invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
-	if (longhaul_version == TYPE_LONGHAUL_V2 ||
-	    longhaul_version == TYPE_POWERSAVER) {
-		if (lo & (1<<27))
-			invalue += 16;
-	}
-	return eblcr[invalue];
-}
-
-/* For processor with BCR2 MSR */
-
-static void do_longhaul1(unsigned int mults_index)
-{
-	union msr_bcr2 bcr2;
-
-	rdmsrl(MSR_VIA_BCR2, bcr2.val);
-	/* Enable software clock multiplier */
-	bcr2.bits.ESOFTBF = 1;
-	bcr2.bits.CLOCKMUL = mults_index & 0xff;
-
-	/* Sync to timer tick */
-	safe_halt();
-	/* Change frequency on next halt or sleep */
-	wrmsrl(MSR_VIA_BCR2, bcr2.val);
-	/* Invoke transition */
-	ACPI_FLUSH_CPU_CACHE();
-	halt();
-
-	/* Disable software clock multiplier */
-	local_irq_disable();
-	rdmsrl(MSR_VIA_BCR2, bcr2.val);
-	bcr2.bits.ESOFTBF = 0;
-	wrmsrl(MSR_VIA_BCR2, bcr2.val);
-}
-
-/* For processor with Longhaul MSR */
-
-static void do_powersaver(int cx_address, unsigned int mults_index,
-			  unsigned int dir)
-{
-	union msr_longhaul longhaul;
-	u32 t;
-
-	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-	/* Setup new frequency */
-	if (!revid_errata)
-		longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
-	else
-		longhaul.bits.RevisionKey = 0;
-	longhaul.bits.SoftBusRatio = mults_index & 0xf;
-	longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
-	/* Setup new voltage */
-	if (can_scale_voltage)
-		longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
-	/* Sync to timer tick */
-	safe_halt();
-	/* Raise voltage if necessary */
-	if (can_scale_voltage && dir) {
-		longhaul.bits.EnableSoftVID = 1;
-		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-		/* Change voltage */
-		if (!cx_address) {
-			ACPI_FLUSH_CPU_CACHE();
-			halt();
-		} else {
-			ACPI_FLUSH_CPU_CACHE();
-			/* Invoke C3 */
-			inb(cx_address);
-			/* Dummy op - must do something useless after P_LVL3
-			 * read */
-			t = inl(acpi_gbl_FADT.xpm_timer_block.address);
-		}
-		longhaul.bits.EnableSoftVID = 0;
-		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-	}
-
-	/* Change frequency on next halt or sleep */
-	longhaul.bits.EnableSoftBusRatio = 1;
-	wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-	if (!cx_address) {
-		ACPI_FLUSH_CPU_CACHE();
-		halt();
-	} else {
-		ACPI_FLUSH_CPU_CACHE();
-		/* Invoke C3 */
-		inb(cx_address);
-		/* Dummy op - must do something useless after P_LVL3 read */
-		t = inl(acpi_gbl_FADT.xpm_timer_block.address);
-	}
-	/* Disable bus ratio bit */
-	longhaul.bits.EnableSoftBusRatio = 0;
-	wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-
-	/* Reduce voltage if necessary */
-	if (can_scale_voltage && !dir) {
-		longhaul.bits.EnableSoftVID = 1;
-		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-		/* Change voltage */
-		if (!cx_address) {
-			ACPI_FLUSH_CPU_CACHE();
-			halt();
-		} else {
-			ACPI_FLUSH_CPU_CACHE();
-			/* Invoke C3 */
-			inb(cx_address);
-			/* Dummy op - must do something useless after P_LVL3
-			 * read */
-			t = inl(acpi_gbl_FADT.xpm_timer_block.address);
-		}
-		longhaul.bits.EnableSoftVID = 0;
-		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-	}
-}
-
-/**
- * longhaul_set_cpu_frequency()
- * @mults_index : bitpattern of the new multiplier.
- *
- * Sets a new clock ratio.
- */
-
-static void longhaul_setstate(unsigned int table_index)
-{
-	unsigned int mults_index;
-	int speed, mult;
-	struct cpufreq_freqs freqs;
-	unsigned long flags;
-	unsigned int pic1_mask, pic2_mask;
-	u16 bm_status = 0;
-	u32 bm_timeout = 1000;
-	unsigned int dir = 0;
-
-	mults_index = longhaul_table[table_index].index;
-	/* Safety precautions */
-	mult = mults[mults_index & 0x1f];
-	if (mult == -1)
-		return;
-	speed = calc_speed(mult);
-	if ((speed > highest_speed) || (speed < lowest_speed))
-		return;
-	/* Voltage transition before frequency transition? */
-	if (can_scale_voltage && longhaul_index < table_index)
-		dir = 1;
-
-	freqs.old = calc_speed(longhaul_get_cpu_mult());
-	freqs.new = speed;
-	freqs.cpu = 0; /* longhaul.c is UP only driver */
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
-			fsb, mult/10, mult%10, print_speed(speed/1000));
-retry_loop:
-	preempt_disable();
-	local_irq_save(flags);
-
-	pic2_mask = inb(0xA1);
-	pic1_mask = inb(0x21);	/* works on C3. save mask. */
-	outb(0xFF, 0xA1);	/* Overkill */
-	outb(0xFE, 0x21);	/* TMR0 only */
-
-	/* Wait while PCI bus is busy. */
-	if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
-	    || ((pr != NULL) && pr->flags.bm_control))) {
-		bm_status = inw(acpi_regs_addr);
-		bm_status &= 1 << 4;
-		while (bm_status && bm_timeout) {
-			outw(1 << 4, acpi_regs_addr);
-			bm_timeout--;
-			bm_status = inw(acpi_regs_addr);
-			bm_status &= 1 << 4;
-		}
-	}
-
-	if (longhaul_flags & USE_NORTHBRIDGE) {
-		/* Disable AGP and PCI arbiters */
-		outb(3, 0x22);
-	} else if ((pr != NULL) && pr->flags.bm_control) {
-		/* Disable bus master arbitration */
-		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
-	}
-	switch (longhaul_version) {
-
-	/*
-	 * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
-	 * Software controlled multipliers only.
-	 */
-	case TYPE_LONGHAUL_V1:
-		do_longhaul1(mults_index);
-		break;
-
-	/*
-	 * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
-	 *
-	 * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
-	 * Nehemiah can do FSB scaling too, but this has never been proven
-	 * to work in practice.
-	 */
-	case TYPE_LONGHAUL_V2:
-	case TYPE_POWERSAVER:
-		if (longhaul_flags & USE_ACPI_C3) {
-			/* Don't allow wakeup */
-			acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
-			do_powersaver(cx->address, mults_index, dir);
-		} else {
-			do_powersaver(0, mults_index, dir);
-		}
-		break;
-	}
-
-	if (longhaul_flags & USE_NORTHBRIDGE) {
-		/* Enable arbiters */
-		outb(0, 0x22);
-	} else if ((pr != NULL) && pr->flags.bm_control) {
-		/* Enable bus master arbitration */
-		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
-	}
-	outb(pic2_mask, 0xA1);	/* restore mask */
-	outb(pic1_mask, 0x21);
-
-	local_irq_restore(flags);
-	preempt_enable();
-
-	freqs.new = calc_speed(longhaul_get_cpu_mult());
-	/* Check if requested frequency is set. */
-	if (unlikely(freqs.new != speed)) {
-		printk(KERN_INFO PFX "Failed to set requested frequency!\n");
-		/* Revision ID = 1 but processor is expecting revision key
-		 * equal to 0. Jumpers at the bottom of processor will change
-		 * multiplier and FSB, but will not change bits in Longhaul
-		 * MSR nor enable voltage scaling. */
-		if (!revid_errata) {
-			printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
-						"option.\n");
-			revid_errata = 1;
-			msleep(200);
-			goto retry_loop;
-		}
-		/* Why ACPI C3 sometimes doesn't work is a mystery for me.
-		 * But it does happen. Processor is entering ACPI C3 state,
-		 * but it doesn't change frequency. I tried poking various
-		 * bits in northbridge registers, but without success. */
-		if (longhaul_flags & USE_ACPI_C3) {
-			printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
-			longhaul_flags &= ~USE_ACPI_C3;
-			if (revid_errata) {
-				printk(KERN_INFO PFX "Disabling \"Ignore "
-						"Revision ID\" option.\n");
-				revid_errata = 0;
-			}
-			msleep(200);
-			goto retry_loop;
-		}
-		/* This shouldn't happen. Longhaul ver. 2 was reported not
-		 * working on processors without voltage scaling, but with
-		 * RevID = 1. RevID errata will make things right. Just
-		 * to be 100% sure. */
-		if (longhaul_version == TYPE_LONGHAUL_V2) {
-			printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
-			longhaul_version = TYPE_LONGHAUL_V1;
-			msleep(200);
-			goto retry_loop;
-		}
-	}
-	/* Report true CPU frequency */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	if (!bm_timeout)
-		printk(KERN_INFO PFX "Warning: Timeout while waiting for "
-				"idle PCI bus.\n");
-}
-
-/*
- * Centaur decided to make life a little more tricky.
- * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
- * Samuel2 and above have to try and guess what the FSB is.
- * We do this by assuming we booted at maximum multiplier, and interpolate
- * between that value multiplied by possible FSBs and cpu_mhz which
- * was calculated at boot time. Really ugly, but no other way to do this.
- */
-
-#define ROUNDING	0xf
-
-static int guess_fsb(int mult)
-{
-	int speed = cpu_khz / 1000;
-	int i;
-	int speeds[] = { 666, 1000, 1333, 2000 };
-	int f_max, f_min;
-
-	for (i = 0; i < 4; i++) {
-		f_max = ((speeds[i] * mult) + 50) / 100;
-		f_max += (ROUNDING / 2);
-		f_min = f_max - ROUNDING;
-		if ((speed <= f_max) && (speed >= f_min))
-			return speeds[i] / 10;
-	}
-	return 0;
-}
-
-
-static int __cpuinit longhaul_get_ranges(void)
-{
-	unsigned int i, j, k = 0;
-	unsigned int ratio;
-	int mult;
-
-	/* Get current frequency */
-	mult = longhaul_get_cpu_mult();
-	if (mult == -1) {
-		printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
-		return -EINVAL;
-	}
-	fsb = guess_fsb(mult);
-	if (fsb == 0) {
-		printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
-		return -EINVAL;
-	}
-	/* Get max multiplier - as we always did.
-	 * Longhaul MSR is useful only when voltage scaling is enabled.
-	 * C3 is booting at max anyway. */
-	maxmult = mult;
-	/* Get min multiplier */
-	switch (cpu_model) {
-	case CPU_NEHEMIAH:
-		minmult = 50;
-		break;
-	case CPU_NEHEMIAH_C:
-		minmult = 40;
-		break;
-	default:
-		minmult = 30;
-		break;
-	}
-
-	pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
-		 minmult/10, minmult%10, maxmult/10, maxmult%10);
-
-	highest_speed = calc_speed(maxmult);
-	lowest_speed = calc_speed(minmult);
-	pr_debug("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
-		 print_speed(lowest_speed/1000),
-		 print_speed(highest_speed/1000));
-
-	if (lowest_speed == highest_speed) {
-		printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
-		return -EINVAL;
-	}
-	if (lowest_speed > highest_speed) {
-		printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
-			lowest_speed, highest_speed);
-		return -EINVAL;
-	}
-
-	longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table),
-			GFP_KERNEL);
-	if (!longhaul_table)
-		return -ENOMEM;
-
-	for (j = 0; j < numscales; j++) {
-		ratio = mults[j];
-		if (ratio == -1)
-			continue;
-		if (ratio > maxmult || ratio < minmult)
-			continue;
-		longhaul_table[k].frequency = calc_speed(ratio);
-		longhaul_table[k].index	= j;
-		k++;
-	}
-	if (k <= 1) {
-		kfree(longhaul_table);
-		return -ENODEV;
-	}
-	/* Sort */
-	for (j = 0; j < k - 1; j++) {
-		unsigned int min_f, min_i;
-		min_f = longhaul_table[j].frequency;
-		min_i = j;
-		for (i = j + 1; i < k; i++) {
-			if (longhaul_table[i].frequency < min_f) {
-				min_f = longhaul_table[i].frequency;
-				min_i = i;
-			}
-		}
-		if (min_i != j) {
-			swap(longhaul_table[j].frequency,
-			     longhaul_table[min_i].frequency);
-			swap(longhaul_table[j].index,
-			     longhaul_table[min_i].index);
-		}
-	}
-
-	longhaul_table[k].frequency = CPUFREQ_TABLE_END;
-
-	/* Find index we are running on */
-	for (j = 0; j < k; j++) {
-		if (mults[longhaul_table[j].index & 0x1f] == mult) {
-			longhaul_index = j;
-			break;
-		}
-	}
-	return 0;
-}
-
-
-static void __cpuinit longhaul_setup_voltagescaling(void)
-{
-	union msr_longhaul longhaul;
-	struct mV_pos minvid, maxvid, vid;
-	unsigned int j, speed, pos, kHz_step, numvscales;
-	int min_vid_speed;
-
-	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
-	if (!(longhaul.bits.RevisionID & 1)) {
-		printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
-		return;
-	}
-
-	if (!longhaul.bits.VRMRev) {
-		printk(KERN_INFO PFX "VRM 8.5\n");
-		vrm_mV_table = &vrm85_mV[0];
-		mV_vrm_table = &mV_vrm85[0];
-	} else {
-		printk(KERN_INFO PFX "Mobile VRM\n");
-		if (cpu_model < CPU_NEHEMIAH)
-			return;
-		vrm_mV_table = &mobilevrm_mV[0];
-		mV_vrm_table = &mV_mobilevrm[0];
-	}
-
-	minvid = vrm_mV_table[longhaul.bits.MinimumVID];
-	maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
-
-	if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
-		printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
-					"Voltage scaling disabled.\n",
-					minvid.mV/1000, minvid.mV%1000,
-					maxvid.mV/1000, maxvid.mV%1000);
-		return;
-	}
-
-	if (minvid.mV == maxvid.mV) {
-		printk(KERN_INFO PFX "Claims to support voltage scaling but "
-				"min & max are both %d.%03d. "
-				"Voltage scaling disabled\n",
-				maxvid.mV/1000, maxvid.mV%1000);
-		return;
-	}
-
-	/* How many voltage steps*/
-	numvscales = maxvid.pos - minvid.pos + 1;
-	printk(KERN_INFO PFX
-		"Max VID=%d.%03d  "
-		"Min VID=%d.%03d, "
-		"%d possible voltage scales\n",
-		maxvid.mV/1000, maxvid.mV%1000,
-		minvid.mV/1000, minvid.mV%1000,
-		numvscales);
-
-	/* Calculate max frequency at min voltage */
-	j = longhaul.bits.MinMHzBR;
-	if (longhaul.bits.MinMHzBR4)
-		j += 16;
-	min_vid_speed = eblcr[j];
-	if (min_vid_speed == -1)
-		return;
-	switch (longhaul.bits.MinMHzFSB) {
-	case 0:
-		min_vid_speed *= 13333;
-		break;
-	case 1:
-		min_vid_speed *= 10000;
-		break;
-	case 3:
-		min_vid_speed *= 6666;
-		break;
-	default:
-		return;
-		break;
-	}
-	if (min_vid_speed >= highest_speed)
-		return;
-	/* Calculate kHz for one voltage step */
-	kHz_step = (highest_speed - min_vid_speed) / numvscales;
-
-	j = 0;
-	while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
-		speed = longhaul_table[j].frequency;
-		if (speed > min_vid_speed)
-			pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
-		else
-			pos = minvid.pos;
-		longhaul_table[j].index |= mV_vrm_table[pos] << 8;
-		vid = vrm_mV_table[mV_vrm_table[pos]];
-		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
-				speed, j, vid.mV);
-		j++;
-	}
-
-	can_scale_voltage = 1;
-	printk(KERN_INFO PFX "Voltage scaling enabled.\n");
-}
-
-
-static int longhaul_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, longhaul_table);
-}
-
-
-static int longhaul_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq, unsigned int relation)
-{
-	unsigned int table_index = 0;
-	unsigned int i;
-	unsigned int dir = 0;
-	u8 vid, current_vid;
-
-	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq,
-				relation, &table_index))
-		return -EINVAL;
-
-	/* Don't set same frequency again */
-	if (longhaul_index == table_index)
-		return 0;
-
-	if (!can_scale_voltage)
-		longhaul_setstate(table_index);
-	else {
-		/* On test system voltage transitions exceeding single
-		 * step up or down were turning motherboard off. Both
-		 * "ondemand" and "userspace" are unsafe. C7 is doing
-		 * this in hardware, C3 is old and we need to do this
-		 * in software. */
-		i = longhaul_index;
-		current_vid = (longhaul_table[longhaul_index].index >> 8);
-		current_vid &= 0x1f;
-		if (table_index > longhaul_index)
-			dir = 1;
-		while (i != table_index) {
-			vid = (longhaul_table[i].index >> 8) & 0x1f;
-			if (vid != current_vid) {
-				longhaul_setstate(i);
-				current_vid = vid;
-				msleep(200);
-			}
-			if (dir)
-				i++;
-			else
-				i--;
-		}
-		longhaul_setstate(table_index);
-	}
-	longhaul_index = table_index;
-	return 0;
-}
-
-
-static unsigned int longhaul_get(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-	return calc_speed(longhaul_get_cpu_mult());
-}
-
-static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
-					  u32 nesting_level,
-					  void *context, void **return_value)
-{
-	struct acpi_device *d;
-
-	if (acpi_bus_get_device(obj_handle, &d))
-		return 0;
-
-	*return_value = acpi_driver_data(d);
-	return 1;
-}
-
-/* VIA don't support PM2 reg, but have something similar */
-static int enable_arbiter_disable(void)
-{
-	struct pci_dev *dev;
-	int status = 1;
-	int reg;
-	u8 pci_cmd;
-
-	/* Find PLE133 host bridge */
-	reg = 0x78;
-	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
-			     NULL);
-	/* Find PM133/VT8605 host bridge */
-	if (dev == NULL)
-		dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				     PCI_DEVICE_ID_VIA_8605_0, NULL);
-	/* Find CLE266 host bridge */
-	if (dev == NULL) {
-		reg = 0x76;
-		dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				     PCI_DEVICE_ID_VIA_862X_0, NULL);
-		/* Find CN400 V-Link host bridge */
-		if (dev == NULL)
-			dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
-	}
-	if (dev != NULL) {
-		/* Enable access to port 0x22 */
-		pci_read_config_byte(dev, reg, &pci_cmd);
-		if (!(pci_cmd & 1<<7)) {
-			pci_cmd |= 1<<7;
-			pci_write_config_byte(dev, reg, pci_cmd);
-			pci_read_config_byte(dev, reg, &pci_cmd);
-			if (!(pci_cmd & 1<<7)) {
-				printk(KERN_ERR PFX
-					"Can't enable access to port 0x22.\n");
-				status = 0;
-			}
-		}
-		pci_dev_put(dev);
-		return status;
-	}
-	return 0;
-}
-
-static int longhaul_setup_southbridge(void)
-{
-	struct pci_dev *dev;
-	u8 pci_cmd;
-
-	/* Find VT8235 southbridge */
-	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
-	if (dev == NULL)
-		/* Find VT8237 southbridge */
-		dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				     PCI_DEVICE_ID_VIA_8237, NULL);
-	if (dev != NULL) {
-		/* Set transition time to max */
-		pci_read_config_byte(dev, 0xec, &pci_cmd);
-		pci_cmd &= ~(1 << 2);
-		pci_write_config_byte(dev, 0xec, pci_cmd);
-		pci_read_config_byte(dev, 0xe4, &pci_cmd);
-		pci_cmd &= ~(1 << 7);
-		pci_write_config_byte(dev, 0xe4, pci_cmd);
-		pci_read_config_byte(dev, 0xe5, &pci_cmd);
-		pci_cmd |= 1 << 7;
-		pci_write_config_byte(dev, 0xe5, pci_cmd);
-		/* Get address of ACPI registers block*/
-		pci_read_config_byte(dev, 0x81, &pci_cmd);
-		if (pci_cmd & 1 << 7) {
-			pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
-			acpi_regs_addr &= 0xff00;
-			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
-					acpi_regs_addr);
-		}
-
-		pci_dev_put(dev);
-		return 1;
-	}
-	return 0;
-}
-
-static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	char *cpuname = NULL;
-	int ret;
-	u32 lo, hi;
-
-	/* Check what we have on this motherboard */
-	switch (c->x86_model) {
-	case 6:
-		cpu_model = CPU_SAMUEL;
-		cpuname = "C3 'Samuel' [C5A]";
-		longhaul_version = TYPE_LONGHAUL_V1;
-		memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
-		memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
-		break;
-
-	case 7:
-		switch (c->x86_mask) {
-		case 0:
-			longhaul_version = TYPE_LONGHAUL_V1;
-			cpu_model = CPU_SAMUEL2;
-			cpuname = "C3 'Samuel 2' [C5B]";
-			/* Note, this is not a typo, early Samuel2's had
-			 * Samuel1 ratios. */
-			memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
-			memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
-			break;
-		case 1 ... 15:
-			longhaul_version = TYPE_LONGHAUL_V2;
-			if (c->x86_mask < 8) {
-				cpu_model = CPU_SAMUEL2;
-				cpuname = "C3 'Samuel 2' [C5B]";
-			} else {
-				cpu_model = CPU_EZRA;
-				cpuname = "C3 'Ezra' [C5C]";
-			}
-			memcpy(mults, ezra_mults, sizeof(ezra_mults));
-			memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
-			break;
-		}
-		break;
-
-	case 8:
-		cpu_model = CPU_EZRA_T;
-		cpuname = "C3 'Ezra-T' [C5M]";
-		longhaul_version = TYPE_POWERSAVER;
-		numscales = 32;
-		memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
-		memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
-		break;
-
-	case 9:
-		longhaul_version = TYPE_POWERSAVER;
-		numscales = 32;
-		memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
-		memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
-		switch (c->x86_mask) {
-		case 0 ... 1:
-			cpu_model = CPU_NEHEMIAH;
-			cpuname = "C3 'Nehemiah A' [C5XLOE]";
-			break;
-		case 2 ... 4:
-			cpu_model = CPU_NEHEMIAH;
-			cpuname = "C3 'Nehemiah B' [C5XLOH]";
-			break;
-		case 5 ... 15:
-			cpu_model = CPU_NEHEMIAH_C;
-			cpuname = "C3 'Nehemiah C' [C5P]";
-			break;
-		}
-		break;
-
-	default:
-		cpuname = "Unknown";
-		break;
-	}
-	/* Check Longhaul ver. 2 */
-	if (longhaul_version == TYPE_LONGHAUL_V2) {
-		rdmsr(MSR_VIA_LONGHAUL, lo, hi);
-		if (lo == 0 && hi == 0)
-			/* Looks like MSR isn't present */
-			longhaul_version = TYPE_LONGHAUL_V1;
-	}
-
-	printk(KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
-	switch (longhaul_version) {
-	case TYPE_LONGHAUL_V1:
-	case TYPE_LONGHAUL_V2:
-		printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
-		break;
-	case TYPE_POWERSAVER:
-		printk(KERN_CONT "Powersaver supported.\n");
-		break;
-	};
-
-	/* Doesn't hurt */
-	longhaul_setup_southbridge();
-
-	/* Find ACPI data for processor */
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
-				ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
-				NULL, (void *)&pr);
-
-	/* Check ACPI support for C3 state */
-	if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
-		cx = &pr->power.states[ACPI_STATE_C3];
-		if (cx->address > 0 && cx->latency <= 1000)
-			longhaul_flags |= USE_ACPI_C3;
-	}
-	/* Disable if it isn't working */
-	if (disable_acpi_c3)
-		longhaul_flags &= ~USE_ACPI_C3;
-	/* Check if northbridge is friendly */
-	if (enable_arbiter_disable())
-		longhaul_flags |= USE_NORTHBRIDGE;
-
-	/* Check ACPI support for bus master arbiter disable */
-	if (!(longhaul_flags & USE_ACPI_C3
-	     || longhaul_flags & USE_NORTHBRIDGE)
-	    && ((pr == NULL) || !(pr->flags.bm_control))) {
-		printk(KERN_ERR PFX
-			"No ACPI support. Unsupported northbridge.\n");
-		return -ENODEV;
-	}
-
-	if (longhaul_flags & USE_NORTHBRIDGE)
-		printk(KERN_INFO PFX "Using northbridge support.\n");
-	if (longhaul_flags & USE_ACPI_C3)
-		printk(KERN_INFO PFX "Using ACPI support.\n");
-
-	ret = longhaul_get_ranges();
-	if (ret != 0)
-		return ret;
-
-	if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
-		longhaul_setup_voltagescaling();
-
-	policy->cpuinfo.transition_latency = 200000;	/* nsec */
-	policy->cur = calc_speed(longhaul_get_cpu_mult());
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
-	if (ret)
-		return ret;
-
-	cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
-
-	return 0;
-}
-
-static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *longhaul_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver longhaul_driver = {
-	.verify	= longhaul_verify,
-	.target	= longhaul_target,
-	.get	= longhaul_get,
-	.init	= longhaul_cpu_init,
-	.exit	= __devexit_p(longhaul_cpu_exit),
-	.name	= "longhaul",
-	.owner	= THIS_MODULE,
-	.attr	= longhaul_attr,
-};
-
-
-static int __init longhaul_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
-		return -ENODEV;
-
-#ifdef CONFIG_SMP
-	if (num_online_cpus() > 1) {
-		printk(KERN_ERR PFX "More than 1 CPU detected, "
-				"longhaul disabled.\n");
-		return -ENODEV;
-	}
-#endif
-#ifdef CONFIG_X86_IO_APIC
-	if (cpu_has_apic) {
-		printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
-				"broken in this configuration.\n");
-		return -ENODEV;
-	}
-#endif
-	switch (c->x86_model) {
-	case 6 ... 9:
-		return cpufreq_register_driver(&longhaul_driver);
-	case 10:
-		printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
-	default:
-		;
-	}
-
-	return -ENODEV;
-}
-
-
-static void __exit longhaul_exit(void)
-{
-	int i;
-
-	for (i = 0; i < numscales; i++) {
-		if (mults[i] == maxmult) {
-			longhaul_setstate(i);
-			break;
-		}
-	}
-
-	cpufreq_unregister_driver(&longhaul_driver);
-	kfree(longhaul_table);
-}
-
-/* Even if BIOS is exporting ACPI C3 state, and it is used
- * with success when CPU is idle, this state doesn't
- * trigger frequency transition in some cases. */
-module_param(disable_acpi_c3, int, 0644);
-MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
-/* Change CPU voltage with frequency. Very useful to save
- * power, but most VIA C3 processors aren't supporting it. */
-module_param(scale_voltage, int, 0644);
-MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
-/* Force revision key to 0 for processors which doesn't
- * support voltage scaling, but are introducing itself as
- * such. */
-module_param(revid_errata, int, 0644);
-MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
-
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
-MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
-MODULE_LICENSE("GPL");
-
-late_initcall(longhaul_init);
-module_exit(longhaul_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h
deleted file mode 100644
index cbf48fb..0000000
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- *  longhaul.h
- *  (C) 2003 Dave Jones.
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  VIA-specific information
- */
-
-union msr_bcr2 {
-	struct {
-		unsigned Reseved:19,	// 18:0
-		ESOFTBF:1,		// 19
-		Reserved2:3,		// 22:20
-		CLOCKMUL:4,		// 26:23
-		Reserved3:5;		// 31:27
-	} bits;
-	unsigned long val;
-};
-
-union msr_longhaul {
-	struct {
-		unsigned RevisionID:4,	// 3:0
-		RevisionKey:4,		// 7:4
-		EnableSoftBusRatio:1,	// 8
-		EnableSoftVID:1,	// 9
-		EnableSoftBSEL:1,	// 10
-		Reserved:3,		// 11:13
-		SoftBusRatio4:1,	// 14
-		VRMRev:1,		// 15
-		SoftBusRatio:4,		// 19:16
-		SoftVID:5,		// 24:20
-		Reserved2:3,		// 27:25
-		SoftBSEL:2,		// 29:28
-		Reserved3:2,		// 31:30
-		MaxMHzBR:4,		// 35:32
-		MaximumVID:5,		// 40:36
-		MaxMHzFSB:2,		// 42:41
-		MaxMHzBR4:1,		// 43
-		Reserved4:4,		// 47:44
-		MinMHzBR:4,		// 51:48
-		MinimumVID:5,		// 56:52
-		MinMHzFSB:2,		// 58:57
-		MinMHzBR4:1,		// 59
-		Reserved5:4;		// 63:60
-	} bits;
-	unsigned long long val;
-};
-
-/*
- * Clock ratio tables. Div/Mod by 10 to get ratio.
- * The eblcr values specify the ratio read from the CPU.
- * The mults values specify what to write to the CPU.
- */
-
-/*
- * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
- */
-static const int __cpuinitdata samuel1_mults[16] = {
-	-1, /* 0000 -> RESERVED */
-	30, /* 0001 ->  3.0x */
-	40, /* 0010 ->  4.0x */
-	-1, /* 0011 -> RESERVED */
-	-1, /* 0100 -> RESERVED */
-	35, /* 0101 ->  3.5x */
-	45, /* 0110 ->  4.5x */
-	55, /* 0111 ->  5.5x */
-	60, /* 1000 ->  6.0x */
-	70, /* 1001 ->  7.0x */
-	80, /* 1010 ->  8.0x */
-	50, /* 1011 ->  5.0x */
-	65, /* 1100 ->  6.5x */
-	75, /* 1101 ->  7.5x */
-	-1, /* 1110 -> RESERVED */
-	-1, /* 1111 -> RESERVED */
-};
-
-static const int __cpuinitdata samuel1_eblcr[16] = {
-	50, /* 0000 -> RESERVED */
-	30, /* 0001 ->  3.0x */
-	40, /* 0010 ->  4.0x */
-	-1, /* 0011 -> RESERVED */
-	55, /* 0100 ->  5.5x */
-	35, /* 0101 ->  3.5x */
-	45, /* 0110 ->  4.5x */
-	-1, /* 0111 -> RESERVED */
-	-1, /* 1000 -> RESERVED */
-	70, /* 1001 ->  7.0x */
-	80, /* 1010 ->  8.0x */
-	60, /* 1011 ->  6.0x */
-	-1, /* 1100 -> RESERVED */
-	75, /* 1101 ->  7.5x */
-	-1, /* 1110 -> RESERVED */
-	65, /* 1111 ->  6.5x */
-};
-
-/*
- * VIA C3 Samuel2 Stepping 1->15
- */
-static const int __cpuinitdata samuel2_eblcr[16] = {
-	50,  /* 0000 ->  5.0x */
-	30,  /* 0001 ->  3.0x */
-	40,  /* 0010 ->  4.0x */
-	100, /* 0011 -> 10.0x */
-	55,  /* 0100 ->  5.5x */
-	35,  /* 0101 ->  3.5x */
-	45,  /* 0110 ->  4.5x */
-	110, /* 0111 -> 11.0x */
-	90,  /* 1000 ->  9.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	60,  /* 1011 ->  6.0x */
-	120, /* 1100 -> 12.0x */
-	75,  /* 1101 ->  7.5x */
-	130, /* 1110 -> 13.0x */
-	65,  /* 1111 ->  6.5x */
-};
-
-/*
- * VIA C3 Ezra
- */
-static const int __cpuinitdata ezra_mults[16] = {
-	100, /* 0000 -> 10.0x */
-	30,  /* 0001 ->  3.0x */
-	40,  /* 0010 ->  4.0x */
-	90,  /* 0011 ->  9.0x */
-	95,  /* 0100 ->  9.5x */
-	35,  /* 0101 ->  3.5x */
-	45,  /* 0110 ->  4.5x */
-	55,  /* 0111 ->  5.5x */
-	60,  /* 1000 ->  6.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	50,  /* 1011 ->  5.0x */
-	65,  /* 1100 ->  6.5x */
-	75,  /* 1101 ->  7.5x */
-	85,  /* 1110 ->  8.5x */
-	120, /* 1111 -> 12.0x */
-};
-
-static const int __cpuinitdata ezra_eblcr[16] = {
-	50,  /* 0000 ->  5.0x */
-	30,  /* 0001 ->  3.0x */
-	40,  /* 0010 ->  4.0x */
-	100, /* 0011 -> 10.0x */
-	55,  /* 0100 ->  5.5x */
-	35,  /* 0101 ->  3.5x */
-	45,  /* 0110 ->  4.5x */
-	95,  /* 0111 ->  9.5x */
-	90,  /* 1000 ->  9.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	60,  /* 1011 ->  6.0x */
-	120, /* 1100 -> 12.0x */
-	75,  /* 1101 ->  7.5x */
-	85,  /* 1110 ->  8.5x */
-	65,  /* 1111 ->  6.5x */
-};
-
-/*
- * VIA C3 (Ezra-T) [C5M].
- */
-static const int __cpuinitdata ezrat_mults[32] = {
-	100, /* 0000 -> 10.0x */
-	30,  /* 0001 ->  3.0x */
-	40,  /* 0010 ->  4.0x */
-	90,  /* 0011 ->  9.0x */
-	95,  /* 0100 ->  9.5x */
-	35,  /* 0101 ->  3.5x */
-	45,  /* 0110 ->  4.5x */
-	55,  /* 0111 ->  5.5x */
-	60,  /* 1000 ->  6.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	50,  /* 1011 ->  5.0x */
-	65,  /* 1100 ->  6.5x */
-	75,  /* 1101 ->  7.5x */
-	85,  /* 1110 ->  8.5x */
-	120, /* 1111 ->  12.0x */
-
-	-1,  /* 0000 -> RESERVED (10.0x) */
-	110, /* 0001 -> 11.0x */
-	-1, /* 0010 -> 12.0x */
-	-1,  /* 0011 -> RESERVED (9.0x)*/
-	105, /* 0100 -> 10.5x */
-	115, /* 0101 -> 11.5x */
-	125, /* 0110 -> 12.5x */
-	135, /* 0111 -> 13.5x */
-	140, /* 1000 -> 14.0x */
-	150, /* 1001 -> 15.0x */
-	160, /* 1010 -> 16.0x */
-	130, /* 1011 -> 13.0x */
-	145, /* 1100 -> 14.5x */
-	155, /* 1101 -> 15.5x */
-	-1,  /* 1110 -> RESERVED (13.0x) */
-	-1,  /* 1111 -> RESERVED (12.0x) */
-};
-
-static const int __cpuinitdata ezrat_eblcr[32] = {
-	50,  /* 0000 ->  5.0x */
-	30,  /* 0001 ->  3.0x */
-	40,  /* 0010 ->  4.0x */
-	100, /* 0011 -> 10.0x */
-	55,  /* 0100 ->  5.5x */
-	35,  /* 0101 ->  3.5x */
-	45,  /* 0110 ->  4.5x */
-	95,  /* 0111 ->  9.5x */
-	90,  /* 1000 ->  9.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	60,  /* 1011 ->  6.0x */
-	120, /* 1100 -> 12.0x */
-	75,  /* 1101 ->  7.5x */
-	85,  /* 1110 ->  8.5x */
-	65,  /* 1111 ->  6.5x */
-
-	-1,  /* 0000 -> RESERVED (9.0x) */
-	110, /* 0001 -> 11.0x */
-	120, /* 0010 -> 12.0x */
-	-1,  /* 0011 -> RESERVED (10.0x)*/
-	135, /* 0100 -> 13.5x */
-	115, /* 0101 -> 11.5x */
-	125, /* 0110 -> 12.5x */
-	105, /* 0111 -> 10.5x */
-	130, /* 1000 -> 13.0x */
-	150, /* 1001 -> 15.0x */
-	160, /* 1010 -> 16.0x */
-	140, /* 1011 -> 14.0x */
-	-1,  /* 1100 -> RESERVED (12.0x) */
-	155, /* 1101 -> 15.5x */
-	-1,  /* 1110 -> RESERVED (13.0x) */
-	145, /* 1111 -> 14.5x */
-};
-
-/*
- * VIA C3 Nehemiah */
-
-static const int __cpuinitdata nehemiah_mults[32] = {
-	100, /* 0000 -> 10.0x */
-	-1, /* 0001 -> 16.0x */
-	40,  /* 0010 ->  4.0x */
-	90,  /* 0011 ->  9.0x */
-	95,  /* 0100 ->  9.5x */
-	-1,  /* 0101 ->  RESERVED */
-	45,  /* 0110 ->  4.5x */
-	55,  /* 0111 ->  5.5x */
-	60,  /* 1000 ->  6.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	50,  /* 1011 ->  5.0x */
-	65,  /* 1100 ->  6.5x */
-	75,  /* 1101 ->  7.5x */
-	85,  /* 1110 ->  8.5x */
-	120, /* 1111 -> 12.0x */
-	-1, /* 0000 -> 10.0x */
-	110, /* 0001 -> 11.0x */
-	-1, /* 0010 -> 12.0x */
-	-1,  /* 0011 ->  9.0x */
-	105, /* 0100 -> 10.5x */
-	115, /* 0101 -> 11.5x */
-	125, /* 0110 -> 12.5x */
-	135, /* 0111 -> 13.5x */
-	140, /* 1000 -> 14.0x */
-	150, /* 1001 -> 15.0x */
-	160, /* 1010 -> 16.0x */
-	130, /* 1011 -> 13.0x */
-	145, /* 1100 -> 14.5x */
-	155, /* 1101 -> 15.5x */
-	-1,  /* 1110 -> RESERVED (13.0x) */
-	-1, /* 1111 -> 12.0x */
-};
-
-static const int __cpuinitdata nehemiah_eblcr[32] = {
-	50,  /* 0000 ->  5.0x */
-	160, /* 0001 -> 16.0x */
-	40,  /* 0010 ->  4.0x */
-	100, /* 0011 -> 10.0x */
-	55,  /* 0100 ->  5.5x */
-	-1,  /* 0101 ->  RESERVED */
-	45,  /* 0110 ->  4.5x */
-	95,  /* 0111 ->  9.5x */
-	90,  /* 1000 ->  9.0x */
-	70,  /* 1001 ->  7.0x */
-	80,  /* 1010 ->  8.0x */
-	60,  /* 1011 ->  6.0x */
-	120, /* 1100 -> 12.0x */
-	75,  /* 1101 ->  7.5x */
-	85,  /* 1110 ->  8.5x */
-	65,  /* 1111 ->  6.5x */
-	90,  /* 0000 ->  9.0x */
-	110, /* 0001 -> 11.0x */
-	120, /* 0010 -> 12.0x */
-	100, /* 0011 -> 10.0x */
-	135, /* 0100 -> 13.5x */
-	115, /* 0101 -> 11.5x */
-	125, /* 0110 -> 12.5x */
-	105, /* 0111 -> 10.5x */
-	130, /* 1000 -> 13.0x */
-	150, /* 1001 -> 15.0x */
-	160, /* 1010 -> 16.0x */
-	140, /* 1011 -> 14.0x */
-	120, /* 1100 -> 12.0x */
-	155, /* 1101 -> 15.5x */
-	-1,  /* 1110 -> RESERVED (13.0x) */
-	145 /* 1111 -> 14.5x */
-};
-
-/*
- * Voltage scales. Div/Mod by 1000 to get actual voltage.
- * Which scale to use depends on the VRM type in use.
- */
-
-struct mV_pos {
-	unsigned short mV;
-	unsigned short pos;
-};
-
-static const struct mV_pos __cpuinitdata vrm85_mV[32] = {
-	{1250, 8},	{1200, 6},	{1150, 4},	{1100, 2},
-	{1050, 0},	{1800, 30},	{1750, 28},	{1700, 26},
-	{1650, 24},	{1600, 22},	{1550, 20},	{1500, 18},
-	{1450, 16},	{1400, 14},	{1350, 12},	{1300, 10},
-	{1275, 9},	{1225, 7},	{1175, 5},	{1125, 3},
-	{1075, 1},	{1825, 31},	{1775, 29},	{1725, 27},
-	{1675, 25},	{1625, 23},	{1575, 21},	{1525, 19},
-	{1475, 17},	{1425, 15},	{1375, 13},	{1325, 11}
-};
-
-static const unsigned char __cpuinitdata mV_vrm85[32] = {
-	0x04,	0x14,	0x03,	0x13,	0x02,	0x12,	0x01,	0x11,
-	0x00,	0x10,	0x0f,	0x1f,	0x0e,	0x1e,	0x0d,	0x1d,
-	0x0c,	0x1c,	0x0b,	0x1b,	0x0a,	0x1a,	0x09,	0x19,
-	0x08,	0x18,	0x07,	0x17,	0x06,	0x16,	0x05,	0x15
-};
-
-static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = {
-	{1750, 31},	{1700, 30},	{1650, 29},	{1600, 28},
-	{1550, 27},	{1500, 26},	{1450, 25},	{1400, 24},
-	{1350, 23},	{1300, 22},	{1250, 21},	{1200, 20},
-	{1150, 19},	{1100, 18},	{1050, 17},	{1000, 16},
-	{975, 15},	{950, 14},	{925, 13},	{900, 12},
-	{875, 11},	{850, 10},	{825, 9},	{800, 8},
-	{775, 7},	{750, 6},	{725, 5},	{700, 4},
-	{675, 3},	{650, 2},	{625, 1},	{600, 0}
-};
-
-static const unsigned char __cpuinitdata mV_mobilevrm[32] = {
-	0x1f,	0x1e,	0x1d,	0x1c,	0x1b,	0x1a,	0x19,	0x18,
-	0x17,	0x16,	0x15,	0x14,	0x13,	0x12,	0x11,	0x10,
-	0x0f,	0x0e,	0x0d,	0x0c,	0x0b,	0x0a,	0x09,	0x08,
-	0x07,	0x06,	0x05,	0x04,	0x03,	0x02,	0x01,	0x00
-};
-
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
deleted file mode 100644
index 34ea359..0000000
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/timex.h>
-
-#include <asm/msr.h>
-#include <asm/processor.h>
-
-static struct cpufreq_driver	longrun_driver;
-
-/**
- * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
- * values into per cent values. In TMTA microcode, the following is valid:
- * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
- */
-static unsigned int longrun_low_freq, longrun_high_freq;
-
-
-/**
- * longrun_get_policy - get the current LongRun policy
- * @policy: struct cpufreq_policy where current policy is written into
- *
- * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
- * and MSR_TMTA_LONGRUN_CTRL
- */
-static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy)
-{
-	u32 msr_lo, msr_hi;
-
-	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
-	pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
-	if (msr_lo & 0x01)
-		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
-	else
-		policy->policy = CPUFREQ_POLICY_POWERSAVE;
-
-	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
-	pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
-	msr_lo &= 0x0000007F;
-	msr_hi &= 0x0000007F;
-
-	if (longrun_high_freq <= longrun_low_freq) {
-		/* Assume degenerate Longrun table */
-		policy->min = policy->max = longrun_high_freq;
-	} else {
-		policy->min = longrun_low_freq + msr_lo *
-			((longrun_high_freq - longrun_low_freq) / 100);
-		policy->max = longrun_low_freq + msr_hi *
-			((longrun_high_freq - longrun_low_freq) / 100);
-	}
-	policy->cpu = 0;
-}
-
-
-/**
- * longrun_set_policy - sets a new CPUFreq policy
- * @policy: new policy
- *
- * Sets a new CPUFreq policy on LongRun-capable processors. This function
- * has to be called with cpufreq_driver locked.
- */
-static int longrun_set_policy(struct cpufreq_policy *policy)
-{
-	u32 msr_lo, msr_hi;
-	u32 pctg_lo, pctg_hi;
-
-	if (!policy)
-		return -EINVAL;
-
-	if (longrun_high_freq <= longrun_low_freq) {
-		/* Assume degenerate Longrun table */
-		pctg_lo = pctg_hi = 100;
-	} else {
-		pctg_lo = (policy->min - longrun_low_freq) /
-			((longrun_high_freq - longrun_low_freq) / 100);
-		pctg_hi = (policy->max - longrun_low_freq) /
-			((longrun_high_freq - longrun_low_freq) / 100);
-	}
-
-	if (pctg_hi > 100)
-		pctg_hi = 100;
-	if (pctg_lo > pctg_hi)
-		pctg_lo = pctg_hi;
-
-	/* performance or economy mode */
-	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
-	msr_lo &= 0xFFFFFFFE;
-	switch (policy->policy) {
-	case CPUFREQ_POLICY_PERFORMANCE:
-		msr_lo |= 0x00000001;
-		break;
-	case CPUFREQ_POLICY_POWERSAVE:
-		break;
-	}
-	wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
-
-	/* lower and upper boundary */
-	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
-	msr_lo &= 0xFFFFFF80;
-	msr_hi &= 0xFFFFFF80;
-	msr_lo |= pctg_lo;
-	msr_hi |= pctg_hi;
-	wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
-
-	return 0;
-}
-
-
-/**
- * longrun_verify_poliy - verifies a new CPUFreq policy
- * @policy: the policy to verify
- *
- * Validates a new CPUFreq policy. This function has to be called with
- * cpufreq_driver locked.
- */
-static int longrun_verify_policy(struct cpufreq_policy *policy)
-{
-	if (!policy)
-		return -EINVAL;
-
-	policy->cpu = 0;
-	cpufreq_verify_within_limits(policy,
-		policy->cpuinfo.min_freq,
-		policy->cpuinfo.max_freq);
-
-	if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
-	    (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
-		return -EINVAL;
-
-	return 0;
-}
-
-static unsigned int longrun_get(unsigned int cpu)
-{
-	u32 eax, ebx, ecx, edx;
-
-	if (cpu)
-		return 0;
-
-	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
-	pr_debug("cpuid eax is %u\n", eax);
-
-	return eax * 1000;
-}
-
-/**
- * longrun_determine_freqs - determines the lowest and highest possible core frequency
- * @low_freq: an int to put the lowest frequency into
- * @high_freq: an int to put the highest frequency into
- *
- * Determines the lowest and highest possible core frequencies on this CPU.
- * This is necessary to calculate the performance percentage according to
- * TMTA rules:
- * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
- */
-static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
-						      unsigned int *high_freq)
-{
-	u32 msr_lo, msr_hi;
-	u32 save_lo, save_hi;
-	u32 eax, ebx, ecx, edx;
-	u32 try_hi;
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (!low_freq || !high_freq)
-		return -EINVAL;
-
-	if (cpu_has(c, X86_FEATURE_LRTI)) {
-		/* if the LongRun Table Interface is present, the
-		 * detection is a bit easier:
-		 * For minimum frequency, read out the maximum
-		 * level (msr_hi), write that into "currently
-		 * selected level", and read out the frequency.
-		 * For maximum frequency, read out level zero.
-		 */
-		/* minimum */
-		rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
-		wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
-		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
-		*low_freq = msr_lo * 1000; /* to kHz */
-
-		/* maximum */
-		wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
-		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
-		*high_freq = msr_lo * 1000; /* to kHz */
-
-		pr_debug("longrun table interface told %u - %u kHz\n",
-				*low_freq, *high_freq);
-
-		if (*low_freq > *high_freq)
-			*low_freq = *high_freq;
-		return 0;
-	}
-
-	/* set the upper border to the value determined during TSC init */
-	*high_freq = (cpu_khz / 1000);
-	*high_freq = *high_freq * 1000;
-	pr_debug("high frequency is %u kHz\n", *high_freq);
-
-	/* get current borders */
-	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
-	save_lo = msr_lo & 0x0000007F;
-	save_hi = msr_hi & 0x0000007F;
-
-	/* if current perf_pctg is larger than 90%, we need to decrease the
-	 * upper limit to make the calculation more accurate.
-	 */
-	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
-	/* try decreasing in 10% steps, some processors react only
-	 * on some barrier values */
-	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
-		/* set to 0 to try_hi perf_pctg */
-		msr_lo &= 0xFFFFFF80;
-		msr_hi &= 0xFFFFFF80;
-		msr_hi |= try_hi;
-		wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
-
-		/* read out current core MHz and current perf_pctg */
-		cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
-
-		/* restore values */
-		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
-	}
-	pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
-
-	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
-	 * eqals
-	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
-	 *
-	 * high_freq * perf_pctg is stored tempoarily into "ebx".
-	 */
-	ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
-
-	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
-		return -EIO;
-
-	edx = ((eax - ebx) * 100) / (100 - ecx);
-	*low_freq = edx * 1000; /* back to kHz */
-
-	pr_debug("low frequency is %u kHz\n", *low_freq);
-
-	if (*low_freq > *high_freq)
-		*low_freq = *high_freq;
-
-	return 0;
-}
-
-
-static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy)
-{
-	int result = 0;
-
-	/* capability check */
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	/* detect low and high frequency */
-	result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
-	if (result)
-		return result;
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.min_freq = longrun_low_freq;
-	policy->cpuinfo.max_freq = longrun_high_freq;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	longrun_get_policy(policy);
-
-	return 0;
-}
-
-
-static struct cpufreq_driver longrun_driver = {
-	.flags		= CPUFREQ_CONST_LOOPS,
-	.verify		= longrun_verify_policy,
-	.setpolicy	= longrun_set_policy,
-	.get		= longrun_get,
-	.init		= longrun_cpu_init,
-	.name		= "longrun",
-	.owner		= THIS_MODULE,
-};
-
-
-/**
- * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
- *
- * Initializes the LongRun support.
- */
-static int __init longrun_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
-	    !cpu_has(c, X86_FEATURE_LONGRUN))
-		return -ENODEV;
-
-	return cpufreq_register_driver(&longrun_driver);
-}
-
-
-/**
- * longrun_exit - unregisters LongRun support
- */
-static void __exit longrun_exit(void)
-{
-	cpufreq_unregister_driver(&longrun_driver);
-}
-
-
-MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
-		"Efficeon processors.");
-MODULE_LICENSE("GPL");
-
-module_init(longrun_init);
-module_exit(longrun_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/arch/x86/kernel/cpu/cpufreq/mperf.c
deleted file mode 100644
index 911e193..0000000
--- a/arch/x86/kernel/cpu/cpufreq/mperf.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-
-#include "mperf.h"
-
-static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf);
-
-/* Called via smp_call_function_single(), on the target CPU */
-static void read_measured_perf_ctrs(void *_cur)
-{
-	struct aperfmperf *am = _cur;
-
-	get_aperfmperf(am);
-}
-
-/*
- * Return the measured active (C0) frequency on this CPU since last call
- * to this function.
- * Input: cpu number
- * Return: Average CPU frequency in terms of max frequency (zero on error)
- *
- * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
- * over a period of time, while CPU is in C0 state.
- * IA32_MPERF counts at the rate of max advertised frequency
- * IA32_APERF counts at the rate of actual CPU frequency
- * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
- * no meaning should be associated with absolute values of these MSRs.
- */
-unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
-					unsigned int cpu)
-{
-	struct aperfmperf perf;
-	unsigned long ratio;
-	unsigned int retval;
-
-	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1))
-		return 0;
-
-	ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf);
-	per_cpu(acfreq_old_perf, cpu) = perf;
-
-	retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT;
-
-	return retval;
-}
-EXPORT_SYMBOL_GPL(cpufreq_get_measured_perf);
-MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/arch/x86/kernel/cpu/cpufreq/mperf.h
deleted file mode 100644
index 5dbf295..0000000
--- a/arch/x86/kernel/cpu/cpufreq/mperf.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- *  (c) 2010 Advanced Micro Devices, Inc.
- *  Your use of this code is subject to the terms and conditions of the
- *  GNU general public license version 2. See "COPYING" or
- *  http://www.gnu.org/licenses/gpl.html
- */
-
-unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
-					unsigned int cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
deleted file mode 100644
index 6be3e07..0000000
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- *	Pentium 4/Xeon CPU on demand clock modulation/speed scaling
- *	(C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
- *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
- *	(C) 2002 Arjan van de Ven <arjanv@redhat.com>
- *	(C) 2002 Tora T. Engstad
- *	All Rights Reserved
- *
- *	This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- *
- *      The author(s) of this software shall not be held liable for damages
- *      of any nature resulting due to the use of this software. This
- *      software is provided AS-IS with no warranties.
- *
- *	Date		Errata			Description
- *	20020525	N44, O17	12.5% or 25% DC causes lockup
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/cpufreq.h>
-#include <linux/cpumask.h>
-#include <linux/timex.h>
-
-#include <asm/processor.h>
-#include <asm/msr.h>
-#include <asm/timer.h>
-
-#include "speedstep-lib.h"
-
-#define PFX	"p4-clockmod: "
-
-/*
- * Duty Cycle (3bits), note DC_DISABLE is not specified in
- * intel docs i just use it to mean disable
- */
-enum {
-	DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
-	DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
-};
-
-#define DC_ENTRIES	8
-
-
-static int has_N44_O17_errata[NR_CPUS];
-static unsigned int stock_freq;
-static struct cpufreq_driver p4clockmod_driver;
-static unsigned int cpufreq_p4_get(unsigned int cpu);
-
-static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
-{
-	u32 l, h;
-
-	if (!cpu_online(cpu) ||
-	    (newstate > DC_DISABLE) || (newstate == DC_RESV))
-		return -EINVAL;
-
-	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
-
-	if (l & 0x01)
-		pr_debug("CPU#%d currently thermal throttled\n", cpu);
-
-	if (has_N44_O17_errata[cpu] &&
-	    (newstate == DC_25PT || newstate == DC_DFLT))
-		newstate = DC_38PT;
-
-	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
-	if (newstate == DC_DISABLE) {
-		pr_debug("CPU#%d disabling modulation\n", cpu);
-		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
-	} else {
-		pr_debug("CPU#%d setting duty cycle to %d%%\n",
-			cpu, ((125 * newstate) / 10));
-		/* bits 63 - 5	: reserved
-		 * bit  4	: enable/disable
-		 * bits 3-1	: duty cycle
-		 * bit  0	: reserved
-		 */
-		l = (l & ~14);
-		l = l | (1<<4) | ((newstate & 0x7)<<1);
-		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
-	}
-
-	return 0;
-}
-
-
-static struct cpufreq_frequency_table p4clockmod_table[] = {
-	{DC_RESV, CPUFREQ_ENTRY_INVALID},
-	{DC_DFLT, 0},
-	{DC_25PT, 0},
-	{DC_38PT, 0},
-	{DC_50PT, 0},
-	{DC_64PT, 0},
-	{DC_75PT, 0},
-	{DC_88PT, 0},
-	{DC_DISABLE, 0},
-	{DC_RESV, CPUFREQ_TABLE_END},
-};
-
-
-static int cpufreq_p4_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
-{
-	unsigned int    newstate = DC_RESV;
-	struct cpufreq_freqs freqs;
-	int i;
-
-	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	freqs.old = cpufreq_p4_get(policy->cpu);
-	freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
-
-	if (freqs.new == freqs.old)
-		return 0;
-
-	/* notifiers */
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
-
-	/* run on each logical CPU,
-	 * see section 13.15.3 of IA32 Intel Architecture Software
-	 * Developer's Manual, Volume 3
-	 */
-	for_each_cpu(i, policy->cpus)
-		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
-
-	/* notifiers */
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-
-	return 0;
-}
-
-
-static int cpufreq_p4_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
-}
-
-
-static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
-{
-	if (c->x86 == 0x06) {
-		if (cpu_has(c, X86_FEATURE_EST))
-			printk_once(KERN_WARNING PFX "Warning: EST-capable "
-			       "CPU detected. The acpi-cpufreq module offers "
-			       "voltage scaling in addition to frequency "
-			       "scaling. You should use that instead of "
-			       "p4-clockmod, if possible.\n");
-		switch (c->x86_model) {
-		case 0x0E: /* Core */
-		case 0x0F: /* Core Duo */
-		case 0x16: /* Celeron Core */
-		case 0x1C: /* Atom */
-			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
-			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
-		case 0x0D: /* Pentium M (Dothan) */
-			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
-			/* fall through */
-		case 0x09: /* Pentium M (Banias) */
-			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
-		}
-	}
-
-	if (c->x86 != 0xF)
-		return 0;
-
-	/* on P-4s, the TSC runs with constant frequency independent whether
-	 * throttling is active or not. */
-	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
-
-	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
-		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
-		       "The speedstep-ich or acpi cpufreq modules offer "
-		       "voltage scaling in addition of frequency scaling. "
-		       "You should use either one instead of p4-clockmod, "
-		       "if possible.\n");
-		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
-	}
-
-	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
-}
-
-
-
-static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
-	int cpuid = 0;
-	unsigned int i;
-
-#ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
-#endif
-
-	/* Errata workaround */
-	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
-	switch (cpuid) {
-	case 0x0f07:
-	case 0x0f0a:
-	case 0x0f11:
-	case 0x0f12:
-		has_N44_O17_errata[policy->cpu] = 1;
-		pr_debug("has errata -- disabling low frequencies\n");
-	}
-
-	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
-	    c->x86_model < 2) {
-		/* switch to maximum frequency and measure result */
-		cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
-		recalibrate_cpu_khz();
-	}
-	/* get max frequency */
-	stock_freq = cpufreq_p4_get_frequency(c);
-	if (!stock_freq)
-		return -EINVAL;
-
-	/* table init */
-	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
-			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
-		else
-			p4clockmod_table[i].frequency = (stock_freq * i)/8;
-	}
-	cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
-
-	/* cpuinfo and default policy values */
-
-	/* the transition latency is set to be 1 higher than the maximum
-	 * transition latency of the ondemand governor */
-	policy->cpuinfo.transition_latency = 10000001;
-	policy->cur = stock_freq;
-
-	return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
-}
-
-
-static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static unsigned int cpufreq_p4_get(unsigned int cpu)
-{
-	u32 l, h;
-
-	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
-
-	if (l & 0x10) {
-		l = l >> 1;
-		l &= 0x7;
-	} else
-		l = DC_DISABLE;
-
-	if (l != DC_DISABLE)
-		return stock_freq * l / 8;
-
-	return stock_freq;
-}
-
-static struct freq_attr *p4clockmod_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver p4clockmod_driver = {
-	.verify		= cpufreq_p4_verify,
-	.target		= cpufreq_p4_target,
-	.init		= cpufreq_p4_cpu_init,
-	.exit		= cpufreq_p4_cpu_exit,
-	.get		= cpufreq_p4_get,
-	.name		= "p4-clockmod",
-	.owner		= THIS_MODULE,
-	.attr		= p4clockmod_attr,
-};
-
-
-static int __init cpufreq_p4_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	int ret;
-
-	/*
-	 * THERM_CONTROL is architectural for IA32 now, so
-	 * we can rely on the capability checks
-	 */
-	if (c->x86_vendor != X86_VENDOR_INTEL)
-		return -ENODEV;
-
-	if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
-				!test_cpu_cap(c, X86_FEATURE_ACC))
-		return -ENODEV;
-
-	ret = cpufreq_register_driver(&p4clockmod_driver);
-	if (!ret)
-		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
-				"Modulation available\n");
-
-	return ret;
-}
-
-
-static void __exit cpufreq_p4_exit(void)
-{
-	cpufreq_unregister_driver(&p4clockmod_driver);
-}
-
-
-MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
-MODULE_LICENSE("GPL");
-
-late_initcall(cpufreq_p4_init);
-module_exit(cpufreq_p4_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
deleted file mode 100644
index 7b0603e..0000000
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ /dev/null
@@ -1,621 +0,0 @@
-/*
- *  pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface
- *
- *  Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
- *  Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
- *	Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
- *  INFRINGEMENT. See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/sched.h>
-#include <linux/cpufreq.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/uaccess.h>
-
-#include <acpi/processor.h>
-
-#define PCC_VERSION	"1.10.00"
-#define POLL_LOOPS 	300
-
-#define CMD_COMPLETE 	0x1
-#define CMD_GET_FREQ 	0x0
-#define CMD_SET_FREQ 	0x1
-
-#define BUF_SZ		4
-
-struct pcc_register_resource {
-	u8 descriptor;
-	u16 length;
-	u8 space_id;
-	u8 bit_width;
-	u8 bit_offset;
-	u8 access_size;
-	u64 address;
-} __attribute__ ((packed));
-
-struct pcc_memory_resource {
-	u8 descriptor;
-	u16 length;
-	u8 space_id;
-	u8 resource_usage;
-	u8 type_specific;
-	u64 granularity;
-	u64 minimum;
-	u64 maximum;
-	u64 translation_offset;
-	u64 address_length;
-} __attribute__ ((packed));
-
-static struct cpufreq_driver pcc_cpufreq_driver;
-
-struct pcc_header {
-	u32 signature;
-	u16 length;
-	u8 major;
-	u8 minor;
-	u32 features;
-	u16 command;
-	u16 status;
-	u32 latency;
-	u32 minimum_time;
-	u32 maximum_time;
-	u32 nominal;
-	u32 throttled_frequency;
-	u32 minimum_frequency;
-};
-
-static void __iomem *pcch_virt_addr;
-static struct pcc_header __iomem *pcch_hdr;
-
-static DEFINE_SPINLOCK(pcc_lock);
-
-static struct acpi_generic_address doorbell;
-
-static u64 doorbell_preserve;
-static u64 doorbell_write;
-
-static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49,
-			  0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
-
-struct pcc_cpu {
-	u32 input_offset;
-	u32 output_offset;
-};
-
-static struct pcc_cpu __percpu *pcc_cpu_info;
-
-static int pcc_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static inline void pcc_cmd(void)
-{
-	u64 doorbell_value;
-	int i;
-
-	acpi_read(&doorbell_value, &doorbell);
-	acpi_write((doorbell_value & doorbell_preserve) | doorbell_write,
-		   &doorbell);
-
-	for (i = 0; i < POLL_LOOPS; i++) {
-		if (ioread16(&pcch_hdr->status) & CMD_COMPLETE)
-			break;
-	}
-}
-
-static inline void pcc_clear_mapping(void)
-{
-	if (pcch_virt_addr)
-		iounmap(pcch_virt_addr);
-	pcch_virt_addr = NULL;
-}
-
-static unsigned int pcc_get_freq(unsigned int cpu)
-{
-	struct pcc_cpu *pcc_cpu_data;
-	unsigned int curr_freq;
-	unsigned int freq_limit;
-	u16 status;
-	u32 input_buffer;
-	u32 output_buffer;
-
-	spin_lock(&pcc_lock);
-
-	pr_debug("get: get_freq for CPU %d\n", cpu);
-	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
-
-	input_buffer = 0x1;
-	iowrite32(input_buffer,
-			(pcch_virt_addr + pcc_cpu_data->input_offset));
-	iowrite16(CMD_GET_FREQ, &pcch_hdr->command);
-
-	pcc_cmd();
-
-	output_buffer =
-		ioread32(pcch_virt_addr + pcc_cpu_data->output_offset);
-
-	/* Clear the input buffer - we are done with the current command */
-	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
-
-	status = ioread16(&pcch_hdr->status);
-	if (status != CMD_COMPLETE) {
-		pr_debug("get: FAILED: for CPU %d, status is %d\n",
-			cpu, status);
-		goto cmd_incomplete;
-	}
-	iowrite16(0, &pcch_hdr->status);
-	curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
-			/ 100) * 1000);
-
-	pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is "
-		"0x%p, contains a value of: 0x%x. Speed is: %d MHz\n",
-		cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
-		output_buffer, curr_freq);
-
-	freq_limit = (output_buffer >> 8) & 0xff;
-	if (freq_limit != 0xff) {
-		pr_debug("get: frequency for cpu %d is being temporarily"
-			" capped at %d\n", cpu, curr_freq);
-	}
-
-	spin_unlock(&pcc_lock);
-	return curr_freq;
-
-cmd_incomplete:
-	iowrite16(0, &pcch_hdr->status);
-	spin_unlock(&pcc_lock);
-	return 0;
-}
-
-static int pcc_cpufreq_target(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct pcc_cpu *pcc_cpu_data;
-	struct cpufreq_freqs freqs;
-	u16 status;
-	u32 input_buffer;
-	int cpu;
-
-	spin_lock(&pcc_lock);
-	cpu = policy->cpu;
-	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
-
-	pr_debug("target: CPU %d should go to target freq: %d "
-		"(virtual) input_offset is 0x%p\n",
-		cpu, target_freq,
-		(pcch_virt_addr + pcc_cpu_data->input_offset));
-
-	freqs.new = target_freq;
-	freqs.cpu = cpu;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	input_buffer = 0x1 | (((target_freq * 100)
-			       / (ioread32(&pcch_hdr->nominal) * 1000)) << 8);
-	iowrite32(input_buffer,
-			(pcch_virt_addr + pcc_cpu_data->input_offset));
-	iowrite16(CMD_SET_FREQ, &pcch_hdr->command);
-
-	pcc_cmd();
-
-	/* Clear the input buffer - we are done with the current command */
-	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
-
-	status = ioread16(&pcch_hdr->status);
-	if (status != CMD_COMPLETE) {
-		pr_debug("target: FAILED for cpu %d, with status: 0x%x\n",
-			cpu, status);
-		goto cmd_incomplete;
-	}
-	iowrite16(0, &pcch_hdr->status);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu);
-	spin_unlock(&pcc_lock);
-
-	return 0;
-
-cmd_incomplete:
-	iowrite16(0, &pcch_hdr->status);
-	spin_unlock(&pcc_lock);
-	return -EINVAL;
-}
-
-static int pcc_get_offset(int cpu)
-{
-	acpi_status status;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	union acpi_object *pccp, *offset;
-	struct pcc_cpu *pcc_cpu_data;
-	struct acpi_processor *pr;
-	int ret = 0;
-
-	pr = per_cpu(processors, cpu);
-	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
-
-	status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	pccp = buffer.pointer;
-	if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) {
-		ret = -ENODEV;
-		goto out_free;
-	};
-
-	offset = &(pccp->package.elements[0]);
-	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	pcc_cpu_data->input_offset = offset->integer.value;
-
-	offset = &(pccp->package.elements[1]);
-	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	pcc_cpu_data->output_offset = offset->integer.value;
-
-	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
-	memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
-
-	pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data "
-		"input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
-		cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
-out_free:
-	kfree(buffer.pointer);
-	return ret;
-}
-
-static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
-{
-	acpi_status status;
-	struct acpi_object_list input;
-	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
-	union acpi_object in_params[4];
-	union acpi_object *out_obj;
-	u32 capabilities[2];
-	u32 errors;
-	u32 supported;
-	int ret = 0;
-
-	input.count = 4;
-	input.pointer = in_params;
-	in_params[0].type               = ACPI_TYPE_BUFFER;
-	in_params[0].buffer.length      = 16;
-	in_params[0].buffer.pointer     = OSC_UUID;
-	in_params[1].type               = ACPI_TYPE_INTEGER;
-	in_params[1].integer.value      = 1;
-	in_params[2].type               = ACPI_TYPE_INTEGER;
-	in_params[2].integer.value      = 2;
-	in_params[3].type               = ACPI_TYPE_BUFFER;
-	in_params[3].buffer.length      = 8;
-	in_params[3].buffer.pointer     = (u8 *)&capabilities;
-
-	capabilities[0] = OSC_QUERY_ENABLE;
-	capabilities[1] = 0x1;
-
-	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	if (!output.length)
-		return -ENODEV;
-
-	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
-	if (errors) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	supported = *((u32 *)(out_obj->buffer.pointer + 4));
-	if (!(supported & 0x1)) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	kfree(output.pointer);
-	capabilities[0] = 0x0;
-	capabilities[1] = 0x1;
-
-	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	if (!output.length)
-		return -ENODEV;
-
-	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
-	if (errors) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	supported = *((u32 *)(out_obj->buffer.pointer + 4));
-	if (!(supported & 0x1)) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-out_free:
-	kfree(output.pointer);
-	return ret;
-}
-
-static int __init pcc_cpufreq_probe(void)
-{
-	acpi_status status;
-	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
-	struct pcc_memory_resource *mem_resource;
-	struct pcc_register_resource *reg_resource;
-	union acpi_object *out_obj, *member;
-	acpi_handle handle, osc_handle, pcch_handle;
-	int ret = 0;
-
-	status = acpi_get_handle(NULL, "\\_SB", &handle);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	status = acpi_get_handle(handle, "PCCH", &pcch_handle);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	status = acpi_get_handle(handle, "_OSC", &osc_handle);
-	if (ACPI_SUCCESS(status)) {
-		ret = pcc_cpufreq_do_osc(&osc_handle);
-		if (ret)
-			pr_debug("probe: _OSC evaluation did not succeed\n");
-		/* Firmware's use of _OSC is optional */
-		ret = 0;
-	}
-
-	status = acpi_evaluate_object(handle, "PCCH", NULL, &output);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_PACKAGE) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	member = &out_obj->package.elements[0];
-	if (member->type != ACPI_TYPE_BUFFER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
-
-	pr_debug("probe: mem_resource descriptor: 0x%x,"
-		" length: %d, space_id: %d, resource_usage: %d,"
-		" type_specific: %d, granularity: 0x%llx,"
-		" minimum: 0x%llx, maximum: 0x%llx,"
-		" translation_offset: 0x%llx, address_length: 0x%llx\n",
-		mem_resource->descriptor, mem_resource->length,
-		mem_resource->space_id, mem_resource->resource_usage,
-		mem_resource->type_specific, mem_resource->granularity,
-		mem_resource->minimum, mem_resource->maximum,
-		mem_resource->translation_offset,
-		mem_resource->address_length);
-
-	if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
-					mem_resource->address_length);
-	if (pcch_virt_addr == NULL) {
-		pr_debug("probe: could not map shared mem region\n");
-		goto out_free;
-	}
-	pcch_hdr = pcch_virt_addr;
-
-	pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
-	pr_debug("probe: PCCH header is at physical address: 0x%llx,"
-		" signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
-		" supported features: 0x%x, command field: 0x%x,"
-		" status field: 0x%x, nominal latency: %d us\n",
-		mem_resource->minimum, ioread32(&pcch_hdr->signature),
-		ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major),
-		ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features),
-		ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
-		ioread32(&pcch_hdr->latency));
-
-	pr_debug("probe: min time between commands: %d us,"
-		" max time between commands: %d us,"
-		" nominal CPU frequency: %d MHz,"
-		" minimum CPU frequency: %d MHz,"
-		" minimum CPU frequency without throttling: %d MHz\n",
-		ioread32(&pcch_hdr->minimum_time),
-		ioread32(&pcch_hdr->maximum_time),
-		ioread32(&pcch_hdr->nominal),
-		ioread32(&pcch_hdr->throttled_frequency),
-		ioread32(&pcch_hdr->minimum_frequency));
-
-	member = &out_obj->package.elements[1];
-	if (member->type != ACPI_TYPE_BUFFER) {
-		ret = -ENODEV;
-		goto pcch_free;
-	}
-
-	reg_resource = (struct pcc_register_resource *)member->buffer.pointer;
-
-	doorbell.space_id = reg_resource->space_id;
-	doorbell.bit_width = reg_resource->bit_width;
-	doorbell.bit_offset = reg_resource->bit_offset;
-	doorbell.access_width = 64;
-	doorbell.address = reg_resource->address;
-
-	pr_debug("probe: doorbell: space_id is %d, bit_width is %d, "
-		"bit_offset is %d, access_width is %d, address is 0x%llx\n",
-		doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
-		doorbell.access_width, reg_resource->address);
-
-	member = &out_obj->package.elements[2];
-	if (member->type != ACPI_TYPE_INTEGER) {
-		ret = -ENODEV;
-		goto pcch_free;
-	}
-
-	doorbell_preserve = member->integer.value;
-
-	member = &out_obj->package.elements[3];
-	if (member->type != ACPI_TYPE_INTEGER) {
-		ret = -ENODEV;
-		goto pcch_free;
-	}
-
-	doorbell_write = member->integer.value;
-
-	pr_debug("probe: doorbell_preserve: 0x%llx,"
-		" doorbell_write: 0x%llx\n",
-		doorbell_preserve, doorbell_write);
-
-	pcc_cpu_info = alloc_percpu(struct pcc_cpu);
-	if (!pcc_cpu_info) {
-		ret = -ENOMEM;
-		goto pcch_free;
-	}
-
-	printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency"
-	       " limits: %d MHz, %d MHz\n", PCC_VERSION,
-	       ioread32(&pcch_hdr->minimum_frequency),
-	       ioread32(&pcch_hdr->nominal));
-	kfree(output.pointer);
-	return ret;
-pcch_free:
-	pcc_clear_mapping();
-out_free:
-	kfree(output.pointer);
-	return ret;
-}
-
-static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-	unsigned int result = 0;
-
-	if (!pcch_virt_addr) {
-		result = -1;
-		goto out;
-	}
-
-	result = pcc_get_offset(cpu);
-	if (result) {
-		pr_debug("init: PCCP evaluation failed\n");
-		goto out;
-	}
-
-	policy->max = policy->cpuinfo.max_freq =
-		ioread32(&pcch_hdr->nominal) * 1000;
-	policy->min = policy->cpuinfo.min_freq =
-		ioread32(&pcch_hdr->minimum_frequency) * 1000;
-	policy->cur = pcc_get_freq(cpu);
-
-	if (!policy->cur) {
-		pr_debug("init: Unable to get current CPU frequency\n");
-		result = -EINVAL;
-		goto out;
-	}
-
-	pr_debug("init: policy->max is %d, policy->min is %d\n",
-		policy->max, policy->min);
-out:
-	return result;
-}
-
-static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static struct cpufreq_driver pcc_cpufreq_driver = {
-	.flags = CPUFREQ_CONST_LOOPS,
-	.get = pcc_get_freq,
-	.verify = pcc_cpufreq_verify,
-	.target = pcc_cpufreq_target,
-	.init = pcc_cpufreq_cpu_init,
-	.exit = pcc_cpufreq_cpu_exit,
-	.name = "pcc-cpufreq",
-	.owner = THIS_MODULE,
-};
-
-static int __init pcc_cpufreq_init(void)
-{
-	int ret;
-
-	if (acpi_disabled)
-		return 0;
-
-	ret = pcc_cpufreq_probe();
-	if (ret) {
-		pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n");
-		return ret;
-	}
-
-	ret = cpufreq_register_driver(&pcc_cpufreq_driver);
-
-	return ret;
-}
-
-static void __exit pcc_cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&pcc_cpufreq_driver);
-
-	pcc_clear_mapping();
-
-	free_percpu(pcc_cpu_info);
-}
-
-MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar");
-MODULE_VERSION(PCC_VERSION);
-MODULE_DESCRIPTION("Processor Clocking Control interface driver");
-MODULE_LICENSE("GPL");
-
-late_initcall(pcc_cpufreq_init);
-module_exit(pcc_cpufreq_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
deleted file mode 100644
index b3379d6..0000000
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
- *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä,
- *                 Dominik Brodowski.
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#include <asm/msr.h>
-
-#define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
-					   as it is unused */
-
-#define PFX "powernow-k6: "
-static unsigned int                     busfreq;   /* FSB, in 10 kHz */
-static unsigned int                     max_multiplier;
-
-
-/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
-static struct cpufreq_frequency_table clock_ratio[] = {
-	{45,  /* 000 -> 4.5x */ 0},
-	{50,  /* 001 -> 5.0x */ 0},
-	{40,  /* 010 -> 4.0x */ 0},
-	{55,  /* 011 -> 5.5x */ 0},
-	{20,  /* 100 -> 2.0x */ 0},
-	{30,  /* 101 -> 3.0x */ 0},
-	{60,  /* 110 -> 6.0x */ 0},
-	{35,  /* 111 -> 3.5x */ 0},
-	{0, CPUFREQ_TABLE_END}
-};
-
-
-/**
- * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
- *
- *   Returns the current setting of the frequency multiplier. Core clock
- * speed is frequency of the Front-Side Bus multiplied with this value.
- */
-static int powernow_k6_get_cpu_multiplier(void)
-{
-	u64 invalue = 0;
-	u32 msrval;
-
-	msrval = POWERNOW_IOPORT + 0x1;
-	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
-	invalue = inl(POWERNOW_IOPORT + 0x8);
-	msrval = POWERNOW_IOPORT + 0x0;
-	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
-
-	return clock_ratio[(invalue >> 5)&7].index;
-}
-
-
-/**
- * powernow_k6_set_state - set the PowerNow! multiplier
- * @best_i: clock_ratio[best_i] is the target multiplier
- *
- *   Tries to change the PowerNow! multiplier
- */
-static void powernow_k6_set_state(unsigned int best_i)
-{
-	unsigned long outvalue = 0, invalue = 0;
-	unsigned long msrval;
-	struct cpufreq_freqs freqs;
-
-	if (clock_ratio[best_i].index > max_multiplier) {
-		printk(KERN_ERR PFX "invalid target frequency\n");
-		return;
-	}
-
-	freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
-	freqs.new = busfreq * clock_ratio[best_i].index;
-	freqs.cpu = 0; /* powernow-k6.c is UP only driver */
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* we now need to transform best_i to the BVC format, see AMD#23446 */
-
-	outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
-
-	msrval = POWERNOW_IOPORT + 0x1;
-	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
-	invalue = inl(POWERNOW_IOPORT + 0x8);
-	invalue = invalue & 0xf;
-	outvalue = outvalue | invalue;
-	outl(outvalue , (POWERNOW_IOPORT + 0x8));
-	msrval = POWERNOW_IOPORT + 0x0;
-	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return;
-}
-
-
-/**
- * powernow_k6_verify - verifies a new CPUfreq policy
- * @policy: new policy
- *
- * Policy must be within lowest and highest possible CPU Frequency,
- * and at least one possible state must be within min and max.
- */
-static int powernow_k6_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &clock_ratio[0]);
-}
-
-
-/**
- * powernow_k6_setpolicy - sets a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * sets a new CPUFreq policy
- */
-static int powernow_k6_target(struct cpufreq_policy *policy,
-			       unsigned int target_freq,
-			       unsigned int relation)
-{
-	unsigned int newstate = 0;
-
-	if (cpufreq_frequency_table_target(policy, &clock_ratio[0],
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	powernow_k6_set_state(newstate);
-
-	return 0;
-}
-
-
-static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int i, f;
-	int result;
-
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	/* get frequencies */
-	max_multiplier = powernow_k6_get_cpu_multiplier();
-	busfreq = cpu_khz / max_multiplier;
-
-	/* table init */
-	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
-		f = clock_ratio[i].index;
-		if (f > max_multiplier)
-			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
-		else
-			clock_ratio[i].frequency = busfreq * f;
-	}
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 200000;
-	policy->cur = busfreq * max_multiplier;
-
-	result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
-	if (result)
-		return result;
-
-	cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu);
-
-	return 0;
-}
-
-
-static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
-{
-	unsigned int i;
-	for (i = 0; i < 8; i++) {
-		if (i == max_multiplier)
-			powernow_k6_set_state(i);
-	}
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static unsigned int powernow_k6_get(unsigned int cpu)
-{
-	unsigned int ret;
-	ret = (busfreq * powernow_k6_get_cpu_multiplier());
-	return ret;
-}
-
-static struct freq_attr *powernow_k6_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver powernow_k6_driver = {
-	.verify		= powernow_k6_verify,
-	.target		= powernow_k6_target,
-	.init		= powernow_k6_cpu_init,
-	.exit		= powernow_k6_cpu_exit,
-	.get		= powernow_k6_get,
-	.name		= "powernow-k6",
-	.owner		= THIS_MODULE,
-	.attr		= powernow_k6_attr,
-};
-
-
-/**
- * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
- *
- *   Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
- * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
- * on success.
- */
-static int __init powernow_k6_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
-		((c->x86_model != 12) && (c->x86_model != 13)))
-		return -ENODEV;
-
-	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
-		printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
-		return -EIO;
-	}
-
-	if (cpufreq_register_driver(&powernow_k6_driver)) {
-		release_region(POWERNOW_IOPORT, 16);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
-/**
- * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
- *
- *   Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
- */
-static void __exit powernow_k6_exit(void)
-{
-	cpufreq_unregister_driver(&powernow_k6_driver);
-	release_region(POWERNOW_IOPORT, 16);
-}
-
-
-MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, "
-		"Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
-MODULE_LICENSE("GPL");
-
-module_init(powernow_k6_init);
-module_exit(powernow_k6_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
deleted file mode 100644
index d71d9f3..0000000
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ /dev/null
@@ -1,747 +0,0 @@
-/*
- *  AMD K7 Powernow driver.
- *  (C) 2003 Dave Jones on behalf of SuSE Labs.
- *  (C) 2003-2004 Dave Jones <davej@redhat.com>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *  Based upon datasheets & sample CPUs kindly provided by AMD.
- *
- * Errata 5:
- *  CPU may fail to execute a FID/VID change in presence of interrupt.
- *  - We cli/sti on stepping A0 CPUs around the FID/VID transition.
- * Errata 15:
- *  CPU with half frequency multipliers may hang upon wakeup from disconnect.
- *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dmi.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
-#include <asm/msr.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-#include <linux/acpi.h>
-#include <acpi/processor.h>
-#endif
-
-#include "powernow-k7.h"
-
-#define PFX "powernow: "
-
-
-struct psb_s {
-	u8 signature[10];
-	u8 tableversion;
-	u8 flags;
-	u16 settlingtime;
-	u8 reserved1;
-	u8 numpst;
-};
-
-struct pst_s {
-	u32 cpuid;
-	u8 fsbspeed;
-	u8 maxfid;
-	u8 startvid;
-	u8 numpstates;
-};
-
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-union powernow_acpi_control_t {
-	struct {
-		unsigned long fid:5,
-			vid:5,
-			sgtc:20,
-			res1:2;
-	} bits;
-	unsigned long val;
-};
-#endif
-
-/* divide by 1000 to get VCore voltage in V. */
-static const int mobile_vid_table[32] = {
-    2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
-    1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
-    1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
-    1075, 1050, 1025, 1000, 975, 950, 925, 0,
-};
-
-/* divide by 10 to get FID. */
-static const int fid_codes[32] = {
-    110, 115, 120, 125, 50, 55, 60, 65,
-    70, 75, 80, 85, 90, 95, 100, 105,
-    30, 190, 40, 200, 130, 135, 140, 210,
-    150, 225, 160, 165, 170, 180, -1, -1,
-};
-
-/* This parameter is used in order to force ACPI instead of legacy method for
- * configuration purpose.
- */
-
-static int acpi_force;
-
-static struct cpufreq_frequency_table *powernow_table;
-
-static unsigned int can_scale_bus;
-static unsigned int can_scale_vid;
-static unsigned int minimum_speed = -1;
-static unsigned int maximum_speed;
-static unsigned int number_scales;
-static unsigned int fsb;
-static unsigned int latency;
-static char have_a0;
-
-static int check_fsb(unsigned int fsbspeed)
-{
-	int delta;
-	unsigned int f = fsb / 1000;
-
-	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
-	return delta < 5;
-}
-
-static int check_powernow(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	unsigned int maxei, eax, ebx, ecx, edx;
-
-	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
-#ifdef MODULE
-		printk(KERN_INFO PFX "This module only works with "
-				"AMD K7 CPUs\n");
-#endif
-		return 0;
-	}
-
-	/* Get maximum capabilities */
-	maxei = cpuid_eax(0x80000000);
-	if (maxei < 0x80000007) {	/* Any powernow info ? */
-#ifdef MODULE
-		printk(KERN_INFO PFX "No powernow capabilities detected\n");
-#endif
-		return 0;
-	}
-
-	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
-		printk(KERN_INFO PFX "K7 660[A0] core detected, "
-				"enabling errata workarounds\n");
-		have_a0 = 1;
-	}
-
-	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
-
-	/* Check we can actually do something before we say anything.*/
-	if (!(edx & (1 << 1 | 1 << 2)))
-		return 0;
-
-	printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
-
-	if (edx & 1 << 1) {
-		printk("frequency");
-		can_scale_bus = 1;
-	}
-
-	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
-		printk(" and ");
-
-	if (edx & 1 << 2) {
-		printk("voltage");
-		can_scale_vid = 1;
-	}
-
-	printk(".\n");
-	return 1;
-}
-
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-static void invalidate_entry(unsigned int entry)
-{
-	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
-}
-#endif
-
-static int get_ranges(unsigned char *pst)
-{
-	unsigned int j;
-	unsigned int speed;
-	u8 fid, vid;
-
-	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
-				(number_scales + 1)), GFP_KERNEL);
-	if (!powernow_table)
-		return -ENOMEM;
-
-	for (j = 0 ; j < number_scales; j++) {
-		fid = *pst++;
-
-		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
-		powernow_table[j].index = fid; /* lower 8 bits */
-
-		speed = powernow_table[j].frequency;
-
-		if ((fid_codes[fid] % 10) == 5) {
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-			if (have_a0 == 1)
-				invalidate_entry(j);
-#endif
-		}
-
-		if (speed < minimum_speed)
-			minimum_speed = speed;
-		if (speed > maximum_speed)
-			maximum_speed = speed;
-
-		vid = *pst++;
-		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
-
-		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
-			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
-			 fid_codes[fid] % 10, speed/1000, vid,
-			 mobile_vid_table[vid]/1000,
-			 mobile_vid_table[vid]%1000);
-	}
-	powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
-	powernow_table[number_scales].index = 0;
-
-	return 0;
-}
-
-
-static void change_FID(int fid)
-{
-	union msr_fidvidctl fidvidctl;
-
-	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
-	if (fidvidctl.bits.FID != fid) {
-		fidvidctl.bits.SGTC = latency;
-		fidvidctl.bits.FID = fid;
-		fidvidctl.bits.VIDC = 0;
-		fidvidctl.bits.FIDC = 1;
-		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
-	}
-}
-
-
-static void change_VID(int vid)
-{
-	union msr_fidvidctl fidvidctl;
-
-	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
-	if (fidvidctl.bits.VID != vid) {
-		fidvidctl.bits.SGTC = latency;
-		fidvidctl.bits.VID = vid;
-		fidvidctl.bits.FIDC = 0;
-		fidvidctl.bits.VIDC = 1;
-		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
-	}
-}
-
-
-static void change_speed(unsigned int index)
-{
-	u8 fid, vid;
-	struct cpufreq_freqs freqs;
-	union msr_fidvidstatus fidvidstatus;
-	int cfid;
-
-	/* fid are the lower 8 bits of the index we stored into
-	 * the cpufreq frequency table in powernow_decode_bios,
-	 * vid are the upper 8 bits.
-	 */
-
-	fid = powernow_table[index].index & 0xFF;
-	vid = (powernow_table[index].index & 0xFF00) >> 8;
-
-	freqs.cpu = 0;
-
-	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
-	cfid = fidvidstatus.bits.CFID;
-	freqs.old = fsb * fid_codes[cfid] / 10;
-
-	freqs.new = powernow_table[index].frequency;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Now do the magic poking into the MSRs.  */
-
-	if (have_a0 == 1)	/* A0 errata 5 */
-		local_irq_disable();
-
-	if (freqs.old > freqs.new) {
-		/* Going down, so change FID first */
-		change_FID(fid);
-		change_VID(vid);
-	} else {
-		/* Going up, so change VID first */
-		change_VID(vid);
-		change_FID(fid);
-	}
-
-
-	if (have_a0 == 1)
-		local_irq_enable();
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-}
-
-
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-
-static struct acpi_processor_performance *acpi_processor_perf;
-
-static int powernow_acpi_init(void)
-{
-	int i;
-	int retval = 0;
-	union powernow_acpi_control_t pc;
-
-	if (acpi_processor_perf != NULL && powernow_table != NULL) {
-		retval = -EINVAL;
-		goto err0;
-	}
-
-	acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance),
-				      GFP_KERNEL);
-	if (!acpi_processor_perf) {
-		retval = -ENOMEM;
-		goto err0;
-	}
-
-	if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
-								GFP_KERNEL)) {
-		retval = -ENOMEM;
-		goto err05;
-	}
-
-	if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
-		retval = -EIO;
-		goto err1;
-	}
-
-	if (acpi_processor_perf->control_register.space_id !=
-			ACPI_ADR_SPACE_FIXED_HARDWARE) {
-		retval = -ENODEV;
-		goto err2;
-	}
-
-	if (acpi_processor_perf->status_register.space_id !=
-			ACPI_ADR_SPACE_FIXED_HARDWARE) {
-		retval = -ENODEV;
-		goto err2;
-	}
-
-	number_scales = acpi_processor_perf->state_count;
-
-	if (number_scales < 2) {
-		retval = -ENODEV;
-		goto err2;
-	}
-
-	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
-				(number_scales + 1)), GFP_KERNEL);
-	if (!powernow_table) {
-		retval = -ENOMEM;
-		goto err2;
-	}
-
-	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
-	for (i = 0; i < number_scales; i++) {
-		u8 fid, vid;
-		struct acpi_processor_px *state =
-			&acpi_processor_perf->states[i];
-		unsigned int speed, speed_mhz;
-
-		pc.val = (unsigned long) state->control;
-		pr_debug("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
-			 i,
-			 (u32) state->core_frequency,
-			 (u32) state->power,
-			 (u32) state->transition_latency,
-			 (u32) state->control,
-			 pc.bits.sgtc);
-
-		vid = pc.bits.vid;
-		fid = pc.bits.fid;
-
-		powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
-		powernow_table[i].index = fid; /* lower 8 bits */
-		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
-
-		speed = powernow_table[i].frequency;
-		speed_mhz = speed / 1000;
-
-		/* processor_perflib will multiply the MHz value by 1000 to
-		 * get a KHz value (e.g. 1266000). However, powernow-k7 works
-		 * with true KHz values (e.g. 1266768). To ensure that all
-		 * powernow frequencies are available, we must ensure that
-		 * ACPI doesn't restrict them, so we round up the MHz value
-		 * to ensure that perflib's computed KHz value is greater than
-		 * or equal to powernow's KHz value.
-		 */
-		if (speed % 1000 > 0)
-			speed_mhz++;
-
-		if ((fid_codes[fid] % 10) == 5) {
-			if (have_a0 == 1)
-				invalidate_entry(i);
-		}
-
-		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
-			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
-			 fid_codes[fid] % 10, speed_mhz, vid,
-			 mobile_vid_table[vid]/1000,
-			 mobile_vid_table[vid]%1000);
-
-		if (state->core_frequency != speed_mhz) {
-			state->core_frequency = speed_mhz;
-			pr_debug("   Corrected ACPI frequency to %d\n",
-				speed_mhz);
-		}
-
-		if (latency < pc.bits.sgtc)
-			latency = pc.bits.sgtc;
-
-		if (speed < minimum_speed)
-			minimum_speed = speed;
-		if (speed > maximum_speed)
-			maximum_speed = speed;
-	}
-
-	powernow_table[i].frequency = CPUFREQ_TABLE_END;
-	powernow_table[i].index = 0;
-
-	/* notify BIOS that we exist */
-	acpi_processor_notify_smm(THIS_MODULE);
-
-	return 0;
-
-err2:
-	acpi_processor_unregister_performance(acpi_processor_perf, 0);
-err1:
-	free_cpumask_var(acpi_processor_perf->shared_cpu_map);
-err05:
-	kfree(acpi_processor_perf);
-err0:
-	printk(KERN_WARNING PFX "ACPI perflib can not be used on "
-			"this platform\n");
-	acpi_processor_perf = NULL;
-	return retval;
-}
-#else
-static int powernow_acpi_init(void)
-{
-	printk(KERN_INFO PFX "no support for ACPI processor found."
-	       "  Please recompile your kernel with ACPI processor\n");
-	return -EINVAL;
-}
-#endif
-
-static void print_pst_entry(struct pst_s *pst, unsigned int j)
-{
-	pr_debug("PST:%d (@%p)\n", j, pst);
-	pr_debug(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
-		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
-}
-
-static int powernow_decode_bios(int maxfid, int startvid)
-{
-	struct psb_s *psb;
-	struct pst_s *pst;
-	unsigned int i, j;
-	unsigned char *p;
-	unsigned int etuple;
-	unsigned int ret;
-
-	etuple = cpuid_eax(0x80000001);
-
-	for (i = 0xC0000; i < 0xffff0 ; i += 16) {
-
-		p = phys_to_virt(i);
-
-		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
-			pr_debug("Found PSB header at %p\n", p);
-			psb = (struct psb_s *) p;
-			pr_debug("Table version: 0x%x\n", psb->tableversion);
-			if (psb->tableversion != 0x12) {
-				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
-						" supported right now\n");
-				return -ENODEV;
-			}
-
-			pr_debug("Flags: 0x%x\n", psb->flags);
-			if ((psb->flags & 1) == 0)
-				pr_debug("Mobile voltage regulator\n");
-			else
-				pr_debug("Desktop voltage regulator\n");
-
-			latency = psb->settlingtime;
-			if (latency < 100) {
-				printk(KERN_INFO PFX "BIOS set settling time "
-						"to %d microseconds. "
-						"Should be at least 100. "
-						"Correcting.\n", latency);
-				latency = 100;
-			}
-			pr_debug("Settling Time: %d microseconds.\n",
-					psb->settlingtime);
-			pr_debug("Has %d PST tables. (Only dumping ones "
-					"relevant to this CPU).\n",
-					psb->numpst);
-
-			p += sizeof(struct psb_s);
-
-			pst = (struct pst_s *) p;
-
-			for (j = 0; j < psb->numpst; j++) {
-				pst = (struct pst_s *) p;
-				number_scales = pst->numpstates;
-
-				if ((etuple == pst->cpuid) &&
-				    check_fsb(pst->fsbspeed) &&
-				    (maxfid == pst->maxfid) &&
-				    (startvid == pst->startvid)) {
-					print_pst_entry(pst, j);
-					p = (char *)pst + sizeof(struct pst_s);
-					ret = get_ranges(p);
-					return ret;
-				} else {
-					unsigned int k;
-					p = (char *)pst + sizeof(struct pst_s);
-					for (k = 0; k < number_scales; k++)
-						p += 2;
-				}
-			}
-			printk(KERN_INFO PFX "No PST tables match this cpuid "
-					"(0x%x)\n", etuple);
-			printk(KERN_INFO PFX "This is indicative of a broken "
-					"BIOS.\n");
-
-			return -EINVAL;
-		}
-		p++;
-	}
-
-	return -ENODEV;
-}
-
-
-static int powernow_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int newstate;
-
-	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
-				relation, &newstate))
-		return -EINVAL;
-
-	change_speed(newstate);
-
-	return 0;
-}
-
-
-static int powernow_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, powernow_table);
-}
-
-/*
- * We use the fact that the bus frequency is somehow
- * a multiple of 100000/3 khz, then we compute sgtc according
- * to this multiple.
- * That way, we match more how AMD thinks all of that work.
- * We will then get the same kind of behaviour already tested under
- * the "well-known" other OS.
- */
-static int __cpuinit fixup_sgtc(void)
-{
-	unsigned int sgtc;
-	unsigned int m;
-
-	m = fsb / 3333;
-	if ((m % 10) >= 5)
-		m += 5;
-
-	m /= 10;
-
-	sgtc = 100 * m * latency;
-	sgtc = sgtc / 3;
-	if (sgtc > 0xfffff) {
-		printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
-		sgtc = 0xfffff;
-	}
-	return sgtc;
-}
-
-static unsigned int powernow_get(unsigned int cpu)
-{
-	union msr_fidvidstatus fidvidstatus;
-	unsigned int cfid;
-
-	if (cpu)
-		return 0;
-	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
-	cfid = fidvidstatus.bits.CFID;
-
-	return fsb * fid_codes[cfid] / 10;
-}
-
-
-static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d)
-{
-	printk(KERN_WARNING PFX
-		"%s laptop with broken PST tables in BIOS detected.\n",
-		d->ident);
-	printk(KERN_WARNING PFX
-		"You need to downgrade to 3A21 (09/09/2002), or try a newer "
-		"BIOS than 3A71 (01/20/2003)\n");
-	printk(KERN_WARNING PFX
-		"cpufreq scaling has been disabled as a result of this.\n");
-	return 0;
-}
-
-/*
- * Some Athlon laptops have really fucked PST tables.
- * A BIOS update is all that can save them.
- * Mention this, and disable cpufreq.
- */
-static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = {
-	{
-		.callback = acer_cpufreq_pst,
-		.ident = "Acer Aspire",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
-			DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
-		},
-	},
-	{ }
-};
-
-static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy)
-{
-	union msr_fidvidstatus fidvidstatus;
-	int result;
-
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
-
-	recalibrate_cpu_khz();
-
-	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
-	if (!fsb) {
-		printk(KERN_WARNING PFX "can not determine bus frequency\n");
-		return -EINVAL;
-	}
-	pr_debug("FSB: %3dMHz\n", fsb/1000);
-
-	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
-		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
-				"Trying ACPI instead\n");
-		result = powernow_acpi_init();
-	} else {
-		result = powernow_decode_bios(fidvidstatus.bits.MFID,
-				fidvidstatus.bits.SVID);
-		if (result) {
-			printk(KERN_INFO PFX "Trying ACPI perflib\n");
-			maximum_speed = 0;
-			minimum_speed = -1;
-			latency = 0;
-			result = powernow_acpi_init();
-			if (result) {
-				printk(KERN_INFO PFX
-					"ACPI and legacy methods failed\n");
-			}
-		} else {
-			/* SGTC use the bus clock as timer */
-			latency = fixup_sgtc();
-			printk(KERN_INFO PFX "SGTC: %d\n", latency);
-		}
-	}
-
-	if (result)
-		return result;
-
-	printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
-				minimum_speed/1000, maximum_speed/1000);
-
-	policy->cpuinfo.transition_latency =
-		cpufreq_scale(2000000UL, fsb, latency);
-
-	policy->cur = powernow_get(0);
-
-	cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);
-
-	return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
-}
-
-static int powernow_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-	if (acpi_processor_perf) {
-		acpi_processor_unregister_performance(acpi_processor_perf, 0);
-		free_cpumask_var(acpi_processor_perf->shared_cpu_map);
-		kfree(acpi_processor_perf);
-	}
-#endif
-
-	kfree(powernow_table);
-	return 0;
-}
-
-static struct freq_attr *powernow_table_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver powernow_driver = {
-	.verify		= powernow_verify,
-	.target		= powernow_target,
-	.get		= powernow_get,
-#ifdef CONFIG_X86_POWERNOW_K7_ACPI
-	.bios_limit	= acpi_processor_get_bios_limit,
-#endif
-	.init		= powernow_cpu_init,
-	.exit		= powernow_cpu_exit,
-	.name		= "powernow-k7",
-	.owner		= THIS_MODULE,
-	.attr		= powernow_table_attr,
-};
-
-static int __init powernow_init(void)
-{
-	if (check_powernow() == 0)
-		return -ENODEV;
-	return cpufreq_register_driver(&powernow_driver);
-}
-
-
-static void __exit powernow_exit(void)
-{
-	cpufreq_unregister_driver(&powernow_driver);
-}
-
-module_param(acpi_force,  int, 0444);
-MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
-
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
-MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
-MODULE_LICENSE("GPL");
-
-late_initcall(powernow_init);
-module_exit(powernow_exit);
-
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
deleted file mode 100644
index 35fb4ea..0000000
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  (C) 2003 Dave Jones.
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  AMD-specific information
- *
- */
-
-union msr_fidvidctl {
-	struct {
-		unsigned FID:5,			// 4:0
-		reserved1:3,	// 7:5
-		VID:5,			// 12:8
-		reserved2:3,	// 15:13
-		FIDC:1,			// 16
-		VIDC:1,			// 17
-		reserved3:2,	// 19:18
-		FIDCHGRATIO:1,	// 20
-		reserved4:11,	// 31-21
-		SGTC:20,		// 32:51
-		reserved5:12;	// 63:52
-	} bits;
-	unsigned long long val;
-};
-
-union msr_fidvidstatus {
-	struct {
-		unsigned CFID:5,			// 4:0
-		reserved1:3,	// 7:5
-		SFID:5,			// 12:8
-		reserved2:3,	// 15:13
-		MFID:5,			// 20:16
-		reserved3:11,	// 31:21
-		CVID:5,			// 36:32
-		reserved4:3,	// 39:37
-		SVID:5,			// 44:40
-		reserved5:3,	// 47:45
-		MVID:5,			// 52:48
-		reserved6:11;	// 63:53
-	} bits;
-	unsigned long long val;
-};
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
deleted file mode 100644
index 83479b6..0000000
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ /dev/null
@@ -1,1607 +0,0 @@
-/*
- *   (c) 2003-2010 Advanced Micro Devices, Inc.
- *  Your use of this code is subject to the terms and conditions of the
- *  GNU general public license version 2. See "COPYING" or
- *  http://www.gnu.org/licenses/gpl.html
- *
- *  Support : mark.langsdorf@amd.com
- *
- *  Based on the powernow-k7.c module written by Dave Jones.
- *  (C) 2003 Dave Jones on behalf of SuSE Labs
- *  (C) 2004 Dominik Brodowski <linux@brodo.de>
- *  (C) 2004 Pavel Machek <pavel@ucw.cz>
- *  Licensed under the terms of the GNU GPL License version 2.
- *  Based upon datasheets & sample CPUs kindly provided by AMD.
- *
- *  Valuable input gratefully received from Dave Jones, Pavel Machek,
- *  Dominik Brodowski, Jacob Shin, and others.
- *  Originally developed by Paul Devriendt.
- *  Processor information obtained from Chapter 9 (Power and Thermal Management)
- *  of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
- *  Opteron Processors" available for download from www.amd.com
- *
- *  Tables for specific CPUs can be inferred from
- *     http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/cpumask.h>
-#include <linux/sched.h>	/* for current / set_cpus_allowed() */
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/msr.h>
-
-#include <linux/acpi.h>
-#include <linux/mutex.h>
-#include <acpi/processor.h>
-
-#define PFX "powernow-k8: "
-#define VERSION "version 2.20.00"
-#include "powernow-k8.h"
-#include "mperf.h"
-
-/* serialize freq changes  */
-static DEFINE_MUTEX(fidvid_mutex);
-
-static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
-
-static int cpu_family = CPU_OPTERON;
-
-/* core performance boost */
-static bool cpb_capable, cpb_enabled;
-static struct msr __percpu *msrs;
-
-static struct cpufreq_driver cpufreq_amd64_driver;
-
-#ifndef CONFIG_SMP
-static inline const struct cpumask *cpu_core_mask(int cpu)
-{
-	return cpumask_of(0);
-}
-#endif
-
-/* Return a frequency in MHz, given an input fid */
-static u32 find_freq_from_fid(u32 fid)
-{
-	return 800 + (fid * 100);
-}
-
-/* Return a frequency in KHz, given an input fid */
-static u32 find_khz_freq_from_fid(u32 fid)
-{
-	return 1000 * find_freq_from_fid(fid);
-}
-
-static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data,
-		u32 pstate)
-{
-	return data[pstate].frequency;
-}
-
-/* Return the vco fid for an input fid
- *
- * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
- * only from corresponding high fids. This returns "high" fid corresponding to
- * "low" one.
- */
-static u32 convert_fid_to_vco_fid(u32 fid)
-{
-	if (fid < HI_FID_TABLE_BOTTOM)
-		return 8 + (2 * fid);
-	else
-		return fid;
-}
-
-/*
- * Return 1 if the pending bit is set. Unless we just instructed the processor
- * to transition to a new state, seeing this bit set is really bad news.
- */
-static int pending_bit_stuck(void)
-{
-	u32 lo, hi;
-
-	if (cpu_family == CPU_HW_PSTATE)
-		return 0;
-
-	rdmsr(MSR_FIDVID_STATUS, lo, hi);
-	return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
-}
-
-/*
- * Update the global current fid / vid values from the status msr.
- * Returns 1 on error.
- */
-static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
-{
-	u32 lo, hi;
-	u32 i = 0;
-
-	if (cpu_family == CPU_HW_PSTATE) {
-		rdmsr(MSR_PSTATE_STATUS, lo, hi);
-		i = lo & HW_PSTATE_MASK;
-		data->currpstate = i;
-
-		/*
-		 * a workaround for family 11h erratum 311 might cause
-		 * an "out-of-range Pstate if the core is in Pstate-0
-		 */
-		if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps))
-			data->currpstate = HW_PSTATE_0;
-
-		return 0;
-	}
-	do {
-		if (i++ > 10000) {
-			pr_debug("detected change pending stuck\n");
-			return 1;
-		}
-		rdmsr(MSR_FIDVID_STATUS, lo, hi);
-	} while (lo & MSR_S_LO_CHANGE_PENDING);
-
-	data->currvid = hi & MSR_S_HI_CURRENT_VID;
-	data->currfid = lo & MSR_S_LO_CURRENT_FID;
-
-	return 0;
-}
-
-/* the isochronous relief time */
-static void count_off_irt(struct powernow_k8_data *data)
-{
-	udelay((1 << data->irt) * 10);
-	return;
-}
-
-/* the voltage stabilization time */
-static void count_off_vst(struct powernow_k8_data *data)
-{
-	udelay(data->vstable * VST_UNITS_20US);
-	return;
-}
-
-/* need to init the control msr to a safe value (for each cpu) */
-static void fidvid_msr_init(void)
-{
-	u32 lo, hi;
-	u8 fid, vid;
-
-	rdmsr(MSR_FIDVID_STATUS, lo, hi);
-	vid = hi & MSR_S_HI_CURRENT_VID;
-	fid = lo & MSR_S_LO_CURRENT_FID;
-	lo = fid | (vid << MSR_C_LO_VID_SHIFT);
-	hi = MSR_C_HI_STP_GNT_BENIGN;
-	pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
-	wrmsr(MSR_FIDVID_CTL, lo, hi);
-}
-
-/* write the new fid value along with the other control fields to the msr */
-static int write_new_fid(struct powernow_k8_data *data, u32 fid)
-{
-	u32 lo;
-	u32 savevid = data->currvid;
-	u32 i = 0;
-
-	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
-		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
-		return 1;
-	}
-
-	lo = fid;
-	lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
-	lo |= MSR_C_LO_INIT_FID_VID;
-
-	pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
-		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
-
-	do {
-		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
-		if (i++ > 100) {
-			printk(KERN_ERR PFX
-				"Hardware error - pending bit very stuck - "
-				"no further pstate changes possible\n");
-			return 1;
-		}
-	} while (query_current_values_with_pending_wait(data));
-
-	count_off_irt(data);
-
-	if (savevid != data->currvid) {
-		printk(KERN_ERR PFX
-			"vid change on fid trans, old 0x%x, new 0x%x\n",
-			savevid, data->currvid);
-		return 1;
-	}
-
-	if (fid != data->currfid) {
-		printk(KERN_ERR PFX
-			"fid trans failed, fid 0x%x, curr 0x%x\n", fid,
-			data->currfid);
-		return 1;
-	}
-
-	return 0;
-}
-
-/* Write a new vid to the hardware */
-static int write_new_vid(struct powernow_k8_data *data, u32 vid)
-{
-	u32 lo;
-	u32 savefid = data->currfid;
-	int i = 0;
-
-	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
-		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
-		return 1;
-	}
-
-	lo = data->currfid;
-	lo |= (vid << MSR_C_LO_VID_SHIFT);
-	lo |= MSR_C_LO_INIT_FID_VID;
-
-	pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
-		vid, lo, STOP_GRANT_5NS);
-
-	do {
-		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
-		if (i++ > 100) {
-			printk(KERN_ERR PFX "internal error - pending bit "
-					"very stuck - no further pstate "
-					"changes possible\n");
-			return 1;
-		}
-	} while (query_current_values_with_pending_wait(data));
-
-	if (savefid != data->currfid) {
-		printk(KERN_ERR PFX "fid changed on vid trans, old "
-			"0x%x new 0x%x\n",
-		       savefid, data->currfid);
-		return 1;
-	}
-
-	if (vid != data->currvid) {
-		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, "
-				"curr 0x%x\n",
-				vid, data->currvid);
-		return 1;
-	}
-
-	return 0;
-}
-
-/*
- * Reduce the vid by the max of step or reqvid.
- * Decreasing vid codes represent increasing voltages:
- * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
- */
-static int decrease_vid_code_by_step(struct powernow_k8_data *data,
-		u32 reqvid, u32 step)
-{
-	if ((data->currvid - reqvid) > step)
-		reqvid = data->currvid - step;
-
-	if (write_new_vid(data, reqvid))
-		return 1;
-
-	count_off_vst(data);
-
-	return 0;
-}
-
-/* Change hardware pstate by single MSR write */
-static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
-{
-	wrmsr(MSR_PSTATE_CTRL, pstate, 0);
-	data->currpstate = pstate;
-	return 0;
-}
-
-/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
-static int transition_fid_vid(struct powernow_k8_data *data,
-		u32 reqfid, u32 reqvid)
-{
-	if (core_voltage_pre_transition(data, reqvid, reqfid))
-		return 1;
-
-	if (core_frequency_transition(data, reqfid))
-		return 1;
-
-	if (core_voltage_post_transition(data, reqvid))
-		return 1;
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
-
-	if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
-		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, "
-				"curr 0x%x 0x%x\n",
-				smp_processor_id(),
-				reqfid, reqvid, data->currfid, data->currvid);
-		return 1;
-	}
-
-	pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
-		smp_processor_id(), data->currfid, data->currvid);
-
-	return 0;
-}
-
-/* Phase 1 - core voltage transition ... setup voltage */
-static int core_voltage_pre_transition(struct powernow_k8_data *data,
-		u32 reqvid, u32 reqfid)
-{
-	u32 rvosteps = data->rvo;
-	u32 savefid = data->currfid;
-	u32 maxvid, lo, rvomult = 1;
-
-	pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
-		"reqvid 0x%x, rvo 0x%x\n",
-		smp_processor_id(),
-		data->currfid, data->currvid, reqvid, data->rvo);
-
-	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
-		rvomult = 2;
-	rvosteps *= rvomult;
-	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
-	maxvid = 0x1f & (maxvid >> 16);
-	pr_debug("ph1 maxvid=0x%x\n", maxvid);
-	if (reqvid < maxvid) /* lower numbers are higher voltages */
-		reqvid = maxvid;
-
-	while (data->currvid > reqvid) {
-		pr_debug("ph1: curr 0x%x, req vid 0x%x\n",
-			data->currvid, reqvid);
-		if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
-			return 1;
-	}
-
-	while ((rvosteps > 0) &&
-			((rvomult * data->rvo + data->currvid) > reqvid)) {
-		if (data->currvid == maxvid) {
-			rvosteps = 0;
-		} else {
-			pr_debug("ph1: changing vid for rvo, req 0x%x\n",
-				data->currvid - 1);
-			if (decrease_vid_code_by_step(data, data->currvid-1, 1))
-				return 1;
-			rvosteps--;
-		}
-	}
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
-
-	if (savefid != data->currfid) {
-		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n",
-				data->currfid);
-		return 1;
-	}
-
-	pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n",
-		data->currfid, data->currvid);
-
-	return 0;
-}
-
-/* Phase 2 - core frequency transition */
-static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
-{
-	u32 vcoreqfid, vcocurrfid, vcofiddiff;
-	u32 fid_interval, savevid = data->currvid;
-
-	if (data->currfid == reqfid) {
-		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
-				data->currfid);
-		return 0;
-	}
-
-	pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
-		"reqfid 0x%x\n",
-		smp_processor_id(),
-		data->currfid, data->currvid, reqfid);
-
-	vcoreqfid = convert_fid_to_vco_fid(reqfid);
-	vcocurrfid = convert_fid_to_vco_fid(data->currfid);
-	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
-	    : vcoreqfid - vcocurrfid;
-
-	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
-		vcofiddiff = 0;
-
-	while (vcofiddiff > 2) {
-		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
-
-		if (reqfid > data->currfid) {
-			if (data->currfid > LO_FID_TABLE_TOP) {
-				if (write_new_fid(data,
-						data->currfid + fid_interval))
-					return 1;
-			} else {
-				if (write_new_fid
-				    (data,
-				     2 + convert_fid_to_vco_fid(data->currfid)))
-					return 1;
-			}
-		} else {
-			if (write_new_fid(data, data->currfid - fid_interval))
-				return 1;
-		}
-
-		vcocurrfid = convert_fid_to_vco_fid(data->currfid);
-		vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
-		    : vcoreqfid - vcocurrfid;
-	}
-
-	if (write_new_fid(data, reqfid))
-		return 1;
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
-
-	if (data->currfid != reqfid) {
-		printk(KERN_ERR PFX
-			"ph2: mismatch, failed fid transition, "
-			"curr 0x%x, req 0x%x\n",
-			data->currfid, reqfid);
-		return 1;
-	}
-
-	if (savevid != data->currvid) {
-		printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n",
-			savevid, data->currvid);
-		return 1;
-	}
-
-	pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n",
-		data->currfid, data->currvid);
-
-	return 0;
-}
-
-/* Phase 3 - core voltage transition flow ... jump to the final vid. */
-static int core_voltage_post_transition(struct powernow_k8_data *data,
-		u32 reqvid)
-{
-	u32 savefid = data->currfid;
-	u32 savereqvid = reqvid;
-
-	pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
-		smp_processor_id(),
-		data->currfid, data->currvid);
-
-	if (reqvid != data->currvid) {
-		if (write_new_vid(data, reqvid))
-			return 1;
-
-		if (savefid != data->currfid) {
-			printk(KERN_ERR PFX
-			       "ph3: bad fid change, save 0x%x, curr 0x%x\n",
-			       savefid, data->currfid);
-			return 1;
-		}
-
-		if (data->currvid != reqvid) {
-			printk(KERN_ERR PFX
-			       "ph3: failed vid transition\n, "
-			       "req 0x%x, curr 0x%x",
-			       reqvid, data->currvid);
-			return 1;
-		}
-	}
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
-
-	if (savereqvid != data->currvid) {
-		pr_debug("ph3 failed, currvid 0x%x\n", data->currvid);
-		return 1;
-	}
-
-	if (savefid != data->currfid) {
-		pr_debug("ph3 failed, currfid changed 0x%x\n",
-			data->currfid);
-		return 1;
-	}
-
-	pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n",
-		data->currfid, data->currvid);
-
-	return 0;
-}
-
-static void check_supported_cpu(void *_rc)
-{
-	u32 eax, ebx, ecx, edx;
-	int *rc = _rc;
-
-	*rc = -ENODEV;
-
-	if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD)
-		return;
-
-	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-	if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
-	    ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
-		return;
-
-	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
-		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
-		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
-			printk(KERN_INFO PFX
-				"Processor cpuid %x not supported\n", eax);
-			return;
-		}
-
-		eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
-		if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
-			printk(KERN_INFO PFX
-			       "No frequency change capabilities detected\n");
-			return;
-		}
-
-		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
-		if ((edx & P_STATE_TRANSITION_CAPABLE)
-			!= P_STATE_TRANSITION_CAPABLE) {
-			printk(KERN_INFO PFX
-				"Power state transitions not supported\n");
-			return;
-		}
-	} else { /* must be a HW Pstate capable processor */
-		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
-		if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE)
-			cpu_family = CPU_HW_PSTATE;
-		else
-			return;
-	}
-
-	*rc = 0;
-}
-
-static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
-		u8 maxvid)
-{
-	unsigned int j;
-	u8 lastfid = 0xff;
-
-	for (j = 0; j < data->numps; j++) {
-		if (pst[j].vid > LEAST_VID) {
-			printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n",
-			       j, pst[j].vid);
-			return -EINVAL;
-		}
-		if (pst[j].vid < data->rvo) {
-			/* vid + rvo >= 0 */
-			printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
-			       " %d\n", j);
-			return -ENODEV;
-		}
-		if (pst[j].vid < maxvid + data->rvo) {
-			/* vid + rvo >= maxvid */
-			printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
-			       " %d\n", j);
-			return -ENODEV;
-		}
-		if (pst[j].fid > MAX_FID) {
-			printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate"
-			       " %d\n", j);
-			return -ENODEV;
-		}
-		if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
-			/* Only first fid is allowed to be in "low" range */
-			printk(KERN_ERR FW_BUG PFX "two low fids - %d : "
-			       "0x%x\n", j, pst[j].fid);
-			return -EINVAL;
-		}
-		if (pst[j].fid < lastfid)
-			lastfid = pst[j].fid;
-	}
-	if (lastfid & 1) {
-		printk(KERN_ERR FW_BUG PFX "lastfid invalid\n");
-		return -EINVAL;
-	}
-	if (lastfid > LO_FID_TABLE_TOP)
-		printk(KERN_INFO FW_BUG PFX
-			"first fid not from lo freq table\n");
-
-	return 0;
-}
-
-static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
-		unsigned int entry)
-{
-	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
-}
-
-static void print_basics(struct powernow_k8_data *data)
-{
-	int j;
-	for (j = 0; j < data->numps; j++) {
-		if (data->powernow_table[j].frequency !=
-				CPUFREQ_ENTRY_INVALID) {
-			if (cpu_family == CPU_HW_PSTATE) {
-				printk(KERN_INFO PFX
-					"   %d : pstate %d (%d MHz)\n", j,
-					data->powernow_table[j].index,
-					data->powernow_table[j].frequency/1000);
-			} else {
-				printk(KERN_INFO PFX
-					"fid 0x%x (%d MHz), vid 0x%x\n",
-					data->powernow_table[j].index & 0xff,
-					data->powernow_table[j].frequency/1000,
-					data->powernow_table[j].index >> 8);
-			}
-		}
-	}
-	if (data->batps)
-		printk(KERN_INFO PFX "Only %d pstates on battery\n",
-				data->batps);
-}
-
-static u32 freq_from_fid_did(u32 fid, u32 did)
-{
-	u32 mhz = 0;
-
-	if (boot_cpu_data.x86 == 0x10)
-		mhz = (100 * (fid + 0x10)) >> did;
-	else if (boot_cpu_data.x86 == 0x11)
-		mhz = (100 * (fid + 8)) >> did;
-	else
-		BUG();
-
-	return mhz * 1000;
-}
-
-static int fill_powernow_table(struct powernow_k8_data *data,
-		struct pst_s *pst, u8 maxvid)
-{
-	struct cpufreq_frequency_table *powernow_table;
-	unsigned int j;
-
-	if (data->batps) {
-		/* use ACPI support to get full speed on mains power */
-		printk(KERN_WARNING PFX
-			"Only %d pstates usable (use ACPI driver for full "
-			"range\n", data->batps);
-		data->numps = data->batps;
-	}
-
-	for (j = 1; j < data->numps; j++) {
-		if (pst[j-1].fid >= pst[j].fid) {
-			printk(KERN_ERR PFX "PST out of sequence\n");
-			return -EINVAL;
-		}
-	}
-
-	if (data->numps < 2) {
-		printk(KERN_ERR PFX "no p states to transition\n");
-		return -ENODEV;
-	}
-
-	if (check_pst_table(data, pst, maxvid))
-		return -EINVAL;
-
-	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
-		* (data->numps + 1)), GFP_KERNEL);
-	if (!powernow_table) {
-		printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
-		return -ENOMEM;
-	}
-
-	for (j = 0; j < data->numps; j++) {
-		int freq;
-		powernow_table[j].index = pst[j].fid; /* lower 8 bits */
-		powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
-		freq = find_khz_freq_from_fid(pst[j].fid);
-		powernow_table[j].frequency = freq;
-	}
-	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
-	powernow_table[data->numps].index = 0;
-
-	if (query_current_values_with_pending_wait(data)) {
-		kfree(powernow_table);
-		return -EIO;
-	}
-
-	pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
-	data->powernow_table = powernow_table;
-	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
-		print_basics(data);
-
-	for (j = 0; j < data->numps; j++)
-		if ((pst[j].fid == data->currfid) &&
-		    (pst[j].vid == data->currvid))
-			return 0;
-
-	pr_debug("currfid/vid do not match PST, ignoring\n");
-	return 0;
-}
-
-/* Find and validate the PSB/PST table in BIOS. */
-static int find_psb_table(struct powernow_k8_data *data)
-{
-	struct psb_s *psb;
-	unsigned int i;
-	u32 mvs;
-	u8 maxvid;
-	u32 cpst = 0;
-	u32 thiscpuid;
-
-	for (i = 0xc0000; i < 0xffff0; i += 0x10) {
-		/* Scan BIOS looking for the signature. */
-		/* It can not be at ffff0 - it is too big. */
-
-		psb = phys_to_virt(i);
-		if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
-			continue;
-
-		pr_debug("found PSB header at 0x%p\n", psb);
-
-		pr_debug("table vers: 0x%x\n", psb->tableversion);
-		if (psb->tableversion != PSB_VERSION_1_4) {
-			printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
-			return -ENODEV;
-		}
-
-		pr_debug("flags: 0x%x\n", psb->flags1);
-		if (psb->flags1) {
-			printk(KERN_ERR FW_BUG PFX "unknown flags\n");
-			return -ENODEV;
-		}
-
-		data->vstable = psb->vstable;
-		pr_debug("voltage stabilization time: %d(*20us)\n",
-				data->vstable);
-
-		pr_debug("flags2: 0x%x\n", psb->flags2);
-		data->rvo = psb->flags2 & 3;
-		data->irt = ((psb->flags2) >> 2) & 3;
-		mvs = ((psb->flags2) >> 4) & 3;
-		data->vidmvs = 1 << mvs;
-		data->batps = ((psb->flags2) >> 6) & 3;
-
-		pr_debug("ramp voltage offset: %d\n", data->rvo);
-		pr_debug("isochronous relief time: %d\n", data->irt);
-		pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
-
-		pr_debug("numpst: 0x%x\n", psb->num_tables);
-		cpst = psb->num_tables;
-		if ((psb->cpuid == 0x00000fc0) ||
-		    (psb->cpuid == 0x00000fe0)) {
-			thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-			if ((thiscpuid == 0x00000fc0) ||
-			    (thiscpuid == 0x00000fe0))
-				cpst = 1;
-		}
-		if (cpst != 1) {
-			printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
-			return -ENODEV;
-		}
-
-		data->plllock = psb->plllocktime;
-		pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
-		pr_debug("maxfid: 0x%x\n", psb->maxfid);
-		pr_debug("maxvid: 0x%x\n", psb->maxvid);
-		maxvid = psb->maxvid;
-
-		data->numps = psb->numps;
-		pr_debug("numpstates: 0x%x\n", data->numps);
-		return fill_powernow_table(data,
-				(struct pst_s *)(psb+1), maxvid);
-	}
-	/*
-	 * If you see this message, complain to BIOS manufacturer. If
-	 * he tells you "we do not support Linux" or some similar
-	 * nonsense, remember that Windows 2000 uses the same legacy
-	 * mechanism that the old Linux PSB driver uses. Tell them it
-	 * is broken with Windows 2000.
-	 *
-	 * The reference to the AMD documentation is chapter 9 in the
-	 * BIOS and Kernel Developer's Guide, which is available on
-	 * www.amd.com
-	 */
-	printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
-	printk(KERN_ERR PFX "Make sure that your BIOS is up to date"
-		" and Cool'N'Quiet support is enabled in BIOS setup\n");
-	return -ENODEV;
-}
-
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
-		unsigned int index)
-{
-	u64 control;
-
-	if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
-		return;
-
-	control = data->acpi_data.states[index].control;
-	data->irt = (control >> IRT_SHIFT) & IRT_MASK;
-	data->rvo = (control >> RVO_SHIFT) & RVO_MASK;
-	data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
-	data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK;
-	data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK);
-	data->vstable = (control >> VST_SHIFT) & VST_MASK;
-}
-
-static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
-{
-	struct cpufreq_frequency_table *powernow_table;
-	int ret_val = -ENODEV;
-	u64 control, status;
-
-	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
-		pr_debug("register performance failed: bad ACPI data\n");
-		return -EIO;
-	}
-
-	/* verify the data contained in the ACPI structures */
-	if (data->acpi_data.state_count <= 1) {
-		pr_debug("No ACPI P-States\n");
-		goto err_out;
-	}
-
-	control = data->acpi_data.control_register.space_id;
-	status = data->acpi_data.status_register.space_id;
-
-	if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-	    (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
-		pr_debug("Invalid control/status registers (%llx - %llx)\n",
-			control, status);
-		goto err_out;
-	}
-
-	/* fill in data->powernow_table */
-	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
-		* (data->acpi_data.state_count + 1)), GFP_KERNEL);
-	if (!powernow_table) {
-		pr_debug("powernow_table memory alloc failure\n");
-		goto err_out;
-	}
-
-	/* fill in data */
-	data->numps = data->acpi_data.state_count;
-	powernow_k8_acpi_pst_values(data, 0);
-
-	if (cpu_family == CPU_HW_PSTATE)
-		ret_val = fill_powernow_table_pstate(data, powernow_table);
-	else
-		ret_val = fill_powernow_table_fidvid(data, powernow_table);
-	if (ret_val)
-		goto err_out_mem;
-
-	powernow_table[data->acpi_data.state_count].frequency =
-		CPUFREQ_TABLE_END;
-	powernow_table[data->acpi_data.state_count].index = 0;
-	data->powernow_table = powernow_table;
-
-	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
-		print_basics(data);
-
-	/* notify BIOS that we exist */
-	acpi_processor_notify_smm(THIS_MODULE);
-
-	if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
-		printk(KERN_ERR PFX
-				"unable to alloc powernow_k8_data cpumask\n");
-		ret_val = -ENOMEM;
-		goto err_out_mem;
-	}
-
-	return 0;
-
-err_out_mem:
-	kfree(powernow_table);
-
-err_out:
-	acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
-
-	/* data->acpi_data.state_count informs us at ->exit()
-	 * whether ACPI was used */
-	data->acpi_data.state_count = 0;
-
-	return ret_val;
-}
-
-static int fill_powernow_table_pstate(struct powernow_k8_data *data,
-		struct cpufreq_frequency_table *powernow_table)
-{
-	int i;
-	u32 hi = 0, lo = 0;
-	rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi);
-	data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
-
-	for (i = 0; i < data->acpi_data.state_count; i++) {
-		u32 index;
-
-		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
-		if (index > data->max_hw_pstate) {
-			printk(KERN_ERR PFX "invalid pstate %d - "
-					"bad value %d.\n", i, index);
-			printk(KERN_ERR PFX "Please report to BIOS "
-					"manufacturer\n");
-			invalidate_entry(powernow_table, i);
-			continue;
-		}
-		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
-		if (!(hi & HW_PSTATE_VALID_MASK)) {
-			pr_debug("invalid pstate %d, ignoring\n", index);
-			invalidate_entry(powernow_table, i);
-			continue;
-		}
-
-		powernow_table[i].index = index;
-
-		/* Frequency may be rounded for these */
-		if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
-				 || boot_cpu_data.x86 == 0x11) {
-			powernow_table[i].frequency =
-				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
-		} else
-			powernow_table[i].frequency =
-				data->acpi_data.states[i].core_frequency * 1000;
-	}
-	return 0;
-}
-
-static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
-		struct cpufreq_frequency_table *powernow_table)
-{
-	int i;
-
-	for (i = 0; i < data->acpi_data.state_count; i++) {
-		u32 fid;
-		u32 vid;
-		u32 freq, index;
-		u64 status, control;
-
-		if (data->exttype) {
-			status =  data->acpi_data.states[i].status;
-			fid = status & EXT_FID_MASK;
-			vid = (status >> VID_SHIFT) & EXT_VID_MASK;
-		} else {
-			control =  data->acpi_data.states[i].control;
-			fid = control & FID_MASK;
-			vid = (control >> VID_SHIFT) & VID_MASK;
-		}
-
-		pr_debug("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
-
-		index = fid | (vid<<8);
-		powernow_table[i].index = index;
-
-		freq = find_khz_freq_from_fid(fid);
-		powernow_table[i].frequency = freq;
-
-		/* verify frequency is OK */
-		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
-			pr_debug("invalid freq %u kHz, ignoring\n", freq);
-			invalidate_entry(powernow_table, i);
-			continue;
-		}
-
-		/* verify voltage is OK -
-		 * BIOSs are using "off" to indicate invalid */
-		if (vid == VID_OFF) {
-			pr_debug("invalid vid %u, ignoring\n", vid);
-			invalidate_entry(powernow_table, i);
-			continue;
-		}
-
-		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
-			printk(KERN_INFO PFX "invalid freq entries "
-				"%u kHz vs. %u kHz\n", freq,
-				(unsigned int)
-				(data->acpi_data.states[i].core_frequency
-				 * 1000));
-			invalidate_entry(powernow_table, i);
-			continue;
-		}
-	}
-	return 0;
-}
-
-static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
-{
-	if (data->acpi_data.state_count)
-		acpi_processor_unregister_performance(&data->acpi_data,
-				data->cpu);
-	free_cpumask_var(data->acpi_data.shared_cpu_map);
-}
-
-static int get_transition_latency(struct powernow_k8_data *data)
-{
-	int max_latency = 0;
-	int i;
-	for (i = 0; i < data->acpi_data.state_count; i++) {
-		int cur_latency = data->acpi_data.states[i].transition_latency
-			+ data->acpi_data.states[i].bus_master_latency;
-		if (cur_latency > max_latency)
-			max_latency = cur_latency;
-	}
-	if (max_latency == 0) {
-		/*
-		 * Fam 11h and later may return 0 as transition latency. This
-		 * is intended and means "very fast". While cpufreq core and
-		 * governors currently can handle that gracefully, better set it
-		 * to 1 to avoid problems in the future.
-		 */
-		if (boot_cpu_data.x86 < 0x11)
-			printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
-				"latency\n");
-		max_latency = 1;
-	}
-	/* value in usecs, needs to be in nanoseconds */
-	return 1000 * max_latency;
-}
-
-/* Take a frequency, and issue the fid/vid transition command */
-static int transition_frequency_fidvid(struct powernow_k8_data *data,
-		unsigned int index)
-{
-	u32 fid = 0;
-	u32 vid = 0;
-	int res, i;
-	struct cpufreq_freqs freqs;
-
-	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
-
-	/* fid/vid correctness check for k8 */
-	/* fid are the lower 8 bits of the index we stored into
-	 * the cpufreq frequency table in find_psb_table, vid
-	 * are the upper 8 bits.
-	 */
-	fid = data->powernow_table[index].index & 0xFF;
-	vid = (data->powernow_table[index].index & 0xFF00) >> 8;
-
-	pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
-
-	if ((data->currvid == vid) && (data->currfid == fid)) {
-		pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n",
-			fid, vid);
-		return 0;
-	}
-
-	pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n",
-		smp_processor_id(), fid, vid);
-	freqs.old = find_khz_freq_from_fid(data->currfid);
-	freqs.new = find_khz_freq_from_fid(fid);
-
-	for_each_cpu(i, data->available_cores) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
-
-	res = transition_fid_vid(data, fid, vid);
-	freqs.new = find_khz_freq_from_fid(data->currfid);
-
-	for_each_cpu(i, data->available_cores) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-	return res;
-}
-
-/* Take a frequency, and issue the hardware pstate transition command */
-static int transition_frequency_pstate(struct powernow_k8_data *data,
-		unsigned int index)
-{
-	u32 pstate = 0;
-	int res, i;
-	struct cpufreq_freqs freqs;
-
-	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
-
-	/* get MSR index for hardware pstate transition */
-	pstate = index & HW_PSTATE_MASK;
-	if (pstate > data->max_hw_pstate)
-		return 0;
-	freqs.old = find_khz_freq_from_pstate(data->powernow_table,
-			data->currpstate);
-	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
-
-	for_each_cpu(i, data->available_cores) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
-
-	res = transition_pstate(data, pstate);
-	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
-
-	for_each_cpu(i, data->available_cores) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-	return res;
-}
-
-/* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol,
-		unsigned targfreq, unsigned relation)
-{
-	cpumask_var_t oldmask;
-	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
-	u32 checkfid;
-	u32 checkvid;
-	unsigned int newstate;
-	int ret = -EIO;
-
-	if (!data)
-		return -EINVAL;
-
-	checkfid = data->currfid;
-	checkvid = data->currvid;
-
-	/* only run on specific CPU from here on. */
-	/* This is poor form: use a workqueue or smp_call_function_single */
-	if (!alloc_cpumask_var(&oldmask, GFP_KERNEL))
-		return -ENOMEM;
-
-	cpumask_copy(oldmask, tsk_cpus_allowed(current));
-	set_cpus_allowed_ptr(current, cpumask_of(pol->cpu));
-
-	if (smp_processor_id() != pol->cpu) {
-		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
-		goto err_out;
-	}
-
-	if (pending_bit_stuck()) {
-		printk(KERN_ERR PFX "failing targ, change pending bit set\n");
-		goto err_out;
-	}
-
-	pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
-		pol->cpu, targfreq, pol->min, pol->max, relation);
-
-	if (query_current_values_with_pending_wait(data))
-		goto err_out;
-
-	if (cpu_family != CPU_HW_PSTATE) {
-		pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
-		data->currfid, data->currvid);
-
-		if ((checkvid != data->currvid) ||
-		    (checkfid != data->currfid)) {
-			printk(KERN_INFO PFX
-				"error - out of sync, fix 0x%x 0x%x, "
-				"vid 0x%x 0x%x\n",
-				checkfid, data->currfid,
-				checkvid, data->currvid);
-		}
-	}
-
-	if (cpufreq_frequency_table_target(pol, data->powernow_table,
-				targfreq, relation, &newstate))
-		goto err_out;
-
-	mutex_lock(&fidvid_mutex);
-
-	powernow_k8_acpi_pst_values(data, newstate);
-
-	if (cpu_family == CPU_HW_PSTATE)
-		ret = transition_frequency_pstate(data, newstate);
-	else
-		ret = transition_frequency_fidvid(data, newstate);
-	if (ret) {
-		printk(KERN_ERR PFX "transition frequency failed\n");
-		ret = 1;
-		mutex_unlock(&fidvid_mutex);
-		goto err_out;
-	}
-	mutex_unlock(&fidvid_mutex);
-
-	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
-				newstate);
-	else
-		pol->cur = find_khz_freq_from_fid(data->currfid);
-	ret = 0;
-
-err_out:
-	set_cpus_allowed_ptr(current, oldmask);
-	free_cpumask_var(oldmask);
-	return ret;
-}
-
-/* Driver entry point to verify the policy and range of frequencies */
-static int powernowk8_verify(struct cpufreq_policy *pol)
-{
-	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
-
-	if (!data)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(pol, data->powernow_table);
-}
-
-struct init_on_cpu {
-	struct powernow_k8_data *data;
-	int rc;
-};
-
-static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu)
-{
-	struct init_on_cpu *init_on_cpu = _init_on_cpu;
-
-	if (pending_bit_stuck()) {
-		printk(KERN_ERR PFX "failing init, change pending bit set\n");
-		init_on_cpu->rc = -ENODEV;
-		return;
-	}
-
-	if (query_current_values_with_pending_wait(init_on_cpu->data)) {
-		init_on_cpu->rc = -ENODEV;
-		return;
-	}
-
-	if (cpu_family == CPU_OPTERON)
-		fidvid_msr_init();
-
-	init_on_cpu->rc = 0;
-}
-
-/* per CPU init entry point to the driver */
-static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
-{
-	static const char ACPI_PSS_BIOS_BUG_MSG[] =
-		KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
-		FW_BUG PFX "Try again with latest BIOS.\n";
-	struct powernow_k8_data *data;
-	struct init_on_cpu init_on_cpu;
-	int rc;
-	struct cpuinfo_x86 *c = &cpu_data(pol->cpu);
-
-	if (!cpu_online(pol->cpu))
-		return -ENODEV;
-
-	smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1);
-	if (rc)
-		return -ENODEV;
-
-	data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
-	if (!data) {
-		printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
-		return -ENOMEM;
-	}
-
-	data->cpu = pol->cpu;
-	data->currpstate = HW_PSTATE_INVALID;
-
-	if (powernow_k8_cpu_init_acpi(data)) {
-		/*
-		 * Use the PSB BIOS structure. This is only available on
-		 * an UP version, and is deprecated by AMD.
-		 */
-		if (num_online_cpus() != 1) {
-			printk_once(ACPI_PSS_BIOS_BUG_MSG);
-			goto err_out;
-		}
-		if (pol->cpu != 0) {
-			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
-			       "CPU other than CPU0. Complain to your BIOS "
-			       "vendor.\n");
-			goto err_out;
-		}
-		rc = find_psb_table(data);
-		if (rc)
-			goto err_out;
-
-		/* Take a crude guess here.
-		 * That guess was in microseconds, so multiply with 1000 */
-		pol->cpuinfo.transition_latency = (
-			 ((data->rvo + 8) * data->vstable * VST_UNITS_20US) +
-			 ((1 << data->irt) * 30)) * 1000;
-	} else /* ACPI _PSS objects available */
-		pol->cpuinfo.transition_latency = get_transition_latency(data);
-
-	/* only run on specific CPU from here on */
-	init_on_cpu.data = data;
-	smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu,
-				 &init_on_cpu, 1);
-	rc = init_on_cpu.rc;
-	if (rc != 0)
-		goto err_out_exit_acpi;
-
-	if (cpu_family == CPU_HW_PSTATE)
-		cpumask_copy(pol->cpus, cpumask_of(pol->cpu));
-	else
-		cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu));
-	data->available_cores = pol->cpus;
-
-	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
-				data->currpstate);
-	else
-		pol->cur = find_khz_freq_from_fid(data->currfid);
-	pr_debug("policy current frequency %d kHz\n", pol->cur);
-
-	/* min/max the cpu is capable of */
-	if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
-		printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n");
-		powernow_k8_cpu_exit_acpi(data);
-		kfree(data->powernow_table);
-		kfree(data);
-		return -EINVAL;
-	}
-
-	/* Check for APERF/MPERF support in hardware */
-	if (cpu_has(c, X86_FEATURE_APERFMPERF))
-		cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf;
-
-	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
-
-	if (cpu_family == CPU_HW_PSTATE)
-		pr_debug("cpu_init done, current pstate 0x%x\n",
-				data->currpstate);
-	else
-		pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
-			data->currfid, data->currvid);
-
-	per_cpu(powernow_data, pol->cpu) = data;
-
-	return 0;
-
-err_out_exit_acpi:
-	powernow_k8_cpu_exit_acpi(data);
-
-err_out:
-	kfree(data);
-	return -ENODEV;
-}
-
-static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
-{
-	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
-
-	if (!data)
-		return -EINVAL;
-
-	powernow_k8_cpu_exit_acpi(data);
-
-	cpufreq_frequency_table_put_attr(pol->cpu);
-
-	kfree(data->powernow_table);
-	kfree(data);
-	per_cpu(powernow_data, pol->cpu) = NULL;
-
-	return 0;
-}
-
-static void query_values_on_cpu(void *_err)
-{
-	int *err = _err;
-	struct powernow_k8_data *data = __this_cpu_read(powernow_data);
-
-	*err = query_current_values_with_pending_wait(data);
-}
-
-static unsigned int powernowk8_get(unsigned int cpu)
-{
-	struct powernow_k8_data *data = per_cpu(powernow_data, cpu);
-	unsigned int khz = 0;
-	int err;
-
-	if (!data)
-		return 0;
-
-	smp_call_function_single(cpu, query_values_on_cpu, &err, true);
-	if (err)
-		goto out;
-
-	if (cpu_family == CPU_HW_PSTATE)
-		khz = find_khz_freq_from_pstate(data->powernow_table,
-						data->currpstate);
-	else
-		khz = find_khz_freq_from_fid(data->currfid);
-
-
-out:
-	return khz;
-}
-
-static void _cpb_toggle_msrs(bool t)
-{
-	int cpu;
-
-	get_online_cpus();
-
-	rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
-
-	for_each_cpu(cpu, cpu_online_mask) {
-		struct msr *reg = per_cpu_ptr(msrs, cpu);
-		if (t)
-			reg->l &= ~BIT(25);
-		else
-			reg->l |= BIT(25);
-	}
-	wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
-
-	put_online_cpus();
-}
-
-/*
- * Switch on/off core performance boosting.
- *
- * 0=disable
- * 1=enable.
- */
-static void cpb_toggle(bool t)
-{
-	if (!cpb_capable)
-		return;
-
-	if (t && !cpb_enabled) {
-		cpb_enabled = true;
-		_cpb_toggle_msrs(t);
-		printk(KERN_INFO PFX "Core Boosting enabled.\n");
-	} else if (!t && cpb_enabled) {
-		cpb_enabled = false;
-		_cpb_toggle_msrs(t);
-		printk(KERN_INFO PFX "Core Boosting disabled.\n");
-	}
-}
-
-static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf,
-				 size_t count)
-{
-	int ret = -EINVAL;
-	unsigned long val = 0;
-
-	ret = strict_strtoul(buf, 10, &val);
-	if (!ret && (val == 0 || val == 1) && cpb_capable)
-		cpb_toggle(val);
-	else
-		return -EINVAL;
-
-	return count;
-}
-
-static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf)
-{
-	return sprintf(buf, "%u\n", cpb_enabled);
-}
-
-#define define_one_rw(_name) \
-static struct freq_attr _name = \
-__ATTR(_name, 0644, show_##_name, store_##_name)
-
-define_one_rw(cpb);
-
-static struct freq_attr *powernow_k8_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	&cpb,
-	NULL,
-};
-
-static struct cpufreq_driver cpufreq_amd64_driver = {
-	.verify		= powernowk8_verify,
-	.target		= powernowk8_target,
-	.bios_limit	= acpi_processor_get_bios_limit,
-	.init		= powernowk8_cpu_init,
-	.exit		= __devexit_p(powernowk8_cpu_exit),
-	.get		= powernowk8_get,
-	.name		= "powernow-k8",
-	.owner		= THIS_MODULE,
-	.attr		= powernow_k8_attr,
-};
-
-/*
- * Clear the boost-disable flag on the CPU_DOWN path so that this cpu
- * cannot block the remaining ones from boosting. On the CPU_UP path we
- * simply keep the boost-disable flag in sync with the current global
- * state.
- */
-static int cpb_notify(struct notifier_block *nb, unsigned long action,
-		      void *hcpu)
-{
-	unsigned cpu = (long)hcpu;
-	u32 lo, hi;
-
-	switch (action) {
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-
-		if (!cpb_enabled) {
-			rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
-			lo |= BIT(25);
-			wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi);
-		}
-		break;
-
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-		rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
-		lo &= ~BIT(25);
-		wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi);
-		break;
-
-	default:
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block cpb_nb = {
-	.notifier_call		= cpb_notify,
-};
-
-/* driver entry point for init */
-static int __cpuinit powernowk8_init(void)
-{
-	unsigned int i, supported_cpus = 0, cpu;
-	int rv;
-
-	for_each_online_cpu(i) {
-		int rc;
-		smp_call_function_single(i, check_supported_cpu, &rc, 1);
-		if (rc == 0)
-			supported_cpus++;
-	}
-
-	if (supported_cpus != num_online_cpus())
-		return -ENODEV;
-
-	printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
-		num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
-
-	if (boot_cpu_has(X86_FEATURE_CPB)) {
-
-		cpb_capable = true;
-
-		msrs = msrs_alloc();
-		if (!msrs) {
-			printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
-			return -ENOMEM;
-		}
-
-		register_cpu_notifier(&cpb_nb);
-
-		rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
-
-		for_each_cpu(cpu, cpu_online_mask) {
-			struct msr *reg = per_cpu_ptr(msrs, cpu);
-			cpb_enabled |= !(!!(reg->l & BIT(25)));
-		}
-
-		printk(KERN_INFO PFX "Core Performance Boosting: %s.\n",
-			(cpb_enabled ? "on" : "off"));
-	}
-
-	rv = cpufreq_register_driver(&cpufreq_amd64_driver);
-	if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) {
-		unregister_cpu_notifier(&cpb_nb);
-		msrs_free(msrs);
-		msrs = NULL;
-	}
-	return rv;
-}
-
-/* driver entry point for term */
-static void __exit powernowk8_exit(void)
-{
-	pr_debug("exit\n");
-
-	if (boot_cpu_has(X86_FEATURE_CPB)) {
-		msrs_free(msrs);
-		msrs = NULL;
-
-		unregister_cpu_notifier(&cpb_nb);
-	}
-
-	cpufreq_unregister_driver(&cpufreq_amd64_driver);
-}
-
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and "
-		"Mark Langsdorf <mark.langsdorf@amd.com>");
-MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
-MODULE_LICENSE("GPL");
-
-late_initcall(powernowk8_init);
-module_exit(powernowk8_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
deleted file mode 100644
index 3744d26..0000000
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- *  (c) 2003-2006 Advanced Micro Devices, Inc.
- *  Your use of this code is subject to the terms and conditions of the
- *  GNU general public license version 2. See "COPYING" or
- *  http://www.gnu.org/licenses/gpl.html
- */
-
-enum pstate {
-	HW_PSTATE_INVALID = 0xff,
-	HW_PSTATE_0 = 0,
-	HW_PSTATE_1 = 1,
-	HW_PSTATE_2 = 2,
-	HW_PSTATE_3 = 3,
-	HW_PSTATE_4 = 4,
-	HW_PSTATE_5 = 5,
-	HW_PSTATE_6 = 6,
-	HW_PSTATE_7 = 7,
-};
-
-struct powernow_k8_data {
-	unsigned int cpu;
-
-	u32 numps;  /* number of p-states */
-	u32 batps;  /* number of p-states supported on battery */
-	u32 max_hw_pstate; /* maximum legal hardware pstate */
-
-	/* these values are constant when the PSB is used to determine
-	 * vid/fid pairings, but are modified during the ->target() call
-	 * when ACPI is used */
-	u32 rvo;     /* ramp voltage offset */
-	u32 irt;     /* isochronous relief time */
-	u32 vidmvs;  /* usable value calculated from mvs */
-	u32 vstable; /* voltage stabilization time, units 20 us */
-	u32 plllock; /* pll lock time, units 1 us */
-        u32 exttype; /* extended interface = 1 */
-
-	/* keep track of the current fid / vid or pstate */
-	u32 currvid;
-	u32 currfid;
-	enum pstate currpstate;
-
-	/* the powernow_table includes all frequency and vid/fid pairings:
-	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
-	 * frequency is in kHz */
-	struct cpufreq_frequency_table  *powernow_table;
-
-	/* the acpi table needs to be kept. it's only available if ACPI was
-	 * used to determine valid frequency/vid/fid states */
-	struct acpi_processor_performance acpi_data;
-
-	/* we need to keep track of associated cores, but let cpufreq
-	 * handle hotplug events - so just point at cpufreq pol->cpus
-	 * structure */
-	struct cpumask *available_cores;
-};
-
-/* processor's cpuid instruction support */
-#define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
-#define CPUID_XFAM			0x0ff00000	/* extended family */
-#define CPUID_XFAM_K8			0
-#define CPUID_XMOD			0x000f0000	/* extended model */
-#define CPUID_XMOD_REV_MASK		0x000c0000
-#define CPUID_XFAM_10H			0x00100000	/* family 0x10 */
-#define CPUID_USE_XFAM_XMOD		0x00000f00
-#define CPUID_GET_MAX_CAPABILITIES	0x80000000
-#define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
-#define P_STATE_TRANSITION_CAPABLE	6
-
-/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For     */
-/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and   */
-/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
-/* the register number is placed in ecx, and the data is returned in edx:eax. */
-
-#define MSR_FIDVID_CTL      0xc0010041
-#define MSR_FIDVID_STATUS   0xc0010042
-
-/* Field definitions within the FID VID Low Control MSR : */
-#define MSR_C_LO_INIT_FID_VID     0x00010000
-#define MSR_C_LO_NEW_VID          0x00003f00
-#define MSR_C_LO_NEW_FID          0x0000003f
-#define MSR_C_LO_VID_SHIFT        8
-
-/* Field definitions within the FID VID High Control MSR : */
-#define MSR_C_HI_STP_GNT_TO	  0x000fffff
-
-/* Field definitions within the FID VID Low Status MSR : */
-#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
-#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
-#define MSR_S_LO_MAX_FID          0x003f0000
-#define MSR_S_LO_START_FID        0x00003f00
-#define MSR_S_LO_CURRENT_FID      0x0000003f
-
-/* Field definitions within the FID VID High Status MSR : */
-#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
-#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
-#define MSR_S_HI_START_VID        0x00003f00
-#define MSR_S_HI_CURRENT_VID      0x0000003f
-#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
-
-
-/* Hardware Pstate _PSS and MSR definitions */
-#define USE_HW_PSTATE		0x00000080
-#define HW_PSTATE_MASK 		0x00000007
-#define HW_PSTATE_VALID_MASK 	0x80000000
-#define HW_PSTATE_MAX_MASK	0x000000f0
-#define HW_PSTATE_MAX_SHIFT	4
-#define MSR_PSTATE_DEF_BASE 	0xc0010064 /* base of Pstate MSRs */
-#define MSR_PSTATE_STATUS 	0xc0010063 /* Pstate Status MSR */
-#define MSR_PSTATE_CTRL 	0xc0010062 /* Pstate control MSR */
-#define MSR_PSTATE_CUR_LIMIT	0xc0010061 /* pstate current limit MSR */
-
-/* define the two driver architectures */
-#define CPU_OPTERON 0
-#define CPU_HW_PSTATE 1
-
-
-/*
- * There are restrictions frequencies have to follow:
- * - only 1 entry in the low fid table ( <=1.4GHz )
- * - lowest entry in the high fid table must be >= 2 * the entry in the
- *   low fid table
- * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
- *   in the low fid table
- * - the parts can only step at <= 200 MHz intervals, odd fid values are
- *   supported in revision G and later revisions.
- * - lowest frequency must be >= interprocessor hypertransport link speed
- *   (only applies to MP systems obviously)
- */
-
-/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
-#define LO_FID_TABLE_TOP     7	/* fid values marking the boundary    */
-#define HI_FID_TABLE_BOTTOM  8	/* between the low and high tables    */
-
-#define LO_VCOFREQ_TABLE_TOP    1400	/* corresponding vco frequency values */
-#define HI_VCOFREQ_TABLE_BOTTOM 1600
-
-#define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
-
-#define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
-#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
-
-#define MIN_FREQ 800	/* Min and max freqs, per spec */
-#define MAX_FREQ 5000
-
-#define INVALID_FID_MASK 0xffffffc0  /* not a valid fid if these bits are set */
-#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
-
-#define VID_OFF 0x3f
-
-#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
-
-#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
-
-#define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
-#define VST_UNITS_20US 20   /* Voltage Stabilization Time is in units of 20us */
-
-/*
- * Most values of interest are encoded in a single field of the _PSS
- * entries: the "control" value.
- */
-
-#define IRT_SHIFT      30
-#define RVO_SHIFT      28
-#define EXT_TYPE_SHIFT 27
-#define PLL_L_SHIFT    20
-#define MVS_SHIFT      18
-#define VST_SHIFT      11
-#define VID_SHIFT       6
-#define IRT_MASK        3
-#define RVO_MASK        3
-#define EXT_TYPE_MASK   1
-#define PLL_L_MASK   0x7f
-#define MVS_MASK        3
-#define VST_MASK     0x7f
-#define VID_MASK     0x1f
-#define FID_MASK     0x1f
-#define EXT_VID_MASK 0x3f
-#define EXT_FID_MASK 0x3f
-
-
-/*
- * Version 1.4 of the PSB table. This table is constructed by BIOS and is
- * to tell the OS's power management driver which VIDs and FIDs are
- * supported by this particular processor.
- * If the data in the PSB / PST is wrong, then this driver will program the
- * wrong values into hardware, which is very likely to lead to a crash.
- */
-
-#define PSB_ID_STRING      "AMDK7PNOW!"
-#define PSB_ID_STRING_LEN  10
-
-#define PSB_VERSION_1_4  0x14
-
-struct psb_s {
-	u8 signature[10];
-	u8 tableversion;
-	u8 flags1;
-	u16 vstable;
-	u8 flags2;
-	u8 num_tables;
-	u32 cpuid;
-	u8 plllocktime;
-	u8 maxfid;
-	u8 maxvid;
-	u8 numps;
-};
-
-/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
-struct pst_s {
-	u8 fid;
-	u8 vid;
-};
-
-static int core_voltage_pre_transition(struct powernow_k8_data *data,
-	u32 reqvid, u32 regfid);
-static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
-static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
-
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
-
-static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
-static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
deleted file mode 100644
index 1e205e6..0000000
--- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- *	sc520_freq.c: cpufreq driver for the AMD Elan sc520
- *
- *	Copyright (C) 2005 Sean Young <sean@mess.org>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- *	Based on elanfreq.c
- *
- *	2005-03-30: - initial revision
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/delay.h>
-#include <linux/cpufreq.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#include <asm/msr.h>
-
-#define MMCR_BASE	0xfffef000	/* The default base address */
-#define OFFS_CPUCTL	0x2   /* CPU Control Register */
-
-static __u8 __iomem *cpuctl;
-
-#define PFX "sc520_freq: "
-
-static struct cpufreq_frequency_table sc520_freq_table[] = {
-	{0x01,	100000},
-	{0x02,	133000},
-	{0,	CPUFREQ_TABLE_END},
-};
-
-static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
-{
-	u8 clockspeed_reg = *cpuctl;
-
-	switch (clockspeed_reg & 0x03) {
-	default:
-		printk(KERN_ERR PFX "error: cpuctl register has unexpected "
-				"value %02x\n", clockspeed_reg);
-	case 0x01:
-		return 100000;
-	case 0x02:
-		return 133000;
-	}
-}
-
-static void sc520_freq_set_cpu_state(unsigned int state)
-{
-
-	struct cpufreq_freqs	freqs;
-	u8 clockspeed_reg;
-
-	freqs.old = sc520_freq_get_cpu_frequency(0);
-	freqs.new = sc520_freq_table[state].frequency;
-	freqs.cpu = 0; /* AMD Elan is UP */
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	pr_debug("attempting to set frequency to %i kHz\n",
-			sc520_freq_table[state].frequency);
-
-	local_irq_disable();
-
-	clockspeed_reg = *cpuctl & ~0x03;
-	*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
-
-	local_irq_enable();
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-};
-
-static int sc520_freq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
-}
-
-static int sc520_freq_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int newstate = 0;
-
-	if (cpufreq_frequency_table_target(policy, sc520_freq_table,
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	sc520_freq_set_cpu_state(newstate);
-
-	return 0;
-}
-
-
-/*
- *	Module init and exit code
- */
-
-static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	int result;
-
-	/* capability check */
-	if (c->x86_vendor != X86_VENDOR_AMD ||
-	    c->x86 != 4 || c->x86_model != 9)
-		return -ENODEV;
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
-	policy->cur = sc520_freq_get_cpu_frequency(0);
-
-	result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
-	if (result)
-		return result;
-
-	cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
-
-	return 0;
-}
-
-
-static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-
-static struct freq_attr *sc520_freq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-
-static struct cpufreq_driver sc520_freq_driver = {
-	.get	= sc520_freq_get_cpu_frequency,
-	.verify	= sc520_freq_verify,
-	.target	= sc520_freq_target,
-	.init	= sc520_freq_cpu_init,
-	.exit	= sc520_freq_cpu_exit,
-	.name	= "sc520_freq",
-	.owner	= THIS_MODULE,
-	.attr	= sc520_freq_attr,
-};
-
-
-static int __init sc520_freq_init(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	int err;
-
-	/* Test if we have the right hardware */
-	if (c->x86_vendor != X86_VENDOR_AMD ||
-	    c->x86 != 4 || c->x86_model != 9) {
-		pr_debug("no Elan SC520 processor found!\n");
-		return -ENODEV;
-	}
-	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
-	if (!cpuctl) {
-		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
-		return -ENOMEM;
-	}
-
-	err = cpufreq_register_driver(&sc520_freq_driver);
-	if (err)
-		iounmap(cpuctl);
-
-	return err;
-}
-
-
-static void __exit sc520_freq_exit(void)
-{
-	cpufreq_unregister_driver(&sc520_freq_driver);
-	iounmap(cpuctl);
-}
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sean Young <sean@mess.org>");
-MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
-
-module_init(sc520_freq_init);
-module_exit(sc520_freq_exit);
-
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
deleted file mode 100644
index 6ea3455..0000000
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
- * M (part of the Centrino chipset).
- *
- * Since the original Pentium M, most new Intel CPUs support Enhanced
- * SpeedStep.
- *
- * Despite the "SpeedStep" in the name, this is almost entirely unlike
- * traditional SpeedStep.
- *
- * Modelled on speedstep.c
- *
- * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>	/* current */
-#include <linux/delay.h>
-#include <linux/compiler.h>
-#include <linux/gfp.h>
-
-#include <asm/msr.h>
-#include <asm/processor.h>
-#include <asm/cpufeature.h>
-
-#define PFX		"speedstep-centrino: "
-#define MAINTAINER	"cpufreq@vger.kernel.org"
-
-#define INTEL_MSR_RANGE	(0xffff)
-
-struct cpu_id
-{
-	__u8	x86;            /* CPU family */
-	__u8	x86_model;	/* model */
-	__u8	x86_mask;	/* stepping */
-};
-
-enum {
-	CPU_BANIAS,
-	CPU_DOTHAN_A1,
-	CPU_DOTHAN_A2,
-	CPU_DOTHAN_B0,
-	CPU_MP4HT_D0,
-	CPU_MP4HT_E0,
-};
-
-static const struct cpu_id cpu_ids[] = {
-	[CPU_BANIAS]	= { 6,  9, 5 },
-	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
-	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
-	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
-	[CPU_MP4HT_D0]	= {15,  3, 4 },
-	[CPU_MP4HT_E0]	= {15,  4, 1 },
-};
-#define N_IDS	ARRAY_SIZE(cpu_ids)
-
-struct cpu_model
-{
-	const struct cpu_id *cpu_id;
-	const char	*model_name;
-	unsigned	max_freq; /* max clock in kHz */
-
-	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
-};
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
-				  const struct cpu_id *x);
-
-/* Operating points for current CPU */
-static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
-static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
-
-static struct cpufreq_driver centrino_driver;
-
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
-
-/* Computes the correct form for IA32_PERF_CTL MSR for a particular
-   frequency/voltage operating point; frequency in MHz, volts in mV.
-   This is stored as "index" in the structure. */
-#define OP(mhz, mv)							\
-	{								\
-		.frequency = (mhz) * 1000,				\
-		.index = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
-	}
-
-/*
- * These voltage tables were derived from the Intel Pentium M
- * datasheet, document 25261202.pdf, Table 5.  I have verified they
- * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
- * M.
- */
-
-/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
-static struct cpufreq_frequency_table banias_900[] =
-{
-	OP(600,  844),
-	OP(800,  988),
-	OP(900, 1004),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
-static struct cpufreq_frequency_table banias_1000[] =
-{
-	OP(600,   844),
-	OP(800,   972),
-	OP(900,   988),
-	OP(1000, 1004),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
-static struct cpufreq_frequency_table banias_1100[] =
-{
-	OP( 600,  956),
-	OP( 800, 1020),
-	OP( 900, 1100),
-	OP(1000, 1164),
-	OP(1100, 1180),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-
-/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
-static struct cpufreq_frequency_table banias_1200[] =
-{
-	OP( 600,  956),
-	OP( 800, 1004),
-	OP( 900, 1020),
-	OP(1000, 1100),
-	OP(1100, 1164),
-	OP(1200, 1180),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.30GHz (Banias) */
-static struct cpufreq_frequency_table banias_1300[] =
-{
-	OP( 600,  956),
-	OP( 800, 1260),
-	OP(1000, 1292),
-	OP(1200, 1356),
-	OP(1300, 1388),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.40GHz (Banias) */
-static struct cpufreq_frequency_table banias_1400[] =
-{
-	OP( 600,  956),
-	OP( 800, 1180),
-	OP(1000, 1308),
-	OP(1200, 1436),
-	OP(1400, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.50GHz (Banias) */
-static struct cpufreq_frequency_table banias_1500[] =
-{
-	OP( 600,  956),
-	OP( 800, 1116),
-	OP(1000, 1228),
-	OP(1200, 1356),
-	OP(1400, 1452),
-	OP(1500, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.60GHz (Banias) */
-static struct cpufreq_frequency_table banias_1600[] =
-{
-	OP( 600,  956),
-	OP( 800, 1036),
-	OP(1000, 1164),
-	OP(1200, 1276),
-	OP(1400, 1420),
-	OP(1600, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.70GHz (Banias) */
-static struct cpufreq_frequency_table banias_1700[] =
-{
-	OP( 600,  956),
-	OP( 800, 1004),
-	OP(1000, 1116),
-	OP(1200, 1228),
-	OP(1400, 1308),
-	OP(1700, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-#undef OP
-
-#define _BANIAS(cpuid, max, name)	\
-{	.cpu_id		= cpuid,	\
-	.model_name	= "Intel(R) Pentium(R) M processor " name "MHz", \
-	.max_freq	= (max)*1000,	\
-	.op_points	= banias_##max,	\
-}
-#define BANIAS(max)	_BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
-
-/* CPU models, their operating frequency range, and freq/voltage
-   operating points */
-static struct cpu_model models[] =
-{
-	_BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
-	BANIAS(1000),
-	BANIAS(1100),
-	BANIAS(1200),
-	BANIAS(1300),
-	BANIAS(1400),
-	BANIAS(1500),
-	BANIAS(1600),
-	BANIAS(1700),
-
-	/* NULL model_name is a wildcard */
-	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
-	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
-	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
-	{ &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
-	{ &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
-
-	{ NULL, }
-};
-#undef _BANIAS
-#undef BANIAS
-
-static int centrino_cpu_init_table(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
-	struct cpu_model *model;
-
-	for(model = models; model->cpu_id != NULL; model++)
-		if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
-		    (model->model_name == NULL ||
-		     strcmp(cpu->x86_model_id, model->model_name) == 0))
-			break;
-
-	if (model->cpu_id == NULL) {
-		/* No match at all */
-		pr_debug("no support for CPU model \"%s\": "
-		       "send /proc/cpuinfo to " MAINTAINER "\n",
-		       cpu->x86_model_id);
-		return -ENOENT;
-	}
-
-	if (model->op_points == NULL) {
-		/* Matched a non-match */
-		pr_debug("no table support for CPU model \"%s\"\n",
-		       cpu->x86_model_id);
-		pr_debug("try using the acpi-cpufreq driver\n");
-		return -ENOENT;
-	}
-
-	per_cpu(centrino_model, policy->cpu) = model;
-
-	pr_debug("found \"%s\": max frequency: %dkHz\n",
-	       model->model_name, model->max_freq);
-
-	return 0;
-}
-
-#else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
-
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
-				  const struct cpu_id *x)
-{
-	if ((c->x86 == x->x86) &&
-	    (c->x86_model == x->x86_model) &&
-	    (c->x86_mask == x->x86_mask))
-		return 1;
-	return 0;
-}
-
-/* To be called only after centrino_model is initialized */
-static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
-{
-	int i;
-
-	/*
-	 * Extract clock in kHz from PERF_CTL value
-	 * for centrino, as some DSDTs are buggy.
-	 * Ideally, this can be done using the acpi_data structure.
-	 */
-	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
-	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
-	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
-		msr = (msr >> 8) & 0xff;
-		return msr * 100000;
-	}
-
-	if ((!per_cpu(centrino_model, cpu)) ||
-	    (!per_cpu(centrino_model, cpu)->op_points))
-		return 0;
-
-	msr &= 0xffff;
-	for (i = 0;
-		per_cpu(centrino_model, cpu)->op_points[i].frequency
-							!= CPUFREQ_TABLE_END;
-	     i++) {
-		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
-			return per_cpu(centrino_model, cpu)->
-							op_points[i].frequency;
-	}
-	if (failsafe)
-		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
-	else
-		return 0;
-}
-
-/* Return the current CPU frequency in kHz */
-static unsigned int get_cur_freq(unsigned int cpu)
-{
-	unsigned l, h;
-	unsigned clock_freq;
-
-	rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
-	clock_freq = extract_clock(l, cpu, 0);
-
-	if (unlikely(clock_freq == 0)) {
-		/*
-		 * On some CPUs, we can see transient MSR values (which are
-		 * not present in _PSS), while CPU is doing some automatic
-		 * P-state transition (like TM2). Get the last freq set 
-		 * in PERF_CTL.
-		 */
-		rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
-		clock_freq = extract_clock(l, cpu, 1);
-	}
-	return clock_freq;
-}
-
-
-static int centrino_cpu_init(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
-	unsigned freq;
-	unsigned l, h;
-	int ret;
-	int i;
-
-	/* Only Intel makes Enhanced Speedstep-capable CPUs */
-	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
-	    !cpu_has(cpu, X86_FEATURE_EST))
-		return -ENODEV;
-
-	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
-		centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
-
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	for (i = 0; i < N_IDS; i++)
-		if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
-			break;
-
-	if (i != N_IDS)
-		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
-
-	if (!per_cpu(centrino_cpu, policy->cpu)) {
-		pr_debug("found unsupported CPU with "
-		"Enhanced SpeedStep: send /proc/cpuinfo to "
-		MAINTAINER "\n");
-		return -ENODEV;
-	}
-
-	if (centrino_cpu_init_table(policy)) {
-		return -ENODEV;
-	}
-
-	/* Check to see if Enhanced SpeedStep is enabled, and try to
-	   enable it if not. */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-
-	if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-		l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
-		pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
-		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
-
-		/* check to see if it stuck */
-		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-		if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-			printk(KERN_INFO PFX
-				"couldn't enable Enhanced SpeedStep\n");
-			return -ENODEV;
-		}
-	}
-
-	freq = get_cur_freq(policy->cpu);
-	policy->cpuinfo.transition_latency = 10000;
-						/* 10uS transition latency */
-	policy->cur = freq;
-
-	pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
-
-	ret = cpufreq_frequency_table_cpuinfo(policy,
-		per_cpu(centrino_model, policy->cpu)->op_points);
-	if (ret)
-		return (ret);
-
-	cpufreq_frequency_table_get_attr(
-		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
-
-	return 0;
-}
-
-static int centrino_cpu_exit(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-
-	if (!per_cpu(centrino_model, cpu))
-		return -ENODEV;
-
-	cpufreq_frequency_table_put_attr(cpu);
-
-	per_cpu(centrino_model, cpu) = NULL;
-
-	return 0;
-}
-
-/**
- * centrino_verify - verifies a new CPUFreq policy
- * @policy: new policy
- *
- * Limit must be within this model's frequency range at least one
- * border included.
- */
-static int centrino_verify (struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy,
-			per_cpu(centrino_model, policy->cpu)->op_points);
-}
-
-/**
- * centrino_setpolicy - set a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * Sets a new CPUFreq policy.
- */
-static int centrino_target (struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int    newstate = 0;
-	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
-	struct cpufreq_freqs	freqs;
-	int			retval = 0;
-	unsigned int		j, k, first_cpu, tmp;
-	cpumask_var_t covered_cpus;
-
-	if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
-		return -ENOMEM;
-
-	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	if (unlikely(cpufreq_frequency_table_target(policy,
-			per_cpu(centrino_model, cpu)->op_points,
-			target_freq,
-			relation,
-			&newstate))) {
-		retval = -EINVAL;
-		goto out;
-	}
-
-	first_cpu = 1;
-	for_each_cpu(j, policy->cpus) {
-		int good_cpu;
-
-		/* cpufreq holds the hotplug lock, so we are safe here */
-		if (!cpu_online(j))
-			continue;
-
-		/*
-		 * Support for SMP systems.
-		 * Make sure we are running on CPU that wants to change freq
-		 */
-		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			good_cpu = cpumask_any_and(policy->cpus,
-						   cpu_online_mask);
-		else
-			good_cpu = j;
-
-		if (good_cpu >= nr_cpu_ids) {
-			pr_debug("couldn't limit to CPUs in this domain\n");
-			retval = -EAGAIN;
-			if (first_cpu) {
-				/* We haven't started the transition yet. */
-				goto out;
-			}
-			break;
-		}
-
-		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
-
-		if (first_cpu) {
-			rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
-			if (msr == (oldmsr & 0xffff)) {
-				pr_debug("no change needed - msr was and needs "
-					"to be %x\n", oldmsr);
-				retval = 0;
-				goto out;
-			}
-
-			freqs.old = extract_clock(oldmsr, cpu, 0);
-			freqs.new = extract_clock(msr, cpu, 0);
-
-			pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
-				target_freq, freqs.old, freqs.new, msr);
-
-			for_each_cpu(k, policy->cpus) {
-				if (!cpu_online(k))
-					continue;
-				freqs.cpu = k;
-				cpufreq_notify_transition(&freqs,
-					CPUFREQ_PRECHANGE);
-			}
-
-			first_cpu = 0;
-			/* all but 16 LSB are reserved, treat them with care */
-			oldmsr &= ~0xffff;
-			msr &= 0xffff;
-			oldmsr |= msr;
-		}
-
-		wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
-		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			break;
-
-		cpumask_set_cpu(j, covered_cpus);
-	}
-
-	for_each_cpu(k, policy->cpus) {
-		if (!cpu_online(k))
-			continue;
-		freqs.cpu = k;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-
-	if (unlikely(retval)) {
-		/*
-		 * We have failed halfway through the frequency change.
-		 * We have sent callbacks to policy->cpus and
-		 * MSRs have already been written on coverd_cpus.
-		 * Best effort undo..
-		 */
-
-		for_each_cpu(j, covered_cpus)
-			wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
-
-		tmp = freqs.new;
-		freqs.new = freqs.old;
-		freqs.old = tmp;
-		for_each_cpu(j, policy->cpus) {
-			if (!cpu_online(j))
-				continue;
-			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-		}
-	}
-	retval = 0;
-
-out:
-	free_cpumask_var(covered_cpus);
-	return retval;
-}
-
-static struct freq_attr* centrino_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver centrino_driver = {
-	.name		= "centrino", /* should be speedstep-centrino,
-					 but there's a 16 char limit */
-	.init		= centrino_cpu_init,
-	.exit		= centrino_cpu_exit,
-	.verify		= centrino_verify,
-	.target		= centrino_target,
-	.get		= get_cur_freq,
-	.attr           = centrino_attr,
-	.owner		= THIS_MODULE,
-};
-
-
-/**
- * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
- *
- * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
- * unsupported devices, -ENOENT if there's no voltage table for this
- * particular CPU model, -EINVAL on problems during initiatization,
- * and zero on success.
- *
- * This is quite picky.  Not only does the CPU have to advertise the
- * "est" flag in the cpuid capability flags, we look for a specific
- * CPU model and stepping, and we need to have the exact model name in
- * our voltage tables.  That is, be paranoid about not releasing
- * someone's valuable magic smoke.
- */
-static int __init centrino_init(void)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(0);
-
-	if (!cpu_has(cpu, X86_FEATURE_EST))
-		return -ENODEV;
-
-	return cpufreq_register_driver(&centrino_driver);
-}
-
-static void __exit centrino_exit(void)
-{
-	cpufreq_unregister_driver(&centrino_driver);
-}
-
-MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
-MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
-MODULE_LICENSE ("GPL");
-
-late_initcall(centrino_init);
-module_exit(centrino_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
deleted file mode 100644
index a748ce7..0000000
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * (C) 2001  Dave Jones, Arjan van de ven.
- * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *  Based upon reverse engineered information, and on Intel documentation
- *  for chipsets ICH2-M and ICH3-M.
- *
- *  Many thanks to Ducrot Bruno for finding and fixing the last
- *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
- *  for extensive testing.
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-
-/*********************************************************************
- *                        SPEEDSTEP - DEFINITIONS                    *
- *********************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-
-#include "speedstep-lib.h"
-
-
-/* speedstep_chipset:
- *   It is necessary to know which chipset is used. As accesses to
- * this device occur at various places in this module, we need a
- * static struct pci_dev * pointing to that device.
- */
-static struct pci_dev *speedstep_chipset_dev;
-
-
-/* speedstep_processor
- */
-static enum speedstep_processor speedstep_processor;
-
-static u32 pmbase;
-
-/*
- *   There are only two frequency states for each processor. Values
- * are in kHz for the time being.
- */
-static struct cpufreq_frequency_table speedstep_freqs[] = {
-	{SPEEDSTEP_HIGH,	0},
-	{SPEEDSTEP_LOW,		0},
-	{0,			CPUFREQ_TABLE_END},
-};
-
-
-/**
- * speedstep_find_register - read the PMBASE address
- *
- * Returns: -ENODEV if no register could be found
- */
-static int speedstep_find_register(void)
-{
-	if (!speedstep_chipset_dev)
-		return -ENODEV;
-
-	/* get PMBASE */
-	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
-	if (!(pmbase & 0x01)) {
-		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
-		return -ENODEV;
-	}
-
-	pmbase &= 0xFFFFFFFE;
-	if (!pmbase) {
-		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
-		return -ENODEV;
-	}
-
-	pr_debug("pmbase is 0x%x\n", pmbase);
-	return 0;
-}
-
-/**
- * speedstep_set_state - set the SpeedStep state
- * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
- *
- *   Tries to change the SpeedStep state.  Can be called from
- *   smp_call_function_single.
- */
-static void speedstep_set_state(unsigned int state)
-{
-	u8 pm2_blk;
-	u8 value;
-	unsigned long flags;
-
-	if (state > 0x1)
-		return;
-
-	/* Disable IRQs */
-	local_irq_save(flags);
-
-	/* read state */
-	value = inb(pmbase + 0x50);
-
-	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
-
-	/* write new state */
-	value &= 0xFE;
-	value |= state;
-
-	pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
-
-	/* Disable bus master arbitration */
-	pm2_blk = inb(pmbase + 0x20);
-	pm2_blk |= 0x01;
-	outb(pm2_blk, (pmbase + 0x20));
-
-	/* Actual transition */
-	outb(value, (pmbase + 0x50));
-
-	/* Restore bus master arbitration */
-	pm2_blk &= 0xfe;
-	outb(pm2_blk, (pmbase + 0x20));
-
-	/* check if transition was successful */
-	value = inb(pmbase + 0x50);
-
-	/* Enable IRQs */
-	local_irq_restore(flags);
-
-	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
-
-	if (state == (value & 0x1))
-		pr_debug("change to %u MHz succeeded\n",
-			speedstep_get_frequency(speedstep_processor) / 1000);
-	else
-		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
-
-	return;
-}
-
-/* Wrapper for smp_call_function_single. */
-static void _speedstep_set_state(void *_state)
-{
-	speedstep_set_state(*(unsigned int *)_state);
-}
-
-/**
- * speedstep_activate - activate SpeedStep control in the chipset
- *
- *   Tries to activate the SpeedStep status and control registers.
- * Returns -EINVAL on an unsupported chipset, and zero on success.
- */
-static int speedstep_activate(void)
-{
-	u16 value = 0;
-
-	if (!speedstep_chipset_dev)
-		return -EINVAL;
-
-	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
-	if (!(value & 0x08)) {
-		value |= 0x08;
-		pr_debug("activating SpeedStep (TM) registers\n");
-		pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
-	}
-
-	return 0;
-}
-
-
-/**
- * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
- *
- *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
- * the LPC bridge / PM module which contains all power-management
- * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
- * chipset, or zero on failure.
- */
-static unsigned int speedstep_detect_chipset(void)
-{
-	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			      PCI_DEVICE_ID_INTEL_82801DB_12,
-			      PCI_ANY_ID, PCI_ANY_ID,
-			      NULL);
-	if (speedstep_chipset_dev)
-		return 4; /* 4-M */
-
-	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			      PCI_DEVICE_ID_INTEL_82801CA_12,
-			      PCI_ANY_ID, PCI_ANY_ID,
-			      NULL);
-	if (speedstep_chipset_dev)
-		return 3; /* 3-M */
-
-
-	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			      PCI_DEVICE_ID_INTEL_82801BA_10,
-			      PCI_ANY_ID, PCI_ANY_ID,
-			      NULL);
-	if (speedstep_chipset_dev) {
-		/* speedstep.c causes lockups on Dell Inspirons 8000 and
-		 * 8100 which use a pretty old revision of the 82815
-		 * host brige. Abort on these systems.
-		 */
-		static struct pci_dev *hostbridge;
-
-		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			      PCI_DEVICE_ID_INTEL_82815_MC,
-			      PCI_ANY_ID, PCI_ANY_ID,
-			      NULL);
-
-		if (!hostbridge)
-			return 2; /* 2-M */
-
-		if (hostbridge->revision < 5) {
-			pr_debug("hostbridge does not support speedstep\n");
-			speedstep_chipset_dev = NULL;
-			pci_dev_put(hostbridge);
-			return 0;
-		}
-
-		pci_dev_put(hostbridge);
-		return 2; /* 2-M */
-	}
-
-	return 0;
-}
-
-static void get_freq_data(void *_speed)
-{
-	unsigned int *speed = _speed;
-
-	*speed = speedstep_get_frequency(speedstep_processor);
-}
-
-static unsigned int speedstep_get(unsigned int cpu)
-{
-	unsigned int speed;
-
-	/* You're supposed to ensure CPU is online. */
-	if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
-		BUG();
-
-	pr_debug("detected %u kHz as current frequency\n", speed);
-	return speed;
-}
-
-/**
- * speedstep_target - set a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * Sets a new CPUFreq policy.
- */
-static int speedstep_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
-{
-	unsigned int newstate = 0, policy_cpu;
-	struct cpufreq_freqs freqs;
-	int i;
-
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
-	freqs.old = speedstep_get(policy_cpu);
-	freqs.new = speedstep_freqs[newstate].frequency;
-	freqs.cpu = policy->cpu;
-
-	pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
-
-	/* no transition necessary */
-	if (freqs.old == freqs.new)
-		return 0;
-
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
-
-	smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate,
-				 true);
-
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-
-	return 0;
-}
-
-
-/**
- * speedstep_verify - verifies a new CPUFreq policy
- * @policy: new policy
- *
- * Limit must be within speedstep_low_freq and speedstep_high_freq, with
- * at least one border included.
- */
-static int speedstep_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
-}
-
-struct get_freqs {
-	struct cpufreq_policy *policy;
-	int ret;
-};
-
-static void get_freqs_on_cpu(void *_get_freqs)
-{
-	struct get_freqs *get_freqs = _get_freqs;
-
-	get_freqs->ret =
-		speedstep_get_freqs(speedstep_processor,
-			    &speedstep_freqs[SPEEDSTEP_LOW].frequency,
-			    &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
-			    &get_freqs->policy->cpuinfo.transition_latency,
-			    &speedstep_set_state);
-}
-
-static int speedstep_cpu_init(struct cpufreq_policy *policy)
-{
-	int result;
-	unsigned int policy_cpu, speed;
-	struct get_freqs gf;
-
-	/* only run on CPU to be set, or on its sibling */
-#ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
-#endif
-	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
-
-	/* detect low and high frequency and transition latency */
-	gf.policy = policy;
-	smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1);
-	if (gf.ret)
-		return gf.ret;
-
-	/* get current speed setting */
-	speed = speedstep_get(policy_cpu);
-	if (!speed)
-		return -EIO;
-
-	pr_debug("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
-		? "low" : "high",
-		(speed / 1000));
-
-	/* cpuinfo and default policy values */
-	policy->cur = speed;
-
-	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
-	if (result)
-		return result;
-
-	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
-
-	return 0;
-}
-
-
-static int speedstep_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *speedstep_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-
-static struct cpufreq_driver speedstep_driver = {
-	.name	= "speedstep-ich",
-	.verify	= speedstep_verify,
-	.target	= speedstep_target,
-	.init	= speedstep_cpu_init,
-	.exit	= speedstep_cpu_exit,
-	.get	= speedstep_get,
-	.owner	= THIS_MODULE,
-	.attr	= speedstep_attr,
-};
-
-
-/**
- * speedstep_init - initializes the SpeedStep CPUFreq driver
- *
- *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
- * devices, -EINVAL on problems during initiatization, and zero on
- * success.
- */
-static int __init speedstep_init(void)
-{
-	/* detect processor */
-	speedstep_processor = speedstep_detect_processor();
-	if (!speedstep_processor) {
-		pr_debug("Intel(R) SpeedStep(TM) capable processor "
-				"not found\n");
-		return -ENODEV;
-	}
-
-	/* detect chipset */
-	if (!speedstep_detect_chipset()) {
-		pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
-				"(yet) available.\n");
-		return -ENODEV;
-	}
-
-	/* activate speedstep support */
-	if (speedstep_activate()) {
-		pci_dev_put(speedstep_chipset_dev);
-		return -EINVAL;
-	}
-
-	if (speedstep_find_register())
-		return -ENODEV;
-
-	return cpufreq_register_driver(&speedstep_driver);
-}
-
-
-/**
- * speedstep_exit - unregisters SpeedStep support
- *
- *   Unregisters SpeedStep support.
- */
-static void __exit speedstep_exit(void)
-{
-	pci_dev_put(speedstep_chipset_dev);
-	cpufreq_unregister_driver(&speedstep_driver);
-}
-
-
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
-		"Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
-		"with ICH-M southbridges.");
-MODULE_LICENSE("GPL");
-
-module_init(speedstep_init);
-module_exit(speedstep_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
deleted file mode 100644
index 8af2d2f..0000000
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  Library for common functions for Intel SpeedStep v.1 and v.2 support
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-
-#include <asm/msr.h>
-#include <asm/tsc.h>
-#include "speedstep-lib.h"
-
-#define PFX "speedstep-lib: "
-
-#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
-static int relaxed_check;
-#else
-#define relaxed_check 0
-#endif
-
-/*********************************************************************
- *                   GET PROCESSOR CORE SPEED IN KHZ                 *
- *********************************************************************/
-
-static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
-{
-	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
-	struct {
-		unsigned int ratio;	/* Frequency Multiplier (x10) */
-		u8 bitmap;		/* power on configuration bits
-					[27, 25:22] (in MSR 0x2a) */
-	} msr_decode_mult[] = {
-		{ 30, 0x01 },
-		{ 35, 0x05 },
-		{ 40, 0x02 },
-		{ 45, 0x06 },
-		{ 50, 0x00 },
-		{ 55, 0x04 },
-		{ 60, 0x0b },
-		{ 65, 0x0f },
-		{ 70, 0x09 },
-		{ 75, 0x0d },
-		{ 80, 0x0a },
-		{ 85, 0x26 },
-		{ 90, 0x20 },
-		{ 100, 0x2b },
-		{ 0, 0xff }	/* error or unknown value */
-	};
-
-	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
-	struct {
-		unsigned int value;	/* Front Side Bus speed in MHz */
-		u8 bitmap;		/* power on configuration bits [18: 19]
-					(in MSR 0x2a) */
-	} msr_decode_fsb[] = {
-		{  66, 0x0 },
-		{ 100, 0x2 },
-		{ 133, 0x1 },
-		{   0, 0xff}
-	};
-
-	u32 msr_lo, msr_tmp;
-	int i = 0, j = 0;
-
-	/* read MSR 0x2a - we only need the low 32 bits */
-	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
-	msr_tmp = msr_lo;
-
-	/* decode the FSB */
-	msr_tmp &= 0x00c0000;
-	msr_tmp >>= 18;
-	while (msr_tmp != msr_decode_fsb[i].bitmap) {
-		if (msr_decode_fsb[i].bitmap == 0xff)
-			return 0;
-		i++;
-	}
-
-	/* decode the multiplier */
-	if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
-		pr_debug("workaround for early PIIIs\n");
-		msr_lo &= 0x03c00000;
-	} else
-		msr_lo &= 0x0bc00000;
-	msr_lo >>= 22;
-	while (msr_lo != msr_decode_mult[j].bitmap) {
-		if (msr_decode_mult[j].bitmap == 0xff)
-			return 0;
-		j++;
-	}
-
-	pr_debug("speed is %u\n",
-		(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
-
-	return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
-}
-
-
-static unsigned int pentiumM_get_frequency(void)
-{
-	u32 msr_lo, msr_tmp;
-
-	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
-
-	/* see table B-2 of 24547212.pdf */
-	if (msr_lo & 0x00040000) {
-		printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
-				msr_lo, msr_tmp);
-		return 0;
-	}
-
-	msr_tmp = (msr_lo >> 22) & 0x1f;
-	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
-			msr_tmp, (msr_tmp * 100 * 1000));
-
-	return msr_tmp * 100 * 1000;
-}
-
-static unsigned int pentium_core_get_frequency(void)
-{
-	u32 fsb = 0;
-	u32 msr_lo, msr_tmp;
-	int ret;
-
-	rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
-	/* see table B-2 of 25366920.pdf */
-	switch (msr_lo & 0x07) {
-	case 5:
-		fsb = 100000;
-		break;
-	case 1:
-		fsb = 133333;
-		break;
-	case 3:
-		fsb = 166667;
-		break;
-	case 2:
-		fsb = 200000;
-		break;
-	case 0:
-		fsb = 266667;
-		break;
-	case 4:
-		fsb = 333333;
-		break;
-	default:
-		printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
-	}
-
-	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
-			msr_lo, msr_tmp);
-
-	msr_tmp = (msr_lo >> 22) & 0x1f;
-	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
-			msr_tmp, (msr_tmp * fsb));
-
-	ret = (msr_tmp * fsb);
-	return ret;
-}
-
-
-static unsigned int pentium4_get_frequency(void)
-{
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-	u32 msr_lo, msr_hi, mult;
-	unsigned int fsb = 0;
-	unsigned int ret;
-	u8 fsb_code;
-
-	/* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
-	 * to System Bus Frequency Ratio Field in the Processor Frequency
-	 * Configuration Register of the MSR. Therefore the current
-	 * frequency cannot be calculated and has to be measured.
-	 */
-	if (c->x86_model < 2)
-		return cpu_khz;
-
-	rdmsr(0x2c, msr_lo, msr_hi);
-
-	pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
-
-	/* decode the FSB: see IA-32 Intel (C) Architecture Software
-	 * Developer's Manual, Volume 3: System Prgramming Guide,
-	 * revision #12 in Table B-1: MSRs in the Pentium 4 and
-	 * Intel Xeon Processors, on page B-4 and B-5.
-	 */
-	fsb_code = (msr_lo >> 16) & 0x7;
-	switch (fsb_code) {
-	case 0:
-		fsb = 100 * 1000;
-		break;
-	case 1:
-		fsb = 13333 * 10;
-		break;
-	case 2:
-		fsb = 200 * 1000;
-		break;
-	}
-
-	if (!fsb)
-		printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
-				"Please send an e-mail to <linux@brodo.de>\n");
-
-	/* Multiplier. */
-	mult = msr_lo >> 24;
-
-	pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
-			fsb, mult, (fsb * mult));
-
-	ret = (fsb * mult);
-	return ret;
-}
-
-
-/* Warning: may get called from smp_call_function_single. */
-unsigned int speedstep_get_frequency(enum speedstep_processor processor)
-{
-	switch (processor) {
-	case SPEEDSTEP_CPU_PCORE:
-		return pentium_core_get_frequency();
-	case SPEEDSTEP_CPU_PM:
-		return pentiumM_get_frequency();
-	case SPEEDSTEP_CPU_P4D:
-	case SPEEDSTEP_CPU_P4M:
-		return pentium4_get_frequency();
-	case SPEEDSTEP_CPU_PIII_T:
-	case SPEEDSTEP_CPU_PIII_C:
-	case SPEEDSTEP_CPU_PIII_C_EARLY:
-		return pentium3_get_frequency(processor);
-	default:
-		return 0;
-	};
-	return 0;
-}
-EXPORT_SYMBOL_GPL(speedstep_get_frequency);
-
-
-/*********************************************************************
- *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
- *********************************************************************/
-
-unsigned int speedstep_detect_processor(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-	u32 ebx, msr_lo, msr_hi;
-
-	pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
-
-	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
-	    ((c->x86 != 6) && (c->x86 != 0xF)))
-		return 0;
-
-	if (c->x86 == 0xF) {
-		/* Intel Mobile Pentium 4-M
-		 * or Intel Mobile Pentium 4 with 533 MHz FSB */
-		if (c->x86_model != 2)
-			return 0;
-
-		ebx = cpuid_ebx(0x00000001);
-		ebx &= 0x000000FF;
-
-		pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
-
-		switch (c->x86_mask) {
-		case 4:
-			/*
-			 * B-stepping [M-P4-M]
-			 * sample has ebx = 0x0f, production has 0x0e.
-			 */
-			if ((ebx == 0x0e) || (ebx == 0x0f))
-				return SPEEDSTEP_CPU_P4M;
-			break;
-		case 7:
-			/*
-			 * C-stepping [M-P4-M]
-			 * needs to have ebx=0x0e, else it's a celeron:
-			 * cf. 25130917.pdf / page 7, footnote 5 even
-			 * though 25072120.pdf / page 7 doesn't say
-			 * samples are only of B-stepping...
-			 */
-			if (ebx == 0x0e)
-				return SPEEDSTEP_CPU_P4M;
-			break;
-		case 9:
-			/*
-			 * D-stepping [M-P4-M or M-P4/533]
-			 *
-			 * this is totally strange: CPUID 0x0F29 is
-			 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
-			 * The latter need to be sorted out as they don't
-			 * support speedstep.
-			 * Celerons with CPUID 0x0F29 may have either
-			 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
-			 * specific.
-			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
-			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
-			 * also, M-P4M HTs have ebx=0x8, too
-			 * For now, they are distinguished by the model_id
-			 * string
-			 */
-			if ((ebx == 0x0e) ||
-				(strstr(c->x86_model_id,
-				    "Mobile Intel(R) Pentium(R) 4") != NULL))
-				return SPEEDSTEP_CPU_P4M;
-			break;
-		default:
-			break;
-		}
-		return 0;
-	}
-
-	switch (c->x86_model) {
-	case 0x0B: /* Intel PIII [Tualatin] */
-		/* cpuid_ebx(1) is 0x04 for desktop PIII,
-		 * 0x06 for mobile PIII-M */
-		ebx = cpuid_ebx(0x00000001);
-		pr_debug("ebx is %x\n", ebx);
-
-		ebx &= 0x000000FF;
-
-		if (ebx != 0x06)
-			return 0;
-
-		/* So far all PIII-M processors support SpeedStep. See
-		 * Intel's 24540640.pdf of June 2003
-		 */
-		return SPEEDSTEP_CPU_PIII_T;
-
-	case 0x08: /* Intel PIII [Coppermine] */
-
-		/* all mobile PIII Coppermines have FSB 100 MHz
-		 * ==> sort out a few desktop PIIIs. */
-		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
-		pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
-				msr_lo, msr_hi);
-		msr_lo &= 0x00c0000;
-		if (msr_lo != 0x0080000)
-			return 0;
-
-		/*
-		 * If the processor is a mobile version,
-		 * platform ID has bit 50 set
-		 * it has SpeedStep technology if either
-		 * bit 56 or 57 is set
-		 */
-		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
-		pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
-				msr_lo, msr_hi);
-		if ((msr_hi & (1<<18)) &&
-		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
-			if (c->x86_mask == 0x01) {
-				pr_debug("early PIII version\n");
-				return SPEEDSTEP_CPU_PIII_C_EARLY;
-			} else
-				return SPEEDSTEP_CPU_PIII_C;
-		}
-
-	default:
-		return 0;
-	}
-}
-EXPORT_SYMBOL_GPL(speedstep_detect_processor);
-
-
-/*********************************************************************
- *                     DETECT SPEEDSTEP SPEEDS                       *
- *********************************************************************/
-
-unsigned int speedstep_get_freqs(enum speedstep_processor processor,
-				  unsigned int *low_speed,
-				  unsigned int *high_speed,
-				  unsigned int *transition_latency,
-				  void (*set_state) (unsigned int state))
-{
-	unsigned int prev_speed;
-	unsigned int ret = 0;
-	unsigned long flags;
-	struct timeval tv1, tv2;
-
-	if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
-		return -EINVAL;
-
-	pr_debug("trying to determine both speeds\n");
-
-	/* get current speed */
-	prev_speed = speedstep_get_frequency(processor);
-	if (!prev_speed)
-		return -EIO;
-
-	pr_debug("previous speed is %u\n", prev_speed);
-
-	local_irq_save(flags);
-
-	/* switch to low state */
-	set_state(SPEEDSTEP_LOW);
-	*low_speed = speedstep_get_frequency(processor);
-	if (!*low_speed) {
-		ret = -EIO;
-		goto out;
-	}
-
-	pr_debug("low speed is %u\n", *low_speed);
-
-	/* start latency measurement */
-	if (transition_latency)
-		do_gettimeofday(&tv1);
-
-	/* switch to high state */
-	set_state(SPEEDSTEP_HIGH);
-
-	/* end latency measurement */
-	if (transition_latency)
-		do_gettimeofday(&tv2);
-
-	*high_speed = speedstep_get_frequency(processor);
-	if (!*high_speed) {
-		ret = -EIO;
-		goto out;
-	}
-
-	pr_debug("high speed is %u\n", *high_speed);
-
-	if (*low_speed == *high_speed) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	/* switch to previous state, if necessary */
-	if (*high_speed != prev_speed)
-		set_state(SPEEDSTEP_LOW);
-
-	if (transition_latency) {
-		*transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
-			tv2.tv_usec - tv1.tv_usec;
-		pr_debug("transition latency is %u uSec\n", *transition_latency);
-
-		/* convert uSec to nSec and add 20% for safety reasons */
-		*transition_latency *= 1200;
-
-		/* check if the latency measurement is too high or too low
-		 * and set it to a safe value (500uSec) in that case
-		 */
-		if (*transition_latency > 10000000 ||
-		    *transition_latency < 50000) {
-			printk(KERN_WARNING PFX "frequency transition "
-					"measured seems out of range (%u "
-					"nSec), falling back to a safe one of"
-					"%u nSec.\n",
-					*transition_latency, 500000);
-			*transition_latency = 500000;
-		}
-	}
-
-out:
-	local_irq_restore(flags);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(speedstep_get_freqs);
-
-#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
-module_param(relaxed_check, int, 0444);
-MODULE_PARM_DESC(relaxed_check,
-		"Don't do all checks for speedstep capability.");
-#endif
-
-MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
-MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
deleted file mode 100644
index 70d9cea..0000000
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- *  Library for common functions for Intel SpeedStep v.1 and v.2 support
- *
- *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
- */
-
-
-
-/* processors */
-enum speedstep_processor {
-	SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001,  /* Coppermine core */
-	SPEEDSTEP_CPU_PIII_C	   = 0x00000002,  /* Coppermine core */
-	SPEEDSTEP_CPU_PIII_T	   = 0x00000003,  /* Tualatin core */
-	SPEEDSTEP_CPU_P4M	   = 0x00000004,  /* P4-M  */
-/* the following processors are not speedstep-capable and are not auto-detected
- * in speedstep_detect_processor(). However, their speed can be detected using
- * the speedstep_get_frequency() call. */
-	SPEEDSTEP_CPU_PM	   = 0xFFFFFF03,  /* Pentium M  */
-	SPEEDSTEP_CPU_P4D	   = 0xFFFFFF04,  /* desktop P4  */
-	SPEEDSTEP_CPU_PCORE	   = 0xFFFFFF05,  /* Core */
-};
-
-/* speedstep states -- only two of them */
-
-#define SPEEDSTEP_HIGH	0x00000000
-#define SPEEDSTEP_LOW	0x00000001
-
-
-/* detect a speedstep-capable processor */
-extern enum speedstep_processor speedstep_detect_processor(void);
-
-/* detect the current speed (in khz) of the processor */
-extern unsigned int speedstep_get_frequency(enum speedstep_processor processor);
-
-
-/* detect the low and high speeds of the processor. The callback
- * set_state"'s first argument is either SPEEDSTEP_HIGH or
- * SPEEDSTEP_LOW; the second argument is zero so that no
- * cpufreq_notify_transition calls are initiated.
- */
-extern unsigned int speedstep_get_freqs(enum speedstep_processor processor,
-	unsigned int *low_speed,
-	unsigned int *high_speed,
-	unsigned int *transition_latency,
-	void (*set_state) (unsigned int state));
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
deleted file mode 100644
index c76ead3..0000000
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Intel SpeedStep SMI driver.
- *
- * (C) 2003  Hiroshi Miura <miura@da-cha.org>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- *
- */
-
-
-/*********************************************************************
- *                        SPEEDSTEP - DEFINITIONS                    *
- *********************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <asm/ist.h>
-
-#include "speedstep-lib.h"
-
-/* speedstep system management interface port/command.
- *
- * These parameters are got from IST-SMI BIOS call.
- * If user gives it, these are used.
- *
- */
-static int smi_port;
-static int smi_cmd;
-static unsigned int smi_sig;
-
-/* info about the processor */
-static enum speedstep_processor speedstep_processor;
-
-/*
- * There are only two frequency states for each processor. Values
- * are in kHz for the time being.
- */
-static struct cpufreq_frequency_table speedstep_freqs[] = {
-	{SPEEDSTEP_HIGH,	0},
-	{SPEEDSTEP_LOW,		0},
-	{0,			CPUFREQ_TABLE_END},
-};
-
-#define GET_SPEEDSTEP_OWNER 0
-#define GET_SPEEDSTEP_STATE 1
-#define SET_SPEEDSTEP_STATE 2
-#define GET_SPEEDSTEP_FREQS 4
-
-/* how often shall the SMI call be tried if it failed, e.g. because
- * of DMA activity going on? */
-#define SMI_TRIES 5
-
-/**
- * speedstep_smi_ownership
- */
-static int speedstep_smi_ownership(void)
-{
-	u32 command, result, magic, dummy;
-	u32 function = GET_SPEEDSTEP_OWNER;
-	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
-
-	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
-	magic = virt_to_phys(magic_data);
-
-	pr_debug("trying to obtain ownership with command %x at port %x\n",
-			command, smi_port);
-
-	__asm__ __volatile__(
-		"push %%ebp\n"
-		"out %%al, (%%dx)\n"
-		"pop %%ebp\n"
-		: "=D" (result),
-		  "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
-		  "=S" (dummy)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
-		  "D" (0), "S" (magic)
-		: "memory"
-	);
-
-	pr_debug("result is %x\n", result);
-
-	return result;
-}
-
-/**
- * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
- * @low: the low frequency value is placed here
- * @high: the high frequency value is placed here
- *
- * Only available on later SpeedStep-enabled systems, returns false results or
- * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
- * shows that the latter occurs if !(ist_info.event & 0xFFFF).
- */
-static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
-{
-	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
-	u32 state = 0;
-	u32 function = GET_SPEEDSTEP_FREQS;
-
-	if (!(ist_info.event & 0xFFFF)) {
-		pr_debug("bug #1422 -- can't read freqs from BIOS\n");
-		return -ENODEV;
-	}
-
-	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
-
-	pr_debug("trying to determine frequencies with command %x at port %x\n",
-			command, smi_port);
-
-	__asm__ __volatile__(
-		"push %%ebp\n"
-		"out %%al, (%%dx)\n"
-		"pop %%ebp"
-		: "=a" (result),
-		  "=b" (high_mhz),
-		  "=c" (low_mhz),
-		  "=d" (state), "=D" (edi), "=S" (dummy)
-		: "a" (command),
-		  "b" (function),
-		  "c" (state),
-		  "d" (smi_port), "S" (0), "D" (0)
-	);
-
-	pr_debug("result %x, low_freq %u, high_freq %u\n",
-			result, low_mhz, high_mhz);
-
-	/* abort if results are obviously incorrect... */
-	if ((high_mhz + low_mhz) < 600)
-		return -EINVAL;
-
-	*high = high_mhz * 1000;
-	*low  = low_mhz  * 1000;
-
-	return result;
-}
-
-/**
- * speedstep_get_state - set the SpeedStep state
- * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
- *
- */
-static int speedstep_get_state(void)
-{
-	u32 function = GET_SPEEDSTEP_STATE;
-	u32 result, state, edi, command, dummy;
-
-	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
-
-	pr_debug("trying to determine current setting with command %x "
-		"at port %x\n", command, smi_port);
-
-	__asm__ __volatile__(
-		"push %%ebp\n"
-		"out %%al, (%%dx)\n"
-		"pop %%ebp\n"
-		: "=a" (result),
-		  "=b" (state), "=D" (edi),
-		  "=c" (dummy), "=d" (dummy), "=S" (dummy)
-		: "a" (command), "b" (function), "c" (0),
-		  "d" (smi_port), "S" (0), "D" (0)
-	);
-
-	pr_debug("state is %x, result is %x\n", state, result);
-
-	return state & 1;
-}
-
-
-/**
- * speedstep_set_state - set the SpeedStep state
- * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
- *
- */
-static void speedstep_set_state(unsigned int state)
-{
-	unsigned int result = 0, command, new_state, dummy;
-	unsigned long flags;
-	unsigned int function = SET_SPEEDSTEP_STATE;
-	unsigned int retry = 0;
-
-	if (state > 0x1)
-		return;
-
-	/* Disable IRQs */
-	local_irq_save(flags);
-
-	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
-
-	pr_debug("trying to set frequency to state %u "
-		"with command %x at port %x\n",
-		state, command, smi_port);
-
-	do {
-		if (retry) {
-			pr_debug("retry %u, previous result %u, waiting...\n",
-					retry, result);
-			mdelay(retry * 50);
-		}
-		retry++;
-		__asm__ __volatile__(
-			"push %%ebp\n"
-			"out %%al, (%%dx)\n"
-			"pop %%ebp"
-			: "=b" (new_state), "=D" (result),
-			  "=c" (dummy), "=a" (dummy),
-			  "=d" (dummy), "=S" (dummy)
-			: "a" (command), "b" (function), "c" (state),
-			  "d" (smi_port), "S" (0), "D" (0)
-			);
-	} while ((new_state != state) && (retry <= SMI_TRIES));
-
-	/* enable IRQs */
-	local_irq_restore(flags);
-
-	if (new_state == state)
-		pr_debug("change to %u MHz succeeded after %u tries "
-			"with result %u\n",
-			(speedstep_freqs[new_state].frequency / 1000),
-			retry, result);
-	else
-		printk(KERN_ERR "cpufreq: change to state %u "
-			"failed with new_state %u and result %u\n",
-			state, new_state, result);
-
-	return;
-}
-
-
-/**
- * speedstep_target - set a new CPUFreq policy
- * @policy: new policy
- * @target_freq: new freq
- * @relation:
- *
- * Sets a new CPUFreq policy/freq.
- */
-static int speedstep_target(struct cpufreq_policy *policy,
-			unsigned int target_freq, unsigned int relation)
-{
-	unsigned int newstate = 0;
-	struct cpufreq_freqs freqs;
-
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
-	freqs.new = speedstep_freqs[newstate].frequency;
-	freqs.cpu = 0; /* speedstep.c is UP only driver */
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	speedstep_set_state(newstate);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-
-/**
- * speedstep_verify - verifies a new CPUFreq policy
- * @policy: new policy
- *
- * Limit must be within speedstep_low_freq and speedstep_high_freq, with
- * at least one border included.
- */
-static int speedstep_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
-}
-
-
-static int speedstep_cpu_init(struct cpufreq_policy *policy)
-{
-	int result;
-	unsigned int speed, state;
-	unsigned int *low, *high;
-
-	/* capability check */
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	result = speedstep_smi_ownership();
-	if (result) {
-		pr_debug("fails in acquiring ownership of a SMI interface.\n");
-		return -EINVAL;
-	}
-
-	/* detect low and high frequency */
-	low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
-	high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
-
-	result = speedstep_smi_get_freqs(low, high);
-	if (result) {
-		/* fall back to speedstep_lib.c dection mechanism:
-		 * try both states out */
-		pr_debug("could not detect low and high frequencies "
-				"by SMI call.\n");
-		result = speedstep_get_freqs(speedstep_processor,
-				low, high,
-				NULL,
-				&speedstep_set_state);
-
-		if (result) {
-			pr_debug("could not detect two different speeds"
-					" -- aborting.\n");
-			return result;
-		} else
-			pr_debug("workaround worked.\n");
-	}
-
-	/* get current speed setting */
-	state = speedstep_get_state();
-	speed = speedstep_freqs[state].frequency;
-
-	pr_debug("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
-		? "low" : "high",
-		(speed / 1000));
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	policy->cur = speed;
-
-	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
-	if (result)
-		return result;
-
-	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
-
-	return 0;
-}
-
-static int speedstep_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static unsigned int speedstep_get(unsigned int cpu)
-{
-	if (cpu)
-		return -ENODEV;
-	return speedstep_get_frequency(speedstep_processor);
-}
-
-
-static int speedstep_resume(struct cpufreq_policy *policy)
-{
-	int result = speedstep_smi_ownership();
-
-	if (result)
-		pr_debug("fails in re-acquiring ownership of a SMI interface.\n");
-
-	return result;
-}
-
-static struct freq_attr *speedstep_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver speedstep_driver = {
-	.name		= "speedstep-smi",
-	.verify		= speedstep_verify,
-	.target		= speedstep_target,
-	.init		= speedstep_cpu_init,
-	.exit		= speedstep_cpu_exit,
-	.get		= speedstep_get,
-	.resume		= speedstep_resume,
-	.owner		= THIS_MODULE,
-	.attr		= speedstep_attr,
-};
-
-/**
- * speedstep_init - initializes the SpeedStep CPUFreq driver
- *
- *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
- * BIOS, -EINVAL on problems during initiatization, and zero on
- * success.
- */
-static int __init speedstep_init(void)
-{
-	speedstep_processor = speedstep_detect_processor();
-
-	switch (speedstep_processor) {
-	case SPEEDSTEP_CPU_PIII_T:
-	case SPEEDSTEP_CPU_PIII_C:
-	case SPEEDSTEP_CPU_PIII_C_EARLY:
-		break;
-	default:
-		speedstep_processor = 0;
-	}
-
-	if (!speedstep_processor) {
-		pr_debug("No supported Intel CPU detected.\n");
-		return -ENODEV;
-	}
-
-	pr_debug("signature:0x%.8ulx, command:0x%.8ulx, "
-		"event:0x%.8ulx, perf_level:0x%.8ulx.\n",
-		ist_info.signature, ist_info.command,
-		ist_info.event, ist_info.perf_level);
-
-	/* Error if no IST-SMI BIOS or no PARM
-		 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
-	if ((ist_info.signature !=  0x47534943) && (
-	    (smi_port == 0) || (smi_cmd == 0)))
-		return -ENODEV;
-
-	if (smi_sig == 1)
-		smi_sig = 0x47534943;
-	else
-		smi_sig = ist_info.signature;
-
-	/* setup smi_port from MODLULE_PARM or BIOS */
-	if ((smi_port > 0xff) || (smi_port < 0))
-		return -EINVAL;
-	else if (smi_port == 0)
-		smi_port = ist_info.command & 0xff;
-
-	if ((smi_cmd > 0xff) || (smi_cmd < 0))
-		return -EINVAL;
-	else if (smi_cmd == 0)
-		smi_cmd = (ist_info.command >> 16) & 0xff;
-
-	return cpufreq_register_driver(&speedstep_driver);
-}
-
-
-/**
- * speedstep_exit - unregisters SpeedStep support
- *
- *   Unregisters SpeedStep support.
- */
-static void __exit speedstep_exit(void)
-{
-	cpufreq_unregister_driver(&speedstep_driver);
-}
-
-module_param(smi_port, int, 0444);
-module_param(smi_cmd,  int, 0444);
-module_param(smi_sig, uint, 0444);
-
-MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
-		"-- Intel's default setting is 0xb2");
-MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
-		"-- Intel's default setting is 0x82");
-MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
-		"SMI interface.");
-
-MODULE_AUTHOR("Hiroshi Miura");
-MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
-MODULE_LICENSE("GPL");
-
-module_init(speedstep_init);
-module_exit(speedstep_exit);