Merge remote-tracking branch 'agust/next' into next

From Anatolij Gustschin:
<<
There are some changes for mpc5121 generic platform code
to support mpc5125 SoC and DTS files for ac14xx and
MPC5125-TWR boards.
>>

12 files changed, 674 insertions, 24 deletions

diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
new file mode 100644
index 0000000..a27a460
--- /dev/null
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -0,0 +1,392 @@
+/*
+ * Device Tree Source for the MPC5121e based ac14xx board
+ *
+ * Copyright 2012 Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/include/ "mpc5121.dtsi"
+
+/ {
+	model = "ac14xx";
+	compatible = "ifm,ac14xx", "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial7;
+		spi4 = &spi4;
+		spi5 = &spi5;
+	};
+
+	cpus {
+		PowerPC,5121@0 {
+			timebase-frequency = <40000000>;	/*  40 MHz (csb/4) */
+			bus-frequency = <160000000>;		/* 160 MHz csb bus */
+			clock-frequency = <400000000>;		/* 400 MHz ppc core */
+		};
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;			/* 256MB at 0 */
+	};
+
+	nfc@40000000 {
+		status = "disabled";
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xfc000000 0x04000000	/* CS0: NOR flash */
+			  0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
+			  0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
+			  0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
+			  0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
+			  0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x00000000 0x04000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "dtb-kernel-production";
+				reg = <0x00000000 0x00400000>;
+			};
+			partition@1 {
+				label = "filesystem-production";
+				reg = <0x00400000 0x03400000>;
+			};
+
+			partition@2 {
+				label = "recovery";
+				reg = <0x03800000 0x00700000>;
+			};
+
+			partition@3 {
+				label = "uboot-code";
+				reg = <0x03f00000 0x00040000>;
+			};
+			partition@4 {
+				label = "uboot-env1";
+				reg = <0x03f40000 0x00020000>;
+			};
+			partition@5 {
+				label = "uboot-env2";
+				reg = <0x03f60000 0x00020000>;
+			};
+		};
+
+		fram@1,0 {
+			compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
+			reg = <1 0x00000000 0x00010000>;
+		};
+
+		asi@2,0 {
+			/* masters mapping: CS, CS offset, size */
+			reg = <2 0x00000000 0x00080000
+			       6 0x00000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ifm,ac14xx-asi-fpga";
+			gpios = <
+				&gpio_pic 26 0	/* prog */
+				&gpio_pic 27 0	/* done */
+				&gpio_pic 10 0	/* reset */
+				>;
+
+			master@1 {
+				interrupts = <20 0x2>;
+				interrupt-parent = <&gpio_pic>;
+				chipselect = <2 0x00009000 0x00009100>;
+				label = "AS-i master 1";
+			};
+
+			master@2 {
+				interrupts = <21 0x2>;
+				interrupt-parent = <&gpio_pic>;
+				chipselect = <6 0x00009000 0x00009100>;
+				label = "AS-i master 2";
+			};
+		};
+
+		netx@3,0 {
+			compatible = "ifm,netx";
+			reg = <0x3 0x00000000 0x00020000>;
+			chipselect = <3 0x00101140 0x00203100>;
+			interrupts = <17 0x8>;
+			gpios = <&gpio_pic 15 0>;
+		};
+
+		safety@5,0 {
+			compatible = "ifm,safety";
+			reg = <0x5 0x00000000 0x00010000>;
+			chipselect = <5 0x00009000 0x00009100>;
+			interrupts = <22 0x2>;
+			interrupt-parent = <&gpio_pic>;
+			gpios = <
+				&gpio_pic 12 0	/* prog */
+				&gpio_pic 11 0	/* done */
+				>;
+		};
+	};
+
+	soc@80000000 {
+
+		clock@f00 {
+			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
+		};
+
+		/*
+		 * GPIO PIC:
+		 * interrupts cell = <pin nr, sense>
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		gpio_pic: gpio@1100 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sdhc@1500 {
+			cd-gpios = <&gpio_pic 23 0>;	/* card detect */
+			wp-gpios = <&gpio_pic 24 0>;	/* write protect */
+			wp-inverted;			/* WP active high */
+		};
+
+		i2c@1700 {
+			/* use Fast-mode */
+			clock-frequency = <400000>;
+
+			at24@30 {
+				compatible = "at24,24c01";
+				reg = <0x30>;
+			};
+
+			at24@31 {
+				compatible = "at24,24c01";
+				reg = <0x31>;
+			};
+
+			temp@48 {
+				compatible = "ad,ad7414";
+				reg = <0x48>;
+			};
+
+			at24@50 {
+				compatible = "at24,24c01";
+				reg = <0x50>;
+			};
+
+			at24@51 {
+				compatible = "at24,24c01";
+				reg = <0x51>;
+			};
+
+			at24@52 {
+				compatible = "at24,24c01";
+				reg = <0x52>;
+			};
+
+			at24@53 {
+				compatible = "at24,24c01";
+				reg = <0x53>;
+			};
+
+			at24@54 {
+				compatible = "at24,24c01";
+				reg = <0x54>;
+			};
+
+			at24@55 {
+				compatible = "at24,24c01";
+				reg = <0x55>;
+			};
+
+			at24@56 {
+				compatible = "at24,24c01";
+				reg = <0x56>;
+			};
+
+			at24@57 {
+				compatible = "at24,24c01";
+				reg = <0x57>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		axe_pic: axe-base@2000 {
+			compatible = "fsl,mpc5121-axe-base";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		axe-app {
+			compatible = "fsl,mpc5121-axe-app";
+			interrupt-parent = <&axe_pic>;
+			interrupts = <
+					/* soft interrupts */
+					0 0x0	1 0x0	2 0x0	3 0x0
+					4 0x0	5 0x0	6 0x0	7 0x0
+					/* fifo interrupts */
+					8 0x0	9 0x0	10 0x0	11 0x0
+				>;
+		};
+
+		display@2100 {
+			edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
+				0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
+				1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
+				01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
+				21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
+				3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
+				54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
+				00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
+		};
+
+		can@2300 {
+			status = "disabled";
+		};
+
+		can@2380 {
+			status = "disabled";
+		};
+
+		viu@2400 {
+			status = "disabled";
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@1f {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		enet: ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		usb@3000 {
+			status = "disabled";
+		};
+
+		usb@4000 {
+			status = "disabled";
+		};
+
+		/* PSC3 serial port A, aka ttyPSC0 */
+		serial0: psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <512>;
+			fsl,tx-fifo-size = <512>;
+		};
+
+		/* PSC4 in SPI mode */
+		spi4: psc@11400 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <768>;
+			fsl,tx-fifo-size = <768>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+			cs-gpios = <&gpio_pic 25 0>;
+
+			flash: m25p128@0 {
+				compatible = "st,m25p128";
+				spi-max-frequency = <20000000>;
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "spi-flash0";
+					reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+
+		/* PSC5 in SPI mode */
+		spi5: psc@11500 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			fsl,mode = "spi-master";
+			fsl,rx-fifo-size = <128>;
+			fsl,tx-fifo-size = <128>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lcd@0 {
+				compatible = "ilitek,ili922x";
+				reg = <0>;
+				spi-max-frequency = <100000>;
+				spi-cpol;
+				spi-cpha;
+			};
+		};
+
+		/* PSC7 serial port C, aka ttyPSC2 */
+		serial7: psc@11700 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <512>;
+			fsl,tx-fifo-size = <512>;
+		};
+
+		matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <1>;
+			gpio-activelow;
+			col-gpios-binary;
+			col-switch-delay-ms = <200>;
+
+			col-gpios = <&gpio_pic 1 0>;	/* pin1 */
+
+			row-gpios = <&gpio_pic 2 0	/* pin2 */
+				     &gpio_pic 3 0	/* pin3 */
+				     &gpio_pic 4 0>;	/* pin4 */
+
+			linux,keymap = <0x0000006e	/* FN LEFT */
+					0x01000067	/* UP */
+					0x02000066	/* FN RIGHT */
+					0x00010069	/* LEFT */
+					0x0101006a	/* DOWN */
+					0x0201006c>;	/* RIGHT */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		backlight {
+			label = "backlight";
+			gpios = <&gpio_pic 0 0>;
+			default-state = "keep";
+		};
+		green {
+			label = "green";
+			gpios = <&gpio_pic 18 0>;
+			default-state = "keep";
+		};
+		red {
+			label = "red";
+			gpios = <&gpio_pic 19 0>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index 723e292..2e82d0e 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -384,7 +384,7 @@
 			interrupts = <40 0x8>;
 		};
 
-		dma@14000 {
+		dma0: dma@14000 {
 			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index f269b13..7d3cb79 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "mpc5121ads";
-	compatible = "fsl,mpc5121ads";
+	compatible = "fsl,mpc5121ads", "fsl,mpc5121";
 
 	nfc@40000000 {
 		/*
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
new file mode 100644
index 0000000..4177b62
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -0,0 +1,233 @@
+/*
+ * STx/Freescale ADS5125 MPC5125 silicon
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
+ *
+ * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
+ * Copyright (C) 2013 Sirius Electronic Systems
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "mpc5125twr"; // In BSP "mpc5125ads"
+	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5125@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+			bus-frequency = <198000000>;	// 198 MHz csb bus
+			clock-frequency = <396000000>;	// 396 MHz ppc core
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	// 66 MHz ips bus
+
+		// IPIC
+		// interrupts cell = <intr #, sense>
+		// sense values match linux IORESOURCE_IRQ_* defines:
+		// sense == 8: Level, low assertion
+		// sense == 2: Edge, high-to-low change
+		//
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5125-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{  // Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+		};
+
+		gpio0: gpio@1100 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1100 0x080>;
+			interrupts = <78 0x8>;
+		};
+
+		gpio1: gpio@1180 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1180 0x080>;
+			interrupts = <86 0x8>;
+		};
+
+		can@1300 { // CAN rev.2
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <12 0x8>;
+			reg = <0x1300 0x80>;
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <13 0x8>;
+			reg = <0x1380 0x80>;
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			interrupts = <8 0x8>;
+			reg = <0x1500 0x100>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <0x9 0x8>;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <0xa 0x8>;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <0xb 0x8>;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		diu@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			compatible = "fsl,mpc5125-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			phy-handle = < &phy0 >;
+			phy-connection-type = "rmii";
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5125-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		// 5125 PSCs are not 52xx or 5121 PSC compatible
+		// PSC1 uart0 aka ttyPSC0
+		serial@11100 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		// PSC9 uart1 aka ttyPSC1
+		serial@11900 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 0b06947..7433740 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "pdm360ng";
-	compatible = "ifm,pdm360ng";
+	compatible = "ifm,pdm360ng", "fsl,mpc5121";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 211fcc9..0d0d981 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC512x=y
 CONFIG_MPC5121_ADS=y
-CONFIG_MPC5121_GENERIC=y
+CONFIG_MPC512x_GENERIC=y
 CONFIG_PDM360NG=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_NO_HZ=y
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index c169998..eb46203 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -15,16 +15,16 @@ config MPC5121_ADS
 	help
 	  This option enables support for the MPC5121E ADS board.
 
-config MPC5121_GENERIC
-	bool "Generic support for simple MPC5121 based boards"
+config MPC512x_GENERIC
+	bool "Generic support for simple MPC512x based boards"
 	depends on PPC_MPC512x
 	select DEFAULT_UIMAGE
 	help
-	  This option enables support for simple MPC5121 based boards
+	  This option enables support for simple MPC512x based boards
 	  which do not need custom platform specific setup.
 
 	  Compatible boards include:  Protonic LVT base boards (ZANMCU
-	  and VICVT2).
+	  and VICVT2), Freescale MPC5125 Tower system.
 
 config PDM360NG
 	bool "ifm PDM360NG board"
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 4efc1c4..72fb934 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -3,5 +3,5 @@
 #
 obj-y				+= clock.o mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
-obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
+obj-$(CONFIG_MPC512x_GENERIC)	+= mpc512x_generic.o
 obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 52d57d2..e504166 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -29,6 +29,8 @@
 #include <asm/mpc5121.h>
 #include <asm/clk_interface.h>
 
+#include "mpc512x.h"
+
 #undef CLK_DEBUG
 
 static int clocks_initialized;
@@ -683,8 +685,13 @@ static void psc_clks_init(void)
 	struct device_node *np;
 	struct platform_device *ofdev;
 	u32 reg;
+	const char *psc_compat;
+
+	psc_compat = mpc512x_select_psc_compat();
+	if (!psc_compat)
+		return;
 
-	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+	for_each_compatible_node(np, NULL, psc_compat) {
 		if (!of_property_read_u32(np, "reg", &reg)) {
 			int pscnum = (reg & 0xf00) >> 8;
 			struct clk *clk = psc_dev_clk(pscnum);
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index c32b399..0a8e600 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -15,6 +15,7 @@ extern void __init mpc512x_init_IRQ(void);
 extern void __init mpc512x_init(void);
 extern int __init mpc5121_clk_init(void);
 void __init mpc512x_declare_of_platform_devices(void);
+extern const char *mpc512x_select_psc_compat(void);
 extern void mpc512x_restart(char *cmd);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc512x_generic.c
index ca1ca66..5fb919b 100644
--- a/arch/powerpc/platforms/512x/mpc5121_generic.c
+++ b/arch/powerpc/platforms/512x/mpc512x_generic.c
@@ -4,7 +4,7 @@
  * Author: John Rigby, <jrigby@freescale.com>
  *
  * Description:
- * MPC5121 SoC setup
+ * MPC512x SoC setup
  *
  * This is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by
@@ -28,20 +28,22 @@
  */
 static const char * const board[] __initconst = {
 	"prt,prtlvt",
+	"fsl,mpc5125ads",
+	"ifm,ac14xx",
 	NULL
 };
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
-static int __init mpc5121_generic_probe(void)
+static int __init mpc512x_generic_probe(void)
 {
 	return of_flat_dt_match(of_get_flat_dt_root(), board);
 }
 
-define_machine(mpc5121_generic) {
-	.name			= "MPC5121 generic",
-	.probe			= mpc5121_generic_probe,
+define_machine(mpc512x_generic) {
+	.name			= "MPC512x generic",
+	.probe			= mpc512x_generic_probe,
 	.init			= mpc512x_init,
 	.init_early		= mpc512x_init_diu,
 	.setup_arch		= mpc512x_setup_diu,
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index d30235b..7642cd7 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -330,26 +330,34 @@ void __init mpc512x_init_IRQ(void)
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "fsl,mpc5121-immr", },
 	{ .compatible = "fsl,mpc5121-localbus", },
+	{ .compatible = "fsl,mpc5121-mbx", },
+	{ .compatible = "fsl,mpc5121-nfc", },
+	{ .compatible = "fsl,mpc5121-sram", },
+	{ .compatible = "fsl,mpc5121-pci", },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
 void __init mpc512x_declare_of_platform_devices(void)
 {
-	struct device_node *np;
-
 	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
 		printk(KERN_ERR __FILE__ ": "
 			"Error while probing of_platform bus\n");
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc");
-	if (np) {
-		of_platform_device_create(np, NULL, NULL);
-		of_node_put(np);
-	}
 }
 
 #define DEFAULT_FIFO_SIZE 16
 
+const char *mpc512x_select_psc_compat(void)
+{
+	if (of_machine_is_compatible("fsl,mpc5121"))
+		return "fsl,mpc5121-psc";
+
+	if (of_machine_is_compatible("fsl,mpc5125"))
+		return "fsl,mpc5125-psc";
+
+	return NULL;
+}
+
 static unsigned int __init get_fifo_size(struct device_node *np,
 					 char *prop_name)
 {
@@ -375,9 +383,16 @@ void __init mpc512x_psc_fifo_init(void)
 	void __iomem *psc;
 	unsigned int tx_fifo_size;
 	unsigned int rx_fifo_size;
+	const char *psc_compat;
 	int fifobase = 0; /* current fifo address in 32 bit words */
 
-	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+	psc_compat = mpc512x_select_psc_compat();
+	if (!psc_compat) {
+		pr_err("%s: no compatible devices found\n", __func__);
+		return;
+	}
+
+	for_each_compatible_node(np, NULL, psc_compat) {
 		tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
 		rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");