Merge branches 'master' and 'devel' into for-linus

Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig

259 files changed, 13286 insertions, 4478 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 05fc7cf..9295110 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -644,6 +644,7 @@ config ARCH_S3C2410
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -673,6 +674,8 @@ config ARCH_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
@@ -681,7 +684,10 @@ config ARCH_S5P6440
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select HAVE_S3C2410_WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C_RTC
 	help
 	  Samsung S5P6440 CPU based systems
 
@@ -691,6 +697,7 @@ config ARCH_S5P6442
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5P6442 CPU based systems
 
@@ -701,6 +708,9 @@ config ARCH_S5PC100
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
 
@@ -711,9 +721,21 @@ config ARCH_S5PV210
 	select HAVE_CLK
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
+config ARCH_S5PV310
+	bool "Samsung S5PV310/S5PC210"
+	select CPU_V7
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select GENERIC_CLOCKEVENTS
+	help
+	  Samsung S5PV310 series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -915,6 +937,8 @@ source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
+source "arch/arm/mach-s5pv310/Kconfig"
+
 source "arch/arm/mach-shmobile/Kconfig"
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
@@ -1120,11 +1144,11 @@ config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
+		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || \
-		 ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
+	select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
+		 ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1194,10 +1218,10 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
 		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
+		ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	default y
-	select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || \\
-		ARCH_U8500 || ARCH_TEGRA
+	select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
+		ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1208,7 +1232,8 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a8d4dca..99b8200 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -174,6 +174,7 @@ machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
+machine-$(CONFIG_ARCH_S5PV310)		:= s5pv310
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7636c9b..68775e3 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -33,7 +33,7 @@ ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif
 
-ifeq ($(CONFIG_PXA_SHARPSL),y)
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
 OBJS		+= head-sharpsl.o
 endif
 
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 7974baa..6c09135 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -263,14 +263,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
 	return 0;
 }
 
-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
-		__func__, dma_addr, size);
-	return (dev->bus == &pci_bus_type) &&
-		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
-}
-
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
deleted file mode 100644
index 22c2d14..0000000
--- a/arch/arm/configs/s5pc110_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PV210=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC110=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 1753836..0488a1e 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_S5PV210=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_DEV_FB=y
+CONFIG_S5PV210_SETUP_FB_24BPP=y
+CONFIG_MACH_AQUILA=y
+CONFIG_MACH_GONI=y
+CONFIG_MACH_SMDKC110=y
 CONFIG_MACH_SMDKV210=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 69ce072..b5ccc6a 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -298,7 +298,15 @@ extern void dmabounce_unregister_dev(struct device *);
  * DMA access and 1 if the buffer needs to be bounced.
  *
  */
+#ifdef CONFIG_SA1111
 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#else
+static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
+				   size_t size)
+{
+	return 0;
+}
+#endif
 
 /*
  * The DMA API, implemented by dmabounce.c.  See below for descriptions.
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 6750b8e..5747a8b 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -59,6 +59,8 @@ typedef struct user_fp elf_fpregset_t;
 
 #define R_ARM_THM_CALL		10
 #define R_ARM_THM_JUMP24	30
+#define R_ARM_THM_MOVW_ABS_NC	47
+#define R_ARM_THM_MOVT_ABS	48
 
 /*
  * These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index 46492a63..ebb3cea 100644
--- a/arch/arm/include/asm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -22,18 +22,23 @@
 #define SCOOP_GPWR 0x24
 #define SCOOP_GPRR 0x28
 
-#define SCOOP_GPCR_PA22	( 1 << 12 )
-#define SCOOP_GPCR_PA21	( 1 << 11 )
-#define SCOOP_GPCR_PA20	( 1 << 10 )
-#define SCOOP_GPCR_PA19	( 1 << 9 )
-#define SCOOP_GPCR_PA18	( 1 << 8 )
-#define SCOOP_GPCR_PA17	( 1 << 7 )
-#define SCOOP_GPCR_PA16	( 1 << 6 )
-#define SCOOP_GPCR_PA15	( 1 << 5 )
-#define SCOOP_GPCR_PA14	( 1 << 4 )
-#define SCOOP_GPCR_PA13	( 1 << 3 )
-#define SCOOP_GPCR_PA12	( 1 << 2 )
-#define SCOOP_GPCR_PA11	( 1 << 1 )
+#define SCOOP_CPR_OUT	(1 << 7)
+#define SCOOP_CPR_SD_3V	(1 << 2)
+#define SCOOP_CPR_CF_XV	(1 << 1)
+#define SCOOP_CPR_CF_3V	(1 << 0)
+
+#define SCOOP_GPCR_PA22	(1 << 12)
+#define SCOOP_GPCR_PA21	(1 << 11)
+#define SCOOP_GPCR_PA20	(1 << 10)
+#define SCOOP_GPCR_PA19	(1 << 9)
+#define SCOOP_GPCR_PA18	(1 << 8)
+#define SCOOP_GPCR_PA17	(1 << 7)
+#define SCOOP_GPCR_PA16	(1 << 6)
+#define SCOOP_GPCR_PA15	(1 << 5)
+#define SCOOP_GPCR_PA14	(1 << 4)
+#define SCOOP_GPCR_PA13	(1 << 3)
+#define SCOOP_GPCR_PA12	(1 << 2)
+#define SCOOP_GPCR_PA11	(1 << 1)
 
 struct scoop_config {
 	unsigned short io_out;
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index c628bdf..6b46058 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,7 +102,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+#ifdef CONFIG_THUMB2_KERNEL
 		u32 upper, lower, sign, j1, j2;
+#endif
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -185,6 +187,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+#ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
 			upper = *(u16 *)loc;
@@ -233,9 +236,40 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
 						  (j1 << 13) | (j2 << 11) |
 						  ((offset >> 1) & 0x07ff));
+			break;
+
+		case R_ARM_THM_MOVW_ABS_NC:
+		case R_ARM_THM_MOVT_ABS:
 			upper = *(u16 *)loc;
 			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * MOVT/MOVW instructions encoding in Thumb-2:
+			 *
+			 * i	= upper[10]
+			 * imm4	= upper[3:0]
+			 * imm3	= lower[14:12]
+			 * imm8	= lower[7:0]
+			 *
+			 * imm16 = imm4:i:imm3:imm8
+			 */
+			offset = ((upper & 0x000f) << 12) |
+				((upper & 0x0400) << 1) |
+				((lower & 0x7000) >> 4) | (lower & 0x00ff);
+			offset = (offset ^ 0x8000) - 0x8000;
+			offset += sym->st_value;
+
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u16 *)loc = (u16)((upper & 0xfbf0) |
+					    ((offset & 0xf000) >> 12) |
+					    ((offset & 0x0800) >> 1));
+			*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
+						  ((offset & 0x0700) << 4) |
+						  (offset & 0x00ff));
 			break;
+#endif
 
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index b3ebe9e..d0b7d87 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -69,13 +69,6 @@
 #define SYSPLD_VIRT_BASE	0xfe000000
 #define SYSPLD_BASE		SYSPLD_VIRT_BASE
 
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE		IO_BASE
-
-#endif
-
-
 #if  defined (CONFIG_ARCH_AUTCPU12)
 
 #define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 515b75c..6f066ee 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -2,6 +2,13 @@ if ARCH_GEMINI
 
 menu "Cortina Systems Gemini Implementations"
 
+config MACH_NAS4220B
+	bool "Raidsonic NAS-4220-B"
+	select GEMINI_MEM_SWAP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Raidsonic NAS-4220-B.
+
 config MACH_RUT100
 	bool "Teltonika RUT100"
 	select GEMINI_MEM_SWAP
@@ -9,6 +16,20 @@ config MACH_RUT100
 	  Say Y here if you intend to run this kernel on a
 	  Teltonika 3G Router RUT100.
 
+config MACH_WBD111
+	bool "Wiliboard WBD-111"
+	select GEMINI_MEM_SWAP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Wiliboard WBD-111.
+
+config MACH_WBD222
+        bool "Wiliboard WBD-222"
+        select GEMINI_MEM_SWAP
+        help
+          Say Y here if you intend to run this kernel on a
+          Wiliboard WBD-222.
+
 endmenu
 
 config GEMINI_MEM_SWAP
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index 719505b..c5b24b9 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -7,4 +7,7 @@
 obj-y			:= irq.o mm.o time.o devices.o gpio.o
 
 # Board-specific support
+obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o
 obj-$(CONFIG_MACH_RUT100)	+= board-rut1xx.o
+obj-$(CONFIG_MACH_WBD111)	+= board-wbd111.o
+obj-$(CONFIG_MACH_WBD222)	+= board-wbd222.o
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
new file mode 100644
index 0000000..01f1d6d
--- /dev/null
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -0,0 +1,111 @@
+/*
+ *  Support for Raidsonic NAS-4220-B
+ *
+ *  Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ *
+ * based on rut1xx.c
+ *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+#include "common.h"
+
+static struct sys_timer ib4220b_timer = {
+	.init	= gemini_timer_init,
+};
+
+static struct gpio_led ib4220b_leds[] = {
+	{
+		.name			= "nas4220b:orange:hdd",
+		.default_trigger	= "none",
+		.gpio			= 60,
+	},
+	{
+		.name			= "nas4220b:green:os",
+		.default_trigger	= "heartbeat",
+		.gpio			= 62,
+	},
+};
+
+static struct gpio_led_platform_data ib4220b_leds_data = {
+	.num_leds	= ARRAY_SIZE(ib4220b_leds),
+	.leds		= ib4220b_leds,
+};
+
+static struct platform_device ib4220b_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &ib4220b_leds_data,
+	},
+};
+
+static struct gpio_keys_button ib4220b_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 61,
+		.active_low	= 1,
+		.desc		= "Backup Button",
+		.type		= EV_KEY,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 63,
+		.active_low	= 1,
+		.desc		= "Softreset Button",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data ib4220b_keys_data = {
+	.buttons	= ib4220b_keys,
+	.nbuttons	= ARRAY_SIZE(ib4220b_keys),
+};
+
+static struct platform_device ib4220b_key_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &ib4220b_keys_data,
+	},
+};
+
+static void __init ib4220b_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_16M, NULL, 0);
+	platform_device_register(&ib4220b_led_device);
+	platform_device_register(&ib4220b_key_device);
+}
+
+MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
+	.phys_io	= 0x7fffc000,
+	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &ib4220b_timer,
+	.init_machine	= ib4220b_init,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
new file mode 100644
index 0000000..36538c1
--- /dev/null
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -0,0 +1,143 @@
+/*
+ *  Support for Wiliboard WBD-111
+ *
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd111_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 5,
+		.active_low	= 1,
+		.desc		= "reset",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data wbd111_keys_data = {
+	.buttons	= wbd111_keys,
+	.nbuttons	= ARRAY_SIZE(wbd111_keys),
+};
+
+static struct platform_device wbd111_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd111_keys_data,
+	},
+};
+
+static struct gpio_led wbd111_leds[] = {
+	{
+		.name			= "L3red",
+		.gpio			= 1,
+	},
+	{
+		.name			= "L4green",
+		.gpio			= 2,
+	},
+	{
+		.name			= "L4red",
+		.gpio			= 3,
+	},
+	{
+		.name			= "L3green",
+		.gpio			= 5,
+	},
+};
+
+static struct gpio_led_platform_data wbd111_leds_data = {
+	.num_leds	= ARRAY_SIZE(wbd111_leds),
+	.leds		= wbd111_leds,
+};
+
+static struct platform_device wbd111_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd111_leds_data,
+	},
+};
+
+static struct sys_timer wbd111_timer = {
+	.init	= gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd111_partitions[] = {
+	{
+		.name		= "RedBoot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x100000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x120000,
+		.size		= 0x6a0000,
+	} , {
+		.name		= "VCTL",
+		.offset		= 0x7c0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "cfg",
+		.offset		= 0x7d0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "FIS",
+		.offset		= 0x7e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#define wbd111_num_partitions	ARRAY_SIZE(wbd111_partitions)
+#else
+#define wbd111_partitions	NULL
+#define wbd111_num_partitions	0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd111_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_8M, wbd111_partitions,
+				 wbd111_num_partitions);
+	platform_device_register(&wbd111_leds_device);
+	platform_device_register(&wbd111_keys_device);
+}
+
+MACHINE_START(WBD111, "Wiliboard WBD-111")
+	.phys_io	= 0x7fffc000,
+	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &wbd111_timer,
+	.init_machine	= wbd111_init,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
new file mode 100644
index 0000000..ece8b4c
--- /dev/null
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -0,0 +1,143 @@
+/*
+ *  Support for Wiliboard WBD-222
+ *
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd222_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 5,
+		.active_low	= 1,
+		.desc		= "reset",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data wbd222_keys_data = {
+	.buttons	= wbd222_keys,
+	.nbuttons	= ARRAY_SIZE(wbd222_keys),
+};
+
+static struct platform_device wbd222_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd222_keys_data,
+	},
+};
+
+static struct gpio_led wbd222_leds[] = {
+	{
+		.name			= "L3red",
+		.gpio			= 1,
+	},
+	{
+		.name			= "L4green",
+		.gpio			= 2,
+	},
+	{
+		.name			= "L4red",
+		.gpio			= 3,
+	},
+	{
+		.name			= "L3green",
+		.gpio			= 5,
+	},
+};
+
+static struct gpio_led_platform_data wbd222_leds_data = {
+	.num_leds	= ARRAY_SIZE(wbd222_leds),
+	.leds		= wbd222_leds,
+};
+
+static struct platform_device wbd222_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd222_leds_data,
+	},
+};
+
+static struct sys_timer wbd222_timer = {
+	.init	= gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd222_partitions[] = {
+	{
+		.name		= "RedBoot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x100000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x120000,
+		.size		= 0x6a0000,
+	} , {
+		.name		= "VCTL",
+		.offset		= 0x7c0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "cfg",
+		.offset		= 0x7d0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "FIS",
+		.offset		= 0x7e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#define wbd222_num_partitions	ARRAY_SIZE(wbd222_partitions)
+#else
+#define wbd222_partitions	NULL
+#define wbd222_num_partitions	0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd222_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_8M, wbd222_partitions,
+		wbd222_num_partitions);
+	platform_device_register(&wbd222_leds_device);
+	platform_device_register(&wbd222_keys_device);
+}
+
+MACHINE_START(WBD222, "Wiliboard WBD-222")
+	.phys_io	= 0x7fffc000,
+	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &wbd222_timer,
+	.init_machine	= wbd222_init,
+MACHINE_END
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
index 6c19156..c55a52c 100644
--- a/arch/arm/mach-h720x/include/mach/hardware.h
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -182,8 +182,6 @@
 #define SERIAL_ENABLE_EN	(1<<0)
 
 /* General defines to pacify gcc */
-#define PCIO_BASE 		(0)	/* for inb, outb and friends */
-#define PCIO_VIRT		PCIO_BASE
 
 #define __ASM_ARCH_HARDWARE_INCMACH_H
 #include "boards.h"
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 8e26360..57f51ba 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -32,7 +32,6 @@
 #define IO_SIZE			0x0B000000                 // How much?
 #define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
 
-#define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
 #define pcibios_assign_all_busses()	1
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
index c319200..57b508b 100644
--- a/arch/arm/mach-ixp23xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -15,7 +15,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 /* PCI IO info */
-#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
 #define PCIBIOS_MIN_IO		0x00000000
 #define PCIBIOS_MIN_MEM		0xe0000000
 
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 244655d..0629394 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -150,9 +150,8 @@ static void __init common_init(void)
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
@@ -160,9 +159,8 @@ MACHINE_END
 
 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 8c3fa5d1..69bcba1 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -42,9 +42,8 @@ static void __init avengers_lite_init(void)
 
 MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = avengers_lite_init,
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index e1e66c1..3b29fa7 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -31,7 +31,7 @@ static struct map_desc standard_io_desc[] __initdata = {
 	},
 };
 
-void __init pxa_map_io(void)
+void __init mmp_map_io(void)
 {
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 }
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index b4a0ba0..ec8d65d 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,15 +3,6 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
-extern void mmp2_clear_pmic_int(void);
-
-extern struct sys_timer pxa168_timer;
-extern struct sys_timer pxa910_timer;
-extern struct sys_timer mmp2_timer;
-extern void __init pxa168_init_irq(void);
-extern void __init pxa910_init_irq(void);
-extern void __init mmp2_init_icu(void);
-extern void __init mmp2_init_irq(void);
 
 extern void __init icu_init_irq(void);
-extern void __init pxa_map_io(void);
+extern void __init mmp_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 4ec7709..e4312d2 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -114,9 +114,8 @@ static void __init flint_init(void)
 
 MACHINE_START(FLINT, "Flint Development Platform")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = flint_init,
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 1fa0a49..d0ec7da 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -1,3 +1,6 @@
+#ifndef __MACH_DEVICE_H
+#define __MACH_DEVICE_H
+
 #include <linux/types.h>
 
 #define MAX_RESOURCE_DMA	2
@@ -47,3 +50,4 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 }
 
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+#endif /* __MACH_DEVICE_H */
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index fec220b..dbba6e8 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -1,6 +1,13 @@
 #ifndef __ASM_MACH_MMP2_H
 #define __ASM_MACH_MMP2_H
 
+struct sys_timer;
+
+extern struct sys_timer mmp2_timer;
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
+extern void mmp2_clear_pmic_int(void);
+
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 3b2bd5d..27e1bc7 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,6 +1,11 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
+struct sys_timer;
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 4f0b4ec..f13c49d 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,6 +1,11 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
+struct sys_timer;
+
+extern struct sys_timer pxa910_timer;
+extern void __init pxa910_init_irq(void);
+
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
index cb18221..01342be 100644
--- a/arch/arm/mach-mmp/irq-mmp2.c
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <mach/regs-icu.h>
+#include <mach/mmp2.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index d77dd41..80c3e7a 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -135,9 +135,8 @@ static void __init jasper_init(void)
 
 MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = jasper_init,
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 7f5eb05..daf3993 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -17,6 +17,7 @@
 
 #include <asm/hardware/cache-tauros2.h>
 
+#include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
@@ -26,6 +27,7 @@
 #include <mach/mfp.h>
 #include <mach/gpio.h>
 #include <mach/devices.h>
+#include <mach/mmp2.h>
 
 #include "common.h"
 #include "clock.h"
@@ -158,6 +160,26 @@ static int __init mmp2_init(void)
 }
 postcore_initcall(mmp2_init);
 
+static void __init mmp2_timer_init(void)
+{
+	unsigned long clk_rst;
+
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+	/*
+	 * enable bus/functional clock, enable 6.5MHz (divider 4),
+	 * release reset
+	 */
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+	timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+	.init	= mmp2_timer_init,
+};
+
 /* on-chip devices */
 MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
 MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 0e0c922..e81db74 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -100,9 +100,8 @@ static void __init tavorevb_init(void)
 
 MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = tavorevb_init,
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index cf75694..6652819 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -200,24 +200,3 @@ void __init timer_init(int irq)
 	clocksource_register(&cksrc);
 	clockevents_register_device(&ckevt);
 }
-
-static void __init mmp2_timer_init(void)
-{
-	unsigned long clk_rst;
-
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
-
-	/*
-	 * enable bus/functional clock, enable 6.5MHz (divider 4),
-	 * release reset
-	 */
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
-
-	timer_init(IRQ_MMP2_TIMER1);
-}
-
-struct sys_timer mmp2_timer = {
-	.init	= mmp2_timer_init,
-};
-
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index b22dec4..ee65e05 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -123,9 +123,8 @@ static void __init ttc_dkb_init(void)
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
 	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = ttc_dkb_init,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3b51741..7aefb90 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -238,6 +238,17 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
+config MACH_COLIBRI_PXA270_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
+	depends on MACH_COLIBRI
+
+config MACH_COLIBRI_PXA270_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	depends on MACH_COLIBRI
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
@@ -336,6 +347,9 @@ config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
 
+config MACH_PALM27X
+	bool
+
 config MACH_PALMTE2
 	bool "Palm Tungsten|E2"
 	default y
@@ -360,6 +374,7 @@ config MACH_PALMT5
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 	  handheld computer.
@@ -370,6 +385,7 @@ config MACH_PALMTX
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
@@ -380,6 +396,7 @@ config MACH_PALMZ72
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
@@ -390,6 +407,7 @@ config MACH_PALMLD
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm LifeDrive
 	  handheld computer.
@@ -447,16 +465,13 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-	select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
-	bool
-	depends on !CORGI_SSP_DEPRECATED
-	select HWMON
-	select SENSORS_MAX1111
+config PXA_SHARPSL_DETECT_MACH_ID
+	bool "Detect machine ID at run-time in the decompressor"
+	depends on PXA_SHARPSL
+	help
+	  Say Y here if you want the zImage decompressor to detect
+	  the Zaurus machine ID at run-time. For latest kexec-based
+	  boot loader, this is not necessary.
 
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
@@ -510,6 +525,25 @@ config MACH_TOSA
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
 config MACH_ICONTROL
 	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 	select CPU_PXA320
@@ -648,25 +682,15 @@ config PXA_SHARP_Cxx00
 	help
 	  Enable common support for Sharp Cxx00 models
 
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	default n
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
 
+config SHARPSL_PM_MAX1111
+	bool
+	select HWMON
+	select SENSORS_MAX1111
 
 config PXA_HAVE_BOARD_IRQS
 	bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index b8f1f4b..85c7fb3 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -51,14 +51,16 @@ obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
@@ -73,6 +75,7 @@ obj-$(CONFIG_PXA_EZX)           += ezx.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
 obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
@@ -84,12 +87,6 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_E330)		+= e330.o
-obj-$(CONFIG_MACH_E350)		+= e350.o
-obj-$(CONFIG_MACH_E740)		+= e740.o
-obj-$(CONFIG_MACH_E750)		+= e750.o
-obj-$(CONFIG_MACH_E400)		+= e400.o
-obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace..9041340 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -22,9 +22,14 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/ioport.h>
+#include <linux/ucb1400.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -51,6 +56,59 @@
 #include "generic.h"
 #include "devices.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Reset, configured as GPIO wakeup source */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* LEDs */
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* USB Host */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
 static unsigned long balloon3_irq_enabled;
 
 static unsigned long balloon3_features_present =
@@ -73,6 +131,321 @@ int __init parse_balloon3_features(char *arg)
 }
 early_param("balloon3_features", parse_balloon3_features);
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= balloon3_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
+	}
+};
+
+static struct resource balloon3_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &balloon3_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = balloon3_flash_data,
+	},
+};
+static void __init balloon3_nor_init(void)
+{
+	platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init balloon3_ts_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+		return;
+
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+	int ret;
+
+	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+		return;
+
+	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+	set_pxa_fb_info(&balloon3_lcd_screen);
+	return;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+	return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+	pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+	.udc_command		= balloon3_udc_command,
+	.udc_is_connected	= balloon3_udc_is_connected,
+	.gpio_pullup		= -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+	pxa_set_udc_info(&balloon3_udc_info);
+	platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data balloon3_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+		return;
+	pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+	.name	= "leds-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_led_info,
+	}
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:led0",
+		.gpio			= BALLOON3_PCF_GPIO_LED0,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:led1",
+		.gpio			= BALLOON3_PCF_GPIO_LED1,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led2",
+		.gpio			= BALLOON3_PCF_GPIO_LED2,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led3",
+		.gpio			= BALLOON3_PCF_GPIO_LED3,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led4",
+		.gpio			= BALLOON3_PCF_GPIO_LED4,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led5",
+		.gpio			= BALLOON3_PCF_GPIO_LED5,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led6",
+		.gpio			= BALLOON3_PCF_GPIO_LED6,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led7",
+		.gpio			= BALLOON3_PCF_GPIO_LED7,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+	.leds		= balloon3_pcf_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+	.name	= "leds-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &balloon3_pcf_gpio_led_info,
+	}
+};
+
+static void __init balloon3_leds_init(void)
+{
+	platform_device_register(&balloon3_leds);
+	platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
 static void balloon3_mask_irq(unsigned int irq)
 {
 	int balloon3_irq = (irq - BALLOON3_IRQ(0));
@@ -98,7 +471,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
 					balloon3_irq_enabled;
-
 	do {
 		/* clear useless edge notification */
 		if (desc->chip->ack)
@@ -132,201 +504,259 @@ static void __init balloon3_init_irq(void)
 		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
-static unsigned long balloon3_ac97_pin_config[] = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static unsigned long balloon3_lcd_pin_config[] = {
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO99_GPIO,		/* Backlight */
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
+	.n_latch	= 0,
+	.setup		= NULL,
+	.teardown	= NULL,
+	.context	= NULL,
 };
 
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
 	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &balloon3_pcf857x_pdata,
 	},
 };
 
-static struct pxafb_mach_info balloon3_pxafb_info = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= balloon3_backlight_power,
-};
+static void __init balloon3_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static uint16_t balloon3_ctl =
+	BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+	BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+	BALLOON3_NAND_CONTROL_FLWP;
+
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
 
-static unsigned long balloon3_mmc_pin_config[] = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_CLE)
+			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+		else
+			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
 
-static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __func__);
-		/* FIXME something to prod here? */
-	} else {
-		pr_debug("%s: off\n", __func__);
-		/* FIXME something to prod here? */
+		if (ctrl & NAND_ALE)
+			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+		else
+			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+
+		__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
 	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
 }
 
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower 	= balloon3_mci_setpower,
-};
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip < 0 || chip > 3)
+		return;
 
-static int balloon3_udc_is_connected(void)
+	balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
+			BALLOON3_NAND_CONTROL_FLCE1 |
+			BALLOON3_NAND_CONTROL_FLCE2 |
+			BALLOON3_NAND_CONTROL_FLCE3;
+
+	/* Deassert correct nCE line */
+	balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+
+	__raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
 {
-	pr_debug("%s: udc connected\n", __func__);
-	return 1;
+	void __iomem *temp_map;
+	uint16_t ver;
+	int ret;
+
+	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+
+	ver = __raw_readw(BALLOON3_FPGA_VER);
+	if (ver > 0x0201)
+		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+			"NAND support might be broken in this version!", ver);
+
+	/* Power up the NAND chips */
+	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+	if (ret)
+		goto err1;
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+	if (ret)
+		goto err2;
+
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+	/* Deassert all nCE lines and write protect line */
+	__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+	return 0;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+	return ret;
 }
 
-static void balloon3_udc_command(int cmd)
+static void balloon3_nand_remove(struct platform_device *pdev)
 {
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
-		pr_debug("%s: connect\n", __func__);
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~UP2OCR_DPPUE;
-		pr_debug("%s: disconnect\n", __func__);
-		break;
-	}
+	/* Power down the NAND chips */
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
 }
 
-static struct pxa2xx_udc_mach_info balloon3_udc_info = {
-	.udc_is_connected = balloon3_udc_is_connected,
-	.udc_command      = balloon3_udc_command,
+static struct mtd_partition balloon3_partition_info[] = {
+	[0] = {
+		.name	= "Boot",
+		.offset	= 0,
+		.size	= SZ_4M,
+	},
+	[1] = {
+		.name	= "RootFS",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
 };
 
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-};
+static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
 
-static unsigned long balloon3_ohci_pin_config[] = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
+struct platform_nand_data balloon3_nand_pdata = {
+	.chip = {
+		.nr_chips	= 4,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
+		.partitions	= balloon3_partition_info,
+		.chip_delay	= 50,
+		.part_probe_types = balloon3_part_probes,
+	},
+	.ctrl = {
+		.hwcontrol	= 0,
+		.dev_ready	= 0,
+		.select_chip	= balloon3_nand_select_chip,
+		.cmd_ctrl	= balloon3_nand_cmd_ctl,
+		.probe		= balloon3_nand_probe,
+		.remove		= balloon3_nand_remove,
+	},
 };
 
-static struct pxaohci_platform_data balloon3_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+static struct resource balloon3_nand_resource[] = {
+	[0] = {
+		.start = BALLOON3_NAND_BASE,
+		.end   = BALLOON3_NAND_BASE + 0x4,
+		.flags = IORESOURCE_MEM,
+	},
 };
 
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Wakeup GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* NAND & IDLE LED GPIOs */
-	GPIO9_GPIO,
-	GPIO10_GPIO,
+static struct platform_device balloon3_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
+	.resource	= balloon3_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &balloon3_nand_pdata,
+	}
 };
 
-static struct gpio_led balloon3_gpio_leds[] = {
+static void __init balloon3_nand_init(void)
+{
+	platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
 	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
 	},
+	.consumer_supplies	= balloon3_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
 	{
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &balloon3_max1587a_v3_info,
+	}
 };
 
-static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+static struct max1586_platform_data balloon3_max1587a_info = {
+	.subdevs     = balloon3_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
 };
 
-static struct platform_device balloon3led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_leds_platform_data,
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &balloon3_max1587a_info,
 	},
 };
 
-static void __init balloon3_init(void)
+static void __init balloon3_pmic_init(void)
 {
-	pr_info("Initialising Balloon3\n");
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
 
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-		pxa_set_ac97_info(NULL);
-	}
-
-	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
-			"LCD Backlight Power");
-		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-		set_pxa_fb_info(&balloon3_pxafb_info);
-	}
-
-	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-		pxa_set_mci_info(&balloon3_mci_platform_data);
-	}
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
-		pxa_set_ohci_info(&balloon3_ohci_platform_data);
-	}
-	pxa_set_udc_info(&balloon3_udc_info);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	platform_device_register(&balloon3led_device);
+	balloon3_i2c_init();
+	balloon3_irda_init();
+	balloon3_lcd_init();
+	balloon3_leds_init();
+	balloon3_mmc_init();
+	balloon3_nand_init();
+	balloon3_nor_init();
+	balloon3_pmic_init();
+	balloon3_ts_init();
+	balloon3_udc_init();
+	balloon3_uhc_init();
 }
 
 static struct map_desc balloon3_io_desc[] __initdata = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index fdda6be..c70e6c2 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -689,6 +689,7 @@ static void __init cm_x300_init_da9030(void)
 {
 	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
 	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+	set_irq_wake(IRQ_WAKEUP0, 1);
 }
 
 static void __init cm_x300_init_wi2wi(void)
@@ -745,9 +746,10 @@ static void __init cm_x300_init(void)
 {
 	cm_x300_init_mfp();
 
-	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	if (cpu_is_pxa300())
+		pxa_set_ffuart_info(NULL);
 
 	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
new file mode 100644
index 0000000..0f3b632
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	colibri_pxa270_mmc_init();
+	colibri_pxa270_uhc_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
new file mode 100644
index 0000000..37f0f3e
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -0,0 +1,272 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ  (114)
+#define GPIO0_INCOME_SD_DETECT  (0)
+#define GPIO0_INCOME_SD_RO      (1)
+#define GPIO54_INCOME_LED_A     (54)
+#define GPIO55_INCOME_LED_B     (55)
+#define GPIO113_INCOME_TS_IRQ   (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.pwm_period_ns	= 1000000,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 061c453..98673ac 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -3,6 +3,7 @@
  *
  *  Support for Toradex PXA270 based Colibri module
  *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -10,49 +11,55 @@
  */
 
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
 
-#include <mach/pxa27x.h>
+#include <mach/audio.h>
 #include <mach/colibri.h>
+#include <mach/pxa27x.h>
 
-#include "generic.h"
 #include "devices.h"
+#include "generic.h"
 
-/*
- * GPIO configuration
- */
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+	/* Ethernet */
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
 };
 
-/*
- * NOR flash
- */
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition colibri_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
 	}, {
 		.name =		"Kernel",
 		.offset =	0x00040000,
@@ -90,50 +97,113 @@ static struct platform_device colibri_pxa270_flash_device = {
 	.num_resources = 1,
 };
 
-/*
- * DM9000 Ethernet
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 3,
+static void __init colibri_pxa270_nor_init(void)
+{
+	platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+	{
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS + 4,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+	{
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
-		.start	= COLIBRI_PXA270_ETH_IRQ,
-		.end	= COLIBRI_PXA270_ETH_IRQ,
+	{
+		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
-static struct platform_device dm9000_device = {
+static struct platform_device colibri_pxa270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
+	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+	.resource	= colibri_pxa270_dm9000_resources,
 };
-#endif /* CONFIG_DM9000 */
 
-static struct platform_device *colibri_pxa270_devices[] __initdata = {
-	&colibri_pxa270_flash_device,
-#if defined(CONFIG_DM9000)
-	&dm9000_device,
+static void __init colibri_pxa270_eth_init(void)
+{
+	platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
 #endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &colibri_pxa270_ucb1400_pdata,
+	},
 };
 
+static void __init colibri_pxa270_tsc_init(void)
+{
+	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+	platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+
+	colibri_pxa270_nor_init();
+	colibri_pxa270_eth_init();
+	colibri_pxa270_tsc_init();
+
+	switch (colibri_pxa270_baseboard) {
+	case COLIBRI_PXA270_EVALBOARD:
+		colibri_pxa270_evalboard_init();
+		break;
+	case COLIBRI_PXA270_INCOME:
+		colibri_pxa270_income_boardinit();
+		break;
+	default:
+		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+				colibri_pxa270_baseboard);
+	}
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+	colibri_pxa270_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
@@ -146,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= colibri_pxa270_income_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ae835fa..99e850d 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
@@ -28,6 +29,8 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/audio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -101,6 +104,42 @@ void __init colibri_pxa320_init_ohci(void)
 static inline void colibri_pxa320_init_ohci(void) {}
 #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
+	.gpio_pullup		= -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &colibri_pxa320_gpio_vbus_info,
+	},
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+	.udc_command		= colibri_pxa320_udc_command,
+	.gpio_pullup		= -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+	pxa_set_udc_info(&colibri_pxa320_udc_info);
+	platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
 static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
 	GPIO22_MMC1_CLK,
 	GPIO23_MMC1_CMD,
@@ -212,6 +251,7 @@ void __init colibri_pxa320_init(void)
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
 	colibri_pxa320_init_uart();
+	colibri_pxa320_init_udc();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 461ba40..3fb0fc0 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -50,14 +50,13 @@
 #include <mach/udc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
-#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
 static unsigned long corgi_pin_config[] __initdata = {
 	/* Static Memory I/O */
@@ -185,8 +184,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.num_devs     = 1,
 };
 
-EXPORT_SYMBOL(corgiscoop_device);
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 3f1dc74..2903477 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -23,12 +23,11 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/sharpsl.h>
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl_pm.h>
 
 #include "generic.h"
-#include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
 #define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
@@ -134,11 +133,11 @@ unsigned long corgipm_read_devdata(int type)
 	case SHARPSL_STATUS_ACIN:
 		return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
 	case SHARPSL_STATUS_FATAL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
 	case SHARPSL_ACIN_VOLT:
 		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
 	case SHARPSL_BATT_TEMP:
@@ -165,8 +164,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.should_wakeup   = corgi_should_wakeup,
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
-	.backlight_limit = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 8e10db1..65447dc 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
+#include <asm/pmu.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
@@ -31,6 +32,19 @@ void __init pxa_register_device(struct platform_device *dev, void *data)
 		dev_err(&dev->dev, "unable to register device: %d\n", ret);
 }
 
+static struct resource pxa_resource_pmu = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pxa_resource_pmu,
+	.num_resources	= 1,
+};
+
 static struct resource pxamci_resources[] = {
 	[0] = {
 		.start	= 0x41100000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 93817d9..50353ea 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,3 +1,4 @@
+extern struct platform_device pxa_device_pmu;
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
deleted file mode 100644
index 8fde338..0000000
--- a/arch/arm/mach-pxa/e330.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e330 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e330_tc6387xb_device,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
deleted file mode 100644
index f50f055..0000000
--- a/arch/arm/mach-pxa/e350.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e350 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e350_t7l66xb_device,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
deleted file mode 100644
index 55b950f..0000000
--- a/arch/arm/mach-pxa/e400.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
deleted file mode 100644
index d578021..0000000
--- a/arch/arm/mach-pxa/e740.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
deleted file mode 100644
index af83caa..0000000
--- a/arch/arm/mach-pxa/e750.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
deleted file mode 100644
index 8ea97bf..0000000
--- a/arch/arm/mach-pxa/e800.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index a0ab308..349212a 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -15,6 +15,13 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -22,9 +29,12 @@
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
 
+#include "devices.h"
 #include "generic.h"
 #include "clock.h"
 
@@ -130,3 +140,802 @@ void eseries_register_clks(void)
 	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 }
 
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+	&e330_tc6387xb_device,
+};
+
+static void __init e330_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+	&e350_t7l66xb_device,
+};
+
+static void __init e350_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+	&e400_t7l66xb_device,
+};
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+	&e740_fb_device,
+	&e740_t7l66xb_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO11_3_6MHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+	&e750_fb_device,
+	&e750_tc6393xb_device,
+};
+
+static void __init e750_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+	&e800_fb_device,
+	&e800_tc6393xb_device,
+};
+
+static void __init e800_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+	pxa_set_udc_info(&e800_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
deleted file mode 100644
index 5161dca..0000000
--- a/arch/arm/mach-pxa/imote2.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/imote2.c
- *
- * Author:	Ed C. Epp
- * Created:	Nov 05, 2002
- * Copyright:	Intel Corp.
- *
- * Modified 2008:  Jonathan Cameron
- *
- * The Imote2 is a wireless sensor node platform sold
- * by Crossbow (www.xbow.com).
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <plat/i2c.h>
-#include <mach/udc.h>
-#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x-udc.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 - to daughter boards */
-	GPIO37_GPIO,			/* Chip Select */
-	GPIO36_SSP2_SCLK,
-	GPIO38_SSP2_TXD,
-	GPIO11_SSP2_RXD,
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART Serial console via debug board*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
-	.gpio_data =  100,
-	.gpio_sck  =  98,
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-	.dev = {
-		.platform_data = &platform_data_sht15,
-	},
-};
-
-static struct regulator_consumer_supply imote2_sensor_3_con[] = {
-	{
-		.dev = &sht15.dev,
-		.supply = "vcc",
-	},
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-/* Reverse engineered partly from Platformx drivers */
-enum imote2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	vcc_mica,
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-
-	vcc_sram_ext, /* directly connected to the pxa271 */
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio,
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow
- * but as of yet they haven't been forthcoming.
- *
- * Some of these are clearly Stargate 2 related (no way of plugging
- * in an lcd on the IM2 for example!).
- */
-static struct regulator_init_data imote2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
-		.consumer_supplies = imote2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &imote2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &imote2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &imote2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &imote2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &imote2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &imote2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &imote2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &imote2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &imote2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO18,
-		.platform_data = &imote2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power = -1,
-};
-
-static struct mtd_partition imote2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0,
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0,
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data imote2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = imote2flash_partitions,
-	.nr_parts = ARRAY_SIZE(imote2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device imote2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &imote2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-/* Some of the drivers here are out of kernel at the moment (parts of IIO)
- * and it may be a while before they are in the mainline.
- */
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = IRQ_GPIO(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = IRQ_GPIO(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = IRQ_GPIO(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = gpio_to_irq(1),
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{ /* Driver in IIO */
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
-	}, { /* Driver out of kernel as it needs considerable rewriting */
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void im2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= im2_udc_command,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&imote2_flash_device,
-	&imote2_leds,
-	&sht15,
-};
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= imote2_init,
-	.boot_params	= 0xA0000100,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 1a74106..eec92e6 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,21 +26,55 @@ enum balloon3_features {
 #define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
 #define BALLOON3_FPGA_LENGTH	0x01000000
 
-/* FPGA/CPLD registers */
-#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* fixme - same for now */
-#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* FPGA / CPLD registers for CF socket */
+#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
+#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
+
 /* fpga/cpld interrupt control register */
 #define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
 #define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
 
 #define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
 #define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
 #define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
 
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ		(1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET		(1 << 0)
+#define BALLOON3_CF_ENABLE		(1 << 1)
+#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
+#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
+#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
+#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
+#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
+#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
+#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
+#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
+
+/* NAND Status register */
+#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
+
+/* NAND Control2 register */
+#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
+
 /* GPIOs for irqs */
 #define BALLOON3_GPIO_AUX_NIRQ		(94)
 #define BALLOON3_GPIO_CODEC_IRQ		(95)
@@ -54,20 +88,24 @@ enum balloon3_features {
 
 #define BALLOON3_GPIO_S0_CD		(105)
 
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND		(102)
+
+/* PCF8574A Leds */
+#define	BALLOON3_PCF_GPIO_BASE		160
+#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
+#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
+#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
+#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
+#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
+#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
+#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
+#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
+
 /* FPGA Interrupt Mask/Acknowledge Register */
 #define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
 #define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
 
-/* CF Status Register */
-#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
-#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
-					/* VDD sense / card status changed */
-
-/* CF control register (write) */
-#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
-#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
-#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
-
 /* CPLD (and FPGA) interface definitions */
 #define CPLD_LCD0_DATA_SET             0x00
 #define CPLD_LCD0_DATA_CLR             0x10
@@ -132,9 +170,6 @@ enum balloon3_features {
 /* Balloon3 Interrupts */
 #define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
 
-#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
-
 #define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 5f2ba8d..58dada1 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -5,6 +5,27 @@
 #include <mach/mfp.h>
 
 /*
+ * base board glue for PXA270 module
+ */
+
+enum {
+	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
  * common settings for all modules
  */
 
@@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO	114
-#define COLIBRI_PXA270_ETH_IRQ		\
-	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
 #endif /* _COLIBRI_H_ */
 
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 585970e..0011055 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -109,10 +109,5 @@
 #define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
 #define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
 
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 06abd41..9b89868 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -14,25 +14,15 @@
 
 /*
 GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+interrupt signal for determining cable presence. On the gumstix F,
 this moves to GPIO17 and GPIO37. */
 
 /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
 has detected a cable insertion; driven low otherwise. */
 
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn		81
-#define GPIO_GUMSTIX_USB_GPIOx		83
-
-#else
-
 #define GPIO_GUMSTIX_USB_GPIOn		35
 #define GPIO_GUMSTIX_USB_GPIOx		41
 
-#endif
-
 /* usb state change */
 #define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 3d8d8cb..7f64d24 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -14,11 +14,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 /*
- * We requires absolute addresses.
- */
-#define PCIO_BASE		0
-
-/*
  * Workarounds for at least 2 errata so far require this.
  * The mapping is set in mach-pxa/generic.c.
  */
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
new file mode 100644
index 0000000..0a5e5ea
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -0,0 +1,81 @@
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef	__INCLUDE_MACH_PALM27X__
+#define	__INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+					struct pxafb_mode_info *mode);
+#else
+static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#endif
+
+#if	defined(CONFIG_USB_GADGET_PXA27X) || \
+	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+					int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+					int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h
new file mode 100644
index 0000000..6cf7df1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h
@@ -0,0 +1,33 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef	__MACH_PATA_PXA_H__
+#define	__MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+	/* PXA DMA DREQ<0:2> pin */
+	uint32_t	dma_dreq;
+	/* Register shift */
+	uint32_t	reg_shift;
+	/* IRQ flags */
+	uint32_t	irq_flags;
+};
+
+#endif	/* __MACH_PATA_PXA_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
deleted file mode 100644
index 8242e14..0000000
--- a/arch/arm/mach-pxa/include/mach/sharpsl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
-	unsigned long (*get_hsync_invperiod)(void);
-	void (*put_hsync)(void);
-	void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-extern void corgi_lcd_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 1920dc6b..905be67 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -93,6 +93,8 @@ struct sharpsl_pm_status {
 
 extern struct sharpsl_pm_status sharpsl_pm;
 
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 
 #define SHARPSL_LED_ERROR  2
 #define SHARPSL_LED_ON     1
@@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm;
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
 
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT   4u
+#define MAX1111_BATT_TEMP   2u
+#define MAX1111_ACIN_VOLT   6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index fa1998c..685749a 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -185,7 +185,5 @@
 /*
  * Shared data structures
  */
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
 extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index fa6a708..dc66942 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -34,7 +34,7 @@
 #include <linux/irq.h>
 #include <linux/pda_power.h>
 #include <linux/power_supply.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
@@ -636,7 +636,7 @@ static struct platform_device power_dev = {
 	},
 };
 
-static struct wm97xx_batt_info mioa701_battery_data = {
+static struct wm97xx_batt_pdata mioa701_battery_data = {
 	.batt_aux	= WM97XX_AUX_ID1,
 	.temp_aux	= -1,
 	.charge_gpio	= -1,
@@ -648,6 +648,10 @@ static struct wm97xx_batt_info mioa701_battery_data = {
 	.batt_name	= "mioa701_battery",
 };
 
+static struct wm97xx_pdata mioa701_wm97xx_pdata = {
+	.batt_pdata	= &mioa701_battery_data,
+};
+
 /*
  * Voltage regulation
  */
@@ -716,6 +720,7 @@ struct i2c_pxa_platform_data i2c_pdata = {
 
 static pxa2xx_audio_ops_t mioa701_ac97_info = {
 	.reset_gpio = 95,
+	.codec_pdata = { &mioa701_wm97xx_pdata, },
 };
 
 /*
@@ -794,7 +799,6 @@ static void __init mioa701_machine_init(void)
 	set_pxa_fb_info(&mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
-	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
new file mode 100644
index 0000000..77ad6d3
--- /dev/null
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -0,0 +1,477 @@
+/*
+ * Common code for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palm27x_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.detect_delay_ms	= 200,
+};
+
+void __init palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted)
+{
+	palm27x_mci_platform_data.gpio_card_detect	= detect;
+	palm27x_mci_platform_data.gpio_card_ro		= ro;
+	palm27x_mci_platform_data.gpio_power		= power;
+	palm27x_mci_platform_data.gpio_power_invert	= power_inverted;
+
+	pxa_set_mci_info(&palm27x_mci_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#if defined(CONFIG_SUSPEND)
+void __init palm27x_pm_init(unsigned long str_base)
+{
+	static const unsigned long resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/*
+	 * Copy the bootloader.
+	 * NOTE: PalmZ72 uses a different wakeup method!
+	 */
+	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
+}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+struct pxafb_mode_info palm_320x480_lcd_mode = {
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+};
+
+struct pxafb_mode_info palm_320x320_lcd_mode = {
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+};
+
+struct pxafb_mode_info palm_320x320_new_lcd_mode = {
+	.pixclock	= 86538,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 20,
+	.right_margin	= 8,
+	.upper_margin	= 8,
+	.lower_margin	= 5,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+};
+
+static struct pxafb_mach_info palm27x_lcd_screen = {
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int palm27x_lcd_power;
+static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(palm27x_lcd_power, on);
+}
+
+void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
+{
+	palm27x_lcd_screen.modes = mode;
+
+	if (gpio_is_valid(power)) {
+		if (!gpio_request(power, "LCD power")) {
+			pr_err("Palm27x: failed to claim lcd power gpio!\n");
+			return;
+		}
+		if (!gpio_direction_output(power, 1)) {
+			pr_err("Palm27x: lcd power configuration failed!\n");
+			return;
+		}
+		palm27x_lcd_power = power;
+		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
+	}
+
+	set_pxa_fb_info(&palm27x_lcd_screen);
+}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if	defined(CONFIG_USB_GADGET_PXA27X) || \
+	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info palm27x_udc_info = {
+	.gpio_vbus_inverted	= 1,
+};
+
+static struct platform_device palm27x_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palm27x_udc_info,
+	},
+};
+
+void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
+{
+	palm27x_udc_info.gpio_vbus	= vbus;
+	palm27x_udc_info.gpio_pullup	= pullup;
+
+	palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
+
+	if (!gpio_request(pullup, "USB Pullup")) {
+		gpio_direction_output(pullup,
+			palm27x_udc_info.gpio_vbus_inverted);
+		gpio_free(pullup);
+	} else
+		return;
+
+	platform_device_register(&palm27x_gpio_vbus);
+}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palm27x_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+void __init palm27x_irda_init(int pwdn)
+{
+	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
+	pxa_set_ficp_info(&palm27x_ficp_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+static struct wm97xx_batt_pdata palm27x_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+static struct wm97xx_pdata palm27x_wm97xx_pdata = {
+	.batt_pdata	= &palm27x_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
+	.codec_pdata	= { &palm27x_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= -1,
+};
+
+static struct platform_device palm27x_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palm27x_asoc_pdata,
+	},
+};
+
+void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
+{
+	palm27x_ac97_pdata.reset_gpio	= reset;
+	palm27x_asoc_pdata.jack_gpio	= jack;
+
+	if (minv < 0 || maxv < 0) {
+		palm27x_ac97_pdata.codec_pdata[0] = NULL;
+		pxa_set_ac97_info(&palm27x_ac97_pdata);
+	} else {
+		palm27x_batt_pdata.min_voltage	= minv,
+		palm27x_batt_pdata.max_voltage	= maxv,
+
+		pxa_set_ac97_info(&palm27x_ac97_pdata);
+		platform_device_register(&palm27x_asoc);
+	}
+}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static int palm_bl_power;
+static int palm_lcd_power;
+
+static int palm27x_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(palm_bl_power, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(palm_bl_power, 0);
+	if (ret)
+		goto err2;
+
+	if (gpio_is_valid(palm_lcd_power)) {
+		ret = gpio_request(palm_lcd_power, "LCD POWER");
+		if (ret)
+			goto err2;
+		ret = gpio_direction_output(palm_lcd_power, 0);
+		if (ret)
+			goto err3;
+	}
+
+	return 0;
+err3:
+	gpio_free(palm_lcd_power);
+err2:
+	gpio_free(palm_bl_power);
+err:
+	return ret;
+}
+
+static int palm27x_backlight_notify(struct device *dev, int brightness)
+{
+	gpio_set_value(palm_bl_power, brightness);
+	if (gpio_is_valid(palm_lcd_power))
+		gpio_set_value(palm_lcd_power, brightness);
+	return brightness;
+}
+
+static void palm27x_backlight_exit(struct device *dev)
+{
+	gpio_free(palm_bl_power);
+	if (gpio_is_valid(palm_lcd_power))
+		gpio_free(palm_lcd_power);
+}
+
+static struct platform_pwm_backlight_data palm27x_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0xfe,
+	.dft_brightness	= 0x7e,
+	.pwm_period_ns	= 3500,
+	.init		= palm27x_backlight_init,
+	.notify		= palm27x_backlight_notify,
+	.exit		= palm27x_backlight_exit,
+};
+
+static struct platform_device palm27x_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palm27x_backlight_data,
+	},
+};
+
+void __init palm27x_pwm_init(int bl, int lcd)
+{
+	palm_bl_power	= bl;
+	palm_lcd_power	= lcd;
+	platform_device_register(&palm27x_backlight);
+}
+#endif
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+static int palm_ac_state;
+static int palm_usb_state;
+
+static int palm27x_power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(palm_ac_state, "AC state");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(palm_ac_state);
+	if (ret)
+		goto err2;
+
+	if (gpio_is_valid(palm_usb_state)) {
+		ret = gpio_request(palm_usb_state, "USB state");
+		if (ret)
+			goto err2;
+		ret = gpio_direction_input(palm_usb_state);
+		if (ret)
+			goto err3;
+	}
+
+	return 0;
+err3:
+	gpio_free(palm_usb_state);
+err2:
+	gpio_free(palm_ac_state);
+err1:
+	return ret;
+}
+
+static void palm27x_power_supply_exit(struct device *dev)
+{
+	gpio_free(palm_usb_state);
+	gpio_free(palm_ac_state);
+}
+
+static int palm27x_is_ac_online(void)
+{
+	return gpio_get_value(palm_ac_state);
+}
+
+static int palm27x_is_usb_online(void)
+{
+	return !gpio_get_value(palm_usb_state);
+}
+static char *palm27x_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata palm27x_ps_info = {
+	.init			= palm27x_power_supply_init,
+	.exit			= palm27x_power_supply_exit,
+	.is_ac_online		= palm27x_is_ac_online,
+	.is_usb_online		= palm27x_is_usb_online,
+	.supplied_to		= palm27x_supplicants,
+	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
+};
+
+static struct platform_device palm27x_power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palm27x_ps_info,
+	},
+};
+
+void __init palm27x_power_init(int ac, int usb)
+{
+	palm_ac_state	= ac;
+	palm_usb_state	= usb;
+	platform_device_register(&palm27x_power_supply);
+}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data palm27x_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= palm27x_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
+};
+
+static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &palm27x_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data palm27x_max1587a_info = {
+	.subdevs     = palm27x_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &palm27x_max1587a_info,
+	},
+};
+
+void __init palm27x_pmic_init(void)
+{
+	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
+	pxa27x_set_i2c_power_info(NULL);
+}
+#endif
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1963819..91038ee 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -22,7 +22,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
 #include <linux/mtd/mtd.h>
@@ -41,6 +41,7 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -127,6 +128,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition palmld_partitions[] = {
 	{
 		.name		= "Flash",
@@ -160,20 +162,18 @@ static struct platform_device palmld_flash = {
 	},
 };
 
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
-	.detect_delay_ms	= 200,
-};
+static void __init palmld_nor_init(void)
+{
+	platform_device_register(&palmld_flash);
+}
+#else
+static inline void palmld_nor_init(void) {}
+#endif
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmld_matrix_keys[] = {
 	KEY(0, 1, KEY_F2),
 	KEY(0, 2, KEY_UP),
@@ -200,9 +200,18 @@ static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmld_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmld_keypad_platform_data);
+}
+#else
+static inline void palmld_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmld_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
@@ -222,77 +231,18 @@ static struct platform_device palmld_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmld_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMLD_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmld_backlight_notify(struct device *dev, int brightness)
+static void __init palmld_keys_init(void)
 {
-	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
-	return brightness;
+	platform_device_register(&palmld_pxa_keys);
 }
-
-static void palmld_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_BL_POWER);
-	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmld_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMLD_MAX_INTENSITY,
-	.dft_brightness	= PALMLD_MAX_INTENSITY,
-	.pwm_period_ns	= PALMLD_PERIOD_NS,
-	.init		= palmld_backlight_init,
-	.notify		= palmld_backlight_notify,
-	.exit		= palmld_backlight_exit,
-};
-
-static struct platform_device palmld_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmld_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmld_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * LEDs
  ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 struct gpio_led gpio_leds[] = {
 {
 	.name			= "palmld:green:led",
@@ -318,174 +268,34 @@ static struct platform_device palmld_leds = {
 	}
 };
 
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
-	if (ret)
-		goto err3;
-
-	return 0;
-
-err3:
-	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-err2:
-	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmld_is_ac_online(void)
+static void __init palmld_leds_init(void)
 {
-	return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+	platform_device_register(&palmld_leds);
 }
-
-static int palmld_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-}
-
-static char *palmld_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmld_is_ac_online,
-	.is_usb_online   = palmld_is_usb_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmld_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmld_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMLD_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMLD_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmld_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmld_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmld_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmld_asoc_pdata,
-	},
-};
+#else
+static inline void palmld_leds_init(void) {}
+#endif
 
 /******************************************************************************
  * HDD
  ******************************************************************************/
-static struct platform_device palmld_hdd = {
+#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct platform_device palmld_ide_device = {
 	.name	= "pata_palmld",
 	.id	= -1,
 };
 
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmld_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmld_lcd_screen = {
-	.modes		= palmld_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmld_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmld_pm_init(void)
+static void __init palmld_ide_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmld_ide_device);
 }
+#else
+static inline void palmld_ide_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmld_pxa_keys,
-#endif
-	&palmld_backlight,
-	&palmld_leds,
-	&power_supply,
-	&palmld_asoc,
-	&palmld_hdd,
-	&palmld_flash,
-};
-
 static struct map_desc palmld_io_desc[] __initdata = {
 {
 	.virtual	= PALMLD_IDE_VIRT,
@@ -510,20 +320,26 @@ static void __init palmld_map_io(void)
 static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmld_pm_init();
-	set_pxa_fb_info(&palmld_lcd_screen);
-	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(&palmld_ac97_pdata);
-	pxa_set_ficp_info(&palmld_ficp_platform_data);
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
+			GPIO_NR_PALMLD_SD_POWER, 0);
+	palm27x_pm_init(PALMLD_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
+	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
+			GPIO_NR_PALMLD_USB_DETECT_N);
+	palm27x_pmic_init();
+	palmld_kpc_init();
+	palmld_keys_init();
+	palmld_nor_init();
+	palmld_leds_init();
+	palmld_ide_init();
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5e92d84..1c28199 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -25,7 +25,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -42,6 +42,7 @@
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -104,19 +105,9 @@ static unsigned long palmt5_pin_config[] __initdata = {
 };
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
-	.detect_delay_ms	= 200,
-};
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmt5_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -142,9 +133,18 @@ static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmt5_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmt5_keypad_platform_data);
+}
+#else
+static inline void palmt5_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmt5_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 };
@@ -162,241 +162,17 @@ static struct platform_device palmt5_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmt5_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMT5_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmt5_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmt5_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_BL_POWER);
-	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmt5_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMT5_MAX_INTENSITY,
-	.dft_brightness	= PALMT5_MAX_INTENSITY,
-	.pwm_period_ns	= PALMT5_PERIOD_NS,
-	.init		= palmt5_backlight_init,
-	.notify		= palmt5_backlight_notify,
-	.exit		= palmt5_backlight_exit,
-};
-
-static struct platform_device palmt5_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmt5_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmt5_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-};
-
-static struct platform_device palmt5_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmt5_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-err2:
-	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmt5_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static char *palmt5_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmt5_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmt5_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmt5_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMT5_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMT5_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmt5_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmt5_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmt5_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmt5_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmt5_lcd_screen = {
-	.modes		= palmt5_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmt5_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmt5_pm_init(void)
+static void __init palmt5_keys_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmt5_pxa_keys);
 }
+#else
+static inline void palmt5_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmt5_pxa_keys,
-#endif
-	&palmt5_backlight,
-	&power_supply,
-	&palmt5_asoc,
-	&palmt5_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmt5_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
-	}
-}
-
 static void __init palmt5_reserve(void)
 {
 	memblock_reserve(0xa0200000, 0x1000);
@@ -405,21 +181,24 @@ static void __init palmt5_reserve(void)
 static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmt5_pm_init();
-	set_pxa_fb_info(&palmt5_lcd_screen);
-	pxa_set_mci_info(&palmt5_mci_platform_data);
-	palmt5_udc_init();
-	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_ficp_info(&palmt5_ficp_platform_data);
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
+			GPIO_NR_PALMT5_SD_POWER, 0);
+	palm27x_pm_init(PALMT5_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
+			GPIO_NR_PALMT5_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
+	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmt5_kpc_init();
+	palmt5_keys_init();
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3d284ff..93c11a0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -23,7 +23,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -271,9 +271,9 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
- * WM97xx battery
+ * WM97xx audio, battery
  ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
+static struct wm97xx_batt_pdata palmte2_batt_pdata = {
 	.batt_aux	= WM97XX_AUX_ID3,
 	.temp_aux	= WM97XX_AUX_ID2,
 	.charge_gpio	= -1,
@@ -287,9 +287,14 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 	.batt_name	= "main-batt",
 };
 
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
+static struct wm97xx_pdata palmte2_wm97xx_pdata = {
+	.batt_pdata	= &palmte2_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
+	.codec_pdata	= { &palmte2_wm97xx_pdata, },
+};
+
 static struct palm27x_asoc_info palmte2_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
 };
@@ -361,9 +366,8 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmte2_ac97_pdata);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 3d0c9cc..52defd5 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -24,7 +24,6 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
 #include <linux/w1-gpio.h>
@@ -46,6 +45,7 @@
 #include <mach/pxa2xx-regs.h>
 #include <mach/palmasoc.h>
 #include <mach/camera.h>
+#include <mach/palm27x.h>
 
 #include <sound/pxa2xx-lib.h>
 
@@ -160,31 +160,9 @@ static unsigned long centro685_pin_config[] __initdata = {
 #endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
-	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct pxamci_platform_data centro_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
-	.gpio_card_ro		= -1,
-	.gpio_power		= GPIO_NR_CENTRO_SD_POWER,
-	.gpio_power_invert	= 1,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
@@ -244,19 +222,6 @@ static unsigned int treo680_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
 static unsigned int centro_matrix_keys[] = {
 	KEY(0, 0, KEY_F9),		/* Home */
 	KEY(0, 1, KEY_LEFT),
@@ -316,157 +281,50 @@ static unsigned int centro_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= centro_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(centro_matrix_keys),
+	.matrix_key_map		= treo680_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
 	.direct_key_map		= { KEY_CONNECT },
 	.direct_key_num		= 1,
 
 	.debounce_interval	= 30,
 };
-#endif /* CONFIG_MACH_CENTRO */
 
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo_backlight_init(struct device *dev)
+static void __init palmtreo_kpc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
-	if (ret)
-		goto err2;
-
-	return 0;
+	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
 
-err2:
-	gpio_free(GPIO_NR_TREO_BL_POWER);
-err:
-	return ret;
-}
-
-static int treo_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
-	return TREO_MAX_INTENSITY - brightness;
-};
+	if (machine_is_centro()) {
+		data->matrix_key_map = centro_matrix_keys;
+		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
+	}
 
-static void treo_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO_BL_POWER);
+	pxa_set_keypad_info(&treo680_keypad_pdata);
 }
-
-static struct platform_pwm_backlight_data treo_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= TREO_MAX_INTENSITY,
-	.dft_brightness	= TREO_DEFAULT_INTENSITY,
-	.pwm_period_ns	= TREO_PERIOD_NS,
-	.init		= treo_backlight_init,
-	.notify		= treo_backlight_notify,
-	.exit		= treo_backlight_exit,
-};
-
-static struct platform_device treo_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &treo_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo_ficp_info = {
-	.gpio_pwdown		= GPIO_NR_TREO_IR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
-	.gpio_vbus		= GPIO_NR_TREO_USB_DETECT,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_TREO_USB_PULLUP,
-};
-
+#else
+static inline void palmtreo_kpc_init(void) {}
+#endif
 
 /******************************************************************************
  * USB host
  ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data treo680_ohci_info = {
 	.port_mode    = PMM_PERPORT_MODE,
 	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
 	.power_budget = 0,
 };
-#endif /* CONFIG_MACH_TREO680 */
 
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
+static void __init palmtreo_uhc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_TREO_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int treo_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+	if (machine_is_treo680())
+		pxa_set_ohci_info(&treo680_ohci_info);
 }
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO_POWER_DETECT);
-}
-
-static char *treo_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init		 = power_supply_init,
-	.is_ac_online    = treo_is_ac_online,
-	.exit		 = power_supply_exit,
-	.supplied_to     = treo_supplicants,
-	.num_supplicants = ARRAY_SIZE(treo_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
+#else
+static inline void palmtreo_uhc_init(void) {}
+#endif
 
 /******************************************************************************
  * Vibra and LEDs
@@ -495,16 +353,6 @@ static struct gpio_led_platform_data treo680_gpio_led_info = {
 	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
 };
 
-static struct platform_device treo680_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &treo680_gpio_led_info,
-	}
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
 static struct gpio_led centro_gpio_leds[] = {
 	{
 		.name			= "centro:vibra:vibra",
@@ -529,145 +377,67 @@ static struct gpio_led_platform_data centro_gpio_led_info = {
 	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
 };
 
-static struct platform_device centro_leds = {
+static struct platform_device palmtreo_leds = {
 	.name   = "leds-gpio",
 	.id     = -1,
 	.dev    = {
-		.platform_data  = &centro_gpio_led_info,
+		.platform_data  = &treo680_gpio_led_info,
 	}
 };
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo_lcd_modes[] = {
-{
-	.pixclock		= 86538,
-	.xres			= 320,
-	.yres			= 320,
-	.bpp			= 16,
-
-	.left_margin		= 20,
-	.right_margin		= 8,
-	.upper_margin		= 8,
-	.lower_margin		= 5,
-
-	.hsync_len		= 4,
-	.vsync_len		= 1,
-},
-};
 
-static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+static void __init palmtreo_leds_init(void)
 {
-	gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo_lcd_screen = {
-	.modes		= treo_lcd_modes,
-	.num_modes	= ARRAY_SIZE(treo_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+	if (machine_is_centro())
+		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
 
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo_pm_init(void)
-{
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* this is where the bootloader jumps */
-	memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmtreo_leds);
 }
+#else
+static inline void palmtreo_leds_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *treo_devices[] __initdata = {
-	&treo_backlight,
-	&power_supply,
-};
-
-#ifdef CONFIG_MACH_TREO680
-static struct platform_device *treo680_devices[] __initdata = {
-	&treo680_leds,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct platform_device *centro_devices[] __initdata = {
-	&centro_leds,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/* setup udc GPIOs initial state */
-static void __init treo_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_TREO_USB_PULLUP);
-	}
-}
-
-static void __init treo_lcd_power_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
-	if (ret) {
-		pr_err("Treo680: LCD power GPIO request failed!\n");
-		return;
-	}
-
-	ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
-	if (ret) {
-		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
-		gpio_free(GPIO_NR_TREO_LCD_POWER);
-		return;
-	}
-
-	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
-}
-
 static void __init treo_reserve(void)
 {
 	memblock_reserve(0xa0000000, 0x1000);
 	memblock_reserve(0xa2000000, 0x1000);
 }
 
-static void __init treo_init(void)
+static void __init palmphone_common_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
-
-	treo_pm_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	treo_lcd_power_init();
-	set_pxa_fb_info(&treo_lcd_screen);
-	treo_udc_init();
-	pxa_set_udc_info(&treo_udc_info);
-	pxa_set_ac97_info(&treo_ac97_pdata);
-	pxa_set_ficp_info(&treo_ficp_info);
-
-	platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+	palm27x_pm_init(TREO_STR_BASE);
+	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
+	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
+	palm27x_ac97_init(-1, -1, -1, 95);
+	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
+	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmtreo_kpc_init();
+	palmtreo_uhc_init();
+	palmtreo_leds_init();
 }
 
-#ifdef CONFIG_MACH_TREO680
 static void __init treo680_init(void)
 {
-	treo_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	pxa_set_mci_info(&treo680_mci_platform_data);
-	pxa_set_keypad_info(&treo680_keypad_platform_data);
-	pxa_set_ohci_info(&treo680_ohci_info);
+	palmphone_common_init();
+	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
+			GPIO_NR_TREO680_SD_POWER, 0);
+}
 
-	platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+static void __init centro_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+	palmphone_common_init();
+	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
+			GPIO_NR_CENTRO_SD_POWER, 1);
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
@@ -680,19 +450,6 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
 MACHINE_END
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
-	treo_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	pxa_set_mci_info(&centro_mci_platform_data);
-
-	pxa_set_keypad_info(&centro_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(centro_devices));
-}
 
 MACHINE_START(CENTRO, "Palm Centro 685")
 	.phys_io        = TREO_PHYS_IO_START,
@@ -702,6 +459,5 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-       .init_machine   = centro_init,
+	.init_machine	= centro_init,
 MACHINE_END
-#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index ecc1a40..144dc2b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,7 +25,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/nand.h>
@@ -46,6 +46,7 @@
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -129,6 +130,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition palmtx_partitions[] = {
 	{
 		.name		= "Flash",
@@ -162,20 +164,18 @@ static struct platform_device palmtx_flash = {
 	},
 };
 
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
-	.detect_delay_ms	= 200,
-};
+static void __init palmtx_nor_init(void)
+{
+	platform_device_register(&palmtx_flash);
+}
+#else
+static inline void palmtx_nor_init(void) {}
+#endif
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmtx_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -201,9 +201,18 @@ static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmtx_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+}
+#else
+static inline void palmtx_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmtx_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 };
@@ -221,208 +230,18 @@ static struct platform_device palmtx_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmtx_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTX_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmtx_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmtx_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_BL_POWER);
-	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtx_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMTX_MAX_INTENSITY,
-	.dft_brightness	= PALMTX_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTX_PERIOD_NS,
-	.init		= palmtx_backlight_init,
-	.notify		= palmtx_backlight_notify,
-	.exit		= palmtx_backlight_exit,
-};
-
-static struct platform_device palmtx_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmtx_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmtx_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-};
-
-static struct platform_device palmtx_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtx_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmtx_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
+static void __init palmtx_keys_init(void)
 {
-	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+	platform_device_register(&palmtx_pxa_keys);
 }
-
-static char *palmtx_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmtx_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmtx_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmtx_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmtx_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmtx_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmtx_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmtx_lcd_screen = {
-	.modes		= palmtx_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmtx_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
@@ -482,36 +301,17 @@ static struct platform_device palmtx_nand = {
 	}
 };
 
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmtx_pm_init(void)
+static void __init palmtx_nand_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmtx_nand);
 }
+#else
+static inline void palmtx_nand_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmtx_pxa_keys,
-#endif
-	&palmtx_backlight,
-	&power_supply,
-	&palmtx_asoc,
-	&palmtx_gpio_vbus,
-	&palmtx_flash,
-	&palmtx_nand,
-};
-
 static struct map_desc palmtx_io_desc[] __initdata = {
 {
 	.virtual	= PALMTX_PCMCIA_VIRT,
@@ -537,34 +337,29 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
-/* setup udc GPIOs initial state */
-static void __init palmtx_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
-	}
-}
-
-
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmtx_pm_init();
-	set_pxa_fb_info(&palmtx_lcd_screen);
-	pxa_set_mci_info(&palmtx_mci_platform_data);
-	palmtx_udc_init();
-	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_ficp_info(&palmtx_ficp_platform_data);
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
+			GPIO_NR_PALMTX_SD_POWER, 0);
+	palm27x_pm_init(PALMTX_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
+			GPIO_NR_PALMTX_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
+	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmtx_kpc_init();
+	palmtx_keys_init();
+	palmtx_nor_init();
+	palmtx_nand_init();
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3a7925c..87e4b10 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -27,7 +27,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -44,6 +44,7 @@
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include <mach/pm.h>
 
@@ -109,21 +110,9 @@ static unsigned long palmz72_pin_config[] __initdata = {
 };
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-/* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
-	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
-	.gpio_power_invert	= 1,
-};
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmz72_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -149,77 +138,18 @@ static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmz72_backlight_init(struct device *dev)
+static void __init palmz72_kpc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmz72_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmz72_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
 }
-
-static struct platform_pwm_backlight_data palmz72_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMZ72_MAX_INTENSITY,
-	.dft_brightness	= PALMZ72_MAX_INTENSITY,
-	.pwm_period_ns	= PALMZ72_PERIOD_NS,
-	.init		= palmz72_backlight_init,
-	.notify		= palmz72_backlight_notify,
-	.exit		= palmz72_backlight_exit,
-};
-
-static struct platform_device palmz72_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmz72_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmz72_kpc_init(void) {}
+#endif
 
 /******************************************************************************
  * LEDs
  ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "palmz72:green:led",
@@ -241,139 +171,13 @@ static struct platform_device palmz72_leds = {
 	}
 };
 
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmz72_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMZ72_USB_DETECT_N,
-	.gpio_pullup		= GPIO_NR_PALMZ72_USB_PULLUP,
-};
-
-static struct platform_device palmz72_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmz72_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmz72_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static int palmz72_is_usb_online(void)
+static void __init palmz72_leds_init(void)
 {
-	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+	platform_device_register(&palmz72_leds);
 }
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static char *palmz72_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmz72_is_ac_online,
-	.is_usb_online   = palmz72_is_usb_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmz72_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMZ72_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMZ72_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct platform_device palmz72_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmz72_lcd_modes[] = {
-{
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmz72_lcd_screen = {
-	.modes		= palmz72_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmz72_leds_init(void) {}
+#endif
 
 #ifdef CONFIG_PM
 
@@ -452,40 +256,26 @@ device_initcall(palmz72_pm_init);
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&palmz72_backlight,
-	&palmz72_leds,
-	&palmz72_asoc,
-	&power_supply,
-	&palmz72_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmz72_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
-		gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
-		gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
-	}
-}
-
 static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmz72_lcd_screen);
-	pxa_set_mci_info(&palmz72_mci_platform_data);
-	palmz72_udc_init();
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&palmz72_ficp_platform_data);
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
+			GPIO_NR_PALMZ72_SD_POWER_N, 1);
+	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
+			GPIO_NR_PALMZ72_USB_PULLUP, 0);
+	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
+	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
+			-1, 113);
+	palm27x_pwm_init(-1, -1);
+	palm27x_power_init(-1, -1);
+	palm27x_pmic_init();
+	palmz72_kpc_init();
+	palmz72_leds_init();
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index bc2758b..55e8fcd 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -43,7 +43,6 @@
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
-#include <mach/sharpsl.h>
 #include <mach/pxa2xx_spi.h>
 #include <plat/i2c.h>
 
@@ -53,7 +52,6 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
 static unsigned long poodle_pin_config[] __initdata = {
 	/* I/O */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 0b9ad30..de53f2e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,6 +322,7 @@ void __init pxa26x_init_irq(void)
 
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index c059dac..12e5b9f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -383,6 +383,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f544e58..fa00148 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -52,7 +52,7 @@
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
 
 /* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
 
 /*
  * Get the clock frequency as reflected by CCSR and the turbo flag.
@@ -552,11 +552,23 @@ static void pxa_unmask_ext_wakeup(unsigned int irq)
 	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
 }
 
+static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type)
+{
+	if (flow_type & IRQ_TYPE_EDGE_RISING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0);
+
+	if (flow_type & IRQ_TYPE_EDGE_FALLING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0 + 2);
+
+	return 0;
+}
+
 static struct irq_chip pxa_ext_wakeup_chip = {
 	.name		= "WAKEUP",
 	.ack		= pxa_ack_ext_wakeup,
 	.mask		= pxa_mask_ext_wakeup,
 	.unmask		= pxa_unmask_ext_wakeup,
+	.set_type	= pxa_set_ext_wakeup_type,
 };
 
 static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
@@ -596,6 +608,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d4b61b3..67e04f4 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -745,13 +745,32 @@ static int raumfeld_is_usb_online(void)
 
 static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
 
+static void raumfeld_power_signal_charged(void)
+{
+	struct power_supply *psy =
+		power_supply_get_by_name(raumfeld_power_supplicants[0]);
+
+	if (psy)
+		power_supply_set_battery_charged(psy);
+}
+
+static int raumfeld_power_resume(void)
+{
+	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
+	if (!gpio_get_value(GPIO_CHARGE_DONE))
+		raumfeld_power_signal_charged();
+
+	return 0;
+}
+
 static struct pda_power_pdata power_supply_info = {
 	.init			= power_supply_init,
 	.is_ac_online		= raumfeld_is_ac_online,
 	.is_usb_online		= raumfeld_is_usb_online,
 	.exit			= power_supply_exit,
 	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants)
+	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
+	.resume			= raumfeld_power_resume,
 };
 
 static struct resource power_supply_resources[] = {
@@ -766,13 +785,7 @@ static struct resource power_supply_resources[] = {
 
 static irqreturn_t charge_done_irq(int irq, void *dev_id)
 {
-	struct power_supply *psy;
-
-	psy = power_supply_get_by_name("ds2760-battery.0");
-
-	if (psy)
-		power_supply_set_battery_charged(psy);
-
+	raumfeld_power_signal_charged();
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
deleted file mode 100644
index 0cc1203..0000000
--- a/arch/arm/mach-pxa/sharpsl.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/sharpsl_pm.h>
-
-/*
- * SharpSL Battery/PM Driver
- */
-#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT   4u
-#define MAX1111_BATT_TEMP   2u
-#define MAX1111_ACIN_VOLT   6u
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index cb47672..8fed027 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -29,11 +29,8 @@
 #include <mach/pm.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
 #include <mach/sharpsl_pm.h>
 
-#include "sharpsl.h"
-
 /*
  * Constants
  */
@@ -180,17 +177,12 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-#ifdef CONFIG_CORGI_SSP_DEPRECATED
-	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
-			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
-#else
 	extern int max1111_read_channel(int);
 
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
 	return max1111_read_channel(channel >> 1);
-#endif
 }
 
 static int get_percentage(int voltage)
@@ -277,21 +269,6 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-	    && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
-	    || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 2ed95f3..52c30b0 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -339,10 +339,6 @@ ENTRY(pxa_cpu_resume)
 	mcr	p15, 0, r1, c8, c7, 0   	@ invalidate I & D TLBs
 	mcr	p15, 0, r1, c7, c7, 0		@ invalidate I & D caches, BTB
 
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
-	bic     r9, r9, #0x0004			@ see cpu_xscale_proc_init
-#endif
-
 	mcr	p14, 0, r3, c6, c0, 0		@ clock configuration, turbo mode.
 	mcr	p15, 0, r4, c15, c1, 0		@ CP access reg
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
@@ -368,9 +364,6 @@ sleep_save_sp:
 
 	.text
 resume_after_mmu:
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
-	bl	cpu_xscale_proc_init
-#endif
 	ldmfd	sp!, {r2, r3}
 #ifndef CONFIG_IWMMXT
 	mar	acc0, r2, r3
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 51756c7..1cd99cb 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -18,14 +18,15 @@
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -33,22 +34,25 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
+#include <mach/sharpsl_pm.h>
+
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static unsigned long spitz_pin_config[] __initdata = {
 	/* Chip Selects */
 	GPIO78_nCS_2,	/* SCOOP #2 */
@@ -124,10 +128,13 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
-/*
- * Spitz SCOOP Device #1
- */
-static struct resource spitz_scoop_resources[] = {
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
+/* SCOOP Device #1 */
+static struct resource spitz_scoop_1_resources[] = {
 	[0] = {
 		.start		= 0x10800000,
 		.end		= 0x10800fff,
@@ -135,7 +142,7 @@ static struct resource spitz_scoop_resources[] = {
 	},
 };
 
-static struct scoop_config spitz_scoop_setup = {
+static struct scoop_config spitz_scoop_1_setup = {
 	.io_dir		= SPITZ_SCP_IO_DIR,
 	.io_out		= SPITZ_SCP_IO_OUT,
 	.suspend_clr	= SPITZ_SCP_SUS_CLR,
@@ -143,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = {
 	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
-struct platform_device spitzscoop_device = {
+struct platform_device spitz_scoop_1_device = {
 	.name		= "sharp-scoop",
 	.id		= 0,
 	.dev		= {
- 		.platform_data	= &spitz_scoop_setup,
+		.platform_data	= &spitz_scoop_1_setup,
 	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_resources),
-	.resource	= spitz_scoop_resources,
+	.num_resources	= ARRAY_SIZE(spitz_scoop_1_resources),
+	.resource	= spitz_scoop_1_resources,
 };
 
-/*
- * Spitz SCOOP Device #2
- */
-static struct resource spitz_scoop2_resources[] = {
+/* SCOOP Device #2 */
+static struct resource spitz_scoop_2_resources[] = {
 	[0] = {
 		.start		= 0x08800040,
 		.end		= 0x08800fff,
@@ -164,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = {
 	},
 };
 
-static struct scoop_config spitz_scoop2_setup = {
+static struct scoop_config spitz_scoop_2_setup = {
 	.io_dir		= SPITZ_SCP2_IO_DIR,
 	.io_out		= SPITZ_SCP2_IO_OUT,
 	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
@@ -172,82 +177,110 @@ static struct scoop_config spitz_scoop2_setup = {
 	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
-struct platform_device spitzscoop2_device = {
+struct platform_device spitz_scoop_2_device = {
 	.name		= "sharp-scoop",
 	.id		= 1,
 	.dev		= {
- 		.platform_data	= &spitz_scoop2_setup,
+		.platform_data	= &spitz_scoop_2_setup,
 	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop2_resources),
-	.resource	= spitz_scoop2_resources,
+	.num_resources	= ARRAY_SIZE(spitz_scoop_2_resources),
+	.resource	= spitz_scoop_2_resources,
 };
 
-#define SPITZ_PWR_SD 0x01
-#define SPITZ_PWR_CF 0x02
+static void __init spitz_scoop_init(void)
+{
+	platform_device_register(&spitz_scoop_1_device);
+
+	/* Akita doesn't have the second SCOOP chip */
+	if (!machine_is_akita())
+		platform_device_register(&spitz_scoop_2_device);
+}
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
-	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+	unsigned short cpr;
+	unsigned long flags;
 
-	if (new_cpr & 0x0007) {
+	if (new_cpr & 0x7) {
 		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
-		if (!(cpr & 0x0002) && !(cpr & 0x0004))
-		        mdelay(5);
-		if (device == SPITZ_PWR_CF)
-		        cpr |= 0x0002;
-		if (device == SPITZ_PWR_SD)
-		        cpr |= 0x0004;
-	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-	} else {
-		if (device == SPITZ_PWR_CF)
-		        cpr &= ~0x0002;
-		if (device == SPITZ_PWR_SD)
-		        cpr &= ~0x0004;
-		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
-			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
-		        mdelay(1);
-			gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
-		} else {
-		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-		}
+		mdelay(5);
+	}
+
+	local_irq_save(flags);
+
+	cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+	if (enable & new_cpr)
+		cpr |= new_cpr;
+	else
+		cpr &= ~enable;
+
+	write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+	local_irq_restore(flags);
+
+	if (!(cpr & 0x7)) {
+		mdelay(1);
+		gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 	}
 }
 
-static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
 {
 	/* Only need to override behaviour for slot 0 */
 	if (nr == 0)
-		spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+		spitz_card_pwr_ctrl(
+			cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
 	else
 		write_scoop_reg(scoop, SCOOP_CPR, cpr);
 }
 
 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-{
-	.dev        = &spitzscoop_device.dev,
-	.irq        = SPITZ_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = SPITZ_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &spitzscoop2_device.dev,
-	.irq        = SPITZ_IRQ_GPIO_CF2_IRQ,
-	.cd_irq     = -1,
-},
+	{
+		.dev		= &spitz_scoop_1_device.dev,
+		.irq		= SPITZ_IRQ_GPIO_CF_IRQ,
+		.cd_irq		= SPITZ_IRQ_GPIO_CF_CD,
+		.cd_irq_str	= "PCMCIA0 CD",
+	}, {
+		.dev		= &spitz_scoop_2_device.dev,
+		.irq		= SPITZ_IRQ_GPIO_CF2_IRQ,
+		.cd_irq		= -1,
+	},
 };
 
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
-	.devs         = &spitz_pcmcia_scoop[0],
-	.num_devs     = 2,
-	.power_ctrl   = spitz_pcmcia_pwr,
+	.devs		= &spitz_pcmcia_scoop[0],
+	.num_devs	= 2,
+	.power_ctrl	= spitz_pcmcia_pwr,
 };
 
-EXPORT_SYMBOL(spitzscoop_device);
-EXPORT_SYMBOL(spitzscoop2_device);
+static void __init spitz_pcmcia_init(void)
+{
+	/* Akita has only one PCMCIA slot used */
+	if (machine_is_akita())
+		spitz_pcmcia_config.num_devs = 1;
+
+	platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 
-/*
- * Spitz Keyboard Device
- */
 #define SPITZ_KEY_CALENDAR	KEY_F1
 #define SPITZ_KEY_ADDRESS	KEY_F2
 #define SPITZ_KEY_FN		KEY_F3
@@ -263,7 +296,7 @@ EXPORT_SYMBOL(spitzscoop2_device);
 #define SPITZ_KEY_OK		KEY_F11
 #define SPITZ_KEY_MENU		KEY_F12
 
-static const uint32_t spitzkbd_keymap[] = {
+static const uint32_t spitz_keymap[] = {
 	KEY(0, 0, KEY_LEFTCTRL),
 	KEY(0, 1, KEY_1),
 	KEY(0, 2, KEY_3),
@@ -330,36 +363,47 @@ static const uint32_t spitzkbd_keymap[] = {
 	KEY(6, 8, KEY_RIGHT),
 };
 
-static const struct matrix_keymap_data spitzkbd_keymap_data = {
-	.keymap		= spitzkbd_keymap,
-	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+static const struct matrix_keymap_data spitz_keymap_data = {
+	.keymap		= spitz_keymap,
+	.keymap_size	= ARRAY_SIZE(spitz_keymap),
 };
 
-static const uint32_t spitzkbd_row_gpios[] =
+static const uint32_t spitz_row_gpios[] =
 		{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitzkbd_col_gpios[] =
+static const uint32_t spitz_col_gpios[] =
 		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
 
-static struct matrix_keypad_platform_data spitzkbd_pdata = {
-	.keymap_data		= &spitzkbd_keymap_data,
-	.row_gpios		= spitzkbd_row_gpios,
-	.col_gpios		= spitzkbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+static struct matrix_keypad_platform_data spitz_mkp_pdata = {
+	.keymap_data		= &spitz_keymap_data,
+	.row_gpios		= spitz_row_gpios,
+	.col_gpios		= spitz_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitz_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitz_col_gpios),
 	.col_scan_delay_us	= 10,
 	.debounce_ms		= 10,
 	.wakeup			= 1,
 };
 
-static struct platform_device spitzkbd_device = {
+static struct platform_device spitz_mkp_device = {
 	.name		= "matrix-keypad",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &spitzkbd_pdata,
+		.platform_data	= &spitz_mkp_pdata,
 	},
 };
 
+static void __init spitz_mkp_init(void)
+{
+	platform_device_register(&spitz_mkp_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
 
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button spitz_gpio_keys[] = {
 	{
 		.type	= EV_PWR,
@@ -396,10 +440,18 @@ static struct platform_device spitz_gpio_keys_device = {
 	},
 };
 
+static void __init spitz_keys_init(void)
+{
+	platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
 
-/*
- * Spitz LEDs
- */
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led spitz_gpio_leds[] = {
 	{
 		.name			= "spitz:amber:charge",
@@ -418,20 +470,27 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = {
 	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
 };
 
-static struct platform_device spitzled_device = {
+static struct platform_device spitz_led_device = {
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &spitz_gpio_leds_info,
+		.platform_data	= &spitz_gpio_leds_info,
 	},
 };
 
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master spitz_spi_info = {
-	.num_chipselect	= 3,
-};
+static void __init spitz_leds_init(void)
+{
+	platform_device_register(&spitz_led_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
 
-static void spitz_wait_for_hsync(void)
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static void spitz_ads7846_wait_for_hsync(void)
 {
 	while (gpio_get_value(SPITZ_GPIO_HSYNC))
 		cpu_relax();
@@ -447,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
-	.wait_for_sync		= spitz_wait_for_hsync,
+	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
@@ -485,72 +544,88 @@ static struct pxa2xx_spi_chip spitz_max1111_chip = {
 
 static struct spi_board_info spitz_spi_devices[] = {
 	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.platform_data	= &spitz_ads7846_info,
-		.controller_data= &spitz_ads7846_chip,
-		.irq		= gpio_to_irq(SPITZ_GPIO_TP_INT),
+		.modalias		= "ads7846",
+		.max_speed_hz		= 1200000,
+		.bus_num		= 2,
+		.chip_select		= 0,
+		.platform_data		= &spitz_ads7846_info,
+		.controller_data	= &spitz_ads7846_chip,
+		.irq			= gpio_to_irq(SPITZ_GPIO_TP_INT),
 	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 2,
-		.chip_select	= 1,
-		.platform_data	= &spitz_lcdcon_info,
-		.controller_data= &spitz_lcdcon_chip,
+		.modalias		= "corgi-lcd",
+		.max_speed_hz		= 50000,
+		.bus_num		= 2,
+		.chip_select		= 1,
+		.platform_data		= &spitz_lcdcon_info,
+		.controller_data	= &spitz_lcdcon_chip,
 	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 2,
-		.chip_select	= 2,
-		.controller_data= &spitz_max1111_chip,
+		.modalias		= "max1111",
+		.max_speed_hz		= 450000,
+		.bus_num		= 2,
+		.chip_select		= 2,
+		.controller_data	= &spitz_max1111_chip,
 	},
 };
 
-static void __init spitz_init_spi(void)
+static struct pxa2xx_spi_master spitz_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static void __init spitz_spi_init(void)
 {
+	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
 	if (machine_is_akita()) {
-		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
 	}
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
 #else
-static inline void spitz_init_spi(void) {}
+static inline void spitz_spi_init(void) {}
 #endif
 
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 /*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
  */
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+	if ((1 << vdd) & p_d->ocr_mask)
+		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
 	else
-		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
+		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower 		= spitz_mci_setpower,
+	.setpower		= spitz_mci_setpower,
 	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
 	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };
 
+static void __init spitz_mmc_init(void)
+{
+	pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
 
-/*
- * USB Host (OHCI)
- */
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int spitz_ohci_init(struct device *dev)
 {
 	int err;
@@ -559,9 +634,7 @@ static int spitz_ohci_init(struct device *dev)
 	if (err)
 		return err;
 
-	/* Only Port 2 is connected
-	 * Setup USB Port 2 Output Control Register
-	 */
+	/* Only Port 2 is connected, setup USB Port 2 Output Control Register */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
@@ -580,67 +653,95 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.power_budget	= 150,
 };
 
+static void __init spitz_uhc_init(void)
+{
+	pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
 
-/*
- * Irda
- */
-
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
+static void __init spitz_irda_init(void)
+{
+	if (machine_is_akita())
+		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+	else
+		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
-/*
- * Spitz PXA Framebuffer
- */
+	pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
 
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
-{
-	.pixclock       = 19231,
-	.xres           = 480,
-	.yres           = 640,
-	.bpp            = 16,
-	.hsync_len      = 40,
-	.left_margin    = 46,
-	.right_margin   = 125,
-	.vsync_len      = 3,
-	.upper_margin   = 1,
-	.lower_margin   = 0,
-	.sync           = 0,
-},{
-	.pixclock       = 134617,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 20,
-	.left_margin    = 20,
-	.right_margin   = 46,
-	.vsync_len      = 2,
-	.upper_margin   = 1,
-	.lower_margin   = 0,
-	.sync           = 0,
-},
+	{
+		.pixclock       = 19231,
+		.xres           = 480,
+		.yres           = 640,
+		.bpp            = 16,
+		.hsync_len      = 40,
+		.left_margin    = 46,
+		.right_margin   = 125,
+		.vsync_len      = 3,
+		.upper_margin   = 1,
+		.lower_margin   = 0,
+		.sync           = 0,
+	}, {
+		.pixclock       = 134617,
+		.xres           = 240,
+		.yres           = 320,
+		.bpp            = 16,
+		.hsync_len      = 20,
+		.left_margin    = 20,
+		.right_margin   = 46,
+		.vsync_len      = 2,
+		.upper_margin   = 1,
+		.lower_margin   = 0,
+		.sync           = 0,
+	},
 };
 
 static struct pxafb_mach_info spitz_pxafb_info = {
-	.modes          = &spitz_pxafb_modes[0],
-	.num_modes      = 2,
+	.modes          = spitz_pxafb_modes,
+	.num_modes      = ARRAY_SIZE(spitz_pxafb_modes),
 	.fixed_modes    = 1,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
-static struct mtd_partition sharpsl_nand_partitions[] = {
+static void __init spitz_lcd_init(void)
+{
+	set_pxa_fb_info(&spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
+static struct mtd_partition spitz_nand_partitions[] = {
 	{
 		.name = "System Area",
 		.offset = 0,
 		.size = 7 * 1024 * 1024,
-	},
-	{
+	}, {
 		.name = "Root Filesystem",
 		.offset = 7 * 1024 * 1024,
-	},
-	{
+	}, {
 		.name = "Home Filesystem",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
@@ -649,37 +750,72 @@ static struct mtd_partition sharpsl_nand_partitions[] = {
 
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
+static struct nand_bbt_descr spitz_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+	.oobfree	= { {0x08, 0x09} },
+	.eccbytes	= 24,
+	.eccpos		= {
+			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
+			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
+	},
 };
 
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
+static struct sharpsl_nand_platform_data spitz_nand_pdata = {
+	.badblock_pattern	= &spitz_nand_bbt,
+	.partitions		= spitz_nand_partitions,
+	.nr_partitions		= ARRAY_SIZE(spitz_nand_partitions),
 };
 
-static struct resource sharpsl_nand_resources[] = {
+static struct resource spitz_nand_resources[] = {
 	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device sharpsl_nand_device = {
+static struct platform_device spitz_nand_device = {
 	.name		= "sharpsl-nand",
 	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
+	.resource	= spitz_nand_resources,
+	.num_resources	= ARRAY_SIZE(spitz_nand_resources),
+	.dev		= {
+		.platform_data	= &spitz_nand_pdata,
+	}
 };
 
+static void __init spitz_nand_init(void)
+{
+	if (machine_is_spitz()) {
+		spitz_nand_partitions[1].size = 5 * 1024 * 1024;
+	} else if (machine_is_akita()) {
+		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
+		spitz_nand_bbt.len = 1;
+		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+	} else if (machine_is_borzoi()) {
+		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
+		spitz_nand_bbt.len = 1;
+		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+	}
+
+	platform_device_register(&spitz_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
 
-static struct mtd_partition sharpsl_rom_parts[] = {
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition spitz_rom_parts[] = {
 	{
 		.name	="Boot PROM Filesystem",
 		.offset	= 0x00140000,
@@ -687,37 +823,105 @@ static struct mtd_partition sharpsl_rom_parts[] = {
 	},
 };
 
-static struct physmap_flash_data sharpsl_rom_data = {
+static struct physmap_flash_data spitz_rom_data = {
 	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
+	.nr_parts	= ARRAY_SIZE(spitz_rom_parts),
+	.parts		= spitz_rom_parts,
 };
 
-static struct resource sharpsl_rom_resources[] = {
+static struct resource spitz_rom_resources[] = {
 	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_8M - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
+static struct platform_device spitz_rom_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= spitz_rom_resources,
+	.num_resources	= ARRAY_SIZE(spitz_rom_resources),
+	.dev		= {
+		.platform_data	= &spitz_rom_data,
+	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&spitzscoop_device,
-	&spitzkbd_device,
-	&spitz_gpio_keys_device,
-	&spitzled_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
+static void __init spitz_nor_init(void)
+{
+	platform_device_register(&spitz_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
 };
 
+static struct i2c_board_info spitz_i2c_devs[] = {
+	{
+		.type		= "wm8750",
+		.addr		= 0x1b,
+	}, {
+		.type		= "max7310",
+		.addr		= 0x18,
+		.platform_data	= &akita_pca953x_pdata,
+	},
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data isl6271a_info[] = {
+	{
+		.constraints = {
+			.name		= "vcc_core range",
+			.min_uV		= 850000,
+			.max_uV		= 1600000,
+			.always_on	= 1,
+			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		},
+	.consumer_supplies	= isl6271a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(isl6271a_consumers),
+	}
+};
+
+static struct i2c_board_info spitz_pi2c_devs[] = {
+	{
+		.type		= "isl6271a",
+		.addr		= 0x0c,
+		.platform_data	= &isl6271a_info,
+	},
+};
+
+static void __init spitz_i2c_init(void)
+{
+	int size = ARRAY_SIZE(spitz_i2c_devs);
+
+	/* Only Akita has the max7310 chip */
+	if (!machine_is_akita())
+		size--;
+
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, spitz_i2c_devs, size);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
 static void spitz_poweroff(void)
 {
 	arm_machine_restart('g', NULL);
@@ -726,26 +930,18 @@ static void spitz_poweroff(void)
 static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
-	if((MSC0 & 0xffff0000) == 0x7ff00000)
+	if ((MSC0 & 0xffff0000) == 0x7ff00000)
 		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
 
 	spitz_poweroff();
 }
 
-static void __init common_init(void)
+static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
-	if (machine_is_spitz()) {
-		sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
-	} else if (machine_is_akita()) {
-		sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
-	} else if (machine_is_borzoi()) {
-		sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
-	}
-
 	PMCR = 0x00;
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
@@ -757,91 +953,22 @@ static void __init common_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	spitz_init_spi();
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_mci_info(&spitz_mci_platform_data);
-	pxa_set_ohci_info(&spitz_ohci_platform_data);
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-	set_pxa_fb_info(&spitz_pxafb_info);
-	pxa_set_i2c_info(NULL);
+	spitz_spi_init();
+	spitz_scoop_init();
+	spitz_mkp_init();
+	spitz_keys_init();
+	spitz_leds_init();
+	spitz_mmc_init();
+	spitz_pcmcia_init();
+	spitz_irda_init();
+	spitz_uhc_init();
+	spitz_lcd_init();
+	spitz_nor_init();
+	spitz_nand_init();
+	spitz_i2c_init();
 }
 
-#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.eccbytes = 24,
-	.eccpos = {
-		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-	.oobfree = {{0x08, 0x09}}
-};
-#endif
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void __init spitz_init(void)
-{
-	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-#ifdef CONFIG_MACH_BORZOI
-	if (machine_is_borzoi()) {
-		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-	}
-#endif
-
-	platform_scoop_config = &spitz_pcmcia_config;
-
-	common_init();
-
-	platform_device_register(&spitzscoop2_device);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-/*
- * Akita IO Expander
- */
-static struct pca953x_platform_data akita_ioexp = {
-	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info akita_i2c_board_info[] = {
-	{
-		.type		= "max7310",
-		.addr		= 0x18,
-		.platform_data	= &akita_ioexp,
-	}, {
-		.type		= "wm8750",
-		.addr		= 0x1b,
-	},
-};
-
-static void __init akita_init(void)
-{
-	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-
-	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-
-	/* We just pretend the second element of the array doesn't exist */
-	spitz_pcmcia_config.num_devs = 1;
-	platform_scoop_config = &spitz_pcmcia_config;
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
-
-	common_init();
-}
-#endif
-
-static void __init fixup_spitz(struct machine_desc *desc,
+static void __init spitz_fixup(struct machine_desc *desc,
 		struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	sharpsl_save_param();
@@ -854,7 +981,7 @@ static void __init fixup_spitz(struct machine_desc *desc,
 MACHINE_START(SPITZ, "SHARP Spitz")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
@@ -866,7 +993,7 @@ MACHINE_END
 MACHINE_START(BORZOI, "SHARP Borzoi")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
@@ -878,10 +1005,10 @@ MACHINE_END
 MACHINE_START(AKITA, "SHARP Akita")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
-	.init_machine	= akita_init,
+	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 4209ddf..7fe7406 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -22,11 +22,10 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/sharpsl.h>
 #include <mach/spitz.h>
 #include <mach/pxa27x.h>
+#include <mach/sharpsl_pm.h>
 
-#include "sharpsl.h"
 #include "generic.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -178,11 +177,11 @@ unsigned long spitzpm_read_devdata(int type)
 	case SHARPSL_STATUS_ACIN:
 		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
 	case SHARPSL_STATUS_FATAL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
 	case SHARPSL_ACIN_VOLT:
 		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
 	case SHARPSL_BATT_TEMP:
@@ -212,8 +211,6 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.should_wakeup    = spitz_should_wakeup,
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
-	.backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index af40d2a..a654d1e 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -29,6 +29,7 @@
 #include <linux/i2c/at24.h>
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -62,37 +63,12 @@
 #define SG2_GPIO_nSD_DETECT	90
 #define SG2_SD_POWER_ENABLE	89
 
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
+static unsigned long sg2_im2_unified_pin_config[] __initdata = {
 	/* Device Identification for wakeup*/
 	GPIO102_GPIO,
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
 	/* DA9030 */
 	GPIO1_GPIO,
 
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,
@@ -100,49 +76,44 @@ static unsigned long stargate2_pin_config[] __initdata = {
 	GPIO109_MMC_DAT_1,
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
 
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
-
-	/* cc2420 802.15.4 radio */
-	GPIO22_GPIO,		/* CC_RSTN  (out)*/
-	GPIO114_GPIO,		/* CC_FIFO (in) */
-	GPIO116_GPIO, 		/* CC_CCA (in) */
-	GPIO0_GPIO,		/* CC_FIFOP (in) */
-	GPIO16_GPIO,		/* CCSFD (in) */
-	GPIO39_GPIO,		/* CSn (out) */
+	/* 802.15.4 radio - driver out of mainline */
+	GPIO22_GPIO,			/* CC_RSTN */
+	GPIO114_GPIO,			/* CC_FIFO */
+	GPIO116_GPIO,			/* CC_CCA */
+	GPIO0_GPIO,			/* CC_FIFOP */
+	GPIO16_GPIO,			/* CCSFD */
+	GPIO115_GPIO,			/* Power enable */
 
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
 	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO, /* chip select */
+	GPIO39_GPIO,			/* Chip Select */
 	GPIO34_SSP3_SCLK,
 	GPIO35_SSP3_TXD,
 	GPIO41_SSP3_RXD,
 
-	/* SSP 2 */
+	/* SSP 2 to daughter boards */
 	GPIO11_SSP2_RXD,
 	GPIO38_SSP2_TXD,
 	GPIO36_SSP2_SCLK,
 	GPIO37_GPIO, /* chip select */
 
-	/* SSP 1 */
-	GPIO26_SSP1_RXD,
-	GPIO25_SSP1_TXD,
+	/* SSP 1 - to daughter boards */
+	GPIO24_GPIO,			/* Chip Select */
 	GPIO23_SSP1_SCLK,
-	GPIO24_GPIO, /* chip select */
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
 
-	/* BTUART */
+	/* BTUART Basic Connector*/
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* STUART */
+	/* STUART  - IM2 via debug board not sure on SG2*/
 	GPIO46_STUART_RXD,
 	GPIO47_STUART_TXD,
 
@@ -150,47 +121,17 @@ static unsigned long stargate2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-
 	/* SHT15 */
 	GPIO100_GPIO,
 	GPIO98_GPIO,
-};
 
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
 
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
 };
 
 static struct sht15_platform_data platform_data_sht15 = {
@@ -352,20 +293,184 @@ static struct regulator_init_data stargate2_ldo_init_data[] = {
 	},
 };
 
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+static struct mtd_partition stargate2flash_partitions[] = {
 	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
 	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
 	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
 	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init imote2_stargate2_init(void)
+{
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+}
+
+#ifdef CONFIG_MACH_INTELMOTE2
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+	return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
+};
+
+static struct gpio_led imote2_led_pins[] = {
+	{
+		.name       =  "imote2:red",
+		.gpio       = 103,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:green",
+		.gpio       = 104,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:blue",
+		.gpio       = 105,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+	.num_leds = ARRAY_SIZE(imote2_led_pins),
+	.leds     = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data = &imote2_led_data,
+	},
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+	{
 		.name = "da903x-regulator",
 		.id = DA9030_ID_LDO2,
 		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
@@ -428,9 +533,121 @@ static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
 	},
 };
 
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
+static struct da903x_platform_data imote2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+	.subdevs = imote2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &imote2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+	{ /* UCAM sensor board */
+		.type = "max1239",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
+	},
+};
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+	/* Button */
+	GPIO91_GPIO,
+
+	/* LEDS */
+	GPIO103_GPIO, /* red led */
+	GPIO104_GPIO, /* green led */
+	GPIO105_GPIO, /* blue led */
+};
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *imote2_devices[] = {
+	&stargate2_flash_device,
+	&imote2_leds,
+	&sht15,
+};
+
+static void __init imote2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	imote2_stargate2_init();
+
+	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+	i2c_register_board_info(0, imote2_i2c_board_info,
+				ARRAY_SIZE(imote2_i2c_board_info));
+	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+				ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+	pxa_set_mci_info(&imote2_mci_platform_data);
+	pxa_set_udc_info(&imote2_udc_info);
+}
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC not shared with imote2 */
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
 };
 
 static struct resource smc91x_resources[] = {
@@ -463,7 +680,6 @@ static struct platform_device smc91x_device = {
 };
 
 
-
 /*
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert / eject.
@@ -532,48 +748,6 @@ static struct pxamci_platform_data stargate2_mci_platform_data = {
 	.exit = stargate2_mci_exit,
 };
 
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
 
 /*
  * SRAM - The Stargate 2 has 32MB of SRAM.
@@ -616,6 +790,129 @@ static struct at24_platform_data pca9500_eeprom_pdata = {
 	.page_size = 4,
 };
 
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
 
 static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
 	/* Techically this a pca9500 - but it's compatible with the 8574
@@ -653,74 +950,6 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
 	},
 };
 
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = gpio_to_irq(1),
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
 /* Board doesn't support cable detection - so always lie and say
  * something is there.
  */
@@ -741,14 +970,6 @@ static struct platform_device *stargate2_devices[] = {
 	&sht15,
 };
 
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
 static void __init stargate2_init(void)
 {
 	/* This is probably a board specific hack as this must be set
@@ -757,22 +978,13 @@ static void __init stargate2_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
+	imote2_stargate2_init();
 
 	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
 
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
 	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1,
-				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
+	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
+				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
 
 	pxa_set_mci_info(&stargate2_mci_platform_data);
 
@@ -780,7 +992,21 @@ static void __init stargate2_init(void)
 
 	stargate2_reset_bluetooth();
 }
+#endif
+
+#ifdef CONFIG_MACH_INTELMOTE2
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= imote2_init,
+	.boot_params	= 0xA0000100,
+MACHINE_END
+#endif
 
+#ifdef CONFIG_MACH_STARGATE2
 MACHINE_START(STARGATE2, "Stargate 2")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -790,3 +1016,4 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.init_machine = stargate2_init,
 	.boot_params = 0xA0000100,
 MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 6968911..0acff17 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -530,13 +530,9 @@ static void __init trizeps4_init(void)
 	i2c_register_board_info(0, trizeps4_i2c_devices,
 					ARRAY_SIZE(trizeps4_i2c_devices));
 
-#ifdef CONFIG_IDE_PXA_CF
-	/* if boot direct from compact flash dont disable power */
-	trizeps_conxs_bcr = 0x0009;
-#else
 	/* this is the reset value */
 	trizeps_conxs_bcr = 0x00A0;
-#endif
+
 	BCR_writew(trizeps_conxs_bcr);
 	board_backlight_power(1);
 }
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 9884fa9..c9b747c 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -25,6 +25,7 @@
 #include <linux/dm9000.h>
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
+#include <mach/pata_pxa.h>
 
 #include <plat/i2c.h>
 
@@ -464,7 +466,6 @@ static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
 
 static void __init vpac270_rtc_init(void)
 {
-	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
 }
 #else
@@ -492,7 +493,55 @@ static struct pxafb_mode_info vpac270_lcd_modes[] = {
 	.vsync_len	= 2,
 
 	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-},
+}, {	/* CRT 640x480 */
+	.pixclock	= 35000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 96,
+	.right_margin	= 48,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+
+	.hsync_len	= 48,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, {	/* CRT 800x600 H=30kHz V=48HZ */
+	.pixclock	= 25000,
+	.xres		= 800,
+	.yres		= 600,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 50,
+	.right_margin	= 1,
+	.upper_margin	= 21,
+	.lower_margin	= 12,
+
+	.hsync_len	= 8,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, {	/* CRT 1024x768 H=40kHz V=50Hz */
+	.pixclock	= 15000,
+	.xres		= 1024,
+	.yres		= 768,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 220,
+	.right_margin	= 8,
+	.upper_margin	= 33,
+	.lower_margin	= 2,
+
+	.hsync_len	= 48,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}
 };
 
 static struct pxafb_mach_info vpac270_lcd_screen = {
@@ -538,9 +587,10 @@ static inline void vpac270_lcd_init(void) {}
 /******************************************************************************
  * PATA IDE
  ******************************************************************************/
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-static struct pata_platform_info vpac270_pata_pdata = {
-	.ioport_shift	= 1,
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+	.reg_shift	= 1,
+	.dma_dreq	= 1,
 	.irq_flags	= IRQF_TRIGGER_RISING,
 };
 
@@ -555,7 +605,12 @@ static struct resource vpac270_ide_resources[] = {
 	       .end	= PXA_CS3_PHYS + 0x15f,
 	       .flags	= IORESOURCE_MEM
 	},
-	[2] = {	/* IDE IRQ pin */
+	[2] = {	/* DMA Base address */
+	       .start	= PXA_CS3_PHYS + 0x20,
+	       .end	= PXA_CS3_PHYS + 0x2f,
+	       .flags	= IORESOURCE_DMA
+	},
+	[3] = {	/* IDE IRQ pin */
 	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
 	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
 	       .flags	= IORESOURCE_IRQ
@@ -563,11 +618,12 @@ static struct resource vpac270_ide_resources[] = {
 };
 
 static struct platform_device vpac270_ide_device = {
-	.name		= "pata_platform",
+	.name		= "pata_pxa",
 	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
 	.resource	= vpac270_ide_resources,
 	.dev		= {
 		.platform_data	= &vpac270_pata_pdata,
+		.coherent_dma_mask	= 0xffffffff,
 	}
 };
 
@@ -580,6 +636,59 @@ static inline void vpac270_ide_init(void) {}
 #endif
 
 /******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data vpac270_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= vpac270_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
+};
+
+static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &vpac270_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data vpac270_max1587a_info = {
+	.subdevs     = vpac270_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &vpac270_max1587a_info,
+	},
+};
+
+static void __init vpac270_pmic_init(void)
+{
+	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
+}
+#else
+static inline void vpac270_pmic_init(void) {}
+#endif
+
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init vpac270_init(void)
@@ -589,7 +698,10 @@ static void __init vpac270_init(void)
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
 
+	vpac270_pmic_init();
 	vpac270_lcd_init();
 	vpac270_mmc_init();
 	vpac270_nor_init();
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index d303c69..f0d0228 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/libertas_spi.h>
@@ -26,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -162,7 +164,7 @@ static struct mtd_partition z2_flash_parts[] = {
 	}, {
 		.name	= "U-Boot Environment",
 		.offset	= 0x40000,
-		.size	= 0x60000,
+		.size	= 0x20000,
 	}, {
 		.name	= "Flash",
 		.offset	= 0x60000,
@@ -452,6 +454,42 @@ static inline void z2_keys_init(void) {}
 #endif
 
 /******************************************************************************
+ * Battery
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct z2_battery_info batt_chip_info = {
+	.batt_I2C_bus	= 0,
+	.batt_I2C_addr	= 0x55,
+	.batt_I2C_reg	= 2,
+	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
+	.min_voltage	= 2400000,
+	.max_voltage	= 3700000,
+	.batt_div	= 69,
+	.batt_mult	= 1000000,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
+	.batt_name	= "Z2",
+};
+
+static struct i2c_board_info __initdata z2_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("aer915", 0x55),
+		.platform_data	= &batt_chip_info,
+	}, {
+		I2C_BOARD_INFO("wm8750", 0x1b),
+	},
+
+};
+
+static void __init z2_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
+}
+#else
+static inline void z2_i2c_init(void) {}
+#endif
+
+/******************************************************************************
  * SSP Devices - WiFi and LCD control
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
@@ -573,23 +611,95 @@ static inline void z2_spi_init(void) {}
 #endif
 
 /******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_TPS65023) || \
+	defined(CONFIG_REGULATOR_TPS65023_MODULE)
+static struct regulator_consumer_supply z2_tps65021_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data z2_tps65021_info[] = {
+	{
+		.constraints = {
+			.name		= "vcc_core range",
+			.min_uV		= 800000,
+			.max_uV		= 1600000,
+			.always_on	= 1,
+			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		},
+		.consumer_supplies	= z2_tps65021_consumers,
+		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
+	}, {
+		.constraints = {
+			.name		= "DCDC2",
+			.min_uV		= 3300000,
+			.max_uV		= 3300000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "DCDC3",
+			.min_uV		= 1800000,
+			.max_uV		= 1800000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "LDO1",
+			.min_uV		= 1000000,
+			.max_uV		= 3150000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "LDO2",
+			.min_uV		= 1050000,
+			.max_uV		= 3300000,
+			.always_on	= 1,
+		},
+	}
+};
+
+static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65021", 0x48),
+		.platform_data	= &z2_tps65021_info,
+	},
+};
+
+static void __init z2_pmic_init(void)
+{
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
+}
+#else
+static inline void z2_pmic_init(void) {}
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init z2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	z2_lcd_init();
 	z2_mmc_init();
 	z2_mkp_init();
-
-	pxa_set_i2c_info(NULL);
-
+	z2_i2c_init();
 	z2_spi_init();
 	z2_nor_init();
 	z2_pwm_init();
 	z2_leds_init();
 	z2_keys_init();
+	z2_pmic_init();
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f5a5972..071e8a1 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -57,11 +57,21 @@ config S3C64XX_SETUP_I2C1
 	help
 	  Common setup code for i2c bus 1.
 
+config S3C64XX_SETUP_IDE
+	bool
+	help
+	  Common setup code for S3C64XX IDE.
+
 config S3C64XX_SETUP_FB_24BPP
 	bool
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for S3C64XX KEYPAD GPIO configurations
+
 config S3C64XX_SETUP_SDHCI_GPIO
 	bool
 	help
@@ -95,15 +105,20 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
+	select SAMSUNG_DEV_IDE
 	select S3C_DEV_FB
+	select S3C_DEV_RTC
 	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
+	select SAMSUNG_DEV_KEYPAD
 	select HAVE_S3C2410_WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
 	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_KEYPAD
 	help
 	  Machine support for the Samsung SMDK6410
 
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 9d10069..48d3dfa 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -35,6 +35,8 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index fbd85a9..7e03f0a 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -133,6 +133,12 @@ static struct clk init_clocks_disable[] = {
 		.id		= -1,
 		.parent		= &clk_h,
 	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
 		.name		= "adc",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -165,6 +171,12 @@ static struct clk init_clocks_disable[] = {
 		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
 	}, {
 #endif
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
+	}, {
 		.name		= "spi",
 		.id		= 0,
 		.parent		= &clk_p,
@@ -295,12 +307,6 @@ static struct clk init_clocks[] = {
 		.enable		= s3c64xx_pclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
 	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
 		.name		= "watchdog",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -310,6 +316,12 @@ static struct clk init_clocks[] = {
 		.id		= -1,
 		.parent		= &clk_p,
 		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}, {
+		.name		= "cfcon",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
 	}
 };
 
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index c3e9e73..9648fbc 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -12,11 +12,11 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
 #include <mach/dma.h>
-#include <mach/gpio.h>
 
 #include <plat/devs.h>
 #include <plat/audio.h>
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 29c32d0..a492b98 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -12,10 +12,10 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
-#include <mach/gpio.h>
 #include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
 
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index 60c929a..300dee4 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/map.h>
-#include <mach/gpio.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index e1eab3c..a1f13f0 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -67,6 +67,7 @@
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_KEYPAD	(0x7E00A000)
 #define S3C64XX_PA_ADC		(0x7E00B000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_AC97		(0x7F001000)
@@ -86,6 +87,9 @@
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
+
+#define S3C64XX_PA_CFCON	(0x70300000)
+
 #define S3C64XX_PA_VIC0		(0x71200000)
 #define S3C64XX_PA_VIC1		(0x71300000)
 
@@ -120,5 +124,7 @@
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 
 #define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 0114eb0..05332b9 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -34,6 +34,7 @@
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
 #define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 #define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
@@ -154,4 +155,8 @@
 #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
 #define S3C6400_CLKSRC_MFC		(1 << 4)
 
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF		0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
+
 #endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d9a0355..b5d7861 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/input.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -56,6 +57,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-srom.h>
+#include <plat/ata.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
@@ -66,6 +68,7 @@
 #include <plat/cpu.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
+#include <plat/keypad.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -242,6 +245,29 @@ static struct platform_device smdk6410_b_pwr_5v = {
 };
 #endif
 
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+	.setup_gpio	= s3c64xx_ide_setup_gpio,
+};
+
+static uint32_t smdk6410_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
+	.keymap		= smdk6410_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk6410_keymap),
+};
+
+static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
+	.keymap_data	= &smdk6410_keymap_data,
+	.rows		= 2,
+	.cols		= 8,
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -257,6 +283,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iisv4,
+	&samsung_device_keypad,
 
 #ifdef CONFIG_REGULATOR
 	&smdk6410_b_pwr_5v,
@@ -265,6 +292,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 
 	&smdk6410_smsc911x,
 	&s3c_device_adc,
+	&s3c_device_cfcon,
+	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 };
@@ -636,6 +665,8 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	samsung_keypad_set_platdata(&smdk6410_keypad_data);
+
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
 	/* configure nCS1 width to 16 bits */
@@ -665,6 +696,8 @@ static void __init smdk6410_machine_init(void)
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
+	s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 }
 
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 014401c..312aa6b 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -37,8 +37,9 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/sdhci.h>
+#include <plat/ata-core.h>
+#include <plat/adc-core.h>
 #include <plat/iic-core.h>
-#include <plat/adc.h>
 #include <plat/onenand-core.h>
 #include <mach/s3c6400.h>
 #include <mach/s3c6410.h>
@@ -54,10 +55,11 @@ void __init s3c6410_map_io(void)
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 
-	s3c_device_adc.name	= "s3c64xx-adc";
+	s3c_adc_setname("s3c64xx-adc");
 	s3c_device_nand.name = "s3c6400-nand";
 	s3c_onenand_setname("s3c6410-onenand");
 	s3c64xx_onenand1_setname("s3c6410-onenand");
+	s3c_cfcon_setname("s3c64xx-pata");
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 8e28e44..0007368 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <mach/regs-fb.h>
-#include <mach/gpio.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index d1b11e6..406192a 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 2dce57d..1ee62c9 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
new file mode 100644
index 0000000..c12c315
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s3c64xx/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C64XX setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_ide_setup_gpio(void)
+{
+	u32 reg;
+	u32 gpio = 0;
+
+	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+	/* Independent CF interface, CF chip select configuration */
+	writel(reg | MEM_SYS_CFG_INDEP_CF |
+		MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
+	for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+
+	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+	for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+
+	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+	for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+}
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
new file mode 100644
index 0000000..abc34e4
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -0,0 +1,34 @@
+/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * GPIO configuration for S3C64XX KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
+	end = S3C64XX_GPK(8 + rows);
+	for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
+	end = S3C64XX_GPL(0 + cols);
+	for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index a58c0cc..3223595 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -16,12 +16,14 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
-#include <mach/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
 
 void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 	unsigned int end;
 
@@ -33,12 +35,15 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
 	}
 
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+	}
 }
 
 void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 	unsigned int end;
 
@@ -50,8 +55,10 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
 	}
 
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+	}
 }
 
 void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
index f066fae..6a4af7f 100644
--- a/arch/arm/mach-s5p6440/Kconfig
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -13,13 +13,20 @@ config CPU_S5P6440
 	help
 	  Enable S5P6440 CPU support
 
+config S5P6440_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
-	select SAMSUNG_DEV_TS
-	select SAMSUNG_DEV_ADC
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
 	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P6440_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6440
 
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
index be3c53a..c3fe4d3 100644
--- a/arch/arm/mach-s5p6440/Makefile
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
 # device support
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_S5P6440_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
index b2fe6a5..526f33a 100644
--- a/arch/arm/mach-s5p6440/cpu.c
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -37,6 +37,7 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/s5p6440.h>
+#include <plat/adc-core.h>
 
 static void s5p6440_idle(void)
 {
@@ -61,7 +62,7 @@ static void s5p6440_idle(void)
 void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
-	s3c_device_adc.name	= "s3c64xx-adc";
+	s3c_adc_setname("s3c64xx-adc");
 }
 
 void __init s5p6440_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
index 0c53679..3ca0d2b 100644
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ b/arch/arm/mach-s5p6440/dev-audio.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c
index 0a30280..510af44 100644
--- a/arch/arm/mach-s5p6440/dev-spi.c
+++ b/arch/arm/mach-s5p6440/dev-spi.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
index 92efc05..8bf6e0c 100644
--- a/arch/arm/mach-s5p6440/gpio.c
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -13,9 +13,11 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <mach/map.h>
-#include <mach/gpio.h>
 #include <mach/regs-gpio.h>
+
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
index 911854d9..16a7612 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -51,7 +51,7 @@
 #define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
 #define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
 #define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
-#define IRQ_PMUIRQ		S5P_IRQ_VIC1(23)
+#define IRQ_PMU			S5P_IRQ_VIC1(23)
 #define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
 #define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
 #define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
index 44011b9..6cc5cbc 100644
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -38,7 +38,6 @@
 #define S5P_PA_TIMER		S5P6440_PA_TIMER
 
 #define S5P6440_PA_RTC		(0xEA100000)
-#define S5P_PA_RTC		S5P6440_PA_RTC
 
 #define S5P6440_PA_WDT		(0xEA200000)
 #define S5P_PA_WDT		S5P6440_PA_WDT
@@ -53,6 +52,7 @@
 #define S5P_SZ_UART		SZ_256
 
 #define S5P6440_PA_IIC0		(0xEC104000)
+#define S5P6440_PA_IIC1		(0xEC20F000)
 
 #define S5P6440_PA_SPI0		0xEC400000
 #define S5P6440_PA_SPI1		0xEC500000
@@ -77,6 +77,8 @@
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5P6440_PA_UART
 #define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_RTC		S5P6440_PA_RTC
+#define S3C_PA_IIC1		S5P6440_PA_IIC1
 #define S3C_PA_WDT		S5P6440_PA_WDT
 
 #define SAMSUNG_PA_ADC		S5P6440_PA_ADC
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h
index d2dd817..a359ee3 100644
--- a/arch/arm/mach-s5p6440/include/mach/system.h
+++ b/arch/arm/mach-s5p6440/include/mach/system.h
@@ -13,12 +13,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
+#include <plat/system-reset.h>
 
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
index 8291fec..9202aaa 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -15,6 +15,7 @@
 #include <linux/timer.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -37,20 +38,21 @@
 #include <mach/regs-clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/iic.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
 
-#define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
+#define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
 				S3C2410_UCON_TXIRQMODE |	\
 				S3C2410_UCON_RXIRQMODE |	\
 				S3C2410_UCON_RXFIFO_TOI |	\
 				S3C2443_UCON_RXERR_IRQEN)
 
-#define S5P6440_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDK6440_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5P6440_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |	\
+#define SMDK6440_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				S3C2440_UFCON_TXTRIG16 |	\
 				S3C2410_UFCON_RXTRIG8)
 
@@ -58,40 +60,51 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
+		.ucon	     = SMDK6440_UCON_DEFAULT,
+		.ulcon	     = SMDK6440_ULCON_DEFAULT,
+		.ufcon	     = SMDK6440_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
+		.ucon	     = SMDK6440_UCON_DEFAULT,
+		.ulcon	     = SMDK6440_ULCON_DEFAULT,
+		.ufcon	     = SMDK6440_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
+		.ucon	     = SMDK6440_UCON_DEFAULT,
+		.ulcon	     = SMDK6440_ULCON_DEFAULT,
+		.ufcon	     = SMDK6440_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport	     = 3,
 		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
+		.ucon	     = SMDK6440_UCON_DEFAULT,
+		.ulcon	     = SMDK6440_ULCON_DEFAULT,
+		.ufcon	     = SMDK6440_UFCON_DEFAULT,
 	},
 };
 
 static struct platform_device *smdk6440_devices[] __initdata = {
 	&s5p6440_device_iis,
 	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
+	/* To be populated */
+};
+
 static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
@@ -109,6 +122,14 @@ static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
+	/* I2C */
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(0, smdk6440_i2c_devs0,
+			ARRAY_SIZE(smdk6440_i2c_devs0));
+	i2c_register_board_info(1, smdk6440_i2c_devs1,
+			ARRAY_SIZE(smdk6440_i2c_devs1));
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
index 69e8a66..2c99d14 100644
--- a/arch/arm/mach-s5p6440/setup-i2c0.c
+++ b/arch/arm/mach-s5p6440/setup-i2c0.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Will be populated later */
+	s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p6440/setup-i2c1.c
new file mode 100644
index 0000000..9a1537f
--- /dev/null
+++ b/arch/arm/mach-s5p6440/setup-i2c1.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5p6440/setup-i2c1.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
+	s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
+	s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
index 0fd41b4..0fda0a5 100644
--- a/arch/arm/mach-s5p6442/Kconfig
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -19,6 +19,7 @@ config CPU_S5P6442
 config MACH_SMDK6442
 	bool "SMDK6442"
 	select CPU_S5P6442
+	select S3C_DEV_WDT
 	help
 	  Machine support for Samsung SMDK6442
 
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
index 087e57f..dcd20f1 100644
--- a/arch/arm/mach-s5p6442/clock.c
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -361,6 +361,12 @@ static struct clk init_clocks[] = {
 		.enable		= s5p6442_clk_ip3_ctrl,
 		.ctrlbit	= (1<<19),
 	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
 		.name		= "timers",
 		.id		= -1,
 		.parent		= &clk_pclkd1,
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
index cb801e1..7a4e347 100644
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
index 3019952..e894651 100644
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ b/arch/arm/mach-s5p6442/dev-spi.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
index 02c2374..3fbc6c3 100644
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -32,7 +32,7 @@
 #define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
 
 /* VIC1 */
-#define IRQ_nPMUIRQ 		S5P_IRQ_VIC1(0)
+#define IRQ_PMU			S5P_IRQ_VIC1(0)
 #define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
 #define IRQ_UART0 		S5P_IRQ_VIC1(10)
 #define IRQ_UART1 		S5P_IRQ_VIC1(11)
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 32ca424..281d256 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -42,6 +42,8 @@
 
 #define S5P6442_PA_SYSTIMER   	(0xEA100000)
 
+#define S5P6442_PA_WATCHDOG	(0xEA200000)
+
 #define S5P6442_PA_UART		(0xEC000000)
 
 #define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
@@ -65,6 +67,7 @@
 #define S5P6442_PA_PCM1		0xF2500000
 
 /* compatibiltiy defines. */
+#define S3C_PA_WDT		S5P6442_PA_WATCHDOG
 #define S3C_PA_UART		S5P6442_PA_UART
 #define S3C_PA_IIC		S5P6442_PA_IIC0
 
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
index 8bcd8ed..c30c1cc 100644
--- a/arch/arm/mach-s5p6442/include/mach/system.h
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -13,12 +13,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
+#include <plat/system-reset.h>
 
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
index ebcf997..8d8d042 100644
--- a/arch/arm/mach-s5p6442/mach-smdk6442.c
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -27,16 +27,16 @@
 #include <plat/cpu.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5P6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDK6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5P6442_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDK6442_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5P6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDK6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)
 
@@ -44,28 +44,29 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5P6442_UCON_DEFAULT,
-		.ulcon		= S5P6442_ULCON_DEFAULT,
-		.ufcon		= S5P6442_UFCON_DEFAULT,
+		.ucon		= SMDK6442_UCON_DEFAULT,
+		.ulcon		= SMDK6442_ULCON_DEFAULT,
+		.ufcon		= SMDK6442_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5P6442_UCON_DEFAULT,
-		.ulcon		= S5P6442_ULCON_DEFAULT,
-		.ufcon		= S5P6442_UFCON_DEFAULT,
+		.ucon		= SMDK6442_UCON_DEFAULT,
+		.ulcon		= SMDK6442_ULCON_DEFAULT,
+		.ufcon		= SMDK6442_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5P6442_UCON_DEFAULT,
-		.ulcon		= S5P6442_ULCON_DEFAULT,
-		.ufcon		= S5P6442_UFCON_DEFAULT,
+		.ucon		= SMDK6442_UCON_DEFAULT,
+		.ulcon		= SMDK6442_ULCON_DEFAULT,
+		.ufcon		= SMDK6442_UFCON_DEFAULT,
 	},
 };
 
 static struct platform_device *smdk6442_devices[] __initdata = {
 	&s5p6442_device_iis0,
+	&s3c_device_wdt,
 };
 
 static void __init smdk6442_map_io(void)
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b2a11df..77ae4bf 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -25,6 +25,16 @@ config S5PC100_SETUP_I2C1
 	help
 	  Common setup code for i2c bus 1.
 
+config S5PC100_SETUP_IDE
+	bool
+	help
+	  Common setup code for S5PC100 IDE GPIO configurations
+
+config S5PC100_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for KEYPAD GPIO configurations.
+
 config S5PC100_SETUP_SDHCI
 	bool
 	select S5PC100_SETUP_SDHCI_GPIO
@@ -40,13 +50,24 @@ config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
 	select S3C_DEV_FB
-	select S3C_DEV_I2C1
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_TS
 	select S5PC100_SETUP_FB_24BPP
 	select S5PC100_SETUP_I2C1
+	select S5PC100_SETUP_IDE
+	select S5PC100_SETUP_KEYPAD
 	select S5PC100_SETUP_SDHCI
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
 	help
 	  Machine support for the Samsung SMDKC100
 
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index 543f3de..a021ed1 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -19,6 +19,8 @@ obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 
 obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index e3fed4c..084abd1 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -737,7 +737,7 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
-		.name		= "keyif",
+		.name		= "keypad",
 		.id		= -1,
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_5_ctrl,
@@ -1078,7 +1078,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 0,
 			.ctrlbit	= (1 << 12),
 			.enable		= s5pc100_sclk1_ctrl,
@@ -1089,7 +1089,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 1,
 			.ctrlbit	= (1 << 13),
 			.enable		= s5pc100_sclk1_ctrl,
@@ -1100,7 +1100,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 2,
 			.ctrlbit	= (1 << 14),
 			.enable		= s5pc100_sclk1_ctrl,
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 7b5bdbc..799d22f 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -38,8 +38,10 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/ata-core.h>
 #include <plat/iic-core.h>
 #include <plat/sdhci.h>
+#include <plat/adc-core.h>
 #include <plat/onenand-core.h>
 
 #include <plat/s5pc100.h>
@@ -87,11 +89,14 @@ void __init s5pc100_map_io(void)
 	s5pc100_default_sdhci1();
 	s5pc100_default_sdhci2();
 
+	s3c_adc_setname("s3c64xx-adc");
+
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 
 	s3c_onenand_setname("s5pc100-onenand");
+	s3c_cfcon_setname("s5pc100-pata");
 }
 
 void __init s5pc100_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 18cfe9a..a699ed6a 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
index 14618c3..a0ef7c3 100644
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -10,10 +10,10 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 28aa551..06513e6 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -29,7 +29,7 @@
 #define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
 
 /* VIC1: ARM, power, memory, connectivity */
-#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_PMU			S5P_IRQ_VIC1(0)
 #define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
 #define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
 #define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
@@ -38,7 +38,7 @@
 #define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
 #define IRQ_ONENAND		S5P_IRQ_VIC1(7)
 #define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_CFCON		S5P_IRQ_VIC1(9)
 #define IRQ_UART0		S5P_IRQ_VIC1(10)
 #define IRQ_UART1		S5P_IRQ_VIC1(11)
 #define IRQ_UART2		S5P_IRQ_VIC1(12)
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index cadae43..01b9134 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -61,6 +61,8 @@
 
 #define S5PC100_PA_ONENAND	(0xE7100000)
 
+#define S5PC100_PA_CFCON	(0xE7800000)
+
 /* DMA */
 #define S5PC100_PA_MDMA		(0xE8100000)
 #define S5PC100_PA_PDMA0	(0xE9000000)
@@ -72,6 +74,9 @@
 
 #define S5PC100_PA_SYSTIMER	(0xEA100000)
 
+#define S5PC100_PA_WATCHDOG	(0xEA200000)
+#define S5PC100_PA_RTC		(0xEA300000)
+
 #define S5PC100_PA_UART		(0xEC000000)
 
 #define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
@@ -94,6 +99,10 @@
 
 #define S5PC100_PA_FB		(0xEE000000)
 
+#define S5PC100_PA_FIMC0	(0xEE200000)
+#define S5PC100_PA_FIMC1	(0xEE300000)
+#define S5PC100_PA_FIMC2	(0xEE400000)
+
 #define S5PC100_PA_I2S0		(0xF2000000)
 #define S5PC100_PA_I2S1		(0xF2100000)
 #define S5PC100_PA_I2S2		(0xF2200000)
@@ -104,6 +113,8 @@
 #define S5PC100_PA_PCM0		0xF2400000
 #define S5PC100_PA_PCM1		0xF2500000
 
+#define S5PC100_PA_TSADC	(0xF3000000)
+
 /* KEYPAD */
 #define S5PC100_PA_KEYPAD	(0xF3100000)
 
@@ -130,9 +141,19 @@
 #define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
 #define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
 #define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_WDT		S5PC100_PA_WATCHDOG
 #define S3C_PA_TSADC		S5PC100_PA_TSADC
 #define S3C_PA_ONENAND		S5PC100_PA_ONENAND
 #define S3C_PA_ONENAND_BUF	S5PC100_PA_ONENAND_BUF
 #define S3C_SZ_ONENAND_BUF	S5PC100_SZ_ONENAND_BUF
+#define S3C_PA_RTC		S5PC100_PA_RTC
+
+#define SAMSUNG_PA_ADC		S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON	S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S5PC100_PA_KEYPAD
+
+#define S5P_PA_FIMC0		S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1		S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2		S5PC100_PA_FIMC2
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
index 5d27d28..bc92da2 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -71,7 +71,10 @@
 #define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
 
 #define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
+#define S5PC100_MEM_SYS_CFG	S5PC100_REG_OTHERS(0x200)
 
 #define S5PC100_SWRESET_RESETVAL	0xc100
 
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
+
 #endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index 681f626..a9ea57c 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,18 +11,11 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include <plat/system-reset.h>
 
 static void arch_idle(void)
 {
 	/* nothing here yet */
 }
 
-static void arch_reset(char mode, const char *cmd)
-{
-	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
-	return;
-}
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index af22f82..2dc519c 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
+#include <linux/input.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,18 +43,22 @@
 #include <plat/s5pc100.h>
 #include <plat/fb.h>
 #include <plat/iic.h>
+#include <plat/ata.h>
+#include <plat/adc.h>
+#include <plat/keypad.h>
+#include <plat/ts.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PC100_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDKC100_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDKC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S3C2440_UFCON_RXTRIG8 |	\
 				 S3C2440_UFCON_TXTRIG16)
 
@@ -61,30 +66,30 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport	     = 3,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 };
 
@@ -149,16 +154,54 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
 	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
 };
 
+static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
+	.setup_gpio	= s5pc100_ide_setup_gpio,
+};
+
+static uint32_t smdkc100_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
+	.keymap		= smdkc100_keymap,
+	.keymap_size	= ARRAY_SIZE(smdkc100_keymap),
+};
+
+static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
+	.keymap_data	= &smdkc100_keymap_data,
+	.rows		= 2,
+	.cols		= 8,
+};
+
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_cfcon,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
+	&s3c_device_ts,
+	&s3c_device_wdt,
 	&smdkc100_lcd_powerdev,
 	&s5pc100_device_iis0,
+	&samsung_device_keypad,
 	&s5pc100_device_ac97,
+	&s3c_device_rtc,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init smdkc100_map_io(void)
@@ -170,6 +213,8 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	/* I2C */
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
@@ -177,6 +222,9 @@ static void __init smdkc100_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+	s3c_ide_set_platdata(&smdkc100_ide_pdata);
+
+	samsung_keypad_set_platdata(&smdkc100_keypad_data);
 
 	/* LCD init */
 	gpio_request(S5PC100_GPD(0), "GPD");
diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c
new file mode 100644
index 0000000..8357567
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-ide.c
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s5pc100/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PC100 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s5pc100_ide_setup_gpio(void)
+{
+	u32 reg;
+	u32 gpio = 0;
+
+	/* Independent CF interface, CF chip select configuration */
+	reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
+	writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
+
+	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+	for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/*CF_Data[0 - 7] */
+	for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/* CF_Data[8 - 15] */
+	for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+	for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/* EBI_OE, EBI_WE */
+	for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++)
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0));
+
+	/* CF_OE, CF_WE */
+	for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* CF_CD */
+	s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
+}
diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c
new file mode 100644
index 0000000..d0837a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-keypad.c
@@ -0,0 +1,34 @@
+/* linux/arch/arm/mach-s5pc100/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * GPIO configuration for S5PC100 KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+	end = S5PC100_GPH3(rows);
+	for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+	end = S5PC100_GPH2(cols);
+	for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 7769c76..dc7208c 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -20,9 +20,11 @@
 
 #include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
 
 void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 	unsigned int end;
 	unsigned int num;
@@ -47,12 +49,15 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 		}
 	}
 
-	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 	unsigned int end;
 
@@ -64,12 +69,15 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
 	}
 
-	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 	unsigned int end;
 
@@ -81,6 +89,8 @@ void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
 	}
 
-	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+	}
 }
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index ea7ff19..f16946e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -26,10 +26,10 @@
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
 char *s5pc100_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	/* [2] = "mmc_bus", not yet successfully used yet */
-	/* [3] = "48m", - note not successfully used yet */
+	[0] = "hsmmc",		/* HCLK */
+	/* [1] = "hsmmc",	- duplicate HCLK entry */
+	[2] = "sclk_mmc",	/* mmc_bus */
+	/* [3] = "48m",		- note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0761eac..d3a3895 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -27,11 +27,21 @@ config S5PV210_SETUP_I2C2
 	help
 	  Common setup code for i2c bus 2.
 
+config S5PV210_SETUP_IDE
+	bool
+	help
+	  Common setup code for S5PV210 IDE GPIO configurations
+
 config S5PV210_SETUP_FB_24BPP
 	bool
 	help
           Common setup code for S5PV210 with an 24bpp RGB display helper.
 
+config S5PV210_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for keypad.
+
 config S5PV210_SETUP_SDHCI
         bool
         select S5PV210_SETUP_SDHCI_GPIO
@@ -43,14 +53,27 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
-# machine support
+config S5PC110_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
+
+menu "S5PC110 Machines"
 
 config MACH_AQUILA
-	bool "Samsung Aquila"
+	bool "Aquila"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
-	select S5PV210_SETUP_FB_24BPP
 	select S3C_DEV_FB
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC110_DEV_ONENAND
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
@@ -58,34 +81,64 @@ config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_FB
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC110_DEV_ONENAND
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
 
-config S5PC110_DEV_ONENAND
-	bool
+config MACH_SMDKC110
+	bool "SMDKC110"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_IDE
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
 	help
-	  Compile in platform device definition for OneNAND1 controller
+	  Machine support for Samsung SMDKC110
+	  S5PC110(MCP) is one of package option of S5PV210
+
+endmenu
+
+menu "S5PV210 Machines"
 
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
 	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_TS
-	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
+	select S5PV210_SETUP_KEYPAD
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for Samsung SMDKV210
 
-config MACH_SMDKC110
-	bool "SMDKC110"
-	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
-	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
-	help
-	  Machine support for Samsung SMDKC110
-	  S5PC110(MCP) is one of package option of S5PV210
+endmenu
 
 endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 30be9a6..05048c5 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -31,5 +31,7 @@ obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
 obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 411a4a9..c7e0b8a 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -32,8 +32,13 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/s5pv210.h>
+#include <plat/adc-core.h>
+#include <plat/ata-core.h>
+#include <plat/fimc-core.h>
 #include <plat/iic-core.h>
+#include <plat/keypad-core.h>
 #include <plat/sdhci.h>
+#include <plat/reset.h>
 
 /* Initial IO mappings */
 
@@ -69,6 +74,11 @@ static void s5pv210_idle(void)
 	local_irq_enable();
 }
 
+static void s5pv210_sw_reset(void)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
 /* s5pv210_map_io
  *
  * register the standard cpu IO areas
@@ -76,21 +86,29 @@ static void s5pv210_idle(void)
 
 void __init s5pv210_map_io(void)
 {
-#ifdef CONFIG_S3C_DEV_ADC
-	s3c_device_adc.name	= "s3c64xx-adc";
-#endif
-
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
 
 	/* initialise device information early */
 	s5pv210_default_sdhci0();
 	s5pv210_default_sdhci1();
 	s5pv210_default_sdhci2();
+	s5pv210_default_sdhci3();
+
+	s3c_adc_setname("s3c64xx-adc");
+
+	s3c_cfcon_setname("s5pv210-pata");
+
+	s3c_fimc_setname(0, "s5pv210-fimc");
+	s3c_fimc_setname(1, "s5pv210-fimc");
+	s3c_fimc_setname(2, "s5pv210-fimc");
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 	s3c_i2c2_setname("s3c2440-i2c");
+
+	/* Use s5pv210-keypad instead of samsung-keypad */
+	samsung_keypad_setname("s5pv210-keypad");
 }
 
 void __init s5pv210_init_clocks(int xtal)
@@ -138,5 +156,8 @@ int __init s5pv210_init(void)
 	/* set idle function */
 	pm_idle = s5pv210_idle;
 
+	/* set sw_reset function */
+	s5p_reset_hook = s5pv210_sw_reset;
+
 	return sysdev_register(&s5pv210_sysdev);
 }
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 6e21533..21dc6cf 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/mach-s5pv210/dev-onenand.c
index 34997b7..f8ede33 100644
--- a/arch/arm/mach-s5pv210/dev-onenand.c
+++ b/arch/arm/mach-s5pv210/dev-onenand.c
@@ -27,9 +27,14 @@ static struct resource s5pc110_onenand_resources[] = {
 	},
 	[1] = {
 		.start	= S5PC110_PA_ONENAND_DMA,
-		.end	= S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
+		.end	= S5PC110_PA_ONENAND_DMA + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
+	[2] = {
+		.start	= IRQ_ONENAND_AUDI,
+		.end	= IRQ_ONENAND_AUDI,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 struct platform_device s5pc110_device_onenand = {
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
index 337a62b..826cdbc 100644
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
index 9ea8972..0d45911 100644
--- a/arch/arm/mach-s5pv210/gpiolib.c
+++ b/arch/arm/mach-s5pv210/gpiolib.c
@@ -207,6 +207,20 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
 			.label	= "MP03",
 		},
 	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
+	}, {
 		.base	= (S5P_VA_GPIO + 0xC00),
 		.config	= &gpio_cfg_noint,
 		.chip	= {
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index d6461ba..1f4b595 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -52,6 +52,8 @@
 #define S5PV210_GPIO_MP01_NR	(8)
 #define S5PV210_GPIO_MP02_NR	(4)
 #define S5PV210_GPIO_MP03_NR	(8)
+#define S5PV210_GPIO_MP04_NR	(8)
+#define S5PV210_GPIO_MP05_NR	(8)
 
 /* GPIO bank numbers */
 
@@ -94,6 +96,8 @@ enum s5p_gpio_number {
 	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
 	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
 	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+	S5PV210_GPIO_MP04_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
+	S5PV210_GPIO_MP05_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
 };
 
 /* S5PV210 GPIO number definitions */
@@ -127,13 +131,15 @@ enum s5p_gpio_number {
 #define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
 #define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
 #define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
+#define S5PV210_MP04(_nr)	(S5PV210_GPIO_MP04_START + (_nr))
+#define S5PV210_MP05(_nr)	(S5PV210_GPIO_MP05_START + (_nr))
 
 /* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END	(S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S5PV210_GPIO_END	(S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
 #define S3C_GPIO_END		S5PV210_GPIO_END
 
-/* define the number of gpios we need to the one after the MP03() range */
-#define ARCH_NR_GPIOS		(S5PV210_MP03(S5PV210_GPIO_MP03_NR) +	\
+/* define the number of gpios we need to the one after the MP05() range */
+#define ARCH_NR_GPIOS		(S5PV210_MP05(S5PV210_GPIO_MP05_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 9689537..e1c020e 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -36,7 +36,7 @@
 
 /* VIC1: ARM, Power, Memory, Connectivity, Storage */
 
-#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_PMU			S5P_IRQ_VIC1(0)
 #define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
 #define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
 #define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
@@ -45,7 +45,7 @@
 #define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
 #define IRQ_ONENAND		S5P_IRQ_VIC1(7)
 #define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_CFCON		S5P_IRQ_VIC1(9)
 #define IRQ_UART0		S5P_IRQ_VIC1(10)
 #define IRQ_UART1		S5P_IRQ_VIC1(11)
 #define IRQ_UART2		S5P_IRQ_VIC1(12)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 34eb168..dd4fb6b 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -32,6 +32,8 @@
 #define S5PV210_PA_SPI0		0xE1300000
 #define S5PV210_PA_SPI1		0xE1400000
 
+#define S5PV210_PA_KEYPAD	(0xE1600000)
+
 #define S5PV210_PA_IIC0		(0xE1800000)
 #define S5PV210_PA_IIC1		(0xFAB00000)
 #define S5PV210_PA_IIC2		(0xE1A00000)
@@ -43,6 +45,7 @@
 
 #define S5PV210_PA_WATCHDOG	(0xE2700000)
 
+#define S5PV210_PA_RTC		(0xE2800000)
 #define S5PV210_PA_UART		(0xE2900000)
 
 #define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
@@ -54,12 +57,18 @@
 
 #define S5PV210_PA_SROMC	(0xE8000000)
 
+#define S5PV210_PA_CFCON	(0xE8200000)
+
 #define S5PV210_PA_MDMA		0xFA200000
 #define S5PV210_PA_PDMA0	0xE0900000
 #define S5PV210_PA_PDMA1	0xE0A00000
 
 #define S5PV210_PA_FB		(0xF8000000)
 
+#define S5PV210_PA_FIMC0	(0xFB200000)
+#define S5PV210_PA_FIMC1	(0xFB300000)
+#define S5PV210_PA_FIMC2	(0xFB400000)
+
 #define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
 
 #define S5PV210_PA_VIC0		(0xF2000000)
@@ -97,12 +106,19 @@
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
 #define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
 #define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3		S5PV210_PA_HSMMC(3)
 #define S3C_PA_IIC		S5PV210_PA_IIC0
 #define S3C_PA_IIC1		S5PV210_PA_IIC1
 #define S3C_PA_IIC2		S5PV210_PA_IIC2
 #define S3C_PA_FB		S5PV210_PA_FB
+#define S3C_PA_RTC		S5PV210_PA_RTC
 #define S3C_PA_WDT		S5PV210_PA_WATCHDOG
+#define S5P_PA_FIMC0		S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1		S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2		S5PV210_PA_FIMC2
 
 #define SAMSUNG_PA_ADC		S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S5PV210_PA_KEYPAD
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 379117e..d503e0c 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -16,8 +16,13 @@
 #define PHYS_OFFSET		UL(0x20000000)
 #define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
 
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS	32
+/*
+ * Sparsemem support
+ * Physical memory can be located from 0x20000000 to 0x7fffffff,
+ * so MAX_PHYSMEM_BITS is 31.
+ */
+
+#define MAX_PHYSMEM_BITS	31
 #define SECTION_SIZE_BITS	28
 
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 2a25ab40..499aef7 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -90,6 +90,8 @@
 #define S5P_CLKDIV0_PCLK66_SHIFT	(28)
 #define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
 
+#define S5P_SWRESET		S5P_CLKREG(0x2000)
+
 /* Registers related to power management */
 #define S5P_PWR_CFG		S5P_CLKREG(0xC000)
 #define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
index 1ca04d5..af8a200 100644
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -13,12 +13,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
+#include <plat/system-reset.h>
 
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 10bc76e..e412664 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -13,6 +13,12 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -23,54 +29,63 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-fb.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
+#include <plat/fimc-core.h>
+#include <plat/sdhci.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define AQUILA_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define AQUILA_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
+#define AQUILA_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
 
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		/*
+		 * Actually UART0 can support 256 bytes fifo, but aquila board
+		 * supports 128 bytes fifo because of initial chip bug
+		 */
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 };
 
@@ -116,19 +131,383 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data aquila_ldo2_data = {
+	.constraints	= {
+		.name		= "VALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data aquila_ldo3_data = {
+	.constraints	= {
+		.name		= "VUSB/MIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo4_data = {
+	.constraints	= {
+		.name		= "VDAC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo5_data = {
+	.constraints	= {
+		.name		= "VTF_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo6_data = {
+	.constraints	= {
+		.name		= "VCC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo7_data = {
+	.constraints	= {
+		.name		= "VCC_3.0V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo8_data = {
+	.constraints	= {
+		.name		= "VUSB/VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo9_data = {
+	.constraints	= {
+		.name		= "VCC/VCAM_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo10_data = {
+	.constraints	= {
+		.name		= "VPLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo11_data = {
+	.constraints	= {
+		.name		= "CAM_IO_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo12_data = {
+	.constraints	= {
+		.name		= "CAM_ISP_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo13_data = {
+	.constraints	= {
+		.name		= "CAM_A_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo14_data = {
+	.constraints	= {
+		.name		= "CAM_CIF_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo15_data = {
+	.constraints	= {
+		.name		= "CAM_AF_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo16_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo17_data = {
+	.constraints	= {
+		.name		= "CAM_8M_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+	{	.supply	= "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+	{	.supply	= "vddint", },
+};
+
+static struct regulator_init_data aquila_buck1_data = {
+	.constraints	= {
+		.name		= "VARM_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data aquila_buck2_data = {
+	.constraints	= {
+		.name		= "VINT_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data aquila_buck3_data = {
+	.constraints	= {
+		.name		= "VCC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data aquila_buck4_data = {
+	.constraints	= {
+		.name		= "CAM_CORE_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct max8998_regulator_data aquila_regulators[] = {
+	{ MAX8998_LDO2,  &aquila_ldo2_data },
+	{ MAX8998_LDO3,  &aquila_ldo3_data },
+	{ MAX8998_LDO4,  &aquila_ldo4_data },
+	{ MAX8998_LDO5,  &aquila_ldo5_data },
+	{ MAX8998_LDO6,  &aquila_ldo6_data },
+	{ MAX8998_LDO7,  &aquila_ldo7_data },
+	{ MAX8998_LDO8,  &aquila_ldo8_data },
+	{ MAX8998_LDO9,  &aquila_ldo9_data },
+	{ MAX8998_LDO10, &aquila_ldo10_data },
+	{ MAX8998_LDO11, &aquila_ldo11_data },
+	{ MAX8998_LDO12, &aquila_ldo12_data },
+	{ MAX8998_LDO13, &aquila_ldo13_data },
+	{ MAX8998_LDO14, &aquila_ldo14_data },
+	{ MAX8998_LDO15, &aquila_ldo15_data },
+	{ MAX8998_LDO16, &aquila_ldo16_data },
+	{ MAX8998_LDO17, &aquila_ldo17_data },
+	{ MAX8998_BUCK1, &aquila_buck1_data },
+	{ MAX8998_BUCK2, &aquila_buck2_data },
+	{ MAX8998_BUCK3, &aquila_buck3_data },
+	{ MAX8998_BUCK4, &aquila_buck4_data },
+};
+
+static struct max8998_platform_data aquila_max8998_pdata = {
+	.num_regulators	= ARRAY_SIZE(aquila_regulators),
+	.regulators	= aquila_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4	4
+static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
+	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
+	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
+};
+
+static struct platform_device aquila_i2c_gpio_pmic = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_PMIC_BUS_4,
+	.dev		= {
+		.platform_data = &aquila_i2c_gpio_pmic_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+	{
+		/* 0xCC when SRAD = 0 */
+		I2C_BOARD_INFO("max8998", 0xCC >> 1),
+		.platform_data = &aquila_max8998_pdata,
+	},
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button aquila_gpio_keys_table[] = {
+	{
+		.code 		= KEY_POWER,
+		.gpio		= S5PV210_GPH2(6),
+		.desc		= "gpio-keys: KEY_POWER",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+		.debounce_interval = 1,
+	},
+};
+
+static struct gpio_keys_platform_data aquila_gpio_keys_data = {
+	.buttons	= aquila_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(aquila_gpio_keys_table),
+};
+
+static struct platform_device aquila_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &aquila_gpio_keys_data,
+	},
+};
+
+static void __init aquila_pmic_init(void)
+{
+	/* AP_PMIC_IRQ: EINT7 */
+	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+	/* nPower: EINT22 */
+	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	/* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define AQUILA_EXT_FLASH_EN	S5PV210_MP05(4)
+#define AQUILA_EXT_FLASH_CD	S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= AQUILA_EXT_FLASH_CD,
+	.ext_cd_gpio_invert	= 1,
+};
+
+static void aquila_setup_sdhci(void)
+{
+	gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
+	gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+
+	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
+	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
+	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
+};
+
 static struct platform_device *aquila_devices[] __initdata = {
+	&aquila_i2c_gpio_pmic,
+	&aquila_device_gpiokeys,
 	&s3c_device_fb,
+	&s5pc110_device_onenand,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
 };
 
 static void __init aquila_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+	s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
 }
 
 static void __init aquila_machine_init(void)
 {
+	/* PMIC */
+	aquila_pmic_init();
+	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+			ARRAY_SIZE(i2c_gpio_pmic_devs));
+	/* SDHCI */
+	aquila_setup_sdhci();
+
+	s3c_fimc_setname(0, "s5p-fimc");
+	s3c_fimc_setname(1, "s5p-fimc");
+	s3c_fimc_setname(2, "s5p-fimc");
+
 	/* FB */
 	s3c_fb_set_platdata(&aquila_lcd_pdata);
 
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 4863b13..53754d7 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -12,6 +12,13 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -20,58 +27,444 @@
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define GONI_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
+#define GONI_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
 
 static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win goni_fb_win0 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 3,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 2,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
+	.win[0]		= &goni_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data goni_ldo2_data = {
+	.constraints	= {
+		.name		= "VALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data goni_ldo3_data = {
+	.constraints	= {
+		.name		= "VUSB/MIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo4_data = {
+	.constraints	= {
+		.name		= "VDAC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo5_data = {
+	.constraints	= {
+		.name		= "VTF_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo6_data = {
+	.constraints	= {
+		.name		= "VCC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo7_data = {
+	.constraints	= {
+		.name		= "VLCD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo8_data = {
+	.constraints	= {
+		.name		= "VUSB/VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo9_data = {
+	.constraints	= {
+		.name		= "VCC/VCAM_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo10_data = {
+	.constraints	= {
+		.name		= "VPLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo11_data = {
+	.constraints	= {
+		.name		= "CAM_IO_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo12_data = {
+	.constraints	= {
+		.name		= "CAM_ISP_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo13_data = {
+	.constraints	= {
+		.name		= "CAM_A_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo14_data = {
+	.constraints	= {
+		.name		= "CAM_CIF_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo15_data = {
+	.constraints	= {
+		.name		= "CAM_AF_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo16_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo17_data = {
+	.constraints	= {
+		.name		= "VCC_3.0V_LCD",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+	{	.supply	= "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+	{	.supply	= "vddint", },
+};
+
+static struct regulator_init_data goni_buck1_data = {
+	.constraints	= {
+		.name		= "VARM_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data goni_buck2_data = {
+	.constraints	= {
+		.name		= "VINT_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data goni_buck3_data = {
+	.constraints	= {
+		.name		= "VCC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data goni_buck4_data = {
+	.constraints	= {
+		.name		= "CAM_CORE_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct max8998_regulator_data goni_regulators[] = {
+	{ MAX8998_LDO2,  &goni_ldo2_data },
+	{ MAX8998_LDO3,  &goni_ldo3_data },
+	{ MAX8998_LDO4,  &goni_ldo4_data },
+	{ MAX8998_LDO5,  &goni_ldo5_data },
+	{ MAX8998_LDO6,  &goni_ldo6_data },
+	{ MAX8998_LDO7,  &goni_ldo7_data },
+	{ MAX8998_LDO8,  &goni_ldo8_data },
+	{ MAX8998_LDO9,  &goni_ldo9_data },
+	{ MAX8998_LDO10, &goni_ldo10_data },
+	{ MAX8998_LDO11, &goni_ldo11_data },
+	{ MAX8998_LDO12, &goni_ldo12_data },
+	{ MAX8998_LDO13, &goni_ldo13_data },
+	{ MAX8998_LDO14, &goni_ldo14_data },
+	{ MAX8998_LDO15, &goni_ldo15_data },
+	{ MAX8998_LDO16, &goni_ldo16_data },
+	{ MAX8998_LDO17, &goni_ldo17_data },
+	{ MAX8998_BUCK1, &goni_buck1_data },
+	{ MAX8998_BUCK2, &goni_buck2_data },
+	{ MAX8998_BUCK3, &goni_buck3_data },
+	{ MAX8998_BUCK4, &goni_buck4_data },
+};
+
+static struct max8998_platform_data goni_max8998_pdata = {
+	.num_regulators	= ARRAY_SIZE(goni_regulators),
+	.regulators	= goni_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4	4
+static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
+	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
+	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
+};
+
+static struct platform_device goni_i2c_gpio_pmic = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_PMIC_BUS_4,
+	.dev		= {
+		.platform_data	= &goni_i2c_gpio_pmic_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+	{
+		/* 0xCC when SRAD = 0 */
+		I2C_BOARD_INFO("max8998", 0xCC >> 1),
+		.platform_data = &goni_max8998_pdata,
+	},
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button goni_gpio_keys_table[] = {
+	{
+		.code 		= KEY_POWER,
+		.gpio		= S5PV210_GPH2(6),
+		.desc		= "gpio-keys: KEY_POWER",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+		.debounce_interval = 1,
+	},
+};
+
+static struct gpio_keys_platform_data goni_gpio_keys_data = {
+	.buttons	= goni_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(goni_gpio_keys_table),
+};
+
+static struct platform_device goni_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &goni_gpio_keys_data,
+	},
+};
+
+static void __init goni_pmic_init(void)
+{
+	/* AP_PMIC_IRQ: EINT7 */
+	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+	/* nPower: EINT22 */
+	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	/* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define GONI_EXT_FLASH_EN	S5PV210_MP05(4)
+#define GONI_EXT_FLASH_CD	S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= GONI_EXT_FLASH_CD,
+	.ext_cd_gpio_invert	= 1,
+};
+
+static void goni_setup_sdhci(void)
+{
+	gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
+	gpio_direction_output(GONI_EXT_FLASH_EN, 1);
+
+	s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
+	s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
+	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
+};
+
 static struct platform_device *goni_devices[] __initdata = {
+	&s3c_device_fb,
+	&s5pc110_device_onenand,
+	&goni_i2c_gpio_pmic,
+	&goni_device_gpiokeys,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
 };
 
 static void __init goni_map_io(void)
@@ -83,6 +476,16 @@ static void __init goni_map_io(void)
 
 static void __init goni_machine_init(void)
 {
+	/* PMIC */
+	goni_pmic_init();
+	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+			ARRAY_SIZE(i2c_gpio_pmic_devs));
+	/* SDHCI */
+	goni_setup_sdhci();
+
+	/* FB */
+	s3c_fb_set_platdata(&goni_lcd_pdata);
+
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
 }
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 4c8903c..8211bb8 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -25,18 +26,20 @@
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDKC110_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDKC110_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)
 
@@ -44,39 +47,60 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 };
 
+static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
+	.setup_gpio	= s5pv210_ide_setup_gpio,
+};
+
 static struct platform_device *smdkc110_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
+	&s3c_device_cfcon,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&s3c_device_rtc,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
 static void __init smdkc110_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -86,6 +110,18 @@ static void __init smdkc110_map_io(void)
 
 static void __init smdkc110_machine_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, smdkc110_i2c_devs0,
+			ARRAY_SIZE(smdkc110_i2c_devs0));
+	i2c_register_board_info(1, smdkc110_i2c_devs1,
+			ARRAY_SIZE(smdkc110_i2c_devs1));
+	i2c_register_board_info(2, smdkc110_i2c_devs2,
+			ARRAY_SIZE(smdkc110_i2c_devs2));
+
+	s3c_ide_set_platdata(&smdkc110_ide_pdata);
+
 	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
 }
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d46279..fbbc0a3 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
@@ -27,18 +28,21 @@
 #include <plat/cpu.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDKV210_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDKV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)
 
@@ -46,41 +50,86 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 };
 
+static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
+	.setup_gpio	= s5pv210_ide_setup_gpio,
+};
+
+static uint32_t smdkv210_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
+	.keymap		= smdkv210_keymap,
+	.keymap_size	= ARRAY_SIZE(smdkv210_keymap),
+};
+
+static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
+	.keymap_data	= &smdkv210_keymap_data,
+	.rows		= 8,
+	.cols		= 8,
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
 	&s3c_device_adc,
+	&s3c_device_cfcon,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&samsung_device_keypad,
+	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
 static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
@@ -96,7 +145,21 @@ static void __init smdkv210_map_io(void)
 
 static void __init smdkv210_machine_init(void)
 {
+	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, smdkv210_i2c_devs0,
+			ARRAY_SIZE(smdkv210_i2c_devs0));
+	i2c_register_board_info(1, smdkv210_i2c_devs1,
+			ARRAY_SIZE(smdkv210_i2c_devs1));
+	i2c_register_board_info(2, smdkv210_i2c_devs2,
+			ARRAY_SIZE(smdkv210_i2c_devs2));
+
+	s3c_ide_set_platdata(&smdkv210_ide_pdata);
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
index a50cbac..928cf1f 100644
--- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -13,9 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <mach/regs-fb.h>
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <plat/fb.h>
 #include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index c718253c..d38f7cb 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index 45e0e6e..148bb78 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index b11b4bf..2396cb8 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c
new file mode 100644
index 0000000..b558b1c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-ide.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/mach-s5pv210/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+
+void s5pv210_ide_setup_gpio(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) {
+		/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST,
+			CF_DMACK */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) {
+		/*CF_Data[0 - 7] */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) {
+		/* CF_Data[8 - 15] */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) {
+		/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+}
diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c
new file mode 100644
index 0000000..37b2790
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-keypad.c
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-s5pv210/setup-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	unsigned int gpio, end;
+
+	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+	end = S5PV210_GPH3(rows);
+	for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+	end = S5PV210_GPH2(cols);
+	for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index fe7d86d..b18587b 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -15,15 +15,17 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 
-#include <mach/gpio.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
 
 void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 
 	/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
@@ -48,12 +50,15 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 		break;
 	}
 
-	s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 
 	/* Set all the necessary GPG1[0:1] pins to special-function 2 */
@@ -68,12 +73,15 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
 	}
 
-	s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int gpio;
 
 	/* Set all the necessary GPG2[0:1] pins to special-function 2 */
@@ -99,6 +107,31 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 		break;
 	}
 
-	s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+	}
+}
+
+void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+	unsigned int gpio;
+
+	/* Set all the necessary GPG3[0:2] pins to special-function 2 */
+	for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Data pin GPG3[3:6] to special-function 2 */
+	for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
+	}
 }
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index 51815ec..c32e202 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -26,9 +26,9 @@
 
 char *s5pv210_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",		/* HCLK */
-	[1] = "hsmmc",		/* HCLK */
+	/* [1] = "hsmmc",	- duplicate HCLK entry */
 	[2] = "sclk_mmc",	/* mmc_bus */
-	/*[4] = reserved */
+	/* [3] = NULL,		- reserved */
 };
 
 void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
new file mode 100644
index 0000000..331b5bd
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -0,0 +1,45 @@
+# arch/arm/mach-s5pv310/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV310
+
+if ARCH_S5PV310
+
+config CPU_S5PV310
+	bool
+	select PLAT_S5P
+	help
+	  Enable S5PV310 CPU support
+
+config S5PV310_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S5PV310_SETUP_I2C2
+	bool
+	help
+	  Common setup code for i2c bus 2.
+
+# machine support
+
+config MACH_SMDKV310
+	bool "SMDKV310"
+	select CPU_S5PV310
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung SMDKV310
+
+config MACH_UNIVERSAL_C210
+	bool "Mobile UNIVERSAL_C210 Board"
+	select CPU_S5PV310
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung Mobile Universal S5PC210 Reference
+	  Board. S5PC210(MCP) is one of package option of S5PV310
+
+endif
diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
new file mode 100644
index 0000000..d5b51c7
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/mach-s5pv310/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PV310 system
+
+obj-$(CONFIG_CPU_S5PV310)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o
+
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV310)	+= mach-smdkv310.o
+obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
+
+# device support
+
+obj-$(CONFIG_S5PV310_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PV310_SETUP_I2C2)	+= setup-i2c2.o
diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-s5pv310/Makefile.boot
new file mode 100644
index 0000000..d65956f
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c
new file mode 100644
index 0000000..77f2b4d
--- /dev/null
+++ b/arch/arm/mach-s5pv310/clock.c
@@ -0,0 +1,544 @@
+/* linux/arch/arm/mach-s5pv310/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk clk_sclk_hdmi27m = {
+	.name		= "sclk_hdmi27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+};
+
+static struct clk *clkset_moutcore_list[] = {
+	[0] = &clk_mout_apll.clk,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_moutcore = {
+	.sources	= clkset_moutcore_list,
+	.nr_sources	= ARRAY_SIZE(clkset_moutcore_list),
+};
+
+static struct clksrc_clk clk_moutcore = {
+	.clk	= {
+		.name		= "moutcore",
+		.id		= -1,
+	},
+	.sources	= &clkset_moutcore,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_coreclk = {
+	.clk	= {
+		.name		= "core_clk",
+		.id		= -1,
+		.parent		= &clk_moutcore.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+};
+
+static struct clksrc_clk clk_aclk_corem0 = {
+	.clk	= {
+		.name		= "aclk_corem0",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cores = {
+	.clk	= {
+		.name		= "aclk_cores",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corem1 = {
+	.clk	= {
+		.name		= "aclk_corem1",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_periphclk = {
+	.clk	= {
+		.name		= "periphclk",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_atclk = {
+	.clk	= {
+		.name		= "atclk",
+		.id		= -1,
+		.parent		= &clk_moutcore.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_dbg = {
+	.clk	= {
+		.name		= "pclk_dbg",
+		.id		= -1,
+		.parent		= &clk_atclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 },
+};
+
+/* Core list of CMU_CORE side */
+
+static struct clk *clkset_corebus_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_mout_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_corebus = {
+	.sources	= clkset_corebus_list,
+	.nr_sources	= ARRAY_SIZE(clkset_corebus_list),
+};
+
+static struct clksrc_clk clk_mout_corebus = {
+	.clk	= {
+		.name		= "mout_corebus",
+		.id		= -1,
+	},
+	.sources	= &clkset_mout_corebus,
+	.reg_src	= { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_dmc = {
+	.clk	= {
+		.name		= "sclk_dmc",
+		.id		= -1,
+		.parent		= &clk_mout_corebus.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cored = {
+	.clk	= {
+		.name		= "aclk_cored",
+		.id		= -1,
+		.parent		= &clk_sclk_dmc.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corep = {
+	.clk	= {
+		.name		= "aclk_corep",
+		.id		= -1,
+		.parent		= &clk_aclk_cored.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_acp = {
+	.clk	= {
+		.name		= "aclk_acp",
+		.id		= -1,
+		.parent		= &clk_mout_corebus.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_acp = {
+	.clk	= {
+		.name		= "pclk_acp",
+		.id		= -1,
+		.parent		= &clk_aclk_acp.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+static struct clk *clkset_aclk_top_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_mout_apll.clk,
+};
+
+static struct clksrc_sources clkset_aclk_200 = {
+	.sources	= clkset_aclk_top_list,
+	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_200 = {
+	.clk	= {
+		.name		= "aclk_200",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk_200,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_sources clkset_aclk_100 = {
+	.sources	= clkset_aclk_top_list,
+	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_100 = {
+	.clk	= {
+		.name		= "aclk_100",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk_100,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_sources clkset_aclk_160 = {
+	.sources	= clkset_aclk_top_list,
+	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_160 = {
+	.clk	= {
+		.name		= "aclk_160",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk_160,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_sources clkset_aclk_133 = {
+	.sources	= clkset_aclk_top_list,
+	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_133 = {
+	.clk	= {
+		.name		= "aclk_133",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk_133,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
+};
+
+static struct clk *clkset_vpllsrc_list[] = {
+	[0] = &clk_fin_vpll,
+	[1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+	.sources	= clkset_vpllsrc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+	.clk	= {
+		.name		= "vpll_src",
+		.id		= -1,
+	},
+	.sources	= &clkset_vpllsrc,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+	[0] = &clk_vpllsrc.clk,
+	[1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+	.sources	= clkset_sclk_vpll_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk clk_sclk_vpll = {
+	.clk	= {
+		.name		= "sclk_vpll",
+		.id		= -1,
+	},
+	.sources	= &clkset_sclk_vpll,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
+};
+
+static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1<<24),
+	}
+};
+
+static struct clk init_clocks[] = {
+	/* Nothing here yet */
+};
+
+static struct clk *clkset_group_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_xusbxti,
+	[2] = &clk_sclk_hdmi27m,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group = {
+	.sources	= clkset_group_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "uclk1",
+			.id		= 0,
+			.ctrlbit	= (1 << 0),
+			.enable		= s5pv310_clk_ip_peril_ctrl,
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 1,
+			.enable		= s5pv310_clk_ip_peril_ctrl,
+			.ctrlbit	= (1 << 1),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 2,
+			.enable		= s5pv310_clk_ip_peril_ctrl,
+			.ctrlbit	= (1 << 2),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 3,
+			.enable		= s5pv310_clk_ip_peril_ctrl,
+			.ctrlbit	= (1 << 3),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_pwm",
+			.id		= -1,
+			.enable		= s5pv310_clk_ip_peril_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_moutcore,
+	&clk_coreclk,
+	&clk_armclk,
+	&clk_aclk_corem0,
+	&clk_aclk_cores,
+	&clk_aclk_corem1,
+	&clk_periphclk,
+	&clk_atclk,
+	&clk_pclk_dbg,
+	&clk_mout_corebus,
+	&clk_sclk_dmc,
+	&clk_aclk_cored,
+	&clk_aclk_corep,
+	&clk_aclk_acp,
+	&clk_pclk_acp,
+	&clk_vpllsrc,
+	&clk_sclk_vpll,
+	&clk_aclk_200,
+	&clk_aclk_100,
+	&clk_aclk_160,
+	&clk_aclk_133,
+};
+
+void __init_or_cpufreq s5pv310_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long vpll;
+	unsigned long vpllsrc;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long aclk_corem0;
+	unsigned long aclk_cores;
+	unsigned long aclk_corem1;
+	unsigned long periphclk;
+	unsigned long sclk_dmc;
+	unsigned long aclk_cored;
+	unsigned long aclk_corep;
+	unsigned long aclk_acp;
+	unsigned long pclk_acp;
+	unsigned int ptr;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
+	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+				__raw_readl(S5P_EPLL_CON1), pll_4500);
+
+	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+				__raw_readl(S5P_VPLL_CON1), pll_4502);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_vpll.rate = vpll;
+
+	printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+			apll, mpll, epll, vpll);
+
+	armclk = clk_get_rate(&clk_armclk.clk);
+	aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk);
+	aclk_cores = clk_get_rate(&clk_aclk_cores.clk);
+	aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk);
+	periphclk = clk_get_rate(&clk_periphclk.clk);
+	sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
+	aclk_cored = clk_get_rate(&clk_aclk_cored.clk);
+	aclk_corep = clk_get_rate(&clk_aclk_corep.clk);
+	aclk_acp = clk_get_rate(&clk_aclk_acp.clk);
+	pclk_acp = clk_get_rate(&clk_pclk_acp.clk);
+
+	printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n"
+			 "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n"
+			 "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld",
+			armclk, aclk_corem0, aclk_cores, aclk_corem1,
+			periphclk, sclk_dmc, aclk_cored, aclk_corep,
+			aclk_acp, pclk_acp);
+
+	clk_f.rate = armclk;
+	clk_h.rate = sclk_dmc;
+	clk_p.rate = periphclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	/* Nothing here yet */
+};
+
+void __init s5pv310_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
new file mode 100644
index 0000000..196c9f1
--- /dev/null
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -0,0 +1,122 @@
+/* linux/arch/arm/mach-s5pv310/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/s5pv310.h>
+
+#include <mach/regs-irq.h>
+
+void __iomem *gic_cpu_base_addr;
+
+extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
+			 unsigned int irq_start);
+extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
+
+/* Initial IO mappings */
+static struct map_desc s5pv310_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(S5PV310_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
+		.pfn		= __phys_to_pfn(S5PV310_PA_COMBINER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_L2CC,
+		.pfn		= __phys_to_pfn(S5PV310_PA_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5pv310_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5pv310_map_io
+ *
+ * register the standard cpu IO areas
+*/
+void __init s5pv310_map_io(void)
+{
+	iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
+}
+
+void __init s5pv310_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5pv310_register_clocks();
+	s5pv310_setup_clocks();
+}
+
+void __init s5pv310_init_irq(void)
+{
+	int irq;
+
+	gic_cpu_base_addr = S5P_VA_GIC_CPU;
+	gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
+	gic_cpu_init(0, S5P_VA_GIC_CPU);
+
+	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+				COMBINER_IRQ(irq, 0));
+		combiner_cascade_irq(irq, IRQ_SPI(irq));
+	}
+
+	/* The parameters of s5p_init_irq() are for VIC init.
+	 * Theses parameters should be NULL and 0 because S5PV310
+	 * uses GIC instead of VIC.
+	 */
+	s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class s5pv310_sysclass = {
+	.name	= "s5pv310-core",
+};
+
+static struct sys_device s5pv310_sysdev = {
+	.cls	= &s5pv310_sysclass,
+};
+
+static int __init s5pv310_core_init(void)
+{
+	return sysdev_class_register(&s5pv310_sysclass);
+}
+
+core_initcall(s5pv310_core_init);
+
+int __init s5pv310_init(void)
+{
+	printk(KERN_INFO "S5PV310: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5pv310_idle;
+
+	return sysdev_register(&s5pv310_sysdev);
+}
diff --git a/arch/arm/mach-s5pv310/headsmp.S b/arch/arm/mach-s5pv310/headsmp.S
new file mode 100644
index 0000000..164b7b0
--- /dev/null
+++ b/arch/arm/mach-s5pv310/headsmp.S
@@ -0,0 +1,41 @@
+/*
+ *  linux/arch/arm/mach-s5pv310/headsmp.S
+ *
+ *  Cloned from linux/arch/arm/mach-realview/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * s5pv310 specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(s5pv310_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
new file mode 100644
index 0000000..6fb3893
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx, tmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-s5pv310/include/mach/entry-macro.S
new file mode 100644
index 0000000..e600e1d
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/entry-macro.S
@@ -0,0 +1,84 @@
+/* arch/arm/mach-s5pv310/include/mach/entry-macro.S
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S5PV310 platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+		addne	\irqnr, \irqnr, #32
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h
new file mode 100644
index 0000000..20cb80c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/gpio.h
@@ -0,0 +1,135 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
+
+/* GPIO bank sizes */
+#define S5PV310_GPIO_A0_NR	(8)
+#define S5PV310_GPIO_A1_NR	(6)
+#define S5PV310_GPIO_B_NR	(8)
+#define S5PV310_GPIO_C0_NR	(5)
+#define S5PV310_GPIO_C1_NR	(5)
+#define S5PV310_GPIO_D0_NR	(4)
+#define S5PV310_GPIO_D1_NR	(4)
+#define S5PV310_GPIO_E0_NR	(5)
+#define S5PV310_GPIO_E1_NR	(8)
+#define S5PV310_GPIO_E2_NR	(6)
+#define S5PV310_GPIO_E3_NR	(8)
+#define S5PV310_GPIO_E4_NR	(8)
+#define S5PV310_GPIO_F0_NR	(8)
+#define S5PV310_GPIO_F1_NR	(8)
+#define S5PV310_GPIO_F2_NR	(8)
+#define S5PV310_GPIO_F3_NR	(6)
+#define S5PV310_GPIO_J0_NR	(8)
+#define S5PV310_GPIO_J1_NR	(5)
+#define S5PV310_GPIO_K0_NR	(7)
+#define S5PV310_GPIO_K1_NR	(7)
+#define S5PV310_GPIO_K2_NR	(7)
+#define S5PV310_GPIO_K3_NR	(7)
+#define S5PV310_GPIO_L0_NR	(8)
+#define S5PV310_GPIO_L1_NR	(3)
+#define S5PV310_GPIO_L2_NR	(8)
+#define S5PV310_GPIO_X0_NR	(8)
+#define S5PV310_GPIO_X1_NR	(8)
+#define S5PV310_GPIO_X2_NR	(8)
+#define S5PV310_GPIO_X3_NR	(8)
+#define S5PV310_GPIO_Z_NR	(7)
+
+/* GPIO bank numbers */
+
+#define S5PV310_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5PV310_GPIO_A0_START	= 0,
+	S5PV310_GPIO_A1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_A0),
+	S5PV310_GPIO_B_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_A1),
+	S5PV310_GPIO_C0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_B),
+	S5PV310_GPIO_C1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_C0),
+	S5PV310_GPIO_D0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_C1),
+	S5PV310_GPIO_D1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_D0),
+	S5PV310_GPIO_E0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_D1),
+	S5PV310_GPIO_E1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E0),
+	S5PV310_GPIO_E2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E1),
+	S5PV310_GPIO_E3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E2),
+	S5PV310_GPIO_E4_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E3),
+	S5PV310_GPIO_F0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E4),
+	S5PV310_GPIO_F1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F0),
+	S5PV310_GPIO_F2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F1),
+	S5PV310_GPIO_F3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F2),
+	S5PV310_GPIO_J0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F3),
+	S5PV310_GPIO_J1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_J0),
+	S5PV310_GPIO_K0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_J1),
+	S5PV310_GPIO_K1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K0),
+	S5PV310_GPIO_K2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K1),
+	S5PV310_GPIO_K3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K2),
+	S5PV310_GPIO_L0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K3),
+	S5PV310_GPIO_L1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_L0),
+	S5PV310_GPIO_L2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_L1),
+	S5PV310_GPIO_X0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_L2),
+	S5PV310_GPIO_X1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X0),
+	S5PV310_GPIO_X2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X1),
+	S5PV310_GPIO_X3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X2),
+	S5PV310_GPIO_Z_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
+};
+
+/* S5PV310 GPIO number definitions */
+#define S5PV310_GPA0(_nr)	(S5PV310_GPIO_A0_START + (_nr))
+#define S5PV310_GPA1(_nr)	(S5PV310_GPIO_A1_START + (_nr))
+#define S5PV310_GPB(_nr)	(S5PV310_GPIO_B_START + (_nr))
+#define S5PV310_GPC0(_nr)	(S5PV310_GPIO_C0_START + (_nr))
+#define S5PV310_GPC1(_nr)	(S5PV310_GPIO_C1_START + (_nr))
+#define S5PV310_GPD0(_nr)	(S5PV310_GPIO_D0_START + (_nr))
+#define S5PV310_GPD1(_nr)	(S5PV310_GPIO_D1_START + (_nr))
+#define S5PV310_GPE0(_nr)	(S5PV310_GPIO_E0_START + (_nr))
+#define S5PV310_GPE1(_nr)	(S5PV310_GPIO_E1_START + (_nr))
+#define S5PV310_GPE2(_nr)	(S5PV310_GPIO_E2_START + (_nr))
+#define S5PV310_GPE3(_nr)	(S5PV310_GPIO_E3_START + (_nr))
+#define S5PV310_GPE4(_nr)	(S5PV310_GPIO_E4_START + (_nr))
+#define S5PV310_GPF0(_nr)	(S5PV310_GPIO_F0_START + (_nr))
+#define S5PV310_GPF1(_nr)	(S5PV310_GPIO_F1_START + (_nr))
+#define S5PV310_GPF2(_nr)	(S5PV310_GPIO_F2_START + (_nr))
+#define S5PV310_GPF3(_nr)	(S5PV310_GPIO_F3_START + (_nr))
+#define S5PV310_GPJ0(_nr)	(S5PV310_GPIO_J0_START + (_nr))
+#define S5PV310_GPJ1(_nr)	(S5PV310_GPIO_J1_START + (_nr))
+#define S5PV310_GPK0(_nr)	(S5PV310_GPIO_K0_START + (_nr))
+#define S5PV310_GPK1(_nr)	(S5PV310_GPIO_K1_START + (_nr))
+#define S5PV310_GPK2(_nr)	(S5PV310_GPIO_K2_START + (_nr))
+#define S5PV310_GPK3(_nr)	(S5PV310_GPIO_K3_START + (_nr))
+#define S5PV310_GPL0(_nr)	(S5PV310_GPIO_L0_START + (_nr))
+#define S5PV310_GPL1(_nr)	(S5PV310_GPIO_L1_START + (_nr))
+#define S5PV310_GPL2(_nr)	(S5PV310_GPIO_L2_START + (_nr))
+#define S5PV310_GPX0(_nr)	(S5PV310_GPIO_X0_START + (_nr))
+#define S5PV310_GPX1(_nr)	(S5PV310_GPIO_X1_START + (_nr))
+#define S5PV310_GPX2(_nr)	(S5PV310_GPIO_X2_START + (_nr))
+#define S5PV310_GPX3(_nr)	(S5PV310_GPIO_X3_START + (_nr))
+#define S5PV310_GPZ(_nr)	(S5PV310_GPIO_Z_START + (_nr))
+
+/* the end of the S5PV310 specific gpios */
+#define S5PV310_GPIO_END	(S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1)
+#define S3C_GPIO_END		S5PV310_GPIO_END
+
+/* define the number of gpios we need to the one after the GPZ() range */
+#define ARCH_NR_GPIOS		(S5PV310_GPZ(S5PV310_GPIO_Z_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-s5pv310/include/mach/hardware.h
new file mode 100644
index 0000000..28ff988
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-s5pv310/include/mach/io.h
new file mode 100644
index 0000000..8a7f912
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV310
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h
new file mode 100644
index 0000000..56885ca
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
@@ -0,0 +1,74 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* Private Peripheral Interrupt */
+#define IRQ_PPI(x)		S5P_IRQ(x+16)
+
+#define IRQ_LOCALTIMER		IRQ_PPI(13)
+
+/* Shared Peripheral Interrupt */
+#define IRQ_SPI(x)		S5P_IRQ(x+32)
+
+#define IRQ_EINT0		IRQ_SPI(40)
+#define IRQ_EINT1		IRQ_SPI(41)
+#define IRQ_EINT2		IRQ_SPI(42)
+#define IRQ_EINT3		IRQ_SPI(43)
+#define IRQ_USB_HSOTG		IRQ_SPI(44)
+#define IRQ_USB_HOST		IRQ_SPI(45)
+#define IRQ_MODEM_IF		IRQ_SPI(46)
+#define IRQ_ROTATOR		IRQ_SPI(47)
+#define IRQ_JPEG		IRQ_SPI(48)
+#define IRQ_2D			IRQ_SPI(49)
+#define IRQ_PCIE		IRQ_SPI(50)
+#define IRQ_SYSTEM_TIMER	IRQ_SPI(51)
+#define IRQ_MFC			IRQ_SPI(52)
+#define IRQ_WTD			IRQ_SPI(53)
+#define IRQ_AUDIO_SS		IRQ_SPI(54)
+#define IRQ_AC97		IRQ_SPI(55)
+#define IRQ_SPDIF		IRQ_SPI(56)
+#define IRQ_KEYPAD		IRQ_SPI(57)
+#define IRQ_INTFEEDCTRL_SSS	IRQ_SPI(58)
+#define IRQ_SLIMBUS		IRQ_SPI(59)
+#define IRQ_PMU			IRQ_SPI(60)
+#define IRQ_TSI			IRQ_SPI(61)
+#define IRQ_SATA		IRQ_SPI(62)
+#define IRQ_GPS			IRQ_SPI(63)
+
+#define MAX_IRQ_IN_COMBINER	8
+#define COMBINER_GROUP(x)	((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
+#define COMBINER_IRQ(x, y)	(COMBINER_GROUP(x) + y)
+
+#define IRQ_TIMER0_VIC		COMBINER_IRQ(22, 0)
+#define IRQ_TIMER1_VIC		COMBINER_IRQ(22, 1)
+#define IRQ_TIMER2_VIC		COMBINER_IRQ(22, 2)
+#define IRQ_TIMER3_VIC		COMBINER_IRQ(22, 3)
+#define IRQ_TIMER4_VIC		COMBINER_IRQ(22, 4)
+
+#define IRQ_UART0		COMBINER_IRQ(26, 0)
+#define IRQ_UART1		COMBINER_IRQ(26, 1)
+#define IRQ_UART2		COMBINER_IRQ(26, 2)
+#define IRQ_UART3		COMBINER_IRQ(26, 3)
+#define IRQ_UART4		COMBINER_IRQ(26, 4)
+
+#define IRQ_IIC			COMBINER_IRQ(27, 0)
+
+/* Set the default NR_IRQS */
+#define NR_IRQS			COMBINER_IRQ(MAX_COMBINER_NR, 0)
+
+#define MAX_COMBINER_NR		39
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
new file mode 100644
index 0000000..87697c9
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET			(0x10000)
+
+#include <plat/map-s5p.h>
+
+#define S5PV310_PA_CHIPID		(0x10000000)
+#define S5P_PA_CHIPID			S5PV310_PA_CHIPID
+
+#define S5PV310_PA_SYSCON		(0x10020000)
+#define S5P_PA_SYSCON			S5PV310_PA_SYSCON
+
+#define S5PV310_PA_WATCHDOG		(0x10060000)
+
+#define S5PV310_PA_COMBINER		(0x10448000)
+
+#define S5PV310_PA_COREPERI		(0x10500000)
+#define S5PV310_PA_GIC_CPU		(0x10500100)
+#define S5PV310_PA_TWD			(0x10500600)
+#define S5PV310_PA_GIC_DIST		(0x10501000)
+#define S5PV310_PA_L2CC			(0x10502000)
+
+#define S5PV310_PA_GPIO			(0x11000000)
+#define S5P_PA_GPIO			S5PV310_PA_GPIO
+
+#define S5PV310_PA_UART			(0x13800000)
+
+#define S5P_PA_UART(x)			(S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
+#define S5P_PA_UART4			S5P_PA_UART(4)
+
+#define S5P_SZ_UART			SZ_256
+
+#define S5PV310_PA_IIC0			(0x13860000)
+
+#define S5PV310_PA_TIMER		(0x139D0000)
+#define S5P_PA_TIMER			S5PV310_PA_TIMER
+
+#define S5PV310_PA_SDRAM		(0x40000000)
+#define S5P_PA_SDRAM			S5PV310_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART			S5PV310_PA_UART
+#define S3C_PA_IIC			S5PV310_PA_IIC0
+#define S3C_PA_WDT			S5PV310_PA_WATCHDOG
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h
new file mode 100644
index 0000000..1dffb48
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/memory.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
+
+#define PHYS_OFFSET		UL(0x40000000)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
new file mode 100644
index 0000000..7e6da27
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+ *
+ * S5PV310 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
new file mode 100644
index 0000000..59e3a7e
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
+
+#define S5P_INFORM0			S5P_CLKREG(0x800)
+
+#define S5P_EPLL_CON0			S5P_CLKREG(0x1C110)
+#define S5P_EPLL_CON1			S5P_CLKREG(0x1C114)
+#define S5P_VPLL_CON0			S5P_CLKREG(0x1C120)
+#define S5P_VPLL_CON1			S5P_CLKREG(0x1C124)
+
+#define S5P_CLKSRC_TOP0			S5P_CLKREG(0x1C210)
+#define S5P_CLKSRC_TOP1			S5P_CLKREG(0x1C214)
+
+#define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x1C250)
+
+#define S5P_CLKDIV_TOP			S5P_CLKREG(0x1C510)
+
+#define S5P_CLKDIV_PERIL0		S5P_CLKREG(0x1C550)
+#define S5P_CLKDIV_PERIL1		S5P_CLKREG(0x1C554)
+#define S5P_CLKDIV_PERIL2		S5P_CLKREG(0x1C558)
+#define S5P_CLKDIV_PERIL3		S5P_CLKREG(0x1C55C)
+#define S5P_CLKDIV_PERIL4		S5P_CLKREG(0x1C560)
+#define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x1C564)
+
+#define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x1C950)
+
+#define S5P_CLKSRC_CORE			S5P_CLKREG(0x20200)
+
+#define S5P_CLKDIV_CORE0		S5P_CLKREG(0x20500)
+
+#define S5P_APLL_LOCK			S5P_CLKREG(0x24000)
+#define S5P_MPLL_LOCK			S5P_CLKREG(0x24004)
+#define S5P_APLL_CON0			S5P_CLKREG(0x24100)
+#define S5P_APLL_CON1			S5P_CLKREG(0x24104)
+#define S5P_MPLL_CON0			S5P_CLKREG(0x24108)
+#define S5P_MPLL_CON1			S5P_CLKREG(0x2410C)
+
+#define S5P_CLKSRC_CPU			S5P_CLKREG(0x24200)
+#define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x24400)
+
+#define S5P_CLKDIV_CPU			S5P_CLKREG(0x24500)
+#define S5P_CLKDIV_STATCPU		S5P_CLKREG(0x24600)
+
+#define S5P_CLKGATE_SCLKCPU		S5P_CLKREG(0x24800)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-s5pv310/include/mach/regs-irq.h
new file mode 100644
index 0000000..c6e09c7
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h
new file mode 100644
index 0000000..990f3ba
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/smp.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/smp.h
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/smp.h
+*/
+
+#ifndef ASM_ARCH_SMP_H
+#define ASM_ARCH_SMP_H __FILE__
+
+#include <asm/hardware/gic.h>
+
+extern void __iomem *gic_cpu_base_addr;
+
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x03;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+#endif
diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-s5pv310/include/mach/system.h
new file mode 100644
index 0000000..d10c009
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/system.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/system-reset.h>
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-s5pv310/include/mach/timex.h
new file mode 100644
index 0000000..bd2359b
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/timex.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV310 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-s5pv310/include/mach/uncompress.h
new file mode 100644
index 0000000..59593c1
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/uncompress.h
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+
+	/*
+	 * For preventing FIFO overrun or infinite loop of UART console,
+	 * fifo_max should be the minimum fifo size of all of the UART channels
+	 */
+	fifo_mask = S5PV210_UFSTAT_TXMASK;
+	fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
+}
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
new file mode 100644
index 0000000..3f565eb
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5PV310 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END	  (0xF0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv310/init.c b/arch/arm/mach-s5pv310/init.c
new file mode 100644
index 0000000..182dcf4
--- /dev/null
+++ b/arch/arm/mach-s5pv310/init.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/mach-s5pv310/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->has_fracval = 1;
+			tcfg->clocks = s5pv310_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c
new file mode 100644
index 0000000..0f70521
--- /dev/null
+++ b/arch/arm/mach-s5pv310/irq-combiner.c
@@ -0,0 +1,125 @@
+/* linux/arch/arm/mach-s5pv310/irq-combiner.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/common/gic.c
+ *
+ * IRQ COMBINER support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(unsigned int irq)
+{
+	struct combiner_chip_data *combiner_data = get_irq_chip_data(irq);
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+
+	__raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+
+	__raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	/* primary controller ack'ing */
+	chip->ack(irq);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+
+	if (status == 0)
+		goto out;
+
+	for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) {
+		if (status & 0x1)
+			break;
+		status >>= 1;
+	}
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	/* primary controller unmasking */
+	chip->unmask(irq);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.mask		= combiner_mask_irq,
+	.unmask		= combiner_unmask_irq,
+};
+
+void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+	if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	set_irq_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+			  unsigned int irq_start)
+{
+	unsigned int i;
+
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_start;
+
+	/* Disable all interrupts */
+
+	__raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR);
+
+	/* Setup the Linux IRQ subsystem */
+
+	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+				+ MAX_IRQ_IN_COMBINER; i++) {
+		set_irq_chip(i, &combiner_chip);
+		set_irq_chip_data(i, &combiner_data[combiner_nr]);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-s5pv310/localtimer.c
new file mode 100644
index 0000000..2784036
--- /dev/null
+++ b/arch/arm/mach-s5pv310/localtimer.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pv310/localtimer.c
+ *
+ * Cloned from linux/arch/arm/mach-realview/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c
new file mode 100644
index 0000000..0d6ab77
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-smdkv310.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKV310_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDKV310_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+};
+
+static void __init smdkv310_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+}
+
+static void __init smdkv310_machine_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
+#endif
+}
+
+MACHINE_START(SMDKV310, "SMDKV310")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv310_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &s5pv310_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c
new file mode 100644
index 0000000..2388cb9
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-universal_c210.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define UNIVERSAL_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define UNIVERSAL_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG256 |	\
+				 S5PV210_UFCON_RXTRIG256)
+
+static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+};
+
+static void __init universal_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+}
+
+static void __init universal_machine_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
+#endif
+}
+
+MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
+	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv310_init_irq,
+	.map_io		= universal_map_io,
+	.init_machine	= universal_machine_init,
+	.timer		= &s5pv310_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
new file mode 100644
index 0000000..fe9469ab
--- /dev/null
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -0,0 +1,192 @@
+/* linux/arch/arm/mach-s5pv310/platsmp.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+extern void s5pv310_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+
+volatile int __cpuinitdata pen_release = -1;
+
+static void __iomem *scu_base_addr(void)
+{
+	return (void __iomem *)(S5P_VA_SCU);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, gic_cpu_base_addr);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	smp_cross_call(cpumask_of(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+
+void __init smp_init_cpus(void)
+{
+	void __iomem *scu_base = scu_base_addr();
+	unsigned int i, ncores;
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "S5PV310: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "S5PV310: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	smp_store_cpu_info(cpu);
+
+	/* are we trying to boot more cores than exist? */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	/*
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start.
+	 */
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
+
+		/*
+		 * Write the address of secondary startup into the
+		 * system-wide flags register. The boot monitor waits
+		 * until it receives a soft interrupt, and then the
+		 * secondary CPU branches to this address.
+		 */
+	__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_INFORM0);
+	}
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c
new file mode 100644
index 0000000..4367128
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c0.c
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c
new file mode 100644
index 0000000..1ecd5bc
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c1.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c1.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C1 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c
new file mode 100644
index 0000000..4c0d8de
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c2.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C2 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
+	s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
+	s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c
new file mode 100644
index 0000000..01b012a
--- /dev/null
+++ b/arch/arm/mach-s5pv310/time.c
@@ -0,0 +1,287 @@
+/* linux/arch/arm/mach-s5pv310/time.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 (and compatible) HRT support
+ * PWM 2/4 is used for this feature
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <asm/mach/time.h>
+
+static unsigned long clock_count_per_tick;
+
+static struct clk *tin2;
+static struct clk *tin4;
+static struct clk *tdiv2;
+static struct clk *tdiv4;
+static struct clk *timerclk;
+
+static void s5pv310_pwm_stop(unsigned int pwm_id)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	switch (pwm_id) {
+	case 2:
+		tcon &= ~S3C2410_TCON_T2START;
+		break;
+	case 4:
+		tcon &= ~S3C2410_TCON_T4START;
+		break;
+	default:
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	/* timers reload after counting zero, so reduce the count by 1 */
+	tcnt--;
+
+	/* ensure timer is stopped... */
+	switch (pwm_id) {
+	case 2:
+		tcon &= ~(0xf<<12);
+		tcon |= S3C2410_TCON_T2MANUALUPD;
+
+		__raw_writel(tcnt, S3C2410_TCNTB(2));
+		__raw_writel(tcnt, S3C2410_TCMPB(2));
+		__raw_writel(tcon, S3C2410_TCON);
+
+		break;
+	case 4:
+		tcon &= ~(7<<20);
+		tcon |= S3C2410_TCON_T4MANUALUPD;
+
+		__raw_writel(tcnt, S3C2410_TCNTB(4));
+		__raw_writel(tcnt, S3C2410_TCMPB(4));
+		__raw_writel(tcon, S3C2410_TCON);
+
+		break;
+	default:
+		break;
+	}
+}
+
+static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic)
+{
+	unsigned long tcon;
+
+	tcon  = __raw_readl(S3C2410_TCON);
+
+	switch (pwm_id) {
+	case 2:
+		tcon |= S3C2410_TCON_T2START;
+		tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T2RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T2RELOAD;
+		break;
+	case 4:
+		tcon |= S3C2410_TCON_T4START;
+		tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T4RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T4RELOAD;
+		break;
+	default:
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static int s5pv310_pwm_set_next_event(unsigned long cycles,
+					struct clock_event_device *evt)
+{
+	s5pv310_pwm_init(2, cycles);
+	s5pv310_pwm_start(2, 0);
+	return 0;
+}
+
+static void s5pv310_pwm_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	s5pv310_pwm_stop(2);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		s5pv310_pwm_init(2, clock_count_per_tick);
+		s5pv310_pwm_start(2, 1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device pwm_event_device = {
+	.name		= "pwm_timer2",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.shift		= 32,
+	.set_next_event	= s5pv310_pwm_set_next_event,
+	.set_mode	= s5pv310_pwm_set_mode,
+};
+
+irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &pwm_event_device;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction s5pv310_clock_event_irq = {
+	.name		= "pwm_timer2_irq",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= s5pv310_clock_event_isr,
+};
+
+static void __init s5pv310_clockevent_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+	struct clk *tscaler;
+
+	pclk = clk_get_rate(timerclk);
+
+	/* configure clock tick */
+
+	tscaler = clk_get_parent(tdiv2);
+
+	clk_set_rate(tscaler, pclk / 2);
+	clk_set_rate(tdiv2, pclk / 2);
+	clk_set_parent(tin2, tdiv2);
+
+	clock_rate = clk_get_rate(tin2);
+
+	clock_count_per_tick = clock_rate / HZ;
+
+	pwm_event_device.mult =
+		div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
+	pwm_event_device.max_delta_ns =
+		clockevent_delta2ns(-1, &pwm_event_device);
+	pwm_event_device.min_delta_ns =
+		clockevent_delta2ns(1, &pwm_event_device);
+
+	pwm_event_device.cpumask = cpumask_of(0);
+	clockevents_register_device(&pwm_event_device);
+
+	setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq);
+}
+
+static cycle_t s5pv310_pwm4_read(struct clocksource *cs)
+{
+	return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
+}
+
+struct clocksource pwm_clocksource = {
+	.name		= "pwm_timer4",
+	.rating		= 250,
+	.read		= s5pv310_pwm4_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS ,
+};
+
+static void __init s5pv310_clocksource_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+
+	pclk = clk_get_rate(timerclk);
+
+	clk_set_rate(tdiv4, pclk / 2);
+	clk_set_parent(tin4, tdiv4);
+
+	clock_rate = clk_get_rate(tin4);
+
+	s5pv310_pwm_init(4, ~0);
+	s5pv310_pwm_start(4, 1);
+
+	pwm_clocksource.mult =
+		clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift);
+
+	if (clocksource_register(&pwm_clocksource))
+		panic("%s: can't register clocksource\n", pwm_clocksource.name);
+}
+
+static void __init s5pv310_timer_resources(void)
+{
+	struct platform_device tmpdev;
+
+	tmpdev.dev.bus = &platform_bus_type;
+
+	timerclk = clk_get(NULL, "timers");
+	if (IS_ERR(timerclk))
+		panic("failed to get timers clock for system timer");
+
+	clk_enable(timerclk);
+
+	tmpdev.id = 2;
+	tin2 = clk_get(&tmpdev.dev, "pwm-tin");
+	if (IS_ERR(tin2))
+		panic("failed to get pwm-tin2 clock for system timer");
+
+	tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
+	if (IS_ERR(tdiv2))
+		panic("failed to get pwm-tdiv2 clock for system timer");
+	clk_enable(tin2);
+
+	tmpdev.id = 4;
+	tin4 = clk_get(&tmpdev.dev, "pwm-tin");
+	if (IS_ERR(tin4))
+		panic("failed to get pwm-tin4 clock for system timer");
+
+	tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
+	if (IS_ERR(tdiv4))
+		panic("failed to get pwm-tdiv4 clock for system timer");
+
+	clk_enable(tin4);
+}
+
+static void __init s5pv310_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base = S5P_VA_TWD;
+#endif
+
+	s5pv310_timer_resources();
+	s5pv310_clockevent_init();
+	s5pv310_clocksource_init();
+}
+
+struct sys_timer s5pv310_timer = {
+	.init		= s5pv310_timer_init,
+};
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 8c8845b..d18f21a 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -77,7 +77,7 @@
  */
 #ifdef CONFIG_SA1111
 #define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARPSL_LOCOMO)
+#elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4c704b4..54b479c 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -7,6 +7,7 @@ config ARCH_SH7367
 	select CPU_V6
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select SH_CLK_CPG
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_SH7377
@@ -14,6 +15,7 @@ config ARCH_SH7377
 	select CPU_V7
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select SH_CLK_CPG
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_SH7372
@@ -21,6 +23,7 @@ config ARCH_SH7372
 	select CPU_V7
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select SH_CLK_CPG
 	select GENERIC_CLOCKEVENTS
 
 comment "SH-Mobile Board Type"
@@ -39,6 +42,20 @@ config MACH_AP4EVB
 	bool "AP4EVB board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
+	select SH_LCD_MIPI_DSI
+
+choice
+	prompt "AP4EVB LCD panel selection"
+	default AP4EVB_QHD
+	depends on MACH_AP4EVB
+
+config AP4EVB_QHD
+	bool "MIPI-DSI QHD (960x540)"
+
+config AP4EVB_WVGA
+	bool "Parallel WVGA (800x480)"
+
+endchoice
 
 comment "SH-Mobile System Configuration"
 
@@ -88,6 +105,15 @@ config SH_TIMER_CMT
 	help
 	  This enables build of the CMT timer driver.
 
+config SH_TIMER_TMU
+	bool "TMU timer driver"
+	default y
+	help
+	  This enables build of the TMU timer driver.
+
 endmenu
 
+config SH_CLK_CPG
+	bool
+
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6d385d3..5e16b4c 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,12 +3,12 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o
+obj-y				:= timer.o console.o clock.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
-obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7367.o intc-sh7377.o
-obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7367.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7377.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 
 # Pinmux setup
 pfc-$(CONFIG_ARCH_SH7367)	:= pfc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 1c2ec96..23d472f 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -17,25 +17,45 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/usb/r8a66597.h>
+
+#include <sound/sh_fsi.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mipi_dsi.h>
+
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
 
 /*
  * Address	Interface		BusWidth	note
@@ -80,12 +100,56 @@
  */
 
 /*
- * KEYSC
+ * LCD / IRQ / KEYSC / IrDA
+ *
+ * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
+ * LCD = 2nd LCDC (WVGA)
  *
- * SW43		KEYSC
- * -------------------------
- * ON		enable
- * OFF		disable
+ * 		|		SW43			|
+ * SW3		|	ON		|	OFF	|
+ * -------------+-----------------------+---------------+
+ * ON		| KEY / IrDA		| LCD		|
+ * OFF		| KEY / IrDA / IRQ	| IRQ		|
+ *
+ *
+ * QHD / WVGA display
+ *
+ * You can choice display type on menuconfig.
+ * Then, check above dip-switch.
+ */
+
+/*
+ * USB
+ *
+ * J7 : 1-2  MAX3355E VBUS
+ *      2-3  DC 5.0V
+ *
+ * S39: bit2: off
+ */
+
+/*
+ * FSI/FSMI
+ *
+ * SW41	:  ON : SH-Mobile AP4 Audio Mode
+ *	: OFF : Bluetooth Audio Mode
+ */
+
+/*
+ * MMC0/SDHI1 (CN7)
+ *
+ * J22 : select card voltage
+ *       1-2 pin : 1.8v
+ *       2-3 pin : 3.3v
+ *
+ *        SW1  |             SW33
+ *             | bit1 | bit2 | bit3 | bit4
+ * ------------+------+------+------+-------
+ * MMC0   OFF  |  OFF |  ON  |  ON  |  X
+ * SDHI1  OFF  |  ON  |   X  |  OFF | ON
+ *
+ * voltage lebel
+ * CN7 : 1.8v
+ * CN12: 3.3v
  */
 
 /* MTD */
@@ -148,7 +212,7 @@ static struct resource smc911x_resources[] = {
 		.end	= 0x16000000 - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= 6,
+		.start	= evt2irq(0x02c0) /* IRQ6A */,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
@@ -169,6 +233,180 @@ static struct platform_device smc911x_device = {
 	},
 };
 
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xE6BD0000,
+		.end	= 0xE6BD00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1ac0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1ae0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6850000,
+		.end    = 0xe68501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e00) /* SDHI0 */,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_ocr_mask	= MMC_VDD_165_195,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0xe6860000,
+		.end    = 0xe68601ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+
+/* USB1 */
+static void usb1_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
+	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip	= 1,
+	.port_power	= usb1_host_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xE68B0000,
+		.end	= 0xE68B00E6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name	= "r8a66597_hcd",
+	.id	= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/*
+ * QHD display
+ */
+#ifdef CONFIG_AP4EVB_QHD
+
 /* KEYSC (Needs SW43 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode		= SH_KEYSC_MODE_1,
@@ -191,7 +429,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -206,32 +444,362 @@ static struct platform_device keysc_device = {
 	},
 };
 
-/* SDHI0 */
-static struct resource sdhi0_resources[] = {
+/* MIPI-DSI */
+static struct resource mipidsi0_resources[] = {
 	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6850000,
-		.end    = 0xe68501ff,
+		.start  = 0xffc60000,
+		.end    = 0xffc68fff,
 		.flags  = IORESOURCE_MEM,
 	},
+};
+
+static struct sh_mipi_dsi_info mipidsi0_info = {
+	.data_format	= MIPI_RGB888,
+	.lcd_chan	= &lcdc_info.ch[0],
+};
+
+static struct platform_device mipidsi0_device = {
+	.name           = "sh-mipi-dsi",
+	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
+	.resource       = mipidsi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &mipidsi0_info,
+	},
+};
+
+/* This function will disappear when we switch to (runtime) PM */
+static int __init ap4evb_init_display_clk(void)
+{
+	struct clk *lcdc_clk;
+	struct clk *dsitx_clk;
+	int ret;
+
+	lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
+	if (IS_ERR(lcdc_clk))
+		return PTR_ERR(lcdc_clk);
+
+	dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
+	if (IS_ERR(dsitx_clk)) {
+		ret = PTR_ERR(dsitx_clk);
+		goto eclkdsitxget;
+	}
+
+	ret = clk_enable(lcdc_clk);
+	if (ret < 0)
+		goto eclklcdcon;
+
+	ret = clk_enable(dsitx_clk);
+	if (ret < 0)
+		goto eclkdsitxon;
+
+	return 0;
+
+eclkdsitxon:
+	clk_disable(lcdc_clk);
+eclklcdcon:
+	clk_put(dsitx_clk);
+eclkdsitxget:
+	clk_put(lcdc_clk);
+
+	return ret;
+}
+device_initcall(ap4evb_init_display_clk);
+
+static struct platform_device *qhd_devices[] __initdata = {
+	&mipidsi0_device,
+	&keysc_device,
+};
+#endif /* CONFIG_AP4EVB_QHD */
+
+/* FSI */
+#define IRQ_FSI		evt2irq(0x1840)
+#define FSIACKCR	0xE6150018
+static void fsiackcr_init(struct clk *clk)
+{
+	u32 status = __raw_readl(clk->enable_reg);
+
+	/* use external clock */
+	status &= ~0x000000ff;
+	status |= 0x00000080;
+	__raw_writel(status, clk->enable_reg);
+}
+
+static struct clk_ops fsiackcr_clk_ops = {
+	.init = fsiackcr_init,
+};
+
+static struct clk fsiackcr_clk = {
+	.ops		= &fsiackcr_clk_ops,
+	.enable_reg	= (void __iomem *)FSIACKCR,
+	.rate		= 0, /* unknown */
+};
+
+static struct sh_fsi_platform_info fsi_info = {
+	.porta_flags = SH_FSI_BRS_INV |
+		       SH_FSI_OUT_SLAVE_MODE |
+		       SH_FSI_IN_SLAVE_MODE |
+		       SH_FSI_OFMT(PCM) |
+		       SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C0400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
 	[1] = {
-		.start  = 96,
+		.start  = IRQ_FSI,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi2",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB24,
+		.clock_divider = 1,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_cfg = {
+			.name = "HDMI",
+			/* So far only 720p is supported */
+			.xres = 1280,
+			.yres = 720,
+			/*
+			 * If left and right margins are not multiples of 8,
+			 * LDHAJR will be adjusted accordingly by the LCDC
+			 * driver. Until we start using EDID, these values
+			 * might have to be adjusted for different monitors.
+			 */
+			.left_margin = 200,
+			.right_margin = 88,
+			.hsync_len = 48,
+			.upper_margin = 20,
+			.lower_margin = 5,
+			.vsync_len = 5,
+			.pixclock = 13468,
+			.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+		},
+	}
+};
+
+static struct resource lcdc1_resources[] = {
+	[0] = {
+		.name	= "LCDC1",
+		.start	= 0xfe944000,
+		.end	= 0xfe947fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x17a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc1_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc1_resources),
+	.resource	= lcdc1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc1_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+static struct sh_mobile_hdmi_info hdmi_info = {
+	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
+	.lcd_dev = &lcdc1_device.dev,
+};
+
+static struct resource hdmi_resources[] = {
+	[0] = {
+		.name	= "HDMI",
+		.start	= 0xe6be0000,
+		.end	= 0xe6be00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
+		.start	= evt2irq(0x17e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device hdmi_device = {
+	.name		= "sh-mobile-hdmi",
+	.num_resources	= ARRAY_SIZE(hdmi_resources),
+	.resource	= hdmi_resources,
+	.id             = -1,
+	.dev	= {
+		.platform_data	= &hdmi_info,
+	},
 };
 
 static struct platform_device *ap4evb_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
-	&keysc_device,
 	&sdhi0_device,
+	&sdhi1_device,
+	&usb1_host_device,
+	&fsi_device,
+	&sh_mmcif_device,
+	&lcdc1_device,
+	&lcdc_device,
+	&hdmi_device,
+};
+
+static int __init hdmi_init_pm_clock(void)
+{
+	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+	int ret;
+	long rate;
+
+	if (IS_ERR(hdmi_ick)) {
+		ret = PTR_ERR(hdmi_ick);
+		pr_err("Cannot get HDMI ICK: %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount);
+		goto out;
+	}
+
+	pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk));
+
+	rate = clk_round_rate(&pllc2_clk, 594000000);
+	if (rate < 0) {
+		pr_err("Cannot get suitable rate: %ld\n", rate);
+		ret = rate;
+		goto out;
+	}
+
+	ret = clk_set_rate(&pllc2_clk, rate);
+	if (ret < 0) {
+		pr_err("Cannot set rate %ld: %d\n", rate, ret);
+		goto out;
+	}
+
+	pr_debug("PLLC2 set frequency %lu\n", rate);
+
+	ret = clk_set_parent(hdmi_ick, &pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set HDMI parent: %d\n", ret);
+		goto out;
+	}
+
+out:
+	if (!IS_ERR(hdmi_ick))
+		clk_put(hdmi_ick);
+	return ret;
+}
+
+device_initcall(hdmi_init_pm_clock);
+
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * gpio_pull_up
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
+static void __init gpio_pull_up(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xC0;
+	__raw_writeb(data, addr);
+}
+
+/* TouchScreen */
+#define IRQ28	evt2irq(0x3380) /* IRQ28A */
+#define IRQ7	evt2irq(0x02e0) /* IRQ7A */
+static int ts_get_pendown_state(void)
+{
+	int val1, val2;
+
+	gpio_free(GPIO_FN_IRQ28_123);
+	gpio_free(GPIO_FN_IRQ7_40);
+
+	gpio_request(GPIO_PORT123, NULL);
+	gpio_request(GPIO_PORT40, NULL);
+
+	gpio_direction_input(GPIO_PORT123);
+	gpio_direction_input(GPIO_PORT40);
+
+	val1 = gpio_get_value(GPIO_PORT123);
+	val2 = gpio_get_value(GPIO_PORT40);
+
+	gpio_request(GPIO_FN_IRQ28_123, NULL);	/* for QHD */
+	gpio_request(GPIO_FN_IRQ7_40, NULL);	/* for WVGA */
+
+	return val1 ^ val2;
+}
+
+#define PORT40CR	0xE6051028
+#define PORT123CR	0xE605007B
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_IRQ28_123, NULL);	/* for QHD */
+	gpio_request(GPIO_FN_IRQ7_40, NULL);	/* for WVGA */
+
+	gpio_pull_up(PORT40CR);
+	gpio_pull_up(PORT123CR);
+
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info tsc_device = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	/*.irq is selected on ap4evb_init */
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x13),
+	},
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
 };
 
 static struct map_desc ap4evb_io_desc[] __initdata = {
@@ -250,14 +818,18 @@ static void __init ap4evb_map_io(void)
 {
 	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
 
-	/* setup early devices, clocks and console here as well */
+	/* setup early devices and console here as well */
 	sh7372_add_early_devices();
-	sh7367_clock_init(); /* use g3 clocks for now */
 	shmobile_setup_console();
 }
 
+#define GPIO_PORT9CR	0xE6051009
+#define GPIO_PORT10CR	0xE605100A
 static void __init ap4evb_init(void)
 {
+	u32 srcr4;
+	struct clk *clk;
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -296,6 +868,93 @@ static void __init ap4evb_init(void)
 	gpio_export(GPIO_PORT34, 0);
 	gpio_export(GPIO_PORT35, 0);
 
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+	/* SDHI1 */
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+
+	/* MMCIF */
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCCMD0, NULL);
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+
+	/* USB enable */
+	gpio_request(GPIO_FN_VBUS0_1,    NULL);
+	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
+	gpio_request(GPIO_FN_PWEN_1_115, NULL);
+	gpio_request(GPIO_FN_OVCN_1_114, NULL);
+	gpio_request(GPIO_FN_EXTLP_1,    NULL);
+	gpio_request(GPIO_FN_OVCN2_1,    NULL);
+
+	/* setup USB phy */
+	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
+
+	/* enable FSI2 */
+	gpio_request(GPIO_FN_FSIAIBT,	NULL);
+	gpio_request(GPIO_FN_FSIAILR,	NULL);
+	gpio_request(GPIO_FN_FSIAISLD,	NULL);
+	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	gpio_request(GPIO_PORT161,	NULL);
+	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+	gpio_request(GPIO_PORT9, NULL);
+	gpio_request(GPIO_PORT10, NULL);
+	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+	/* set SPU2 clock to 119.6 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 119600000));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI A */
+	clk = clk_get(NULL, "fsia_clk");
+	if (!IS_ERR(clk)) {
+		clk_register(&fsiackcr_clk);
+		clk_set_parent(clk, &fsiackcr_clk);
+		clk_put(clk);
+	}
+
+	/*
+	 * set irq priority, to avoid sound chopping
+	 * when NFS rootfs is used
+	 *  FSI(3) > SMSC911X(2)
+	 */
+	intc_set_priority(IRQ_FSI, 3);
+
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+#ifdef CONFIG_AP4EVB_QHD
+	/*
+	 * QHD
+	 */
+
 	/* enable KEYSC */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
 	gpio_request(GPIO_FN_KEYOUT1, NULL);
@@ -308,26 +967,122 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_KEYIN3_133, NULL);
 	gpio_request(GPIO_FN_KEYIN4,     NULL);
 
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
+	/* enable TouchScreen */
+	set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
+
+	tsc_device.irq = IRQ28;
+	i2c_register_board_info(1, &tsc_device, 1);
+
+	/* LCDC0 */
+	lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+	lcdc_info.ch[0].interface_type		= RGB24;
+	lcdc_info.ch[0].clock_divider		= 1;
+	lcdc_info.ch[0].flags			= LCDC_FLAGS_DWPOL;
+	lcdc_info.ch[0].lcd_cfg.name		= "R63302(QHD)";
+	lcdc_info.ch[0].lcd_cfg.xres		= 544;
+	lcdc_info.ch[0].lcd_cfg.yres		= 961;
+	lcdc_info.ch[0].lcd_cfg.left_margin	= 72;
+	lcdc_info.ch[0].lcd_cfg.right_margin	= 600;
+	lcdc_info.ch[0].lcd_cfg.hsync_len	= 16;
+	lcdc_info.ch[0].lcd_cfg.upper_margin	= 8;
+	lcdc_info.ch[0].lcd_cfg.lower_margin	= 8;
+	lcdc_info.ch[0].lcd_cfg.vsync_len	= 2;
+	lcdc_info.ch[0].lcd_cfg.sync		= FB_SYNC_VERT_HIGH_ACT |
+						  FB_SYNC_HOR_HIGH_ACT;
+	lcdc_info.ch[0].lcd_size_cfg.width	= 44;
+	lcdc_info.ch[0].lcd_size_cfg.height	= 79;
+
+	platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
+
+#else
+	/*
+	 * WVGA
+	 */
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+
+	gpio_request(GPIO_PORT189, NULL); /* backlight */
+	gpio_direction_output(GPIO_PORT189, 1);
+
+	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT151, 1);
+
+	lcdc_info.clock_source			= LCDC_CLK_BUS;
+	lcdc_info.ch[0].interface_type		= RGB18;
+	lcdc_info.ch[0].clock_divider		= 2;
+	lcdc_info.ch[0].flags			= 0;
+	lcdc_info.ch[0].lcd_cfg.name		= "WVGA Panel";
+	lcdc_info.ch[0].lcd_cfg.xres		= 800;
+	lcdc_info.ch[0].lcd_cfg.yres		= 480;
+	lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+	lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+	lcdc_info.ch[0].lcd_cfg.hsync_len	= 70;
+	lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+	lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+	lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+	lcdc_info.ch[0].lcd_cfg.sync		= 0;
+	lcdc_info.ch[0].lcd_size_cfg.width	= 152;
+	lcdc_info.ch[0].lcd_size_cfg.height	= 91;
+
+	/* enable TouchScreen */
+	set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
+
+	tsc_device.irq = IRQ7;
+	i2c_register_board_info(0, &tsc_device, 1);
+#endif /* CONFIG_AP4EVB_QHD */
 
 	sh7372_add_standard_devices();
 
+	/* HDMI */
+	gpio_request(GPIO_FN_HDMI_HPD, NULL);
+	gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
+	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
+#define SRCR4 0xe61580bc
+	srcr4 = __raw_readl(SRCR4);
+	__raw_writel(srcr4 | (1 << 13), SRCR4);
+	udelay(50);
+	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
+
 	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
 }
 
+static void __init ap4evb_timer_init(void)
+{
+	sh7372_clock_init();
+	shmobile_timer.init();
+
+	/* External clock source */
+	clk_set_rate(&dv_clki_clk, 27000000);
+}
+
+static struct sys_timer ap4evb_timer = {
+	.init		= ap4evb_timer_init,
+};
+
 MACHINE_START(AP4EVB, "ap4evb")
 	.phys_io	= 0xe6000000,
 	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= ap4evb_map_io,
 	.init_irq	= sh7372_init_irq,
 	.init_machine	= ap4evb_init,
-	.timer		= &shmobile_timer,
+	.timer		= &ap4evb_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 9247503..a552590 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -37,6 +37,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * IrDA
+ *
+ * S67: 5bit : ON  power
+ *    : 6bit : ON  remote control
+ *             OFF IrDA
+ */
 
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -91,7 +100,7 @@ static struct platform_device nor_flash_device = {
 };
 
 /* USBHS */
-void usb_host_port_power(int port, int power)
+static void usb_host_port_power(int port, int power)
 {
 	if (!power) /* only power-on supported for now */
 		return;
@@ -113,7 +122,7 @@ static struct resource usb_host_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 65,
+		.start	= evt2irq(0xa20), /* USBHS_USHI0 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -153,7 +162,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0xbe0), /* KEYSC_KEY */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -209,11 +218,31 @@ static struct platform_device nand_flash_device = {
 	},
 };
 
+static struct resource irda_resources[] = {
+	[0] = {
+		.start	= 0xE6D00000,
+		.end	= 0xE6D01FD4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480), /* IRDA */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name		= "sh_irda",
+	.id		= -1,
+	.resource	= irda_resources,
+	.num_resources	= ARRAY_SIZE(irda_resources),
+};
+
 static struct platform_device *g3evm_devices[] __initdata = {
 	&nor_flash_device,
 	&usb_host_device,
 	&keysc_device,
 	&nand_flash_device,
+	&irda_device,
 };
 
 static struct map_desc g3evm_io_desc[] __initdata = {
@@ -232,9 +261,8 @@ static void __init g3evm_map_io(void)
 {
 	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
 
-	/* setup early devices, clocks and console here as well */
+	/* setup early devices and console here as well */
 	sh7367_add_early_devices();
-	sh7367_clock_init();
 	shmobile_setup_console();
 }
 
@@ -271,9 +299,6 @@ static void __init g3evm_init(void)
 	gpio_request(GPIO_FN_EXTLP, NULL);
 	gpio_request(GPIO_FN_IDIN, NULL);
 
-	/* enable clock in SYMSTPCR2 */
-	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
-
 	/* setup USB phy */
 	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
 	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
@@ -318,16 +343,32 @@ static void __init g3evm_init(void)
 	/* FOE, FCDE, FSC on dedicated pins */
 	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
 
+	/* IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN, NULL);
+	gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
+	set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW);
+
 	sh7367_add_standard_devices();
 
 	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
 }
 
+static void __init g3evm_timer_init(void)
+{
+	sh7367_clock_init();
+	shmobile_timer.init();
+}
+
+static struct sys_timer g3evm_timer = {
+	.init		= g3evm_timer_init,
+};
+
 MACHINE_START(G3EVM, "g3evm")
 	.phys_io	= 0xe6000000,
 	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= g3evm_map_io,
 	.init_irq	= sh7367_init_irq,
 	.init_machine	= g3evm_init,
-	.timer		= &shmobile_timer,
+	.timer		= &g3evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 10673a9..2c3ff6f 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -30,12 +30,39 @@
 #include <linux/io.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * SDHI
+ *
+ * SDHI0 : card detection is possible
+ * SDHI1 : card detection is impossible
+ *
+ * [G4-MAIN-BOARD]
+ * JP74 : short		# DBG_2V8A    for SDHI0
+ * JP75 : NC		# DBG_3V3A    for SDHI0
+ * JP76 : NC		# DBG_3V3A_SD for SDHI0
+ * JP77 : NC		# 3V3A_SDIO   for SDHI1
+ * JP78 : short		# DBG_2V8A    for SDHI1
+ * JP79 : NC		# DBG_3V3A    for SDHI1
+ * JP80 : NC		# DBG_3V3A_SD for SDHI1
+ *
+ * [G4-CORE-BOARD]
+ * S32 : all off	# to dissever from G3-CORE_DBG board
+ * S33 : all off	# to dissever from G3-CORE_DBG board
+ *
+ * [G3-CORE_DBG-BOARD]
+ * S1  : all off	# to dissever from G3-CORE_DBG board
+ * S3  : all off	# to dissever from G3-CORE_DBG board
+ * S4  : all off	# to dissever from G3-CORE_DBG board
+ */
 
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -90,7 +117,7 @@ static struct platform_device nor_flash_device = {
 };
 
 /* USBHS */
-void usb_host_port_power(int port, int power)
+static void usb_host_port_power(int port, int power)
 {
 	if (!power) /* only power-on supported for now */
 		return;
@@ -112,8 +139,7 @@ static struct resource usb_host_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 65,
-		.end	= 65,
+		.start	= evt2irq(0x0a20), /* USBHS_USHI0 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -154,7 +180,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -169,10 +195,53 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SDHI */
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6d50000,
+		.end    = 0xe6d501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e00), /* SDHI0 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0xe6d60000,
+		.end    = 0xe6d601ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e80), /* SDHI1 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+};
+
 static struct platform_device *g4evm_devices[] __initdata = {
 	&nor_flash_device,
 	&usb_host_device,
 	&keysc_device,
+	&sdhi0_device,
+	&sdhi1_device,
 };
 
 static struct map_desc g4evm_io_desc[] __initdata = {
@@ -191,12 +260,41 @@ static void __init g4evm_map_io(void)
 {
 	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
 
-	/* setup early devices, clocks and console here as well */
+	/* setup early devices and console here as well */
 	sh7377_add_early_devices();
-	sh7367_clock_init(); /* use g3 clocks for now */
 	shmobile_setup_console();
 }
 
+#define GPIO_SDHID0_D0	0xe60520fc
+#define GPIO_SDHID0_D1	0xe60520fd
+#define GPIO_SDHID0_D2	0xe60520fe
+#define GPIO_SDHID0_D3	0xe60520ff
+#define GPIO_SDHICMD0	0xe6052100
+
+#define GPIO_SDHID1_D0	0xe6052103
+#define GPIO_SDHID1_D1	0xe6052104
+#define GPIO_SDHID1_D2	0xe6052105
+#define GPIO_SDHID1_D3	0xe6052106
+#define GPIO_SDHICMD1	0xe6052107
+
+/*
+ * FIXME !!
+ *
+ * gpio_pull_up is quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_pull_up(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xC0;
+	__raw_writeb(data, addr);
+}
+
 static void __init g4evm_init(void)
 {
 	sh7377_pinmux_init();
@@ -229,9 +327,6 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_EXTLP, NULL);
 	gpio_request(GPIO_FN_IDIN, NULL);
 
-	/* enable clock in SMSTPCR3 */
-	__raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
-
 	/* setup USB phy */
 	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
 	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
@@ -253,16 +348,54 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
 	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
 
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_pull_up(GPIO_SDHID0_D0);
+	gpio_pull_up(GPIO_SDHID0_D1);
+	gpio_pull_up(GPIO_SDHID0_D2);
+	gpio_pull_up(GPIO_SDHID0_D3);
+	gpio_pull_up(GPIO_SDHICMD0);
+
+	/* SDHI1 */
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_pull_up(GPIO_SDHID1_D0);
+	gpio_pull_up(GPIO_SDHID1_D1);
+	gpio_pull_up(GPIO_SDHID1_D2);
+	gpio_pull_up(GPIO_SDHID1_D3);
+	gpio_pull_up(GPIO_SDHICMD1);
+
 	sh7377_add_standard_devices();
 
 	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
 }
 
+static void __init g4evm_timer_init(void)
+{
+	sh7377_clock_init();
+	shmobile_timer.init();
+}
+
+static struct sys_timer g4evm_timer = {
+	.init		= g4evm_timer_init,
+};
+
 MACHINE_START(G4EVM, "g4evm")
 	.phys_io	= 0xe6000000,
 	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= g4evm_map_io,
 	.init_irq	= sh7377_init_irq,
 	.init_machine	= g4evm_init,
-	.timer		= &shmobile_timer,
+	.timer		= &g4evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index bb940c6..b6454c9 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -1,5 +1,5 @@
 /*
- * Preliminary clock framework support for sh7367
+ * SH7367 clock framework support
  *
  * Copyright (C) 2010  Magnus Damm
  *
@@ -17,87 +17,342 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7367 registers */
+#define RTFRQCR    0xe6150000
+#define SYFRQCR    0xe6150004
+#define CMFRQCR    0xe61500E0
+#define VCLKCR1    0xe6150008
+#define VCLKCR2    0xe615000C
+#define VCLKCR3    0xe615001C
+#define SCLKACR    0xe6150010
+#define SCLKBCR    0xe6150014
+#define SUBUSBCKCR 0xe6158080
+#define SPUCKCR    0xe6150084
+#define MSUCKCR    0xe6150088
+#define MVI3CKCR   0xe6150090
+#define VOUCKCR    0xe6150094
+#define MFCK1CR    0xe6150098
+#define MFCK2CR    0xe615009C
+#define PLLC1CR    0xe6150028
+#define PLLC2CR    0xe615002C
+#define RTMSTPCR0  0xe6158030
+#define RTMSTPCR2  0xe6158038
+#define SYMSTPCR0  0xe6158040
+#define SYMSTPCR2  0xe6158048
+#define CMMSTPCR0  0xe615804c
 
-struct clk {
-	const char *name;
-	unsigned long rate;
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
 };
 
-#include <asm/clkdev.h>
+/*
+ * 26MHz default rate for the EXTALB1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7367_extalb1_clk = {
+	.rate		= 26666666,
+};
 
-int __clk_get(struct clk *clk)
-{
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7367_extal2_clk = {
+	.rate		= 48000000,
+};
 
-void __clk_put(struct clk *clk)
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
 {
+	return clk->parent->rate / 2;
 }
-EXPORT_SYMBOL(__clk_put);
 
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide extalb1 by two */
+static struct clk extalb1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7367_extalb1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7367_extal2_clk,
+};
 
-int clk_enable(struct clk *clk)
+/* PLLC1 */
+static unsigned long pllc1_recalc(struct clk *clk)
 {
-	return 0;
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC1CR) & (1 << 14))
+		mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
 }
-EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static struct clk_ops pllc1_clk_ops = {
+	.recalc		= pllc1_recalc,
+};
+
+static struct clk pllc1_clk = {
+	.ops		= &pllc1_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalb1_div2_clk,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pllc1_clk,
+};
+
+/* PLLC2 */
+static unsigned long pllc2_recalc(struct clk *clk)
 {
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC2CR) & (1 << 31))
+		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
 }
-EXPORT_SYMBOL(clk_disable);
 
-unsigned long clk_get_rate(struct clk *clk)
+static struct clk_ops pllc2_clk_ops = {
+	.recalc		= pllc2_recalc,
+};
+
+static struct clk pllc2_clk = {
+	.ops		= &pllc2_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalb1_div2_clk,
+};
+
+static struct clk *main_clks[] = {
+	&r_clk,
+	&sh7367_extalb1_clk,
+	&sh7367_extal2_clk,
+	&extalb1_div2_clk,
+	&extal2_div2_clk,
+	&pllc1_clk,
+	&pllc1_div2_clk,
+	&pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
 {
-	return clk ? clk->rate : 0;
+	unsigned long value;
+
+	/* set KICK bit in SYFRQCR to update hardware setting */
+	value = __raw_readl(SYFRQCR);
+	value |= (1 << 31);
+	__raw_writel(value, SYFRQCR);
 }
-EXPORT_SYMBOL(clk_get_rate);
 
-/* a static peripheral clock for now - enough to get sh-sci working */
-static struct clk peripheral_clk = {
-	.name	    = "peripheral_clk",
-	.rate	    = 48000000,
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 32, 36, 48, 0, 72, 0, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
 };
 
-/* a static rclk for now - enough to get sh_cmt working */
-static struct clk r_clk = {
-	.name	    = "r_clk",
-	.rate	    = 32768,
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B,
+       DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP,
+       DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0),
+	[DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
+	[DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
+	[DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0),
+	[DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
+	[DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
+	[DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
+	[DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
+	[DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
 };
 
-/* a static usb0 for now - enough to get r8a66597 working */
-static struct clk usb0_clk = {
-	.name	    = "usb0",
+enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU,
+       DIV6_MVI3, DIV6_MF1, DIV6_MF2,
+       DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU,
+       DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0),
+	[DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0),
+	[DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0),
+	[DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
+	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+	[DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
+	[DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
+	[DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
+	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+	[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
 };
 
-/* a static keysc0 clk for now - enough to get sh_keysc working */
-static struct clk keysc0_clk = {
-	.name	    = "keysc0",
+enum { RTMSTP001,
+       RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226,
+       RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201,
+       SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004,
+       SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000,
+       SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222,
+       SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211,
+       CMMSTP003,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */
+	[RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */
+	[RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */
+	[RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */
+	[RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */
+	[RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */
+	[RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */
+	[RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */
+	[RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */
+	[RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */
+	[SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */
+	[SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */
+	[SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */
+	[SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */
+	[SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */
+	[SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */
+	[SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */
+	[SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */
+	[SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */
+	[SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */
+	[SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */
+	[SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */
+	[SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */
+	[SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */
+	[SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */
+	[SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */
+	[SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */
+	[CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
 static struct clk_lookup lookups[] = {
-	{
-		.clk = &peripheral_clk,
-	}, {
-		.clk = &r_clk,
-	}, {
-		.clk = &usb0_clk,
-	}, {
-		.clk = &keysc0_clk,
-	}
+	/* main clocks */
+	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk),
+	CLKDEV_CON_ID("extal2", &sh7367_extal2_clk),
+	CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk),
+	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]),
+	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
+	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+	CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
+	CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]),
+	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+	CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
+	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+	CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]),
+	CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+	CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
+	CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
+	CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
+	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */
+	CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */
+	CLKDEV_CON_ID("cmt1", &mstp_clks[SYMSTP229]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */
+	CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */
 };
 
 void __init sh7367_clock_init(void)
 {
-	int i;
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
-		lookups[i].con_id = lookups[i].clk->name;
-		clkdev_add(&lookups[i]);
-	}
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh7367 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
new file mode 100644
index 0000000..fb4e9b1
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -0,0 +1,560 @@
+/*
+ * SH7372 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7372 registers */
+#define FRQCRA		0xe6150000
+#define FRQCRB		0xe6150004
+#define FRQCRC		0xe61500e0
+#define FRQCRD		0xe61500e4
+#define VCLKCR1		0xe6150008
+#define VCLKCR2		0xe615000c
+#define VCLKCR3		0xe615001c
+#define FMSICKCR	0xe6150010
+#define FMSOCKCR	0xe6150014
+#define FSIACKCR	0xe6150018
+#define FSIBCKCR	0xe6150090
+#define SUBCKCR		0xe6150080
+#define SPUCKCR		0xe6150084
+#define VOUCKCR		0xe6150088
+#define HDMICKCR	0xe6150094
+#define DSITCKCR	0xe6150060
+#define DSI0PCKCR	0xe6150064
+#define DSI1PCKCR	0xe6150098
+#define PLLC01CR	0xe6150028
+#define PLLC2CR		0xe615002c
+#define SMSTPCR0	0xe6150130
+#define SMSTPCR1	0xe6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xe615013c
+#define SMSTPCR4	0xe6150140
+
+/* Platforms must set frequency on their DV_CLKI pin */
+struct clk dv_clki_clk = {
+};
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7372_extal1_clk = {
+	.rate		= 26000000,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7372_extal2_clk = {
+	.rate		= 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide dv_clki by two */
+struct clk dv_clki_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &dv_clki_clk,
+};
+
+/* Divide extal1 by two */
+static struct clk extal1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7372_extal1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7372_extal2_clk,
+};
+
+/* Divide extal2 by four */
+static struct clk extal2_div4_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &extal2_div2_clk,
+};
+
+/* PLLC0 and PLLC1 */
+static unsigned long pllc01_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC01CR) & (1 << 14))
+		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc01_clk_ops = {
+	.recalc		= pllc01_recalc,
+};
+
+static struct clk pllc0_clk = {
+	.ops		= &pllc01_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extal1_div2_clk,
+	.enable_reg	= (void __iomem *)FRQCRC,
+};
+
+static struct clk pllc1_clk = {
+	.ops		= &pllc01_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extal1_div2_clk,
+	.enable_reg	= (void __iomem *)FRQCRA,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pllc1_clk,
+};
+
+/* PLLC2 */
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *pllc2_parent[] = {
+	[0] = &extal1_div2_clk,
+	[1] = &extal2_div2_clk,
+	[2] = &dv_clki_div2_clk,
+};
+
+/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
+static struct cpufreq_frequency_table pllc2_freq_table[29];
+
+static void pllc2_table_rebuild(struct clk *clk)
+{
+	int i;
+
+	/* Initialise PLLC2 frequency table */
+	for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) {
+		pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2;
+		pllc2_freq_table[i].index = i;
+	}
+
+	/* This is a special entry - switching PLL off makes it a repeater */
+	pllc2_freq_table[i].frequency = clk->parent->rate;
+	pllc2_freq_table[i].index = i;
+
+	pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END;
+	pllc2_freq_table[i].index = i;
+}
+
+static unsigned long pllc2_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	pllc2_table_rebuild(clk);
+
+	/*
+	 * If the PLL is off, mult == 1, clk->rate will be updated in
+	 * pllc2_enable().
+	 */
+	if (__raw_readl(PLLC2CR) & (1 << 31))
+		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static long pllc2_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_table_round(clk, clk->freq_table, rate);
+}
+
+static int pllc2_enable(struct clk *clk)
+{
+	int i;
+
+	__raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR);
+
+	for (i = 0; i < 100; i++)
+		if (__raw_readl(PLLC2CR) & 0x80000000) {
+			clk->rate = pllc2_recalc(clk);
+			return 0;
+		}
+
+	pr_err("%s(): timeout!\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static void pllc2_disable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
+}
+
+static int pllc2_set_rate(struct clk *clk,
+			  unsigned long rate, int algo_id)
+{
+	unsigned long value;
+	int idx;
+
+	idx = clk_rate_table_find(clk, clk->freq_table, rate);
+	if (idx < 0)
+		return idx;
+
+	if (rate == clk->parent->rate) {
+		pllc2_disable(clk);
+		return 0;
+	}
+
+	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
+
+	if (value & 0x80000000)
+		pllc2_disable(clk);
+
+	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
+
+	if (value & 0x80000000)
+		return pllc2_enable(clk);
+
+	return 0;
+}
+
+static int pllc2_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 value;
+	int ret, i;
+
+	if (!clk->parent_table || !clk->parent_num)
+		return -EINVAL;
+
+	/* Search the parent */
+	for (i = 0; i < clk->parent_num; i++)
+		if (clk->parent_table[i] == parent)
+			break;
+
+	if (i == clk->parent_num)
+		return -ENODEV;
+
+	ret = clk_reparent(clk, parent);
+	if (ret < 0)
+		return ret;
+
+	value = __raw_readl(PLLC2CR) & ~(3 << 6);
+
+	__raw_writel(value | (i << 6), PLLC2CR);
+
+	/* Rebiuld the frequency table */
+	pllc2_table_rebuild(clk);
+
+	return 0;
+}
+
+static struct clk_ops pllc2_clk_ops = {
+	.recalc		= pllc2_recalc,
+	.round_rate	= pllc2_round_rate,
+	.set_rate	= pllc2_set_rate,
+	.enable		= pllc2_enable,
+	.disable	= pllc2_disable,
+	.set_parent	= pllc2_set_parent,
+};
+
+struct clk pllc2_clk = {
+	.ops		= &pllc2_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extal1_div2_clk,
+	.freq_table	= pllc2_freq_table,
+	.parent_table	= pllc2_parent,
+	.parent_num	= ARRAY_SIZE(pllc2_parent),
+};
+
+static struct clk *main_clks[] = {
+	&dv_clki_clk,
+	&r_clk,
+	&sh7372_extal1_clk,
+	&sh7372_extal2_clk,
+	&dv_clki_div2_clk,
+	&extal1_div2_clk,
+	&extal2_div2_clk,
+	&extal2_div4_clk,
+	&pllc0_clk,
+	&pllc1_clk,
+	&pllc1_div2_clk,
+	&pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in FRQCRB to update hardware setting */
+	value = __raw_readl(FRQCRB);
+	value |= (1 << 31);
+	__raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
+       DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
+       DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
+       DIV4_DDRP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
+	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
+	[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
+	[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
+	[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
+	[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
+	[DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0),
+	[DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0),
+	[DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0),
+	[DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0),
+	[DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
+       DIV6_FSIA, DIV6_FSIB, DIV6_SUB, DIV6_SPU,
+       DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
+       DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+	[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
+	[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
+	[DIV6_FSIA] = SH_CLK_DIV6(&pllc1_div2_clk, FSIACKCR, 0),
+	[DIV6_FSIB] = SH_CLK_DIV6(&pllc1_div2_clk, FSIBCKCR, 0),
+	[DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
+	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+	[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
+	[DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
+	[DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0),
+	[DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
+};
+
+enum { DIV6_HDMI, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *hdmi_parent[] = {
+	[0] = &pllc1_div2_clk,
+	[1] = &pllc2_clk,
+	[2] = &dv_clki_clk,
+	[3] = NULL,	/* pllc2_div4 not implemented yet */
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+	[DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0,
+				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
+};
+
+enum { MSTP001,
+       MSTP131, MSTP130,
+       MSTP129, MSTP128,
+       MSTP118, MSTP117, MSTP116,
+       MSTP106, MSTP101, MSTP100,
+       MSTP223,
+       MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+       MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
+	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
+	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
+	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
+	[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
+	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
+	[MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
+	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
+	[MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
+	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
+	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
+	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
+	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
+	[MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */
+	[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
+	[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
+	[MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
+	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("dv_clki_div2_clk", &dv_clki_div2_clk),
+	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
+	CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
+	CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk),
+	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+	CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
+	CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
+	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
+	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
+	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
+	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+	CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
+	CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
+	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+	CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
+	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
+	CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FSIA]),
+	CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FSIB]),
+	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
+	CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
+	CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
+	CLKDEV_CON_ID("dsi0p_clk", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_CON_ID("dsi1p_clk", &div6_clks[DIV6_DSI1P]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+	CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
+	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
+	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
+	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+	{.con_id = "ick", .dev_id = "sh-mobile-hdmi", .clk = &div6_reparent_clks[DIV6_HDMI]},
+};
+
+void __init sh7372_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh7372 clocks\n");
+
+}
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
new file mode 100644
index 0000000..e007c28
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -0,0 +1,369 @@
+/*
+ * SH7377 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7377 registers */
+#define RTFRQCR    0xe6150000
+#define SYFRQCR    0xe6150004
+#define CMFRQCR    0xe61500E0
+#define VCLKCR1    0xe6150008
+#define VCLKCR2    0xe615000C
+#define VCLKCR3    0xe615001C
+#define FMSICKCR   0xe6150010
+#define FMSOCKCR   0xe6150014
+#define FSICKCR    0xe6150018
+#define PLLC1CR    0xe6150028
+#define PLLC2CR    0xe615002C
+#define SUBUSBCKCR 0xe6150080
+#define SPUCKCR    0xe6150084
+#define MSUCKCR    0xe6150088
+#define MVI3CKCR   0xe6150090
+#define HDMICKCR   0xe6150094
+#define MFCK1CR    0xe6150098
+#define MFCK2CR    0xe615009C
+#define DSITCKCR   0xe6150060
+#define DSIPCKCR   0xe6150064
+#define SMSTPCR0   0xe6150130
+#define SMSTPCR1   0xe6150134
+#define SMSTPCR2   0xe6150138
+#define SMSTPCR3   0xe615013C
+#define SMSTPCR4   0xe6150140
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTALC1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7377_extalc1_clk = {
+	.rate		= 26666666,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7377_extal2_clk = {
+	.rate		= 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide extalc1 by two */
+static struct clk extalc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7377_extalc1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7377_extal2_clk,
+};
+
+/* Divide extal2 by four */
+static struct clk extal2_div4_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &extal2_div2_clk,
+};
+
+/* PLLC1 */
+static unsigned long pllc1_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC1CR) & (1 << 14))
+		mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc1_clk_ops = {
+	.recalc		= pllc1_recalc,
+};
+
+static struct clk pllc1_clk = {
+	.ops		= &pllc1_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalc1_div2_clk,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pllc1_clk,
+};
+
+/* PLLC2 */
+static unsigned long pllc2_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC2CR) & (1 << 31))
+		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc2_clk_ops = {
+	.recalc		= pllc2_recalc,
+};
+
+static struct clk pllc2_clk = {
+	.ops		= &pllc2_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalc1_div2_clk,
+};
+
+static struct clk *main_clks[] = {
+	&r_clk,
+	&sh7377_extalc1_clk,
+	&sh7377_extal2_clk,
+	&extalc1_div2_clk,
+	&extal2_div2_clk,
+	&extal2_div4_clk,
+	&pllc1_clk,
+	&pllc1_div2_clk,
+	&pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in SYFRQCR to update hardware setting */
+	value = __raw_readl(SYFRQCR);
+	value |= (1 << 31);
+	__raw_writel(value, SYFRQCR);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
+       DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP,
+       DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0),
+	[DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0),
+	[DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
+	[DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
+	[DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
+	[DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
+	[DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
+	[DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
+	[DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
+       DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI,
+       DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP,
+       DIV6_NR };
+
+static struct clk div6_clks[] = {
+	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+	[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
+	[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
+	[DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0),
+	[DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0),
+	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+	[DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
+	[DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
+	[DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0),
+	[DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
+	[DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
+	[DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
+	[DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0),
+};
+
+enum { MSTP001,
+       MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101,
+       MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP331, MSTP329, MSTP325, MSTP323, MSTP322,
+       MSTP315, MSTP314, MSTP313,
+       MSTP403,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[] = {
+	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
+	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
+	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
+	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
+	[MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
+	[MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
+	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
+	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */
+	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+	[MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */
+	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
+	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
+	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk),
+	CLKDEV_CON_ID("extal2", &sh7377_extal2_clk),
+	CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk),
+	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+	CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
+	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
+	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
+	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+	CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
+	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+	CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
+	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
+	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
+	CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]),
+	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+	CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
+	CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
+	CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]),
+	CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
+	CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
+	CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
+	CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+	CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */
+	CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+};
+
+void __init sh7377_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh7377 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
new file mode 100644
index 0000000..b7c705a
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock.c
@@ -0,0 +1,44 @@
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sh_clk.h>
+
+int __init clk_init(void)
+{
+	/* Kick the child clocks.. */
+	recalculate_root_clocks();
+
+	/* Enable the necessary init clocks */
+	clk_enable_init_clocks();
+
+	return 0;
+}
+
+int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 5790360..efeef77 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,21 +3,31 @@
 
 extern struct sys_timer shmobile_timer;
 extern void shmobile_setup_console(void);
+struct clk;
+extern int clk_init(void);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);
 extern void sh7367_add_standard_devices(void);
 extern void sh7367_clock_init(void);
 extern void sh7367_pinmux_init(void);
+extern struct clk sh7367_extalb1_clk;
+extern struct clk sh7367_extal2_clk;
 
 extern void sh7377_init_irq(void);
 extern void sh7377_add_early_devices(void);
 extern void sh7377_add_standard_devices(void);
+extern void sh7377_clock_init(void);
 extern void sh7377_pinmux_init(void);
+extern struct clk sh7377_extalc1_clk;
+extern struct clk sh7377_extal2_clk;
 
 extern void sh7372_init_irq(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
+extern void sh7372_clock_init(void);
 extern void sh7372_pinmux_init(void);
+extern struct clk sh7372_extal1_clk;
+extern struct clk sh7372_extal2_clk;
 
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 132256b..fa15b5f 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -3,7 +3,13 @@
 
 #define NR_IRQS         512
 
+/* INTCA */
 #define evt2irq(evt)		(((evt) >> 5) - 16)
 #define irq2evt(irq)		(((irq) + 16) << 5)
 
+/* INTCS */
+#define INTCS_VECT_BASE		0x2200
+#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
+
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index e188183..377584e 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,4 +4,7 @@
 #define PHYS_OFFSET	UL(CONFIG_MEMORY_START)
 #define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
 
+/* DMA memory at 0xf6000000 - 0xffdfffff */
+#define CONSISTENT_DMA_SIZE (158 << 20)
+
 #endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index dc34f00..33e9700 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_SH7372_H__
 #define __ASM_SH7372_H__
 
+#include <linux/sh_clk.h>
+
 /*
  * Pin Function Controller:
  *	GPIO_FN_xx - GPIO used to select pin function
@@ -431,4 +433,32 @@ enum {
 	GPIO_FN_SDENC_DV_CLKI,
 };
 
+/* DMA slave IDs */
+enum {
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_SCIF5_TX,
+	SHDMA_SLAVE_SCIF5_RX,
+	SHDMA_SLAVE_SCIF6_TX,
+	SHDMA_SLAVE_SCIF6_RX,
+	SHDMA_SLAVE_SDHI0_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI1_RX,
+	SHDMA_SLAVE_SDHI1_TX,
+	SHDMA_SLAVE_SDHI2_RX,
+	SHDMA_SLAVE_SDHI2_TX,
+};
+
+extern struct clk dv_clki_clk;
+extern struct clk dv_clki_div2_clk;
+extern struct clk pllc2_clk;
+
 #endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
index fb3c4f1..4aecf6e 100644
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_MACH_VMALLOC_H
 #define __ASM_MACH_VMALLOC_H
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x24000000)
+/* Vmalloc at ... - 0xe5ffffff */
+#define VMALLOC_END 0xe6000000
 
 #endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
index 5ff70cad..1a20c48 100644
--- a/arch/arm/mach-shmobile/intc-sh7367.c
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -75,7 +75,7 @@ enum {
 	ETM11, ARM11, USBHS, FLCTL, IIC1
 };
 
-static struct intc_vect intca_vectors[] = {
+static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
 	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
 	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
@@ -162,7 +162,7 @@ static struct intc_group intca_groups[] __initdata = {
 	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
 };
 
-static struct intc_mask_reg intca_mask_registers[] = {
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
 	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
@@ -211,7 +211,7 @@ static struct intc_mask_reg intca_mask_registers[] = {
 	    MISTY, CMT3, RWDT1, RWDT0 } },
 };
 
-static struct intc_prio_reg intca_prio_registers[] = {
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
 	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
@@ -263,8 +263,178 @@ static struct intc_desc intca_desc __initdata = {
 			   intca_sense_registers, intca_ack_registers),
 };
 
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+	VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3,
+	VIO3_VOU,
+	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+	VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2,
+	VPU,
+	SGX530,
+	_2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUB, IPMMU_IPMMUS,
+	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+	MSIOF,
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT,
+	TSIF,
+	IPMMUI,
+	MVI3,
+	ICB,
+	PEP,
+	ASA,
+	BEM,
+	VE2HO,
+	HQE,
+	JPEG,
+	LCDC,
+
+	/* interrupt groups INTCS */
+	_2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+};
+
+static struct intc_vect intcs_vectors[] = {
+	INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720),
+	INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760),
+	INTCS_VECT(VIO3_VOU, 0x780),
+	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+	INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0),
+	INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0),
+	INTCS_VECT(VPU, 0x980),
+	INTCS_VECT(SGX530, 0x9e0),
+	INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20),
+	INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60),
+	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+	INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60),
+	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+	INTCS_VECT(MSIOF, 0xd20),
+	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+	INTCS_VECT(TMU_TUNI2, 0xec0),
+	INTCS_VECT(CMT, 0xf00),
+	INTCS_VECT(TSIF, 0xf20),
+	INTCS_VECT(IPMMUI, 0xf60),
+	INTCS_VECT(MVI3, 0x420),
+	INTCS_VECT(ICB, 0x480),
+	INTCS_VECT(PEP, 0x4a0),
+	INTCS_VECT(ASA, 0x4c0),
+	INTCS_VECT(BEM, 0x4e0),
+	INTCS_VECT(VE2HO, 0x520),
+	INTCS_VECT(HQE, 0x540),
+	INTCS_VECT(JPEG, 0x560),
+	INTCS_VECT(LCDC, 0x580),
+
+	INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1,
+		   _2DDMAC_2DDM2, _2DDMAC_2DDM3),
+	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+	INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3),
+	INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+	  { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU,
+	    VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } },
+	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+	  { VIO3_VOU, 0, VE2HO, VPU,
+	    0, 0, 0, 0 } },
+	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+	  { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0,
+	    BEM, ASA, PEP, ICB } },
+	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+	  { 0, 0, MVI3, 0,
+	    JPEG, HQE, 0, LCDC } },
+	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+	  { 0, 0, MSIOF, 0,
+	    SGX530, 0, 0, 0 } },
+	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+	  { 0, 0, 0, CMT,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+	  { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, 0, IPMMUI, TSIF } },
+	{ 0xffd20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } },
+	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } },
+	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
+	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } },
+	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } },
+	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+					      TMU_TUNI2, 0 } },
+	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } },
+	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } },
+	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } },
+	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } },
+	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } },
+	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd2ffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7367-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+			   intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
 void __init sh7367_init_irq(void)
 {
-	/* INTCA */
+	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
 }
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 3ce9d9b..e3551b5 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -319,17 +319,17 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = {
 	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
 	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
 					       CMT14, CMT15 } },
-	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+	{ 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
 					       MMC_MMC_ERR, MMC_MMC_NOR } },
-	{ 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+	{ 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
 					       IIC4_WAITI4, IIC4_DTEI4 } },
-	{ 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+	{ 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
 					       IIC3_WAITI3, IIC3_DTEI3 } },
-	{ 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+	{ 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
 					       0/*TXI*/, 0/*TEI*/} },
-	{ 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+	{ 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
 					       USB1_USB1I1, USB1_USB1I0 } },
-	{ 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+	{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
 };
 
 static struct intc_sense_reg intca_sense_registers[] __initdata = {
@@ -363,7 +363,227 @@ static struct intc_desc intca_desc __initdata = {
 			   intca_sense_registers, intca_ack_registers),
 };
 
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+	VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
+	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+	CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
+	VPU,
+	TSIF1,
+	_3DG_SGX530,
+	_2DDMAC,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUR, IPMMU_IPMMUR2,
+	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+	MSIOF,
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT0,
+	TSIF0,
+	LMB,
+	CTI,
+	ICB,
+	JPU_JPEG,
+	LCDC,
+	LCRC,
+	RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+	RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
+	ISP,
+	LCDC1,
+	CSIRX,
+	DSITX_DSITX0,
+	DSITX_DSITX1,
+	TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+	CMT4,
+	DSITX1_DSITX1_0,
+	DSITX1_DSITX1_1,
+	CPORTS2R,
+	JPU6E,
+
+	/* interrupt groups INTCS */
+	RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+	RTDMAC2_1, RTDMAC2_2, TMU1, DSITX,
+};
+
+static struct intc_vect intcs_vectors[] = {
+	INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
+	INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
+	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+	INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
+	INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
+	INTCS_VECT(VPU, 0x980),
+	INTCS_VECT(TSIF1, 0x9a0),
+	INTCS_VECT(_3DG_SGX530, 0x9e0),
+	INTCS_VECT(_2DDMAC, 0xa00),
+	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+	INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
+	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+	INTCS_VECT(TMU_TUNI2, 0xec0),
+	INTCS_VECT(CMT0, 0xf00),
+	INTCS_VECT(TSIF0, 0xf20),
+	INTCS_VECT(LMB, 0xf60),
+	INTCS_VECT(CTI, 0x400),
+	INTCS_VECT(ICB, 0x480),
+	INTCS_VECT(JPU_JPEG, 0x560),
+	INTCS_VECT(LCDC, 0x580),
+	INTCS_VECT(LCRC, 0x5a0),
+	INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
+	INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
+	INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0),
+	INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0),
+	INTCS_VECT(ISP, 0x1720),
+	INTCS_VECT(LCDC1, 0x1780),
+	INTCS_VECT(CSIRX, 0x17a0),
+	INTCS_VECT(DSITX_DSITX0, 0x17c0),
+	INTCS_VECT(DSITX_DSITX1, 0x17e0),
+	INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
+	INTCS_VECT(TMU1_TUNI2, 0x1940),
+	INTCS_VECT(CMT4, 0x1980),
+	INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
+	INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
+	INTCS_VECT(CPORTS2R, 0x1a20),
+	INTCS_VECT(JPU6E, 0x1a80),
+
+	INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+	INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
+	INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+	INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
+		   RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
+	INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4,
+		   RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
+	INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0),
+	INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+	  { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
+	    VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
+	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+	  { 0, 0, 0, VPU,
+	    0, 0, 0, 0 } },
+	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+	  { 0, 0, 0, _2DDMAC,
+	    0, 0, 0, ICB } },
+	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+	  { 0, 0, 0, CTI,
+	    JPU_JPEG, 0, LCRC, LCDC } },
+	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+	  { 0, 0, MSIOF, 0,
+	    _3DG_SGX530, 0, 0, 0 } },
+	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+	  { 0, 0, 0, CMT0,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+	  { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR,
+	    0, 0, 0, 0 } },
+	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, TSIF1, LMB, TSIF0 } },
+	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
+	  { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4,
+	    RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } },
+	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
+	  { 0, ISP, 0, 0,
+	    LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
+	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
+	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+	    CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
+	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
+	  { 0, CPORTS2R, 0, 0,
+	    JPU6E, 0, 0, 0 } },
+	{ 0xffd20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } },
+	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
+	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } },
+	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } },
+	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+					      TMU_TUNI2, TSIF1 } },
+	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
+	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
+	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } },
+	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
+	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
+	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } },
+	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } },
+	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } },
+	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } },
+	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
+	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
+					       DSITX1_DSITX1_1, 0 } },
+	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } },
+	{ 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd201ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0xffd50000,
+		.end	= 0xffd501ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7372-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+			   intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
 void __init sh7372_init_irq(void)
 {
+	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
 }
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
index 5c781e2d1..2cdeb8c 100644
--- a/arch/arm/mach-shmobile/intc-sh7377.c
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -90,7 +90,7 @@ enum {
 	ICUSB, ICUDMC
 };
 
-static struct intc_vect intca_vectors[] = {
+static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
 	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
 	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
@@ -202,7 +202,7 @@ static struct intc_group intca_groups[] __initdata = {
 	INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
 };
 
-static struct intc_mask_reg intca_mask_registers[] = {
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
 	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
@@ -272,7 +272,7 @@ static struct intc_mask_reg intca_mask_registers[] = {
 	    SCIFA6, 0, 0, 0 } },
 };
 
-static struct intc_prio_reg intca_prio_registers[] = {
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
 	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
@@ -346,7 +346,301 @@ static struct intc_desc intca_desc __initdata = {
 			   intca_sense_registers, intca_ack_registers),
 };
 
+/* this macro ignore entry which is also in INTCA */
+#define __IGNORE(a...)
+#define __IGNORE0(a...) 0
+
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+	VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
+	RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3,
+	CEU,
+	BEU_BEU0, BEU_BEU1, BEU_BEU2,
+	__IGNORE(MFI)
+	__IGNORE(BBIF2)
+	VPU,
+	TSIF1,
+	__IGNORE(SGX540)
+	_2DDMAC,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUR, IPMMU_IPMMUR2,
+	RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR,
+	__IGNORE(KEYSC)
+	__IGNORE(TTI20)
+	__IGNORE(MSIOF)
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT0,
+	TSIF0,
+	__IGNORE(CMT2)
+	LMB,
+	__IGNORE(MSUG)
+	__IGNORE(MSU_MSU, MSU_MSU2)
+	__IGNORE(CTI)
+	MVI3,
+	__IGNORE(RWDT0)
+	__IGNORE(RWDT1)
+	ICB,
+	PEP,
+	ASA,
+	__IGNORE(_2DG)
+	HQE,
+	JPU,
+	LCDC0,
+	__IGNORE(LCRC)
+	RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+	RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
+	FRC,
+	LCDC1,
+	CSIRX,
+	DSITX_DSITX0, DSITX_DSITX1,
+	__IGNORE(SPU2_SPU0, SPU2_SPU1)
+	__IGNORE(FSI)
+	__IGNORE(FMSI)
+	__IGNORE(SCUV)
+	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
+	TSIF2,
+	CMT4,
+	__IGNORE(MFIS2)
+	CPORTS2R,
+
+	/* interrupt groups INTCS */
+	RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU,
+	IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1,
+};
+
+#define INTCS_INTVECT 0x0F80
+static struct intc_vect intcs_vectors[] __initdata = {
+	INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720),
+	INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760),
+	INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820),
+	INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860),
+	INTCS_VECT(CEU, 0x0880),
+	INTCS_VECT(BEU_BEU0, 0x08A0),
+	INTCS_VECT(BEU_BEU1, 0x08C0),
+	INTCS_VECT(BEU_BEU2, 0x08E0),
+	__IGNORE(INTCS_VECT(MFI, 0x0900))
+	__IGNORE(INTCS_VECT(BBIF2, 0x0960))
+	INTCS_VECT(VPU, 0x0980),
+	INTCS_VECT(TSIF1, 0x09A0),
+	__IGNORE(INTCS_VECT(SGX540, 0x09E0))
+	INTCS_VECT(_2DDMAC, 0x0A00),
+	INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0),
+	INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0),
+	INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20),
+	INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80),
+	INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0),
+	INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0),
+	__IGNORE(INTCS_VECT(KEYSC 0x0BE0))
+	__IGNORE(INTCS_VECT(TTI20, 0x0C80))
+	__IGNORE(INTCS_VECT(MSIOF, 0x0D20))
+	INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20),
+	INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60),
+	INTCS_VECT(TMU_TUNI0, 0x0E80),
+	INTCS_VECT(TMU_TUNI1, 0x0EA0),
+	INTCS_VECT(TMU_TUNI2, 0x0EC0),
+	INTCS_VECT(CMT0, 0x0F00),
+	INTCS_VECT(TSIF0, 0x0F20),
+	__IGNORE(INTCS_VECT(CMT2, 0x0F40))
+	INTCS_VECT(LMB, 0x0F60),
+	__IGNORE(INTCS_VECT(MSUG, 0x0F80))
+	__IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0))
+	__IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0))
+	__IGNORE(INTCS_VECT(CTI, 0x0400))
+	INTCS_VECT(MVI3, 0x0420),
+	__IGNORE(INTCS_VECT(RWDT0, 0x0440))
+	__IGNORE(INTCS_VECT(RWDT1, 0x0460))
+	INTCS_VECT(ICB, 0x0480),
+	INTCS_VECT(PEP, 0x04A0),
+	INTCS_VECT(ASA, 0x04C0),
+	__IGNORE(INTCS_VECT(_2DG, 0x04E0))
+	INTCS_VECT(HQE, 0x0540),
+	INTCS_VECT(JPU, 0x0560),
+	INTCS_VECT(LCDC0, 0x0580),
+	__IGNORE(INTCS_VECT(LCRC, 0x05A0))
+	INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
+	INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
+	INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0),
+	INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0),
+	INTCS_VECT(FRC, 0x1700),
+	INTCS_VECT(LCDC1, 0x1780),
+	INTCS_VECT(CSIRX, 0x17A0),
+	INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0),
+	__IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800))
+	__IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820))
+	__IGNORE(INTCS_VECT(FSI, 0x1840))
+	__IGNORE(INTCS_VECT(FMSI, 0x1860))
+	__IGNORE(INTCS_VECT(SCUV, 0x1880))
+	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
+	INTCS_VECT(TMU1_TUNI12, 0x1940),
+	INTCS_VECT(TSIF2, 0x1960),
+	INTCS_VECT(CMT4, 0x1980),
+	__IGNORE(INTCS_VECT(MFIS2, 0x1A00))
+	INTCS_VECT(CPORTS2R, 0x1A20),
+
+	INTC_VECT(INTCS, INTCS_INTVECT),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(RTDMAC1_1,
+		   RTDMAC1_1_DEI0, RTDMAC1_1_DEI1,
+		   RTDMAC1_1_DEI2, RTDMAC1_1_DEI3),
+	INTC_GROUP(RTDMAC1_2,
+		   RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR),
+	INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
+	INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	__IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2))
+	INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+	INTC_GROUP(RTDMAC2_1,
+		   RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
+		   RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
+	INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
+	INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
+	__IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1))
+	INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] __initdata = {
+	{ 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS  */
+	  { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
+	    VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
+	{ 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */
+	  { 0, 0, 0, VPU,
+	    __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } },
+	{ 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */
+	  { 0, 0, 0, _2DDMAC,
+	    __IGNORE0(_2DG), ASA, PEP, ICB } },
+	{ 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */
+	  { 0, 0, MVI3, __IGNORE0(CTI),
+	    JPU, HQE, __IGNORE0(LCRC), LCDC0 } },
+	{ 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */
+	  { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4,
+	    RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } },
+	__IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */
+	  { 0, 0, MSIOF, 0,
+	    SGX540, 0, TTI20, 0 } })
+	{ 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	__IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */
+	  { 0, 0, 0, 0,
+	    0, MSU_MSU, MSU_MSU2, MSUG } })
+	{ 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */
+	  { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */
+	  { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2,
+	    0, 0, 0, 0 } },
+	{ 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, TSIF1, LMB, TSIF0 } },
+	{ 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */
+	  { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+	    RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } },
+	{ 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */
+	  { FRC, 0, 0, 0,
+	    LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
+	__IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */
+	  {SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	   SCUV, 0, 0, 0 } })
+	{ 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */
+	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2,
+	    CMT4, 0, 0, 0 } },
+	{ 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */
+	  { __IGNORE0(MFIS2), CPORTS2R, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xFFD20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } }
+};
+
+static struct intc_prio_reg intcs_prio_registers[] __initdata = {
+	/* IPRAS */
+	{ 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } },
+	/* IPRBS */
+	{ 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } },
+	/* IPRCS */
+	__IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } })
+	/* IPRES */
+	{ 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } },
+	/* IPRFS */
+	{ 0xFFD20014, 0, 16, 4,
+	  { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } },
+	/* IPRGS */
+	{ 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } },
+	/* IPRHS */
+	{ 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } },
+	/* IPRIS */
+	{ 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } },
+	/* IPRJS */
+	__IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } })
+	/* IPRKS */
+	{ 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } },
+	/* IPRLS */
+	{ 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } },
+	/* IPRMS */
+	{ 0xFFD20030, 0, 16, 4,
+	  { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } },
+	/* IPRAS3 */
+	{ 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } },
+	/* IPRBS3 */
+	{ 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } },
+	/* IPRIS3 */
+	{ 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } },
+	/* IPRJS3 */
+	{ 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } },
+	/* IPRKS3 */
+	__IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } })
+	/* IPRLS3 */
+	__IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } })
+	/* IPRMS3 */
+	{ 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } },
+	/* IPRNS3 */
+	{ 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } },
+	/* IPROS3 */
+	{ 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd500ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7377-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups,
+			   intcs_mask_registers, intcs_prio_registers,
+			   NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
+#define INTEVTSA 0xFFD20100
 void __init sh7377_init_irq(void)
 {
+	void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(INTCS_INTVECT), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux);
 }
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 9557d09..ec42035 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -1160,6 +1160,9 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(LCDD18),	GPIO_FN(LCDD19),	GPIO_FN(LCDD20),
 	GPIO_FN(LCDD21),	GPIO_FN(LCDD22),	GPIO_FN(LCDD23),
 
+	GPIO_FN(LCDC0_SELECT),
+	GPIO_FN(LCDC1_SELECT),
+
 	/* IRDA */
 	GPIO_FN(IRDA_OUT),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_FIRSEL),
 	GPIO_FN(IROUT_139),	GPIO_FN(IROUT_140),
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index eca9071..3148c11 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -31,11 +31,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs		= { 80, 80, 80, 80 },
+	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
+			    evt2irq(0xc00), evt2irq(0xc00) },
 };
 
 static struct platform_device scif0_device = {
@@ -46,11 +48,13 @@ static struct platform_device scif0_device = {
 	},
 };
 
+/* SCIFA1 */
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xe6c50000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 81, 81, 81, 81 },
+	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
+			    evt2irq(0xc20), evt2irq(0xc20) },
 };
 
 static struct platform_device scif1_device = {
@@ -61,11 +65,13 @@ static struct platform_device scif1_device = {
 	},
 };
 
+/* SCIFA2 */
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xe6c60000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 82, 82, 82, 82 },
+	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
+			    evt2irq(0xc40), evt2irq(0xc40) },
 };
 
 static struct platform_device scif2_device = {
@@ -76,11 +82,13 @@ static struct platform_device scif2_device = {
 	},
 };
 
+/* SCIFA3 */
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xe6c70000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 83, 83, 83, 83 },
+	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
+			    evt2irq(0xc60), evt2irq(0xc60) },
 };
 
 static struct platform_device scif3_device = {
@@ -91,11 +99,13 @@ static struct platform_device scif3_device = {
 	},
 };
 
+/* SCIFA4 */
 static struct plat_sci_port scif4_platform_data = {
 	.mapbase	= 0xe6c80000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 89, 89, 89, 89 },
+	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
+			    evt2irq(0xd20), evt2irq(0xd20) },
 };
 
 static struct platform_device scif4_device = {
@@ -106,11 +116,13 @@ static struct platform_device scif4_device = {
 	},
 };
 
+/* SCIFA5 */
 static struct plat_sci_port scif5_platform_data = {
 	.mapbase	= 0xe6cb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 90, 90, 90, 90 },
+	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
+			    evt2irq(0xd40), evt2irq(0xd40) },
 };
 
 static struct platform_device scif5_device = {
@@ -121,11 +133,13 @@ static struct platform_device scif5_device = {
 	},
 };
 
+/* SCIFB */
 static struct plat_sci_port scif6_platform_data = {
 	.mapbase	= 0xe6c30000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 91, 91, 91, 91 },
+	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
+			    evt2irq(0xd60), evt2irq(0xd60) },
 };
 
 static struct platform_device scif6_device = {
@@ -153,7 +167,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 72,
+		.start	= evt2irq(0xb00), /* CMT1_CMT10 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 1d11532..e26686c 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -26,17 +26,21 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/sh7372.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs		= { 80, 80, 80, 80 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c00), evt2irq(0x0c00),
+			    evt2irq(0x0c00), evt2irq(0x0c00) },
 };
 
 static struct platform_device scif0_device = {
@@ -47,11 +51,13 @@ static struct platform_device scif0_device = {
 	},
 };
 
+/* SCIFA1 */
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xe6c50000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 81, 81, 81, 81 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c20), evt2irq(0x0c20),
+			    evt2irq(0x0c20), evt2irq(0x0c20) },
 };
 
 static struct platform_device scif1_device = {
@@ -62,11 +68,13 @@ static struct platform_device scif1_device = {
 	},
 };
 
+/* SCIFA2 */
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xe6c60000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 82, 82, 82, 82 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c40), evt2irq(0x0c40),
+			    evt2irq(0x0c40), evt2irq(0x0c40) },
 };
 
 static struct platform_device scif2_device = {
@@ -77,11 +85,13 @@ static struct platform_device scif2_device = {
 	},
 };
 
+/* SCIFA3 */
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xe6c70000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 83, 83, 83, 83 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c60), evt2irq(0x0c60),
+			    evt2irq(0x0c60), evt2irq(0x0c60) },
 };
 
 static struct platform_device scif3_device = {
@@ -92,11 +102,13 @@ static struct platform_device scif3_device = {
 	},
 };
 
+/* SCIFA4 */
 static struct plat_sci_port scif4_platform_data = {
 	.mapbase	= 0xe6c80000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 89, 89, 89, 89 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0d20), evt2irq(0x0d20),
+			    evt2irq(0x0d20), evt2irq(0x0d20) },
 };
 
 static struct platform_device scif4_device = {
@@ -107,11 +119,13 @@ static struct platform_device scif4_device = {
 	},
 };
 
+/* SCIFA5 */
 static struct plat_sci_port scif5_platform_data = {
 	.mapbase	= 0xe6cb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 90, 90, 90, 90 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0d40), evt2irq(0x0d40),
+			    evt2irq(0x0d40), evt2irq(0x0d40) },
 };
 
 static struct platform_device scif5_device = {
@@ -122,11 +136,13 @@ static struct platform_device scif5_device = {
 	},
 };
 
+/* SCIFB */
 static struct plat_sci_port scif6_platform_data = {
 	.mapbase	= 0xe6c30000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 91, 91, 91, 91 },
+	.type		= PORT_SCIFB,
+	.irqs		= { evt2irq(0x0d60), evt2irq(0x0d60),
+			    evt2irq(0x0d60), evt2irq(0x0d60) },
 };
 
 static struct platform_device scif6_device = {
@@ -137,11 +153,12 @@ static struct platform_device scif6_device = {
 	},
 };
 
+/* CMT */
 static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clk = "r_clk",
+	.clk = "cmt1",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
@@ -154,7 +171,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 72,
+		.start	= evt2irq(0x0b00), /* CMT1_CMT10 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -169,6 +186,337 @@ static struct platform_device cmt10_device = {
 	.num_resources	= ARRAY_SIZE(cmt10_resources),
 };
 
+/* I2C */
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0xFFF20000,
+		.end    = 0xFFF20425 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = intcs_evt2irq(0xe00), /* IIC0_ALI0 */
+		.end    = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0xE6C20000,
+		.end    = 0xE6C20425 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x780), /* IIC1_ALI1 */
+		.end    = evt2irq(0x7e0), /* IIC1_DTEI1 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 1, /* "i2c1" clock */
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+/* DMA */
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT		= 0,
+	XMIT_SZ_16BIT		= 1,
+	XMIT_SZ_32BIT		= 2,
+	XMIT_SZ_64BIT		= 7,
+	XMIT_SZ_128BIT		= 3,
+	XMIT_SZ_256BIT		= 4,
+	XMIT_SZ_512BIT		= 5,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_64BIT]		= 3,	\
+	[XMIT_SZ_128BIT]	= 4,	\
+	[XMIT_SZ_256BIT]	= 5,	\
+	[XMIT_SZ_512BIT]	= 6,	\
+}
+
+#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \
+			 (((i) & 0xc) << (20 - 2)))
+
+static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
+		.addr		= 0xe6c40020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
+		.addr		= 0xe6c40024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
+		.addr		= 0xe6c50020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x25,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
+		.addr		= 0xe6c50024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x26,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0xe6c60020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0xe6c60024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
+		.addr		= 0xe6c70020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2d,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
+		.addr		= 0xe6c70024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2e,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
+		.addr		= 0xe6c80020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x39,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
+		.addr		= 0xe6c80024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x3a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
+		.addr		= 0xe6cb0020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x35,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
+		.addr		= 0xe6cb0024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x36,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
+		.addr		= 0xe6c30040,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x3d,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
+		.addr		= 0xe6c30060,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x3e,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
+		.addr		= 0xe6850030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
+		.addr		= 0xe6850030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
+		.addr		= 0xe6860030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc9,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
+		.addr		= 0xe6860030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xca,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
+		.addr		= 0xe6870030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xcd,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
+		.addr		= 0xe6870030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xce,
+	},
+};
+
+static const struct sh_dmae_channel sh7372_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma_platform_data = {
+	.slave		= sh7372_dmae_slaves,
+	.slave_num	= ARRAY_SIZE(sh7372_dmae_slaves),
+	.channel	= sh7372_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7372_dmae_channels),
+	.ts_low_shift	= 3,
+	.ts_low_mask	= 0x18,
+	.ts_high_shift	= (20 - 2),	/* 2 bits for shifted low TS */
+	.ts_high_mask	= 0x00300000,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_DME,
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= 246,
+		.end	= 246,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-5 */
+		.start	= 240,
+		.end	= 245,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae1_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe018020,
+		.end	= 0xfe01808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe019000,
+		.end	= 0xfe01900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= 254,
+		.end	= 254,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-5 */
+		.start	= 248,
+		.end	= 253,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae2_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe028020,
+		.end	= 0xfe02808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe029000,
+		.end	= 0xfe02900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= 262,
+		.end	= 262,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-5 */
+		.start	= 256,
+		.end	= 261,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 0,
+	.resource	= sh7372_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_dmae0_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7372_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+static struct platform_device dma2_device = {
+	.name		= "sh-dma-engine",
+	.id		= 2,
+	.resource	= sh7372_dmae2_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_dmae2_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7372_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -178,6 +526,11 @@ static struct platform_device *sh7372_early_devices[] __initdata = {
 	&scif5_device,
 	&scif6_device,
 	&cmt10_device,
+	&iic0_device,
+	&iic1_device,
+	&dma0_device,
+	&dma1_device,
+	&dma2_device,
 };
 
 void __init sh7372_add_standard_devices(void)
@@ -186,14 +539,8 @@ void __init sh7372_add_standard_devices(void)
 			    ARRAY_SIZE(sh7372_early_devices));
 }
 
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR3_CMT1 (1 << 29)
-
 void __init sh7372_add_early_devices(void)
 {
-	/* enable clock to CMT1 */
-	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
-
 	early_platform_add_devices(sh7372_early_devices,
 				   ARRAY_SIZE(sh7372_early_devices));
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index 60e3777..bb4adf1 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -32,11 +32,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs		= { 80, 80, 80, 80 },
+	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
+			    evt2irq(0xc00), evt2irq(0xc00) },
 };
 
 static struct platform_device scif0_device = {
@@ -47,11 +49,13 @@ static struct platform_device scif0_device = {
 	},
 };
 
+/* SCIFA1 */
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xe6c50000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 81, 81, 81, 81 },
+	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
+			    evt2irq(0xc20), evt2irq(0xc20) },
 };
 
 static struct platform_device scif1_device = {
@@ -62,11 +66,13 @@ static struct platform_device scif1_device = {
 	},
 };
 
+/* SCIFA2 */
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xe6c60000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 82, 82, 82, 82 },
+	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
+			    evt2irq(0xc40), evt2irq(0xc40) },
 };
 
 static struct platform_device scif2_device = {
@@ -77,11 +83,13 @@ static struct platform_device scif2_device = {
 	},
 };
 
+/* SCIFA3 */
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xe6c70000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 83, 83, 83, 83 },
+	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
+			    evt2irq(0xc60), evt2irq(0xc60) },
 };
 
 static struct platform_device scif3_device = {
@@ -92,11 +100,13 @@ static struct platform_device scif3_device = {
 	},
 };
 
+/* SCIFA4 */
 static struct plat_sci_port scif4_platform_data = {
 	.mapbase	= 0xe6c80000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 89, 89, 89, 89 },
+	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
+			    evt2irq(0xd20), evt2irq(0xd20) },
 };
 
 static struct platform_device scif4_device = {
@@ -107,11 +117,13 @@ static struct platform_device scif4_device = {
 	},
 };
 
+/* SCIFA5 */
 static struct plat_sci_port scif5_platform_data = {
 	.mapbase	= 0xe6cb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 90, 90, 90, 90 },
+	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
+			    evt2irq(0xd40), evt2irq(0xd40) },
 };
 
 static struct platform_device scif5_device = {
@@ -122,11 +134,13 @@ static struct platform_device scif5_device = {
 	},
 };
 
+/* SCIFA6 */
 static struct plat_sci_port scif6_platform_data = {
 	.mapbase	= 0xe6cc0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 196, 196, 196, 196 },
+	.irqs		= { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80),
+			    intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) },
 };
 
 static struct platform_device scif6_device = {
@@ -137,11 +151,13 @@ static struct platform_device scif6_device = {
 	},
 };
 
+/* SCIFB */
 static struct plat_sci_port scif7_platform_data = {
 	.mapbase	= 0xe6c30000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 91, 91, 91, 91 },
+	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
+			    evt2irq(0xd60), evt2irq(0xd60) },
 };
 
 static struct platform_device scif7_device = {
@@ -169,7 +185,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 72,
+		.start	= evt2irq(0xb00), /* CMT1_CMT10 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 4f8f99a..b5e75bb 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -30,15 +30,6 @@
 #define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
 #define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
 
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
-
-#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
 /* CIK guesswork */
 #define PCIBIOS_MIN_IO			0x44000000
 #define PCIBIOS_MIN_MEM			0x50000000
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e1fd98f..33c3f57 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -771,8 +771,8 @@ config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		   ARCH_TEGRA
+		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
+		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index a17cc0c..4aacdd1 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,7 +4,6 @@
 
 obj-y	:= dma.o
 
-obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c
deleted file mode 100644
index 267ceb6..0000000
--- a/arch/arm/plat-pxa/pmu.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * PMU IRQ registration for the PXA xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource pmu_resource = {
-	.start	= IRQ_PMU,
-	.end	= IRQ_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-static int __init pxa_pmu_init(void)
-{
-	platform_device_register(&pmu_device);
-	return 0;
-}
-arch_initcall(pxa_pmu_init);
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 11d6a1b..c6a855d 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,9 +7,10 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
 	default y
-	select ARM_VIC
+	select ARM_VIC if !ARCH_S5PV310
+	select ARM_GIC if ARCH_S5PV310
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
@@ -30,3 +31,18 @@ config S5P_EXT_INT
 	help
 	  Use the external interrupts (other than GPIO interrupts.)
 	  Note: Do not choose this for S5P6440.
+
+config S5P_DEV_FIMC0
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 2
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 39c242b..b2e0296 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,9 +12,15 @@ obj-				:=
 
 # Core files
 
+obj-y				+= dev-pmu.o
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 
+# devices
+
+obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
+obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
+obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 75cb8c3..b07a078 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -21,6 +21,7 @@
 #include <plat/s5p6442.h>
 #include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
+#include <plat/s5pv310.h>
 
 /* table of supported CPUs */
 
@@ -28,6 +29,7 @@ static const char name_s5p6440[] = "S5P6440";
 static const char name_s5p6442[] = "S5P6442";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
+static const char name_s5pv310[] = "S5PV310";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
@@ -62,6 +64,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init_uarts	= s5pv210_init_uarts,
 		.init		= s5pv210_init,
 		.name		= name_s5pv210,
+	}, {
+		.idcode		= 0x43200000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pv310_map_io,
+		.init_clocks	= s5pv310_init_clocks,
+		.init_uarts	= s5pv310_init_uarts,
+		.init		= s5pv310_init,
+		.name		= name_s5pv310,
 	},
 };
 
@@ -81,8 +91,9 @@ static struct map_desc s5p_iodesc[] __initdata = {
 	}, {
 		.virtual	= (unsigned long)S3C_VA_UART,
 		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
+		.length		= SZ_512K,
 		.type		= MT_DEVICE,
+#ifdef CONFIG_ARM_VIC
 	}, {
 		.virtual	= (unsigned long)VA_VIC0,
 		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
@@ -93,6 +104,7 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
+#endif
 	}, {
 		.virtual	= (unsigned long)S3C_VA_TIMER,
 		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
@@ -103,6 +115,11 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C_PA_WDT),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
new file mode 100644
index 0000000..d3f1a9b
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc0.c
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s5p/dev-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC0 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc0_resource[] = {
+	[0] = {
+		.start	= S5P_PA_FIMC0,
+		.end	= S5P_PA_FIMC0 + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_FIMC0,
+		.end	= IRQ_FIMC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_fimc0 = {
+	.name		= "s5p-fimc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
+	.resource	= s5p_fimc0_resource,
+};
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
new file mode 100644
index 0000000..41bd698
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc1.c
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s5p/dev-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC1 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc1_resource[] = {
+	[0] = {
+		.start	= S5P_PA_FIMC1,
+		.end	= S5P_PA_FIMC1 + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_FIMC1,
+		.end	= IRQ_FIMC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_fimc1 = {
+	.name		= "s5p-fimc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
+	.resource	= s5p_fimc1_resource,
+};
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
new file mode 100644
index 0000000..dfddeda
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc2.c
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s5p/dev-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC2 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc2_resource[] = {
+	[0] = {
+		.start	= S5P_PA_FIMC2,
+		.end	= S5P_PA_FIMC2 + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_FIMC2,
+		.end	= IRQ_FIMC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_fimc2 = {
+	.name		= "s5p-fimc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
+	.resource	= s5p_fimc2_resource,
+};
diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c
new file mode 100644
index 0000000..a08576d
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-pmu.c
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/plat-s5p/dev-pmu.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource s5p_pmu_resource = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+struct platform_device s5p_device_pmu = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= 1,
+	.resource	= &s5p_pmu_resource,
+};
+
+static int __init s5p_pmu_init(void)
+{
+	platform_device_register(&s5p_device_pmu);
+	return 0;
+}
+arch_initcall(s5p_pmu_init);
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index 1482852..54e9fb9d 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -18,12 +18,27 @@
 #define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
 #define S5P_VA_SROMC		S3C_ADDR(0x01100000)
 
-#define S5P_VA_UART0		(S3C_VA_UART + 0x0)
-#define S5P_VA_UART1		(S3C_VA_UART + 0x400)
-#define S5P_VA_UART2		(S3C_VA_UART + 0x800)
-#define S5P_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x00600000)
+#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
 
+#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x00800000)
+#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
+#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
+#define S5P_VA_GIC_CPU		S5P_VA_COREPERI(0x100)
+#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
+#define S5P_VA_GIC_DIST		S5P_VA_COREPERI(0x1000)
+
+#define S5P_VA_L2CC		S3C_ADDR(0x00900000)
+
+#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_VA_UART0		S5P_VA_UART(0)
+#define S5P_VA_UART1		S5P_VA_UART(1)
+#define S5P_VA_UART2		S5P_VA_UART(2)
+#define S5P_VA_UART3		S5P_VA_UART(3)
+
+#ifndef S3C_UART_OFFSET
 #define S3C_UART_OFFSET		(0x400)
+#endif
 
 #define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0			VA_VIC(0)
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 7db3227..4e8fe08 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -46,6 +46,47 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 	return (unsigned long)fvco;
 }
 
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL46XX_PDIV_MASK	(0x3F)
+#define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_MDIV_SHIFT	(16)
+#define PLL46XX_PDIV_SHIFT	(8)
+#define PLL46XX_SDIV_SHIFT	(0)
+
+enum pll46xx_type_t {
+	pll_4600,
+	pll_4650,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1,
+					    enum pll46xx_type_t pll_type)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	if (pll_type == pll_4600) {
+		tmp *= (mdiv << 16) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 16;
+	} else {
+		tmp *= (mdiv << 10) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 10;
+	}
+
+	return result;
+}
+
 #define PLL90XX_MDIV_MASK	(0xFF)
 #define PLL90XX_PDIV_MASK	(0x3F)
 #define PLL90XX_SDIV_MASK	(0x7)
diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-s5p/include/plat/reset.h
new file mode 100644
index 0000000..335e978
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/reset.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/plat-s5p/include/plat/reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_RESET_H
+#define __ASM_PLAT_S5P_RESET_H __FILE__
+
+extern void (*s5p_reset_hook)(void);
+
+#endif /* __ASM_PLAT_S5P_RESET_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h
new file mode 100644
index 0000000..769c991
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv310.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pv310 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV310 related SoCs */
+
+extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv310_register_clocks(void);
+extern void s5pv310_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV310
+
+extern  int s5pv310_init(void);
+extern void s5pv310_init_irq(void);
+extern void s5pv310_map_io(void);
+extern void s5pv310_init_clocks(int xtal);
+extern struct sys_timer s5pv310_timer;
+
+#define s5pv310_init_uarts s5pv310_common_init_uarts
+
+#else
+#define s5pv310_init_clocks NULL
+#define s5pv310_init_uarts NULL
+#define s5pv310_map_io NULL
+#define s5pv310_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-s5p/include/plat/system-reset.h
new file mode 100644
index 0000000..f307f34
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/system-reset.h
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * S5P - System define for arch_reset()
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/watchdog-reset.h>
+
+void (*s5p_reset_hook)(void);
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* SWRESET support in s5p_reset_hook() */
+
+	if (s5p_reset_hook)
+		s5p_reset_hook();
+
+	/* Perform reset using Watchdog reset
+	 * if there is no s5p_reset_hook()
+	 */
+
+	arch_wdt_reset();
+}
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index 25e1eb6..5560b12 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -56,11 +56,13 @@ static struct s3c_uart_irq uart_irqs[] = {
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
+#ifdef CONFIG_ARM_VIC
 	int irq;
 
 	/* initialize the VICs */
 	for (irq = 0; irq < num_vic; irq++)
 		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+#endif
 
 	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
 	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 2753fb3..4529dd6 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2
 	help
 	  Compile in platform device definitions for HSMMC channel 2
 
+config S3C_DEV_HSMMC3
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 3
+
 config S3C_DEV_HWMON
 	bool
 	help
@@ -216,6 +221,11 @@ config SAMSUNG_DEV_ADC
 	help
 	  Compile in platform device definition for ADC controller
 
+config SAMSUNG_DEV_IDE
+	bool
+	help
+	  Compile in platform device definitions for IDE
+
 config S3C64XX_DEV_SPI
 	bool
 	help
@@ -227,6 +237,11 @@ config SAMSUNG_DEV_TS
 	help
 	    Common in platform device definitions for touchscreen device
 
+config SAMSUNG_DEV_KEYPAD
+	bool
+	help
+	  Compile in platform device definitions for keypad
+
 # DMA
 
 config S3C_DMA
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index b1d82cc..4d8ff92 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o
-obj-y				+= time.o
+obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
@@ -30,9 +30,12 @@ obj-$(CONFIG_S3C_ADC)	+= adc.o
 
 # devices
 
+obj-y				+= platformdata.o
+
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HSMMC3)	+= dev-hsmmc3.o
 obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
@@ -47,7 +50,9 @@ obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o
 
 obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_IDE)	+= dev-ide.o
 obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
+obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)	+= dev-keypad.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39..b0f93f1 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -60,6 +60,11 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
 	struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
 
 	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4c..1504fd8 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -60,6 +60,11 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
 	struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
 
 	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580b..b28ef17 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -61,6 +61,11 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
 	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
 
 	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
new file mode 100644
index 0000000..85aaf0f
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/plat-samsung/dev-hsmmc1.c
+ *
+ * Samsung device definition for hsmmc device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc3_resource[] = {
+	[0] = {
+		.start	= S3C_PA_HSMMC3,
+		.end	= S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC3,
+		.end	= IRQ_MMC3,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+	.name		= "s3c-sdhci",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
+	.resource	= s3c_hsmmc3_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc3_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc3_def_platdata,
+	},
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
+
+	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c
new file mode 100644
index 0000000..b497982
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-ide.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA device definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/ata.h>
+#include <plat/devs.h>
+
+static struct resource s3c_cfcon_resource[] = {
+	[0] = {
+		.start	= SAMSUNG_PA_CFCON,
+		.end	= SAMSUNG_PA_CFCON + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CFCON,
+		.end	= IRQ_CFCON,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_cfcon = {
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
+	.resource	= s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+			 &s3c_device_cfcon);
+}
diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c
new file mode 100644
index 0000000..677c2d7
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-keypad.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/keypad.h>
+
+static struct resource samsung_keypad_resources[] = {
+	[0] = {
+		.start	= SAMSUNG_PA_KEYPAD,
+		.end	= SAMSUNG_PA_KEYPAD + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KEYPAD,
+		.end	= IRQ_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device samsung_device_keypad = {
+	.name		= "samsung-keypad",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
+	.resource	= samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+	struct samsung_keypad_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+			&samsung_device_keypad);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c
index 5efca87..019b5b8 100644
--- a/arch/arm/plat-samsung/dev-wdt.c
+++ b/arch/arm/plat-samsung/dev-wdt.c
@@ -21,7 +21,7 @@
 static struct resource s3c_wdt_resource[] = {
 	[0] = {
 		.start	= S3C_PA_WDT,
-		.end	= S3C_PA_WDT + SZ_1M - 1,
+		.end	= S3C_PA_WDT + SZ_1K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
index 8a8ba8b..c354089 100644
--- a/arch/arm/plat-samsung/gpiolib.c
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/gpio.h>
+#include <linux/gpio.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
new file mode 100644
index 0000000..a281568
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_ADC
+	s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata-core.h b/arch/arm/plat-samsung/include/plat/ata-core.h
new file mode 100644
index 0000000..f5a4ec7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_CORE_H
+#define __ASM_PLAT_ATA_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+	s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
new file mode 100644
index 0000000..2a3855a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+	void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index e6144e4..85f6f23 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -54,6 +54,8 @@ extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_cfcon;
 
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
@@ -100,6 +102,12 @@ extern struct platform_device s5pc100_device_iis0;
 extern struct platform_device s5pc100_device_iis1;
 extern struct platform_device s5pc100_device_iis2;
 
+extern struct platform_device samsung_device_keypad;
+
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
@@ -108,3 +116,15 @@ extern struct platform_device s3c_device_camif;
 extern struct platform_device s3c_device_ac97;
 
 #endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev);
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
new file mode 100644
index 0000000..81a3bfe
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fimc-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fimc-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *	Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung camera interface driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_FIMC_CORE_H
+#define __ASM_PLAT_FIMC_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s3c_fimc_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMC0
+	case 0:
+		s5p_device_fimc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+	case 1:
+		s5p_device_fimc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+	case 2:
+		s5p_device_fimc2.name = name;
+		break;
+#endif
+	}
+}
+
+#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad-core.h b/arch/arm/plat-samsung/include/plat/keypad-core.h
new file mode 100644
index 0000000..d513e1b
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad-core.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung keypad controller core function
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_KEYPAD_CORE_H
+#define __ASM_ARCH_KEYPAD_CORE_H
+
+/* These function are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void samsung_keypad_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+	samsung_device_keypad.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_KEYPAD_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
index 3a70c12..b59a648 100644
--- a/arch/arm/plat-samsung/include/plat/keypad.h
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -40,4 +40,17 @@ struct samsung_keypad_platdata {
 	void (*cfg_gpio)(unsigned int rows, unsigned int cols);
 };
 
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
 #endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-ata.h b/arch/arm/plat-samsung/include/plat/regs-ata.h
new file mode 100644
index 0000000..f5df92f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-ata.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_ATA_H
+#define __ASM_PLAT_REGS_ATA_H __FILE__
+
+#define S3C_CFATA_REG(x)	(x)
+
+#define S3C_CFATA_MUX		S3C_CFATA_REG(0x0)
+
+#define S3C_ATA_CTRL		S3C_CFATA_REG(0x0)
+#define S3C_ATA_STATUS		S3C_CFATA_REG(0x4)
+#define S3C_ATA_CMD		S3C_CFATA_REG(0x8)
+#define S3C_ATA_SWRST		S3C_CFATA_REG(0xc)
+#define S3C_ATA_IRQ		S3C_CFATA_REG(0x10)
+#define S3C_ATA_IRQ_MSK		S3C_CFATA_REG(0x14)
+#define S3C_ATA_CFG		S3C_CFATA_REG(0x18)
+
+#define S3C_ATA_MDMA_TIME	S3C_CFATA_REG(0x28)
+#define S3C_ATA_PIO_TIME	S3C_CFATA_REG(0x2c)
+#define S3C_ATA_UDMA_TIME	S3C_CFATA_REG(0x30)
+#define S3C_ATA_XFR_NUM		S3C_CFATA_REG(0x34)
+#define S3C_ATA_XFR_CNT		S3C_CFATA_REG(0x38)
+#define S3C_ATA_TBUF_START	S3C_CFATA_REG(0x3c)
+#define S3C_ATA_TBUF_SIZE	S3C_CFATA_REG(0x40)
+#define S3C_ATA_SBUF_START	S3C_CFATA_REG(0x44)
+#define S3C_ATA_SBUF_SIZE	S3C_CFATA_REG(0x48)
+#define S3C_ATA_CADR_TBUF	S3C_CFATA_REG(0x4c)
+#define S3C_ATA_CADR_SBUF	S3C_CFATA_REG(0x50)
+#define S3C_ATA_PIO_DTR		S3C_CFATA_REG(0x54)
+#define S3C_ATA_PIO_FED		S3C_CFATA_REG(0x58)
+#define S3C_ATA_PIO_SCR		S3C_CFATA_REG(0x5c)
+#define S3C_ATA_PIO_LLR		S3C_CFATA_REG(0x60)
+#define S3C_ATA_PIO_LMR		S3C_CFATA_REG(0x64)
+#define S3C_ATA_PIO_LHR		S3C_CFATA_REG(0x68)
+#define S3C_ATA_PIO_DVR		S3C_CFATA_REG(0x6c)
+#define S3C_ATA_PIO_CSD		S3C_CFATA_REG(0x70)
+#define S3C_ATA_PIO_DAD		S3C_CFATA_REG(0x74)
+#define S3C_ATA_PIO_READY	S3C_CFATA_REG(0x78)
+#define S3C_ATA_PIO_RDATA	S3C_CFATA_REG(0x7c)
+
+#define S3C_CFATA_MUX_TRUEIDE	0x01
+
+#define S3C_ATA_CFG_SWAP	0x40
+#define S3C_ATA_CFG_IORDYEN	0x02
+
+#endif /* __ASM_PLAT_REGS_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 65c190d..30b7cc1 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -14,6 +14,9 @@
 #define __ASM_ARCH_REGS_RTC_H __FILE__
 
 #define S3C2410_RTCREG(x) (x)
+#define S3C2410_INTP		S3C2410_RTCREG(0x30)
+#define S3C2410_INTP_ALM	(1 << 1)
+#define S3C2410_INTP_TIC	(1 << 0)
 
 #define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
 #define S3C2410_RTCCON_RTCEN  (1<<0)
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index a6eba84..788837e9 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -259,6 +259,8 @@ struct s3c2410_uartcfg {
 	unsigned short	   flags;
 	upf_t		   uart_flags;	 /* default uart flags */
 
+	unsigned int	   has_fracval;
+
 	unsigned long	   ucon;	 /* value of ucon for port */
 	unsigned long	   ulcon;	 /* value of ulcon for port */
 	unsigned long	   ufcon;	 /* value of ufcon for port */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 016674f..30844c2 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -20,10 +20,31 @@ struct mmc_host;
 struct mmc_card;
 struct mmc_ios;
 
+enum cd_types {
+	S3C_SDHCI_CD_INTERNAL,	/* use mmc internal CD line */
+	S3C_SDHCI_CD_EXTERNAL,	/* use external callback */
+	S3C_SDHCI_CD_GPIO,	/* use external gpio pin for CD line */
+	S3C_SDHCI_CD_NONE,	/* no CD line, use polling to detect card */
+	S3C_SDHCI_CD_PERMANENT,	/* no CD line, card permanently wired to host */
+};
+
 /**
  * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
  * @max_width: The maximum number of data bits supported.
  * @host_caps: Standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ *		 sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *		 notify_func argument is a callback to the sdhci-s3c driver
+ *		 that triggers the card detection event. Callback arguments:
+ *		 dev is pointer to platform device of the host controller,
+ *		 state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ *		 sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *		 notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ *		 cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
  * @cfg_card: Configure the interface for a specific card and speed. This
  *            is necessary the controllers and/or GPIO blocks require the
@@ -37,9 +58,17 @@ struct mmc_ios;
 struct s3c_sdhci_platdata {
 	unsigned int	max_width;
 	unsigned int	host_caps;
+	enum cd_types	cd_type;
 
 	char		**clocks;	/* set of clock sources */
 
+	int		ext_cd_gpio;
+	bool		ext_cd_gpio_invert;
+	int	(*ext_cd_init)(void (*notify_func)(struct platform_device *,
+						   int state));
+	int	(*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+						      int state));
+
 	void	(*cfg_gpio)(struct platform_device *dev, int width);
 	void	(*cfg_card)(struct platform_device *dev,
 			    void __iomem *regbase,
@@ -58,6 +87,7 @@ struct s3c_sdhci_platdata {
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -66,6 +96,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availablity */
 
@@ -78,13 +109,13 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
-/* S3C6400 SDHCI setup */
+/* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
 extern char *s3c64xx_hsmmc_clksrcs[4];
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 					 void __iomem *r,
 					 struct mmc_ios *ios,
@@ -92,76 +123,62 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 
 static inline void s3c6400_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
 
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif  /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6400_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6400_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-/* S3C6410 SDHCI setup */
 
 extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
 					 void __iomem *r,
 					 struct mmc_ios *ios,
 					 struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s3c6410_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6410_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6410_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
 
 #else
 static inline void s3c6410_default_sdhci0(void) { }
@@ -183,48 +200,42 @@ extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   struct mmc_ios *ios,
 					   struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s5pc100_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s5pc100_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s5pc100_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
 
 #else
 static inline void s5pc100_default_sdhci0(void) { }
 static inline void s5pc100_default_sdhci1(void) { }
 static inline void s5pc100_default_sdhci2(void) { }
+
 #endif /* CONFIG_S5PC100_SETUP_SDHCI */
 
+/* S5PV210 SDHCI setup */
 
-/* S5PC110 SDHCI setup */
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
 extern char *s5pv210_hsmmc_clksrcs[4];
 
@@ -233,46 +244,48 @@ extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
 					   struct mmc_ios *ios,
 					   struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s5pv210_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s5pv210_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s5pv210_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv210_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
+	s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
 
 #else
 static inline void s5pv210_default_sdhci0(void) { }
 static inline void s5pv210_default_sdhci1(void) { }
 static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-
+static inline void s5pv210_default_sdhci3(void) { }
 
+#endif /* CONFIG_S5PV210_SETUP_SDHCI */
 
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
new file mode 100644
index 0000000..7cf2e1e
--- /dev/null
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-samsung/platformdata.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+ *
+ * Helper for platform data setting
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev)
+{
+	void *npd;
+
+	if (!pd) {
+		/* too early to use dev_name(), may not be registered */
+		printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+		return NULL;
+	}
+
+	npd = kmemdup(pd, pdsize, GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
+		return NULL;
+	}
+
+	pdev->dev.platform_data = npd;
+	return npd;
+}
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index de375b6..3da116f 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -154,7 +154,7 @@ static struct platform_device nand_flash_device = {
 #define PORT_DRVCRA	0xA405018A
 #define PORT_DRVCRB	0xA405018C
 
-static void ap320_wvga_power_on(void *board_data)
+static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
 {
 	msleep(100);
 
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
index 4e577a3..60dd63f 100644
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -1,2 +1,4 @@
-obj-y	 := setup.o sdram.o
-obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o
+obj-y	:= setup.o sdram.o
+ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
+obj-y	+=  lcd_wqvga.o
+endif
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
index e9b97084..25e145f 100644
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -327,7 +327,7 @@ static int kfr2r09_lcd_backlight(int on)
 	return 0;
 }
 
-void kfr2r09_lcd_on(void *board_data)
+void kfr2r09_lcd_on(void *board_data, struct fb_info *info)
 {
 	kfr2r09_lcd_backlight(1);
 }
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
index 484ef42..07e635b 100644
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -3,23 +3,23 @@
 
 #include <video/sh_mobile_lcdc.h>
 
-#ifdef CONFIG_FB_SH_MOBILE_LCDC
-void kfr2r09_lcd_on(void *board_data);
+#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
+void kfr2r09_lcd_on(void *board_data, struct fb_info *info);
 void kfr2r09_lcd_off(void *board_data);
 int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
 		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
 		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 #else
-static inline void kfr2r09_lcd_on(void *board_data) {}
-static inline void kfr2r09_lcd_off(void *board_data) {}
-static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
-				    struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+static void kfr2r09_lcd_on(void *board_data) {}
+static void kfr2r09_lcd_off(void *board_data) {}
+static int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {
 	return -ENODEV;
 }
-static inline void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
-				     struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+static void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {
 }
 #endif