Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] s5pv210: make needlessly global symbols static
  [CPUFREQ] exynos4210: make needlessly global symbols static
  [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation
  [CPUFREQ] S5PV210: Add reboot notifier to prevent system hang
  [CPUFREQ] S5PV210: Adjust udelay prior to voltage scaling down
  [CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency
  [CPUFREQ] S5PV210: Add pm_notifier to prevent system unstable
  [CPUFREQ] S5PV210: Add arm/int voltage control support
  [CPUFREQ] S5PV210: Add additional symantics for "relation" in cpufreq with pm
  [CPUFREQ] S3C64xx: Notify transition complete as soon as frequency changed
  [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq
  [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put
  [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq
  [CPUFREQ] Remove some vi noise that escaped into the Makefile.
  [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/
  [CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq
  [CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreq

7 files changed, 0 insertions, 1334 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1478c61..83a7aa2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1895,10 +1895,6 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
-config CPU_FREQ_S3C64XX
-	bool "CPUfreq support for Samsung S3C64XX CPUs"
-	depends on CPU_FREQ && CPU_S3C6410
-
 config CPU_FREQ_S3C
 	bool
 	help
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 60fe5ec..1366995 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -15,7 +15,6 @@ obj-				:=
 obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-exynos4/cpufreq.c b/arch/arm/mach-exynos4/cpufreq.c
deleted file mode 100644
index a1bd258..0000000
--- a/arch/arm/mach-exynos4/cpufreq.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/* linux/arch/arm/mach-exynos4/cpufreq.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <linux/cpufreq.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
-
-#include <plat/clock.h>
-#include <plat/pm.h>
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-
-static struct regulator *arm_regulator;
-static struct regulator *int_regulator;
-
-static struct cpufreq_freqs freqs;
-static unsigned int memtype;
-
-enum exynos4_memory_type {
-	DDR2 = 4,
-	LPDDR2,
-	DDR3,
-};
-
-enum cpufreq_level_index {
-	L0, L1, L2, L3, CPUFREQ_LEVEL_END,
-};
-
-static struct cpufreq_frequency_table exynos4_freq_table[] = {
-	{L0, 1000*1000},
-	{L1, 800*1000},
-	{L2, 400*1000},
-	{L3, 100*1000},
-	{0, CPUFREQ_TABLE_END},
-};
-
-static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
-	 *		DIVATB, DIVPCLK_DBG, DIVAPLL }
-	 */
-
-	/* ARM L0: 1000MHz */
-	{ 0, 3, 7, 3, 3, 0, 1 },
-
-	/* ARM L1: 800MHz */
-	{ 0, 3, 7, 3, 3, 0, 1 },
-
-	/* ARM L2: 400MHz */
-	{ 0, 1, 3, 1, 3, 0, 1 },
-
-	/* ARM L3: 100MHz */
-	{ 0, 0, 1, 0, 3, 1, 1 },
-};
-
-static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVCOPY, DIVHPM }
-	 */
-
-	 /* ARM L0: 1000MHz */
-	{ 3, 0 },
-
-	/* ARM L1: 800MHz */
-	{ 3, 0 },
-
-	/* ARM L2: 400MHz */
-	{ 3, 0 },
-
-	/* ARM L3: 100MHz */
-	{ 3, 0 },
-};
-
-static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
-	 *		DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
-	 */
-
-	/* DMC L0: 400MHz */
-	{ 3, 1, 1, 1, 1, 1, 3, 1 },
-
-	/* DMC L1: 400MHz */
-	{ 3, 1, 1, 1, 1, 1, 3, 1 },
-
-	/* DMC L2: 266.7MHz */
-	{ 7, 1, 1, 2, 1, 1, 3, 1 },
-
-	/* DMC L3: 200MHz */
-	{ 7, 1, 1, 3, 1, 1, 3, 1 },
-};
-
-static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
-	 */
-
-	/* ACLK200 L0: 200MHz */
-	{ 3, 7, 4, 5, 1 },
-
-	/* ACLK200 L1: 200MHz */
-	{ 3, 7, 4, 5, 1 },
-
-	/* ACLK200 L2: 160MHz */
-	{ 4, 7, 5, 7, 1 },
-
-	/* ACLK200 L3: 133.3MHz */
-	{ 5, 7, 7, 7, 1 },
-};
-
-static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVGDL/R, DIVGPL/R }
-	 */
-
-	/* ACLK_GDL/R L0: 200MHz */
-	{ 3, 1 },
-
-	/* ACLK_GDL/R L1: 200MHz */
-	{ 3, 1 },
-
-	/* ACLK_GDL/R L2: 160MHz */
-	{ 4, 1 },
-
-	/* ACLK_GDL/R L3: 133.3MHz */
-	{ 5, 1 },
-};
-
-struct cpufreq_voltage_table {
-	unsigned int	index;		/* any */
-	unsigned int	arm_volt;	/* uV */
-	unsigned int	int_volt;
-};
-
-static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = {
-	{
-		.index		= L0,
-		.arm_volt	= 1200000,
-		.int_volt	= 1100000,
-	}, {
-		.index		= L1,
-		.arm_volt	= 1100000,
-		.int_volt	= 1100000,
-	}, {
-		.index		= L2,
-		.arm_volt	= 1000000,
-		.int_volt	= 1000000,
-	}, {
-		.index		= L3,
-		.arm_volt	= 900000,
-		.int_volt	= 1000000,
-	},
-};
-
-static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = {
-	/* APLL FOUT L0: 1000MHz */
-	((250 << 16) | (6 << 8) | 1),
-
-	/* APLL FOUT L1: 800MHz */
-	((200 << 16) | (6 << 8) | 1),
-
-	/* APLL FOUT L2 : 400MHz */
-	((200 << 16) | (6 << 8) | 2),
-
-	/* APLL FOUT L3: 100MHz */
-	((200 << 16) | (6 << 8) | 4),
-};
-
-int exynos4_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, exynos4_freq_table);
-}
-
-unsigned int exynos4_getspeed(unsigned int cpu)
-{
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-void exynos4_set_clkdiv(unsigned int div_index)
-{
-	unsigned int tmp;
-
-	/* Change Divider - CPU0 */
-
-	tmp = __raw_readl(S5P_CLKDIV_CPU);
-
-	tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK |
-		S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK |
-		S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK |
-		S5P_CLKDIV_CPU0_APLL_MASK);
-
-	tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
-		(clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
-		(clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
-		(clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
-		(clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
-		(clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
-		(clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_CPU);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STATCPU);
-	} while (tmp & 0x1111111);
-
-	/* Change Divider - CPU1 */
-
-	tmp = __raw_readl(S5P_CLKDIV_CPU1);
-
-	tmp &= ~((0x7 << 4) | 0x7);
-
-	tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
-		(clkdiv_cpu1[div_index][1] << 0));
-
-	__raw_writel(tmp, S5P_CLKDIV_CPU1);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
-	} while (tmp & 0x11);
-
-	/* Change Divider - DMC0 */
-
-	tmp = __raw_readl(S5P_CLKDIV_DMC0);
-
-	tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK |
-		S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK |
-		S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK |
-		S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK);
-
-	tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) |
-		(clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
-		(clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) |
-		(clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) |
-		(clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) |
-		(clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) |
-		(clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) |
-		(clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_DMC0);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
-	} while (tmp & 0x11111111);
-
-	/* Change Divider - TOP */
-
-	tmp = __raw_readl(S5P_CLKDIV_TOP);
-
-	tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK |
-		S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK |
-		S5P_CLKDIV_TOP_ONENAND_MASK);
-
-	tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) |
-		(clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) |
-		(clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) |
-		(clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) |
-		(clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_TOP);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
-	} while (tmp & 0x11111);
-
-	/* Change Divider - LEFTBUS */
-
-	tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
-
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
-		(clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
-	} while (tmp & 0x11);
-
-	/* Change Divider - RIGHTBUS */
-
-	tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
-
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
-		(clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
-	} while (tmp & 0x11);
-}
-
-static void exynos4_set_apll(unsigned int index)
-{
-	unsigned int tmp;
-
-	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
-	clk_set_parent(moutcore, mout_mpll);
-
-	do {
-		tmp = (__raw_readl(S5P_CLKMUX_STATCPU)
-			>> S5P_CLKSRC_CPU_MUXCORE_SHIFT);
-		tmp &= 0x7;
-	} while (tmp != 0x2);
-
-	/* 2. Set APLL Lock time */
-	__raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK);
-
-	/* 3. Change PLL PMS values */
-	tmp = __raw_readl(S5P_APLL_CON0);
-	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
-	tmp |= exynos4_apll_pms_table[index];
-	__raw_writel(tmp, S5P_APLL_CON0);
-
-	/* 4. wait_lock_time */
-	do {
-		tmp = __raw_readl(S5P_APLL_CON0);
-	} while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT)));
-
-	/* 5. MUX_CORE_SEL = APLL */
-	clk_set_parent(moutcore, mout_apll);
-
-	do {
-		tmp = __raw_readl(S5P_CLKMUX_STATCPU);
-		tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK;
-	} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index)
-{
-	unsigned int tmp;
-
-	if (old_index > new_index) {
-		/* The frequency changing to L0 needs to change apll */
-		if (freqs.new == exynos4_freq_table[L0].frequency) {
-			/* 1. Change the system clock divider values */
-			exynos4_set_clkdiv(new_index);
-
-			/* 2. Change the apll m,p,s value */
-			exynos4_set_apll(new_index);
-		} else {
-			/* 1. Change the system clock divider values */
-			exynos4_set_clkdiv(new_index);
-
-			/* 2. Change just s value in apll m,p,s value */
-			tmp = __raw_readl(S5P_APLL_CON0);
-			tmp &= ~(0x7 << 0);
-			tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
-			__raw_writel(tmp, S5P_APLL_CON0);
-		}
-	}
-
-	else if (old_index < new_index) {
-		/* The frequency changing from L0 needs to change apll */
-		if (freqs.old == exynos4_freq_table[L0].frequency) {
-			/* 1. Change the apll m,p,s value */
-			exynos4_set_apll(new_index);
-
-			/* 2. Change the system clock divider values */
-			exynos4_set_clkdiv(new_index);
-		} else {
-			/* 1. Change just s value in apll m,p,s value */
-			tmp = __raw_readl(S5P_APLL_CON0);
-			tmp &= ~(0x7 << 0);
-			tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
-			__raw_writel(tmp, S5P_APLL_CON0);
-
-			/* 2. Change the system clock divider values */
-			exynos4_set_clkdiv(new_index);
-		}
-	}
-}
-
-static int exynos4_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	unsigned int index, old_index;
-	unsigned int arm_volt, int_volt;
-
-	freqs.old = exynos4_getspeed(policy->cpu);
-
-	if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
-					   freqs.old, relation, &old_index))
-		return -EINVAL;
-
-	if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
-					   target_freq, relation, &index))
-		return -EINVAL;
-
-	freqs.new = exynos4_freq_table[index].frequency;
-	freqs.cpu = policy->cpu;
-
-	if (freqs.new == freqs.old)
-		return 0;
-
-	/* get the voltage value */
-	arm_volt = exynos4_volt_table[index].arm_volt;
-	int_volt = exynos4_volt_table[index].int_volt;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* control regulator */
-	if (freqs.new > freqs.old) {
-		/* Voltage up */
-		regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
-		regulator_set_voltage(int_regulator, int_volt, int_volt);
-	}
-
-	/* Clock Configuration Procedure */
-	exynos4_set_frequency(old_index, index);
-
-	/* control regulator */
-	if (freqs.new < freqs.old) {
-		/* Voltage down */
-		regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
-		regulator_set_voltage(int_regulator, int_volt, int_volt);
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static int exynos4_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-#endif
-
-static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
-
-	cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
-
-	/* set the transition latency value */
-	policy->cpuinfo.transition_latency = 100000;
-
-	/*
-	 * EXYNOS4 multi-core processors has 2 cores
-	 * that the frequency cannot be set independently.
-	 * Each cpu is bound to the same speed.
-	 * So the affected cpu is all of the cpus.
-	 */
-	cpumask_setall(policy->cpus);
-
-	return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
-}
-
-static struct cpufreq_driver exynos4_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= exynos4_verify_speed,
-	.target		= exynos4_target,
-	.get		= exynos4_getspeed,
-	.init		= exynos4_cpufreq_cpu_init,
-	.name		= "exynos4_cpufreq",
-#ifdef CONFIG_PM
-	.suspend	= exynos4_cpufreq_suspend,
-	.resume		= exynos4_cpufreq_resume,
-#endif
-};
-
-static int __init exynos4_cpufreq_init(void)
-{
-	cpu_clk = clk_get(NULL, "armclk");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	moutcore = clk_get(NULL, "moutcore");
-	if (IS_ERR(moutcore))
-		goto out;
-
-	mout_mpll = clk_get(NULL, "mout_mpll");
-	if (IS_ERR(mout_mpll))
-		goto out;
-
-	mout_apll = clk_get(NULL, "mout_apll");
-	if (IS_ERR(mout_apll))
-		goto out;
-
-	arm_regulator = regulator_get(NULL, "vdd_arm");
-	if (IS_ERR(arm_regulator)) {
-		printk(KERN_ERR "failed to get resource %s\n", "vdd_arm");
-		goto out;
-	}
-
-	int_regulator = regulator_get(NULL, "vdd_int");
-	if (IS_ERR(int_regulator)) {
-		printk(KERN_ERR "failed to get resource %s\n", "vdd_int");
-		goto out;
-	}
-
-	/*
-	 * Check DRAM type.
-	 * Because DVFS level is different according to DRAM type.
-	 */
-	memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET);
-	memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT);
-	memtype &= S5P_DMC0_MEMTYPE_MASK;
-
-	if ((memtype < DDR2) && (memtype > DDR3)) {
-		printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype);
-		goto out;
-	} else {
-		printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
-	}
-
-	return cpufreq_register_driver(&exynos4_driver);
-
-out:
-	if (!IS_ERR(cpu_clk))
-		clk_put(cpu_clk);
-
-	if (!IS_ERR(moutcore))
-		clk_put(moutcore);
-
-	if (!IS_ERR(mout_mpll))
-		clk_put(mout_mpll);
-
-	if (!IS_ERR(mout_apll))
-		clk_put(mout_apll);
-
-	if (!IS_ERR(arm_regulator))
-		regulator_put(arm_regulator);
-
-	if (!IS_ERR(int_regulator))
-		regulator_put(int_regulator);
-
-	printk(KERN_ERR "%s: failed initialization\n", __func__);
-
-	return -EINVAL;
-}
-late_initcall(exynos4_cpufreq_init);
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 4657363..f5a7144 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -23,10 +23,6 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 obj-y				+= irq.o
 obj-y				+= irq-eint.o
 
-# CPU frequency scaling
-
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
deleted file mode 100644
index 4375b97..0000000
--- a/arch/arm/mach-s3c64xx/cpufreq.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpufreq.c
- *
- * Copyright 2009 Wolfson Microelectronics plc
- *
- * S3C64xx CPUfreq Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-
-static struct clk *armclk;
-static struct regulator *vddarm;
-static unsigned long regulator_latency;
-
-#ifdef CONFIG_CPU_S3C6410
-struct s3c64xx_dvfs {
-	unsigned int vddarm_min;
-	unsigned int vddarm_max;
-};
-
-static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1150000 },
-	[1] = { 1050000, 1150000 },
-	[2] = { 1100000, 1150000 },
-	[3] = { 1200000, 1350000 },
-};
-
-static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
-	{ 0,  66000 },
-	{ 0, 133000 },
-	{ 1, 222000 },
-	{ 1, 266000 },
-	{ 2, 333000 },
-	{ 2, 400000 },
-	{ 2, 532000 },
-	{ 2, 533000 },
-	{ 3, 667000 },
-	{ 0, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
-}
-
-static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
-{
-	if (cpu != 0)
-		return 0;
-
-	return clk_get_rate(armclk) / 1000;
-}
-
-static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
-				      unsigned int target_freq,
-				      unsigned int relation)
-{
-	int ret;
-	unsigned int i;
-	struct cpufreq_freqs freqs;
-	struct s3c64xx_dvfs *dvfs;
-
-	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
-					     target_freq, relation, &i);
-	if (ret != 0)
-		return ret;
-
-	freqs.cpu = 0;
-	freqs.old = clk_get_rate(armclk) / 1000;
-	freqs.new = s3c64xx_freq_table[i].frequency;
-	freqs.flags = 0;
-	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new > freqs.old) {
-		ret = regulator_set_voltage(vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err;
-		}
-	}
-#endif
-
-	ret = clk_set_rate(armclk, freqs.new * 1000);
-	if (ret < 0) {
-		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
-		       freqs.new, ret);
-		goto err;
-	}
-
-#ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new < freqs.old) {
-		ret = regulator_set_voltage(vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err_clk;
-		}
-	}
-#endif
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: Set actual frequency %lukHz\n",
-		 clk_get_rate(armclk) / 1000);
-
-	return 0;
-
-err_clk:
-	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
-		pr_err("Failed to restore original clock rate\n");
-err:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-#ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_config_regulator(void)
-{
-	int count, v, i, found;
-	struct cpufreq_frequency_table *freq;
-	struct s3c64xx_dvfs *dvfs;
-
-	count = regulator_count_voltages(vddarm);
-	if (count < 0) {
-		pr_err("cpufreq: Unable to check supported voltages\n");
-	}
-
-	freq = s3c64xx_freq_table;
-	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
-		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
-
-		dvfs = &s3c64xx_dvfs_table[freq->index];
-		found = 0;
-
-		for (i = 0; i < count; i++) {
-			v = regulator_list_voltage(vddarm, i);
-			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
-				found = 1;
-		}
-
-		if (!found) {
-			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-
-		freq++;
-	}
-
-	/* Guess based on having to do an I2C/SPI write; in future we
-	 * will be able to query the regulator performance here. */
-	regulator_latency = 1 * 1000 * 1000;
-}
-#endif
-
-static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	struct cpufreq_frequency_table *freq;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (s3c64xx_freq_table == NULL) {
-		pr_err("cpufreq: No frequency information for this CPU\n");
-		return -ENODEV;
-	}
-
-	armclk = clk_get(NULL, "armclk");
-	if (IS_ERR(armclk)) {
-		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
-		       PTR_ERR(armclk));
-		return PTR_ERR(armclk);
-	}
-
-#ifdef CONFIG_REGULATOR
-	vddarm = regulator_get(NULL, "vddarm");
-	if (IS_ERR(vddarm)) {
-		ret = PTR_ERR(vddarm);
-		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
-		pr_err("cpufreq: Only frequency scaling available\n");
-		vddarm = NULL;
-	} else {
-		s3c64xx_cpufreq_config_regulator();
-	}
-#endif
-
-	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
-		unsigned long r;
-
-		/* Check for frequencies we can generate */
-		r = clk_round_rate(armclk, freq->frequency * 1000);
-		r /= 1000;
-		if (r != freq->frequency) {
-			pr_debug("cpufreq: %dkHz unsupported by clock\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-
-		/* If we have no regulator then assume startup
-		 * frequency is the maximum we can support. */
-		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-
-		freq++;
-	}
-
-	policy->cur = clk_get_rate(armclk) / 1000;
-
-	/* Datasheet says PLL stabalisation time (if we were to use
-	 * the PLLs, which we don't currently) is ~300us worst case,
-	 * but add some fudge.
-	 */
-	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
-	if (ret != 0) {
-		pr_err("cpufreq: Failed to configure frequency table: %d\n",
-		       ret);
-		regulator_put(vddarm);
-		clk_put(armclk);
-	}
-
-	return ret;
-}
-
-static struct cpufreq_driver s3c64xx_cpufreq_driver = {
-	.owner		= THIS_MODULE,
-	.flags          = 0,
-	.verify		= s3c64xx_cpufreq_verify_speed,
-	.target		= s3c64xx_cpufreq_set_target,
-	.get		= s3c64xx_cpufreq_get_speed,
-	.init		= s3c64xx_cpufreq_driver_init,
-	.name		= "s3c",
-};
-
-static int __init s3c64xx_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
-}
-module_init(s3c64xx_cpufreq_init);
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 50907ac..599a3c0 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -15,7 +15,6 @@ obj-				:=
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 
 # machine support
 
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
deleted file mode 100644
index 153af8b..0000000
--- a/arch/arm/mach-s5pv210/cpufreq.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/cpufreq.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * CPU frequency scaling for S5PC110/S5PV210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-static struct clk *cpu_clk;
-static struct clk *dmc0_clk;
-static struct clk *dmc1_clk;
-static struct cpufreq_freqs freqs;
-
-/* APLL M,P,S values for 1G/800Mhz */
-#define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
-#define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
-
-/*
- * DRAM configurations to calculate refresh counter for changing
- * frequency of memory.
- */
-struct dram_conf {
-	unsigned long freq;	/* HZ */
-	unsigned long refresh;	/* DRAM refresh counter * 1000 */
-};
-
-/* DRAM configuration (DMC0 and DMC1) */
-static struct dram_conf s5pv210_dram_conf[2];
-
-enum perf_level {
-	L0, L1, L2, L3, L4,
-};
-
-enum s5pv210_mem_type {
-	LPDDR	= 0x1,
-	LPDDR2	= 0x2,
-	DDR2	= 0x4,
-};
-
-enum s5pv210_dmc_port {
-	DMC0 = 0,
-	DMC1,
-};
-
-static struct cpufreq_frequency_table s5pv210_freq_table[] = {
-	{L0, 1000*1000},
-	{L1, 800*1000},
-	{L2, 400*1000},
-	{L3, 200*1000},
-	{L4, 100*1000},
-	{0, CPUFREQ_TABLE_END},
-};
-
-static u32 clkdiv_val[5][11] = {
-	/*
-	 * Clock divider value for following
-	 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
-	 *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
-	 *   ONEDRAM, MFC, G3D }
-	 */
-
-	/* L0 : [1000/200/100][166/83][133/66][200/200] */
-	{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L1 : [800/200/100][166/83][133/66][200/200] */
-	{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L2 : [400/200/100][166/83][133/66][200/200] */
-	{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L3 : [200/200/100][166/83][133/66][200/200] */
-	{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L4 : [100/100/100][83/83][66/66][100/100] */
-	{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
-};
-
-/*
- * This function set DRAM refresh counter
- * accoriding to operating frequency of DRAM
- * ch: DMC port number 0 or 1
- * freq: Operating frequency of DRAM(KHz)
- */
-static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
-{
-	unsigned long tmp, tmp1;
-	void __iomem *reg = NULL;
-
-	if (ch == DMC0) {
-		reg = (S5P_VA_DMC0 + 0x30);
-	} else if (ch == DMC1) {
-		reg = (S5P_VA_DMC1 + 0x30);
-	} else {
-		printk(KERN_ERR "Cannot find DMC port\n");
-		return;
-	}
-
-	/* Find current DRAM frequency */
-	tmp = s5pv210_dram_conf[ch].freq;
-
-	do_div(tmp, freq);
-
-	tmp1 = s5pv210_dram_conf[ch].refresh;
-
-	do_div(tmp1, tmp);
-
-	__raw_writel(tmp1, reg);
-}
-
-int s5pv210_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
-}
-
-unsigned int s5pv210_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int s5pv210_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	unsigned long reg;
-	unsigned int index, priv_index;
-	unsigned int pll_changing = 0;
-	unsigned int bus_speed_changing = 0;
-
-	freqs.old = s5pv210_getspeed(0);
-
-	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   target_freq, relation, &index))
-		return -EINVAL;
-
-	freqs.new = s5pv210_freq_table[index].frequency;
-	freqs.cpu = 0;
-
-	if (freqs.new == freqs.old)
-		return 0;
-
-	/* Finding current running level index */
-	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   freqs.old, relation, &priv_index))
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (freqs.new > freqs.old) {
-		/* Voltage up: will be implemented */
-	}
-
-	/* Check if there need to change PLL */
-	if ((index == L0) || (priv_index == L0))
-		pll_changing = 1;
-
-	/* Check if there need to change System bus clock */
-	if ((index == L4) || (priv_index == L4))
-		bus_speed_changing = 1;
-
-	if (bus_speed_changing) {
-		/*
-		 * Reconfigure DRAM refresh counter value for minimum
-		 * temporary clock while changing divider.
-		 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
-		 */
-		if (pll_changing)
-			s5pv210_set_refresh(DMC1, 83000);
-		else
-			s5pv210_set_refresh(DMC1, 100000);
-
-		s5pv210_set_refresh(DMC0, 83000);
-	}
-
-	/*
-	 * APLL should be changed in this level
-	 * APLL -> MPLL(for stable transition) -> APLL
-	 * Some clock source's clock API are not prepared.
-	 * Do not use clock API in below code.
-	 */
-	if (pll_changing) {
-		/*
-		 * 1. Temporary Change divider for MFC and G3D
-		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_DIV2);
-		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
-		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
-			(3 << S5P_CLKDIV2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV2);
-
-		/* For MFC, G3D dividing */
-		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT0);
-		} while (reg & ((1 << 16) | (1 << 17)));
-
-		/*
-		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
-		 * (200/4=50)->(667/4=166)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_SRC2);
-		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
-		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
-			(1 << S5P_CLKSRC2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC2);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT1);
-		} while (reg & ((1 << 7) | (1 << 3)));
-
-		/*
-		 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
-		 * true refresh counter is already programed in upper
-		 * code. 0x287@83Mhz
-		 */
-		if (!bus_speed_changing)
-			s5pv210_set_refresh(DMC1, 133000);
-
-		/* 4. SCLKAPLL -> SCLKMPLL */
-		reg = __raw_readl(S5P_CLK_SRC0);
-		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
-		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC0);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT0);
-		} while (reg & (0x1 << 18));
-
-	}
-
-	/* Change divider */
-	reg = __raw_readl(S5P_CLK_DIV0);
-
-	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
-		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
-		S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
-		S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
-
-	reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
-		(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
-		(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
-		(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
-		(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
-		(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
-		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
-		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
-
-	__raw_writel(reg, S5P_CLK_DIV0);
-
-	do {
-		reg = __raw_readl(S5P_CLKDIV_STAT0);
-	} while (reg & 0xff);
-
-	/* ARM MCS value changed */
-	reg = __raw_readl(S5P_ARM_MCS_CON);
-	reg &= ~0x3;
-	if (index >= L3)
-		reg |= 0x3;
-	else
-		reg |= 0x1;
-
-	__raw_writel(reg, S5P_ARM_MCS_CON);
-
-	if (pll_changing) {
-		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
-		__raw_writel(0x2cf, S5P_APLL_LOCK);
-
-		/*
-		 * 6. Turn on APLL
-		 * 6-1. Set PMS values
-		 * 6-2. Wait untile the PLL is locked
-		 */
-		if (index == L0)
-			__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
-		else
-			__raw_writel(APLL_VAL_800, S5P_APLL_CON);
-
-		do {
-			reg = __raw_readl(S5P_APLL_CON);
-		} while (!(reg & (0x1 << 29)));
-
-		/*
-		 * 7. Change souce clock from SCLKMPLL(667Mhz)
-		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
-		 * (667/4=166)->(200/4=50)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_SRC2);
-		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
-		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
-			(0 << S5P_CLKSRC2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC2);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT1);
-		} while (reg & ((1 << 7) | (1 << 3)));
-
-		/*
-		 * 8. Change divider for MFC and G3D
-		 * (200/4=50)->(200/1=200)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_DIV2);
-		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
-		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
-			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV2);
-
-		/* For MFC, G3D dividing */
-		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT0);
-		} while (reg & ((1 << 16) | (1 << 17)));
-
-		/* 9. Change MPLL to APLL in MSYS_MUX */
-		reg = __raw_readl(S5P_CLK_SRC0);
-		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
-		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC0);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT0);
-		} while (reg & (0x1 << 18));
-
-		/*
-		 * 10. DMC1 refresh counter
-		 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
-		 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
-		 */
-		if (!bus_speed_changing)
-			s5pv210_set_refresh(DMC1, 200000);
-	}
-
-	/*
-	 * L4 level need to change memory bus speed, hence onedram clock divier
-	 * and memory refresh parameter should be changed
-	 */
-	if (bus_speed_changing) {
-		reg = __raw_readl(S5P_CLK_DIV6);
-		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
-		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV6);
-
-		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT1);
-		} while (reg & (1 << 15));
-
-		/* Reconfigure DRAM refresh counter value */
-		if (index != L4) {
-			/*
-			 * DMC0 : 166Mhz
-			 * DMC1 : 200Mhz
-			 */
-			s5pv210_set_refresh(DMC0, 166000);
-			s5pv210_set_refresh(DMC1, 200000);
-		} else {
-			/*
-			 * DMC0 : 83Mhz
-			 * DMC1 : 100Mhz
-			 */
-			s5pv210_set_refresh(DMC0, 83000);
-			s5pv210_set_refresh(DMC1, 100000);
-		}
-	}
-
-	if (freqs.new < freqs.old) {
-		/* Voltage down: will be implemented */
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-#endif
-
-static int check_mem_type(void __iomem *dmc_reg)
-{
-	unsigned long val;
-
-	val = __raw_readl(dmc_reg + 0x4);
-	val = (val & (0xf << 8));
-
-	return val >> 8;
-}
-
-static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned long mem_type;
-
-	cpu_clk = clk_get(NULL, "armclk");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	dmc0_clk = clk_get(NULL, "sclk_dmc0");
-	if (IS_ERR(dmc0_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(dmc0_clk);
-	}
-
-	dmc1_clk = clk_get(NULL, "hclk_msys");
-	if (IS_ERR(dmc1_clk)) {
-		clk_put(dmc0_clk);
-		clk_put(cpu_clk);
-		return PTR_ERR(dmc1_clk);
-	}
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/*
-	 * check_mem_type : This driver only support LPDDR & LPDDR2.
-	 * other memory type is not supported.
-	 */
-	mem_type = check_mem_type(S5P_VA_DMC0);
-
-	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
-		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
-		return -EINVAL;
-	}
-
-	/* Find current refresh counter and frequency each DMC */
-	s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
-	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
-
-	s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
-	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
-
-	policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
-
-	cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
-
-	policy->cpuinfo.transition_latency = 40000;
-
-	return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
-}
-
-static struct cpufreq_driver s5pv210_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= s5pv210_verify_speed,
-	.target		= s5pv210_target,
-	.get		= s5pv210_getspeed,
-	.init		= s5pv210_cpu_init,
-	.name		= "s5pv210",
-#ifdef CONFIG_PM
-	.suspend	= s5pv210_cpufreq_suspend,
-	.resume		= s5pv210_cpufreq_resume,
-#endif
-};
-
-static int __init s5pv210_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&s5pv210_driver);
-}
-
-late_initcall(s5pv210_cpufreq_init);