Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

187 files changed, 6321 insertions, 1758 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e099899..bd6dd6e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -453,6 +453,14 @@ config NODES_SHIFT
 	default "4"
 	depends on NEED_MULTIPLE_NODES
 
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool y
+	depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+	def_bool y
+	depends on NUMA
+
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index ce4c68a..5687e29 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -113,8 +113,13 @@ else
 endif
 endif
 
-CFLAGS-$(CONFIG_PPC64)	:= -mtraceback=no -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv1)
+CFLAGS-$(CONFIG_PPC64)	:= -mtraceback=no
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv2,-mcall-aixdesc)
+AFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv2)
+else
+CFLAGS-$(CONFIG_PPC64)	+= -mcall-aixdesc
+endif
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcmodel=medium,-mminimal-toc)
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mno-pointers-to-nested-functions)
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 $(MULTIPLEWORD)
@@ -153,7 +158,7 @@ CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) $(asinstr)
-KBUILD_AFLAGS	+= -Iarch/$(ARCH)
+KBUILD_AFLAGS	+= -Iarch/$(ARCH) $(AFLAGS-y)
 KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
@@ -161,6 +166,11 @@ CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)
 
 KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
 
+ifeq ($(CONFIG_476FPE_ERR46),y)
+	KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
+		-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
+endif
+
 # No AltiVec or VSX instructions when building kernel
 KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
 KBUILD_CFLAGS += $(call cc-option,-mno-vsx)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index a1f8c7f..426dce7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -22,8 +22,14 @@ all: $(obj)/zImage
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-		 -isystem $(shell $(CROSS32CC) -print-file-name=include) \
-		 -mbig-endian
+		 -isystem $(shell $(CROSS32CC) -print-file-name=include)
+ifdef CONFIG_PPC64_BOOT_WRAPPER
+BOOTCFLAGS	+= -m64
+endif
+ifdef CONFIG_CPU_BIG_ENDIAN
+BOOTCFLAGS	+= -mbig-endian
+endif
+
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
 
 ifdef CONFIG_DEBUG_INFO
@@ -47,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 
@@ -86,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 				cuboot-taishan.c cuboot-katmai.c \
 				cuboot-warp.c cuboot-yosemite.c \
 				treeboot-iss4xx.c treeboot-currituck.c \
+				treeboot-akebono.c \
 				simpleboot.c fixed-head.S virtex.c
 src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
 src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
@@ -99,6 +107,11 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
 src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
 src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
 src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
+src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
+src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELLEB) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S
 
 src-wlib := $(sort $(src-wlib-y))
 src-plat := $(sort $(src-plat-y))
@@ -137,7 +150,11 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc
 $(obj)/empty.c:
 	@touch $@
 
-$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
+$(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S
+	$(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \
+		-D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+
+$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
 	@cp $< $@
 
 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
@@ -235,6 +252,7 @@ image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
 					   treeImage.iss4xx-mpic
 image-$(CONFIG_CURRITUCK)			+= treeImage.currituck
+image-$(CONFIG_AKEBONO)			+= treeImage.akebono
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 349b553..9d9f6f3 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -6,6 +6,8 @@
  *
  * Copyright 2000 Paul Mackerras.
  *
+ * Adapted for 64 bit little endian images by Andrew Tauferner.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -55,36 +57,61 @@ unsigned int rpanote[N_RPA_DESCR] = {
 
 #define ROUNDUP(len)	(((len) + 3) & ~3)
 
-unsigned char buf[512];
+unsigned char buf[1024];
+#define ELFDATA2LSB     1
+#define ELFDATA2MSB     2
+static int e_data = ELFDATA2MSB;
+#define ELFCLASS32      1
+#define ELFCLASS64      2
+static int e_class = ELFCLASS32;
 
 #define GET_16BE(off)	((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off)	((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v)	(buf[off] = ((v) >> 8) & 0xff, \
-				 buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v)	(PUT_16BE((off), (v) >> 16), \
-				 PUT_16BE((off) + 2, (v)))
+#define GET_32BE(off)	((GET_16BE(off) << 16U) + GET_16BE((off)+2U))
+#define GET_64BE(off)	((((unsigned long long)GET_32BE(off)) << 32ULL) + \
+			((unsigned long long)GET_32BE((off)+4ULL)))
+#define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \
+			 buf[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v)))
+#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \
+			  PUT_32BE((off) + 4, (v))))
+
+#define GET_16LE(off)	((buf[off]) + (buf[(off)+1] << 8))
+#define GET_32LE(off)	(GET_16LE(off) + (GET_16LE((off)+2U) << 16U))
+#define GET_64LE(off)	((unsigned long long)GET_32LE(off) + \
+			(((unsigned long long)GET_32LE((off)+4ULL)) << 32ULL))
+#define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \
+			  buf[(off) + 1] = ((v) >> 8) & 0xff)
+#define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L))
+#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L))
+
+#define GET_16(off)	(e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off))
+#define GET_32(off)	(e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off))
+#define GET_64(off)	(e_data == ELFDATA2MSB ? GET_64BE(off) : GET_64LE(off))
+#define PUT_16(off, v)	(e_data == ELFDATA2MSB ? PUT_16BE(off, v) : \
+			 PUT_16LE(off, v))
+#define PUT_32(off, v)  (e_data == ELFDATA2MSB ? PUT_32BE(off, v) : \
+			 PUT_32LE(off, v))
+#define PUT_64(off, v)  (e_data == ELFDATA2MSB ? PUT_64BE(off, v) : \
+			 PUT_64LE(off, v))
 
 /* Structure of an ELF file */
 #define E_IDENT		0	/* ELF header */
-#define	E_PHOFF		28
-#define E_PHENTSIZE	42
-#define E_PHNUM		44
-#define E_HSIZE		52	/* size of ELF header */
+#define	E_PHOFF		(e_class == ELFCLASS32 ? 28 : 32)
+#define E_PHENTSIZE	(e_class == ELFCLASS32 ? 42 : 54)
+#define E_PHNUM		(e_class == ELFCLASS32 ? 44 : 56)
+#define E_HSIZE		(e_class == ELFCLASS32 ? 52 : 64)
 
 #define EI_MAGIC	0	/* offsets in E_IDENT area */
 #define EI_CLASS	4
 #define EI_DATA		5
 
 #define PH_TYPE		0	/* ELF program header */
-#define PH_OFFSET	4
-#define PH_FILESZ	16
-#define PH_HSIZE	32	/* size of program header */
+#define PH_OFFSET	(e_class == ELFCLASS32 ? 4 : 8)
+#define PH_FILESZ	(e_class == ELFCLASS32 ? 16 : 32)
+#define PH_HSIZE	(e_class == ELFCLASS32 ? 32 : 56)
 
 #define PT_NOTE		4	/* Program header type = note */
 
-#define ELFCLASS32	1
-#define ELFDATA2MSB	2
 
 unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
 
@@ -92,8 +119,8 @@ int
 main(int ac, char **av)
 {
 	int fd, n, i;
-	int ph, ps, np;
-	int nnote, nnote2, ns;
+	unsigned long ph, ps, np;
+	long nnote, nnote2, ns;
 
 	if (ac != 2) {
 		fprintf(stderr, "Usage: %s elf-file\n", av[0]);
@@ -114,26 +141,27 @@ main(int ac, char **av)
 		exit(1);
 	}
 
-	if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+	if (memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+		goto notelf;
+	e_class = buf[E_IDENT+EI_CLASS];
+	if (e_class != ELFCLASS32 && e_class != ELFCLASS64)
+		goto notelf;
+	e_data = buf[E_IDENT+EI_DATA];
+	if (e_data != ELFDATA2MSB && e_data != ELFDATA2LSB)
+		goto notelf;
+	if (n < E_HSIZE)
 		goto notelf;
 
-	if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
-	    || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
-		fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
-			av[1]);
-		exit(1);
-	}
-
-	ph = GET_32BE(E_PHOFF);
-	ps = GET_16BE(E_PHENTSIZE);
-	np = GET_16BE(E_PHNUM);
+	ph = (e_class == ELFCLASS32 ? GET_32(E_PHOFF) : GET_64(E_PHOFF));
+	ps = GET_16(E_PHENTSIZE);
+	np = GET_16(E_PHNUM);
 	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
 		goto notelf;
 	if (ph + (np + 2) * ps + nnote + nnote2 > n)
 		goto nospace;
 
 	for (i = 0; i < np; ++i) {
-		if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+		if (GET_32(ph + PH_TYPE) == PT_NOTE) {
 			fprintf(stderr, "%s already has a note entry\n",
 				av[1]);
 			exit(0);
@@ -148,15 +176,22 @@ main(int ac, char **av)
 
 	/* fill in the program header entry */
 	ns = ph + 2 * ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote);
+	PUT_32(ph + PH_TYPE, PT_NOTE);
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_OFFSET, ns);
+	else
+		PUT_64(ph + PH_OFFSET, ns);
+
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_FILESZ, nnote);
+	else
+		PUT_64(ph + PH_FILESZ, nnote);
 
 	/* fill in the note area we point to */
 	/* XXX we should probably make this a proper section */
-	PUT_32BE(ns, strlen(arch) + 1);
-	PUT_32BE(ns + 4, N_DESCR * 4);
-	PUT_32BE(ns + 8, 0x1275);
+	PUT_32(ns, strlen(arch) + 1);
+	PUT_32(ns + 4, N_DESCR * 4);
+	PUT_32(ns + 8, 0x1275);
 	strcpy((char *) &buf[ns + 12], arch);
 	ns += 12 + strlen(arch) + 1;
 	for (i = 0; i < N_DESCR; ++i, ns += 4)
@@ -164,21 +199,28 @@ main(int ac, char **av)
 
 	/* fill in the second program header entry and the RPA note area */
 	ph += ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote2);
+	PUT_32(ph + PH_TYPE, PT_NOTE);
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_OFFSET, ns);
+	else
+		PUT_64(ph + PH_OFFSET, ns);
+
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_FILESZ, nnote);
+	else
+		PUT_64(ph + PH_FILESZ, nnote2);
 
 	/* fill in the note area we point to */
-	PUT_32BE(ns, strlen(rpaname) + 1);
-	PUT_32BE(ns + 4, sizeof(rpanote));
-	PUT_32BE(ns + 8, 0x12759999);
+	PUT_32(ns, strlen(rpaname) + 1);
+	PUT_32(ns + 4, sizeof(rpanote));
+	PUT_32(ns + 8, 0x12759999);
 	strcpy((char *) &buf[ns + 12], rpaname);
 	ns += 12 + ROUNDUP(strlen(rpaname) + 1);
 	for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
 		PUT_32BE(ns, rpanote[i]);
 
 	/* Update the number of program headers */
-	PUT_16BE(E_PHNUM, np + 2);
+	PUT_16(E_PHNUM, np + 2);
 
 	/* write back */
 	lseek(fd, (long) 0, SEEK_SET);
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 0f7428a..14de4f8 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -1,17 +1,20 @@
 /*
  * Copyright (C) Paul Mackerras 1997.
  *
+ * Adapted for 64 bit LE PowerPC by Andrew Tauferner
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * NOTE: this code runs in 32 bit mode, is position-independent,
- * and is packaged as ELF32.
  */
 
 #include "ppc_asm.h"
 
+RELA = 7
+RELACOUNT = 0x6ffffff9
+
 	.text
 	/* A procedure descriptor used when booting this as a COFF file.
 	 * When making COFF, this comes first in the link and we're
@@ -21,6 +24,20 @@
 _zimage_start_opd:
 	.long	0x500000, 0, 0, 0
 
+#ifdef __powerpc64__
+.balign 8
+p_start:	.llong	_start
+p_etext:	.llong	_etext
+p_bss_start:	.llong	__bss_start
+p_end:		.llong	_end
+
+p_toc:		.llong	__toc_start + 0x8000 - p_base
+p_dyn:		.llong	__dynamic_start - p_base
+p_rela:		.llong	__rela_dyn_start - p_base
+p_prom:		.llong	0
+	.weak	_platform_stack_top
+p_pstack:	.llong	_platform_stack_top
+#else
 p_start:	.long	_start
 p_etext:	.long	_etext
 p_bss_start:	.long	__bss_start
@@ -28,6 +45,7 @@ p_end:		.long	_end
 
 	.weak	_platform_stack_top
 p_pstack:	.long	_platform_stack_top
+#endif
 
 	.weak	_zimage_start
 	.globl	_zimage_start
@@ -38,6 +56,7 @@ _zimage_start_lib:
 	   and the address where we're running. */
 	bl	.+4
 p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
+#ifndef __powerpc64__
 	/* grab the link address of the dynamic section in r11 */
 	addis	r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
 	lwz	r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
@@ -51,8 +70,6 @@ p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
 
 	/* The dynamic section contains a series of tagged entries.
 	 * We need the RELA and RELACOUNT entries. */
-RELA = 7
-RELACOUNT = 0x6ffffff9
 	li	r9,0
 	li	r0,0
 9:	lwz	r8,0(r12)	/* get tag */
@@ -120,9 +137,164 @@ RELACOUNT = 0x6ffffff9
 	li	r0,0
 	stwu	r0,-16(r1)	/* establish a stack frame */
 6:
+#else /* __powerpc64__ */
+	/* Save the prom pointer at p_prom. */
+	std	r5,(p_prom-p_base)(r10)
+
+	/* Set r2 to the TOC. */
+	ld	r2,(p_toc-p_base)(r10)
+	add	r2,r2,r10
+
+	/* Grab the link address of the dynamic section in r11. */
+	ld	r11,-32768(r2)
+	cmpwi	r11,0
+	beq	3f              /* if not linked -pie then no dynamic section */
+
+	ld	r11,(p_dyn-p_base)(r10)
+	add	r11,r11,r10
+	ld	r9,(p_rela-p_base)(r10)
+	add	r9,r9,r10
 
+	li	r7,0
+	li	r8,0
+9:	ld	r6,0(r11)       /* get tag */
+	cmpdi	r6,0
+	beq	12f              /* end of list */
+	cmpdi	r6,RELA
+	bne	10f
+	ld	r7,8(r11)       /* get RELA pointer in r7 */
+	b	11f
+10:	addis	r6,r6,(-RELACOUNT)@ha
+	cmpdi	r6,RELACOUNT@l
+	bne	11f
+	ld	r8,8(r11)       /* get RELACOUNT value in r8 */
+11:	addi	r11,r11,16
+	b	9b
+12:
+	cmpdi	r7,0            /* check we have both RELA and RELACOUNT */
+	cmpdi	cr1,r8,0
+	beq	3f
+	beq	cr1,3f
+
+	/* Calcuate the runtime offset. */
+	subf	r7,r7,r9
+
+	/* Run through the list of relocations and process the
+	 * R_PPC64_RELATIVE ones. */
+	mtctr	r8
+13:	ld	r0,8(r9)        /* ELF64_R_TYPE(reloc->r_info) */
+	cmpdi	r0,22           /* R_PPC64_RELATIVE */
+	bne	3f
+	ld	r6,0(r9)        /* reloc->r_offset */
+	ld	r0,16(r9)       /* reloc->r_addend */
+	add	r0,r0,r7
+	stdx	r0,r7,r6
+	addi	r9,r9,24
+	bdnz	13b
+
+	/* Do a cache flush for our text, in case the loader didn't */
+3:	ld	r9,p_start-p_base(r10)	/* note: these are relocated now */
+	ld	r8,p_etext-p_base(r10)
+4:	dcbf	r0,r9
+	icbi	r0,r9
+	addi	r9,r9,0x20
+	cmpld	cr0,r9,r8
+	blt	4b
+	sync
+	isync
+
+	/* Clear the BSS */
+	ld	r9,p_bss_start-p_base(r10)
+	ld	r8,p_end-p_base(r10)
+	li	r0,0
+5:	std	r0,0(r9)
+	addi	r9,r9,8
+	cmpld	cr0,r9,r8
+	blt	5b
+
+	/* Possibly set up a custom stack */
+	ld	r8,p_pstack-p_base(r10)
+	cmpdi	r8,0
+	beq	6f
+	ld	r1,0(r8)
+	li	r0,0
+	stdu	r0,-16(r1)	/* establish a stack frame */
+6:
+#endif  /* __powerpc64__ */
 	/* Call platform_init() */
 	bl	platform_init
 
 	/* Call start */
 	b	start
+
+#ifdef __powerpc64__
+
+#define PROM_FRAME_SIZE 512
+#define SAVE_GPR(n, base)       std     n,8*(n)(base)
+#define REST_GPR(n, base)       ld      n,8*(n)(base)
+#define SAVE_2GPRS(n, base)     SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)     SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)     SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)    SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base)     REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)     REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)     REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)    REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+/* prom handles the jump into and return from firmware.  The prom args pointer
+   is loaded in r3. */
+.globl prom
+prom:
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
+
+	SAVE_GPR(2, r1)
+	SAVE_GPR(13, r1)
+	SAVE_8GPRS(14, r1)
+	SAVE_10GPRS(22, r1)
+	mfcr    r10
+	std     r10,8*32(r1)
+	mfmsr   r10
+	std     r10,8*33(r1)
+
+	/* remove MSR_LE from msr but keep MSR_SF */
+	mfmsr	r10
+	rldicr	r10,r10,0,62
+	mtsrr1	r10
+
+	/* Load FW address, set LR to label 1, and jump to FW */
+	bl	0f
+0:	mflr	r10
+	addi	r11,r10,(1f-0b)
+	mtlr	r11
+
+	ld	r10,(p_prom-0b)(r10)
+	mtsrr0	r10
+
+	rfid
+
+1:	/* Return from OF */
+	FIXUP_ENDIAN
+
+	/* Restore registers and return. */
+	rldicl  r1,r1,0,32
+
+	/* Restore the MSR (back to 64 bits) */
+	ld      r10,8*(33)(r1)
+	mtmsr	r10
+	isync
+
+	/* Restore other registers */
+	REST_GPR(2, r1)
+	REST_GPR(13, r1)
+	REST_8GPRS(14, r1)
+	REST_10GPRS(22, r1)
+	ld      r10,8*32(r1)
+	mtcr	r10
+
+	addi    r1,r1,PROM_FRAME_SIZE
+	ld      r0,16(r1)
+	mtlr    r0
+	blr
+#endif
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index cc73f7a..bf8f4ed 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -15,6 +15,10 @@
 		asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
 		rval; \
 	})
+#define mtdcrx(rn, val) \
+	({	\
+		asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \
+	})
 
 /* 440GP/440GX SDRAM controller DCRs */
 #define DCRN_SDRAM0_CFGADDR				0x010
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
new file mode 100644
index 0000000..f92ecfe
--- /dev/null
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,akebono";
+	compatible = "ibm,akebono", "ibm,476gtr";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		single-cpu-affinity;
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		HSTA0: hsta@310000e0000 {
+			compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+			reg = <0x310 0x000e0000 0x0 0xf0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <108 0
+				      109 0
+				      110 0
+				      111 0
+				      112 0
+				      113 0
+				      114 0
+				      115 0
+				      116 0
+				      117 0
+				      118 0
+				      119 0
+				      120 0
+				      121 0
+				      122 0
+				      123 0>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+			dcr-reg = <0xc0000000 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <	/*TXEOB*/ 77 0x4
+					/*RXEOB*/ 78 0x4
+					/*SERR*/  76 0x4
+					/*TXDE*/  79 0x4
+					/*RXDE*/  80 0x4>;
+		};
+
+		SATA0: sata@30000010000 {
+			compatible = "ibm,476gtr-ahci";
+			reg = <0x300 0x00010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <93 2>;
+		};
+
+		EHCI0: ehci@30010000000 {
+			compatible = "ibm,476gtr-ehci", "generic-ehci";
+			reg = <0x300 0x10000000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <85 2>;
+		};
+
+		SD0: sd@30000000000 {
+			compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+			reg = <0x300 0x00000000 0x0 0x10000>;
+			interrupts = <91 2>;
+			interrupt-parent = <&MPIC>;
+		};
+
+		OHCI0: ohci@30010010000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <89 1>;
+			};
+
+		OHCI1: ohci@30010020000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10020000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <88 1>;
+			};
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+				  0x80000000 0x0000033f 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			RGMII0: emac-rgmii-wol@50004 {
+				compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+				reg = <0x50004 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@30000 {
+				device_type = "network";
+				compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+						 /*Wake*/   0x1 &MPIC 82 0x4>;
+				reg = <0x30000 0x78>;
+
+				/* local-mac-address will normally be added by
+				 * the wrapper. If your device doesn't support
+				 * passing data to the wrapper (in the form
+				 * local-mac-addr=<hwaddr>) then you will need
+				 * to set it manually here. */
+				//local-mac-address = [000000000000];
+
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-wol-device = <&RGMII0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			UART0: serial@10000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000 0x00000008>;
+				virtual-reg = <0xe8010000>;
+				clock-frequency = <1851851>;
+				current-speed = <38400>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <39 2>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x0 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <37 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80", "m41st85";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@00000100 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x100 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <38 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				avr@58 {
+					compatible = "ibm,akebono-avr";
+					reg = <0x58>;
+				};
+			};
+
+			FPGA0: fpga@ebc00000 {
+				compatible = "ibm,akebono-fpga";
+				reg = <0xebc00000 0x8>;
+			};
+		};
+
+		PCIE0: pciex@10100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xc0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@20100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000201 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000200 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x100 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000240 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@18100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000181 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000180 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xe0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000001c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+		};
+
+		PCIE3: pciex@28100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x3>; /* port number */
+			reg = <0x00000281 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000280 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x120 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000002c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts
index 7290021..85646b4 100644
--- a/arch/powerpc/boot/dts/b4860emu.dts
+++ b/arch/powerpc/boot/dts/b4860emu.dts
@@ -61,21 +61,25 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 	};
 };
@@ -157,7 +161,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,b4-corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 0>;
 		fsl,ccf-num-csdids = <32>;
@@ -167,6 +171,7 @@
 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x4000>;
+		fsl,portid-mapping = <0x8000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupts = <
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts
new file mode 100644
index 0000000..6cab106
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9132qds.dts
@@ -0,0 +1,35 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9132si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9132qds";
+	compatible = "fsl,bsc9132qds";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@ff71e000 {
+		/* NOR, NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+			  0x1 0x0 0x0 0xff800000 0x00010000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "fsl/bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi
new file mode 100644
index 0000000..af8e888
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi
@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x4000>;
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <30000000>;
+		};
+	};
+
+	i2c@3000 {
+		fpga: fpga@66 {
+			compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+			reg = <0x66>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x1f>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
index 60566f99..d678944 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -76,10 +76,6 @@
 		compatible = "fsl,b4420-l3-cache-controller", "cache";
 	};
 
-	corenet-cf@18000 {
-		compatible = "fsl,b4420-corenet-cf";
-	};
-
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
 	};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 2419731..338af7e 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -66,12 +66,14 @@
 			reg = <0 1>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index cbc354b..582381d 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -120,10 +120,6 @@
 		compatible = "fsl,b4860-l3-cache-controller", "cache";
 	};
 
-	corenet-cf@18000 {
-		compatible = "fsl,b4860-corenet-cf";
-	};
-
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
 	};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 142ac86..1948f73 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -66,24 +66,28 @@
 			reg = <0 1>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 4f6e482..1a54ba7 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -158,7 +158,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,b4-corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 0>;
 		fsl,ccf-num-csdids = <32>;
@@ -168,6 +168,7 @@
 	iommu@20000 {
 		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x4000>;
+		fsl,portid-mapping = <0x8000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupts = <
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
new file mode 100644
index 0000000..c723071
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
@@ -0,0 +1,185 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	/* FIXME: Test whether interrupts are split */
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9132-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9132-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9132-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
new file mode 100644
index 0000000..301a9db
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: PowerPC,e500v2@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index e2987a3..5290df8 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -246,7 +246,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -262,6 +262,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index 22f3b14..b1ea147 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -83,6 +83,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -92,6 +93,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -101,6 +103,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -110,6 +113,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 7af6d45..cd63cb1 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -273,7 +273,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -289,6 +289,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index 468e8be..dc5f4b3 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -84,6 +84,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -93,6 +94,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -102,6 +104,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -111,6 +114,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 2415e1f..12947cc 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -281,7 +281,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -297,6 +297,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x00f80000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 0040b5a5..38bde09 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -83,6 +83,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -92,6 +93,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -101,6 +103,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -110,6 +113,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -119,6 +123,7 @@
 			reg = <4>;
 			clocks = <&mux4>;
 			next-level-cache = <&L2_4>;
+			fsl,portid-mapping = <0x08000000>;
 			L2_4: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -128,6 +133,7 @@
 			reg = <5>;
 			clocks = <&mux5>;
 			next-level-cache = <&L2_5>;
+			fsl,portid-mapping = <0x04000000>;
 			L2_5: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -137,6 +143,7 @@
 			reg = <6>;
 			clocks = <&mux6>;
 			next-level-cache = <&L2_6>;
+			fsl,portid-mapping = <0x02000000>;
 			L2_6: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -146,6 +153,7 @@
 			reg = <7>;
 			clocks = <&mux7>;
 			next-level-cache = <&L2_7>;
+			fsl,portid-mapping = <0x01000000>;
 			L2_7: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 2985de4..4c4a2b0 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -278,7 +278,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -294,6 +294,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x3c000000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index fe1a2e6..1cc61e1 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -90,6 +90,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -99,6 +100,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 546a899..67296fd 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -233,7 +233,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -248,6 +248,7 @@
 		#size-cells = <1>;
 		interrupts = <24 2 0 0
 			      16 2 1 30>;
+		fsl,portid-mapping = <0x0f800000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index 3674686..b048a2b 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -83,6 +83,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -92,6 +93,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -101,6 +103,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -110,6 +113,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
new file mode 100644
index 0000000..12e597e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -0,0 +1,430 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&pci3 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1040-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <16 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-2.0";
+			clock-output-names = "sysclk", "fixed-clock";
+		};
+
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux1";
+		};
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0_0", "pll0_1", "pll0_2",
+				"pll1_0", "pll1_1", "pll1_2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1040-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1040-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+	display@180000 {
+		compatible = "fsl,t1040-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec5.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
new file mode 100644
index 0000000..319b74f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
new file mode 100644
index 0000000..bbb7025
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -0,0 +1,104 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index f99d74f..793669b 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -343,7 +343,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -353,6 +353,7 @@
 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x6000>;
+		fsl,portid-mapping = <0x8000>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 0b8ccc5..d2f157e 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -69,72 +69,84 @@
 			reg = <0 1>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu4: PowerPC,e6500@8 {
 			device_type = "cpu";
 			reg = <8 9>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu5: PowerPC,e6500@10 {
 			device_type = "cpu";
 			reg = <10 11>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu6: PowerPC,e6500@12 {
 			device_type = "cpu";
 			reg = <12 13>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu7: PowerPC,e6500@14 {
 			device_type = "cpu";
 			reg = <14 15>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu8: PowerPC,e6500@16 {
 			device_type = "cpu";
 			reg = <16 17>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu9: PowerPC,e6500@18 {
 			device_type = "cpu";
 			reg = <18 19>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu10: PowerPC,e6500@20 {
 			device_type = "cpu";
 			reg = <20 21>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu11: PowerPC,e6500@22 {
 			device_type = "cpu";
 			reg = <22 23>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/kmcoge4.dts
new file mode 100644
index 0000000..89b4119
--- /dev/null
+++ b/arch/powerpc/boot/dts/kmcoge4.dts
@@ -0,0 +1,152 @@
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p2041si-pre.dtsi"
+
+/ {
+	model = "keymile,kmcoge4";
+	compatible = "keymile,kmcoge4", "keymile,kmp204x";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl256s1";
+				reg = <0>;
+				spi-max-frequency = <20000000>; /* input clock */
+			};
+
+			network_clock@1 {
+				compatible = "zarlink,zl30343";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,m25p32";
+				reg = <2>;
+				spi-max-frequency = <15000000>;
+			};
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+
+		sata@221000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		status = "disabled";
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
+			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
+			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
+			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0 0 0x40000>;
+		};
+
+		board-control@1,0 {
+			compatible = "keymile,qriox";
+			reg = <1 0 0x80>;
+		};
+
+		chassis-mgmt@3,0 {
+			compatible = "keymile,bfticu";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <3 0 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/oca4080.dts
new file mode 100644
index 0000000..3d4c751
--- /dev/null
+++ b/arch/powerpc/boot/dts/oca4080.dts
@@ -0,0 +1,118 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,OCA4080";
+	compatible = "fsl,OCA4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118000 {
+			status = "disabled";
+		};
+
+		i2c@118100 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xef800000 0x800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		status = "disabled";
+	};
+};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
deleted file mode 100644
index beb6cb1..0000000
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * P1023 RDS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
-	model = "fsl,P1023";
-	compatible = "fsl,P1023RDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ff600000 {
-		ranges = <0x0 0x0 0xff600000 0x200000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-			fsl_dataflash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at45db081d";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					/* 512KB for u-boot Bootloader Image */
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00080000>;
-					read-only;
-				};
-				partition@dtb {
-					/* 512KB for DTB Image */
-					label = "dtb-spi";
-					reg = <0x00080000 0x00080000>;
-					read-only;
-				};
-			};
-		};
-
-		usb@22000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	lbc: localbus@ff605000 {
-		reg = <0 0xff605000 0 0x1000>;
-
-		/* NOR Flash, BCSR */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xe0000000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
-			device-width = <1>;
-			partition@0 {
-				label = "ramdisk";
-				reg = <0x00000000 0x01c00000>;
-			};
-			partition@1c00000 {
-				label = "kernel";
-				reg = <0x01c00000 0x002e0000>;
-			};
-			partiton@1ee0000 {
-				label = "dtb";
-				reg = <0x01ee0000 0x00020000>;
-			};
-			partition@1f00000 {
-				label = "firmware";
-				reg = <0x01f00000 0x00080000>;
-				read-only;
-			};
-			partition@1f80000 {
-				label = "u-boot";
-				reg = <0x01f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		fpga@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1023rds-fpga";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr@20 {
-				compatible = "fsl,p1023rds-bcsr";
-				reg = <0x20 0x20>;
-			};
-		};
-	};
-
-	pci0: pcie@ff60a000 {
-		reg = <0 0xff60a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			/* IRQ[0:3] are pulled up on board, set to active-low */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 0 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	board_pci1: pci1: pcie@ff609000 {
-		reg = <0 0xff609000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[4:6] only for PCIe, set to active-high,
-			 * IRQ[7] is pulled up on board, set to active-low
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 2 0 0
-				0000 0 0 2 &mpic 5 2 0 0
-				0000 0 0 3 &mpic 6 2 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ff60b000 {
-		reg = <0 0xff60b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[8:10] are pulled up on board, set to active-low
-			 * IRQ[11] only for PCIe, set to active-high,
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 8 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 2 0 0
-				>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/t1040qds.dts
new file mode 100644
index 0000000..973c29c
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1040qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1040QDS";
+	compatible = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/t1042qds.dts
new file mode 100644
index 0000000..45bd037
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1042qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1042QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1042QDS";
+	compatible = "fsl,T1042QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/t104xqds.dtsi
new file mode 100644
index 0000000..234f4b5
--- /dev/null
+++ b/arch/powerpc/boot/dts/t104xqds.dtsi
@@ -0,0 +1,166 @@
+/*
+ * T104xQDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "philips,pca9547";
+				reg = <0x77>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts
index ee24ab3..bc12127a 100644
--- a/arch/powerpc/boot/dts/t4240emu.dts
+++ b/arch/powerpc/boot/dts/t4240emu.dts
@@ -60,63 +60,75 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 
 		cpu4: PowerPC,e6500@8 {
 			device_type = "cpu";
 			reg = <8 9>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu5: PowerPC,e6500@10 {
 			device_type = "cpu";
 			reg = <10 11>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu6: PowerPC,e6500@12 {
 			device_type = "cpu";
 			reg = <12 13>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu7: PowerPC,e6500@14 {
 			device_type = "cpu";
 			reg = <14 15>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 
 		cpu8: PowerPC,e6500@16 {
 			device_type = "cpu";
 			reg = <16 17>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu9: PowerPC,e6500@18 {
 			device_type = "cpu";
 			reg = <18 19>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu10: PowerPC,e6500@20 {
 			device_type = "cpu";
 			reg = <20 21>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu11: PowerPC,e6500@22 {
 			device_type = "cpu";
 			reg = <22 23>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 	};
 };
@@ -213,7 +225,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -223,6 +235,7 @@
 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x6000>;
+		fsl,portid-mapping = <0x8000>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c
index 1567a0c..316552d 100644
--- a/arch/powerpc/boot/elf_util.c
+++ b/arch/powerpc/boot/elf_util.c
@@ -26,7 +26,11 @@ int parse_elf64(void *hdr, struct elf_info *info)
 	      elf64->e_ident[EI_MAG2]  == ELFMAG2	&&
 	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
 	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
+#ifdef __LITTLE_ENDIAN__
+	      elf64->e_ident[EI_DATA]  == ELFDATA2LSB	&&
+#else
 	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+#endif
 	      (elf64->e_type            == ET_EXEC ||
 	       elf64->e_type            == ET_DYN)	&&
 	      elf64->e_machine         == EM_PPC64))
diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c
index 62e2f43..7ca910c 100644
--- a/arch/powerpc/boot/of.c
+++ b/arch/powerpc/boot/of.c
@@ -40,8 +40,8 @@ static void *of_try_claim(unsigned long size)
 #ifdef DEBUG
 		printf("    trying: 0x%08lx\n\r", claim_base);
 #endif
-		addr = (unsigned long)of_claim(claim_base, size, 0);
-		if ((void *)addr != (void *)-1)
+		addr = (unsigned long) of_claim(claim_base, size, 0);
+		if (addr != PROM_ERROR)
 			break;
 	}
 	if (addr == 0)
diff --git a/arch/powerpc/boot/of.h b/arch/powerpc/boot/of.h
index e4c68f7..c8c1750 100644
--- a/arch/powerpc/boot/of.h
+++ b/arch/powerpc/boot/of.h
@@ -1,12 +1,15 @@
 #ifndef _PPC_BOOT_OF_H_
 #define _PPC_BOOT_OF_H_
 
+#include "swab.h"
+
 typedef void *phandle;
-typedef void *ihandle;
+typedef u32 ihandle;
 
 void of_init(void *promptr);
 int of_call_prom(const char *service, int nargs, int nret, ...);
-void *of_claim(unsigned long virt, unsigned long size, unsigned long align);
+unsigned int of_claim(unsigned long virt, unsigned long size,
+	unsigned long align);
 void *of_vmlinux_alloc(unsigned long size);
 void of_exit(void);
 void *of_finddevice(const char *name);
@@ -18,4 +21,16 @@ int of_setprop(const void *phandle, const char *name, const void *buf,
 /* Console functions */
 void of_console_init(void);
 
+typedef u32			__be32;
+
+#ifdef __LITTLE_ENDIAN__
+#define cpu_to_be32(x) swab32(x)
+#define be32_to_cpu(x) swab32(x)
+#else
+#define cpu_to_be32(x) (x)
+#define be32_to_cpu(x) (x)
+#endif
+
+#define PROM_ERROR (-1u)
+
 #endif /* _PPC_BOOT_OF_H_ */
diff --git a/arch/powerpc/boot/ofconsole.c b/arch/powerpc/boot/ofconsole.c
index ce0e024..8b75470 100644
--- a/arch/powerpc/boot/ofconsole.c
+++ b/arch/powerpc/boot/ofconsole.c
@@ -18,7 +18,7 @@
 
 #include "of.h"
 
-static void *of_stdout_handle;
+static unsigned int of_stdout_handle;
 
 static int of_console_open(void)
 {
@@ -27,8 +27,10 @@ static int of_console_open(void)
 	if (((devp = of_finddevice("/chosen")) != NULL)
 	    && (of_getprop(devp, "stdout", &of_stdout_handle,
 			   sizeof(of_stdout_handle))
-		== sizeof(of_stdout_handle)))
+		== sizeof(of_stdout_handle))) {
+		of_stdout_handle = be32_to_cpu(of_stdout_handle);
 		return 0;
+	}
 
 	return -1;
 }
diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c
index b0ec9cf..46c98a4 100644
--- a/arch/powerpc/boot/oflib.c
+++ b/arch/powerpc/boot/oflib.c
@@ -16,74 +16,83 @@
 
 #include "of.h"
 
+typedef u32 prom_arg_t;
+
+/* The following structure is used to communicate with open firmware.
+ * All arguments in and out are in big endian format. */
+struct prom_args {
+	__be32 service;	/* Address of service name string. */
+	__be32 nargs;	/* Number of input arguments. */
+	__be32 nret;	/* Number of output arguments. */
+	__be32 args[10];	/* Input/output arguments. */
+};
+
+#ifdef __powerpc64__
+extern int prom(void *);
+#else
 static int (*prom) (void *);
+#endif
 
 void of_init(void *promptr)
 {
+#ifndef __powerpc64__
 	prom = (int (*)(void *))promptr;
+#endif
 }
 
+#define ADDR(x)		(u32)(unsigned long)(x)
+
 int of_call_prom(const char *service, int nargs, int nret, ...)
 {
 	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
+	struct prom_args args;
 	va_list list;
 
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
+	args.service = cpu_to_be32(ADDR(service));
+	args.nargs = cpu_to_be32(nargs);
+	args.nret = cpu_to_be32(nret);
 
 	va_start(list, nret);
 	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
+		args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
 		args.args[nargs+i] = 0;
 
 	if (prom(&args) < 0)
-		return -1;
+		return PROM_ERROR;
 
-	return (nret > 0)? args.args[nargs]: 0;
+	return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
 }
 
 static int of_call_prom_ret(const char *service, int nargs, int nret,
-			    unsigned int *rets, ...)
+			    prom_arg_t *rets, ...)
 {
 	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
+	struct prom_args args;
 	va_list list;
 
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
+	args.service = cpu_to_be32(ADDR(service));
+	args.nargs = cpu_to_be32(nargs);
+	args.nret = cpu_to_be32(nret);
 
 	va_start(list, rets);
 	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
+		args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
 		args.args[nargs+i] = 0;
 
 	if (prom(&args) < 0)
-		return -1;
+		return PROM_ERROR;
 
-	if (rets != (void *) 0)
+	if (rets != NULL)
 		for (i = 1; i < nret; ++i)
-			rets[i-1] = args.args[nargs+i];
+			rets[i-1] = be32_to_cpu(args.args[nargs+i]);
 
-	return (nret > 0)? args.args[nargs]: 0;
+	return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
 }
 
 /* returns true if s2 is a prefix of s1 */
@@ -103,7 +112,7 @@ static int string_match(const char *s1, const char *s2)
  */
 static int need_map = -1;
 static ihandle chosen_mmu;
-static phandle memory;
+static ihandle memory;
 
 static int check_of_version(void)
 {
@@ -132,10 +141,10 @@ static int check_of_version(void)
 		printf("no mmu\n");
 		return 0;
 	}
-	memory = (ihandle) of_call_prom("open", 1, 1, "/memory");
-	if (memory == (ihandle) -1) {
-		memory = (ihandle) of_call_prom("open", 1, 1, "/memory@0");
-		if (memory == (ihandle) -1) {
+	memory = of_call_prom("open", 1, 1, "/memory");
+	if (memory == PROM_ERROR) {
+		memory = of_call_prom("open", 1, 1, "/memory@0");
+		if (memory == PROM_ERROR) {
 			printf("no memory node\n");
 			return 0;
 		}
@@ -144,40 +153,41 @@ static int check_of_version(void)
 	return 1;
 }
 
-void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
+unsigned int of_claim(unsigned long virt, unsigned long size,
+		      unsigned long align)
 {
 	int ret;
-	unsigned int result;
+	prom_arg_t result;
 
 	if (need_map < 0)
 		need_map = check_of_version();
 	if (align || !need_map)
-		return (void *) of_call_prom("claim", 3, 1, virt, size, align);
+		return of_call_prom("claim", 3, 1, virt, size, align);
 
 	ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", memory,
 			       align, size, virt);
 	if (ret != 0 || result == -1)
-		return (void *) -1;
+		return  -1;
 	ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
 			       align, size, virt);
 	/* 0x12 == coherent + read/write */
 	ret = of_call_prom("call-method", 6, 1, "map", chosen_mmu,
 			   0x12, size, virt, virt);
-	return (void *) virt;
+	return virt;
 }
 
 void *of_vmlinux_alloc(unsigned long size)
 {
 	unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
-	void *addr;
+	unsigned long addr;
 	void *p;
 
 	/* With some older POWER4 firmware we need to claim the area the kernel
 	 * will reside in.  Newer firmwares don't need this so we just ignore
 	 * the return value.
 	 */
-	addr = of_claim(start, end - start, 0);
-	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+	addr = (unsigned long) of_claim(start, end - start, 0);
+	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %lx\r\n",
 	       start, end, end - start, addr);
 
 	p = malloc(size);
@@ -197,7 +207,7 @@ void of_exit(void)
  */
 void *of_finddevice(const char *name)
 {
-	return (phandle) of_call_prom("finddevice", 1, 1, name);
+	return (void *) (unsigned long) of_call_prom("finddevice", 1, 1, name);
 }
 
 int of_getprop(const void *phandle, const char *name, void *buf,
diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h
index eb0e98b..35ea60c 100644
--- a/arch/powerpc/boot/ppc_asm.h
+++ b/arch/powerpc/boot/ppc_asm.h
@@ -62,4 +62,16 @@
 #define SPRN_TBRL	268
 #define SPRN_TBRU	269
 
+#define FIXUP_ENDIAN						   \
+	tdi   0, 0, 0x48; /* Reverse endian of b . + 8		*/ \
+	b     $+36;	  /* Skip trampoline if endian is good	*/ \
+	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
+	.long 0xa602487d; /* mflr r10				*/ \
+	.long 0x1c004a39; /* addi r10,r10,28			*/ \
+	.long 0xa600607d; /* mfmsr r11				*/ \
+	.long 0x01006b69; /* xori r11,r11,1			*/ \
+	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
+	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
+	.long 0x2400004c  /* rfid				*/
+
 #endif /* _PPC64_PPC_ASM_H */
diff --git a/arch/powerpc/boot/pseries-head.S b/arch/powerpc/boot/pseries-head.S
new file mode 100644
index 0000000..6ef6e02
--- /dev/null
+++ b/arch/powerpc/boot/pseries-head.S
@@ -0,0 +1,8 @@
+#include "ppc_asm.h"
+
+	.text
+
+	.globl _zimage_start
+_zimage_start:
+	FIXUP_ENDIAN
+	b _zimage_start_lib
diff --git a/arch/powerpc/boot/stdio.c b/arch/powerpc/boot/stdio.c
index 5b57800..a701261 100644
--- a/arch/powerpc/boot/stdio.c
+++ b/arch/powerpc/boot/stdio.c
@@ -21,6 +21,18 @@ size_t strnlen(const char * s, size_t count)
 	return sc - s;
 }
 
+#ifdef __powerpc64__
+
+# define do_div(n, base) ({						\
+	unsigned int __base = (base);					\
+	unsigned int __rem;						\
+	__rem = ((unsigned long long)(n)) % __base;			\
+	(n) = ((unsigned long long)(n)) / __base;			\
+	__rem;								\
+})
+
+#else
+
 extern unsigned int __div64_32(unsigned long long *dividend,
 			       unsigned int divisor);
 
@@ -39,6 +51,8 @@ extern unsigned int __div64_32(unsigned long long *dividend,
 	__rem;								\
  })
 
+#endif /* __powerpc64__ */
+
 static int skip_atoi(const char **s)
 {
 	int i, c;
diff --git a/arch/powerpc/boot/swab.h b/arch/powerpc/boot/swab.h
new file mode 100644
index 0000000..d0e1431
--- /dev/null
+++ b/arch/powerpc/boot/swab.h
@@ -0,0 +1,29 @@
+#ifndef _PPC_BOOT_SWAB_H_
+#define _PPC_BOOT_SWAB_H_
+
+static inline u16 swab16(u16 x)
+{
+	return  ((x & (u16)0x00ffU) << 8) |
+		((x & (u16)0xff00U) >> 8);
+}
+
+static inline u32 swab32(u32 x)
+{
+	return  ((x & (u32)0x000000ffUL) << 24) |
+		((x & (u32)0x0000ff00UL) <<  8) |
+		((x & (u32)0x00ff0000UL) >>  8) |
+		((x & (u32)0xff000000UL) >> 24);
+}
+
+static inline u64 swab64(u64 x)
+{
+	return  (u64)((x & (u64)0x00000000000000ffULL) << 56) |
+		(u64)((x & (u64)0x000000000000ff00ULL) << 40) |
+		(u64)((x & (u64)0x0000000000ff0000ULL) << 24) |
+		(u64)((x & (u64)0x00000000ff000000ULL) <<  8) |
+		(u64)((x & (u64)0x000000ff00000000ULL) >>  8) |
+		(u64)((x & (u64)0x0000ff0000000000ULL) >> 24) |
+		(u64)((x & (u64)0x00ff000000000000ULL) >> 40) |
+		(u64)((x & (u64)0xff00000000000000ULL) >> 56);
+}
+#endif /* _PPC_BOOT_SWAB_H_ */
diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c
new file mode 100644
index 0000000..b73174c
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-akebono.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ *    Copyright 2007 David Gibson, IBM Corporation.
+ *    Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *    Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdlib.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+#define USERDATA_LEN	256	/* Length of userdata passed in by PIBS */
+#define MAX_RANKS	0x4
+#define DDR3_MR0CF	0x80010011U
+#define CCTL0_MCO2	0x8000080FU
+#define CCTL0_MCO3	0x80000810U
+#define CCTL0_MCO4	0x80000811U
+#define CCTL0_MCO5	0x80000812U
+#define CCTL0_MCO6	0x80000813U
+
+static unsigned long long ibm_akebono_memsize;
+static long long unsigned mac_addr;
+
+static unsigned long long ibm_akebono_detect_memsize(void)
+{
+	u32 reg;
+	unsigned i;
+	unsigned long long memsize = 0;
+
+	for (i = 0; i < MAX_RANKS; i++) {
+		reg = mfdcrx(DDR3_MR0CF + i);
+
+		if (!(reg & 1))
+			continue;
+
+		reg &= 0x0000f000;
+		reg >>= 12;
+		memsize += (0x800000ULL << reg);
+	}
+
+	return memsize;
+}
+
+static void ibm_akebono_fixups(void)
+{
+	void *emac;
+	u32 reg;
+
+	dt_fixup_memory(0x0ULL,  ibm_akebono_memsize);
+
+	/* Fixup the SD timeout frequency */
+	mtdcrx(CCTL0_MCO4, 0x1);
+
+	/* Disable SD high-speed mode (which seems to be broken) */
+	reg = mfdcrx(CCTL0_MCO2) & ~0x2;
+	mtdcrx(CCTL0_MCO2, reg);
+
+	/* Set the MAC address */
+	emac = finddevice("/plb/opb/ethernet");
+	if (emac > 0) {
+		if (mac_addr)
+			setprop(emac, "local-mac-address",
+				((u8 *) &mac_addr) + 2 , 6);
+	}
+}
+
+void platform_init(char *userdata)
+{
+	unsigned long end_of_ram, avail_ram;
+	u32 pir_reg;
+	int node, size;
+	const u32 *timebase;
+	int len, i, userdata_len;
+	char *end;
+
+	userdata[USERDATA_LEN - 1] = '\0';
+	userdata_len = strlen(userdata);
+	for (i = 0; i < userdata_len - 15; i++) {
+		if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) {
+			if (i > 0 && userdata[i - 1] != ' ') {
+				/* We've only found a substring ending
+				 * with local-mac-addr so this isn't
+				 * our mac address. */
+				continue;
+			}
+
+			mac_addr = strtoull(&userdata[i + 15], &end, 16);
+
+			/* Remove the "local-mac-addr=<...>" from the kernel
+			 * command line, including the tailing space if
+			 * present. */
+			if (*end == ' ')
+				end++;
+
+			len = ((int) end) - ((int) &userdata[i]);
+			memmove(&userdata[i], end,
+				userdata_len - (len + i) + 1);
+			break;
+		}
+	}
+
+	loader_info.cmdline = userdata;
+	loader_info.cmdline_len = 256;
+
+	ibm_akebono_memsize = ibm_akebono_detect_memsize();
+	if (ibm_akebono_memsize >> 32)
+		end_of_ram = ~0UL;
+	else
+		end_of_ram = ibm_akebono_memsize;
+	avail_ram = end_of_ram - (unsigned long)_end;
+
+	simple_alloc_init(_end, avail_ram, 128, 64);
+	platform_ops.fixups = ibm_akebono_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	pir_reg = mfspr(SPRN_PIR);
+
+	/* Make sure FDT blob is sane */
+	if (fdt_check_header(_dtb_start) != 0)
+		fatal("Invalid device tree blob\n");
+
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+					     "cpu", sizeof("cpu"));
+	if (!node)
+		fatal("Cannot find cpu node\n");
+	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+	if (timebase && (size == 4))
+		timebase_period_ns = 1000000000 / *timebase;
+
+	fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+	fdt_init(_dtb_start);
+
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 6636b1d..243b849 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -45,7 +45,7 @@ udelay:
 	mfspr	r4,SPRN_PVR
 	srwi	r4,r4,16
 	cmpwi	0,r4,1		/* 601 ? */
-	bne	.udelay_not_601
+	bne	.Ludelay_not_601
 00:	li	r0,86	/* Instructions / microsecond? */
 	mtctr	r0
 10:	addi	r0,r0,0 /* NOP */
@@ -54,7 +54,7 @@ udelay:
 	bne	00b
 	blr
 
-.udelay_not_601:
+.Ludelay_not_601:
 	mulli	r4,r3,1000	/* nanoseconds */
 	/*  Change r4 to be the number of ticks using:
 	 *	(nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d27a255..ae0f88e 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -40,6 +40,7 @@ cacheit=
 binary=
 gzip=.gz
 pie=
+format=
 
 # cross-compilation prefix
 CROSS=
@@ -136,6 +137,14 @@ if [ -z "$kernel" ]; then
     kernel=vmlinux
 fi
 
+elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
+case "$elfformat" in
+    elf64-powerpcle)	format=elf64lppc	;;
+    elf64-powerpc)	format=elf32ppc	;;
+    elf32-powerpc)	format=elf32ppc	;;
+esac
+
+
 platformo=$object/"$platform".o
 lds=$object/zImage.lds
 ext=strip
@@ -152,8 +161,12 @@ of)
     make_space=n
     ;;
 pseries)
-    platformo="$object/of.o $object/epapr.o"
+    platformo="$object/pseries-head.o $object/of.o $object/epapr.o"
     link_address='0x4000000'
+    if [ "$format" != "elf32ppc" ]; then
+	link_address=
+	pie=-pie
+    fi
     make_space=n
     ;;
 maple)
@@ -257,6 +270,9 @@ gamecube|wii)
 treeboot-currituck)
     link_address='0x1000000'
     ;;
+treeboot-akebono)
+    link_address='0x1000000'
+    ;;
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
@@ -379,7 +395,7 @@ if [ "$platform" != "miboot" ]; then
     if [ -n "$link_address" ] ; then
         text_start="-Ttext $link_address"
     fi
-    ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
+    ${CROSS}ld -m $format -T $lds $text_start $pie -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 2bd8731..861e721 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -1,4 +1,10 @@
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+OUTPUT_ARCH(powerpc:common64)
+#else
 OUTPUT_ARCH(powerpc:common)
+#endif
 ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
@@ -16,7 +22,9 @@ SECTIONS
     *(.rodata*)
     *(.data*)
     *(.sdata*)
+#ifndef CONFIG_PPC64_BOOT_WRAPPER
     *(.got2)
+#endif
   }
   .dynsym : { *(.dynsym) }
   .dynstr : { *(.dynstr) }
@@ -27,7 +35,13 @@ SECTIONS
   }
   .hash : { *(.hash) }
   .interp : { *(.interp) }
-  .rela.dyn : { *(.rela*) }
+  .rela.dyn :
+  {
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+    __rela_dyn_start = .;
+#endif
+    *(.rela*)
+  }
 
   . = ALIGN(8);
   .kernel:dtb :
@@ -53,6 +67,15 @@ SECTIONS
     _initrd_end =  .;
   }
 
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+  .got :
+  {
+    __toc_start = .;
+    *(.got)
+    *(.toc)
+  }
+#endif
+
   . = ALIGN(4096);
   .bss       :
   {
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
new file mode 100644
index 0000000..7e2530c
--- /dev/null
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -0,0 +1,148 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_SLUB_CPU_PARTIAL is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_POWERNV_MSI is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_AKEBONO=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_COMPACTION is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_USB_DEFAULT_PERSIST is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_DEFAULT="n"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/85xx/kmp204x_defconfig b/arch/powerpc/configs/85xx/kmp204x_defconfig
new file mode 100644
index 0000000..e9a81e5
--- /dev/null
+++ b/arch/powerpc/configs/85xx/kmp204x_defconfig
@@ -0,0 +1,225 @@
+CONFIG_PPC_85xx=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_CORENET_GENERIC=y
+CONFIG_MPIC_MSGR=y
+CONFIG_HIGHMEM=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_KEXEC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_LOWMEM_SIZE_BOOL=y
+CONFIG_LOWMEM_SIZE=0x20000000
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
+CONFIG_TIPC=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_MULTIQ=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_CLS_BASIC=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_U32=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_FLOW=y
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=2048
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_PTP_1588_CLOCK=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_UIO=y
+CONFIG_STAGING=y
+# CONFIG_NET_VENDOR_SILICOM is not set
+CONFIG_CLK_PPC_CORENET=y
+CONFIG_EXT2_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_ITU_T=m
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_RCU_TRACE=y
+CONFIG_UPROBE_EVENT=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index bbd794d..c19ff05 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -72,6 +72,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 19f0fbe..55765c8 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
 CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 062312e..5c6ecdc 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
 CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 97e02f9..37991e1 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -42,15 +42,47 @@ void __patch_exception(int exc, unsigned long addr);
 } while (0)
 #endif
 
+#define OP_RT_RA_MASK	0xffff0000UL
+#define LIS_R2		0x3c020000UL
+#define ADDIS_R2_R12	0x3c4c0000UL
+#define ADDI_R2_R2	0x38420000UL
+
 static inline unsigned long ppc_function_entry(void *func)
 {
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+	u32 *insn = func;
+
+	/*
+	 * A PPC64 ABIv2 function may have a local and a global entry
+	 * point. We need to use the local entry point when patching
+	 * functions, so identify and step over the global entry point
+	 * sequence.
+	 *
+	 * The global entry point sequence is always of the form:
+	 *
+	 * addis r2,r12,XXXX
+	 * addi  r2,r2,XXXX
+	 *
+	 * A linker optimisation may convert the addis to lis:
+	 *
+	 * lis   r2,XXXX
+	 * addi  r2,r2,XXXX
+	 */
+	if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) ||
+	     ((*insn & OP_RT_RA_MASK) == LIS_R2)) &&
+	    ((*(insn+1) & OP_RT_RA_MASK) == ADDI_R2_R2))
+		return (unsigned long)(insn + 2);
+	else
+		return (unsigned long)func;
+#else
 	/*
-	 * On PPC64 the function pointer actually points to the function's
-	 * descriptor. The first entry in the descriptor is the address
-	 * of the function text.
+	 * On PPC64 ABIv1 the function pointer actually points to the
+	 * function's descriptor. The first entry in the descriptor is the
+	 * address of the function text.
 	 */
 	return ((func_descr_t *)func)->entry;
+#endif
 #else
 	return (unsigned long)func;
 #endif
diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h
index b6f5a33..4001492 100644
--- a/arch/powerpc/include/asm/context_tracking.h
+++ b/arch/powerpc/include/asm/context_tracking.h
@@ -2,9 +2,9 @@
 #define _ASM_POWERPC_CONTEXT_TRACKING_H
 
 #ifdef CONFIG_CONTEXT_TRACKING
-#define SCHEDULE_USER bl	.schedule_user
+#define SCHEDULE_USER bl	schedule_user
 #else
-#define SCHEDULE_USER bl	.schedule
+#define SCHEDULE_USER bl	schedule
 #endif
 
 #endif
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index ac3eedb..2bf8e93 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -18,10 +18,12 @@
 
 #ifdef CONFIG_SMP
 extern int threads_per_core;
+extern int threads_per_subcore;
 extern int threads_shift;
 extern cpumask_t threads_core_mask;
 #else
 #define threads_per_core	1
+#define threads_per_subcore	1
 #define threads_shift		0
 #define threads_core_mask	(CPU_MASK_CPU0)
 #endif
@@ -74,6 +76,11 @@ static inline int cpu_thread_in_core(int cpu)
 	return cpu & (threads_per_core - 1);
 }
 
+static inline int cpu_thread_in_subcore(int cpu)
+{
+	return cpu & (threads_per_subcore - 1);
+}
+
 static inline int cpu_first_thread_sibling(int cpu)
 {
 	return cpu & ~(threads_per_core - 1);
diff --git a/arch/powerpc/include/asm/debug.h b/arch/powerpc/include/asm/debug.h
index d251630..a954e49 100644
--- a/arch/powerpc/include/asm/debug.h
+++ b/arch/powerpc/include/asm/debug.h
@@ -46,7 +46,8 @@ static inline int debugger_break_match(struct pt_regs *regs) { return 0; }
 static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
-int set_breakpoint(struct arch_hw_breakpoint *brk);
+void set_breakpoint(struct arch_hw_breakpoint *brk);
+void __set_breakpoint(struct arch_hw_breakpoint *brk);
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 extern void do_send_trap(struct pt_regs *regs, unsigned long address,
 			 unsigned long error_code, int signal_code, int brkpt);
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index d4dd41f..b76f58c 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -32,6 +32,22 @@ struct device_node;
 
 #ifdef CONFIG_EEH
 
+/* EEH subsystem flags */
+#define EEH_ENABLED		0x1	/* EEH enabled		*/
+#define EEH_FORCE_DISABLED	0x2	/* EEH disabled		*/
+#define EEH_PROBE_MODE_DEV	0x4	/* From PCI device	*/
+#define EEH_PROBE_MODE_DEVTREE	0x8	/* From device tree	*/
+
+/*
+ * Delay for PE reset, all in ms
+ *
+ * PCI specification has reset hold time of 100 milliseconds.
+ * We have 250 milliseconds here. The PCI bus settlement time
+ * is specified as 1.5 seconds and we have 1.8 seconds.
+ */
+#define EEH_PE_RST_HOLD_TIME		250
+#define EEH_PE_RST_SETTLE_TIME		1800
+
 /*
  * The struct is used to trace PE related EEH functionality.
  * In theory, there will have one instance of the struct to
@@ -53,7 +69,7 @@ struct device_node;
 
 #define EEH_PE_ISOLATED		(1 << 0)	/* Isolated PE		*/
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
-#define EEH_PE_PHB_DEAD		(1 << 2)	/* Dead PHB		*/
+#define EEH_PE_RESET		(1 << 2)	/* PE reset in progress	*/
 
 #define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
 
@@ -92,6 +108,7 @@ struct eeh_pe {
 
 #define EEH_DEV_NO_HANDLER	(1 << 8)	/* No error handler	*/
 #define EEH_DEV_SYSFS		(1 << 9)	/* Sysfs created	*/
+#define EEH_DEV_REMOVED		(1 << 10)	/* Removed permanently	*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -99,7 +116,9 @@ struct eeh_dev {
 	int config_addr;		/* Config address		*/
 	int pe_config_addr;		/* PE config address		*/
 	u32 config_space[16];		/* Saved PCI config space	*/
-	u8 pcie_cap;			/* Saved PCIe capability	*/
+	int pcix_cap;			/* Saved PCIx capability	*/
+	int pcie_cap;			/* Saved PCIe capability	*/
+	int aer_cap;			/* Saved AER capability		*/
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
@@ -171,37 +190,40 @@ struct eeh_ops {
 	int (*restore_config)(struct device_node *dn);
 };
 
+extern int eeh_subsystem_flags;
 extern struct eeh_ops *eeh_ops;
-extern bool eeh_subsystem_enabled;
 extern raw_spinlock_t confirm_error_lock;
-extern int eeh_probe_mode;
 
 static inline bool eeh_enabled(void)
 {
-	return eeh_subsystem_enabled;
+	if ((eeh_subsystem_flags & EEH_FORCE_DISABLED) ||
+	    !(eeh_subsystem_flags & EEH_ENABLED))
+		return false;
+
+	return true;
 }
 
 static inline void eeh_set_enable(bool mode)
 {
-	eeh_subsystem_enabled = mode;
+	if (mode)
+		eeh_subsystem_flags |= EEH_ENABLED;
+	else
+		eeh_subsystem_flags &= ~EEH_ENABLED;
 }
 
-#define EEH_PROBE_MODE_DEV	(1<<0)	/* From PCI device	*/
-#define EEH_PROBE_MODE_DEVTREE	(1<<1)	/* From device tree	*/
-
 static inline void eeh_probe_mode_set(int flag)
 {
-	eeh_probe_mode = flag;
+	eeh_subsystem_flags |= flag;
 }
 
 static inline int eeh_probe_mode_devtree(void)
 {
-	return (eeh_probe_mode == EEH_PROBE_MODE_DEVTREE);
+	return (eeh_subsystem_flags & EEH_PROBE_MODE_DEVTREE);
 }
 
 static inline int eeh_probe_mode_dev(void)
 {
-	return (eeh_probe_mode == EEH_PROBE_MODE_DEV);
+	return (eeh_subsystem_flags & EEH_PROBE_MODE_DEV);
 }
 
 static inline void eeh_serialize_lock(unsigned long *flags)
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 935b5e7..888d8f3 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -90,6 +90,8 @@ typedef elf_vrregset_t elf_fpxregset_t;
 do {								\
 	if (((ex).e_flags & 0x3) == 2)				\
 		set_thread_flag(TIF_ELF2ABI);			\
+	else							\
+		clear_thread_flag(TIF_ELF2ABI);			\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
 		set_thread_flag(TIF_32BIT);			\
 	else							\
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index a563d9af..a8b52b6 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -174,10 +174,10 @@ exc_##label##_book3e:
 	mtlr	r16;
 #define TLB_MISS_STATS_D(name)						    \
 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
-	bl	.tlb_stat_inc;
+	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_I(name)						    \
 	addi	r9,r13,MMSTAT_ISTATS+name;				    \
-	bl	.tlb_stat_inc;
+	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_X(name)						    \
 	ld	r8,PACA_EXTLB+EX_TLB_ESR(r13);				    \
 	cmpdi	cr2,r8,-1;						    \
@@ -185,7 +185,7 @@ exc_##label##_book3e:
 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
 	b	62f;							    \
 61:	addi	r9,r13,MMSTAT_ISTATS+name;				    \
-62:	bl	.tlb_stat_inc;
+62:	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_SAVE_INFO					    \
 	std	r14,EX_TLB_ESR(r12);	/* save ESR */
 #define TLB_MISS_STATS_SAVE_INFO_BOLTED					    \
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index aeaa56c..8f35cd7 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -517,7 +517,7 @@ label##_relon_hv:							\
 #define DISABLE_INTS	RECONCILE_IRQ_STATE(r10,r11)
 
 #define ADD_NVGPRS				\
-	bl	.save_nvgprs
+	bl	save_nvgprs
 
 #define RUNLATCH_ON				\
 BEGIN_FTR_SECTION				\
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 169d039..e366187 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -61,6 +61,7 @@ struct dyn_arch_ftrace {
 #endif
 
 #if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__)
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
 #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
 static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
 {
@@ -72,6 +73,7 @@ static inline bool arch_syscall_match_sym_name(const char *sym, const char *name
 	 */
 	return !strcmp(sym + 4, name + 3);
 }
+#endif
 #endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index eb0f4ac..ac6432d 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -79,7 +79,7 @@ static inline void hw_breakpoint_disable(void)
 	brk.address = 0;
 	brk.type = 0;
 	brk.len = 0;
-	set_breakpoint(&brk);
+	__set_breakpoint(&brk);
 }
 extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs);
 
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index f51a558..e20eb95 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -20,9 +20,9 @@
  */
 #define TRACE_WITH_FRAME_BUFFER(func)		\
 	mflr	r0;				\
-	stdu	r1, -32(r1);			\
+	stdu	r1, -STACK_FRAME_OVERHEAD(r1);	\
 	std	r0, 16(r1);			\
-	stdu	r1, -32(r1);			\
+	stdu	r1, -STACK_FRAME_OVERHEAD(r1);	\
 	bl func;				\
 	ld	r1, 0(r1);			\
 	ld	r1, 0(r1);
@@ -36,8 +36,8 @@
  * have to call a C function so call a wrapper that saves all the
  * C-clobbered registers.
  */
-#define TRACE_ENABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
-#define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
+#define TRACE_ENABLE_INTS	TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on)
+#define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off)
 
 /*
  * This is used by assembly code to soft-disable interrupts first and
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index 7b6feab..af15d4d 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -30,6 +30,7 @@
 #include <linux/ptrace.h>
 #include <linux/percpu.h>
 #include <asm/probes.h>
+#include <asm/code-patching.h>
 
 #define  __ARCH_WANT_KPROBES_INSN_SLOT
 
@@ -56,9 +57,9 @@ typedef ppc_opcode_t kprobe_opcode_t;
 		if ((colon = strchr(name, ':')) != NULL) {		\
 			colon++;					\
 			if (*colon != '\0' && *colon != '.')		\
-				addr = *(kprobe_opcode_t **)addr;	\
+				addr = (kprobe_opcode_t *)ppc_function_entry(addr); \
 		} else if (name[0] != '.')				\
-			addr = *(kprobe_opcode_t **)addr;		\
+			addr = (kprobe_opcode_t *)ppc_function_entry(addr); \
 	} else {							\
 		char dot_name[KSYM_NAME_LEN];				\
 		dot_name[0] = '.';					\
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 4a7cc45..9c89cdd 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -337,6 +337,10 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
 	vcpu->kvm->arch.kvm_ops->fast_vcpu_kick(vcpu);
 }
 
+extern void kvm_hv_vm_activated(void);
+extern void kvm_hv_vm_deactivated(void);
+extern bool kvm_hv_mode_active(void);
+
 #else
 static inline void __init kvm_cma_reserve(void)
 {}
@@ -356,6 +360,9 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
 {
 	kvm_vcpu_kick(vcpu);
 }
+
+static inline bool kvm_hv_mode_active(void)		{ return false; }
+
 #endif
 
 #ifdef CONFIG_KVM_XICS
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
index b36f650..e3ad5c7 100644
--- a/arch/powerpc/include/asm/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
@@ -2,6 +2,7 @@
 #define _ASM_POWERPC_LINKAGE_H
 
 #ifdef CONFIG_PPC64
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
 #define cond_syscall(x) \
 	asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n"		\
 	     "\t.weak ." #x "\n\t.set ." #x ", .sys_ni_syscall\n")
@@ -9,5 +10,6 @@
 	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
 	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
 #endif
+#endif
 
 #endif	/* _ASM_POWERPC_LINKAGE_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 5b6c03f..f92b0b5 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -98,6 +98,9 @@ struct machdep_calls {
 	void		(*iommu_save)(void);
 	void		(*iommu_restore)(void);
 #endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+	unsigned long	(*memory_block_size)(void);
+#endif
 #endif /* CONFIG_PPC64 */
 
 	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
@@ -113,6 +116,8 @@ struct machdep_calls {
 	/* Optional, may be NULL. */
 	void		(*show_cpuinfo)(struct seq_file *m);
 	void		(*show_percpuinfo)(struct seq_file *m, int i);
+	/* Returns the current operating frequency of "cpu" in Hz */
+	unsigned long  	(*get_proc_freq)(unsigned int cpu);
 
 	void		(*init_IRQ)(void);
 
@@ -241,6 +246,9 @@ struct machdep_calls {
 	/* Called during PCI resource reassignment */
 	resource_size_t (*pcibios_window_alignment)(struct pci_bus *, unsigned long type);
 
+	/* Reset the secondary bus of bridge */
+	void  (*pcibios_reset_secondary_bus)(struct pci_dev *dev);
+
 	/* Called to shutdown machine specific hardware not already controlled
 	 * by other drivers.
 	 */
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index 49fa55b..dcfcad1 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -35,6 +35,7 @@ struct mod_arch_specific {
 #ifdef __powerpc64__
 	unsigned int stubs_section;	/* Index of stubs section in module */
 	unsigned int toc_section;	/* What section is the TOC? */
+	bool toc_fixed;			/* Have we fixed up .TOC.? */
 #ifdef CONFIG_DYNAMIC_FTRACE
 	unsigned long toc;
 	unsigned long tramp;
@@ -77,6 +78,9 @@ struct mod_arch_specific {
 #    endif	/* MODULE */
 #endif
 
+bool is_module_trampoline(u32 *insns);
+int module_trampoline_target(struct module *mod, u32 *trampoline,
+			     unsigned long *target);
 
 struct exception_table_entry;
 void sort_ex_table(struct exception_table_entry *start,
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 66ad7a7..cb15cbb 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -154,6 +154,7 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_LPC_READ				67
 #define OPAL_LPC_WRITE				68
 #define OPAL_RETURN_CPU				69
+#define OPAL_REINIT_CPUS			70
 #define OPAL_ELOG_READ				71
 #define OPAL_ELOG_WRITE				72
 #define OPAL_ELOG_ACK				73
@@ -509,7 +510,7 @@ enum OpalMemErr_DynErrType {
 struct OpalMemoryErrorData {
 	enum OpalMemErr_Version	version:8;	/* 0x00 */
 	enum OpalMemErrType	type:8;		/* 0x01 */
-	uint16_t		flags;		/* 0x02 */
+	__be16			flags;		/* 0x02 */
 	uint8_t			reserved_1[4];	/* 0x04 */
 
 	union {
@@ -517,15 +518,15 @@ struct OpalMemoryErrorData {
 		struct {
 			enum OpalMemErr_ResilErrType resil_err_type:8;
 			uint8_t		reserved_1[7];
-			uint64_t	physical_address_start;
-			uint64_t	physical_address_end;
+			__be64		physical_address_start;
+			__be64		physical_address_end;
 		} resilience;
 		/* Dynamic memory deallocation error info */
 		struct {
 			enum OpalMemErr_DynErrType dyn_err_type:8;
 			uint8_t		reserved_1[7];
-			uint64_t	physical_address_start;
-			uint64_t	physical_address_end;
+			__be64		physical_address_start;
+			__be64		physical_address_end;
 		} dyn_dealloc;
 	} u;
 };
@@ -725,6 +726,11 @@ struct OpalIoPhb3ErrorData {
 	uint64_t pestB[OPAL_PHB3_NUM_PEST_REGS];
 };
 
+enum {
+	OPAL_REINIT_CPUS_HILE_BE	= (1 << 0),
+	OPAL_REINIT_CPUS_HILE_LE	= (1 << 1),
+};
+
 typedef struct oppanel_line {
 	const char * 	line;
 	uint64_t 	line_len;
@@ -849,6 +855,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 			    uint16_t *pci_error_type, uint16_t *severity);
 int64_t opal_pci_poll(uint64_t phb_id);
 int64_t opal_return_cpu(void);
+int64_t opal_reinit_cpus(uint64_t flags);
 
 int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val);
 int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val);
@@ -916,6 +923,7 @@ extern void opal_get_rtc_time(struct rtc_time *tm);
 extern unsigned long opal_get_boot_time(void);
 extern void opal_nvram_init(void);
 extern void opal_flash_init(void);
+extern void opal_flash_term_callback(void);
 extern int opal_elog_init(void);
 extern void opal_platform_dump_init(void);
 extern void opal_sys_param_init(void);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 8e956a0..bb0bd25 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -92,7 +92,10 @@ struct paca_struct {
 	struct slb_shadow *slb_shadow_ptr;
 	struct dtl_entry *dispatch_log;
 	struct dtl_entry *dispatch_log_end;
+#endif /* CONFIG_PPC_STD_MMU_64 */
+	u64 dscr_default;		/* per-CPU default DSCR */
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	/*
 	 * Now, starting in cacheline 2, the exception save areas
 	 */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index ed57fa7..db1e2b8 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -58,6 +58,7 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
 int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
 void eeh_pe_state_mark(struct eeh_pe *pe, int state);
 void eeh_pe_state_clear(struct eeh_pe *pe, int state);
+void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
 
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index cded7c1..9ea266e 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -57,7 +57,7 @@ BEGIN_FW_FTR_SECTION;							\
 	LDX_BE	r10,0,r10;		/* get log write index */	\
 	cmpd	cr1,r11,r10;						\
 	beq+	cr1,33f;						\
-	bl	.accumulate_stolen_time;				\
+	bl	accumulate_stolen_time;				\
 	ld	r12,_MSR(r1);						\
 	andi.	r10,r12,MSR_PR;		/* Restore cr0 (coming from user) */ \
 33:									\
@@ -189,57 +189,53 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define __STK_REG(i)   (112 + ((i)-14)*8)
 #define STK_REG(i)     __STK_REG(__REG_##i)
 
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define STK_GOT		24
+#define __STK_PARAM(i)	(32 + ((i)-3)*8)
+#else
+#define STK_GOT		40
 #define __STK_PARAM(i)	(48 + ((i)-3)*8)
+#endif
 #define STK_PARAM(i)	__STK_PARAM(__REG_##i)
 
-#define XGLUE(a,b) a##b
-#define GLUE(a,b) XGLUE(a,b)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
 
 #define _GLOBAL(name) \
 	.section ".text"; \
 	.align 2 ; \
+	.type name,@function; \
 	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
+name:
 
-#define _INIT_GLOBAL(name) \
-	__REF; \
+#define _GLOBAL_TOC(name) \
+	.section ".text"; \
 	.align 2 ; \
+	.type name,@function; \
 	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
 name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
+0:	addis r2,r12,(.TOC.-0b)@ha; \
+	addi r2,r2,(.TOC.-0b)@l; \
+	.localentry name,.-name
 
 #define _KPROBE(name) \
 	.section ".kprobes.text","a"; \
 	.align 2 ; \
+	.type name,@function; \
 	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
+name:
+
+#define DOTSYM(a)	a
+
+#else
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
 
-#define _STATIC(name) \
+#define _GLOBAL(name) \
 	.section ".text"; \
 	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
 	.section ".opd","aw"; \
 name: \
 	.quad GLUE(.,name); \
@@ -249,9 +245,13 @@ name: \
 	.type GLUE(.,name),@function; \
 GLUE(.,name):
 
-#define _INIT_STATIC(name) \
-	__REF; \
+#define _GLOBAL_TOC(name) _GLOBAL(name)
+
+#define _KPROBE(name) \
+	.section ".kprobes.text","a"; \
 	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
 	.section ".opd","aw"; \
 name: \
 	.quad GLUE(.,name); \
@@ -261,6 +261,10 @@ name: \
 	.type GLUE(.,name),@function; \
 GLUE(.,name):
 
+#define DOTSYM(a)	GLUE(.,a)
+
+#endif
+
 #else /* 32-bit */
 
 #define _ENTRY(n)	\
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d660dc3..6d59072 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -449,7 +449,7 @@ extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
-extern void power7_nap(void);
+extern void power7_nap(int check_irq);
 extern void power7_sleep(void);
 extern void flush_instruction_cache(void);
 extern void hard_reset_now(void);
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 4852bcf..bffd89d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -215,6 +215,7 @@
 #define SPRN_TEXASR	0x82	/* Transaction EXception & Summary */
 #define   TEXASR_FS	__MASK(63-36)	/* Transaction Failure Summary */
 #define SPRN_TEXASRU	0x83	/* ''	   ''	   ''	 Upper 32  */
+#define   TEXASR_FS     __MASK(63-36) /* TEXASR Failure Summary */
 #define SPRN_TFHAR	0x80	/* Transaction Failure Handler Addr */
 #define SPRN_CTRLF	0x088
 #define SPRN_CTRLT	0x098
@@ -224,6 +225,7 @@
 #define   CTRL_TE	0x00c00000	/* thread enable */
 #define   CTRL_RUNLATCH	0x1
 #define SPRN_DAWR	0xB4
+#define SPRN_RPR	0xBA	/* Relative Priority Register */
 #define SPRN_CIABR	0xBB
 #define   CIABR_PRIV		0x3
 #define   CIABR_PRIV_USER	1
@@ -272,8 +274,10 @@
 #define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
 #define SPRN_IC		0x350	/* Virtual Instruction Count */
 #define SPRN_VTB	0x351	/* Virtual Time Base */
+#define SPRN_LDBAR	0x352	/* LD Base Address Register */
 #define SPRN_PMICR	0x354   /* Power Management Idle Control Reg */
 #define SPRN_PMSR	0x355   /* Power Management Status Reg */
+#define SPRN_PMMAR	0x356	/* Power Management Memory Activity Register */
 #define SPRN_PMCR	0x374	/* Power Management Control Register */
 
 /* HFSCR and FSCR bit numbers are the same */
@@ -433,6 +437,12 @@
 #define HID0_BTCD	(1<<1)		/* Branch target cache disable */
 #define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
 #define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
+/* POWER8 HID0 bits */
+#define HID0_POWER8_4LPARMODE	__MASK(61)
+#define HID0_POWER8_2LPARMODE	__MASK(57)
+#define HID0_POWER8_1TO2LPAR	__MASK(52)
+#define HID0_POWER8_1TO4LPAR	__MASK(51)
+#define HID0_POWER8_DYNLPARDIS	__MASK(48)
 
 #define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
 #ifdef CONFIG_6xx
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 5217903..a5e930a 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -50,6 +50,7 @@ static inline int overlaps_kvm_tmp(unsigned long start, unsigned long end)
 #endif
 }
 
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
 #undef dereference_function_descriptor
 static inline void *dereference_function_descriptor(void *ptr)
 {
@@ -60,6 +61,7 @@ static inline void *dereference_function_descriptor(void *ptr)
 		ptr = p;
 	return ptr;
 }
+#endif
 
 #endif
 
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ff51046..5a6614a 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -68,14 +68,6 @@ void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
 void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
-
-extern void inhibit_secondary_onlining(void);
-extern void uninhibit_secondary_onlining(void);
-
-#else /* HOTPLUG_CPU */
-static inline void inhibit_secondary_onlining(void) {}
-static inline void uninhibit_secondary_onlining(void) {}
-
 #endif
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
index 0dffad6..e40010a 100644
--- a/arch/powerpc/include/asm/string.h
+++ b/arch/powerpc/include/asm/string.h
@@ -10,9 +10,7 @@
 #define __HAVE_ARCH_STRNCMP
 #define __HAVE_ARCH_STRCAT
 #define __HAVE_ARCH_MEMSET
-#ifdef __BIG_ENDIAN__
 #define __HAVE_ARCH_MEMCPY
-#endif
 #define __HAVE_ARCH_MEMMOVE
 #define __HAVE_ARCH_MEMCMP
 #define __HAVE_ARCH_MEMCHR
@@ -24,9 +22,7 @@ extern int strcmp(const char *,const char *);
 extern int strncmp(const char *, const char *, __kernel_size_t);
 extern char * strcat(char *, const char *);
 extern void * memset(void *,int,__kernel_size_t);
-#ifdef __BIG_ENDIAN__
 extern void * memcpy(void *,const void *,__kernel_size_t);
-#endif
 extern void * memmove(void *,const void *,__kernel_size_t);
 extern int memcmp(const void *,const void *,__kernel_size_t);
 extern void * memchr(const void *,int,__kernel_size_t);
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index ea4dc3a..babbeca 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -62,7 +62,7 @@ COMPAT_SYS_SPU(fcntl)
 SYSCALL(ni_syscall)
 SYSCALL_SPU(setpgid)
 SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+SYSX(sys_ni_syscall,sys_olduname,sys_olduname)
 SYSCALL_SPU(umask)
 SYSCALL_SPU(chroot)
 COMPAT_SYS(ustat)
@@ -190,7 +190,7 @@ SYSCALL_SPU(getcwd)
 SYSCALL_SPU(capget)
 SYSCALL_SPU(capset)
 COMPAT_SYS(sigaltstack)
-COMPAT_SYS_SPU(sendfile)
+SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 PPC_SYS(vfork)
@@ -258,7 +258,7 @@ SYSCALL_SPU(tgkill)
 COMPAT_SYS_SPU(utimes)
 COMPAT_SYS_SPU(statfs64)
 COMPAT_SYS_SPU(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+SYSX(sys_ni_syscall,ppc_fadvise64_64,ppc_fadvise64_64)
 PPC_SYS_SPU(rtas)
 OLDSYS(debug_setcontext)
 SYSCALL(ni_syscall)
@@ -295,7 +295,7 @@ SYSCALL_SPU(mkdirat)
 SYSCALL_SPU(mknodat)
 SYSCALL_SPU(fchownat)
 COMPAT_SYS_SPU(futimesat)
-SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSX_SPU(sys_newfstatat,sys_fstatat64,sys_fstatat64)
 SYSCALL_SPU(unlinkat)
 SYSCALL_SPU(renameat)
 SYSCALL_SPU(linkat)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 6c8a8c5..5f1048e 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -16,19 +16,6 @@ struct device_node;
 
 #include <asm/mmzone.h>
 
-static inline int cpu_to_node(int cpu)
-{
-	int nid;
-
-	nid = numa_cpu_lookup_table[cpu];
-
-	/*
-	 * During early boot, the numa-cpu lookup table might not have been
-	 * setup for all CPUs yet. In such cases, default to node 0.
-	 */
-	return (nid < 0) ? 0 : nid;
-}
-
 #define parent_node(node)	(node)
 
 #define cpumask_of_node(node) ((node) == -1 ?				\
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index 48be855..7a3f795 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -15,7 +15,6 @@ header-y += ioctls.h
 header-y += ipcbuf.h
 header-y += kvm.h
 header-y += kvm_para.h
-header-y += linkage.h
 header-y += mman.h
 header-y += msgbuf.h
 header-y += nvram.h
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
index 7e39c91..59dad11 100644
--- a/arch/powerpc/include/uapi/asm/elf.h
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -291,9 +291,17 @@ do {									\
 #define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
 #define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
 #define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+#define R_PPC64_TLSGD		107
+#define R_PPC64_TLSLD		108
+#define R_PPC64_TOCSAVE		109
+
+#define R_PPC64_REL16		249
+#define R_PPC64_REL16_LO	250
+#define R_PPC64_REL16_HI	251
+#define R_PPC64_REL16_HA	252
 
 /* Keep this the last entry.  */
-#define R_PPC64_NUM		107
+#define R_PPC64_NUM		253
 
 /* There's actually a third entry here, but it's unused */
 struct ppc64_opd_entry
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 93e1465..f5995a9 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -248,6 +248,7 @@ int main(void)
 #endif
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
 	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
+	DEFINE(PACA_DSCR, offsetof(struct paca_struct, dscr_default));
 	DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime));
 	DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user));
 	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index cc2d896..4f1393d 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -94,12 +94,12 @@ _GLOBAL(setup_altivec_idle)
 _GLOBAL(__setup_cpu_e6500)
 	mflr	r6
 #ifdef CONFIG_PPC64
-	bl	.setup_altivec_ivors
+	bl	setup_altivec_ivors
 	/* Touch IVOR42 only if the CPU supports E.HV category */
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_lrat_ivor
+	bl	setup_lrat_ivor
 1:
 #endif
 	bl	setup_pw20_idle
@@ -164,15 +164,15 @@ _GLOBAL(__setup_cpu_e5500)
 #ifdef CONFIG_PPC_BOOK3E_64
 _GLOBAL(__restore_cpu_e6500)
 	mflr	r5
-	bl	.setup_altivec_ivors
+	bl	setup_altivec_ivors
 	/* Touch IVOR42 only if the CPU supports E.HV category */
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_lrat_ivor
+	bl	setup_lrat_ivor
 1:
-	bl	.setup_pw20_idle
-	bl	.setup_altivec_idle
+	bl	setup_pw20_idle
+	bl	setup_altivec_idle
 	bl	__restore_cpu_e5500
 	mtlr	r5
 	blr
@@ -181,9 +181,9 @@ _GLOBAL(__restore_cpu_e5500)
 	mflr	r4
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
-	bl	.__setup_base_ivors
-	bl	.setup_perfmon_ivor
-	bl	.setup_doorbell_ivors
+	bl	__setup_base_ivors
+	bl	setup_perfmon_ivor
+	bl	setup_doorbell_ivors
 	/*
 	 * We only want to touch IVOR38-41 if we're running on hardware
 	 * that supports category E.HV.  The architectural way to determine
@@ -192,7 +192,7 @@ _GLOBAL(__restore_cpu_e5500)
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_ehv_ivors
+	bl	setup_ehv_ivors
 1:
 	mtlr	r4
 	blr
@@ -201,9 +201,9 @@ _GLOBAL(__setup_cpu_e5500)
 	mflr	r5
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
-	bl	.__setup_base_ivors
-	bl	.setup_perfmon_ivor
-	bl	.setup_doorbell_ivors
+	bl	__setup_base_ivors
+	bl	setup_perfmon_ivor
+	bl	setup_doorbell_ivors
 	/*
 	 * We only want to touch IVOR38-41 if we're running on hardware
 	 * that supports category E.HV.  The architectural way to determine
@@ -212,7 +212,7 @@ _GLOBAL(__setup_cpu_e5500)
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_ehv_ivors
+	bl	setup_ehv_ivors
 	b	2f
 1:
 	ld	r10,CPU_SPEC_FEATURES(r4)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index e7b76a6..7051ea3 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/debugfs.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -35,6 +36,7 @@
 #include <linux/of.h>
 
 #include <linux/atomic.h>
+#include <asm/debug.h>
 #include <asm/eeh.h>
 #include <asm/eeh_event.h>
 #include <asm/io.h>
@@ -87,22 +89,21 @@
 /* Time to wait for a PCI slot to report status, in milliseconds */
 #define PCI_BUS_RESET_WAIT_MSEC (5*60*1000)
 
-/* Platform dependent EEH operations */
-struct eeh_ops *eeh_ops = NULL;
-
-bool eeh_subsystem_enabled = false;
-EXPORT_SYMBOL(eeh_subsystem_enabled);
-
 /*
- * EEH probe mode support. The intention is to support multiple
- * platforms for EEH. Some platforms like pSeries do PCI emunation
- * based on device tree. However, other platforms like powernv probe
- * PCI devices from hardware. The flag is used to distinguish that.
- * In addition, struct eeh_ops::probe would be invoked for particular
- * OF node or PCI device so that the corresponding PE would be created
- * there.
+ * EEH probe mode support, which is part of the flags,
+ * is to support multiple platforms for EEH. Some platforms
+ * like pSeries do PCI emunation based on device tree.
+ * However, other platforms like powernv probe PCI devices
+ * from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for
+ * particular OF node or PCI device so that the corresponding
+ * PE would be created there.
  */
-int eeh_probe_mode;
+int eeh_subsystem_flags;
+EXPORT_SYMBOL(eeh_subsystem_flags);
+
+/* Platform dependent EEH operations */
+struct eeh_ops *eeh_ops = NULL;
 
 /* Lock to avoid races due to multiple reports of an error */
 DEFINE_RAW_SPINLOCK(confirm_error_lock);
@@ -133,6 +134,15 @@ static struct eeh_stats eeh_stats;
 
 #define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
 
+static int __init eeh_setup(char *str)
+{
+	if (!strcmp(str, "off"))
+		eeh_subsystem_flags |= EEH_FORCE_DISABLED;
+
+	return 1;
+}
+__setup("eeh=", eeh_setup);
+
 /**
  * eeh_gather_pci_data - Copy assorted PCI config space registers to buff
  * @edev: device to report data for
@@ -145,73 +155,67 @@ static struct eeh_stats eeh_stats;
 static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
 {
 	struct device_node *dn = eeh_dev_to_of_node(edev);
-	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	u32 cfg;
 	int cap, i;
 	int n = 0;
 
 	n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
-	printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
+	pr_warn("EEH: of node=%s\n", dn->full_name);
 
 	eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
 	n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
-	printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
+	pr_warn("EEH: PCI device/vendor: %08x\n", cfg);
 
 	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
 	n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
-	printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
-
-	if (!dev) {
-		printk(KERN_WARNING "EEH: no PCI device for this of node\n");
-		return n;
-	}
+	pr_warn("EEH: PCI cmd/status register: %08x\n", cfg);
 
 	/* Gather bridge-specific registers */
-	if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
+	if (edev->mode & EEH_DEV_BRIDGE) {
 		eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
 		n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
-		printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
+		pr_warn("EEH: Bridge secondary status: %04x\n", cfg);
 
 		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
 		n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
-		printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
+		pr_warn("EEH: Bridge control: %04x\n", cfg);
 	}
 
 	/* Dump out the PCI-X command and status regs */
-	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	cap = edev->pcix_cap;
 	if (cap) {
 		eeh_ops->read_config(dn, cap, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
-		printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
+		pr_warn("EEH: PCI-X cmd: %08x\n", cfg);
 
 		eeh_ops->read_config(dn, cap+4, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
-		printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
+		pr_warn("EEH: PCI-X status: %08x\n", cfg);
 	}
 
-	/* If PCI-E capable, dump PCI-E cap 10, and the AER */
-	if (pci_is_pcie(dev)) {
+	/* If PCI-E capable, dump PCI-E cap 10 */
+	cap = edev->pcie_cap;
+	if (cap) {
 		n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
-		printk(KERN_WARNING
-		       "EEH: PCI-E capabilities and status follow:\n");
+		pr_warn("EEH: PCI-E capabilities and status follow:\n");
 
 		for (i=0; i<=8; i++) {
-			eeh_ops->read_config(dn, dev->pcie_cap+4*i, 4, &cfg);
+			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
 			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
-			printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
+			pr_warn("EEH: PCI-E %02x: %08x\n", i, cfg);
 		}
+	}
 
-		cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-		if (cap) {
-			n += scnprintf(buf+n, len-n, "pci-e AER:\n");
-			printk(KERN_WARNING
-			       "EEH: PCI-E AER capability register set follows:\n");
-
-			for (i=0; i<14; i++) {
-				eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
-				n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
-				printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
-			}
+	/* If AER capable, dump it */
+	cap = edev->aer_cap;
+	if (cap) {
+		n += scnprintf(buf+n, len-n, "pci-e AER:\n");
+		pr_warn("EEH: PCI-E AER capability register set follows:\n");
+
+		for (i=0; i<14; i++) {
+			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+			pr_warn("EEH: PCI-E AER %02x: %08x\n", i, cfg);
 		}
 	}
 
@@ -232,21 +236,19 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 {
 	size_t loglen = 0;
 	struct eeh_dev *edev, *tmp;
-	bool valid_cfg_log = true;
 
 	/*
 	 * When the PHB is fenced or dead, it's pointless to collect
 	 * the data from PCI config space because it should return
 	 * 0xFF's. For ER, we still retrieve the data from the PCI
 	 * config space.
+	 *
+	 * For pHyp, we have to enable IO for log retrieval. Otherwise,
+	 * 0xFF's is always returned from PCI config space.
 	 */
-	if (eeh_probe_mode_dev() &&
-	    (pe->type & EEH_PE_PHB) &&
-	    (pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)))
-		valid_cfg_log = false;
-
-	if (valid_cfg_log) {
-		eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+	if (!(pe->type & EEH_PE_PHB)) {
+		if (eeh_probe_mode_devtree())
+			eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
 		eeh_ops->configure_bridge(pe);
 		eeh_pe_restore_bars(pe);
 
@@ -309,7 +311,7 @@ static int eeh_phb_check_failure(struct eeh_pe *pe)
 
 	/* If the PHB has been in problematic state */
 	eeh_serialize_lock(&flags);
-	if (phb_pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)) {
+	if (phb_pe->state & EEH_PE_ISOLATED) {
 		ret = 0;
 		goto out;
 	}
@@ -515,16 +517,42 @@ EXPORT_SYMBOL(eeh_check_failure);
  */
 int eeh_pci_enable(struct eeh_pe *pe, int function)
 {
-	int rc;
+	int rc, flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+
+	/*
+	 * pHyp doesn't allow to enable IO or DMA on unfrozen PE.
+	 * Also, it's pointless to enable them on unfrozen PE. So
+	 * we have the check here.
+	 */
+	if (function == EEH_OPT_THAW_MMIO ||
+	    function == EEH_OPT_THAW_DMA) {
+		rc = eeh_ops->get_state(pe, NULL);
+		if (rc < 0)
+			return rc;
+
+		/* Needn't to enable or already enabled */
+		if ((rc == EEH_STATE_NOT_SUPPORT) ||
+		    ((rc & flags) == flags))
+			return 0;
+	}
 
 	rc = eeh_ops->set_option(pe, function);
 	if (rc)
-		pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
-			__func__, function, pe->phb->global_number, pe->addr, rc);
+		pr_warn("%s: Unexpected state change %d on "
+			"PHB#%d-PE#%x, err=%d\n",
+			__func__, function, pe->phb->global_number,
+			pe->addr, rc);
 
 	rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
-	if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
-	   (function == EEH_OPT_THAW_MMIO))
+	if (rc <= 0)
+		return rc;
+
+	if ((function == EEH_OPT_THAW_MMIO) &&
+	    (rc & EEH_STATE_MMIO_ENABLED))
+		return 0;
+
+	if ((function == EEH_OPT_THAW_DMA) &&
+	    (rc & EEH_STATE_DMA_ENABLED))
 		return 0;
 
 	return rc;
@@ -612,26 +640,7 @@ static void eeh_reset_pe_once(struct eeh_pe *pe)
 	else
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 
-	/* The PCI bus requires that the reset be held high for at least
-	 * a 100 milliseconds. We wait a bit longer 'just in case'.
-	 */
-#define PCI_BUS_RST_HOLD_TIME_MSEC 250
-	msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
-
-	/* We might get hit with another EEH freeze as soon as the
-	 * pci slot reset line is dropped. Make sure we don't miss
-	 * these, and clear the flag now.
-	 */
-	eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
-
 	eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
-
-	/* After a PCI slot has been reset, the PCI Express spec requires
-	 * a 1.5 second idle time for the bus to stabilize, before starting
-	 * up traffic.
-	 */
-#define PCI_BUS_SETTLE_TIME_MSEC 1800
-	msleep(PCI_BUS_SETTLE_TIME_MSEC);
 }
 
 /**
@@ -651,6 +660,10 @@ int eeh_reset_pe(struct eeh_pe *pe)
 	for (i=0; i<3; i++) {
 		eeh_reset_pe_once(pe);
 
+		/*
+		 * EEH_PE_ISOLATED is expected to be removed after
+		 * BAR restore.
+		 */
 		rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
 		if ((rc & flags) == flags)
 			return 0;
@@ -826,8 +839,8 @@ int eeh_init(void)
 			&hose_list, list_node)
 			pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
 	} else {
-		pr_warning("%s: Invalid probe mode %d\n",
-			   __func__, eeh_probe_mode);
+		pr_warn("%s: Invalid probe mode %x",
+			__func__, eeh_subsystem_flags);
 		return -EINVAL;
 	}
 
@@ -1102,10 +1115,45 @@ static const struct file_operations proc_eeh_operations = {
 	.release   = single_release,
 };
 
+#ifdef CONFIG_DEBUG_FS
+static int eeh_enable_dbgfs_set(void *data, u64 val)
+{
+	if (val)
+		eeh_subsystem_flags &= ~EEH_FORCE_DISABLED;
+	else
+		eeh_subsystem_flags |= EEH_FORCE_DISABLED;
+
+	/* Notify the backend */
+	if (eeh_ops->post_init)
+		eeh_ops->post_init();
+
+	return 0;
+}
+
+static int eeh_enable_dbgfs_get(void *data, u64 *val)
+{
+	if (eeh_enabled())
+		*val = 0x1ul;
+	else
+		*val = 0x0ul;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(eeh_enable_dbgfs_ops, eeh_enable_dbgfs_get,
+			eeh_enable_dbgfs_set, "0x%llx\n");
+#endif
+
 static int __init eeh_init_proc(void)
 {
-	if (machine_is(pseries) || machine_is(powernv))
+	if (machine_is(pseries) || machine_is(powernv)) {
 		proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
+#ifdef CONFIG_DEBUG_FS
+		debugfs_create_file("eeh_enable", 0600,
+                                    powerpc_debugfs_root, NULL,
+                                    &eeh_enable_dbgfs_ops);
+#endif
+	}
+
 	return 0;
 }
 __initcall(eeh_init_proc);
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index bb61ca5..7100a5b 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -171,6 +171,15 @@ static void eeh_enable_irq(struct pci_dev *dev)
 	}
 }
 
+static bool eeh_dev_removed(struct eeh_dev *edev)
+{
+	/* EEH device removed ? */
+	if (!edev || (edev->mode & EEH_DEV_REMOVED))
+		return true;
+
+	return false;
+}
+
 /**
  * eeh_report_error - Report pci error to each device driver
  * @data: eeh device
@@ -187,10 +196,8 @@ static void *eeh_report_error(void *data, void *userdata)
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
-	/* We might not have the associated PCI device,
-	 * then we should continue for next one.
-	 */
-	if (!dev) return NULL;
+	if (!dev || eeh_dev_removed(edev))
+		return NULL;
 	dev->error_state = pci_channel_io_frozen;
 
 	driver = eeh_pcid_get(dev);
@@ -230,6 +237,9 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata)
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
+	if (!dev || eeh_dev_removed(edev))
+		return NULL;
+
 	driver = eeh_pcid_get(dev);
 	if (!driver) return NULL;
 
@@ -267,7 +277,8 @@ static void *eeh_report_reset(void *data, void *userdata)
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
-	if (!dev) return NULL;
+	if (!dev || eeh_dev_removed(edev))
+		return NULL;
 	dev->error_state = pci_channel_io_normal;
 
 	driver = eeh_pcid_get(dev);
@@ -307,7 +318,8 @@ static void *eeh_report_resume(void *data, void *userdata)
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	struct pci_driver *driver;
 
-	if (!dev) return NULL;
+	if (!dev || eeh_dev_removed(edev))
+		return NULL;
 	dev->error_state = pci_channel_io_normal;
 
 	driver = eeh_pcid_get(dev);
@@ -343,7 +355,8 @@ static void *eeh_report_failure(void *data, void *userdata)
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	struct pci_driver *driver;
 
-	if (!dev) return NULL;
+	if (!dev || eeh_dev_removed(edev))
+		return NULL;
 	dev->error_state = pci_channel_io_perm_failure;
 
 	driver = eeh_pcid_get(dev);
@@ -380,6 +393,16 @@ static void *eeh_rmv_device(void *data, void *userdata)
 	if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
 		return NULL;
 
+	/*
+	 * We rely on count-based pcibios_release_device() to
+	 * detach permanently offlined PEs. Unfortunately, that's
+	 * not reliable enough. We might have the permanently
+	 * offlined PEs attached, but we needn't take care of
+	 * them and their child devices.
+	 */
+	if (eeh_dev_removed(edev))
+		return NULL;
+
 	driver = eeh_pcid_get(dev);
 	if (driver) {
 		eeh_pcid_put(dev);
@@ -417,6 +440,36 @@ static void *eeh_pe_detach_dev(void *data, void *userdata)
 	return NULL;
 }
 
+/*
+ * Explicitly clear PE's frozen state for PowerNV where
+ * we have frozen PE until BAR restore is completed. It's
+ * harmless to clear it for pSeries. To be consistent with
+ * PE reset (for 3 times), we try to clear the frozen state
+ * for 3 times as well.
+ */
+static int eeh_clear_pe_frozen_state(struct eeh_pe *pe)
+{
+	int i, rc;
+
+	for (i = 0; i < 3; i++) {
+		rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+		if (rc)
+			continue;
+		rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
+		if (!rc)
+			break;
+	}
+
+	/* The PE has been isolated, clear it */
+	if (rc)
+		pr_warn("%s: Can't clear frozen PHB#%x-PE#%x (%d)\n",
+			__func__, pe->phb->global_number, pe->addr, rc);
+	else
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+
+	return rc;
+}
+
 /**
  * eeh_reset_device - Perform actual reset of a pci slot
  * @pe: EEH PE
@@ -451,19 +504,33 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 		eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
 	}
 
-	/* Reset the pci controller. (Asserts RST#; resets config space).
+	/*
+	 * Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
 	 * up if the reset failed for some reason.
+	 *
+	 * During the reset, it's very dangerous to have uncontrolled PCI
+	 * config accesses. So we prefer to block them. However, controlled
+	 * PCI config accesses initiated from EEH itself are allowed.
 	 */
+	eeh_pe_state_mark(pe, EEH_PE_RESET);
 	rc = eeh_reset_pe(pe);
-	if (rc)
+	if (rc) {
+		eeh_pe_state_clear(pe, EEH_PE_RESET);
 		return rc;
+	}
 
 	pci_lock_rescan_remove();
 
 	/* Restore PE */
 	eeh_ops->configure_bridge(pe);
 	eeh_pe_restore_bars(pe);
+	eeh_pe_state_clear(pe, EEH_PE_RESET);
+
+	/* Clear frozen state */
+	rc = eeh_clear_pe_frozen_state(pe);
+	if (rc)
+		return rc;
 
 	/* Give the system 5 seconds to finish running the user-space
 	 * hotplug shutdown scripts, e.g. ifdown for ethernet.  Yes,
@@ -573,7 +640,6 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 			result = PCI_ERS_RESULT_NEED_RESET;
 		} else {
 			pr_info("EEH: Notify device drivers to resume I/O\n");
-			result = PCI_ERS_RESULT_NONE;
 			eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
 		}
 	}
@@ -585,10 +651,17 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 
 		if (rc < 0)
 			goto hard_fail;
-		if (rc)
+		if (rc) {
 			result = PCI_ERS_RESULT_NEED_RESET;
-		else
+		} else {
+			/*
+			 * We didn't do PE reset for the case. The PE
+			 * is still in frozen state. Clear it before
+			 * resuming the PE.
+			 */
+			eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 			result = PCI_ERS_RESULT_RECOVERED;
+		}
 	}
 
 	/* If any device has a hard failure, then shut off everything. */
@@ -650,8 +723,17 @@ perm_error:
 	/* Notify all devices that they're about to go down. */
 	eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
 
-	/* Shut down the device drivers for good. */
+	/* Mark the PE to be removed permanently */
+	pe->freeze_count = EEH_MAX_ALLOWED_FREEZES + 1;
+
+	/*
+	 * Shut down the device drivers for good. We mark
+	 * all removed devices correctly to avoid access
+	 * the their PCI config any more.
+	 */
 	if (frozen_bus) {
+		eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+
 		pci_lock_rescan_remove();
 		pcibios_remove_pci_devices(frozen_bus);
 		pci_unlock_rescan_remove();
@@ -682,8 +764,7 @@ static void eeh_handle_special_event(void)
 				phb_pe = eeh_phb_pe_get(hose);
 				if (!phb_pe) continue;
 
-				eeh_pe_state_mark(phb_pe,
-					EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+				eeh_pe_state_mark(phb_pe, EEH_PE_ISOLATED);
 			}
 
 			eeh_serialize_unlock(flags);
@@ -699,8 +780,7 @@ static void eeh_handle_special_event(void)
 			eeh_remove_event(pe);
 
 			if (rc == EEH_NEXT_ERR_DEAD_PHB)
-				eeh_pe_state_mark(pe,
-					EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+				eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 			else
 				eeh_pe_state_mark(pe,
 					EEH_PE_ISOLATED | EEH_PE_RECOVERING);
@@ -724,12 +804,14 @@ static void eeh_handle_special_event(void)
 		if (rc == EEH_NEXT_ERR_FROZEN_PE ||
 		    rc == EEH_NEXT_ERR_FENCED_PHB) {
 			eeh_handle_normal_event(pe);
+			eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
 		} else {
 			pci_lock_rescan_remove();
 			list_for_each_entry(hose, &hose_list, list_node) {
 				phb_pe = eeh_phb_pe_get(hose);
 				if (!phb_pe ||
-				    !(phb_pe->state & EEH_PE_PHB_DEAD))
+				    !(phb_pe->state & EEH_PE_ISOLATED) ||
+				    (phb_pe->state & EEH_PE_RECOVERING))
 					continue;
 
 				/* Notify all devices to be down */
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index f0c353f..995c2a2 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -503,13 +503,17 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 	struct eeh_dev *edev, *tmp;
 	struct pci_dev *pdev;
 
-	/*
-	 * Mark the PE with the indicated state. Also,
-	 * the associated PCI device will be put into
-	 * I/O frozen state to avoid I/O accesses from
-	 * the PCI device driver.
-	 */
+	/* Keep the state of permanently removed PE intact */
+	if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) &&
+	    (state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING)))
+		return NULL;
+
 	pe->state |= state;
+
+	/* Offline PCI devices if applicable */
+	if (state != EEH_PE_ISOLATED)
+		return NULL;
+
 	eeh_pe_for_each_dev(pe, edev, tmp) {
 		pdev = eeh_dev_to_pci_dev(edev);
 		if (pdev)
@@ -532,6 +536,27 @@ void eeh_pe_state_mark(struct eeh_pe *pe, int state)
 	eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
 }
 
+static void *__eeh_pe_dev_mode_mark(void *data, void *flag)
+{
+	struct eeh_dev *edev = data;
+	int mode = *((int *)flag);
+
+	edev->mode |= mode;
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_dev_state_mark - Mark state for all device under the PE
+ * @pe: EEH PE
+ *
+ * Mark specific state for all child devices of the PE.
+ */
+void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode)
+{
+	eeh_pe_dev_traverse(pe, __eeh_pe_dev_mode_mark, &mode);
+}
+
 /**
  * __eeh_pe_state_clear - Clear state for the PE
  * @data: EEH PE
@@ -546,8 +571,16 @@ static void *__eeh_pe_state_clear(void *data, void *flag)
 	struct eeh_pe *pe = (struct eeh_pe *)data;
 	int state = *((int *)flag);
 
+	/* Keep the state of permanently removed PE intact */
+	if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) &&
+	    (state & EEH_PE_ISOLATED))
+		return NULL;
+
 	pe->state &= ~state;
-	pe->check_count = 0;
+
+	/* Clear check count since last isolation */
+	if (state & EEH_PE_ISOLATED)
+		pe->check_count = 0;
 
 	return NULL;
 }
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index 5d753d4..e2595ba 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -59,6 +59,9 @@ void eeh_sysfs_add_device(struct pci_dev *pdev)
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
 	int rc=0;
 
+	if (!eeh_enabled())
+		return;
+
 	if (edev && (edev->mode & EEH_DEV_SYSFS))
 		return;
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 662c6dd..911d453 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -39,8 +39,8 @@
  * System calls.
  */
 	.section	".toc","aw"
-.SYS_CALL_TABLE:
-	.tc .sys_call_table[TC],.sys_call_table
+SYS_CALL_TABLE:
+	.tc sys_call_table[TC],sys_call_table
 
 /* This value is used to mark exception frames on the stack. */
 exception_marker:
@@ -106,7 +106,7 @@ BEGIN_FW_FTR_SECTION
 	LDX_BE	r10,0,r10		/* get log write index */
 	cmpd	cr1,r11,r10
 	beq+	cr1,33f
-	bl	.accumulate_stolen_time
+	bl	accumulate_stolen_time
 	REST_GPR(0,r1)
 	REST_4GPRS(3,r1)
 	REST_2GPRS(7,r1)
@@ -143,7 +143,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	std	r10,SOFTE(r1)
 
 #ifdef SHOW_SYSCALLS
-	bl	.do_show_syscall
+	bl	do_show_syscall
 	REST_GPR(0,r1)
 	REST_4GPRS(3,r1)
 	REST_2GPRS(7,r1)
@@ -162,7 +162,7 @@ system_call:			/* label this so stack traces look sane */
  * Need to vector to 32 Bit or default sys_call_table here,
  * based on caller's run-mode / personality.
  */
-	ld	r11,.SYS_CALL_TABLE@toc(2)
+	ld	r11,SYS_CALL_TABLE@toc(2)
 	andi.	r10,r10,_TIF_32BIT
 	beq	15f
 	addi	r11,r11,8	/* use 32-bit syscall entries */
@@ -174,14 +174,14 @@ system_call:			/* label this so stack traces look sane */
 	clrldi	r8,r8,32
 15:
 	slwi	r0,r0,4
-	ldx	r10,r11,r0	/* Fetch system call handler [ptr] */
-	mtctr   r10
+	ldx	r12,r11,r0	/* Fetch system call handler [ptr] */
+	mtctr   r12
 	bctrl			/* Call handler */
 
 syscall_exit:
 	std	r3,RESULT(r1)
 #ifdef SHOW_SYSCALLS
-	bl	.do_show_syscall_exit
+	bl	do_show_syscall_exit
 	ld	r3,RESULT(r1)
 #endif
 	CURRENT_THREAD_INFO(r12, r1)
@@ -248,9 +248,9 @@ syscall_error:
 	
 /* Traced system call support */
 syscall_dotrace:
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_syscall_trace_enter
+	bl	do_syscall_trace_enter
 	/*
 	 * Restore argument registers possibly just changed.
 	 * We use the return value of do_syscall_trace_enter
@@ -308,7 +308,7 @@ syscall_exit_work:
 4:	/* Anything else left to do? */
 	SET_DEFAULT_THREAD_PPR(r3, r10)		/* Set thread.ppr = 3 */
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	.ret_from_except_lite
+	beq	ret_from_except_lite
 
 	/* Re-enable interrupts */
 #ifdef CONFIG_PPC_BOOK3E
@@ -319,10 +319,10 @@ syscall_exit_work:
 	mtmsrd	r10,1
 #endif /* CONFIG_PPC_BOOK3E */
 
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_syscall_trace_leave
-	b	.ret_from_except
+	bl	do_syscall_trace_leave
+	b	ret_from_except
 
 /* Save non-volatile GPRs, if not already saved. */
 _GLOBAL(save_nvgprs)
@@ -345,52 +345,48 @@ _GLOBAL(save_nvgprs)
  */
 
 _GLOBAL(ppc_fork)
-	bl	.save_nvgprs
-	bl	.sys_fork
+	bl	save_nvgprs
+	bl	sys_fork
 	b	syscall_exit
 
 _GLOBAL(ppc_vfork)
-	bl	.save_nvgprs
-	bl	.sys_vfork
+	bl	save_nvgprs
+	bl	sys_vfork
 	b	syscall_exit
 
 _GLOBAL(ppc_clone)
-	bl	.save_nvgprs
-	bl	.sys_clone
+	bl	save_nvgprs
+	bl	sys_clone
 	b	syscall_exit
 
 _GLOBAL(ppc32_swapcontext)
-	bl	.save_nvgprs
-	bl	.compat_sys_swapcontext
+	bl	save_nvgprs
+	bl	compat_sys_swapcontext
 	b	syscall_exit
 
 _GLOBAL(ppc64_swapcontext)
-	bl	.save_nvgprs
-	bl	.sys_swapcontext
+	bl	save_nvgprs
+	bl	sys_swapcontext
 	b	syscall_exit
 
 _GLOBAL(ret_from_fork)
-	bl	.schedule_tail
+	bl	schedule_tail
 	REST_NVGPRS(r1)
 	li	r3,0
 	b	syscall_exit
 
 _GLOBAL(ret_from_kernel_thread)
-	bl	.schedule_tail
+	bl	schedule_tail
 	REST_NVGPRS(r1)
-	ld	r14, 0(r14)
 	mtlr	r14
 	mr	r3,r15
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+	mr	r12,r14
+#endif
 	blrl
 	li	r3,0
 	b	syscall_exit
 
-	.section	".toc","aw"
-DSCR_DEFAULT:
-	.tc dscr_default[TC],dscr_default
-
-	.section	".text"
-
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -575,11 +571,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
 	lwz	r6,THREAD_DSCR_INHERIT(r4)
-	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
 	cmpwi	r6,0
 	bne	1f
-	ld	r0,0(r7)
+	ld	r0,PACA_DSCR(r13)
 1:
 BEGIN_FTR_SECTION_NESTED(70)
 	mfspr	r8, SPRN_FSCR
@@ -611,7 +606,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 _GLOBAL(ret_from_except)
 	ld	r11,_TRAP(r1)
 	andi.	r0,r11,1
-	bne	.ret_from_except_lite
+	bne	ret_from_except_lite
 	REST_NVGPRS(r1)
 
 _GLOBAL(ret_from_except_lite)
@@ -661,23 +656,23 @@ _GLOBAL(ret_from_except_lite)
 #endif
 1:	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	2f
-	bl	.restore_interrupts
+	bl	restore_interrupts
 	SCHEDULE_USER
-	b	.ret_from_except_lite
+	b	ret_from_except_lite
 2:
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	andi.	r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
 	bne	3f		/* only restore TM if nothing else to do */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.restore_tm_state
+	bl	restore_tm_state
 	b	restore
 3:
 #endif
-	bl	.save_nvgprs
-	bl	.restore_interrupts
+	bl	save_nvgprs
+	bl	restore_interrupts
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_notify_resume
-	b	.ret_from_except
+	bl	do_notify_resume
+	b	ret_from_except
 
 resume_kernel:
 	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
@@ -730,7 +725,7 @@ resume_kernel:
 	 * sure we are soft-disabled first and reconcile irq state.
 	 */
 	RECONCILE_IRQ_STATE(r3,r4)
-1:	bl	.preempt_schedule_irq
+1:	bl	preempt_schedule_irq
 
 	/* Re-test flags and eventually loop */
 	CURRENT_THREAD_INFO(r9, r1)
@@ -792,7 +787,7 @@ restore_no_replay:
 	 */
 do_restore:
 #ifdef CONFIG_PPC_BOOK3E
-	b	.exception_return_book3e
+	b	exception_return_book3e
 #else
 	/*
 	 * Clear the reservation. If we know the CPU tracks the address of
@@ -907,7 +902,7 @@ restore_check_irq_replay:
 	 *
 	 * Still, this might be useful for things like hash_page
 	 */
-	bl	.__check_irq_replay
+	bl	__check_irq_replay
 	cmpwi	cr0,r3,0
  	beq	restore_no_replay
  
@@ -928,13 +923,13 @@ restore_check_irq_replay:
 	cmpwi	cr0,r3,0x500
 	bne	1f
 	addi	r3,r1,STACK_FRAME_OVERHEAD;
- 	bl	.do_IRQ
-	b	.ret_from_except
+ 	bl	do_IRQ
+	b	ret_from_except
 1:	cmpwi	cr0,r3,0x900
 	bne	1f
 	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	.timer_interrupt
-	b	.ret_from_except
+	bl	timer_interrupt
+	b	ret_from_except
 #ifdef CONFIG_PPC_DOORBELL
 1:
 #ifdef CONFIG_PPC_BOOK3E
@@ -948,14 +943,14 @@ restore_check_irq_replay:
 #endif /* CONFIG_PPC_BOOK3E */
 	bne	1f
 	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	.doorbell_exception
-	b	.ret_from_except
+	bl	doorbell_exception
+	b	ret_from_except
 #endif /* CONFIG_PPC_DOORBELL */
-1:	b	.ret_from_except /* What else to do here ? */
+1:	b	ret_from_except /* What else to do here ? */
  
 unrecov_restore:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
+	bl	unrecoverable_exception
 	b	unrecov_restore
 
 #ifdef CONFIG_PPC_RTAS
@@ -1021,7 +1016,7 @@ _GLOBAL(enter_rtas)
         std	r6,PACASAVEDMSR(r13)
 
 	/* Setup our real return addr */	
-	LOAD_REG_ADDR(r4,.rtas_return_loc)
+	LOAD_REG_ADDR(r4,rtas_return_loc)
 	clrldi	r4,r4,2			/* convert to realmode address */
        	mtlr	r4
 
@@ -1045,7 +1040,7 @@ _GLOBAL(enter_rtas)
 	rfid
 	b	.	/* prevent speculative execution */
 
-_STATIC(rtas_return_loc)
+rtas_return_loc:
 	FIXUP_ENDIAN
 
 	/* relocation is off at this point */
@@ -1054,7 +1049,7 @@ _STATIC(rtas_return_loc)
 
 	bcl	20,31,$+4
 0:	mflr	r3
-	ld	r3,(1f-0b)(r3)		/* get &.rtas_restore_regs */
+	ld	r3,(1f-0b)(r3)		/* get &rtas_restore_regs */
 
 	mfmsr   r6
 	li	r0,MSR_RI
@@ -1071,9 +1066,9 @@ _STATIC(rtas_return_loc)
 	b	.	/* prevent speculative execution */
 
 	.align	3
-1:	.llong	.rtas_restore_regs
+1:	.llong	rtas_restore_regs
 
-_STATIC(rtas_restore_regs)
+rtas_restore_regs:
 	/* relocation is on at this point */
 	REST_GPR(2, r1)			/* Restore the TOC */
 	REST_GPR(13, r1)		/* Restore paca */
@@ -1173,7 +1168,7 @@ _GLOBAL(mcount)
 _GLOBAL(_mcount)
 	blr
 
-_GLOBAL(ftrace_caller)
+_GLOBAL_TOC(ftrace_caller)
 	/* Taken from output of objdump from lib64/glibc */
 	mflr	r3
 	ld	r11, 0(r1)
@@ -1197,10 +1192,7 @@ _GLOBAL(ftrace_graph_stub)
 _GLOBAL(ftrace_stub)
 	blr
 #else
-_GLOBAL(mcount)
-	blr
-
-_GLOBAL(_mcount)
+_GLOBAL_TOC(_mcount)
 	/* Taken from output of objdump from lib64/glibc */
 	mflr	r3
 	ld	r11, 0(r1)
@@ -1238,7 +1230,7 @@ _GLOBAL(ftrace_graph_caller)
 	ld	r11, 112(r1)
 	addi	r3, r11, 16
 
-	bl	.prepare_ftrace_return
+	bl	prepare_ftrace_return
 	nop
 
 	ld	r0, 128(r1)
@@ -1254,7 +1246,7 @@ _GLOBAL(return_to_handler)
 	mr	r31, r1
 	stdu	r1, -112(r1)
 
-	bl	.ftrace_return_to_handler
+	bl	ftrace_return_to_handler
 	nop
 
 	/* return value has real return address */
@@ -1284,7 +1276,7 @@ _GLOBAL(mod_return_to_handler)
 	 */
 	ld	r2, PACATOC(r13)
 
-	bl	.ftrace_return_to_handler
+	bl	ftrace_return_to_handler
 	nop
 
 	/* return value has real return address */
diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c
index 60d1a22..59e4ba74 100644
--- a/arch/powerpc/kernel/epapr_paravirt.c
+++ b/arch/powerpc/kernel/epapr_paravirt.c
@@ -30,6 +30,7 @@ extern u32 epapr_ev_idle_start[];
 #endif
 
 bool epapr_paravirt_enabled;
+static bool __maybe_unused epapr_has_idle;
 
 static int __init early_init_dt_scan_epapr(unsigned long node,
 					   const char *uname,
@@ -56,7 +57,7 @@ static int __init early_init_dt_scan_epapr(unsigned long node,
 
 #if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
 	if (of_get_flat_dt_prop(node, "has-idle", NULL))
-		ppc_md.power_save = epapr_ev_idle;
+		epapr_has_idle = true;
 #endif
 
 	epapr_paravirt_enabled = true;
@@ -71,3 +72,14 @@ int __init epapr_paravirt_early_init(void)
 	return 0;
 }
 
+static int __init epapr_idle_init(void)
+{
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
+	if (epapr_has_idle)
+		ppc_md.power_save = epapr_ev_idle;
+#endif
+
+	return 0;
+}
+
+postcore_initcall(epapr_idle_init);
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index c1bee3c..771b4e9 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -499,7 +499,7 @@ exc_##n##_bad_stack:							    \
 	CHECK_NAPPING();						\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
 	bl	hdlr;							\
-	b	.ret_from_except_lite;
+	b	ret_from_except_lite;
 
 /* This value is used to mark exception frames on the stack. */
 	.section	".toc","aw"
@@ -550,11 +550,11 @@ interrupt_end_book3e:
 	CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
 			      PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON_CRIT(0x100)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	bl	special_reg_save
 	CHECK_NAPPING();
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unknown_exception
+	bl	unknown_exception
 	b	ret_from_crit_except
 
 /* Machine Check Interrupt */
@@ -562,11 +562,11 @@ interrupt_end_book3e:
 	MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
 			    PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON_MC(0x000)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	bl	special_reg_save
 	CHECK_NAPPING();
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.machine_check_exception
+	bl	machine_check_exception
 	b	ret_from_mc_except
 
 /* Data Storage Interrupt */
@@ -591,7 +591,7 @@ interrupt_end_book3e:
 
 /* External Input Interrupt */
 	MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
-			   external_input, .do_IRQ, ACK_NONE)
+			   external_input, do_IRQ, ACK_NONE)
 
 /* Alignment */
 	START_EXCEPTION(alignment);
@@ -612,9 +612,9 @@ interrupt_end_book3e:
 	std	r14,_DSISR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r14,PACA_EXGEN+EX_R14(r13)
-	bl	.save_nvgprs
-	bl	.program_check_exception
-	b	.ret_from_except
+	bl	save_nvgprs
+	bl	program_check_exception
+	b	ret_from_except
 
 /* Floating Point Unavailable Interrupt */
 	START_EXCEPTION(fp_unavailable);
@@ -625,13 +625,13 @@ interrupt_end_book3e:
 	ld	r12,_MSR(r1)
 	andi.	r0,r12,MSR_PR;
 	beq-	1f
-	bl	.load_up_fpu
+	bl	load_up_fpu
 	b	fast_exception_return
 1:	INTS_DISABLE
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.kernel_fp_unavailable_exception
-	b	.ret_from_except
+	bl	kernel_fp_unavailable_exception
+	b	ret_from_except
 
 /* Altivec Unavailable Interrupt */
 	START_EXCEPTION(altivec_unavailable);
@@ -644,16 +644,16 @@ BEGIN_FTR_SECTION
 	ld	r12,_MSR(r1)
 	andi.	r0,r12,MSR_PR;
 	beq-	1f
-	bl	.load_up_altivec
+	bl	load_up_altivec
 	b	fast_exception_return
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
 	INTS_DISABLE
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.altivec_unavailable_exception
-	b	.ret_from_except
+	bl	altivec_unavailable_exception
+	b	ret_from_except
 
 /* AltiVec Assist */
 	START_EXCEPTION(altivec_assist);
@@ -662,39 +662,39 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x220)
 	INTS_DISABLE
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
-	bl	.altivec_assist_exception
+	bl	altivec_assist_exception
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #else
-	bl	.unknown_exception
+	bl	unknown_exception
 #endif
-	b	.ret_from_except
+	b	ret_from_except
 
 
 /* Decrementer Interrupt */
 	MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
-			   decrementer, .timer_interrupt, ACK_DEC)
+			   decrementer, timer_interrupt, ACK_DEC)
 
 /* Fixed Interval Timer Interrupt */
 	MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
-			   fixed_interval, .unknown_exception, ACK_FIT)
+			   fixed_interval, unknown_exception, ACK_FIT)
 
 /* Watchdog Timer Interrupt */
 	START_EXCEPTION(watchdog);
 	CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
 			      PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON_CRIT(0x9f0)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	bl	special_reg_save
 	CHECK_NAPPING();
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_BOOKE_WDT
-	bl	.WatchdogException
+	bl	WatchdogException
 #else
-	bl	.unknown_exception
+	bl	unknown_exception
 #endif
 	b	ret_from_crit_except
 
@@ -712,10 +712,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0xf20)
 	INTS_DISABLE
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unknown_exception
-	b	.ret_from_except
+	bl	unknown_exception
+	b	ret_from_except
 
 /* Debug exception as a critical interrupt*/
 	START_EXCEPTION(debug_crit);
@@ -774,9 +774,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	mr	r4,r14
 	ld	r14,PACA_EXCRIT+EX_R14(r13)
 	ld	r15,PACA_EXCRIT+EX_R15(r13)
-	bl	.save_nvgprs
-	bl	.DebugException
-	b	.ret_from_except
+	bl	save_nvgprs
+	bl	DebugException
+	b	ret_from_except
 
 kernel_dbg_exc:
 	b	.	/* NYI */
@@ -839,9 +839,9 @@ kernel_dbg_exc:
 	mr	r4,r14
 	ld	r14,PACA_EXDBG+EX_R14(r13)
 	ld	r15,PACA_EXDBG+EX_R15(r13)
-	bl	.save_nvgprs
-	bl	.DebugException
-	b	.ret_from_except
+	bl	save_nvgprs
+	bl	DebugException
+	b	ret_from_except
 
 	START_EXCEPTION(perfmon);
 	NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
@@ -850,23 +850,23 @@ kernel_dbg_exc:
 	INTS_DISABLE
 	CHECK_NAPPING()
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.performance_monitor_exception
-	b	.ret_from_except_lite
+	bl	performance_monitor_exception
+	b	ret_from_except_lite
 
 /* Doorbell interrupt */
 	MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
-			   doorbell, .doorbell_exception, ACK_NONE)
+			   doorbell, doorbell_exception, ACK_NONE)
 
 /* Doorbell critical Interrupt */
 	START_EXCEPTION(doorbell_crit);
 	CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
 			      PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON_CRIT(0x2a0)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	bl	special_reg_save
 	CHECK_NAPPING();
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unknown_exception
+	bl	unknown_exception
 	b	ret_from_crit_except
 
 /*
@@ -878,21 +878,21 @@ kernel_dbg_exc:
 			        PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x2c0)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	INTS_RESTORE_HARD
-	bl	.unknown_exception
-	b	.ret_from_except
+	bl	unknown_exception
+	b	ret_from_except
 
 /* Guest Doorbell critical Interrupt */
 	START_EXCEPTION(guest_doorbell_crit);
 	CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
 			      PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON_CRIT(0x2e0)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	bl	special_reg_save
 	CHECK_NAPPING();
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unknown_exception
+	bl	unknown_exception
 	b	ret_from_crit_except
 
 /* Hypervisor call */
@@ -901,10 +901,10 @@ kernel_dbg_exc:
 			        PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x310)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	INTS_RESTORE_HARD
-	bl	.unknown_exception
-	b	.ret_from_except
+	bl	unknown_exception
+	b	ret_from_except
 
 /* Embedded Hypervisor priviledged  */
 	START_EXCEPTION(ehpriv);
@@ -912,10 +912,10 @@ kernel_dbg_exc:
 			        PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x320)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	INTS_RESTORE_HARD
-	bl	.unknown_exception
-	b	.ret_from_except
+	bl	unknown_exception
+	b	ret_from_except
 
 /* LRAT Error interrupt */
 	START_EXCEPTION(lrat_error);
@@ -1014,16 +1014,16 @@ storage_fault_common:
 	mr	r5,r15
 	ld	r14,PACA_EXGEN+EX_R14(r13)
 	ld	r15,PACA_EXGEN+EX_R15(r13)
-	bl	.do_page_fault
+	bl	do_page_fault
 	cmpdi	r3,0
 	bne-	1f
-	b	.ret_from_except_lite
-1:	bl	.save_nvgprs
+	b	ret_from_except_lite
+1:	bl	save_nvgprs
 	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r4,_DAR(r1)
-	bl	.bad_page_fault
-	b	.ret_from_except
+	bl	bad_page_fault
+	b	ret_from_except
 
 /*
  * Alignment exception doesn't fit entirely in the 0x100 bytes so it
@@ -1035,10 +1035,10 @@ alignment_more:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r14,PACA_EXGEN+EX_R14(r13)
 	ld	r15,PACA_EXGEN+EX_R15(r13)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	INTS_RESTORE_HARD
-	bl	.alignment_exception
-	b	.ret_from_except
+	bl	alignment_exception
+	b	ret_from_except
 
 /*
  * We branch here from entry_64.S for the last stage of the exception
@@ -1172,7 +1172,7 @@ bad_stack_book3e:
 	std	r12,0(r11)
 	ld	r2,PACATOC(r13)
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.kernel_bad_stack
+	bl	kernel_bad_stack
 	b	1b
 
 /*
@@ -1521,13 +1521,13 @@ _GLOBAL(start_initialization_book3e)
 	 * and always use AS 0, so we just set it up to match our link
 	 * address and never use 0 based addresses.
 	 */
-	bl	.initial_tlb_book3e
+	bl	initial_tlb_book3e
 
 	/* Init global core bits */
-	bl	.init_core_book3e
+	bl	init_core_book3e
 
 	/* Init per-thread bits */
-	bl	.init_thread_book3e
+	bl	init_thread_book3e
 
 	/* Return to common init code */
 	tovirt(r28,r28)
@@ -1548,7 +1548,7 @@ _GLOBAL(start_initialization_book3e)
  */
 _GLOBAL(book3e_secondary_core_init_tlb_set)
 	li	r4,1
-	b	.generic_secondary_smp_init
+	b	generic_secondary_smp_init
 
 _GLOBAL(book3e_secondary_core_init)
 	mflr	r28
@@ -1558,18 +1558,18 @@ _GLOBAL(book3e_secondary_core_init)
 	bne	2f
 
 	/* Setup TLB for this core */
-	bl	.initial_tlb_book3e
+	bl	initial_tlb_book3e
 
 	/* We can return from the above running at a different
 	 * address, so recalculate r2 (TOC)
 	 */
-	bl	.relative_toc
+	bl	relative_toc
 
 	/* Init global core bits */
-2:	bl	.init_core_book3e
+2:	bl	init_core_book3e
 
 	/* Init per-thread bits */
-3:	bl	.init_thread_book3e
+3:	bl	init_thread_book3e
 
 	/* Return to common init code at proper virtual address.
 	 *
@@ -1596,14 +1596,14 @@ _GLOBAL(book3e_secondary_thread_init)
 	mflr	r28
 	b	3b
 
-_STATIC(init_core_book3e)
+init_core_book3e:
 	/* Establish the interrupt vector base */
 	LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
 	mtspr	SPRN_IVPR,r3
 	sync
 	blr
 
-_STATIC(init_thread_book3e)
+init_thread_book3e:
 	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
 	mtspr	SPRN_EPCR,r3
 
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 3afd391..20f11eb 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -132,12 +132,12 @@ BEGIN_FTR_SECTION
 #endif
 
 	beq	cr1,2f
-	b	.power7_wakeup_noloss
-2:	b	.power7_wakeup_loss
+	b	power7_wakeup_noloss
+2:	b	power7_wakeup_loss
 
 	/* Fast Sleep wakeup on PowerNV */
 8:	GET_PACA(r13)
-	b 	.power7_wakeup_tb_loss
+	b 	power7_wakeup_tb_loss
 
 9:
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
@@ -211,16 +211,16 @@ data_access_slb_pSeries:
 #endif /* __DISABLED__ */
 	mfspr	r12,SPRN_SRR1
 #ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
+	b	slb_miss_realmode
 #else
 	/*
-	 * We can't just use a direct branch to .slb_miss_realmode
+	 * We can't just use a direct branch to slb_miss_realmode
 	 * because the distance from here to there depends on where
 	 * the kernel ends up being put.
 	 */
 	mfctr	r11
 	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
+	LOAD_HANDLER(r10, slb_miss_realmode)
 	mtctr	r10
 	bctr
 #endif
@@ -243,11 +243,11 @@ instruction_access_slb_pSeries:
 #endif /* __DISABLED__ */
 	mfspr	r12,SPRN_SRR1
 #ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
+	b	slb_miss_realmode
 #else
 	mfctr	r11
 	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
+	LOAD_HANDLER(r10, slb_miss_realmode)
 	mtctr	r10
 	bctr
 #endif
@@ -524,7 +524,7 @@ do_stab_bolted_pSeries:
 	std	r12,PACA_EXSLB+EX_R12(r13)
 	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
-	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
+	EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD)
 
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
 	KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
@@ -769,38 +769,38 @@ kvmppc_skip_Hinterrupt:
 
 /*** Common interrupt handlers ***/
 
-	STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+	STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception)
 
 	STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
-	STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
-	STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
+	STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt)
+	STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt)
 #ifdef CONFIG_PPC_DOORBELL
-	STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception)
+	STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception)
 #else
-	STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception)
+	STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception)
 #endif
-	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
-	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt)
-	STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
+	STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception)
+	STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
+	STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
+	STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
+	STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception)
 #ifdef CONFIG_PPC_DOORBELL
-	STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception)
+	STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
 #else
-	STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception)
+	STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception)
 #endif
-	STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
-	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
-	STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
+	STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception)
+	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception)
+	STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception)
 #ifdef CONFIG_ALTIVEC
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+	STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception)
 #else
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+	STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception)
 #endif
 #ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
-	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
-	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception)
+	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception)
+	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception)
 #endif /* CONFIG_CBE_RAS */
 
 	/*
@@ -829,16 +829,16 @@ data_access_slb_relon_pSeries:
 	mfspr	r3,SPRN_DAR
 	mfspr	r12,SPRN_SRR1
 #ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
+	b	slb_miss_realmode
 #else
 	/*
-	 * We can't just use a direct branch to .slb_miss_realmode
+	 * We can't just use a direct branch to slb_miss_realmode
 	 * because the distance from here to there depends on where
 	 * the kernel ends up being put.
 	 */
 	mfctr	r11
 	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
+	LOAD_HANDLER(r10, slb_miss_realmode)
 	mtctr	r10
 	bctr
 #endif
@@ -854,11 +854,11 @@ instruction_access_slb_relon_pSeries:
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 	mfspr	r12,SPRN_SRR1
 #ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
+	b	slb_miss_realmode
 #else
 	mfctr	r11
 	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
+	LOAD_HANDLER(r10, slb_miss_realmode)
 	mtctr	r10
 	bctr
 #endif
@@ -966,7 +966,7 @@ system_call_entry:
 	b	system_call_common
 
 ppc64_runlatch_on_trampoline:
-	b	.__ppc64_runlatch_on
+	b	__ppc64_runlatch_on
 
 /*
  * Here we have detected that the kernel stack pointer is bad.
@@ -1025,7 +1025,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	std	r12,RESULT(r1)
 	std	r11,STACK_FRAME_OVERHEAD-16(r1)
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.kernel_bad_stack
+	bl	kernel_bad_stack
 	b	1b
 
 /*
@@ -1046,7 +1046,7 @@ data_access_common:
 	ld	r3,PACA_EXGEN+EX_DAR(r13)
 	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
 	li	r5,0x300
-	b	.do_hash_page		/* Try to handle as hpte fault */
+	b	do_hash_page		/* Try to handle as hpte fault */
 
 	.align  7
 	.globl  h_data_storage_common
@@ -1056,11 +1056,11 @@ h_data_storage_common:
 	mfspr   r10,SPRN_HDSISR
 	stw     r10,PACA_EXGEN+EX_DSISR(r13)
 	EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
-	bl      .save_nvgprs
+	bl      save_nvgprs
 	DISABLE_INTS
 	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl      .unknown_exception
-	b       .ret_from_except
+	bl      unknown_exception
+	b       ret_from_except
 
 	.align	7
 	.globl instruction_access_common
@@ -1071,9 +1071,9 @@ instruction_access_common:
 	ld	r3,_NIP(r1)
 	andis.	r4,r12,0x5820
 	li	r5,0x400
-	b	.do_hash_page		/* Try to handle as hpte fault */
+	b	do_hash_page		/* Try to handle as hpte fault */
 
-	STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+	STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
 
 /*
  * Here is the common SLB miss user that is used when going to virtual
@@ -1088,7 +1088,7 @@ slb_miss_user_common:
 	stw	r9,PACA_EXGEN+EX_CCR(r13)
 	std	r10,PACA_EXGEN+EX_LR(r13)
 	std	r11,PACA_EXGEN+EX_SRR0(r13)
-	bl	.slb_allocate_user
+	bl	slb_allocate_user
 
 	ld	r10,PACA_EXGEN+EX_LR(r13)
 	ld	r3,PACA_EXGEN+EX_R3(r13)
@@ -1131,9 +1131,9 @@ slb_miss_fault:
 unrecov_user_slb:
 	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
 	DISABLE_INTS
-	bl	.save_nvgprs
+	bl	save_nvgprs
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
+	bl	unrecoverable_exception
 	b	1b
 
 #endif /* __DISABLED__ */
@@ -1158,10 +1158,10 @@ machine_check_common:
 	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.machine_check_exception
-	b	.ret_from_except
+	bl	machine_check_exception
+	b	ret_from_except
 
 	.align	7
 	.globl alignment_common
@@ -1175,31 +1175,31 @@ alignment_common:
 	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.alignment_exception
-	b	.ret_from_except
+	bl	alignment_exception
+	b	ret_from_except
 
 	.align	7
 	.globl program_check_common
 program_check_common:
 	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.program_check_exception
-	b	.ret_from_except
+	bl	program_check_exception
+	b	ret_from_except
 
 	.align	7
 	.globl fp_unavailable_common
 fp_unavailable_common:
 	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
 	bne	1f			/* if from user, just load it up */
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.kernel_fp_unavailable_exception
+	bl	kernel_fp_unavailable_exception
 	BUG_OPCODE
 1:
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -1211,15 +1211,15 @@ BEGIN_FTR_SECTION
 	bne-	2f
 END_FTR_SECTION_IFSET(CPU_FTR_TM)
 #endif
-	bl	.load_up_fpu
+	bl	load_up_fpu
 	b	fast_exception_return
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.fp_unavailable_tm
-	b	.ret_from_except
+	bl	fp_unavailable_tm
+	b	ret_from_except
 #endif
 	.align	7
 	.globl altivec_unavailable_common
@@ -1237,24 +1237,24 @@ BEGIN_FTR_SECTION
 	bne-	2f
   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
 #endif
-	bl	.load_up_altivec
+	bl	load_up_altivec
 	b	fast_exception_return
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.altivec_unavailable_tm
-	b	.ret_from_except
+	bl	altivec_unavailable_tm
+	b	ret_from_except
 #endif
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.altivec_unavailable_exception
-	b	.ret_from_except
+	bl	altivec_unavailable_exception
+	b	ret_from_except
 
 	.align	7
 	.globl vsx_unavailable_common
@@ -1272,26 +1272,26 @@ BEGIN_FTR_SECTION
 	bne-	2f
   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
 #endif
-	b	.load_up_vsx
+	b	load_up_vsx
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.vsx_unavailable_tm
-	b	.ret_from_except
+	bl	vsx_unavailable_tm
+	b	ret_from_except
 #endif
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.vsx_unavailable_exception
-	b	.ret_from_except
+	bl	vsx_unavailable_exception
+	b	ret_from_except
 
-	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
-	STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
+	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception)
+	STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception)
 
 	.align	7
 	.globl	__end_handlers
@@ -1386,9 +1386,9 @@ _GLOBAL(opal_mc_secondary_handler)
 machine_check_handle_early:
 	std	r0,GPR0(r1)	/* Save r0 */
 	EXCEPTION_PROLOG_COMMON_3(0x200)
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.machine_check_early
+	bl	machine_check_early
 	ld	r12,_MSR(r1)
 #ifdef	CONFIG_PPC_P7_NAP
 	/*
@@ -1408,11 +1408,11 @@ machine_check_handle_early:
 	/* Supervisor state loss */
 	li	r0,1
 	stb	r0,PACA_NAPSTATELOST(r13)
-3:	bl	.machine_check_queue_event
+3:	bl	machine_check_queue_event
 	MACHINE_CHECK_HANDLER_WINDUP
 	GET_PACA(r13)
 	ld	r1,PACAR1(r13)
-	b	.power7_enter_nap_mode
+	b	power7_enter_nap_mode
 4:
 #endif
 	/*
@@ -1444,7 +1444,7 @@ machine_check_handle_early:
 	andi.	r11,r12,MSR_RI
 	bne	2f
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
+	bl	unrecoverable_exception
 	b	1b
 2:
 	/*
@@ -1452,7 +1452,7 @@ machine_check_handle_early:
 	 * Queue up the MCE event so that we can log it later, while
 	 * returning from kernel or opal call.
 	 */
-	bl	.machine_check_queue_event
+	bl	machine_check_queue_event
 	MACHINE_CHECK_HANDLER_WINDUP
 	rfid
 9:
@@ -1468,7 +1468,7 @@ machine_check_handle_early:
  * r3 is saved in paca->slb_r3
  * We assume we aren't going to take any exceptions during this procedure.
  */
-_GLOBAL(slb_miss_realmode)
+slb_miss_realmode:
 	mflr	r10
 #ifdef CONFIG_RELOCATABLE
 	mtctr	r11
@@ -1477,7 +1477,7 @@ _GLOBAL(slb_miss_realmode)
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
 
-	bl	.slb_allocate_realmode
+	bl	slb_allocate_realmode
 
 	/* All done -- return from exception. */
 
@@ -1517,9 +1517,9 @@ _GLOBAL(slb_miss_realmode)
 unrecov_slb:
 	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
 	DISABLE_INTS
-	bl	.save_nvgprs
+	bl	save_nvgprs
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
+	bl	unrecoverable_exception
 	b	1b
 
 
@@ -1536,7 +1536,7 @@ power4_fixup_nap:
  * Hash table stuff
  */
 	.align	7
-_STATIC(do_hash_page)
+do_hash_page:
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
 
@@ -1573,7 +1573,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
 	 *
 	 * at return r3 = 0 for success, 1 for page fault, negative for error
 	 */
-	bl	.hash_page		/* build HPTE if possible */
+	bl	hash_page		/* build HPTE if possible */
 	cmpdi	r3,0			/* see if hash_page succeeded */
 
 	/* Success */
@@ -1587,35 +1587,35 @@ handle_page_fault:
 11:	ld	r4,_DAR(r1)
 	ld	r5,_DSISR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_page_fault
+	bl	do_page_fault
 	cmpdi	r3,0
 	beq+	12f
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	lwz	r4,_DAR(r1)
-	bl	.bad_page_fault
-	b	.ret_from_except
+	bl	bad_page_fault
+	b	ret_from_except
 
 /* We have a data breakpoint exception - handle it */
 handle_dabr_fault:
-	bl	.save_nvgprs
+	bl	save_nvgprs
 	ld      r4,_DAR(r1)
 	ld      r5,_DSISR(r1)
 	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl      .do_break
-12:	b       .ret_from_except_lite
+	bl      do_break
+12:	b       ret_from_except_lite
 
 
 /* We have a page fault that hash_page could handle but HV refused
  * the PTE insertion
  */
-13:	bl	.save_nvgprs
+13:	bl	save_nvgprs
 	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r4,_DAR(r1)
-	bl	.low_hash_fault
-	b	.ret_from_except
+	bl	low_hash_fault
+	b	ret_from_except
 
 /*
  * We come here as a result of a DSI at a point where we don't want
@@ -1624,16 +1624,16 @@ handle_dabr_fault:
  * were soft-disabled.  We want to invoke the exception handler for
  * the access, or panic if there isn't a handler.
  */
-77:	bl	.save_nvgprs
+77:	bl	save_nvgprs
 	mr	r4,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r5,SIGSEGV
-	bl	.bad_page_fault
-	b	.ret_from_except
+	bl	bad_page_fault
+	b	ret_from_except
 
 	/* here we have a segment miss */
 do_ste_alloc:
-	bl	.ste_allocate		/* try to insert stab entry */
+	bl	ste_allocate		/* try to insert stab entry */
 	cmpdi	r3,0
 	bne-	handle_page_fault
 	b	fast_exception_return
@@ -1646,7 +1646,7 @@ do_ste_alloc:
  * We assume (DAR >> 60) == 0xc.
  */
 	.align	7
-_GLOBAL(do_stab_bolted)
+do_stab_bolted:
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
 	mfspr	r11,SPRN_DAR			/* ea */
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 7213d93..742694c 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -69,7 +69,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
 	 */
 	token = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL);
 	if (!token)
-		return 0;
+		return 1;
 
 	fw_dump.fadump_supported = 1;
 	fw_dump.ibm_configure_kernel_dump = *token;
@@ -92,7 +92,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
 					&size);
 
 	if (!sections)
-		return 0;
+		return 1;
 
 	num_sections = size / (3 * sizeof(u32));
 
@@ -110,6 +110,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
 			break;
 		}
 	}
+
 	return 1;
 }
 
@@ -645,7 +646,7 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
 		}
 		/* Lower 4 bytes of reg_value contains logical cpu id */
 		cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
-		if (!cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
+		if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
 			SKIP_TO_NEXT_CPU(reg_entry);
 			continue;
 		}
@@ -662,9 +663,11 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
 	}
 	fadump_final_note(note_buf);
 
-	pr_debug("Updating elfcore header (%llx) with cpu notes\n",
+	if (fdh) {
+		pr_debug("Updating elfcore header (%llx) with cpu notes\n",
 							fdh->elfcorehdr_addr);
-	fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr));
+		fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr));
+	}
 	return 0;
 
 error_out:
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 6a014c7..f202d07 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -105,11 +105,9 @@ __ftrace_make_nop(struct module *mod,
 		  struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int op;
-	unsigned int jmp[5];
 	unsigned long ptr;
 	unsigned long ip = rec->ip;
-	unsigned long tramp;
-	int offset;
+	void *tramp;
 
 	/* read where this goes */
 	if (probe_kernel_read(&op, (void *)ip, sizeof(int)))
@@ -122,96 +120,41 @@ __ftrace_make_nop(struct module *mod,
 	}
 
 	/* lets find where the pointer goes */
-	tramp = find_bl_target(ip, op);
-
-	/*
-	 * On PPC64 the trampoline looks like:
-	 * 0x3d, 0x82, 0x00, 0x00,    addis   r12,r2, <high>
-	 * 0x39, 0x8c, 0x00, 0x00,    addi    r12,r12, <low>
-	 *   Where the bytes 2,3,6 and 7 make up the 32bit offset
-	 *   to the TOC that holds the pointer.
-	 *   to jump to.
-	 * 0xf8, 0x41, 0x00, 0x28,    std     r2,40(r1)
-	 * 0xe9, 0x6c, 0x00, 0x20,    ld      r11,32(r12)
-	 *   The actually address is 32 bytes from the offset
-	 *   into the TOC.
-	 * 0xe8, 0x4c, 0x00, 0x28,    ld      r2,40(r12)
-	 */
-
-	pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
-
-	/* Find where the trampoline jumps to */
-	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
-		printk(KERN_ERR "Failed to read %lx\n", tramp);
-		return -EFAULT;
-	}
+	tramp = (void *)find_bl_target(ip, op);
 
-	pr_devel(" %08x %08x", jmp[0], jmp[1]);
+	pr_devel("ip:%lx jumps to %p", ip, tramp);
 
-	/* verify that this is what we expect it to be */
-	if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
-	    ((jmp[1] & 0xffff0000) != 0x398c0000) ||
-	    (jmp[2] != 0xf8410028) ||
-	    (jmp[3] != 0xe96c0020) ||
-	    (jmp[4] != 0xe84c0028)) {
+	if (!is_module_trampoline(tramp)) {
 		printk(KERN_ERR "Not a trampoline\n");
 		return -EINVAL;
 	}
 
-	/* The bottom half is signed extended */
-	offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
-		(int)((short)jmp[1]);
-
-	pr_devel(" %x ", offset);
-
-	/* get the address this jumps too */
-	tramp = mod->arch.toc + offset + 32;
-	pr_devel("toc: %lx", tramp);
-
-	if (probe_kernel_read(jmp, (void *)tramp, 8)) {
-		printk(KERN_ERR "Failed to read %lx\n", tramp);
+	if (module_trampoline_target(mod, tramp, &ptr)) {
+		printk(KERN_ERR "Failed to get trampoline target\n");
 		return -EFAULT;
 	}
 
-	pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
-
-#ifdef __LITTLE_ENDIAN__
-	ptr = ((unsigned long)jmp[1] << 32) + jmp[0];
-#else
-	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
-#endif
+	pr_devel("trampoline target %lx", ptr);
 
 	/* This should match what was called */
 	if (ptr != ppc_function_entry((void *)addr)) {
-		printk(KERN_ERR "addr does not match %lx\n", ptr);
+		printk(KERN_ERR "addr %lx does not match expected %lx\n",
+			ptr, ppc_function_entry((void *)addr));
 		return -EINVAL;
 	}
 
 	/*
-	 * We want to nop the line, but the next line is
-	 *  0xe8, 0x41, 0x00, 0x28   ld r2,40(r1)
-	 * This needs to be turned to a nop too.
-	 */
-	if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE))
-		return -EFAULT;
-
-	if (op != 0xe8410028) {
-		printk(KERN_ERR "Next line is not ld! (%08x)\n", op);
-		return -EINVAL;
-	}
-
-	/*
-	 * Milton Miller pointed out that we can not blindly do nops.
-	 * If a task was preempted when calling a trace function,
-	 * the nops will remove the way to restore the TOC in r2
-	 * and the r2 TOC will get corrupted.
-	 */
-
-	/*
-	 * Replace:
-	 *   bl <tramp>  <==== will be replaced with "b 1f"
-	 *   ld r2,40(r1)
-	 *  1:
+	 * Our original call site looks like:
+	 *
+	 * bl <tramp>
+	 * ld r2,XX(r1)
+	 *
+	 * Milton Miller pointed out that we can not simply nop the branch.
+	 * If a task was preempted when calling a trace function, the nops
+	 * will remove the way to restore the TOC in r2 and the r2 TOC will
+	 * get corrupted.
+	 *
+	 * Use a b +8 to jump over the load.
 	 */
 	op = 0x48000008;	/* b +8 */
 
@@ -349,19 +292,24 @@ static int
 __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int op[2];
-	unsigned long ip = rec->ip;
+	void *ip = (void *)rec->ip;
 
 	/* read where this goes */
-	if (probe_kernel_read(op, (void *)ip, MCOUNT_INSN_SIZE * 2))
+	if (probe_kernel_read(op, ip, sizeof(op)))
 		return -EFAULT;
 
 	/*
-	 * It should be pointing to two nops or
-	 *  b +8; ld r2,40(r1)
+	 * We expect to see:
+	 *
+	 * b +8
+	 * ld r2,XX(r1)
+	 *
+	 * The load offset is different depending on the ABI. For simplicity
+	 * just mask it out when doing the compare.
 	 */
-	if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) &&
-	    ((op[0] != PPC_INST_NOP) || (op[1] != PPC_INST_NOP))) {
-		printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]);
+	if ((op[0] != 0x48000008) || ((op[1] & 0xffff00000) != 0xe8410000)) {
+		printk(KERN_ERR "Unexpected call sequence: %x %x\n",
+			op[0], op[1]);
 		return -EINVAL;
 	}
 
@@ -371,23 +319,16 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 		return -EINVAL;
 	}
 
-	/* create the branch to the trampoline */
-	op[0] = create_branch((unsigned int *)ip,
-			      rec->arch.mod->arch.tramp, BRANCH_SET_LINK);
-	if (!op[0]) {
-		printk(KERN_ERR "REL24 out of range!\n");
+	/* Ensure branch is within 24 bits */
+	if (create_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
+		printk(KERN_ERR "Branch out of range");
 		return -EINVAL;
 	}
 
-	/* ld r2,40(r1) */
-	op[1] = 0xe8410028;
-
-	pr_devel("write to %lx\n", rec->ip);
-
-	if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
-		return -EPERM;
-
-	flush_icache_range(ip, ip + 8);
+	if (patch_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
+		printk(KERN_ERR "REL24 out of range!\n");
+		return -EINVAL;
+	}
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b7363bd..a95145d 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -70,16 +70,15 @@ _GLOBAL(__start)
 	/* NOP this out unconditionally */
 BEGIN_FTR_SECTION
 	FIXUP_ENDIAN
-	b	.__start_initialization_multiplatform
+	b	__start_initialization_multiplatform
 END_FTR_SECTION(0, 1)
 
 	/* Catch branch to 0 in real mode */
 	trap
 
-	/* Secondary processors spin on this value until it becomes nonzero.
-	 * When it does it contains the real address of the descriptor
-	 * of the function that the cpu should jump to to continue
-	 * initialization.
+	/* Secondary processors spin on this value until it becomes non-zero.
+	 * When non-zero, it contains the real address of the function the cpu
+	 * should jump to.
 	 */
 	.balign 8
 	.globl  __secondary_hold_spinloop
@@ -140,16 +139,15 @@ __secondary_hold:
 	tovirt(r26,r26)
 #endif
 	/* All secondary cpus wait here until told to start. */
-100:	ld	r4,__secondary_hold_spinloop-_stext(r26)
-	cmpdi	0,r4,0
+100:	ld	r12,__secondary_hold_spinloop-_stext(r26)
+	cmpdi	0,r12,0
 	beq	100b
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
 #ifdef CONFIG_PPC_BOOK3E
-	tovirt(r4,r4)
+	tovirt(r12,r12)
 #endif
-	ld	r4,0(r4)		/* deref function descriptor */
-	mtctr	r4
+	mtctr	r12
 	mr	r3,r24
 	/*
 	 * it may be the case that other platforms have r4 right to
@@ -186,16 +184,16 @@ _GLOBAL(generic_secondary_thread_init)
 	mr	r24,r3
 
 	/* turn on 64-bit mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	/* get a valid TOC pointer, wherever we're mapped at */
-	bl	.relative_toc
+	bl	relative_toc
 	tovirt(r2,r2)
 
 #ifdef CONFIG_PPC_BOOK3E
 	/* Book3E initialization */
 	mr	r3,r24
-	bl	.book3e_secondary_thread_init
+	bl	book3e_secondary_thread_init
 #endif
 	b	generic_secondary_common_init
 
@@ -214,17 +212,17 @@ _GLOBAL(generic_secondary_smp_init)
 	mr	r25,r4
 
 	/* turn on 64-bit mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	/* get a valid TOC pointer, wherever we're mapped at */
-	bl	.relative_toc
+	bl	relative_toc
 	tovirt(r2,r2)
 
 #ifdef CONFIG_PPC_BOOK3E
 	/* Book3E initialization */
 	mr	r3,r24
 	mr	r4,r25
-	bl	.book3e_secondary_core_init
+	bl	book3e_secondary_core_init
 #endif
 
 generic_secondary_common_init:
@@ -236,7 +234,7 @@ generic_secondary_common_init:
 	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
 #ifndef CONFIG_SMP
 	addi	r13,r13,PACA_SIZE	/* know r13 if used accidentally */
-	b	.kexec_wait		/* wait for next kernel if !SMP	 */
+	b	kexec_wait		/* wait for next kernel if !SMP	 */
 #else
 	LOAD_REG_ADDR(r7, nr_cpu_ids)	/* Load nr_cpu_ids address       */
 	lwz	r7,0(r7)		/* also the max paca allocated 	 */
@@ -250,7 +248,7 @@ generic_secondary_common_init:
 	blt	1b
 
 	mr	r3,r24			/* not found, copy phys to r3	 */
-	b	.kexec_wait		/* next kernel might do better	 */
+	b	kexec_wait		/* next kernel might do better	 */
 
 2:	SET_PACA(r13)
 #ifdef CONFIG_PPC_BOOK3E
@@ -264,11 +262,13 @@ generic_secondary_common_init:
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_ADDR(r23, cur_cpu_spec)
 	ld	r23,0(r23)
-	ld	r23,CPU_SPEC_RESTORE(r23)
-	cmpdi	0,r23,0
+	ld	r12,CPU_SPEC_RESTORE(r23)
+	cmpdi	0,r12,0
 	beq	3f
-	ld	r23,0(r23)
-	mtctr	r23
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+	ld	r12,0(r12)
+#endif
+	mtctr	r12
 	bctrl
 
 3:	LOAD_REG_ADDR(r3, spinning_secondaries) /* Decrement spinning_secondaries */
@@ -299,7 +299,7 @@ generic_secondary_common_init:
  * Assumes we're mapped EA == RA if the MMU is on.
  */
 #ifdef CONFIG_PPC_BOOK3S
-_STATIC(__mmu_off)
+__mmu_off:
 	mfmsr	r3
 	andi.	r0,r3,MSR_IR|MSR_DR
 	beqlr
@@ -324,12 +324,12 @@ _STATIC(__mmu_off)
  *                 DT block, r4 is a physical pointer to the kernel itself
  *
  */
-_GLOBAL(__start_initialization_multiplatform)
+__start_initialization_multiplatform:
 	/* Make sure we are running in 64 bits mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	/* Get TOC pointer (current runtime address) */
-	bl	.relative_toc
+	bl	relative_toc
 
 	/* find out where we are now */
 	bcl	20,31,$+4
@@ -342,7 +342,7 @@ _GLOBAL(__start_initialization_multiplatform)
 	 */
 	cmpldi	cr0,r5,0
 	beq	1f
-	b	.__boot_from_prom		/* yes -> prom */
+	b	__boot_from_prom		/* yes -> prom */
 1:
 	/* Save parameters */
 	mr	r31,r3
@@ -354,8 +354,8 @@ _GLOBAL(__start_initialization_multiplatform)
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E
-	bl	.start_initialization_book3e
-	b	.__after_prom_start
+	bl	start_initialization_book3e
+	b	__after_prom_start
 #else
 	/* Setup some critical 970 SPRs before switching MMU off */
 	mfspr	r0,SPRN_PVR
@@ -368,15 +368,15 @@ _GLOBAL(__start_initialization_multiplatform)
 	beq	1f
 	cmpwi	r0,0x45		/* 970GX */
 	bne	2f
-1:	bl	.__cpu_preinit_ppc970
+1:	bl	__cpu_preinit_ppc970
 2:
 
 	/* Switch off MMU if not already off */
-	bl	.__mmu_off
-	b	.__after_prom_start
+	bl	__mmu_off
+	b	__after_prom_start
 #endif /* CONFIG_PPC_BOOK3E */
 
-_INIT_STATIC(__boot_from_prom)
+__boot_from_prom:
 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
 	/* Save parameters */
 	mr	r31,r3
@@ -395,7 +395,7 @@ _INIT_STATIC(__boot_from_prom)
 #ifdef CONFIG_RELOCATABLE
 	/* Relocate code for where we are now */
 	mr	r3,r26
-	bl	.relocate
+	bl	relocate
 #endif
 
 	/* Restore parameters */
@@ -407,14 +407,14 @@ _INIT_STATIC(__boot_from_prom)
 
 	/* Do all of the interaction with OF client interface */
 	mr	r8,r26
-	bl	.prom_init
+	bl	prom_init
 #endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */
 
 	/* We never return. We also hit that trap if trying to boot
 	 * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
 	trap
 
-_STATIC(__after_prom_start)
+__after_prom_start:
 #ifdef CONFIG_RELOCATABLE
 	/* process relocations for the final address of the kernel */
 	lis	r25,PAGE_OFFSET@highest	/* compute virtual base of kernel */
@@ -424,7 +424,7 @@ _STATIC(__after_prom_start)
 	bne	1f
 	add	r25,r25,r26
 1:	mr	r3,r25
-	bl	.relocate
+	bl	relocate
 #endif
 
 /*
@@ -464,12 +464,12 @@ _STATIC(__after_prom_start)
 	lis	r5,(copy_to_here - _stext)@ha
 	addi	r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
 
-	bl	.copy_and_flush		/* copy the first n bytes	 */
+	bl	copy_and_flush		/* copy the first n bytes	 */
 					/* this includes the code being	 */
 					/* executed here.		 */
 	addis	r8,r3,(4f - _stext)@ha	/* Jump to the copy of this code */
-	addi	r8,r8,(4f - _stext)@l	/* that we just made */
-	mtctr	r8
+	addi	r12,r8,(4f - _stext)@l	/* that we just made */
+	mtctr	r12
 	bctr
 
 .balign 8
@@ -478,9 +478,9 @@ p_end:	.llong	_end - _stext
 4:	/* Now copy the rest of the kernel up to _end */
 	addis	r5,r26,(p_end - _stext)@ha
 	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
-5:	bl	.copy_and_flush		/* copy the rest */
+5:	bl	copy_and_flush		/* copy the rest */
 
-9:	b	.start_here_multiplatform
+9:	b	start_here_multiplatform
 
 /*
  * Copy routine used to copy the kernel to start at physical address 0
@@ -544,7 +544,7 @@ __secondary_start_pmac_0:
 	
 _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	li	r0,0
 	mfspr	r3,SPRN_HID4
@@ -556,11 +556,11 @@ _GLOBAL(pmac_secondary_start)
 	slbia
 
 	/* get TOC pointer (real address) */
-	bl	.relative_toc
+	bl	relative_toc
 	tovirt(r2,r2)
 
 	/* Copy some CPU settings from CPU 0 */
-	bl	.__restore_cpu_ppc970
+	bl	__restore_cpu_ppc970
 
 	/* pSeries do that early though I don't think we really need it */
 	mfmsr	r3
@@ -619,7 +619,7 @@ __secondary_start:
 	std	r14,PACAKSAVE(r13)
 
 	/* Do early setup for that CPU (stab, slb, hash table pointer) */
-	bl	.early_setup_secondary
+	bl	early_setup_secondary
 
 	/*
 	 * setup the new stack pointer, but *don't* use this until
@@ -639,7 +639,7 @@ __secondary_start:
 	stb	r0,PACAIRQHAPPENED(r13)
 
 	/* enable MMU and jump to start_secondary */
-	LOAD_REG_ADDR(r3, .start_secondary_prolog)
+	LOAD_REG_ADDR(r3, start_secondary_prolog)
 	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
 
 	mtspr	SPRN_SRR0,r3
@@ -652,11 +652,11 @@ __secondary_start:
  * zero the stack back-chain pointer and get the TOC virtual address
  * before going into C code.
  */
-_GLOBAL(start_secondary_prolog)
+start_secondary_prolog:
 	ld	r2,PACATOC(r13)
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
-	bl	.start_secondary
+	bl	start_secondary
 	b	.
 /*
  * Reset stack pointer and call start_secondary
@@ -667,14 +667,14 @@ _GLOBAL(start_secondary_resume)
 	ld	r1,PACAKSAVE(r13)	/* Reload kernel stack pointer */
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
-	bl	.start_secondary
+	bl	start_secondary
 	b	.
 #endif
 
 /*
  * This subroutine clobbers r11 and r12
  */
-_GLOBAL(enable_64b_mode)
+enable_64b_mode:
 	mfmsr	r11			/* grab the current MSR */
 #ifdef CONFIG_PPC_BOOK3E
 	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
@@ -715,9 +715,9 @@ p_toc:	.llong	__toc_start + 0x8000 - 0b
 /*
  * This is where the main kernel code starts.
  */
-_INIT_STATIC(start_here_multiplatform)
+start_here_multiplatform:
 	/* set up the TOC */
-	bl      .relative_toc
+	bl      relative_toc
 	tovirt(r2,r2)
 
 	/* Clear out the BSS. It may have been done in prom_init,
@@ -776,9 +776,9 @@ _INIT_STATIC(start_here_multiplatform)
 
 	/* Restore parameters passed from prom_init/kexec */
 	mr	r3,r31
-	bl	.early_setup		/* also sets r13 and SPRG_PACA */
+	bl	early_setup		/* also sets r13 and SPRG_PACA */
 
-	LOAD_REG_ADDR(r3, .start_here_common)
+	LOAD_REG_ADDR(r3, start_here_common)
 	ld	r4,PACAKMSR(r13)
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -786,7 +786,8 @@ _INIT_STATIC(start_here_multiplatform)
 	b	.	/* prevent speculative execution */
 	
 	/* This is where all platforms converge execution */
-_INIT_GLOBAL(start_here_common)
+
+start_here_common:
 	/* relocation is on at this point */
 	std	r1,PACAKSAVE(r13)
 
@@ -794,7 +795,7 @@ _INIT_GLOBAL(start_here_common)
 	ld	r2,PACATOC(r13)
 
 	/* Do more system initializations in virtual mode */
-	bl	.setup_system
+	bl	setup_system
 
 	/* Mark interrupts soft and hard disabled (they might be enabled
 	 * in the PACA when doing hotplug)
@@ -805,7 +806,7 @@ _INIT_GLOBAL(start_here_common)
 	stb	r0,PACAIRQHAPPENED(r13)
 
 	/* Generic kernel entry */
-	bl	.start_kernel
+	bl	start_kernel
 
 	/* Not reached */
 	BUG_OPCODE
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index b0a1792..0bb5918 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -72,7 +72,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 	 * If so, DABR will be populated in single_step_dabr_instruction().
 	 */
 	if (current->thread.last_hit_ubp != bp)
-		set_breakpoint(info);
+		__set_breakpoint(info);
 
 	return 0;
 }
@@ -198,7 +198,7 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
 
 	info = counter_arch_bp(tsk->thread.last_hit_ubp);
 	regs->msr &= ~MSR_SE;
-	set_breakpoint(info);
+	__set_breakpoint(info);
 	tsk->thread.last_hit_ubp = NULL;
 }
 
@@ -284,7 +284,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
 	if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ))
 		perf_bp_event(bp, regs);
 
-	set_breakpoint(info);
+	__set_breakpoint(info);
 out:
 	rcu_read_unlock();
 	return rc;
@@ -316,7 +316,7 @@ int __kprobes single_step_dabr_instruction(struct die_args *args)
 	if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ))
 		perf_bp_event(bp, regs);
 
-	set_breakpoint(info);
+	__set_breakpoint(info);
 	current->thread.last_hit_ubp = NULL;
 
 	/*
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index bfb73cc..48c21ac 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -43,7 +43,7 @@ _GLOBAL(\name)
 	 */
 #ifdef CONFIG_TRACE_IRQFLAGS
 	stdu    r1,-128(r1)
-	bl	.trace_hardirqs_on
+	bl	trace_hardirqs_on
 	addi    r1,r1,128
 #endif
 	li	r0,1
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index e3edaa1..f57a193 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -46,7 +46,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
 	mflr	r0
 	std	r0,16(r1)
 	stdu    r1,-128(r1)
-	bl	.trace_hardirqs_on
+	bl	trace_hardirqs_on
 	addi    r1,r1,128
 	ld	r0,16(r1)
 	mtlr	r0
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index c3ab869..2480256 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -39,6 +39,10 @@
  * Pass requested state in r3:
  * 	0 - nap
  * 	1 - sleep
+ *
+ * To check IRQ_HAPPENED in r4
+ * 	0 - don't check
+ * 	1 - check
  */
 _GLOBAL(power7_powersave_common)
 	/* Use r3 to pass state nap/sleep/winkle */
@@ -58,7 +62,7 @@ _GLOBAL(power7_powersave_common)
 	/* Make sure FPU, VSX etc... are flushed as we may lose
 	 * state when going to nap mode
 	 */
-	bl	.discard_lazy_cpu_state
+	bl	discard_lazy_cpu_state
 #endif /* CONFIG_SMP */
 
 	/* Hard disable interrupts */
@@ -71,6 +75,8 @@ _GLOBAL(power7_powersave_common)
 	lbz	r0,PACAIRQHAPPENED(r13)
 	cmpwi	cr0,r0,0
 	beq	1f
+	cmpwi	cr0,r4,0
+	beq	1f
 	addi	r1,r1,INT_FRAME_SIZE
 	ld	r0,16(r1)
 	mtlr	r0
@@ -114,15 +120,18 @@ _GLOBAL(power7_idle)
 	lwz	r4,ADDROFF(powersave_nap)(r3)
 	cmpwi	0,r4,0
 	beqlr
+	li	r3, 1
 	/* fall through */
 
 _GLOBAL(power7_nap)
+	mr	r4,r3
 	li	r3,0
 	b	power7_powersave_common
 	/* No return */
 
 _GLOBAL(power7_sleep)
 	li	r3,1
+	li	r4,0
 	b	power7_powersave_common
 	/* No return */
 
@@ -168,7 +177,7 @@ _GLOBAL(power7_wakeup_loss)
 _GLOBAL(power7_wakeup_noloss)
 	lbz	r0,PACA_NAPSTATELOST(r13)
 	cmpwi	r0,0
-	bne	.power7_wakeup_loss
+	bne	power7_wakeup_loss
 	ld	r1,PACAR1(r13)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 40bd7bd..9362588 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -48,6 +48,9 @@ static struct of_device_id legacy_serial_parents[] __initdata = {
 static unsigned int legacy_serial_count;
 static int legacy_serial_console = -1;
 
+static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+	UPF_SHARE_IRQ | UPF_FIXED_PORT;
+
 static unsigned int tsi_serial_in(struct uart_port *p, int offset)
 {
 	unsigned int tmp;
@@ -71,8 +74,9 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 				  phys_addr_t taddr, unsigned long irq,
 				  upf_t flags, int irq_check_parent)
 {
-	const __be32 *clk, *spd;
+	const __be32 *clk, *spd, *rs;
 	u32 clock = BASE_BAUD * 16;
+	u32 shift = 0;
 	int index;
 
 	/* get clock freq. if present */
@@ -83,6 +87,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 	/* get default speed if present */
 	spd = of_get_property(np, "current-speed", NULL);
 
+	/* get register shift if present */
+	rs = of_get_property(np, "reg-shift", NULL);
+	if (rs && *rs)
+		shift = be32_to_cpup(rs);
+
 	/* If we have a location index, then try to use it */
 	if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
 		index = want_index;
@@ -126,6 +135,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 	legacy_serial_ports[index].uartclk = clock;
 	legacy_serial_ports[index].irq = irq;
 	legacy_serial_ports[index].flags = flags;
+	legacy_serial_ports[index].regshift = shift;
 	legacy_serial_infos[index].taddr = taddr;
 	legacy_serial_infos[index].np = of_node_get(np);
 	legacy_serial_infos[index].clock = clock;
@@ -153,8 +163,6 @@ static int __init add_legacy_soc_port(struct device_node *np,
 {
 	u64 addr;
 	const __be32 *addrp;
-	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
-		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
@@ -163,9 +171,8 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	if (of_get_property(np, "clock-frequency", NULL) == NULL)
 		return -1;
 
-	/* if reg-shift or offset, don't try to use it */
-	if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
-		(of_get_property(np, "reg-offset", NULL) != NULL))
+	/* if reg-offset don't try to use it */
+	if ((of_get_property(np, "reg-offset", NULL) != NULL))
 		return -1;
 
 	/* if rtas uses this device, don't try to use it as well */
@@ -185,9 +192,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	 * IO port value. It will be fixed up later along with the irq
 	 */
 	if (tsi && !strcmp(tsi->type, "tsi-bridge"))
-		return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+		return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
+				       NO_IRQ, legacy_port_flags, 0);
 	else
-		return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+		return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
+				       NO_IRQ, legacy_port_flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -233,7 +242,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 
 	/* Add port, irq will be dealt with later */
 	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
-			       taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0);
+			       taddr, NO_IRQ, legacy_port_flags, 0);
 
 }
 
@@ -306,7 +315,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	 * IO port value. It will be fixed up later along with the irq
 	 */
 	return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
-			       UPF_BOOT_AUTOCONF, np != pci_dev);
+			       legacy_port_flags, np != pci_dev);
 }
 #endif
 
@@ -315,17 +324,20 @@ static void __init setup_legacy_serial_console(int console)
 	struct legacy_serial_info *info = &legacy_serial_infos[console];
 	struct plat_serial8250_port *port = &legacy_serial_ports[console];
 	void __iomem *addr;
+	unsigned int stride;
+
+	stride = 1 << port->regshift;
 
 	/* Check if a translated MMIO address has been found */
 	if (info->taddr) {
 		addr = ioremap(info->taddr, 0x1000);
 		if (addr == NULL)
 			return;
-		udbg_uart_init_mmio(addr, 1);
+		udbg_uart_init_mmio(addr, stride);
 	} else {
 		/* Check if it's PIO and we support untranslated PIO */
 		if (port->iotype == UPIO_PORT && isa_io_special)
-			udbg_uart_init_pio(port->iobase, 1);
+			udbg_uart_init_pio(port->iobase, stride);
 		else
 			return;
 	}
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 3d02495..4e314b9 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -34,7 +34,7 @@ _GLOBAL(call_do_softirq)
 	std	r0,16(r1)
 	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
 	mr	r1,r3
-	bl	.__do_softirq
+	bl	__do_softirq
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0
@@ -45,7 +45,7 @@ _GLOBAL(call_do_irq)
 	std	r0,16(r1)
 	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
 	mr	r1,r4
-	bl	.__do_irq
+	bl	__do_irq
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0
@@ -506,7 +506,7 @@ _GLOBAL(kexec_smp_wait)
 	stb	r4,PACAKEXECSTATE(r13)
 	SYNC
 
-	b	.kexec_wait
+	b	kexec_wait
 
 /*
  * switch to real mode (turn mmu off)
@@ -576,7 +576,7 @@ _GLOBAL(kexec_sequence)
 
 	/* copy dest pages, flush whole dest image */
 	mr	r3,r29
-	bl	.kexec_copy_flush	/* (image) */
+	bl	kexec_copy_flush	/* (image) */
 
 	/* turn off mmu */
 	bl	real_mode
@@ -586,7 +586,7 @@ _GLOBAL(kexec_sequence)
 	mr	r4,r30		/* start, aka phys mem offset */
 	li	r5,0x100
 	li	r6,0
-	bl	.copy_and_flush	/* (dest, src, copy limit, start offset) */
+	bl	copy_and_flush	/* (dest, src, copy limit, start offset) */
 1:	/* assume normal blr return */
 
 	/* release other cpus to the new kernel secondary start at 0x60 */
@@ -595,8 +595,12 @@ _GLOBAL(kexec_sequence)
 	stw	r6,kexec_flag-1b(5)
 
 	/* clear out hardware hash page table and tlb */
-	ld	r5,0(r27)		/* deref function descriptor */
-	mtctr	r5
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+	ld	r12,0(r27)		/* deref function descriptor */
+#else
+	mr	r12,r27
+#endif
+	mtctr	r12
 	bctrl				/* ppc_md.hpte_clear_all(void); */
 
 /*
@@ -630,3 +634,31 @@ _GLOBAL(kexec_sequence)
 	li	r5,0
 	blr	/* image->start(physid, image->start, 0); */
 #endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_MODULES
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+
+#ifdef CONFIG_MODVERSIONS
+.weak __crc_TOC.
+.section "___kcrctab+TOC.","a"
+.globl __kcrctab_TOC.
+__kcrctab_TOC.:
+	.llong	__crc_TOC.
+#endif
+
+/*
+ * Export a fake .TOC. since both modpost and depmod will complain otherwise.
+ * Both modpost and depmod strip the leading . so we do the same here.
+ */
+.section "__ksymtab_strings","a"
+__kstrtab_TOC.:
+	.asciz "TOC."
+
+.section "___ksymtab+TOC.","a"
+/* This symbol name is important: it's used by modpost to find exported syms */
+.globl __ksymtab_TOC.
+__ksymtab_TOC.:
+	.llong 0 /* .value */
+	.llong __kstrtab_TOC.
+#endif /* ELFv2 */
+#endif /* MODULES */
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 12664c1..077d2ce 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/ftrace.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 #include <asm/module.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
@@ -41,46 +42,170 @@
 #define DEBUGP(fmt , ...)
 #endif
 
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define R2_STACK_OFFSET 24
+
+/* An address is simply the address of the function. */
+typedef unsigned long func_desc_t;
+
+static func_desc_t func_desc(unsigned long addr)
+{
+	return addr;
+}
+static unsigned long func_addr(unsigned long addr)
+{
+	return addr;
+}
+static unsigned long stub_func_addr(func_desc_t func)
+{
+	return func;
+}
+
+/* PowerPC64 specific values for the Elf64_Sym st_other field.  */
+#define STO_PPC64_LOCAL_BIT	5
+#define STO_PPC64_LOCAL_MASK	(7 << STO_PPC64_LOCAL_BIT)
+#define PPC64_LOCAL_ENTRY_OFFSET(other)					\
+ (((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2)
+
+static unsigned int local_entry_offset(const Elf64_Sym *sym)
+{
+	/* sym->st_other indicates offset to local entry point
+	 * (otherwise it will assume r12 is the address of the start
+	 * of function and try to derive r2 from it). */
+	return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other);
+}
+#else
+#define R2_STACK_OFFSET 40
+
+/* An address is address of the OPD entry, which contains address of fn. */
+typedef struct ppc64_opd_entry func_desc_t;
+
+static func_desc_t func_desc(unsigned long addr)
+{
+	return *(struct ppc64_opd_entry *)addr;
+}
+static unsigned long func_addr(unsigned long addr)
+{
+	return func_desc(addr).funcaddr;
+}
+static unsigned long stub_func_addr(func_desc_t func)
+{
+	return func.funcaddr;
+}
+static unsigned int local_entry_offset(const Elf64_Sym *sym)
+{
+	return 0;
+}
+#endif
+
 /* Like PPC32, we need little trampolines to do > 24-bit jumps (into
    the kernel itself).  But on PPC64, these need to be used for every
    jump, actually, to reset r2 (TOC+0x8000). */
 struct ppc64_stub_entry
 {
-	/* 28 byte jump instruction sequence (7 instructions) */
-	unsigned char jump[28];
-	unsigned char unused[4];
+	/* 28 byte jump instruction sequence (7 instructions). We only
+	 * need 6 instructions on ABIv2 but we always allocate 7 so
+	 * so we don't have to modify the trampoline load instruction. */
+	u32 jump[7];
+	u32 unused;
 	/* Data for the above code */
-	struct ppc64_opd_entry opd;
+	func_desc_t funcdata;
 };
 
-/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external)
-   function which may be more than 24-bits away.  We could simply
-   patch the new r2 value and function pointer into the stub, but it's
-   significantly shorter to put these values at the end of the stub
-   code, and patch the stub address (32-bits relative to the TOC ptr,
-   r2) into the stub. */
-static struct ppc64_stub_entry ppc64_stub =
-{ .jump = {
-#ifdef __LITTLE_ENDIAN__
-	0x00, 0x00, 0x82, 0x3d, /* addis   r12,r2, <high> */
-	0x00, 0x00, 0x8c, 0x39, /* addi    r12,r12, <low> */
-	/* Save current r2 value in magic place on the stack. */
-	0x28, 0x00, 0x41, 0xf8, /* std     r2,40(r1) */
-	0x20, 0x00, 0x6c, 0xe9, /* ld      r11,32(r12) */
-	0x28, 0x00, 0x4c, 0xe8, /* ld      r2,40(r12) */
-	0xa6, 0x03, 0x69, 0x7d, /* mtctr   r11 */
-	0x20, 0x04, 0x80, 0x4e  /* bctr */
-#else
-	0x3d, 0x82, 0x00, 0x00, /* addis   r12,r2, <high> */
-	0x39, 0x8c, 0x00, 0x00, /* addi    r12,r12, <low> */
+/*
+ * PPC64 uses 24 bit jumps, but we need to jump into other modules or
+ * the kernel which may be further.  So we jump to a stub.
+ *
+ * For ELFv1 we need to use this to set up the new r2 value (aka TOC
+ * pointer).  For ELFv2 it's the callee's responsibility to set up the
+ * new r2, but for both we need to save the old r2.
+ *
+ * We could simply patch the new r2 value and function pointer into
+ * the stub, but it's significantly shorter to put these values at the
+ * end of the stub code, and patch the stub address (32-bits relative
+ * to the TOC ptr, r2) into the stub.
+ */
+
+static u32 ppc64_stub_insns[] = {
+	0x3d620000,			/* addis   r11,r2, <high> */
+	0x396b0000,			/* addi    r11,r11, <low> */
 	/* Save current r2 value in magic place on the stack. */
-	0xf8, 0x41, 0x00, 0x28, /* std     r2,40(r1) */
-	0xe9, 0x6c, 0x00, 0x20, /* ld      r11,32(r12) */
-	0xe8, 0x4c, 0x00, 0x28, /* ld      r2,40(r12) */
-	0x7d, 0x69, 0x03, 0xa6, /* mtctr   r11 */
-	0x4e, 0x80, 0x04, 0x20  /* bctr */
+	0xf8410000|R2_STACK_OFFSET,	/* std     r2,R2_STACK_OFFSET(r1) */
+	0xe98b0020,			/* ld      r12,32(r11) */
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+	/* Set up new r2 from function descriptor */
+	0xe84b0028,			/* ld      r2,40(r11) */
+#endif
+	0x7d8903a6,			/* mtctr   r12 */
+	0x4e800420			/* bctr */
+};
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+static u32 ppc64_stub_mask[] = {
+	0xffff0000,
+	0xffff0000,
+	0xffffffff,
+	0xffffffff,
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+	0xffffffff,
+#endif
+	0xffffffff,
+	0xffffffff
+};
+
+bool is_module_trampoline(u32 *p)
+{
+	unsigned int i;
+	u32 insns[ARRAY_SIZE(ppc64_stub_insns)];
+
+	BUILD_BUG_ON(sizeof(ppc64_stub_insns) != sizeof(ppc64_stub_mask));
+
+	if (probe_kernel_read(insns, p, sizeof(insns)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(ppc64_stub_insns); i++) {
+		u32 insna = insns[i];
+		u32 insnb = ppc64_stub_insns[i];
+		u32 mask = ppc64_stub_mask[i];
+
+		if ((insna & mask) != (insnb & mask))
+			return false;
+	}
+
+	return true;
+}
+
+int module_trampoline_target(struct module *mod, u32 *trampoline,
+			     unsigned long *target)
+{
+	u32 buf[2];
+	u16 upper, lower;
+	long offset;
+	void *toc_entry;
+
+	if (probe_kernel_read(buf, trampoline, sizeof(buf)))
+		return -EFAULT;
+
+	upper = buf[0] & 0xffff;
+	lower = buf[1] & 0xffff;
+
+	/* perform the addis/addi, both signed */
+	offset = ((short)upper << 16) + (short)lower;
+
+	/*
+	 * Now get the address this trampoline jumps to. This
+	 * is always 32 bytes into our trampoline stub.
+	 */
+	toc_entry = (void *)mod->arch.toc + offset + 32;
+
+	if (probe_kernel_read(target, toc_entry, sizeof(*target)))
+		return -EFAULT;
+
+	return 0;
+}
+
 #endif
-} };
 
 /* Count how many different 24-bit relocations (different symbol,
    different addend) */
@@ -183,6 +308,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
 	return relocs * sizeof(struct ppc64_stub_entry);
 }
 
+/* Still needed for ELFv2, for .TOC. */
 static void dedotify_versions(struct modversion_info *vers,
 			      unsigned long size)
 {
@@ -193,7 +319,7 @@ static void dedotify_versions(struct modversion_info *vers,
 			memmove(vers->name, vers->name+1, strlen(vers->name));
 }
 
-/* Undefined symbols which refer to .funcname, hack to funcname */
+/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */
 static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 {
 	unsigned int i;
@@ -207,6 +333,24 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 	}
 }
 
+static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
+			       const char *strtab,
+			       unsigned int symindex)
+{
+	unsigned int i, numsyms;
+	Elf64_Sym *syms;
+
+	syms = (Elf64_Sym *)sechdrs[symindex].sh_addr;
+	numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
+
+	for (i = 1; i < numsyms; i++) {
+		if (syms[i].st_shndx == SHN_UNDEF
+		    && strcmp(strtab + syms[i].st_name, "TOC.") == 0)
+			return &syms[i];
+	}
+	return NULL;
+}
+
 int module_frob_arch_sections(Elf64_Ehdr *hdr,
 			      Elf64_Shdr *sechdrs,
 			      char *secstrings,
@@ -271,21 +415,12 @@ static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me)
 /* Patch stub to reference function and correct r2 value. */
 static inline int create_stub(Elf64_Shdr *sechdrs,
 			      struct ppc64_stub_entry *entry,
-			      struct ppc64_opd_entry *opd,
+			      unsigned long addr,
 			      struct module *me)
 {
-	Elf64_Half *loc1, *loc2;
 	long reladdr;
 
-	*entry = ppc64_stub;
-
-#ifdef __LITTLE_ENDIAN__
-	loc1 = (Elf64_Half *)&entry->jump[0];
-	loc2 = (Elf64_Half *)&entry->jump[4];
-#else
-	loc1 = (Elf64_Half *)&entry->jump[2];
-	loc2 = (Elf64_Half *)&entry->jump[6];
-#endif
+	memcpy(entry->jump, ppc64_stub_insns, sizeof(ppc64_stub_insns));
 
 	/* Stub uses address relative to r2. */
 	reladdr = (unsigned long)entry - my_r2(sechdrs, me);
@@ -296,35 +431,33 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
 	}
 	DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr);
 
-	*loc1 = PPC_HA(reladdr);
-	*loc2 = PPC_LO(reladdr);
-	entry->opd.funcaddr = opd->funcaddr;
-	entry->opd.r2 = opd->r2;
+	entry->jump[0] |= PPC_HA(reladdr);
+	entry->jump[1] |= PPC_LO(reladdr);
+	entry->funcdata = func_desc(addr);
 	return 1;
 }
 
-/* Create stub to jump to function described in this OPD: we need the
+/* Create stub to jump to function described in this OPD/ptr: we need the
    stub to set up the TOC ptr (r2) for the function. */
 static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
-				   unsigned long opdaddr,
+				   unsigned long addr,
 				   struct module *me)
 {
 	struct ppc64_stub_entry *stubs;
-	struct ppc64_opd_entry *opd = (void *)opdaddr;
 	unsigned int i, num_stubs;
 
 	num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs);
 
 	/* Find this stub, or if that fails, the next avail. entry */
 	stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr;
-	for (i = 0; stubs[i].opd.funcaddr; i++) {
+	for (i = 0; stub_func_addr(stubs[i].funcdata); i++) {
 		BUG_ON(i >= num_stubs);
 
-		if (stubs[i].opd.funcaddr == opd->funcaddr)
+		if (stub_func_addr(stubs[i].funcdata) == func_addr(addr))
 			return (unsigned long)&stubs[i];
 	}
 
-	if (!create_stub(sechdrs, &stubs[i], opd, me))
+	if (!create_stub(sechdrs, &stubs[i], addr, me))
 		return 0;
 
 	return (unsigned long)&stubs[i];
@@ -339,7 +472,8 @@ static int restore_r2(u32 *instruction, struct module *me)
 		       me->name, *instruction);
 		return 0;
 	}
-	*instruction = 0xe8410028;	/* ld r2,40(r1) */
+	/* ld r2,R2_STACK_OFFSET(r1) */
+	*instruction = 0xe8410000 | R2_STACK_OFFSET;
 	return 1;
 }
 
@@ -357,6 +491,17 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
 	       sechdrs[relsec].sh_info);
+
+	/* First time we're called, we can fix up .TOC. */
+	if (!me->arch.toc_fixed) {
+		sym = find_dot_toc(sechdrs, strtab, symindex);
+		/* It's theoretically possible that a module doesn't want a
+		 * .TOC. so don't fail it just for that. */
+		if (sym)
+			sym->st_value = my_r2(sechdrs, me);
+		me->arch.toc_fixed = true;
+	}
+
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
 		/* This is where to make the change */
 		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -453,7 +598,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 					return -ENOENT;
 				if (!restore_r2((u32 *)location + 1, me))
 					return -ENOEXEC;
-			}
+			} else
+				value += local_entry_offset(sym);
 
 			/* Convert value to relative */
 			value -= (unsigned long)location;
@@ -474,6 +620,31 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			*location = value - (unsigned long)location;
 			break;
 
+		case R_PPC64_TOCSAVE:
+			/*
+			 * Marker reloc indicates we don't have to save r2.
+			 * That would only save us one instruction, so ignore
+			 * it.
+			 */
+			break;
+
+		case R_PPC64_REL16_HA:
+			/* Subtract location pointer */
+			value -= (unsigned long)location;
+			value = ((value + 0x8000) >> 16);
+			*((uint16_t *) location)
+				= (*((uint16_t *) location) & ~0xffff)
+				| (value & 0xffff);
+			break;
+
+		case R_PPC64_REL16_LO:
+			/* Subtract location pointer */
+			value -= (unsigned long)location;
+			*((uint16_t *) location)
+				= (*((uint16_t *) location) & ~0xffff)
+				| (value & 0xffff);
+			break;
+
 		default:
 			printk("%s: Unknown ADD relocation: %lu\n",
 			       me->name,
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 24d342e..b49c72f 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -120,6 +121,25 @@ resource_size_t pcibios_window_alignment(struct pci_bus *bus,
 	return 1;
 }
 
+void pcibios_reset_secondary_bus(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	if (ppc_md.pcibios_reset_secondary_bus) {
+		ppc_md.pcibios_reset_secondary_bus(dev);
+		return;
+	}
+
+	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(2);
+
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+	ssleep(1);
+}
+
 static resource_size_t pcibios_io_size(const struct pci_controller *hose)
 {
 #ifdef CONFIG_PPC64
@@ -646,60 +666,36 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				  struct device_node *dev, int primary)
 {
-	const __be32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
 	int memno = 0;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
 	struct resource *res;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
 
 	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
 	       dev->full_name, primary ? "(primary)" : "");
 
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
+	/* Check for ranges property */
+	if (of_pci_range_parser_init(&parser, dev))
 		return;
 
 	/* Parse it */
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = of_read_number(ranges, 1);
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-
+	for_each_of_pci_range(&parser, &range) {
 		/* If we failed translation or got a zero-sized region
 		 * (some FW try to feed us with non sensical zero sized regions
 		 * such as power3 which look like some kind of attempt at exposing
 		 * the VGA memory hole)
 		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
+		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
 			continue;
 
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (of_read_number(ranges, 1) != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
 		/* Act based on address space type */
 		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
 			printk(KERN_INFO
 			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
+			       range.cpu_addr, range.cpu_addr + range.size - 1,
+			       range.pci_addr);
 
 			/* We support only one IO range */
 			if (hose->pci_io_size) {
@@ -709,11 +705,12 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			}
 #ifdef CONFIG_PPC32
 			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
+			if (range.size > 0x01000000)
+				range.size = 0x01000000;
 
 			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
+			hose->io_base_virt = ioremap(range.cpu_addr,
+						range.size);
 
 			/* Expect trouble if pci_addr is not 0 */
 			if (primary)
@@ -723,20 +720,20 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			/* pci_io_size and io_base_phys always represent IO
 			 * space starting at 0 so we factor in pci_addr
 			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
+			hose->pci_io_size = range.pci_addr + range.size;
+			hose->io_base_phys = range.cpu_addr - range.pci_addr;
 
 			/* Build resource */
 			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
+			range.cpu_addr = range.pci_addr;
 			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+		case IORESOURCE_MEM:
 			printk(KERN_INFO
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
+			       range.cpu_addr, range.cpu_addr + range.size - 1,
+			       range.pci_addr,
+			       (range.pci_space & 0x40000000) ?
+			       "Prefetch" : "");
 
 			/* We support only 3 memory ranges */
 			if (memno >= 3) {
@@ -745,28 +742,21 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				continue;
 			}
 			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
+			if (range.pci_addr == 0) {
 				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
+					isa_mem_base = range.cpu_addr;
+				hose->isa_mem_phys = range.cpu_addr;
+				hose->isa_mem_size = range.size;
 			}
 
 			/* Build resource */
-			hose->mem_offset[memno] = cpu_addr - pci_addr;
+			hose->mem_offset[memno] = range.cpu_addr -
+							range.pci_addr;
 			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
 			break;
 		}
 		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
+			of_pci_range_to_resource(&range, dev, res);
 		}
 	}
 }
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 059e244..44562aa 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -304,6 +304,9 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
 	struct pci_dev *dev = NULL;
 	const __be32 *reg;
 	int reglen, devfn;
+#ifdef CONFIG_EEH
+	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+#endif
 
 	pr_debug("  * %s\n", dn->full_name);
 	if (!of_device_is_available(dn))
@@ -321,6 +324,12 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
 		return dev;
 	}
 
+	/* Device removed permanently ? */
+#ifdef CONFIG_EEH
+	if (edev && (edev->mode & EEH_DEV_REMOVED))
+		return NULL;
+#endif
+
 	/* create a new pci_dev for this device */
 	dev = of_create_pci_dev(dn, bus, devfn);
 	if (!dev)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 450850a..48d17d6f 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -155,9 +155,7 @@ EXPORT_SYMBOL(__cmpdi2);
 #endif
 long long __bswapdi2(long long);
 EXPORT_SYMBOL(__bswapdi2);
-#ifdef __BIG_ENDIAN__
 EXPORT_SYMBOL(memcpy);
-#endif
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memcmp);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 31d0215..8a1edbe 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -54,6 +54,7 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <asm/code-patching.h>
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
 
@@ -495,14 +496,21 @@ static inline int set_dawr(struct arch_hw_breakpoint *brk)
 	return 0;
 }
 
-int set_breakpoint(struct arch_hw_breakpoint *brk)
+void __set_breakpoint(struct arch_hw_breakpoint *brk)
 {
 	__get_cpu_var(current_brk) = *brk;
 
 	if (cpu_has_feature(CPU_FTR_DAWR))
-		return set_dawr(brk);
+		set_dawr(brk);
+	else
+		set_dabr(brk);
+}
 
-	return set_dabr(brk);
+void set_breakpoint(struct arch_hw_breakpoint *brk)
+{
+	preempt_disable();
+	__set_breakpoint(brk);
+	preempt_enable();
 }
 
 #ifdef CONFIG_PPC64
@@ -834,7 +842,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
  */
 #ifndef CONFIG_HAVE_HW_BREAKPOINT
 	if (unlikely(!hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk)))
-		set_breakpoint(&new->thread.hw_brk);
+		__set_breakpoint(&new->thread.hw_brk);
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 
@@ -1108,7 +1116,9 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		struct thread_info *ti = (void *)task_stack_page(p);
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->gpr[1] = sp + sizeof(struct pt_regs);
-		childregs->gpr[14] = usp;	/* function */
+		/* function */
+		if (usp)
+			childregs->gpr[14] = ppc_function_entry((void *)usp);
 #ifdef CONFIG_PPC64
 		clear_tsk_thread_flag(p, TIF_32BIT);
 		childregs->softe = 1;
@@ -1187,17 +1197,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	if (cpu_has_feature(CPU_FTR_HAS_PPR))
 		p->thread.ppr = INIT_PPR;
 #endif
-	/*
-	 * The PPC64 ABI makes use of a TOC to contain function 
-	 * pointers.  The function (ret_from_except) is actually a pointer
-	 * to the TOC entry.  The first entry is a pointer to the actual
-	 * function.
-	 */
-#ifdef CONFIG_PPC64
-	kregs->nip = *((unsigned long *)f);
-#else
-	kregs->nip = (unsigned long)f;
-#endif
+	kregs->nip = ppc_function_entry(f);
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index b0c263d..77aa1e9 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -23,7 +23,7 @@ strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
 reloc_got2 kernstart_addr memstart_addr linux_banner _stext
 opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
 boot_command_line __prom_init_toc_start __prom_init_toc_end
-btext_setup_display"
+btext_setup_display TOC."
 
 NM="$1"
 OBJ="$2"
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 7d4c717..c168337 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -80,10 +80,6 @@ int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 	if (ret)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (returnval == EEH_IO_ERROR_VALUE(size) &&
-	    eeh_dev_check_failure(of_node_to_eeh_dev(pdn->node)))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return PCIBIOS_SUCCESSFUL;
 }
 
@@ -92,18 +88,39 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 				int where, int size, u32 *val)
 {
 	struct device_node *busdn, *dn;
-
-	busdn = pci_bus_to_OF_node(bus);
+	struct pci_dn *pdn;
+	bool found = false;
+#ifdef CONFIG_EEH
+	struct eeh_dev *edev;
+#endif
+	int ret;
 
 	/* Search only direct children of the bus */
+	*val = 0xFFFFFFFF;
+	busdn = pci_bus_to_OF_node(bus);
 	for (dn = busdn->child; dn; dn = dn->sibling) {
-		struct pci_dn *pdn = PCI_DN(dn);
+		pdn = PCI_DN(dn);
 		if (pdn && pdn->devfn == devfn
-		    && of_device_is_available(dn))
-			return rtas_read_config(pdn, where, size, val);
+		    && of_device_is_available(dn)) {
+			found = true;
+			break;
+		}
 	}
 
-	return PCIBIOS_DEVICE_NOT_FOUND;
+	if (!found)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+#ifdef CONFIG_EEH
+	edev = of_node_to_eeh_dev(dn);
+	if (edev && edev->pe && edev->pe->state & EEH_PE_RESET)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+
+	ret = rtas_read_config(pdn, where, size, val);
+	if (*val == EEH_IO_ERROR_VALUE(size) &&
+	    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return ret;
 }
 
 int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val)
@@ -136,17 +153,34 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 				 int where, int size, u32 val)
 {
 	struct device_node *busdn, *dn;
-
-	busdn = pci_bus_to_OF_node(bus);
+	struct pci_dn *pdn;
+	bool found = false;
+#ifdef CONFIG_EEH
+	struct eeh_dev *edev;
+#endif
+	int ret;
 
 	/* Search only direct children of the bus */
+	busdn = pci_bus_to_OF_node(bus);
 	for (dn = busdn->child; dn; dn = dn->sibling) {
-		struct pci_dn *pdn = PCI_DN(dn);
+		pdn = PCI_DN(dn);
 		if (pdn && pdn->devfn == devfn
-		    && of_device_is_available(dn))
-			return rtas_write_config(pdn, where, size, val);
+		    && of_device_is_available(dn)) {
+			found = true;
+			break;
+		}
 	}
-	return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (!found)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+#ifdef CONFIG_EEH
+	edev = of_node_to_eeh_dev(dn);
+	if (edev && edev->pe && (edev->pe->state & EEH_PE_RESET))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+	ret = rtas_write_config(pdn, where, size, val);
+
+	return ret;
 }
 
 static struct pci_ops rtas_pci_ops = {
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 79b7612..aa0f5ed 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -212,6 +212,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	unsigned long cpu_id = (unsigned long)v - 1;
 	unsigned int pvr;
+	unsigned long proc_freq;
 	unsigned short maj;
 	unsigned short min;
 
@@ -263,12 +264,19 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #endif /* CONFIG_TAU */
 
 	/*
-	 * Assume here that all clock rates are the same in a
-	 * smp system.  -- Cort
+	 * Platforms that have variable clock rates, should implement
+	 * the method ppc_md.get_proc_freq() that reports the clock
+	 * rate of a given cpu. The rest can use ppc_proc_freq to
+	 * report the clock rate that is same across all cpus.
 	 */
-	if (ppc_proc_freq)
+	if (ppc_md.get_proc_freq)
+		proc_freq = ppc_md.get_proc_freq(cpu_id);
+	else
+		proc_freq = ppc_proc_freq;
+
+	if (proc_freq)
 		seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
-			   ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
+			   proc_freq / 1000000, proc_freq % 1000000);
 
 	if (ppc_md.show_percpuinfo != NULL)
 		ppc_md.show_percpuinfo(m, cpu_id);
@@ -382,9 +390,10 @@ void __init check_for_initrd(void)
 
 #ifdef CONFIG_SMP
 
-int threads_per_core, threads_shift;
+int threads_per_core, threads_per_subcore, threads_shift;
 cpumask_t threads_core_mask;
 EXPORT_SYMBOL_GPL(threads_per_core);
+EXPORT_SYMBOL_GPL(threads_per_subcore);
 EXPORT_SYMBOL_GPL(threads_shift);
 EXPORT_SYMBOL_GPL(threads_core_mask);
 
@@ -393,6 +402,7 @@ static void __init cpu_init_thread_core_maps(int tpc)
 	int i;
 
 	threads_per_core = tpc;
+	threads_per_subcore = tpc;
 	cpumask_clear(&threads_core_mask);
 
 	/* This implementation only supports power of 2 number of threads
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fbe2437..ee082d7 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -36,6 +36,7 @@
 #include <linux/lockdep.h>
 #include <linux/memblock.h>
 #include <linux/hugetlb.h>
+#include <linux/memory.h>
 
 #include <asm/io.h>
 #include <asm/kdump.h>
@@ -341,7 +342,7 @@ void smp_release_cpus(void)
 
 	ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
 			- PHYSICAL_START);
-	*ptr = __pa(generic_secondary_smp_init);
+	*ptr = ppc_function_entry(generic_secondary_smp_init);
 
 	/* And wait a bit for them to catch up */
 	for (i = 0; i < 100000; i++) {
@@ -780,6 +781,15 @@ void __init setup_per_cpu_areas(void)
 }
 #endif
 
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+unsigned long memory_block_size_bytes(void)
+{
+	if (ppc_md.memory_block_size)
+		return ppc_md.memory_block_size();
+
+	return MIN_MEMORY_BLOCK_SIZE;
+}
+#endif
 
 #if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
 struct ppc_pci_io ppc_pci_io;
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 8fc4177..1c794ce 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -134,7 +134,7 @@ static int do_signal(struct pt_regs *regs)
 	 */
 	if (current->thread.hw_brk.address &&
 		current->thread.hw_brk.type)
-		set_breakpoint(&current->thread.hw_brk);
+		__set_breakpoint(&current->thread.hw_brk);
 #endif
 	/* Re-enable the breakpoints for the signal stack */
 	thread_change_pc(current, regs);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 10ffffe..7753af2 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -36,6 +36,7 @@
 #include <linux/atomic.h>
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
+#include <asm/kvm_ppc.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
@@ -390,6 +391,7 @@ void smp_prepare_boot_cpu(void)
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
+	set_numa_node(numa_cpu_lookup_table[boot_cpuid]);
 	current_set[boot_cpuid] = task_thread_info(current);
 }
 
@@ -457,38 +459,9 @@ int generic_check_cpu_restart(unsigned int cpu)
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
 }
 
-static atomic_t secondary_inhibit_count;
-
-/*
- * Don't allow secondary CPU threads to come online
- */
-void inhibit_secondary_onlining(void)
+static bool secondaries_inhibited(void)
 {
-	/*
-	 * This makes secondary_inhibit_count stable during cpu
-	 * online/offline operations.
-	 */
-	get_online_cpus();
-
-	atomic_inc(&secondary_inhibit_count);
-	put_online_cpus();
-}
-EXPORT_SYMBOL_GPL(inhibit_secondary_onlining);
-
-/*
- * Allow secondary CPU threads to come online again
- */
-void uninhibit_secondary_onlining(void)
-{
-	get_online_cpus();
-	atomic_dec(&secondary_inhibit_count);
-	put_online_cpus();
-}
-EXPORT_SYMBOL_GPL(uninhibit_secondary_onlining);
-
-static int secondaries_inhibited(void)
-{
-	return atomic_read(&secondary_inhibit_count);
+	return kvm_hv_mode_active();
 }
 
 #else /* HOTPLUG_CPU */
@@ -517,7 +490,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * Don't allow secondary threads to come online if inhibited
 	 */
 	if (threads_per_core > 1 && secondaries_inhibited() &&
-	    cpu % threads_per_core != 0)
+	    cpu_thread_in_subcore(cpu))
 		return -EBUSY;
 
 	if (smp_ops == NULL ||
@@ -750,6 +723,12 @@ void start_secondary(void *unused)
 	}
 	traverse_core_siblings(cpu, true);
 
+	/*
+	 * numa_node_id() works after this.
+	 */
+	set_numa_node(numa_cpu_lookup_table[cpu]);
+	set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
 	smp_wmb();
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index d90d4b7..67fd2fd 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -404,7 +404,7 @@ void ppc_enable_pmcs(void)
 }
 EXPORT_SYMBOL(ppc_enable_pmcs);
 
-#define __SYSFS_SPRSETUP(NAME, ADDRESS, EXTRA) \
+#define __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, EXTRA) \
 static void read_##NAME(void *val) \
 { \
 	*(unsigned long *)val = mfspr(ADDRESS);	\
@@ -413,7 +413,9 @@ static void write_##NAME(void *val) \
 { \
 	EXTRA; \
 	mtspr(ADDRESS, *(unsigned long *)val);	\
-} \
+}
+
+#define __SYSFS_SPRSETUP_SHOW_STORE(NAME) \
 static ssize_t show_##NAME(struct device *dev, \
 			struct device_attribute *attr, \
 			char *buf) \
@@ -436,10 +438,15 @@ static ssize_t __used \
 	return count; \
 }
 
-#define SYSFS_PMCSETUP(NAME, ADDRESS)	\
-	__SYSFS_SPRSETUP(NAME, ADDRESS, ppc_enable_pmcs())
-#define SYSFS_SPRSETUP(NAME, ADDRESS)	\
-	__SYSFS_SPRSETUP(NAME, ADDRESS, )
+#define SYSFS_PMCSETUP(NAME, ADDRESS) \
+	__SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ppc_enable_pmcs()) \
+	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
+#define SYSFS_SPRSETUP(NAME, ADDRESS) \
+	__SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ) \
+	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
+
+#define SYSFS_SPRSETUP_SHOW_STORE(NAME) \
+	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
 
 /* Let's define all possible registers, we'll only hook up the ones
  * that are implemented on the current processor
@@ -477,7 +484,6 @@ SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
 SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
 SYSFS_SPRSETUP(purr, SPRN_PURR);
 SYSFS_SPRSETUP(spurr, SPRN_SPURR);
-SYSFS_SPRSETUP(dscr, SPRN_DSCR);
 SYSFS_SPRSETUP(pir, SPRN_PIR);
 
 /*
@@ -487,12 +493,27 @@ SYSFS_SPRSETUP(pir, SPRN_PIR);
 */
 static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
 static DEVICE_ATTR(spurr, 0400, show_spurr, NULL);
-static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
 static DEVICE_ATTR(purr, 0400, show_purr, store_purr);
 static DEVICE_ATTR(pir, 0400, show_pir, NULL);
 
-unsigned long dscr_default = 0;
-EXPORT_SYMBOL(dscr_default);
+static unsigned long dscr_default;
+
+static void read_dscr(void *val)
+{
+	*(unsigned long *)val = get_paca()->dscr_default;
+}
+
+static void write_dscr(void *val)
+{
+	get_paca()->dscr_default = *(unsigned long *)val;
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = *(unsigned long *)val;
+		mtspr(SPRN_DSCR, *(unsigned long *)val);
+	}
+}
+
+SYSFS_SPRSETUP_SHOW_STORE(dscr);
+static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
 
 static void add_write_permission_dev_attr(struct device_attribute *attr)
 {
@@ -505,14 +526,6 @@ static ssize_t show_dscr_default(struct device *dev,
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
-static void update_dscr(void *dummy)
-{
-	if (!current->thread.dscr_inherit) {
-		current->thread.dscr = dscr_default;
-		mtspr(SPRN_DSCR, dscr_default);
-	}
-}
-
 static ssize_t __used store_dscr_default(struct device *dev,
 		struct device_attribute *attr, const char *buf,
 		size_t count)
@@ -525,7 +538,7 @@ static ssize_t __used store_dscr_default(struct device *dev,
 		return -EINVAL;
 	dscr_default = val;
 
-	on_each_cpu(update_dscr, NULL, 1);
+	on_each_cpu(write_dscr, &val, 1);
 
 	return count;
 }
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 93219c3..895c50c 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -17,12 +17,12 @@
 #include <asm/ppc_asm.h>
 
 #ifdef CONFIG_PPC64
-#define SYSCALL(func)		.llong	.sys_##func,.sys_##func
-#define COMPAT_SYS(func)	.llong	.sys_##func,.compat_sys_##func
-#define PPC_SYS(func)		.llong	.ppc_##func,.ppc_##func
-#define OLDSYS(func)		.llong	.sys_ni_syscall,.sys_ni_syscall
-#define SYS32ONLY(func)		.llong	.sys_ni_syscall,.compat_sys_##func
-#define SYSX(f, f3264, f32)	.llong	.f,.f3264
+#define SYSCALL(func)		.llong	DOTSYM(sys_##func),DOTSYM(sys_##func)
+#define COMPAT_SYS(func)	.llong	DOTSYM(sys_##func),DOTSYM(compat_sys_##func)
+#define PPC_SYS(func)		.llong	DOTSYM(ppc_##func),DOTSYM(ppc_##func)
+#define OLDSYS(func)		.llong	DOTSYM(sys_ni_syscall),DOTSYM(sys_ni_syscall)
+#define SYS32ONLY(func)		.llong	DOTSYM(sys_ni_syscall),DOTSYM(compat_sys_##func)
+#define SYSX(f, f3264, f32)	.llong	DOTSYM(f),DOTSYM(f3264)
 #else
 #define SYSCALL(func)		.long	sys_##func
 #define COMPAT_SYS(func)	.long	sys_##func
@@ -36,6 +36,8 @@
 #define PPC_SYS_SPU(func)	PPC_SYS(func)
 #define SYSX_SPU(f, f3264, f32)	SYSX(f, f3264, f32)
 
+.section .rodata,"a"
+
 #ifdef CONFIG_PPC64
 #define sys_sigpending	sys_ni_syscall
 #define sys_old_getrlimit sys_ni_syscall
@@ -43,5 +45,7 @@
 	.p2align	3
 #endif
 
-_GLOBAL(sys_call_table)
+.globl sys_call_table
+sys_call_table:
+
 #include <asm/systbl.h>
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 03567c0..2a324f4 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -10,6 +10,7 @@
 #include <asm/ppc-opcode.h>
 #include <asm/ptrace.h>
 #include <asm/reg.h>
+#include <asm/bug.h>
 
 #ifdef CONFIG_VSX
 /* See fpu.S, this is borrowed from there */
@@ -41,7 +42,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);		\
 /* Stack frame offsets for local variables. */
 #define TM_FRAME_L0	TM_FRAME_SIZE-16
 #define TM_FRAME_L1	TM_FRAME_SIZE-8
-#define STACK_PARAM(x)	(48+((x)*8))
 
 
 /* In order to access the TM SPRs, TM must be enabled.  So, do so: */
@@ -78,12 +78,6 @@ _GLOBAL(tm_abort)
 	TABORT(R3)
 	blr
 
-	.section	".toc","aw"
-DSCR_DEFAULT:
-	.tc dscr_default[TC],dscr_default
-
-	.section	".text"
-
 /* void tm_reclaim(struct thread_struct *thread,
  *                 unsigned long orig_msr,
  *		   uint8_t cause)
@@ -108,12 +102,12 @@ _GLOBAL(tm_reclaim)
 	mflr	r0
 	stw	r6, 8(r1)
 	std	r0, 16(r1)
-	std	r2, 40(r1)
+	std	r2, STK_GOT(r1)
 	stdu	r1, -TM_FRAME_SIZE(r1)
 
 	/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
 
-	std	r3, STACK_PARAM(0)(r1)
+	std	r3, STK_PARAM(R3)(r1)
 	SAVE_NVGPRS(r1)
 
 	/* We need to setup MSR for VSX register save instructions.  Here we
@@ -175,6 +169,13 @@ dont_backup_vec:
 	stfd    fr0,FPSTATE_FPSCR(r7)
 
 dont_backup_fp:
+	/* Do sanity check on MSR to make sure we are suspended */
+	li	r7, (MSR_TS_S)@higher
+	srdi	r6, r14, 32
+	and	r6, r6, r7
+1:	tdeqi   r6, 0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
 	/* The moment we treclaim, ALL of our GPRs will switch
 	 * to user register state.  (FPRs, CCR etc. also!)
 	 * Use an sprg and a tm_scratch in the PACA to shuffle.
@@ -202,7 +203,7 @@ dont_backup_fp:
 	/* Now get some more GPRS free */
 	std	r7, GPR7(r1)			/* Temporary stash */
 	std	r12, GPR12(r1)			/* ''   ''    ''   */
-	ld	r12, STACK_PARAM(0)(r1)		/* Param 0, thread_struct * */
+	ld	r12, STK_PARAM(R3)(r1)		/* Param 0, thread_struct * */
 
 	std	r11, THREAD_TM_PPR(r12)		/* Store PPR and free r11 */
 
@@ -289,11 +290,10 @@ dont_backup_fp:
 	ld	r0, 16(r1)
 	mtcr	r4
 	mtlr	r0
-	ld	r2, 40(r1)
+	ld	r2, STK_GOT(r1)
 
-	/* Load system default DSCR */
-	ld	r4, DSCR_DEFAULT@toc(r2)
-	ld	r0, 0(r4)
+	/* Load CPU's default DSCR */
+	ld	r0, PACA_DSCR(r13)
 	mtspr	SPRN_DSCR, r0
 
 	blr
@@ -312,7 +312,7 @@ _GLOBAL(__tm_recheckpoint)
 	mflr	r0
 	stw	r5, 8(r1)
 	std	r0, 16(r1)
-	std	r2, 40(r1)
+	std	r2, STK_GOT(r1)
 	stdu	r1, -TM_FRAME_SIZE(r1)
 
 	/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD].
@@ -320,8 +320,6 @@ _GLOBAL(__tm_recheckpoint)
 	 */
 	SAVE_NVGPRS(r1)
 
-	std	r1, PACAR1(r13)
-
 	/* Load complete register state from ts_ckpt* registers */
 
 	addi	r7, r3, PT_CKPT_REGS		/* Thread's ckpt_regs */
@@ -385,12 +383,10 @@ restore_gprs:
 	/* ******************** CR,LR,CCR,MSR ********** */
 	ld	r4, _CTR(r7)
 	ld	r5, _LINK(r7)
-	ld	r6, _CCR(r7)
 	ld	r8, _XER(r7)
 
 	mtctr	r4
 	mtlr	r5
-	mtcr	r6
 	mtxer	r8
 
 	/* ******************** TAR ******************** */
@@ -406,7 +402,8 @@ restore_gprs:
 	li	r4, 0
 	mtmsrd	r4, 1
 
-	REST_4GPRS(0, r7)			/* GPR0-3 */
+	REST_GPR(0, r7)				/* GPR0 */
+	REST_2GPRS(2, r7)			/* GPR2-3 */
 	REST_GPR(4, r7)				/* GPR4 */
 	REST_4GPRS(8, r7)			/* GPR8-11 */
 	REST_2GPRS(12, r7)			/* GPR12-13 */
@@ -418,6 +415,31 @@ restore_gprs:
 	mtspr	SPRN_DSCR, r5
 	mtspr	SPRN_PPR, r6
 
+	/* Do final sanity check on TEXASR to make sure FS is set.  Do this
+	 * here before we load up the userspace r1 so any bugs we hit will get
+	 * a call chain */
+	mfspr	r5, SPRN_TEXASR
+	srdi	r5, r5, 16
+	li	r6, (TEXASR_FS)@h
+	and	r6, r6, r5
+1:	tdeqi	r6, 0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
+	/* Do final sanity check on MSR to make sure we are not transactional
+	 * or suspended
+	 */
+	mfmsr   r6
+	li	r5, (MSR_TS_MASK)@higher
+	srdi	r6, r6, 32
+	and	r6, r6, r5
+1:	tdnei   r6, 0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
+	/* Restore CR */
+	ld	r6, _CCR(r7)
+	mtcr    r6
+
+	REST_GPR(1, r7)				/* GPR1 */
 	REST_GPR(5, r7)				/* GPR5-7 */
 	REST_GPR(6, r7)
 	ld	r7, GPR7(r7)
@@ -448,11 +470,10 @@ restore_gprs:
 	ld	r0, 16(r1)
 	mtcr	r4
 	mtlr	r0
-	ld	r2, 40(r1)
+	ld	r2, STK_GOT(r1)
 
-	/* Load system default DSCR */
-	ld	r4, DSCR_DEFAULT@toc(r2)
-	ld	r0, 0(r4)
+	/* Load CPU's default DSCR */
+	ld	r0, PACA_DSCR(r13)
 	mtspr	SPRN_DSCR, r0
 
 	blr
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index aba05bb..7a12edb 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1236,7 +1236,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 	int core;
 	struct kvmppc_vcore *vcore;
 
-	core = id / threads_per_core;
+	core = id / threads_per_subcore;
 	if (core >= KVM_MAX_VCORES)
 		goto out;
 
@@ -1286,7 +1286,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 			init_waitqueue_head(&vcore->wq);
 			vcore->preempt_tb = TB_NIL;
 			vcore->lpcr = kvm->arch.lpcr;
-			vcore->first_vcpuid = core * threads_per_core;
+			vcore->first_vcpuid = core * threads_per_subcore;
 			vcore->kvm = kvm;
 		}
 		kvm->arch.vcores[core] = vcore;
@@ -1476,16 +1476,19 @@ static void kvmppc_wait_for_nap(struct kvmppc_vcore *vc)
 static int on_primary_thread(void)
 {
 	int cpu = smp_processor_id();
-	int thr = cpu_thread_in_core(cpu);
+	int thr;
 
-	if (thr)
+	/* Are we on a primary subcore? */
+	if (cpu_thread_in_subcore(cpu))
 		return 0;
-	while (++thr < threads_per_core)
+
+	thr = 0;
+	while (++thr < threads_per_subcore)
 		if (cpu_online(cpu + thr))
 			return 0;
 
 	/* Grab all hw threads so they can't go into the kernel */
-	for (thr = 1; thr < threads_per_core; ++thr) {
+	for (thr = 1; thr < threads_per_subcore; ++thr) {
 		if (kvmppc_grab_hwthread(cpu + thr)) {
 			/* Couldn't grab one; let the others go */
 			do {
@@ -1544,15 +1547,18 @@ static void kvmppc_run_core(struct kvmppc_vcore *vc)
 	}
 
 	/*
-	 * Make sure we are running on thread 0, and that
-	 * secondary threads are offline.
+	 * Make sure we are running on primary threads, and that secondary
+	 * threads are offline.  Also check if the number of threads in this
+	 * guest are greater than the current system threads per guest.
 	 */
-	if (threads_per_core > 1 && !on_primary_thread()) {
+	if ((threads_per_core > 1) &&
+	    ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
 		list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
 			vcpu->arch.ret = -EBUSY;
 		goto out;
 	}
 
+
 	vc->pcpu = smp_processor_id();
 	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
 		kvmppc_start_thread(vcpu);
@@ -1580,7 +1586,7 @@ static void kvmppc_run_core(struct kvmppc_vcore *vc)
 	/* wait for secondary threads to finish writing their state to memory */
 	if (vc->nap_count < vc->n_woken)
 		kvmppc_wait_for_nap(vc);
-	for (i = 0; i < threads_per_core; ++i)
+	for (i = 0; i < threads_per_subcore; ++i)
 		kvmppc_release_hwthread(vc->pcpu + i);
 	/* prevent other vcpu threads from doing kvmppc_start_thread() now */
 	vc->vcore_state = VCORE_EXITING;
@@ -2305,10 +2311,10 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm)
 	spin_lock_init(&kvm->arch.slot_phys_lock);
 
 	/*
-	 * Don't allow secondary CPU threads to come online
-	 * while any KVM VMs exist.
+	 * Track that we now have a HV mode VM active. This blocks secondary
+	 * CPU threads from coming online.
 	 */
-	inhibit_secondary_onlining();
+	kvm_hv_vm_activated();
 
 	return 0;
 }
@@ -2324,7 +2330,7 @@ static void kvmppc_free_vcores(struct kvm *kvm)
 
 static void kvmppc_core_destroy_vm_hv(struct kvm *kvm)
 {
-	uninhibit_secondary_onlining();
+	kvm_hv_vm_deactivated();
 
 	kvmppc_free_vcores(kvm);
 	if (kvm->arch.rma) {
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 8cd0dae..7cde8a6 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/cpu.h>
 #include <linux/kvm_host.h>
 #include <linux/preempt.h>
 #include <linux/export.h>
@@ -181,3 +182,33 @@ void __init kvm_cma_reserve(void)
 		kvm_cma_declare_contiguous(selected_size, align_size);
 	}
 }
+
+/*
+ * When running HV mode KVM we need to block certain operations while KVM VMs
+ * exist in the system. We use a counter of VMs to track this.
+ *
+ * One of the operations we need to block is onlining of secondaries, so we
+ * protect hv_vm_count with get/put_online_cpus().
+ */
+static atomic_t hv_vm_count;
+
+void kvm_hv_vm_activated(void)
+{
+	get_online_cpus();
+	atomic_inc(&hv_vm_count);
+	put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(kvm_hv_vm_activated);
+
+void kvm_hv_vm_deactivated(void)
+{
+	get_online_cpus();
+	atomic_dec(&hv_vm_count);
+	put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(kvm_hv_vm_deactivated);
+
+bool kvm_hv_mode_active(void)
+{
+	return atomic_read(&hv_vm_count) != 0;
+}
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index e18e3cf..8c86422 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -171,7 +171,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 #endif /* CONFIG_SMP */
 
 	/* Jump to partition switch code */
-	bl	.kvmppc_hv_entry_trampoline
+	bl	kvmppc_hv_entry_trampoline
 	nop
 
 /*
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 9747934..77356fd 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -292,8 +292,7 @@ kvm_start_guest:
 	beq	kvm_no_guest
 
 	/* Set HSTATE_DSCR(r13) to something sensible */
-	LOAD_REG_ADDR(r6, dscr_default)
-	ld	r6, 0(r6)
+	ld	r6, PACA_DSCR(r13)
 	std	r6, HSTATE_DSCR(r13)
 
 	bl	kvmppc_hv_entry
@@ -1799,7 +1798,7 @@ kvmppc_hdsi:
 	/* Search the hash table. */
 	mr	r3, r9			/* vcpu pointer */
 	li	r7, 1			/* data fault */
-	bl	.kvmppc_hpte_hv_fault
+	bl	kvmppc_hpte_hv_fault
 	ld	r9, HSTATE_KVM_VCPU(r13)
 	ld	r10, VCPU_PC(r9)
 	ld	r11, VCPU_MSR(r9)
@@ -1873,7 +1872,7 @@ kvmppc_hisi:
 	mr	r4, r10
 	mr	r6, r11
 	li	r7, 0			/* instruction fault */
-	bl	.kvmppc_hpte_hv_fault
+	bl	kvmppc_hpte_hv_fault
 	ld	r9, HSTATE_KVM_VCPU(r13)
 	ld	r10, VCPU_PC(r9)
 	ld	r11, VCPU_MSR(r9)
@@ -1947,16 +1946,16 @@ hcall_real_fallback:
 	.globl	hcall_real_table
 hcall_real_table:
 	.long	0		/* 0 - unused */
-	.long	.kvmppc_h_remove - hcall_real_table
-	.long	.kvmppc_h_enter - hcall_real_table
-	.long	.kvmppc_h_read - hcall_real_table
+	.long	DOTSYM(kvmppc_h_remove) - hcall_real_table
+	.long	DOTSYM(kvmppc_h_enter) - hcall_real_table
+	.long	DOTSYM(kvmppc_h_read) - hcall_real_table
 	.long	0		/* 0x10 - H_CLEAR_MOD */
 	.long	0		/* 0x14 - H_CLEAR_REF */
-	.long	.kvmppc_h_protect - hcall_real_table
-	.long	.kvmppc_h_get_tce - hcall_real_table
-	.long	.kvmppc_h_put_tce - hcall_real_table
+	.long	DOTSYM(kvmppc_h_protect) - hcall_real_table
+	.long	DOTSYM(kvmppc_h_get_tce) - hcall_real_table
+	.long	DOTSYM(kvmppc_h_put_tce) - hcall_real_table
 	.long	0		/* 0x24 - H_SET_SPRG0 */
-	.long	.kvmppc_h_set_dabr - hcall_real_table
+	.long	DOTSYM(kvmppc_h_set_dabr) - hcall_real_table
 	.long	0		/* 0x2c */
 	.long	0		/* 0x30 */
 	.long	0		/* 0x34 */
@@ -1972,11 +1971,11 @@ hcall_real_table:
 	.long	0		/* 0x5c */
 	.long	0		/* 0x60 */
 #ifdef CONFIG_KVM_XICS
-	.long	.kvmppc_rm_h_eoi - hcall_real_table
-	.long	.kvmppc_rm_h_cppr - hcall_real_table
-	.long	.kvmppc_rm_h_ipi - hcall_real_table
+	.long	DOTSYM(kvmppc_rm_h_eoi) - hcall_real_table
+	.long	DOTSYM(kvmppc_rm_h_cppr) - hcall_real_table
+	.long	DOTSYM(kvmppc_rm_h_ipi) - hcall_real_table
 	.long	0		/* 0x70 - H_IPOLL */
-	.long	.kvmppc_rm_h_xirr - hcall_real_table
+	.long	DOTSYM(kvmppc_rm_h_xirr) - hcall_real_table
 #else
 	.long	0		/* 0x64 - H_EOI */
 	.long	0		/* 0x68 - H_CPPR */
@@ -2010,7 +2009,7 @@ hcall_real_table:
 	.long	0		/* 0xd4 */
 	.long	0		/* 0xd8 */
 	.long	0		/* 0xdc */
-	.long	.kvmppc_h_cede - hcall_real_table
+	.long	DOTSYM(kvmppc_h_cede) - hcall_real_table
 	.long	0		/* 0xe4 */
 	.long	0		/* 0xe8 */
 	.long	0		/* 0xec */
@@ -2027,11 +2026,11 @@ hcall_real_table:
 	.long	0		/* 0x118 */
 	.long	0		/* 0x11c */
 	.long	0		/* 0x120 */
-	.long	.kvmppc_h_bulk_remove - hcall_real_table
+	.long	DOTSYM(kvmppc_h_bulk_remove) - hcall_real_table
 	.long	0		/* 0x128 */
 	.long	0		/* 0x12c */
 	.long	0		/* 0x130 */
-	.long	.kvmppc_h_set_xdabr - hcall_real_table
+	.long	DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table
 hcall_real_table_end:
 
 ignore_hdec:
@@ -2256,7 +2255,7 @@ kvm_cede_exit:
 	/* Try to handle a machine check in real mode */
 machine_check_realmode:
 	mr	r3, r9		/* get vcpu pointer */
-	bl	.kvmppc_realmode_machine_check
+	bl	kvmppc_realmode_machine_check
 	nop
 	cmpdi	r3, 0		/* continue exiting from guest? */
 	ld	r9, HSTATE_KVM_VCPU(r13)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index bab20f4..61c738a 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -426,7 +426,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	case KVM_CAP_PPC_SMT:
 		if (hv_enabled)
-			r = threads_per_core;
+			r = threads_per_subcore;
 		else
 			r = 0;
 		break;
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 95a20e1..59fa2de 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -23,9 +23,7 @@ obj-y			+= checksum_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC64)	+= checksum_wrappers_64.o
 endif
 
-ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),)
 obj-$(CONFIG_PPC64)		+= memcpy_power7.o memcpy_64.o 
-endif
 
 obj-$(CONFIG_PPC_EMULATE_SSTEP)	+= sstep.o ldstfp.o
 
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 9f9434a..a3c4dc4 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -16,11 +16,11 @@ PPC64_CACHES:
         .tc             ppc64_caches[TC],ppc64_caches
         .section        ".text"
 
-_GLOBAL(copy_page)
+_GLOBAL_TOC(copy_page)
 BEGIN_FTR_SECTION
 	lis	r5,PAGE_SIZE@h
 FTR_SECTION_ELSE
-	b	.copypage_power7
+	b	copypage_power7
 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
 	ori	r5,r5,PAGE_SIZE@l
 BEGIN_FTR_SECTION
diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S
index 395c594..d7dafb3 100644
--- a/arch/powerpc/lib/copypage_power7.S
+++ b/arch/powerpc/lib/copypage_power7.S
@@ -56,15 +56,15 @@ _GLOBAL(copypage_power7)
 
 #ifdef CONFIG_ALTIVEC
 	mflr	r0
-	std	r3,48(r1)
-	std	r4,56(r1)
+	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+	std	r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
-	bl	.enter_vmx_copy
+	bl	enter_vmx_copy
 	cmpwi	r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
-	ld	r3,STACKFRAMESIZE+48(r1)
-	ld	r4,STACKFRAMESIZE+56(r1)
+	ld	r3,STK_REG(R31)(r1)
+	ld	r4,STK_REG(R30)(r1)
 	mtlr	r0
 
 	li	r0,(PAGE_SIZE/128)
@@ -103,7 +103,7 @@ _GLOBAL(copypage_power7)
 	addi	r3,r3,128
 	bdnz	1b
 
-	b	.exit_vmx_copy		/* tail call optimise */
+	b	exit_vmx_copy		/* tail call optimise */
 
 #else
 	li	r0,(PAGE_SIZE/128)
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 596a285..0860ee4 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -18,7 +18,7 @@
 #endif
 
 	.align	7
-_GLOBAL(__copy_tofrom_user)
+_GLOBAL_TOC(__copy_tofrom_user)
 BEGIN_FTR_SECTION
 	nop
 FTR_SECTION_ELSE
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index e8e9c36..c46c876 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -66,7 +66,7 @@
 	ld	r15,STK_REG(R15)(r1)
 	ld	r14,STK_REG(R14)(r1)
 .Ldo_err3:
-	bl	.exit_vmx_usercopy
+	bl	exit_vmx_usercopy
 	ld	r0,STACKFRAMESIZE+16(r1)
 	mtlr	r0
 	b	.Lexit
@@ -85,9 +85,9 @@
 .Lexit:
 	addi	r1,r1,STACKFRAMESIZE
 .Ldo_err1:
-	ld	r3,48(r1)
-	ld	r4,56(r1)
-	ld	r5,64(r1)
+	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+	ld	r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+	ld	r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
 	b	__copy_tofrom_user_base
 
 
@@ -96,18 +96,18 @@ _GLOBAL(__copy_tofrom_user_power7)
 	cmpldi	r5,16
 	cmpldi	cr1,r5,4096
 
-	std	r3,48(r1)
-	std	r4,56(r1)
-	std	r5,64(r1)
+	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+	std	r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+	std	r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
 
 	blt	.Lshort_copy
 	bgt	cr1,.Lvmx_copy
 #else
 	cmpldi	r5,16
 
-	std	r3,48(r1)
-	std	r4,56(r1)
-	std	r5,64(r1)
+	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+	std	r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+	std	r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
 
 	blt	.Lshort_copy
 #endif
@@ -295,12 +295,12 @@ err1;	stb	r0,0(r3)
 	mflr	r0
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
-	bl	.enter_vmx_usercopy
+	bl	enter_vmx_usercopy
 	cmpwi	cr1,r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
-	ld	r3,STACKFRAMESIZE+48(r1)
-	ld	r4,STACKFRAMESIZE+56(r1)
-	ld	r5,STACKFRAMESIZE+64(r1)
+	ld	r3,STK_REG(R31)(r1)
+	ld	r4,STK_REG(R30)(r1)
+	ld	r5,STK_REG(R29)(r1)
 	mtlr	r0
 
 	/*
@@ -514,7 +514,7 @@ err3;	lbz	r0,0(r4)
 err3;	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
-	b	.exit_vmx_usercopy	/* tail call optimise */
+	b	exit_vmx_usercopy	/* tail call optimise */
 
 .Lvmx_unaligned_copy:
 	/* Get the destination 16B aligned */
@@ -717,5 +717,5 @@ err3;	lbz	r0,0(r4)
 err3;	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
-	b	.exit_vmx_usercopy	/* tail call optimise */
+	b	exit_vmx_usercopy	/* tail call optimise */
 #endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/hweight_64.S b/arch/powerpc/lib/hweight_64.S
index 9b96ff2..19e6600 100644
--- a/arch/powerpc/lib/hweight_64.S
+++ b/arch/powerpc/lib/hweight_64.S
@@ -24,7 +24,7 @@
 
 _GLOBAL(__arch_hweight8)
 BEGIN_FTR_SECTION
-	b .__sw_hweight8
+	b __sw_hweight8
 	nop
 	nop
 FTR_SECTION_ELSE
@@ -35,7 +35,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
 
 _GLOBAL(__arch_hweight16)
 BEGIN_FTR_SECTION
-	b .__sw_hweight16
+	b __sw_hweight16
 	nop
 	nop
 	nop
@@ -57,7 +57,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
 
 _GLOBAL(__arch_hweight32)
 BEGIN_FTR_SECTION
-	b .__sw_hweight32
+	b __sw_hweight32
 	nop
 	nop
 	nop
@@ -82,7 +82,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
 
 _GLOBAL(__arch_hweight64)
 BEGIN_FTR_SECTION
-	b .__sw_hweight64
+	b __sw_hweight64
 	nop
 	nop
 	nop
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index f4fcb0b..0738f96 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -79,8 +79,8 @@ _GLOBAL(memset)
 
 _GLOBAL(memmove)
 	cmplw	0,r3,r4
-	bgt	.backwards_memcpy
-	b	.memcpy
+	bgt	backwards_memcpy
+	b	memcpy
 
 _GLOBAL(backwards_memcpy)
 	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 72ad055..32a06ec 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -10,14 +10,29 @@
 #include <asm/ppc_asm.h>
 
 	.align	7
-_GLOBAL(memcpy)
+_GLOBAL_TOC(memcpy)
 BEGIN_FTR_SECTION
-	std	r3,48(r1)	/* save destination pointer for return value */
+#ifdef __LITTLE_ENDIAN__
+	cmpdi	cr7,r5,0
+#else
+	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)	/* save destination pointer for return value */
+#endif
 FTR_SECTION_ELSE
 #ifndef SELFTEST
 	b	memcpy_power7
 #endif
 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
+#ifdef __LITTLE_ENDIAN__
+	/* dumb little-endian memcpy that will get replaced at runtime */
+	addi r9,r3,-1
+	addi r4,r4,-1
+	beqlr cr7
+	mtctr r5
+1:	lbzu r10,1(r4)
+	stbu r10,1(r9)
+	bdnz 1b
+	blr
+#else
 	PPC_MTOCRF(0x01,r5)
 	cmpldi	cr1,r5,16
 	neg	r6,r3		# LS 3 bits = # bytes to 8-byte dest bdry
@@ -73,7 +88,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 2:	bf	cr7*4+3,3f
 	lbz	r9,8(r4)
 	stb	r9,0(r3)
-3:	ld	r3,48(r1)	/* return dest pointer */
+3:	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)	/* return dest pointer */
 	blr
 
 .Lsrc_unaligned:
@@ -156,7 +171,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 2:	bf	cr7*4+3,3f
 	rotldi	r9,r9,8
 	stb	r9,0(r3)
-3:	ld	r3,48(r1)	/* return dest pointer */
+3:	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)	/* return dest pointer */
 	blr
 
 .Ldst_unaligned:
@@ -201,5 +216,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 3:	bf	cr7*4+3,4f
 	lbz	r0,0(r4)
 	stb	r0,0(r3)
-4:	ld	r3,48(r1)	/* return dest pointer */
+4:	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)	/* return dest pointer */
 	blr
+#endif
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index e4177db..2ff5c14 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -33,14 +33,14 @@ _GLOBAL(memcpy_power7)
 	cmpldi	r5,16
 	cmpldi	cr1,r5,4096
 
-	std	r3,48(r1)
+	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
 
 	blt	.Lshort_copy
 	bgt	cr1,.Lvmx_copy
 #else
 	cmpldi	r5,16
 
-	std	r3,48(r1)
+	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
 
 	blt	.Lshort_copy
 #endif
@@ -216,7 +216,7 @@ _GLOBAL(memcpy_power7)
 	lbz	r0,0(r4)
 	stb	r0,0(r3)
 
-15:	ld	r3,48(r1)
+15:	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
 	blr
 
 .Lunwind_stack_nonvmx_copy:
@@ -226,16 +226,16 @@ _GLOBAL(memcpy_power7)
 #ifdef CONFIG_ALTIVEC
 .Lvmx_copy:
 	mflr	r0
-	std	r4,56(r1)
-	std	r5,64(r1)
+	std	r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+	std	r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
-	bl	.enter_vmx_copy
+	bl	enter_vmx_copy
 	cmpwi	cr1,r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
-	ld	r3,STACKFRAMESIZE+48(r1)
-	ld	r4,STACKFRAMESIZE+56(r1)
-	ld	r5,STACKFRAMESIZE+64(r1)
+	ld	r3,STK_REG(R31)(r1)
+	ld	r4,STK_REG(R30)(r1)
+	ld	r5,STK_REG(R29)(r1)
 	mtlr	r0
 
 	/*
@@ -447,8 +447,8 @@ _GLOBAL(memcpy_power7)
 	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
-	ld	r3,48(r1)
-	b	.exit_vmx_copy		/* tail call optimise */
+	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+	b	exit_vmx_copy		/* tail call optimise */
 
 .Lvmx_unaligned_copy:
 	/* Get the destination 16B aligned */
@@ -651,6 +651,6 @@ _GLOBAL(memcpy_power7)
 	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
-	ld	r3,48(r1)
-	b	.exit_vmx_copy		/* tail call optimise */
+	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+	b	exit_vmx_copy		/* tail call optimise */
 #endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/string_64.S b/arch/powerpc/lib/string_64.S
index 3b1e480..7bd9549 100644
--- a/arch/powerpc/lib/string_64.S
+++ b/arch/powerpc/lib/string_64.S
@@ -77,7 +77,7 @@ err3;	stb	r0,0(r3)
 	mr	r3,r4
 	blr
 
-_GLOBAL(__clear_user)
+_GLOBAL_TOC(__clear_user)
 	cmpdi	r4,32
 	neg	r6,r3
 	li	r0,0
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 1136d26..057cbbb 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -159,7 +159,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 BEGIN_FTR_SECTION
 	mr	r4,r30
 	mr	r5,r7
-	bl	.hash_page_do_lazy_icache
+	bl	hash_page_do_lazy_icache
 END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 
 	/* At this point, r3 contains new PP bits, save them in
@@ -201,7 +201,8 @@ htab_insert_pte:
 	li	r8,MMU_PAGE_4K		/* page size */
 	li	r9,MMU_PAGE_4K		/* actual page size */
 	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-_GLOBAL(htab_call_hpte_insert1)
+.globl htab_call_hpte_insert1
+htab_call_hpte_insert1:
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
 	bge	htab_pte_insert_ok	/* Insertion successful */
@@ -225,7 +226,8 @@ _GLOBAL(htab_call_hpte_insert1)
 	li	r8,MMU_PAGE_4K		/* page size */
 	li	r9,MMU_PAGE_4K		/* actual page size */
 	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-_GLOBAL(htab_call_hpte_insert2)
+.globl htab_call_hpte_insert2
+htab_call_hpte_insert2:
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
 	bge+	htab_pte_insert_ok	/* Insertion successful */
@@ -242,7 +244,8 @@ _GLOBAL(htab_call_hpte_insert2)
 2:	and	r0,r5,r27
 	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */	
 	/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
+.globl htab_call_hpte_remove
+htab_call_hpte_remove:
 	bl	.			/* Patched by htab_finish_init() */
 
 	/* Try all again */
@@ -296,7 +299,8 @@ htab_modify_pte:
 	li	r7,MMU_PAGE_4K		/* actual page size */
 	ld	r8,STK_PARAM(R9)(r1)	/* segment size */
 	ld	r9,STK_PARAM(R8)(r1)	/* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
+.globl htab_call_hpte_updatepp
+htab_call_hpte_updatepp:
 	bl	.			/* Patched by htab_finish_init() */
 
 	/* if we failed because typically the HPTE wasn't really here
@@ -471,7 +475,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 BEGIN_FTR_SECTION
 	mr	r4,r30
 	mr	r5,r7
-	bl	.hash_page_do_lazy_icache
+	bl	hash_page_do_lazy_icache
 END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 
 	/* At this point, r3 contains new PP bits, save them in
@@ -526,7 +530,8 @@ htab_special_pfn:
 	li	r8,MMU_PAGE_4K		/* page size */
 	li	r9,MMU_PAGE_4K		/* actual page size */
 	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-_GLOBAL(htab_call_hpte_insert1)
+.globl htab_call_hpte_insert1
+htab_call_hpte_insert1:
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
 	bge	htab_pte_insert_ok	/* Insertion successful */
@@ -554,7 +559,8 @@ _GLOBAL(htab_call_hpte_insert1)
 	li	r8,MMU_PAGE_4K		/* page size */
 	li	r9,MMU_PAGE_4K		/* actual page size */
 	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-_GLOBAL(htab_call_hpte_insert2)
+.globl htab_call_hpte_insert2
+htab_call_hpte_insert2:
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
 	bge+	htab_pte_insert_ok	/* Insertion successful */
@@ -571,7 +577,8 @@ _GLOBAL(htab_call_hpte_insert2)
 2:	and	r0,r5,r27
 	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
 	/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
+.globl htab_call_hpte_remove
+htab_call_hpte_remove:
 	bl	.			/* patched by htab_finish_init() */
 
 	/* Try all again */
@@ -588,7 +595,7 @@ htab_inval_old_hpte:
 	li	r6,MMU_PAGE_64K		/* psize */
 	ld	r7,STK_PARAM(R9)(r1)	/* ssize */
 	ld	r8,STK_PARAM(R8)(r1)	/* local */
-	bl	.flush_hash_page
+	bl	flush_hash_page
 	/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
 	lis	r0,_PAGE_HPTE_SUB@h
 	ori	r0,r0,_PAGE_HPTE_SUB@l
@@ -660,7 +667,8 @@ htab_modify_pte:
 	li	r7,MMU_PAGE_4K		/* actual page size */
 	ld	r8,STK_PARAM(R9)(r1)	/* segment size */
 	ld	r9,STK_PARAM(R8)(r1)	/* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
+.globl htab_call_hpte_updatepp
+htab_call_hpte_updatepp:
 	bl	.			/* patched by htab_finish_init() */
 
 	/* if we failed because typically the HPTE wasn't really here
@@ -812,7 +820,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 BEGIN_FTR_SECTION
 	mr	r4,r30
 	mr	r5,r7
-	bl	.hash_page_do_lazy_icache
+	bl	hash_page_do_lazy_icache
 END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 
 	/* At this point, r3 contains new PP bits, save them in
@@ -857,7 +865,8 @@ ht64_insert_pte:
 	li	r8,MMU_PAGE_64K
 	li	r9,MMU_PAGE_64K		/* actual page size */
 	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-_GLOBAL(ht64_call_hpte_insert1)
+.globl ht64_call_hpte_insert1
+ht64_call_hpte_insert1:
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
 	bge	ht64_pte_insert_ok	/* Insertion successful */
@@ -881,7 +890,8 @@ _GLOBAL(ht64_call_hpte_insert1)
 	li	r8,MMU_PAGE_64K
 	li	r9,MMU_PAGE_64K		/* actual page size */
 	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-_GLOBAL(ht64_call_hpte_insert2)
+.globl ht64_call_hpte_insert2
+ht64_call_hpte_insert2:
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
 	bge+	ht64_pte_insert_ok	/* Insertion successful */
@@ -898,7 +908,8 @@ _GLOBAL(ht64_call_hpte_insert2)
 2:	and	r0,r5,r27
 	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
 	/* Call ppc_md.hpte_remove */
-_GLOBAL(ht64_call_hpte_remove)
+.globl ht64_call_hpte_remove
+ht64_call_hpte_remove:
 	bl	.			/* patched by htab_finish_init() */
 
 	/* Try all again */
@@ -952,7 +963,8 @@ ht64_modify_pte:
 	li	r7,MMU_PAGE_64K		/* actual page size */
 	ld	r8,STK_PARAM(R9)(r1)	/* segment size */
 	ld	r9,STK_PARAM(R8)(r1)	/* get "local" param */
-_GLOBAL(ht64_call_hpte_updatepp)
+.globl ht64_call_hpte_updatepp
+ht64_call_hpte_updatepp:
 	bl	.			/* patched by htab_finish_init() */
 
 	/* if we failed because typically the HPTE wasn't really here
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 350aa58..88fdd9d 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -449,6 +449,24 @@ static void mmu_psize_set_default_penc(void)
 			mmu_psize_defs[bpsize].penc[apsize] = -1;
 }
 
+#ifdef CONFIG_PPC_64K_PAGES
+
+static bool might_have_hea(void)
+{
+	/*
+	 * The HEA ethernet adapter requires awareness of the
+	 * GX bus. Without that awareness we can easily assume
+	 * we will never see an HEA ethernet device.
+	 */
+#ifdef CONFIG_IBMEBUS
+	return !cpu_has_feature(CPU_FTR_ARCH_207S);
+#else
+	return false;
+#endif
+}
+
+#endif /* #ifdef CONFIG_PPC_64K_PAGES */
+
 static void __init htab_init_page_sizes(void)
 {
 	int rc;
@@ -503,10 +521,11 @@ static void __init htab_init_page_sizes(void)
 			mmu_linear_psize = MMU_PAGE_64K;
 		if (mmu_has_feature(MMU_FTR_CI_LARGE_PAGE)) {
 			/*
-			 * Don't use 64k pages for ioremap on pSeries, since
-			 * that would stop us accessing the HEA ethernet.
+			 * When running on pSeries using 64k pages for ioremap
+			 * would stop us accessing the HEA ethernet. So if we
+			 * have the chance of ever seeing one, stay at 4k.
 			 */
-			if (!machine_is(pseries))
+			if (!might_have_hea() || !machine_is(pseries))
 				mmu_io_psize = MMU_PAGE_64K;
 		} else
 			mmu_ci_restrictions = 1;
@@ -607,47 +626,43 @@ int remove_section_mapping(unsigned long start, unsigned long end)
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-#define FUNCTION_TEXT(A)	((*(unsigned long *)(A)))
+extern u32 htab_call_hpte_insert1[];
+extern u32 htab_call_hpte_insert2[];
+extern u32 htab_call_hpte_remove[];
+extern u32 htab_call_hpte_updatepp[];
+extern u32 ht64_call_hpte_insert1[];
+extern u32 ht64_call_hpte_insert2[];
+extern u32 ht64_call_hpte_remove[];
+extern u32 ht64_call_hpte_updatepp[];
 
 static void __init htab_finish_init(void)
 {
-	extern unsigned int *htab_call_hpte_insert1;
-	extern unsigned int *htab_call_hpte_insert2;
-	extern unsigned int *htab_call_hpte_remove;
-	extern unsigned int *htab_call_hpte_updatepp;
-
 #ifdef CONFIG_PPC_HAS_HASH_64K
-	extern unsigned int *ht64_call_hpte_insert1;
-	extern unsigned int *ht64_call_hpte_insert2;
-	extern unsigned int *ht64_call_hpte_remove;
-	extern unsigned int *ht64_call_hpte_updatepp;
-
 	patch_branch(ht64_call_hpte_insert1,
-		FUNCTION_TEXT(ppc_md.hpte_insert),
+		ppc_function_entry(ppc_md.hpte_insert),
 		BRANCH_SET_LINK);
 	patch_branch(ht64_call_hpte_insert2,
-		FUNCTION_TEXT(ppc_md.hpte_insert),
+		ppc_function_entry(ppc_md.hpte_insert),
 		BRANCH_SET_LINK);
 	patch_branch(ht64_call_hpte_remove,
-		FUNCTION_TEXT(ppc_md.hpte_remove),
+		ppc_function_entry(ppc_md.hpte_remove),
 		BRANCH_SET_LINK);
 	patch_branch(ht64_call_hpte_updatepp,
-		FUNCTION_TEXT(ppc_md.hpte_updatepp),
+		ppc_function_entry(ppc_md.hpte_updatepp),
 		BRANCH_SET_LINK);
-
 #endif /* CONFIG_PPC_HAS_HASH_64K */
 
 	patch_branch(htab_call_hpte_insert1,
-		FUNCTION_TEXT(ppc_md.hpte_insert),
+		ppc_function_entry(ppc_md.hpte_insert),
 		BRANCH_SET_LINK);
 	patch_branch(htab_call_hpte_insert2,
-		FUNCTION_TEXT(ppc_md.hpte_insert),
+		ppc_function_entry(ppc_md.hpte_insert),
 		BRANCH_SET_LINK);
 	patch_branch(htab_call_hpte_remove,
-		FUNCTION_TEXT(ppc_md.hpte_remove),
+		ppc_function_entry(ppc_md.hpte_remove),
 		BRANCH_SET_LINK);
 	patch_branch(htab_call_hpte_updatepp,
-		FUNCTION_TEXT(ppc_md.hpte_updatepp),
+		ppc_function_entry(ppc_md.hpte_updatepp),
 		BRANCH_SET_LINK);
 }
 
@@ -964,6 +979,22 @@ void hash_failure_debug(unsigned long ea, unsigned long access,
 		trap, vsid, ssize, psize, lpsize, pte);
 }
 
+static void check_paca_psize(unsigned long ea, struct mm_struct *mm,
+			     int psize, bool user_region)
+{
+	if (user_region) {
+		if (psize != get_paca_psize(ea)) {
+			get_paca()->context = mm->context;
+			slb_flush_and_rebolt();
+		}
+	} else if (get_paca()->vmalloc_sllp !=
+		   mmu_psize_defs[mmu_vmalloc_psize].sllp) {
+		get_paca()->vmalloc_sllp =
+			mmu_psize_defs[mmu_vmalloc_psize].sllp;
+		slb_vmalloc_update();
+	}
+}
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -1085,6 +1116,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 			WARN_ON(1);
 		}
 #endif
+		check_paca_psize(ea, mm, psize, user_region);
+
 		goto bail;
 	}
 
@@ -1125,17 +1158,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 #endif
 		}
 	}
-	if (user_region) {
-		if (psize != get_paca_psize(ea)) {
-			get_paca()->context = mm->context;
-			slb_flush_and_rebolt();
-		}
-	} else if (get_paca()->vmalloc_sllp !=
-		   mmu_psize_defs[mmu_vmalloc_psize].sllp) {
-		get_paca()->vmalloc_sllp =
-			mmu_psize_defs[mmu_vmalloc_psize].sllp;
-		slb_vmalloc_update();
-	}
+
+	check_paca_psize(ea, mm, psize, user_region);
 #endif /* CONFIG_PPC_64K_PAGES */
 
 #ifdef CONFIG_PPC_HAS_HASH_64K
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 964a5f6..0399a67 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -256,10 +256,14 @@ static inline void patch_slb_encoding(unsigned int *insn_addr,
 	patch_instruction(insn_addr, insn);
 }
 
+extern u32 slb_compare_rr_to_size[];
+extern u32 slb_miss_kernel_load_linear[];
+extern u32 slb_miss_kernel_load_io[];
+extern u32 slb_compare_rr_to_size[];
+extern u32 slb_miss_kernel_load_vmemmap[];
+
 void slb_set_size(u16 size)
 {
-	extern unsigned int *slb_compare_rr_to_size;
-
 	if (mmu_slb_size == size)
 		return;
 
@@ -272,11 +276,7 @@ void slb_initialize(void)
 	unsigned long linear_llp, vmalloc_llp, io_llp;
 	unsigned long lflags, vflags;
 	static int slb_encoding_inited;
-	extern unsigned int *slb_miss_kernel_load_linear;
-	extern unsigned int *slb_miss_kernel_load_io;
-	extern unsigned int *slb_compare_rr_to_size;
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-	extern unsigned int *slb_miss_kernel_load_vmemmap;
 	unsigned long vmemmap_llp;
 #endif
 
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 17aa6df..736d18b 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -35,7 +35,7 @@ _GLOBAL(slb_allocate_realmode)
 	 * check for bad kernel/user address
 	 * (ea & ~REGION_MASK) >= PGTABLE_RANGE
 	 */
-	rldicr. r9,r3,4,(63 - 46 - 4)
+	rldicr. r9,r3,4,(63 - PGTABLE_EADDR_SIZE - 4)
 	bne-	8f
 
 	srdi	r9,r3,60		/* get region */
@@ -59,7 +59,8 @@ _GLOBAL(slb_allocate_realmode)
 	/* Linear mapping encoding bits, the "li" instruction below will
 	 * be patched by the kernel at boot
 	 */
-_GLOBAL(slb_miss_kernel_load_linear)
+.globl slb_miss_kernel_load_linear
+slb_miss_kernel_load_linear:
 	li	r11,0
 	/*
 	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
@@ -79,7 +80,8 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	/* Check virtual memmap region. To be patches at kernel boot */
 	cmpldi	cr0,r9,0xf
 	bne	1f
-_GLOBAL(slb_miss_kernel_load_vmemmap)
+.globl slb_miss_kernel_load_vmemmap
+slb_miss_kernel_load_vmemmap:
 	li	r11,0
 	b	6f
 1:
@@ -95,7 +97,8 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 	b	6f
 5:
 	/* IO mapping */
-	_GLOBAL(slb_miss_kernel_load_io)
+.globl slb_miss_kernel_load_io
+slb_miss_kernel_load_io:
 	li	r11,0
 6:
 	/*
@@ -250,7 +253,8 @@ slb_finish_load:
 7:	ld	r10,PACASTABRR(r13)
 	addi	r10,r10,1
 	/* This gets soft patched on boot. */
-_GLOBAL(slb_compare_rr_to_size)
+.globl slb_compare_rr_to_size
+slb_compare_rr_to_size:
 	cmpldi	r10,0
 
 	blt+	4f
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ae3d5b7..92cb18d 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -596,8 +596,13 @@ static void __early_init_mmu(int boot_cpu)
 	/* XXX This should be decided at runtime based on supported
 	 * page sizes in the TLB, but for now let's assume 16M is
 	 * always there and a good fit (which it probably is)
+	 *
+	 * Freescale booke only supports 4K pages in TLB0, so use that.
 	 */
-	mmu_vmemmap_psize = MMU_PAGE_16M;
+	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
+		mmu_vmemmap_psize = MMU_PAGE_4K;
+	else
+		mmu_vmemmap_psize = MMU_PAGE_16M;
 
 	/* XXX This code only checks for TLB 0 capabilities and doesn't
 	 *     check what page size combos are supported by the HW. It
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index dc1a264..4d88f6a 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -199,6 +199,34 @@ config CURRITUCK
 	help
 	  This option enables support for the IBM Currituck (476fpe) evaluation board
 
+config AKEBONO
+	bool "IBM Akebono (476gtr) Support"
+	depends on PPC_47x
+	default n
+	select SWIOTLB
+	select 476FPE
+	select PPC4xx_PCI_EXPRESS
+	select PCI_MSI
+	select PPC4xx_HSTA_MSI
+	select I2C
+	select I2C_IBM_IIC
+	select NETDEVICES
+	select ETHERNET
+	select NET_VENDOR_IBM
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII_WOL
+	select USB
+	select USB_OHCI_HCD_PLATFORM
+	select USB_EHCI_HCD_PLATFORM
+	select MMC_SDHCI
+	select MMC_SDHCI_PLTFM
+	select MMC_SDHCI_OF_476GTR
+	select ATA
+	select SATA_AHCI_PLATFORM
+	help
+	  This option enables support for the IBM Akebono (476gtr) evaluation board
+
+
 config ICON
 	bool "Icon"
 	depends on 44x
@@ -323,6 +351,20 @@ config APM821xx
 	select IBM_EMAC_EMAC4
 	select IBM_EMAC_TAH
 
+config 476FPE_ERR46
+	depends on 476FPE
+	bool "Enable linker work around for PPC476FPE errata #46"
+	help
+	  This option enables a work around for an icache bug on 476
+	  that can cause execution of stale instructions when falling
+	  through pages (IBM errata #46). It requires a recent version
+	  of binutils which supports the --ppc476-workaround option.
+
+	  The work around enables the appropriate linker options and
+	  ensures that all module output sections are aligned to 4K
+	  page boundaries. The work around is only required when
+	  building modules.
+
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index d03833a..26d35b5 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
-obj-$(CONFIG_CURRITUCK)	+= currituck.o
+obj-$(CONFIG_CURRITUCK)	+= ppc476.o
+obj-$(CONFIG_AKEBONO)	+= ppc476.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/ppc476.c
index 7f1b71a..33986c1 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -1,7 +1,8 @@
 /*
- * Currituck board specific routines
+ * PowerPC 476FPE board specific routines
  *
- * Copyright © 2011 Tony Breeds IBM Corporation
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
  *
  * Based on earlier code:
  *    Matt Porter <mporter@kernel.crashing.org>
@@ -35,8 +36,9 @@
 #include <asm/mmu.h>
 
 #include <linux/pci.h>
+#include <linux/i2c.h>
 
-static __initdata struct of_device_id ppc47x_of_bus[] = {
+static struct of_device_id ppc47x_of_bus[] __initdata = {
 	{ .compatible = "ibm,plb4", },
 	{ .compatible = "ibm,plb6", },
 	{ .compatible = "ibm,opb", },
@@ -55,15 +57,69 @@ static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
 
+/* Akebono has an AVR microcontroller attached to the I2C bus
+ * which is used to power off/reset the system. */
+
+/* AVR I2C Commands */
+#define AVR_PWRCTL_CMD (0x26)
+
+/* Flags for the power control I2C commands */
+#define AVR_PWRCTL_PWROFF (0x01)
+#define AVR_PWRCTL_RESET (0x02)
+
+static struct i2c_client *avr_i2c_client;
+static void avr_halt_system(int pwrctl_flags)
+{
+	/* Request the AVR to reset the system */
+	i2c_smbus_write_byte_data(avr_i2c_client,
+				  AVR_PWRCTL_CMD, pwrctl_flags);
+
+	/* Wait for system to be reset */
+	while (1)
+		;
+}
+
+static void avr_power_off_system(void)
+{
+	avr_halt_system(AVR_PWRCTL_PWROFF);
+}
+
+static void avr_reset_system(char *cmd)
+{
+	avr_halt_system(AVR_PWRCTL_RESET);
+}
+
+static int avr_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	avr_i2c_client = client;
+	ppc_md.restart = avr_reset_system;
+	ppc_md.power_off = avr_power_off_system;
+	return 0;
+}
+
+static const struct i2c_device_id avr_id[] = {
+	{ "akebono-avr", 0 },
+	{ }
+};
+
+static struct i2c_driver avr_driver = {
+	.driver = {
+		.name = "akebono-avr",
+	},
+	.probe = avr_probe,
+	.id_table = avr_id,
+};
+
 static int __init ppc47x_device_probe(void)
 {
+	i2c_add_driver(&avr_driver);
 	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
 
 	return 0;
 }
 machine_device_initcall(ppc47x, ppc47x_device_probe);
 
-/* We can have either UICs or MPICs */
 static void __init ppc47x_init_irq(void)
 {
 	struct device_node *np;
@@ -157,43 +213,36 @@ static void __init ppc47x_setup_arch(void)
 {
 
 	/* No need to check the DMA config as we /know/ our windows are all of
- 	 * RAM.  Lets hope that doesn't change */
+	 * RAM.  Lets hope that doesn't change */
 	swiotlb_detect_4g();
 
 	ppc47x_smp_init();
 }
 
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init ppc47x_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
-		return 0;
-
-	return 1;
-}
-
 static int board_rev = -1;
 static int __init ppc47x_get_board_rev(void)
 {
-	u8 fpga_reg0;
-	void *fpga;
-	struct device_node *np;
+	int reg;
+	u8 *fpga;
+	struct device_node *np = NULL;
+
+	if (of_machine_is_compatible("ibm,currituck")) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
+		reg = 0;
+	} else if (of_machine_is_compatible("ibm,akebono")) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga");
+		reg = 2;
+	}
 
-	np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
 	if (!np)
 		goto fail;
 
-	fpga = of_iomap(np, 0);
+	fpga = (u8 *) of_iomap(np, 0);
 	of_node_put(np);
 	if (!fpga)
 		goto fail;
 
-	fpga_reg0 = ioread8(fpga);
-	board_rev = fpga_reg0 & 0x03;
+	board_rev = ioread8(fpga + reg) & 0x03;
 	pr_info("%s: Found board revision %d\n", __func__, board_rev);
 	iounmap(fpga);
 	return 0;
@@ -208,7 +257,7 @@ machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
 static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
 {
 	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
-	                              dev->device == 0x00e0)) {
+				      dev->device == 0x00e0)) {
 		if (board_rev == 0) {
 			dev->irq = irq_create_mapping(NULL, 47);
 			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
@@ -221,13 +270,30 @@ static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
 	}
 }
 
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "ibm,akebono"))
+		return 1;
+
+	if (of_flat_dt_is_compatible(root, "ibm,currituck")) {
+		ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup;
+		return 1;
+	}
+
+	return 0;
+}
+
 define_machine(ppc47x) {
 	.name			= "PowerPC 47x",
 	.probe			= ppc47x_probe,
 	.progress		= udbg_progress,
 	.init_IRQ		= ppc47x_init_irq,
 	.setup_arch		= ppc47x_setup_arch,
-	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
 	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/ppc476_modules.lds b/arch/powerpc/platforms/44x/ppc476_modules.lds
new file mode 100644
index 0000000..9fec5d3
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc476_modules.lds
@@ -0,0 +1,15 @@
+SECTIONS
+{
+	.text : ALIGN(4096)
+	{
+		*(.text .text.* .fixup)
+	}
+	.init.text : ALIGN(4096)
+	{
+		*(.init.text .init.text.*)
+	}
+	.exit.text : ALIGN(4096)
+	{
+		*(.exit.text .exit.text.*)
+	}
+}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index c17aae8..f442120 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -38,6 +38,15 @@ config C293_PCIE
 	  help
 	  This option enables support for the C293PCIE board
 
+config BSC9132_QDS
+	bool "Freescale BSC9132QDS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Freescale BSC9132 QDS board.
+	  BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores
+	  and dual StarCore SC3850 DSP cores.
+	  Manufacturer : Freescale Semiconductor, Inc
+
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
 	select DEFAULT_UIMAGE
@@ -117,11 +126,11 @@ config P1022_RDK
 	  This option enables support for the Freescale / iVeia P1022RDK
 	  reference board.
 
-config P1023_RDS
-	bool "Freescale P1023 RDS/RDB"
+config P1023_RDB
+	bool "Freescale P1023 RDB"
 	select DEFAULT_UIMAGE
 	help
-	  This option enables support for the P1023 RDS and RDB boards
+	  This option enables support for the P1023 RDB board.
 
 config TWR_P102x
 	bool "Freescale TWR-P102x"
@@ -263,11 +272,11 @@ config CORENET_GENERIC
 	help
 	  This option enables support for the FSL CoreNet based boards.
 	  For 32bit kernel, the following boards are supported:
-	    P2041 RDB, P3041 DS and P4080 DS
+	    P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080
 	  For 64bit kernel, the following boards are supported:
 	    T4240 QDS and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
-	    P5020 DS and P5040 DS
+	    P5020 DS, P5040 DS and T104xQDS
 
 endif # FSL_SOC_BOOKE
 
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 25cebe7..7303260 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o
 obj-y += common.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
 obj-$(CONFIG_C293_PCIE)   += c293pcie.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
@@ -17,7 +18,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
-obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
+obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
 obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
 obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c
new file mode 100644
index 0000000..f0927e5
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c
@@ -0,0 +1,74 @@
+/*
+ * BSC913xQDS Board Setup
+ *
+ * Author:
+ *   Harninder Rai <harninder.rai@freescale.com>
+ *   Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+#include "smp.h"
+
+void __init bsc913x_qds_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+	  MPIC_SINGLE_DEST_CPU,
+	  0, 256, " OpenPIC  ");
+
+	if (!mpic)
+		pr_err("bsc913x: Failed to allocate MPIC structure\n");
+	else
+		mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_qds_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("bsc913x_qds_setup_arch()", 0);
+
+#if defined(CONFIG_SMP)
+	mpc85xx_smp_init();
+#endif
+
+	pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9132_qds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,bsc9132qds");
+}
+
+define_machine(bsc9132_qds) {
+	.name			= "BSC9132 QDS",
+	.probe			= bsc9132_qds_probe,
+	.setup_arch		= bsc913x_qds_setup_arch,
+	.init_IRQ		= bsc913x_qds_pic_init,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 8e4b1e1..5db1e11 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -67,7 +67,7 @@ void __init corenet_gen_setup_arch(void)
 
 	swiotlb_detect_4g();
 
-	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+	pr_info("%s board\n", ppc_md.name);
 
 	mpc85xx_qe_init();
 }
@@ -115,6 +115,7 @@ int __init corenet_gen_publish_devices(void)
 static const char * const boards[] __initconst = {
 	"fsl,P2041RDB",
 	"fsl,P3041DS",
+	"fsl,OCA4080",
 	"fsl,P4080DS",
 	"fsl,P5020DS",
 	"fsl,P5040DS",
@@ -122,12 +123,16 @@ static const char * const boards[] __initconst = {
 	"fsl,B4860QDS",
 	"fsl,B4420QDS",
 	"fsl,B4220QDS",
+	"fsl,T1040QDS",
+	"fsl,T1042QDS",
+	"keymile,kmcoge4",
 	NULL
 };
 
 static const char * const hv_boards[] __initconst = {
 	"fsl,P2041RDB-hv",
 	"fsl,P3041DS-hv",
+	"fsl,OCA4080-hv",
 	"fsl,P4080DS-hv",
 	"fsl,P5020DS-hv",
 	"fsl,P5040DS-hv",
@@ -135,6 +140,8 @@ static const char * const hv_boards[] __initconst = {
 	"fsl,B4860QDS-hv",
 	"fsl,B4420QDS-hv",
 	"fsl,B4220QDS-hv",
+	"fsl,T1040QDS-hv",
+	"fsl,T1042QDS-hv",
 	NULL
 };
 
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rdb.c
index 0e61400..d5b7509 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rdb.c
@@ -4,7 +4,7 @@
  * Author: Roy Zang <tie-fei.zang@freescale.com>
  *
  * Description:
- * P1023 RDS Board Setup
+ * P1023 RDB Board Setup
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -41,12 +41,12 @@
  * Setup the architecture
  *
  */
-static void __init mpc85xx_rds_setup_arch(void)
+static void __init mpc85xx_rdb_setup_arch(void)
 {
 	struct device_node *np;
 
 	if (ppc_md.progress)
-		ppc_md.progress("p1023_rds_setup_arch()", 0);
+		ppc_md.progress("p1023_rdb_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
@@ -85,10 +85,9 @@ static void __init mpc85xx_rds_setup_arch(void)
 	fsl_pci_assign_primary();
 }
 
-machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
 
-static void __init mpc85xx_rds_pic_init(void)
+static void __init mpc85xx_rdb_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 		MPIC_SINGLE_DEST_CPU,
@@ -99,14 +98,6 @@ static void __init mpc85xx_rds_pic_init(void)
 	mpic_init(mpic);
 }
 
-static int __init p1023_rds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	return of_flat_dt_is_compatible(root, "fsl,P1023RDS");
-
-}
-
 static int __init p1023_rdb_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -115,26 +106,11 @@ static int __init p1023_rdb_probe(void)
 
 }
 
-define_machine(p1023_rds) {
-	.name			= "P1023 RDS",
-	.probe			= p1023_rds_probe,
-	.setup_arch		= mpc85xx_rds_setup_arch,
-	.init_IRQ		= mpc85xx_rds_pic_init,
-	.get_irq		= mpic_get_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
-#endif
-};
-
 define_machine(p1023_rdb) {
 	.name			= "P1023 RDB",
 	.probe			= p1023_rdb_probe,
-	.setup_arch		= mpc85xx_rds_setup_arch,
-	.init_IRQ		= mpc85xx_rds_pic_init,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6382098..ba093f5 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
 #include <asm/fsl_guts.h>
+#include <asm/code-patching.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
@@ -267,7 +268,7 @@ out:
 	flush_spin_table(spin_table);
 	out_be32(&spin_table->pir, hw_cpu);
 	out_be64((u64 *)(&spin_table->addr_h),
-	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
+		__pa(ppc_function_entry(generic_secondary_smp_init)));
 	flush_spin_table(spin_table);
 #endif
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index d9e2b19..43b65ad 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -422,6 +422,7 @@ config CPU_BIG_ENDIAN
 
 config CPU_LITTLE_ENDIAN
 	bool "Build little endian kernel"
+	select PPC64_BOOT_WRAPPER
 	help
 	  Build a little endian kernel.
 
@@ -430,3 +431,7 @@ config CPU_LITTLE_ENDIAN
 	  little endian powerpc.
 
 endchoice
+
+config PPC64_BOOT_WRAPPER
+	def_bool n
+	depends on CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 90745ea..c8017a7 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -40,6 +40,7 @@
 #include <asm/firmware.h>
 #include <asm/rtas.h>
 #include <asm/cputhreads.h>
+#include <asm/code-patching.h>
 
 #include "interrupt.h"
 #include <asm/udbg.h>
@@ -70,8 +71,8 @@ static cpumask_t of_spin_map;
 static inline int smp_startup_cpu(unsigned int lcpu)
 {
 	int status;
-	unsigned long start_here = __pa((u32)*((unsigned long *)
-					       generic_secondary_smp_init));
+	unsigned long start_here =
+			__pa(ppc_function_entry(generic_secondary_smp_init));
 	unsigned int pcpu;
 	int start_cpu;
 
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 2a7024d..a25f496 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -65,6 +65,7 @@ config MVME5100
 	select PPC_INDIRECT_PCI
 	select PPC_I8259
 	select PPC_NATIVE
+	select PPC_UDBG_16550
 	help
 	  This option enables support for the Motorola (now Emerson) MVME5100
 	  board.
diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S
index 56f45ad..81ab555 100644
--- a/arch/powerpc/platforms/pasemi/powersave.S
+++ b/arch/powerpc/platforms/pasemi/powersave.S
@@ -66,7 +66,7 @@ sleep_common:
 	std	r3, 48(r1)
 
 	/* Only do power savings when in astate 0 */
-	bl	.check_astate
+	bl	check_astate
 	cmpwi	r3,0
 	bne	1f
 
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 63cebb9..4ad0d34 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,7 +1,7 @@
 obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
 obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
-obj-y			+= opal-msglog.o
+obj-y			+= opal-msglog.o subcore.o subcore-asm.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 5b51079..753f08e 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -42,11 +42,19 @@ static int ioda_eeh_event(struct notifier_block *nb,
 {
 	uint64_t changed_evts = (uint64_t)change;
 
-	/* We simply send special EEH event */
-	if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
-	    (events & OPAL_EVENT_PCI_ERROR) &&
-	    eeh_enabled())
+	/*
+	 * We simply send special EEH event if EEH has
+	 * been enabled, or clear pending events in
+	 * case that we enable EEH soon
+	 */
+	if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
+	    !(events & OPAL_EVENT_PCI_ERROR))
+		return 0;
+
+	if (eeh_enabled())
 		eeh_send_failure_event(NULL);
+	else
+		opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
 
 	return 0;
 }
@@ -141,7 +149,9 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 	}
 
 #ifdef CONFIG_DEBUG_FS
-	if (phb->dbgfs) {
+	if (!phb->has_dbgfs && phb->dbgfs) {
+		phb->has_dbgfs = 1;
+
 		debugfs_create_file("err_injct_outbound", 0600,
 				    phb->dbgfs, hose,
 				    &ioda_eeh_outb_dbgfs_ops);
@@ -154,7 +164,14 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 	}
 #endif
 
-	phb->eeh_state |= PNV_EEH_STATE_ENABLED;
+	/* If EEH is enabled, we're going to rely on that.
+	 * Otherwise, we restore to conventional mechanism
+	 * to clear frozen PE during PCI config access.
+	 */
+	if (eeh_enabled())
+		phb->flags |= PNV_PHB_FLAG_EEH;
+	else
+		phb->flags &= ~PNV_PHB_FLAG_EEH;
 
 	return 0;
 }
@@ -268,6 +285,21 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
 		return EEH_STATE_NOT_SUPPORT;
 	}
 
+	/*
+	 * If we're in middle of PE reset, return normal
+	 * state to keep EEH core going. For PHB reset, we
+	 * still expect to have fenced PHB cleared with
+	 * PHB reset.
+	 */
+	if (!(pe->type & EEH_PE_PHB) &&
+	    (pe->state & EEH_PE_RESET)) {
+		result = (EEH_STATE_MMIO_ACTIVE |
+			  EEH_STATE_DMA_ACTIVE |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		return result;
+	}
+
 	/* Retrieve PE status through OPAL */
 	pe_no = pe->addr;
 	ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
@@ -347,52 +379,6 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
 	return result;
 }
 
-static int ioda_eeh_pe_clear(struct eeh_pe *pe)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	u32 pe_no;
-	u8 fstate;
-	u16 pcierr;
-	s64 ret;
-
-	pe_no = pe->addr;
-	hose = pe->phb;
-	phb = pe->phb->private_data;
-
-	/* Clear the EEH error on the PE */
-	ret = opal_pci_eeh_freeze_clear(phb->opal_id,
-			pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-	if (ret) {
-		pr_err("%s: Failed to clear EEH error for "
-		       "PHB#%x-PE#%x, err=%lld\n",
-		       __func__, hose->global_number, pe_no, ret);
-		return -EIO;
-	}
-
-	/*
-	 * Read the PE state back and verify that the frozen
-	 * state has been removed.
-	 */
-	ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
-			&fstate, &pcierr, NULL);
-	if (ret) {
-		pr_err("%s: Failed to get EEH status on "
-		       "PHB#%x-PE#%x\n, err=%lld\n",
-		       __func__, hose->global_number, pe_no, ret);
-		return -EIO;
-	}
-
-	if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) {
-		pr_err("%s: Frozen state not cleared on "
-		       "PHB#%x-PE#%x, sts=%x\n",
-		       __func__, hose->global_number, pe_no, fstate);
-		return -EIO;
-	}
-
-	return 0;
-}
-
 static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
 {
 	s64 rc = OPAL_HARDWARE;
@@ -402,13 +388,16 @@ static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
 		if (rc <= 0)
 			break;
 
-		msleep(rc);
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * rc);
+		else
+			msleep(rc);
 	}
 
 	return rc;
 }
 
-static int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
+int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
 {
 	struct pnv_phb *phb = hose->private_data;
 	s64 rc = OPAL_HARDWARE;
@@ -431,9 +420,17 @@ static int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
 
 	/*
 	 * Poll state of the PHB until the request is done
-	 * successfully.
+	 * successfully. The PHB reset is usually PHB complete
+	 * reset followed by hot reset on root bus. So we also
+	 * need the PCI bus settlement delay.
 	 */
 	rc = ioda_eeh_phb_poll(phb);
+	if (option == EEH_RESET_DEACTIVATE) {
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+		else
+			msleep(EEH_PE_RST_SETTLE_TIME);
+	}
 out:
 	if (rc != OPAL_SUCCESS)
 		return -EIO;
@@ -471,6 +468,8 @@ static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
 
 	/* Poll state of the PHB until the request is done */
 	rc = ioda_eeh_phb_poll(phb);
+	if (option == EEH_RESET_DEACTIVATE)
+		msleep(EEH_PE_RST_SETTLE_TIME);
 out:
 	if (rc != OPAL_SUCCESS)
 		return -EIO;
@@ -478,32 +477,71 @@ out:
 	return 0;
 }
 
-static int ioda_eeh_bridge_reset(struct pci_controller *hose,
-		struct pci_dev *dev, int option)
+static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option)
+
 {
-	u16 ctrl;
+	struct device_node *dn = pci_device_to_OF_node(dev);
+	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	int aer = edev ? edev->aer_cap : 0;
+	u32 ctrl;
 
-	pr_debug("%s: Reset device %04x:%02x:%02x.%01x with option %d\n",
-		 __func__, hose->global_number, dev->bus->number,
-		 PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), option);
+	pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
+		 __func__, pci_domain_nr(dev->bus),
+		 dev->bus->number, option);
 
 	switch (option) {
 	case EEH_RESET_FUNDAMENTAL:
 	case EEH_RESET_HOT:
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+		/* Don't report linkDown event */
+		if (aer) {
+			eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl |= PCI_ERR_UNC_SURPDN;
+                        eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
+                }
+
+		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
 		ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+		eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
+		msleep(EEH_PE_RST_HOLD_TIME);
+
 		break;
 	case EEH_RESET_DEACTIVATE:
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
 		ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+		eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
+		/* Continue reporting linkDown event */
+		if (aer) {
+			eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl &= ~PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
+		}
+
 		break;
 	}
 
 	return 0;
 }
 
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+
+	if (pci_is_root_bus(dev->bus)) {
+		hose = pci_bus_to_host(dev->bus);
+		ioda_eeh_root_reset(hose, EEH_RESET_HOT);
+		ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+	} else {
+		ioda_eeh_bridge_reset(dev, EEH_RESET_HOT);
+		ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+	}
+}
+
 /**
  * ioda_eeh_reset - Reset the indicated PE
  * @pe: EEH PE
@@ -523,27 +561,18 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
 	int ret;
 
 	/*
-	 * Anyway, we have to clear the problematic state for the
-	 * corresponding PE. However, we needn't do it if the PE
-	 * is PHB associated. That means the PHB is having fatal
-	 * errors and it needs reset. Further more, the AIB interface
-	 * isn't reliable any more.
-	 */
-	if (!(pe->type & EEH_PE_PHB) &&
-	    (option == EEH_RESET_HOT ||
-	    option == EEH_RESET_FUNDAMENTAL)) {
-		ret = ioda_eeh_pe_clear(pe);
-		if (ret)
-			return -EIO;
-	}
-
-	/*
-	 * The rules applied to reset, either fundamental or hot reset:
+	 * For PHB reset, we always have complete reset. For those PEs whose
+	 * primary bus derived from root complex (root bus) or root port
+	 * (usually bus#1), we apply hot or fundamental reset on the root port.
+	 * For other PEs, we always have hot reset on the PE primary bus.
 	 *
-	 * We always reset the direct upstream bridge of the PE. If the
-	 * direct upstream bridge isn't root bridge, we always take hot
-	 * reset no matter what option (fundamental or hot) is. Otherwise,
-	 * we should do the reset according to the required option.
+	 * Here, we have different design to pHyp, which always clear the
+	 * frozen state during PE reset. However, the good idea here from
+	 * benh is to keep frozen state before we get PE reset done completely
+	 * (until BAR restore). With the frozen state, HW drops illegal IO
+	 * or MMIO access, which can incur recrusive frozen PE during PE
+	 * reset. The side effect is that EEH core has to clear the frozen
+	 * state explicitly after BAR restore.
 	 */
 	if (pe->type & EEH_PE_PHB) {
 		ret = ioda_eeh_phb_reset(hose, option);
@@ -553,7 +582,7 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
 		    pci_is_root_bus(bus->parent))
 			ret = ioda_eeh_root_reset(hose, option);
 		else
-			ret = ioda_eeh_bridge_reset(hose, bus->self, option);
+			ret = ioda_eeh_bridge_reset(bus->self, option);
 	}
 
 	return ret;
@@ -640,22 +669,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
 	}
 }
 
-static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
-			       struct eeh_pe **pe)
-{
-	struct eeh_pe *phb_pe;
-
-	phb_pe = eeh_phb_pe_get(hose);
-	if (!phb_pe) {
-		pr_warning("%s Can't find PE for PHB#%d\n",
-			   __func__, hose->global_number);
-		return -EEXIST;
-	}
-
-	*pe = phb_pe;
-	return 0;
-}
-
 static int ioda_eeh_get_pe(struct pci_controller *hose,
 			   u16 pe_no, struct eeh_pe **pe)
 {
@@ -663,7 +676,8 @@ static int ioda_eeh_get_pe(struct pci_controller *hose,
 	struct eeh_dev dev;
 
 	/* Find the PHB PE */
-	if (ioda_eeh_get_phb_pe(hose, &phb_pe))
+	phb_pe = eeh_phb_pe_get(hose);
+	if (!phb_pe)
 		return -EEXIST;
 
 	/* Find the PE according to PE# */
@@ -691,6 +705,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
+	struct eeh_pe *phb_pe;
 	u64 frozen_pe_no;
 	u16 err_type, severity;
 	long rc;
@@ -707,10 +722,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 	list_for_each_entry(hose, &hose_list, list_node) {
 		/*
 		 * If the subordinate PCI buses of the PHB has been
-		 * removed, we needn't take care of it any more.
+		 * removed or is exactly under error recovery, we
+		 * needn't take care of it any more.
 		 */
 		phb = hose->private_data;
-		if (phb->eeh_state & PNV_EEH_STATE_REMOVED)
+		phb_pe = eeh_phb_pe_get(hose);
+		if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
 			continue;
 
 		rc = opal_pci_next_error(phb->opal_id,
@@ -743,12 +760,6 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 		switch (err_type) {
 		case OPAL_EEH_IOC_ERROR:
 			if (severity == OPAL_EEH_SEV_IOC_DEAD) {
-				list_for_each_entry(hose, &hose_list,
-						    list_node) {
-					phb = hose->private_data;
-					phb->eeh_state |= PNV_EEH_STATE_REMOVED;
-				}
-
 				pr_err("EEH: dead IOC detected\n");
 				ret = EEH_NEXT_ERR_DEAD_IOC;
 			} else if (severity == OPAL_EEH_SEV_INF) {
@@ -761,17 +772,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 			break;
 		case OPAL_EEH_PHB_ERROR:
 			if (severity == OPAL_EEH_SEV_PHB_DEAD) {
-				if (ioda_eeh_get_phb_pe(hose, pe))
-					break;
-
+				*pe = phb_pe;
 				pr_err("EEH: dead PHB#%x detected\n",
 					hose->global_number);
-				phb->eeh_state |= PNV_EEH_STATE_REMOVED;
 				ret = EEH_NEXT_ERR_DEAD_PHB;
 			} else if (severity == OPAL_EEH_SEV_PHB_FENCED) {
-				if (ioda_eeh_get_phb_pe(hose, pe))
-					break;
-
+				*pe = phb_pe;
 				pr_err("EEH: fenced PHB#%x detected\n",
 					hose->global_number);
 				ret = EEH_NEXT_ERR_FENCED_PHB;
@@ -789,17 +795,21 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 			 * If we can't find the corresponding PE, the
 			 * PEEV / PEST would be messy. So we force an
 			 * fenced PHB so that it can be recovered.
+			 *
+			 * If the PE has been marked as isolated, that
+			 * should have been removed permanently or in
+			 * progress with recovery. We needn't report
+			 * it again.
 			 */
 			if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) {
-				if (!ioda_eeh_get_phb_pe(hose, pe)) {
-					pr_err("EEH: Escalated fenced PHB#%x "
-					       "detected for PE#%llx\n",
-						hose->global_number,
-						frozen_pe_no);
-					ret = EEH_NEXT_ERR_FENCED_PHB;
-				} else {
-					ret = EEH_NEXT_ERR_NONE;
-				}
+				*pe = phb_pe;
+				pr_err("EEH: Escalated fenced PHB#%x "
+				       "detected for PE#%llx\n",
+					hose->global_number,
+					frozen_pe_no);
+				ret = EEH_NEXT_ERR_FENCED_PHB;
+			} else if ((*pe)->state & EEH_PE_ISOLATED) {
+				ret = EEH_NEXT_ERR_NONE;
 			} else {
 				pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
 					(*pe)->addr, (*pe)->phb->global_number);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index a59788e..56a206f 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -126,6 +126,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	edev->mode	&= 0xFFFFFF00;
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
 		edev->mode |= EEH_DEV_BRIDGE;
+	edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
 	if (pci_is_pcie(dev)) {
 		edev->pcie_cap = pci_pcie_cap(dev);
 
@@ -133,6 +134,9 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 			edev->mode |= EEH_DEV_ROOT_PORT;
 		else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
 			edev->mode |= EEH_DEV_DS_PORT;
+
+		edev->aer_cap = pci_find_ext_capability(dev,
+							PCI_EXT_CAP_ID_ERR);
 	}
 
 	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c
index dc487ff..5c21d9c 100644
--- a/arch/powerpc/platforms/powernv/opal-flash.c
+++ b/arch/powerpc/platforms/powernv/opal-flash.c
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
+#include <linux/delay.h>
 
 #include <asm/opal.h>
 
@@ -130,7 +131,8 @@ static inline void opal_flash_validate(void)
 {
 	long ret;
 	void *buf = validate_flash_data.buf;
-	__be32 size, result;
+	__be32 size = cpu_to_be32(validate_flash_data.buf_size);
+	__be32 result;
 
 	ret = opal_validate_flash(__pa(buf), &size, &result);
 
@@ -290,11 +292,6 @@ static int opal_flash_update(int op)
 	/* First entry address */
 	addr = __pa(list);
 
-	pr_alert("FLASH: Image is %u bytes\n", image_data.size);
-	pr_alert("FLASH: Image update requested\n");
-	pr_alert("FLASH: Image will be updated during system reboot\n");
-	pr_alert("FLASH: This will take several minutes. Do not power off!\n");
-
 flash:
 	rc = opal_update_flash(addr);
 
@@ -302,6 +299,47 @@ invalid_img:
 	return rc;
 }
 
+/* Return CPUs to OPAL before starting FW update */
+static void flash_return_cpu(void *info)
+{
+	int cpu = smp_processor_id();
+
+	if (!cpu_online(cpu))
+		return;
+
+	/* Disable IRQ */
+	hard_irq_disable();
+
+	/* Return the CPU to OPAL */
+	opal_return_cpu();
+}
+
+/* This gets called just before system reboots */
+void opal_flash_term_callback(void)
+{
+	struct cpumask mask;
+
+	if (update_flash_data.status != FLASH_IMG_READY)
+		return;
+
+	pr_alert("FLASH: Flashing new firmware\n");
+	pr_alert("FLASH: Image is %u bytes\n", image_data.size);
+	pr_alert("FLASH: Performing flash and reboot/shutdown\n");
+	pr_alert("FLASH: This will take several minutes. Do not power off!\n");
+
+	/* Small delay to help getting the above message out */
+	msleep(500);
+
+	/* Return secondary CPUs to firmware */
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	if (!cpumask_empty(&mask))
+		smp_call_function_many(&mask,
+				       flash_return_cpu, NULL, false);
+	/* Hard disable interrupts */
+	hard_irq_disable();
+}
+
 /*
  * Show candidate image status
  */
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 79d83ca..f04b4d8 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -12,12 +12,17 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/xics.h>
 #include <asm/opal.h>
 #include <asm/prom.h>
+#include <asm/uaccess.h>
+#include <asm/debug.h>
 
 static int opal_lpc_chip_id = -1;
 
@@ -176,6 +181,152 @@ static const struct ppc_pci_io opal_lpc_io = {
 	.outsl	= opal_lpc_outsl,
 };
 
+#ifdef CONFIG_DEBUG_FS
+struct lpc_debugfs_entry {
+	enum OpalLPCAddressType lpc_type;
+};
+
+static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
+			      size_t count, loff_t *ppos)
+{
+	struct lpc_debugfs_entry *lpc = filp->private_data;
+	u32 data, pos, len, todo;
+	int rc;
+
+	if (!access_ok(VERIFY_WRITE, ubuf, count))
+		return -EFAULT;
+
+	todo = count;
+	while (todo) {
+		pos = *ppos;
+
+		/*
+		 * Select access size based on count and alignment and
+		 * access type. IO and MEM only support byte acceses,
+		 * FW supports all 3.
+		 */
+		len = 1;
+		if (lpc->lpc_type == OPAL_LPC_FW) {
+			if (todo > 3 && (pos & 3) == 0)
+				len = 4;
+			else if (todo > 1 && (pos & 1) == 0)
+				len = 2;
+		}
+		rc = opal_lpc_read(opal_lpc_chip_id, lpc->lpc_type, pos,
+				   &data, len);
+		if (rc)
+			return -ENXIO;
+		switch(len) {
+		case 4:
+			rc = __put_user((u32)data, (u32 __user *)ubuf);
+			break;
+		case 2:
+			rc = __put_user((u16)data, (u16 __user *)ubuf);
+			break;
+		default:
+			rc = __put_user((u8)data, (u8 __user *)ubuf);
+			break;
+		}
+		if (rc)
+			return -EFAULT;
+		*ppos += len;
+		ubuf += len;
+		todo -= len;
+	}
+
+	return count;
+}
+
+static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf,
+			       size_t count, loff_t *ppos)
+{
+	struct lpc_debugfs_entry *lpc = filp->private_data;
+	u32 data, pos, len, todo;
+	int rc;
+
+	if (!access_ok(VERIFY_READ, ubuf, count))
+		return -EFAULT;
+
+	todo = count;
+	while (todo) {
+		pos = *ppos;
+
+		/*
+		 * Select access size based on count and alignment and
+		 * access type. IO and MEM only support byte acceses,
+		 * FW supports all 3.
+		 */
+		len = 1;
+		if (lpc->lpc_type == OPAL_LPC_FW) {
+			if (todo > 3 && (pos & 3) == 0)
+				len = 4;
+			else if (todo > 1 && (pos & 1) == 0)
+				len = 2;
+		}
+		switch(len) {
+		case 4:
+			rc = __get_user(data, (u32 __user *)ubuf);
+			break;
+		case 2:
+			rc = __get_user(data, (u16 __user *)ubuf);
+			break;
+		default:
+			rc = __get_user(data, (u8 __user *)ubuf);
+			break;
+		}
+		if (rc)
+			return -EFAULT;
+
+		rc = opal_lpc_write(opal_lpc_chip_id, lpc->lpc_type, pos,
+				    data, len);
+		if (rc)
+			return -ENXIO;
+		*ppos += len;
+		ubuf += len;
+		todo -= len;
+	}
+
+	return count;
+}
+
+static const struct file_operations lpc_fops = {
+	.read =		lpc_debug_read,
+	.write =	lpc_debug_write,
+	.open =		simple_open,
+	.llseek =	default_llseek,
+};
+
+static int opal_lpc_debugfs_create_type(struct dentry *folder,
+					const char *fname,
+					enum OpalLPCAddressType type)
+{
+	struct lpc_debugfs_entry *entry;
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+	entry->lpc_type = type;
+	debugfs_create_file(fname, 0600, folder, entry, &lpc_fops);
+	return 0;
+}
+
+static int opal_lpc_init_debugfs(void)
+{
+	struct dentry *root;
+	int rc = 0;
+
+	if (opal_lpc_chip_id < 0)
+		return -ENODEV;
+
+	root = debugfs_create_dir("lpc", powerpc_debugfs_root);
+
+	rc |= opal_lpc_debugfs_create_type(root, "io", OPAL_LPC_IO);
+	rc |= opal_lpc_debugfs_create_type(root, "mem", OPAL_LPC_MEM);
+	rc |= opal_lpc_debugfs_create_type(root, "fw", OPAL_LPC_FW);
+	return rc;
+}
+device_initcall(opal_lpc_init_debugfs);
+#endif  /* CONFIG_DEBUG_FS */
+
 void opal_lpc_init(void)
 {
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c
index ec413223..b17a34b 100644
--- a/arch/powerpc/platforms/powernv/opal-memory-errors.c
+++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c
@@ -47,12 +47,12 @@ static void handle_memory_error_event(struct OpalMemoryErrorData *merr_evt)
 		  __func__, merr_evt->type);
 	switch (merr_evt->type) {
 	case OPAL_MEM_ERR_TYPE_RESILIENCE:
-		paddr_start = merr_evt->u.resilience.physical_address_start;
-		paddr_end = merr_evt->u.resilience.physical_address_end;
+		paddr_start = be64_to_cpu(merr_evt->u.resilience.physical_address_start);
+		paddr_end = be64_to_cpu(merr_evt->u.resilience.physical_address_end);
 		break;
 	case OPAL_MEM_ERR_TYPE_DYN_DALLOC:
-		paddr_start = merr_evt->u.dyn_dealloc.physical_address_start;
-		paddr_end = merr_evt->u.dyn_dealloc.physical_address_end;
+		paddr_start = be64_to_cpu(merr_evt->u.dyn_dealloc.physical_address_start);
+		paddr_end = be64_to_cpu(merr_evt->u.dyn_dealloc.physical_address_end);
 		break;
 	default:
 		return;
diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S
index 3cd2628..11a3169 100644
--- a/arch/powerpc/platforms/powernv/opal-takeover.S
+++ b/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -21,11 +21,13 @@
 _GLOBAL(opal_query_takeover)
 	mfcr	r0
 	stw	r0,8(r1)
+	stdu	r1,-STACKFRAMESIZE(r1)
 	std	r3,STK_PARAM(R3)(r1)
 	std	r4,STK_PARAM(R4)(r1)
 	li	r3,H_HAL_TAKEOVER
 	li	r4,H_HAL_TAKEOVER_QUERY_MAGIC
 	HVSC
+	addi	r1,r1,STACKFRAMESIZE
 	ld	r10,STK_PARAM(R3)(r1)
 	std	r4,0(r10)
 	ld	r10,STK_PARAM(R4)(r1)
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index f531ffe..4abbff2 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
 	std	r12,PACASAVEDMSR(r13);	\
 	andc	r12,r12,r0;		\
 	mtmsrd	r12,1;			\
-	LOAD_REG_ADDR(r0,.opal_return);	\
+	LOAD_REG_ADDR(r0,opal_return);	\
 	mtlr	r0;			\
 	li	r0,MSR_DR|MSR_IR|MSR_LE;\
 	andc	r12,r12,r0;		\
@@ -44,7 +44,7 @@
 	mtspr	SPRN_HSRR0,r12;		\
 	hrfid
 
-_STATIC(opal_return)
+opal_return:
 	/*
 	 * Fixup endian on OPAL return... we should be able to simplify
 	 * this by instead converting the below trampoline to a set of
@@ -124,6 +124,7 @@ OPAL_CALL(opal_xscom_write,			OPAL_XSCOM_WRITE);
 OPAL_CALL(opal_lpc_read,			OPAL_LPC_READ);
 OPAL_CALL(opal_lpc_write,			OPAL_LPC_WRITE);
 OPAL_CALL(opal_return_cpu,			OPAL_RETURN_CPU);
+OPAL_CALL(opal_reinit_cpus,			OPAL_REINIT_CPUS);
 OPAL_CALL(opal_read_elog,			OPAL_ELOG_READ);
 OPAL_CALL(opal_send_ack_elog,			OPAL_ELOG_ACK);
 OPAL_CALL(opal_get_elog_size,			OPAL_ELOG_SIZE);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index f343183..1999756 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -57,6 +57,21 @@ static DEFINE_SPINLOCK(opal_notifier_lock);
 static uint64_t last_notified_mask = 0x0ul;
 static atomic_t opal_notifier_hold = ATOMIC_INIT(0);
 
+static void opal_reinit_cores(void)
+{
+	/* Do the actual re-init, This will clobber all FPRs, VRs, etc...
+	 *
+	 * It will preserve non volatile GPRs and HSPRG0/1. It will
+	 * also restore HIDs and other SPRs to their original value
+	 * but it might clobber a bunch.
+	 */
+#ifdef __BIG_ENDIAN__
+	opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
+#else
+	opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE);
+#endif
+}
+
 int __init early_init_dt_scan_opal(unsigned long node,
 				   const char *uname, int depth, void *data)
 {
@@ -96,6 +111,13 @@ int __init early_init_dt_scan_opal(unsigned long node,
 		printk("OPAL V1 detected !\n");
 	}
 
+	/* Reinit all cores with the right endian */
+	opal_reinit_cores();
+
+	/* Restore some bits */
+	if (cur_cpu_spec->cpu_restore)
+		cur_cpu_spec->cpu_restore();
+
 	return 1;
 }
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 98824aa..de19ede 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/crash_dump.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/string.h>
@@ -663,15 +664,15 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 		 * errors, and on the first pass the data will be a relative
 		 * bus number, print that out instead.
 		 */
-		tbl->it_busno = 0;
 		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
 		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
 				8);
-		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
-			       TCE_PCI_SWINV_PAIR;
+		tbl->it_type |= (TCE_PCI_SWINV_CREATE |
+				 TCE_PCI_SWINV_FREE   |
+				 TCE_PCI_SWINV_PAIR);
 	}
 	iommu_init_table(tbl, phb->hose->node);
-	iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
+	iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
 
 	if (pe->pdev)
 		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
@@ -793,14 +794,13 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		 * errors, and on the first pass the data will be a relative
 		 * bus number, print that out instead.
 		 */
-		tbl->it_busno = 0;
 		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
 		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
 				8);
-		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+		tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
 	}
 	iommu_init_table(tbl, phb->hose->node);
-	iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
+	iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
 
 	if (pe->pdev)
 		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
@@ -1386,12 +1386,24 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
 	ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
+	ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
 	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
 
 	/* Reset IODA tables to a clean state */
 	rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
 	if (rc)
 		pr_warning("  OPAL Error %ld performing IODA table reset !\n", rc);
+
+	/* If we're running in kdump kerenl, the previous kerenl never
+	 * shutdown PCI devices correctly. We already got IODA table
+	 * cleaned out. So we have to issue PHB reset to stop all PCI
+	 * transactions from previous kerenl.
+	 */
+	if (is_kdump_kernel()) {
+		pr_info("  Issue PHB reset ...\n");
+		ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
+		ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET);
+	}
 }
 
 void __init pnv_pci_init_ioda2_phb(struct device_node *np)
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 8518817..eefbfcc 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -131,65 +131,60 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
 	int i;
 
 	data = (struct OpalIoP7IOCPhbErrorData *)common;
-	pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n",
+	pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n",
 		hose->global_number, common->version);
 
 	if (data->brdgCtl)
-		pr_info("  brdgCtl:     %08x\n",
+		pr_info("brdgCtl:     %08x\n",
 			data->brdgCtl);
 	if (data->portStatusReg || data->rootCmplxStatus ||
 	    data->busAgentStatus)
-		pr_info("  UtlSts:      %08x %08x %08x\n",
+		pr_info("UtlSts:      %08x %08x %08x\n",
 			data->portStatusReg, data->rootCmplxStatus,
 			data->busAgentStatus);
 	if (data->deviceStatus || data->slotStatus   ||
 	    data->linkStatus   || data->devCmdStatus ||
 	    data->devSecStatus)
-		pr_info("  RootSts:     %08x %08x %08x %08x %08x\n",
+		pr_info("RootSts:     %08x %08x %08x %08x %08x\n",
 			data->deviceStatus, data->slotStatus,
 			data->linkStatus, data->devCmdStatus,
 			data->devSecStatus);
 	if (data->rootErrorStatus   || data->uncorrErrorStatus ||
 	    data->corrErrorStatus)
-		pr_info("  RootErrSts:  %08x %08x %08x\n",
+		pr_info("RootErrSts:  %08x %08x %08x\n",
 			data->rootErrorStatus, data->uncorrErrorStatus,
 			data->corrErrorStatus);
 	if (data->tlpHdr1 || data->tlpHdr2 ||
 	    data->tlpHdr3 || data->tlpHdr4)
-		pr_info("  RootErrLog:  %08x %08x %08x %08x\n",
+		pr_info("RootErrLog:  %08x %08x %08x %08x\n",
 			data->tlpHdr1, data->tlpHdr2,
 			data->tlpHdr3, data->tlpHdr4);
 	if (data->sourceId || data->errorClass ||
 	    data->correlator)
-		pr_info("  RootErrLog1: %08x %016llx %016llx\n",
+		pr_info("RootErrLog1: %08x %016llx %016llx\n",
 			data->sourceId, data->errorClass,
 			data->correlator);
 	if (data->p7iocPlssr || data->p7iocCsr)
-		pr_info("  PhbSts:      %016llx %016llx\n",
+		pr_info("PhbSts:      %016llx %016llx\n",
 			data->p7iocPlssr, data->p7iocCsr);
-	if (data->lemFir || data->lemErrorMask ||
-	    data->lemWOF)
-		pr_info("  Lem:         %016llx %016llx %016llx\n",
+	if (data->lemFir)
+		pr_info("Lem:         %016llx %016llx %016llx\n",
 			data->lemFir, data->lemErrorMask,
 			data->lemWOF);
-	if (data->phbErrorStatus || data->phbFirstErrorStatus ||
-	    data->phbErrorLog0   || data->phbErrorLog1)
-		pr_info("  PhbErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->phbErrorStatus)
+		pr_info("PhbErr:      %016llx %016llx %016llx %016llx\n",
 			data->phbErrorStatus, data->phbFirstErrorStatus,
 			data->phbErrorLog0, data->phbErrorLog1);
-	if (data->mmioErrorStatus || data->mmioFirstErrorStatus ||
-	    data->mmioErrorLog0   || data->mmioErrorLog1)
-		pr_info("  OutErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->mmioErrorStatus)
+		pr_info("OutErr:      %016llx %016llx %016llx %016llx\n",
 			data->mmioErrorStatus, data->mmioFirstErrorStatus,
 			data->mmioErrorLog0, data->mmioErrorLog1);
-	if (data->dma0ErrorStatus || data->dma0FirstErrorStatus ||
-	    data->dma0ErrorLog0   || data->dma0ErrorLog1)
-		pr_info("  InAErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->dma0ErrorStatus)
+		pr_info("InAErr:      %016llx %016llx %016llx %016llx\n",
 			data->dma0ErrorStatus, data->dma0FirstErrorStatus,
 			data->dma0ErrorLog0, data->dma0ErrorLog1);
-	if (data->dma1ErrorStatus || data->dma1FirstErrorStatus ||
-	    data->dma1ErrorLog0   || data->dma1ErrorLog1)
-		pr_info("  InBErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->dma1ErrorStatus)
+		pr_info("InBErr:      %016llx %016llx %016llx %016llx\n",
 			data->dma1ErrorStatus, data->dma1FirstErrorStatus,
 			data->dma1ErrorLog0, data->dma1ErrorLog1);
 
@@ -198,7 +193,7 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
 		    (data->pestB[i] >> 63) == 0)
 			continue;
 
-		pr_info("  PE[%3d] A/B: %016llx %016llx\n",
+		pr_info("PE[%3d] A/B: %016llx %016llx\n",
 			i, data->pestA[i], data->pestB[i]);
 	}
 }
@@ -210,69 +205,63 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
 	int i;
 
 	data = (struct OpalIoPhb3ErrorData*)common;
-	pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n",
+	pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n",
 		hose->global_number, common->version);
 	if (data->brdgCtl)
-		pr_info("  brdgCtl:     %08x\n",
+		pr_info("brdgCtl:     %08x\n",
 			data->brdgCtl);
 	if (data->portStatusReg || data->rootCmplxStatus ||
 	    data->busAgentStatus)
-		pr_info("  UtlSts:      %08x %08x %08x\n",
+		pr_info("UtlSts:      %08x %08x %08x\n",
 			data->portStatusReg, data->rootCmplxStatus,
 			data->busAgentStatus);
 	if (data->deviceStatus || data->slotStatus   ||
 	    data->linkStatus   || data->devCmdStatus ||
 	    data->devSecStatus)
-		pr_info("  RootSts:     %08x %08x %08x %08x %08x\n",
+		pr_info("RootSts:     %08x %08x %08x %08x %08x\n",
 			data->deviceStatus, data->slotStatus,
 			data->linkStatus, data->devCmdStatus,
 			data->devSecStatus);
 	if (data->rootErrorStatus || data->uncorrErrorStatus ||
 	    data->corrErrorStatus)
-		pr_info("  RootErrSts:  %08x %08x %08x\n",
+		pr_info("RootErrSts:  %08x %08x %08x\n",
 			data->rootErrorStatus, data->uncorrErrorStatus,
 			data->corrErrorStatus);
 	if (data->tlpHdr1 || data->tlpHdr2 ||
 	    data->tlpHdr3 || data->tlpHdr4)
-		pr_info("  RootErrLog:  %08x %08x %08x %08x\n",
+		pr_info("RootErrLog:  %08x %08x %08x %08x\n",
 			data->tlpHdr1, data->tlpHdr2,
 			data->tlpHdr3, data->tlpHdr4);
 	if (data->sourceId || data->errorClass ||
 	    data->correlator)
-		pr_info("  RootErrLog1: %08x %016llx %016llx\n",
+		pr_info("RootErrLog1: %08x %016llx %016llx\n",
 			data->sourceId, data->errorClass,
 			data->correlator);
-	if (data->nFir || data->nFirMask ||
-	    data->nFirWOF)
-		pr_info("  nFir:        %016llx %016llx %016llx\n",
+	if (data->nFir)
+		pr_info("nFir:        %016llx %016llx %016llx\n",
 			data->nFir, data->nFirMask,
 			data->nFirWOF);
 	if (data->phbPlssr || data->phbCsr)
-		pr_info("  PhbSts:      %016llx %016llx\n",
+		pr_info("PhbSts:      %016llx %016llx\n",
 			data->phbPlssr, data->phbCsr);
-	if (data->lemFir || data->lemErrorMask ||
-	    data->lemWOF)
-		pr_info("  Lem:         %016llx %016llx %016llx\n",
+	if (data->lemFir)
+		pr_info("Lem:         %016llx %016llx %016llx\n",
 			data->lemFir, data->lemErrorMask,
 			data->lemWOF);
-	if (data->phbErrorStatus || data->phbFirstErrorStatus ||
-	    data->phbErrorLog0   || data->phbErrorLog1)
-		pr_info("  PhbErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->phbErrorStatus)
+		pr_info("PhbErr:      %016llx %016llx %016llx %016llx\n",
 			data->phbErrorStatus, data->phbFirstErrorStatus,
 			data->phbErrorLog0, data->phbErrorLog1);
-	if (data->mmioErrorStatus || data->mmioFirstErrorStatus ||
-	    data->mmioErrorLog0   || data->mmioErrorLog1)
-		pr_info("  OutErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->mmioErrorStatus)
+		pr_info("OutErr:      %016llx %016llx %016llx %016llx\n",
 			data->mmioErrorStatus, data->mmioFirstErrorStatus,
 			data->mmioErrorLog0, data->mmioErrorLog1);
-	if (data->dma0ErrorStatus || data->dma0FirstErrorStatus ||
-	    data->dma0ErrorLog0   || data->dma0ErrorLog1)
-		pr_info("  InAErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->dma0ErrorStatus)
+		pr_info("InAErr:      %016llx %016llx %016llx %016llx\n",
 			data->dma0ErrorStatus, data->dma0FirstErrorStatus,
 			data->dma0ErrorLog0, data->dma0ErrorLog1);
-	if (data->dma1ErrorStatus || data->dma1FirstErrorStatus ||
-	    data->dma1ErrorLog0   || data->dma1ErrorLog1)
-		pr_info("  InBErr:      %016llx %016llx %016llx %016llx\n",
+	if (data->dma1ErrorStatus)
+		pr_info("InBErr:      %016llx %016llx %016llx %016llx\n",
 			data->dma1ErrorStatus, data->dma1FirstErrorStatus,
 			data->dma1ErrorLog0, data->dma1ErrorLog1);
 
@@ -281,7 +270,7 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
 		    (data->pestB[i] >> 63) == 0)
 			continue;
 
-		pr_info("  PE[%3d] A/B: %016llx %016llx\n",
+		pr_info("PE[%3d] A/B: %016llx %016llx\n",
 			i, data->pestA[i], data->pestB[i]);
 	}
 }
@@ -384,9 +373,6 @@ int pnv_pci_cfg_read(struct device_node *dn,
 	struct pci_dn *pdn = PCI_DN(dn);
 	struct pnv_phb *phb = pdn->phb->private_data;
 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
-#ifdef CONFIG_EEH
-	struct eeh_pe *phb_pe = NULL;
-#endif
 	s64 rc;
 
 	switch (size) {
@@ -412,31 +398,9 @@ int pnv_pci_cfg_read(struct device_node *dn,
 	default:
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 	}
+
 	cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
 		__func__, pdn->busno, pdn->devfn, where, size, *val);
-
-	/*
-	 * Check if the specified PE has been put into frozen
-	 * state. On the other hand, we needn't do that while
-	 * the PHB has been put into frozen state because of
-	 * PHB-fatal errors.
-	 */
-#ifdef CONFIG_EEH
-	phb_pe = eeh_phb_pe_get(pdn->phb);
-	if (phb_pe && (phb_pe->state & EEH_PE_ISOLATED))
-		return PCIBIOS_SUCCESSFUL;
-
-	if (phb->eeh_state & PNV_EEH_STATE_ENABLED) {
-		if (*val == EEH_IO_ERROR_VALUE(size) &&
-		    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	} else {
-		pnv_pci_config_check_eeh(phb, dn);
-	}
-#else
-	pnv_pci_config_check_eeh(phb, dn);
-#endif
-
 	return PCIBIOS_SUCCESSFUL;
 }
 
@@ -463,33 +427,74 @@ int pnv_pci_cfg_write(struct device_node *dn,
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 	}
 
-	/* Check if the PHB got frozen due to an error (no response) */
-#ifdef CONFIG_EEH
-	if (!(phb->eeh_state & PNV_EEH_STATE_ENABLED))
-		pnv_pci_config_check_eeh(phb, dn);
-#else
-	pnv_pci_config_check_eeh(phb, dn);
-#endif
-
 	return PCIBIOS_SUCCESSFUL;
 }
 
+#if CONFIG_EEH
+static bool pnv_pci_cfg_check(struct pci_controller *hose,
+			      struct device_node *dn)
+{
+	struct eeh_dev *edev = NULL;
+	struct pnv_phb *phb = hose->private_data;
+
+	/* EEH not enabled ? */
+	if (!(phb->flags & PNV_PHB_FLAG_EEH))
+		return true;
+
+	/* PE reset or device removed ? */
+	edev = of_node_to_eeh_dev(dn);
+	if (edev) {
+		if (edev->pe &&
+		    (edev->pe->state & EEH_PE_RESET))
+			return false;
+
+		if (edev->mode & EEH_DEV_REMOVED)
+			return false;
+	}
+
+	return true;
+}
+#else
+static inline pnv_pci_cfg_check(struct pci_controller *hose,
+				struct device_node *dn)
+{
+	return true;
+}
+#endif /* CONFIG_EEH */
+
 static int pnv_pci_read_config(struct pci_bus *bus,
 			       unsigned int devfn,
 			       int where, int size, u32 *val)
 {
 	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
 	struct pci_dn *pdn;
+	struct pnv_phb *phb;
+	bool found = false;
+	int ret;
 
+	*val = 0xFFFFFFFF;
 	for (dn = busdn->child; dn; dn = dn->sibling) {
 		pdn = PCI_DN(dn);
-		if (pdn && pdn->devfn == devfn)
-			return pnv_pci_cfg_read(dn, where, size, val);
+		if (pdn && pdn->devfn == devfn) {
+			phb = pdn->phb->private_data;
+			found = true;
+			break;
+		}
 	}
 
-	*val = 0xFFFFFFFF;
-	return PCIBIOS_DEVICE_NOT_FOUND;
+	if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	ret = pnv_pci_cfg_read(dn, where, size, val);
+	if (phb->flags & PNV_PHB_FLAG_EEH) {
+		if (*val == EEH_IO_ERROR_VALUE(size) &&
+		    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+                        return PCIBIOS_DEVICE_NOT_FOUND;
+	} else {
+		pnv_pci_config_check_eeh(phb, dn);
+	}
+
+	return ret;
 }
 
 static int pnv_pci_write_config(struct pci_bus *bus,
@@ -498,14 +503,27 @@ static int pnv_pci_write_config(struct pci_bus *bus,
 {
 	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
 	struct pci_dn *pdn;
+	struct pnv_phb *phb;
+	bool found = false;
+	int ret;
 
 	for (dn = busdn->child; dn; dn = dn->sibling) {
 		pdn = PCI_DN(dn);
-		if (pdn && pdn->devfn == devfn)
-			return pnv_pci_cfg_write(dn, where, size, val);
+		if (pdn && pdn->devfn == devfn) {
+			phb = pdn->phb->private_data;
+			found = true;
+			break;
+		}
 	}
 
-	return PCIBIOS_DEVICE_NOT_FOUND;
+	if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	ret = pnv_pci_cfg_write(dn, where, size, val);
+	if (!(phb->flags & PNV_PHB_FLAG_EEH))
+		pnv_pci_config_check_eeh(phb, dn);
+
+	return ret;
 }
 
 struct pci_ops pnv_pci_ops = {
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index cde1694..676232c 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -81,28 +81,27 @@ struct pnv_eeh_ops {
 	int (*configure_bridge)(struct eeh_pe *pe);
 	int (*next_error)(struct eeh_pe **pe);
 };
-
-#define PNV_EEH_STATE_ENABLED	(1 << 0)	/* EEH enabled	*/
-#define PNV_EEH_STATE_REMOVED	(1 << 1)	/* PHB removed	*/
-
 #endif /* CONFIG_EEH */
 
+#define PNV_PHB_FLAG_EEH	(1 << 0)
+
 struct pnv_phb {
 	struct pci_controller	*hose;
 	enum pnv_phb_type	type;
 	enum pnv_phb_model	model;
 	u64			hub_id;
 	u64			opal_id;
+	int			flags;
 	void __iomem		*regs;
 	int			initialized;
 	spinlock_t		lock;
 
 #ifdef CONFIG_EEH
 	struct pnv_eeh_ops	*eeh_ops;
-	int			eeh_state;
 #endif
 
 #ifdef CONFIG_DEBUG_FS
+	int			has_dbgfs;
 	struct dentry		*dbgfs;
 #endif
 
@@ -205,5 +204,7 @@ extern void pnv_pci_init_ioda_hub(struct device_node *np);
 extern void pnv_pci_init_ioda2_phb(struct device_node *np);
 extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
 					__be64 *startp, __be64 *endp, bool rm);
+extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
+extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option);
 
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index 0051e10..75501bf 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -25,4 +25,6 @@ static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 
 extern void pnv_lpc_init(void);
 
+bool cpu_core_split_required(void);
+
 #endif /* _POWERNV_H */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 8723d32..8c16a5f 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/bug.h>
 #include <linux/pci.h>
+#include <linux/cpufreq.h>
 
 #include <asm/machdep.h>
 #include <asm/firmware.h>
@@ -98,11 +99,32 @@ static void pnv_show_cpuinfo(struct seq_file *m)
 	of_node_put(root);
 }
 
+static void pnv_prepare_going_down(void)
+{
+	/*
+	 * Disable all notifiers from OPAL, we can't
+	 * service interrupts anymore anyway
+	 */
+	opal_notifier_disable();
+
+	/* Soft disable interrupts */
+	local_irq_disable();
+
+	/*
+	 * Return secondary CPUs to firwmare if a flash update
+	 * is pending otherwise we will get all sort of error
+	 * messages about CPU being stuck etc.. This will also
+	 * have the side effect of hard disabling interrupts so
+	 * past this point, the kernel is effectively dead.
+	 */
+	opal_flash_term_callback();
+}
+
 static void  __noreturn pnv_restart(char *cmd)
 {
 	long rc = OPAL_BUSY;
 
-	opal_notifier_disable();
+	pnv_prepare_going_down();
 
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_cec_reboot();
@@ -119,7 +141,7 @@ static void __noreturn pnv_power_off(void)
 {
 	long rc = OPAL_BUSY;
 
-	opal_notifier_disable();
+	pnv_prepare_going_down();
 
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_cec_power_down(0);
@@ -222,6 +244,13 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
 }
 #endif /* CONFIG_KEXEC */
 
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+static unsigned long pnv_memory_block_size(void)
+{
+	return 256UL * 1024 * 1024;
+}
+#endif
+
 static void __init pnv_setup_machdep_opal(void)
 {
 	ppc_md.get_boot_time = opal_get_boot_time;
@@ -269,6 +298,25 @@ static int __init pnv_probe(void)
 	return 1;
 }
 
+/*
+ * Returns the cpu frequency for 'cpu' in Hz. This is used by
+ * /proc/cpuinfo
+ */
+unsigned long pnv_get_proc_freq(unsigned int cpu)
+{
+	unsigned long ret_freq;
+
+	ret_freq = cpufreq_quick_get(cpu) * 1000ul;
+
+	/*
+	 * If the backend cpufreq driver does not exist,
+         * then fallback to old way of reporting the clockrate.
+	 */
+	if (!ret_freq)
+		ret_freq = ppc_proc_freq;
+	return ret_freq;
+}
+
 define_machine(powernv) {
 	.name			= "PowerNV",
 	.probe			= pnv_probe,
@@ -276,6 +324,7 @@ define_machine(powernv) {
 	.setup_arch		= pnv_setup_arch,
 	.init_IRQ		= pnv_init_IRQ,
 	.show_cpuinfo		= pnv_show_cpuinfo,
+	.get_proc_freq          = pnv_get_proc_freq,
 	.progress		= pnv_progress,
 	.machine_shutdown	= pnv_shutdown,
 	.power_save             = power7_idle,
@@ -284,4 +333,7 @@ define_machine(powernv) {
 #ifdef CONFIG_KEXEC
 	.kexec_cpu_down		= pnv_kexec_cpu_down,
 #endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+	.memory_block_size	= pnv_memory_block_size,
+#endif
 };
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index bf5fcd4..0062a43 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -31,6 +31,7 @@
 #include <asm/xics.h>
 #include <asm/opal.h>
 #include <asm/runlatch.h>
+#include <asm/code-patching.h>
 
 #include "powernv.h"
 
@@ -50,8 +51,8 @@ static void pnv_smp_setup_cpu(int cpu)
 int pnv_smp_kick_cpu(int nr)
 {
 	unsigned int pcpu = get_hard_smp_processor_id(nr);
-	unsigned long start_here = __pa(*((unsigned long *)
-					  generic_secondary_smp_init));
+	unsigned long start_here =
+			__pa(ppc_function_entry(generic_secondary_smp_init));
 	long rc;
 
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -158,17 +159,19 @@ static void pnv_smp_cpu_kill_self(void)
 	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
 	while (!generic_check_cpu_restart(cpu)) {
 		ppc64_runlatch_off();
-		power7_nap();
+		power7_nap(1);
 		ppc64_runlatch_on();
-		if (!generic_check_cpu_restart(cpu)) {
+
+		/* Reenable IRQs briefly to clear the IPI that woke us */
+		local_irq_enable();
+		local_irq_disable();
+		mb();
+
+		if (cpu_core_split_required())
+			continue;
+
+		if (!generic_check_cpu_restart(cpu))
 			DBG("CPU%d Unexpected exit while offline !\n", cpu);
-			/* We may be getting an IPI, so we re-enable
-			 * interrupts to process it, it will be ignored
-			 * since we aren't online (hopefully)
-			 */
-			local_irq_enable();
-			local_irq_disable();
-		}
 	}
 	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
 	DBG("CPU%d coming online...\n", cpu);
diff --git a/arch/powerpc/platforms/powernv/subcore-asm.S b/arch/powerpc/platforms/powernv/subcore-asm.S
new file mode 100644
index 0000000..39bb24a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/subcore-asm.S
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+
+#include "subcore.h"
+
+
+_GLOBAL(split_core_secondary_loop)
+	/*
+	 * r3 = u8 *state, used throughout the routine
+	 * r4 = temp
+	 * r5 = temp
+	 * ..
+	 * r12 = MSR
+	 */
+	mfmsr	r12
+
+	/* Disable interrupts so SRR0/1 don't get trashed */
+	li	r4,0
+	ori	r4,r4,MSR_EE|MSR_SE|MSR_BE|MSR_RI
+	andc	r4,r12,r4
+	sync
+	mtmsrd	r4
+
+	/* Switch to real mode and leave interrupts off */
+	li	r5, MSR_IR|MSR_DR
+	andc	r5, r4, r5
+
+	LOAD_REG_ADDR(r4, real_mode)
+
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r5
+	rfid
+	b	.	/* prevent speculative execution */
+
+real_mode:
+	/* Grab values from unsplit SPRs */
+	mfspr	r6,  SPRN_LDBAR
+	mfspr	r7,  SPRN_PMMAR
+	mfspr	r8,  SPRN_PMCR
+	mfspr	r9,  SPRN_RPR
+	mfspr	r10, SPRN_SDR1
+
+	/* Order reading the SPRs vs telling the primary we are ready to split */
+	sync
+
+	/* Tell thread 0 we are in real mode */
+	li	r4, SYNC_STEP_REAL_MODE
+	stb	r4, 0(r3)
+
+	li	r5, (HID0_POWER8_4LPARMODE | HID0_POWER8_2LPARMODE)@highest
+	sldi	r5, r5, 48
+
+	/* Loop until we see the split happen in HID0 */
+1:	mfspr	r4, SPRN_HID0
+	and.	r4, r4, r5
+	beq	1b
+
+	/*
+	 * We only need to initialise the below regs once for each subcore,
+	 * but it's simpler and harmless to do it on each thread.
+	 */
+
+	/* Make sure various SPRS have sane values */
+	li	r4, 0
+	mtspr	SPRN_LPID, r4
+	mtspr	SPRN_PCR, r4
+	mtspr	SPRN_HDEC, r4
+
+	/* Restore SPR values now we are split */
+	mtspr	SPRN_LDBAR, r6
+	mtspr	SPRN_PMMAR, r7
+	mtspr	SPRN_PMCR, r8
+	mtspr	SPRN_RPR, r9
+	mtspr	SPRN_SDR1, r10
+
+	LOAD_REG_ADDR(r5, virtual_mode)
+
+	/* Get out of real mode */
+	mtspr	SPRN_SRR0,r5
+	mtspr	SPRN_SRR1,r12
+	rfid
+	b	.	/* prevent speculative execution */
+
+virtual_mode:
+	blr
diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c
new file mode 100644
index 0000000..894ecb3
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/subcore.c
@@ -0,0 +1,392 @@
+/*
+ * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt)	"powernv: " fmt
+
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/smp.h>
+#include <linux/stop_machine.h>
+
+#include <asm/cputhreads.h>
+#include <asm/kvm_ppc.h>
+#include <asm/machdep.h>
+#include <asm/opal.h>
+#include <asm/smp.h>
+
+#include "subcore.h"
+
+
+/*
+ * Split/unsplit procedure:
+ *
+ * A core can be in one of three states, unsplit, 2-way split, and 4-way split.
+ *
+ * The mapping to subcores_per_core is simple:
+ *
+ *  State       | subcores_per_core
+ *  ------------|------------------
+ *  Unsplit     |        1
+ *  2-way split |        2
+ *  4-way split |        4
+ *
+ * The core is split along thread boundaries, the mapping between subcores and
+ * threads is as follows:
+ *
+ *  Unsplit:
+ *          ----------------------------
+ *  Subcore |            0             |
+ *          ----------------------------
+ *  Thread  |  0  1  2  3  4  5  6  7  |
+ *          ----------------------------
+ *
+ *  2-way split:
+ *          -------------------------------------
+ *  Subcore |        0        |        1        |
+ *          -------------------------------------
+ *  Thread  |  0   1   2   3  |  4   5   6   7  |
+ *          -------------------------------------
+ *
+ *  4-way split:
+ *          -----------------------------------------
+ *  Subcore |    0    |    1    |    2    |    3    |
+ *          -----------------------------------------
+ *  Thread  |  0   1  |  2   3  |  4   5  |  6   7  |
+ *          -----------------------------------------
+ *
+ *
+ * Transitions
+ * -----------
+ *
+ * It is not possible to transition between either of the split states, the
+ * core must first be unsplit. The legal transitions are:
+ *
+ *  -----------          ---------------
+ *  |         |  <---->  | 2-way split |
+ *  |         |          ---------------
+ *  | Unsplit |
+ *  |         |          ---------------
+ *  |         |  <---->  | 4-way split |
+ *  -----------          ---------------
+ *
+ * Unsplitting
+ * -----------
+ *
+ * Unsplitting is the simpler procedure. It requires thread 0 to request the
+ * unsplit while all other threads NAP.
+ *
+ * Thread 0 clears HID0_POWER8_DYNLPARDIS (Dynamic LPAR Disable). This tells
+ * the hardware that if all threads except 0 are napping, the hardware should
+ * unsplit the core.
+ *
+ * Non-zero threads are sent to a NAP loop, they don't exit the loop until they
+ * see the core unsplit.
+ *
+ * Core 0 spins waiting for the hardware to see all the other threads napping
+ * and perform the unsplit.
+ *
+ * Once thread 0 sees the unsplit, it IPIs the secondary threads to wake them
+ * out of NAP. They will then see the core unsplit and exit the NAP loop.
+ *
+ * Splitting
+ * ---------
+ *
+ * The basic splitting procedure is fairly straight forward. However it is
+ * complicated by the fact that after the split occurs, the newly created
+ * subcores are not in a fully initialised state.
+ *
+ * Most notably the subcores do not have the correct value for SDR1, which
+ * means they must not be running in virtual mode when the split occurs. The
+ * subcores have separate timebases SPRs but these are pre-synchronised by
+ * opal.
+ *
+ * To begin with secondary threads are sent to an assembly routine. There they
+ * switch to real mode, so they are immune to the uninitialised SDR1 value.
+ * Once in real mode they indicate that they are in real mode, and spin waiting
+ * to see the core split.
+ *
+ * Thread 0 waits to see that all secondaries are in real mode, and then begins
+ * the splitting procedure. It firstly sets HID0_POWER8_DYNLPARDIS, which
+ * prevents the hardware from unsplitting. Then it sets the appropriate HID bit
+ * to request the split, and spins waiting to see that the split has happened.
+ *
+ * Concurrently the secondaries will notice the split. When they do they set up
+ * their SPRs, notably SDR1, and then they can return to virtual mode and exit
+ * the procedure.
+ */
+
+/* Initialised at boot by subcore_init() */
+static int subcores_per_core;
+
+/*
+ * Used to communicate to offline cpus that we want them to pop out of the
+ * offline loop and do a split or unsplit.
+ *
+ * 0 - no split happening
+ * 1 - unsplit in progress
+ * 2 - split to 2 in progress
+ * 4 - split to 4 in progress
+ */
+static int new_split_mode;
+
+static cpumask_var_t cpu_offline_mask;
+
+struct split_state {
+	u8 step;
+	u8 master;
+};
+
+static DEFINE_PER_CPU(struct split_state, split_state);
+
+static void wait_for_sync_step(int step)
+{
+	int i, cpu = smp_processor_id();
+
+	for (i = cpu + 1; i < cpu + threads_per_core; i++)
+		while(per_cpu(split_state, i).step < step)
+			barrier();
+
+	/* Order the wait loop vs any subsequent loads/stores. */
+	mb();
+}
+
+static void unsplit_core(void)
+{
+	u64 hid0, mask;
+	int i, cpu;
+
+	mask = HID0_POWER8_2LPARMODE | HID0_POWER8_4LPARMODE;
+
+	cpu = smp_processor_id();
+	if (cpu_thread_in_core(cpu) != 0) {
+		while (mfspr(SPRN_HID0) & mask)
+			power7_nap(0);
+
+		per_cpu(split_state, cpu).step = SYNC_STEP_UNSPLIT;
+		return;
+	}
+
+	hid0 = mfspr(SPRN_HID0);
+	hid0 &= ~HID0_POWER8_DYNLPARDIS;
+	mtspr(SPRN_HID0, hid0);
+
+	while (mfspr(SPRN_HID0) & mask)
+		cpu_relax();
+
+	/* Wake secondaries out of NAP */
+	for (i = cpu + 1; i < cpu + threads_per_core; i++)
+		smp_send_reschedule(i);
+
+	wait_for_sync_step(SYNC_STEP_UNSPLIT);
+}
+
+static void split_core(int new_mode)
+{
+	struct {  u64 value; u64 mask; } split_parms[2] = {
+		{ HID0_POWER8_1TO2LPAR, HID0_POWER8_2LPARMODE },
+		{ HID0_POWER8_1TO4LPAR, HID0_POWER8_4LPARMODE }
+	};
+	int i, cpu;
+	u64 hid0;
+
+	/* Convert new_mode (2 or 4) into an index into our parms array */
+	i = (new_mode >> 1) - 1;
+	BUG_ON(i < 0 || i > 1);
+
+	cpu = smp_processor_id();
+	if (cpu_thread_in_core(cpu) != 0) {
+		split_core_secondary_loop(&per_cpu(split_state, cpu).step);
+		return;
+	}
+
+	wait_for_sync_step(SYNC_STEP_REAL_MODE);
+
+	/* Write new mode */
+	hid0  = mfspr(SPRN_HID0);
+	hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value;
+	mtspr(SPRN_HID0, hid0);
+
+	/* Wait for it to happen */
+	while (!(mfspr(SPRN_HID0) & split_parms[i].mask))
+		cpu_relax();
+}
+
+static void cpu_do_split(int new_mode)
+{
+	/*
+	 * At boot subcores_per_core will be 0, so we will always unsplit at
+	 * boot. In the usual case where the core is already unsplit it's a
+	 * nop, and this just ensures the kernel's notion of the mode is
+	 * consistent with the hardware.
+	 */
+	if (subcores_per_core != 1)
+		unsplit_core();
+
+	if (new_mode != 1)
+		split_core(new_mode);
+
+	mb();
+	per_cpu(split_state, smp_processor_id()).step = SYNC_STEP_FINISHED;
+}
+
+bool cpu_core_split_required(void)
+{
+	smp_rmb();
+
+	if (!new_split_mode)
+		return false;
+
+	cpu_do_split(new_split_mode);
+
+	return true;
+}
+
+static int cpu_update_split_mode(void *data)
+{
+	int cpu, new_mode = *(int *)data;
+
+	if (this_cpu_ptr(&split_state)->master) {
+		new_split_mode = new_mode;
+		smp_wmb();
+
+		cpumask_andnot(cpu_offline_mask, cpu_present_mask,
+			       cpu_online_mask);
+
+		/* This should work even though the cpu is offline */
+		for_each_cpu(cpu, cpu_offline_mask)
+			smp_send_reschedule(cpu);
+	}
+
+	cpu_do_split(new_mode);
+
+	if (this_cpu_ptr(&split_state)->master) {
+		/* Wait for all cpus to finish before we touch subcores_per_core */
+		for_each_present_cpu(cpu) {
+			if (cpu >= setup_max_cpus)
+				break;
+
+			while(per_cpu(split_state, cpu).step < SYNC_STEP_FINISHED)
+				barrier();
+		}
+
+		new_split_mode = 0;
+
+		/* Make the new mode public */
+		subcores_per_core = new_mode;
+		threads_per_subcore = threads_per_core / subcores_per_core;
+
+		/* Make sure the new mode is written before we exit */
+		mb();
+	}
+
+	return 0;
+}
+
+static int set_subcores_per_core(int new_mode)
+{
+	struct split_state *state;
+	int cpu;
+
+	if (kvm_hv_mode_active()) {
+		pr_err("Unable to change split core mode while KVM active.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * We are only called at boot, or from the sysfs write. If that ever
+	 * changes we'll need a lock here.
+	 */
+	BUG_ON(new_mode < 1 || new_mode > 4 || new_mode == 3);
+
+	for_each_present_cpu(cpu) {
+		state = &per_cpu(split_state, cpu);
+		state->step = SYNC_STEP_INITIAL;
+		state->master = 0;
+	}
+
+	get_online_cpus();
+
+	/* This cpu will update the globals before exiting stop machine */
+	this_cpu_ptr(&split_state)->master = 1;
+
+	/* Ensure state is consistent before we call the other cpus */
+	mb();
+
+	stop_machine(cpu_update_split_mode, &new_mode, cpu_online_mask);
+
+	put_online_cpus();
+
+	return 0;
+}
+
+static ssize_t __used store_subcores_per_core(struct device *dev,
+		struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	unsigned long val;
+	int rc;
+
+	/* We are serialised by the attribute lock */
+
+	rc = sscanf(buf, "%lx", &val);
+	if (rc != 1)
+		return -EINVAL;
+
+	switch (val) {
+	case 1:
+	case 2:
+	case 4:
+		if (subcores_per_core == val)
+			/* Nothing to do */
+			goto out;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	rc = set_subcores_per_core(val);
+	if (rc)
+		return rc;
+
+out:
+	return count;
+}
+
+static ssize_t show_subcores_per_core(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%x\n", subcores_per_core);
+}
+
+static DEVICE_ATTR(subcores_per_core, 0644,
+		show_subcores_per_core, store_subcores_per_core);
+
+static int subcore_init(void)
+{
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return 0;
+
+	/*
+	 * We need all threads in a core to be present to split/unsplit so
+         * continue only if max_cpus are aligned to threads_per_core.
+	 */
+	if (setup_max_cpus % threads_per_core)
+		return 0;
+
+	BUG_ON(!alloc_cpumask_var(&cpu_offline_mask, GFP_KERNEL));
+
+	set_subcores_per_core(1);
+
+	return device_create_file(cpu_subsys.dev_root,
+				  &dev_attr_subcores_per_core);
+}
+machine_device_initcall(powernv, subcore_init);
diff --git a/arch/powerpc/platforms/powernv/subcore.h b/arch/powerpc/platforms/powernv/subcore.h
new file mode 100644
index 0000000..148abc9
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/subcore.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* These are ordered and tested with <= */
+#define SYNC_STEP_INITIAL	0
+#define SYNC_STEP_UNSPLIT	1	/* Set by secondary when it sees unsplit */
+#define SYNC_STEP_REAL_MODE	2	/* Set by secondary when in real mode  */
+#define SYNC_STEP_FINISHED	3	/* Set by secondary when split/unsplit is done */
+
+#ifndef __ASSEMBLY__
+void split_core_secondary_loop(u8 *state);
+#endif
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8a8f047..0bec0c0 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -175,6 +175,36 @@ static int pseries_eeh_find_cap(struct device_node *dn, int cap)
 	return 0;
 }
 
+static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	u32 header;
+	int pos = 256;
+	int ttl = (4096 - 256) / 8;
+
+	if (!edev || !edev->pcie_cap)
+		return 0;
+	if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		return 0;
+	else if (!header)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap && pos)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < 256)
+			break;
+
+		if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+			break;
+	}
+
+	return 0;
+}
+
 /**
  * pseries_eeh_of_probe - EEH probe on the given device
  * @dn: OF node
@@ -220,7 +250,9 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 	 * or PCIe switch downstream port.
 	 */
 	edev->class_code = class_code;
+	edev->pcix_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_PCIX);
 	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
+	edev->aer_cap = pseries_eeh_find_ecap(dn, PCI_EXT_CAP_ID_ERR);
 	edev->mode &= 0xFFFFFF00;
 	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
@@ -464,6 +496,7 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
 			} else {
 				result = EEH_STATE_NOT_SUPPORT;
 			}
+			break;
 		default:
 			result = EEH_STATE_NOT_SUPPORT;
 		}
@@ -499,11 +532,19 @@ static int pseries_eeh_reset(struct eeh_pe *pe, int option)
 	/* If fundamental-reset not supported, try hot-reset */
 	if (option == EEH_RESET_FUNDAMENTAL &&
 	    ret == -8) {
+		option = EEH_RESET_HOT;
 		ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
 				config_addr, BUID_HI(pe->phb->buid),
-				BUID_LO(pe->phb->buid), EEH_RESET_HOT);
+				BUID_LO(pe->phb->buid), option);
 	}
 
+	/* We need reset hold or settlement delay */
+	if (option == EEH_RESET_FUNDAMENTAL ||
+	    option == EEH_RESET_HOT)
+		msleep(EEH_PE_RST_HOLD_TIME);
+	else
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
 	return ret;
 }
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 7f75c94..7995135 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -21,7 +21,7 @@
 #include <asm/prom.h>
 #include <asm/sparsemem.h>
 
-static unsigned long get_memblock_size(void)
+unsigned long pseries_memory_block_size(void)
 {
 	struct device_node *np;
 	unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE;
@@ -64,17 +64,6 @@ static unsigned long get_memblock_size(void)
 	return memblock_size;
 }
 
-/* WARNING: This is going to override the generic definition whenever
- * pseries is built-in regardless of what platform is active at boot
- * time. This is fine for now as this is the only "option" and it
- * should work everywhere. If not, we'll have to turn this into a
- * ppc_md. callback
- */
-unsigned long memory_block_size_bytes(void)
-{
-	return get_memblock_size();
-}
-
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static int pseries_remove_memory(u64 start, u64 size)
 {
@@ -105,7 +94,7 @@ static int pseries_remove_memblock(unsigned long base, unsigned int memblock_siz
 	if (!pfn_valid(start_pfn))
 		goto out;
 
-	block_sz = memory_block_size_bytes();
+	block_sz = pseries_memory_block_size();
 	sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
 	nid = memory_add_physaddr_to_nid(base);
 
@@ -201,7 +190,7 @@ static int pseries_update_drconf_memory(struct of_prop_reconfig *pr)
 	u32 *p;
 	int i, rc = -EINVAL;
 
-	memblock_size = get_memblock_size();
+	memblock_size = pseries_memory_block_size();
 	if (!memblock_size)
 		return -EINVAL;
 
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 444fe77..99ecf0a 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -49,7 +49,7 @@ END_FTR_SECTION(0, 1);						\
 	std	r0,16(r1);					\
 	addi	r4,r1,STK_PARAM(FIRST_REG);			\
 	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
-	bl	.__trace_hcall_entry;				\
+	bl	__trace_hcall_entry;				\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
 	ld	r3,STK_PARAM(R3)(r1);				\
@@ -83,7 +83,7 @@ END_FTR_SECTION(0, 1);						\
 	mr	r3,r6;						\
 	std	r0,16(r1);					\
 	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
-	bl	.__trace_hcall_exit;				\
+	bl	__trace_hcall_exit;				\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
 	ld	r3,STK_PARAM(R3)(r1);				\
@@ -106,7 +106,7 @@ END_FTR_SECTION(0, 1);						\
 
 	.text
 
-_GLOBAL(plpar_hcall_norets)
+_GLOBAL_TOC(plpar_hcall_norets)
 	HMT_MEDIUM
 
 	mfcr	r0
@@ -122,7 +122,7 @@ _GLOBAL(plpar_hcall_norets)
 	mtcrf	0xff,r0
 	blr				/* return r3 = status */
 
-_GLOBAL(plpar_hcall)
+_GLOBAL_TOC(plpar_hcall)
 	HMT_MEDIUM
 
 	mfcr	r0
@@ -188,7 +188,7 @@ _GLOBAL(plpar_hcall_raw)
 
 	blr				/* return r3 = status */
 
-_GLOBAL(plpar_hcall9)
+_GLOBAL_TOC(plpar_hcall9)
 	HMT_MEDIUM
 
 	mfcr	r0
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 9921953..361add6 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -64,4 +64,6 @@ extern int dlpar_detach_node(struct device_node *);
 struct pci_host_bridge;
 int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
 
+unsigned long pseries_memory_block_size(void);
+
 #endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 099d2df..f2f40e6 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -510,7 +510,11 @@ static void __init pSeries_setup_arch(void)
 static int __init pSeries_init_panel(void)
 {
 	/* Manually leave the kernel version on the panel. */
+#ifdef __BIG_ENDIAN__
 	ppc_md.progress("Linux ppc64\n", 0);
+#else
+	ppc_md.progress("Linux ppc64le\n", 0);
+#endif
 	ppc_md.progress(init_utsname()->version, 0);
 
 	return 0;
@@ -806,4 +810,7 @@ define_machine(pseries) {
 #ifdef CONFIG_KEXEC
 	.machine_kexec          = pSeries_machine_kexec,
 #endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+	.memory_block_size	= pseries_memory_block_size,
+#endif
 };
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 24f58cb..a3555b1 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -44,6 +44,7 @@
 #include <asm/xics.h>
 #include <asm/dbell.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/code-patching.h>
 
 #include "pseries.h"
 #include "offline_states.h"
@@ -96,8 +97,8 @@ int smp_query_cpu_stopped(unsigned int pcpu)
 static inline int smp_startup_cpu(unsigned int lcpu)
 {
 	int status;
-	unsigned long start_here = __pa((u32)*((unsigned long *)
-					       generic_secondary_smp_init));
+	unsigned long start_here =
+			__pa(ppc_function_entry(generic_secondary_smp_init));
 	unsigned int pcpu;
 	int start_cpu;
 
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
index 268bc89..8c79ce0 100644
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -20,6 +20,7 @@
 #include <asm/reg_a2.h>
 #include <asm/scom.h>
 #include <asm/udbg.h>
+#include <asm/code-patching.h>
 
 #include "wsp.h"
 
@@ -405,7 +406,7 @@ int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np)
 			goto fail;
 	}
 
-	start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
+	start_here = ppc_function_entry(core_setup ? generic_secondary_smp_init
 					: generic_secondary_thread_init);
 	pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
 
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 7baa70d..a19332a 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -7,6 +7,12 @@ config PPC4xx_PCI_EXPRESS
 	depends on PCI && 4xx
 	default n
 
+config PPC4xx_HSTA_MSI
+	bool
+	depends on PCI_MSI
+	depends on PCI && 4xx
+	default n
+
 config PPC4xx_MSI
 	bool
 	depends on PCI_MSI
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index afbcc37..f7cb2a1 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
+obj-$(CONFIG_PPC4xx_HSTA_MSI)	+= ppc4xx_hsta_msi.o
 obj-$(CONFIG_PPC4xx_MSI)	+= ppc4xx_msi.o
 obj-$(CONFIG_PPC4xx_CPM)	+= ppc4xx_cpm.o
 obj-$(CONFIG_PPC4xx_GPIO)	+= ppc4xx_gpio.o
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 3f415e2..4bd091a 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1150,8 +1150,7 @@ static int fsl_pci_pme_probe(struct pci_controller *hose)
 	pci = hose->private_data;
 
 	/* Enable PTOD, ENL23D & EXL23D */
-	out_be32(&pci->pex_pme_mes_disr, 0);
-	setbits32(&pci->pex_pme_mes_disr,
+	clrbits32(&pci->pex_pme_mes_disr,
 		  PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D);
 
 	out_be32(&pci->pex_pme_mes_ier, 0);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index cf2b084..c04b718 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -391,8 +391,10 @@ int fsl_rio_setup(struct platform_device *dev)
 	ops->get_inb_message = fsl_get_inb_message;
 
 	rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
-	if (!rmu_node)
+	if (!rmu_node) {
+		dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
 		goto err_rmu;
+	}
 	rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
 	if (rc) {
 		dev_err(&dev->dev, "Can't get %s property 'reg'\n",
@@ -413,6 +415,7 @@ int fsl_rio_setup(struct platform_device *dev)
 	/*set up doobell node*/
 	np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
 	if (!np) {
+		dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
 		rc = -ENODEV;
 		goto err_dbell;
 	}
@@ -441,6 +444,7 @@ int fsl_rio_setup(struct platform_device *dev)
 	/*set up port write node*/
 	np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
 	if (!np) {
+		dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
 		rc = -ENODEV;
 		goto err_pw;
 	}
@@ -633,14 +637,18 @@ int fsl_rio_setup(struct platform_device *dev)
 	return 0;
 err:
 	kfree(pw);
+	pw = NULL;
 err_pw:
 	kfree(dbell);
+	dbell = NULL;
 err_dbell:
 	iounmap(rmu_regs_win);
+	rmu_regs_win = NULL;
 err_rmu:
 	kfree(ops);
 err_ops:
 	iounmap(rio_regs_win);
+	rio_regs_win = NULL;
 err_rio_regs:
 	return rc;
 }
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
index 00e224a..b48197a 100644
--- a/arch/powerpc/sysdev/fsl_rmu.c
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -881,9 +881,9 @@ fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
 	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
 			 "msg_rx", (void *)mport);
 	if (rc < 0) {
-		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
-			rmu->msg_tx_ring.virt_buffer[i],
-			rmu->msg_tx_ring.phys_buffer[i]);
+		dma_free_coherent(priv->dev,
+			rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+			rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
 		goto out;
 	}
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8209744..be33c97 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1588,10 +1588,6 @@ void __init mpic_init(struct mpic *mpic)
 			num_timers = 8;
 	}
 
-	/* FSL mpic error interrupt intialization */
-	if (mpic->flags & MPIC_FSL_HAS_EIMR)
-		mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
-
 	/* Initialize timers to our reserved vectors and mask them for now */
 	for (i = 0; i < num_timers; i++) {
 		unsigned int offset = mpic_tm_offset(mpic, i);
@@ -1675,6 +1671,10 @@ void __init mpic_init(struct mpic *mpic)
 			irq_set_chained_handler(virq, &mpic_cascade);
 		}
 	}
+
+	/* FSL mpic error interrupt intialization */
+	if (mpic->flags & MPIC_FSL_HAS_EIMR)
+		mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
 }
 
 void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
diff --git a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
new file mode 100644
index 0000000..11c8884
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
@@ -0,0 +1,215 @@
+/*
+ * MSI support for PPC4xx SoCs using High Speed Transfer Assist (HSTA) for
+ * generation of the interrupt.
+ *
+ * Copyright © 2013 Alistair Popple <alistair@popple.id.au> IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/semaphore.h>
+#include <asm/msi_bitmap.h>
+
+struct ppc4xx_hsta_msi {
+	struct device *dev;
+
+	/* The ioremapped HSTA MSI IO space */
+	u32 __iomem *data;
+
+	/* Physical address of HSTA MSI IO space */
+	u64 address;
+	struct msi_bitmap bmp;
+
+	/* An array mapping offsets to hardware IRQs */
+	int *irq_map;
+
+	/* Number of hwirqs supported */
+	int irq_count;
+};
+static struct ppc4xx_hsta_msi ppc4xx_hsta_msi;
+
+static int hsta_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	struct msi_msg msg;
+	struct msi_desc *entry;
+	int irq, hwirq;
+	u64 addr;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		irq = msi_bitmap_alloc_hwirqs(&ppc4xx_hsta_msi.bmp, 1);
+		if (irq < 0) {
+			pr_debug("%s: Failed to allocate msi interrupt\n",
+				 __func__);
+			return irq;
+		}
+
+		hwirq = ppc4xx_hsta_msi.irq_map[irq];
+		if (hwirq == NO_IRQ) {
+			pr_err("%s: Failed mapping irq %d\n", __func__, irq);
+			return -EINVAL;
+		}
+
+		/*
+		 * HSTA generates interrupts on writes to 128-bit aligned
+		 * addresses.
+		 */
+		addr = ppc4xx_hsta_msi.address + irq*0x10;
+		msg.address_hi = upper_32_bits(addr);
+		msg.address_lo = lower_32_bits(addr);
+
+		/* Data is not used by the HSTA. */
+		msg.data = 0;
+
+		pr_debug("%s: Setup irq %d (0x%0llx)\n", __func__, hwirq,
+			 (((u64) msg.address_hi) << 32) | msg.address_lo);
+
+		if (irq_set_msi_desc(hwirq, entry)) {
+			pr_err(
+			"%s: Invalid hwirq %d specified in device tree\n",
+			__func__, hwirq);
+			msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+			return -EINVAL;
+		}
+		write_msi_msg(hwirq, &msg);
+	}
+
+	return 0;
+}
+
+static int hsta_find_hwirq_offset(int hwirq)
+{
+	int irq;
+
+	/* Find the offset given the hwirq */
+	for (irq = 0; irq < ppc4xx_hsta_msi.irq_count; irq++)
+		if (ppc4xx_hsta_msi.irq_map[irq] == hwirq)
+			return irq;
+
+	return -EINVAL;
+}
+
+static void hsta_teardown_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_desc *entry;
+	int irq;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+
+		irq = hsta_find_hwirq_offset(entry->irq);
+
+		/* entry->irq should always be in irq_map */
+		BUG_ON(irq < 0);
+		irq_set_msi_desc(entry->irq, NULL);
+		msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+		pr_debug("%s: Teardown IRQ %u (index %u)\n", __func__,
+			 entry->irq, irq);
+	}
+}
+
+static int hsta_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+	/* We don't support MSI-X */
+	if (type == PCI_CAP_ID_MSIX) {
+		pr_debug("%s: MSI-X not supported.\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hsta_msi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *mem;
+	int irq, ret, irq_count;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (IS_ERR(mem)) {
+		dev_err(dev, "Unable to get mmio space\n");
+		return -EINVAL;
+	}
+
+	irq_count = of_irq_count(dev->of_node);
+	if (!irq_count) {
+		dev_err(dev, "Unable to find IRQ range\n");
+		return -EINVAL;
+	}
+
+	ppc4xx_hsta_msi.dev = dev;
+	ppc4xx_hsta_msi.address = mem->start;
+	ppc4xx_hsta_msi.data = ioremap(mem->start, resource_size(mem));
+	ppc4xx_hsta_msi.irq_count = irq_count;
+	if (IS_ERR(ppc4xx_hsta_msi.data)) {
+		dev_err(dev, "Unable to map memory\n");
+		return -ENOMEM;
+	}
+
+	ret = msi_bitmap_alloc(&ppc4xx_hsta_msi.bmp, irq_count, dev->of_node);
+	if (ret)
+		goto out;
+
+	ppc4xx_hsta_msi.irq_map = kmalloc(sizeof(int) * irq_count, GFP_KERNEL);
+	if (IS_ERR(ppc4xx_hsta_msi.irq_map)) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
+	/* Setup a mapping from irq offsets to hardware irq numbers */
+	for (irq = 0; irq < irq_count; irq++) {
+		ppc4xx_hsta_msi.irq_map[irq] =
+			irq_of_parse_and_map(dev->of_node, irq);
+		if (ppc4xx_hsta_msi.irq_map[irq] == NO_IRQ) {
+			dev_err(dev, "Unable to map IRQ\n");
+			ret = -EINVAL;
+			goto out2;
+		}
+	}
+
+	ppc_md.setup_msi_irqs = hsta_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = hsta_teardown_msi_irqs;
+	ppc_md.msi_check_device = hsta_msi_check_device;
+	return 0;
+
+out2:
+	kfree(ppc4xx_hsta_msi.irq_map);
+
+out1:
+	msi_bitmap_free(&ppc4xx_hsta_msi.bmp);
+
+out:
+	iounmap(ppc4xx_hsta_msi.data);
+	return ret;
+}
+
+static const struct of_device_id hsta_msi_ids[] = {
+	{
+		.compatible = "ibm,hsta-msi",
+	},
+	{}
+};
+
+static struct platform_driver hsta_msi_driver = {
+	.probe = hsta_msi_probe,
+	.driver = {
+		.name = "hsta-msi",
+		.owner = THIS_MODULE,
+		.of_match_table = hsta_msi_ids,
+	},
+};
+
+static int hsta_msi_init(void)
+{
+	return platform_driver_register(&hsta_msi_driver);
+}
+subsys_initcall(hsta_msi_init);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 4914fd3..df6e2fc 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -176,8 +176,12 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
 		return -ENXIO;
 	}
 
-	/* Check that we are fully contained within 32 bits space */
-	if (res->end > 0xffffffff) {
+	/* Check that we are fully contained within 32 bits space if we are not
+	 * running on a 460sx or 476fpe which have 64 bit bus addresses.
+	 */
+	if (res->end > 0xffffffff &&
+	    !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx")
+	      || of_device_is_compatible(hose->dn, "ibm,plb-pciex-476fpe"))) {
 		printk(KERN_ERR "%s: dma-ranges outside of 32 bits space\n",
 		       hose->dn->full_name);
 		return -ENXIO;
@@ -1440,7 +1444,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 		ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
 #endif
 #ifdef CONFIG_476FPE
-	if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
+	if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")
+		|| of_device_is_compatible(np, "ibm,plb-pciex-476gtr"))
 		ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
 #endif
 	if (ppc4xx_pciex_hwops == NULL) {
@@ -1751,7 +1756,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
 				sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
 					| DCRO_PEGPL_OMRxMSKL_VAL);
-		else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+		else if (of_device_is_compatible(
+				port->node, "ibm,plb-pciex-476fpe") ||
+			of_device_is_compatible(
+				port->node, "ibm,plb-pciex-476gtr"))
 			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
 				sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
 					| DCRO_PEGPL_OMRxMSKL_VAL);
@@ -1881,7 +1889,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 			sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
 
 		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
-		    of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+		    of_device_is_compatible(
+			    port->node, "ibm,plb-pciex-476fpe") ||
+		    of_device_is_compatible(
+			    port->node, "ibm,plb-pciex-476gtr"))
 			sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
 
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 08504e7..d199bfa 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -419,7 +419,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 		get_output_lock();
 		excprint(regs);
 		if (bp) {
-			printf("cpu 0x%x stopped at breakpoint 0x%x (",
+			printf("cpu 0x%x stopped at breakpoint 0x%lx (",
 			       cpu, BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
@@ -513,7 +513,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 		excprint(regs);
 		bp = at_breakpoint(regs->nip);
 		if (bp) {
-			printf("Stopped at breakpoint %x (", BP_NUM(bp));
+			printf("Stopped at breakpoint %lx (", BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
 		if (unrecoverable_excp(regs))
@@ -759,7 +759,7 @@ static void insert_cpu_bpts(void)
 		brk.address = dabr.address;
 		brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
 		brk.len = 8;
-		set_breakpoint(&brk);
+		__set_breakpoint(&brk);
 	}
 	if (iabr && cpu_has_feature(CPU_FTR_IABR))
 		mtspr(SPRN_IABR, iabr->address
@@ -997,14 +997,14 @@ static int cpu_cmd(void)
 					last_cpu = cpu;
 				} else {
 					if (last_cpu != first_cpu)
-						printf("-%lx", last_cpu);
+						printf("-0x%lx", last_cpu);
 					last_cpu = first_cpu = cpu;
-					printf(" %lx", cpu);
+					printf(" 0x%lx", cpu);
 				}
 			}
 		}
 		if (last_cpu != first_cpu)
-			printf("-%lx", last_cpu);
+			printf("-0x%lx", last_cpu);
 		printf("\n");
 		return 0;
 	}
@@ -1024,7 +1024,7 @@ static int cpu_cmd(void)
 			/* take control back */
 			mb();
 			xmon_owner = smp_processor_id();
-			printf("cpu %u didn't take control\n", cpu);
+			printf("cpu 0x%x didn't take control\n", cpu);
 			return 0;
 		}
 		barrier();
@@ -1086,7 +1086,7 @@ csum(void)
 	fcs = 0xffff;
 	for (i = 0; i < ncsum; ++i) {
 		if (mread(adrs+i, &v, 1) == 0) {
-			printf("csum stopped at %x\n", adrs+i);
+			printf("csum stopped at "REG"\n", adrs+i);
 			break;
 		}
 		fcs = FCS(fcs, v);
@@ -1202,12 +1202,12 @@ bpt_cmds(void)
 			/* assume a breakpoint address */
 			bp = at_breakpoint(a);
 			if (bp == NULL) {
-				printf("No breakpoint at %x\n", a);
+				printf("No breakpoint at %lx\n", a);
 				break;
 			}
 		}
 
-		printf("Cleared breakpoint %x (", BP_NUM(bp));
+		printf("Cleared breakpoint %lx (", BP_NUM(bp));
 		xmon_print_symbol(bp->address, " ", ")\n");
 		bp->enabled = 0;
 		break;
@@ -1746,7 +1746,7 @@ mwrite(unsigned long adrs, void *buf, int size)
 		__delay(200);
 		n = size;
 	} else {
-		printf("*** Error writing address %x\n", adrs + n);
+		printf("*** Error writing address "REG"\n", adrs + n);
 	}
 	catch_memory_errors = 0;
 	return n;
@@ -2435,7 +2435,7 @@ static void proccall(void)
 		ret = func(args[0], args[1], args[2], args[3],
 			   args[4], args[5], args[6], args[7]);
 		sync();
-		printf("return value is %x\n", ret);
+		printf("return value is 0x%lx\n", ret);
 	} else {
 		printf("*** %x exception occurred\n", fault_except);
 	}
@@ -2700,7 +2700,7 @@ static void dump_slb(void)
 	unsigned long esid,vsid,valid;
 	unsigned long llp;
 
-	printf("SLB contents of cpu %x\n", smp_processor_id());
+	printf("SLB contents of cpu 0x%x\n", smp_processor_id());
 
 	for (i = 0; i < mmu_slb_size; i++) {
 		asm volatile("slbmfee  %0,%1" : "=r" (esid) : "r" (i));
@@ -2732,7 +2732,7 @@ static void dump_stab(void)
 	int i;
 	unsigned long *tmp = (unsigned long *)local_paca->stab_addr;
 
-	printf("Segment table contents of cpu %x\n", smp_processor_id());
+	printf("Segment table contents of cpu 0x%x\n", smp_processor_id());
 
 	for (i = 0; i < PAGE_SIZE/16; i++) {
 		unsigned long a, b;